Mercurial > emacs
view src/bytecode.c @ 1130:e18597ff3c95
*** empty log message ***
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Sun, 13 Sep 1992 20:40:20 +0000 |
parents | c1fc76b79275 |
children | 3ad82148830b |
line wrap: on
line source
/* Execution of byte code produced by bytecomp.el. Copyright (C) 1985, 1986, 1987, 1988, 1992 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. hacked on by jwz@lucid.com 17-jun-91 o added a compile-time switch to turn on simple sanity checking; o put back the obsolete byte-codes for error-detection; o added a new instruction, unbind_all, which I will use for tail-recursion elimination; o made temp_output_buffer_show be called with the right number of args; o made the new bytecodes be called with args in the right order; o added metering support. by Hallvard: o added relative jump instructions; o all conditionals now only do QUIT if they jump. */ #include "config.h" #include "lisp.h" #include "buffer.h" #include "syntax.h" /* * define BYTE_CODE_SAFE to enable some minor sanity checking (useful for * debugging the byte compiler...) * * define BYTE_CODE_METER to enable generation of a byte-op usage histogram. */ /* #define BYTE_CODE_SAFE */ /* #define BYTE_CODE_METER */ #ifdef BYTE_CODE_METER Lisp_Object Vbyte_code_meter, Qbyte_code_meter; int byte_metering_on; #define METER_2(code1, code2) \ XFASTINT (XVECTOR (XVECTOR (Vbyte_code_meter)->contents[(code1)]) \ ->contents[(code2)]) #define METER_1(code) METER_2 (0, (code)) #define METER_CODE(last_code, this_code) \ { \ if (byte_metering_on) \ { \ if (METER_1 (this_code) != ((1<<VALBITS)-1)) \ METER_1 (this_code)++; \ if (last_code \ && METER_2 (last_code, this_code) != ((1<<VALBITS)-1))\ METER_2 (last_code, this_code)++; \ } \ } #else /* no BYTE_CODE_METER */ #define METER_CODE(last_code, this_code) #endif /* no BYTE_CODE_METER */ Lisp_Object Qbytecode; /* Byte codes: */ #define Bvarref 010 #define Bvarset 020 #define Bvarbind 030 #define Bcall 040 #define Bunbind 050 #define Bnth 070 #define Bsymbolp 071 #define Bconsp 072 #define Bstringp 073 #define Blistp 074 #define Beq 075 #define Bmemq 076 #define Bnot 077 #define Bcar 0100 #define Bcdr 0101 #define Bcons 0102 #define Blist1 0103 #define Blist2 0104 #define Blist3 0105 #define Blist4 0106 #define Blength 0107 #define Baref 0110 #define Baset 0111 #define Bsymbol_value 0112 #define Bsymbol_function 0113 #define Bset 0114 #define Bfset 0115 #define Bget 0116 #define Bsubstring 0117 #define Bconcat2 0120 #define Bconcat3 0121 #define Bconcat4 0122 #define Bsub1 0123 #define Badd1 0124 #define Beqlsign 0125 #define Bgtr 0126 #define Blss 0127 #define Bleq 0130 #define Bgeq 0131 #define Bdiff 0132 #define Bnegate 0133 #define Bplus 0134 #define Bmax 0135 #define Bmin 0136 #define Bmult 0137 #define Bpoint 0140 #define Bmark 0141 /* no longer generated as of v18 */ #define Bgoto_char 0142 #define Binsert 0143 #define Bpoint_max 0144 #define Bpoint_min 0145 #define Bchar_after 0146 #define Bfollowing_char 0147 #define Bpreceding_char 0150 #define Bcurrent_column 0151 #define Bindent_to 0152 #define Bscan_buffer 0153 /* No longer generated as of v18 */ #define Beolp 0154 #define Beobp 0155 #define Bbolp 0156 #define Bbobp 0157 #define Bcurrent_buffer 0160 #define Bset_buffer 0161 #define Bread_char 0162 /* No longer generated as of v19 */ #define Bset_mark 0163 /* this loser is no longer generated as of v18 */ #define Binteractive_p 0164 /* Needed since interactive-p takes unevalled args */ #define Bforward_char 0165 #define Bforward_word 0166 #define Bskip_chars_forward 0167 #define Bskip_chars_backward 0170 #define Bforward_line 0171 #define Bchar_syntax 0172 #define Bbuffer_substring 0173 #define Bdelete_region 0174 #define Bnarrow_to_region 0175 #define Bwiden 0176 #define Bend_of_line 0177 #define Bconstant2 0201 #define Bgoto 0202 #define Bgotoifnil 0203 #define Bgotoifnonnil 0204 #define Bgotoifnilelsepop 0205 #define Bgotoifnonnilelsepop 0206 #define Breturn 0207 #define Bdiscard 0210 #define Bdup 0211 #define Bsave_excursion 0212 #define Bsave_window_excursion 0213 #define Bsave_restriction 0214 #define Bcatch 0215 #define Bunwind_protect 0216 #define Bcondition_case 0217 #define Btemp_output_buffer_setup 0220 #define Btemp_output_buffer_show 0221 #define Bunbind_all 0222 #define Bset_marker 0223 #define Bmatch_beginning 0224 #define Bmatch_end 0225 #define Bupcase 0226 #define Bdowncase 0227 #define Bstringeqlsign 0230 #define Bstringlss 0231 #define Bequal 0232 #define Bnthcdr 0233 #define Belt 0234 #define Bmember 0235 #define Bassq 0236 #define Bnreverse 0237 #define Bsetcar 0240 #define Bsetcdr 0241 #define Bcar_safe 0242 #define Bcdr_safe 0243 #define Bnconc 0244 #define Bquo 0245 #define Brem 0246 #define Bnumberp 0247 #define Bintegerp 0250 #define BRgoto 0252 #define BRgotoifnil 0253 #define BRgotoifnonnil 0254 #define BRgotoifnilelsepop 0255 #define BRgotoifnonnilelsepop 0256 #define BlistN 0257 #define BconcatN 0260 #define BinsertN 0261 #define Bconstant 0300 #define CONSTANTLIM 0100 /* Fetch the next byte from the bytecode stream */ #define FETCH *pc++ /* Fetch two bytes from the bytecode stream and make a 16-bit number out of them */ #define FETCH2 (op = FETCH, op + (FETCH << 8)) /* Push x onto the execution stack. */ /* This used to be #define PUSH(x) (*++stackp = (x)) This oddity is necessary because Alliant can't be bothered to compile the preincrement operator properly, as of 4/91. -JimB */ #define PUSH(x) (stackp++, *stackp = (x)) /* Pop a value off the execution stack. */ #define POP (*stackp--) /* Discard n values from the execution stack. */ #define DISCARD(n) (stackp -= (n)) /* Get the value which is at the top of the execution stack, but don't pop it. */ #define TOP (*stackp) DEFUN ("byte-code", Fbyte_code, Sbyte_code, 3, 3, 0, "Function used internally in byte-compiled code.\n\ The first argument is a string of byte code; the second, a vector of constants;\n\ the third, the maximum stack depth used in this function.\n\ If the third argument is incorrect, Emacs may crash.") (bytestr, vector, maxdepth) Lisp_Object bytestr, vector, maxdepth; { struct gcpro gcpro1, gcpro2, gcpro3; int count = specpdl_ptr - specpdl; #ifdef BYTE_CODE_METER int this_op = 0; int prev_op; #endif register int op; unsigned char *pc; Lisp_Object *stack; register Lisp_Object *stackp; Lisp_Object *stacke; register Lisp_Object v1, v2; register Lisp_Object *vectorp = XVECTOR (vector)->contents; #ifdef BYTE_CODE_SAFE register int const_length = XVECTOR (vector)->size; #endif /* Copy of BYTESTR, saved so we can tell if BYTESTR was relocated. */ Lisp_Object string_saved; /* Cached address of beginning of string, valid if BYTESTR equals STRING_SAVED. */ register unsigned char *strbeg; CHECK_STRING (bytestr, 0); if (XTYPE (vector) != Lisp_Vector) vector = wrong_type_argument (Qvectorp, vector); CHECK_NUMBER (maxdepth, 2); stackp = (Lisp_Object *) alloca (XFASTINT (maxdepth) * sizeof (Lisp_Object)); bzero (stackp, XFASTINT (maxdepth) * sizeof (Lisp_Object)); GCPRO3 (bytestr, vector, *stackp); gcpro3.nvars = XFASTINT (maxdepth); --stackp; stack = stackp; stacke = stackp + XFASTINT (maxdepth); /* Initialize the saved pc-pointer for fetching from the string. */ string_saved = bytestr; pc = XSTRING (string_saved)->data; while (1) { #ifdef BYTE_CODE_SAFE if (stackp > stacke) error ("Byte code stack overflow (byte compiler bug), pc %d, depth %d", pc - XSTRING (string_saved)->data, stacke - stackp); if (stackp < stack) error ("Byte code stack underflow (byte compiler bug), pc %d", pc - XSTRING (string_saved)->data); #endif if (string_saved != bytestr) { pc = pc - XSTRING (string_saved)->data + XSTRING (bytestr)->data; string_saved = bytestr; } #ifdef BYTE_CODE_METER prev_op = this_op; this_op = op = FETCH; METER_CODE (prev_op, op); switch (op) #else switch (op = FETCH) #endif { case Bvarref+6: op = FETCH; goto varref; case Bvarref+7: op = FETCH2; goto varref; case Bvarref: case Bvarref+1: case Bvarref+2: case Bvarref+3: case Bvarref+4: case Bvarref+5: op = op - Bvarref; varref: v1 = vectorp[op]; if (XTYPE (v1) != Lisp_Symbol) v2 = Fsymbol_value (v1); else { v2 = XSYMBOL (v1)->value; #ifdef SWITCH_ENUM_BUG switch ((int) XTYPE (v2)) #else switch (XTYPE (v2)) #endif { case Lisp_Symbol: if (!EQ (v2, Qunbound)) break; case Lisp_Intfwd: case Lisp_Boolfwd: case Lisp_Objfwd: case Lisp_Buffer_Local_Value: case Lisp_Some_Buffer_Local_Value: case Lisp_Buffer_Objfwd: case Lisp_Void: v2 = Fsymbol_value (v1); } } PUSH (v2); break; case Bvarset+6: op = FETCH; goto varset; case Bvarset+7: op = FETCH2; goto varset; case Bvarset: case Bvarset+1: case Bvarset+2: case Bvarset+3: case Bvarset+4: case Bvarset+5: op -= Bvarset; varset: Fset (vectorp[op], POP); break; case Bvarbind+6: op = FETCH; goto varbind; case Bvarbind+7: op = FETCH2; goto varbind; case Bvarbind: case Bvarbind+1: case Bvarbind+2: case Bvarbind+3: case Bvarbind+4: case Bvarbind+5: op -= Bvarbind; varbind: specbind (vectorp[op], POP); break; case Bcall+6: op = FETCH; goto docall; case Bcall+7: op = FETCH2; goto docall; case Bcall: case Bcall+1: case Bcall+2: case Bcall+3: case Bcall+4: case Bcall+5: op -= Bcall; docall: DISCARD (op); #ifdef BYTE_CODE_METER if (byte_metering_on && XTYPE (TOP) == Lisp_Symbol) { v1 = TOP; v2 = Fget (v1, Qbyte_code_meter); if (XTYPE (v2) == Lisp_Int && XINT (v2) != ((1<<VALBITS)-1)) { XSETINT (v2, XINT (v2) + 1); Fput (v1, Qbyte_code_meter, v2); } } #endif TOP = Ffuncall (op + 1, &TOP); break; case Bunbind+6: op = FETCH; goto dounbind; case Bunbind+7: op = FETCH2; goto dounbind; case Bunbind: case Bunbind+1: case Bunbind+2: case Bunbind+3: case Bunbind+4: case Bunbind+5: op -= Bunbind; dounbind: unbind_to (specpdl_ptr - specpdl - op, Qnil); break; case Bunbind_all: /* To unbind back to the beginning of this frame. Not used yet, but will be needed for tail-recursion elimination. */ unbind_to (count, Qnil); break; case Bgoto: QUIT; op = FETCH2; /* pc = FETCH2 loses since FETCH2 contains pc++ */ pc = XSTRING (string_saved)->data + op; break; case Bgotoifnil: op = FETCH2; if (NILP (POP)) { QUIT; pc = XSTRING (string_saved)->data + op; } break; case Bgotoifnonnil: op = FETCH2; if (!NILP (POP)) { QUIT; pc = XSTRING (string_saved)->data + op; } break; case Bgotoifnilelsepop: op = FETCH2; if (NILP (TOP)) { QUIT; pc = XSTRING (string_saved)->data + op; } else DISCARD (1); break; case Bgotoifnonnilelsepop: op = FETCH2; if (!NILP (TOP)) { QUIT; pc = XSTRING (string_saved)->data + op; } else DISCARD (1); break; case BRgoto: QUIT; pc += *pc - 127; break; case BRgotoifnil: if (NILP (POP)) { QUIT; pc += *pc - 128; } pc++; break; case BRgotoifnonnil: if (!NILP (POP)) { QUIT; pc += *pc - 128; } pc++; break; case BRgotoifnilelsepop: op = *pc++; if (NILP (TOP)) { QUIT; pc += op - 128; } else DISCARD (1); break; case BRgotoifnonnilelsepop: op = *pc++; if (!NILP (TOP)) { QUIT; pc += op - 128; } else DISCARD (1); break; case Breturn: v1 = POP; goto exit; case Bdiscard: DISCARD (1); break; case Bdup: v1 = TOP; PUSH (v1); break; case Bconstant2: PUSH (vectorp[FETCH2]); break; case Bsave_excursion: record_unwind_protect (save_excursion_restore, save_excursion_save ()); break; case Bsave_window_excursion: TOP = Fsave_window_excursion (TOP); break; case Bsave_restriction: record_unwind_protect (save_restriction_restore, save_restriction_save ()); break; case Bcatch: v1 = POP; TOP = internal_catch (TOP, Feval, v1); break; case Bunwind_protect: record_unwind_protect (0, POP); (specpdl_ptr - 1)->symbol = Qnil; break; case Bcondition_case: v1 = POP; v1 = Fcons (POP, v1); TOP = Fcondition_case (Fcons (TOP, v1)); break; case Btemp_output_buffer_setup: temp_output_buffer_setup (XSTRING (TOP)->data); TOP = Vstandard_output; break; case Btemp_output_buffer_show: v1 = POP; temp_output_buffer_show (TOP, Qnil); TOP = v1; /* pop binding of standard-output */ unbind_to (specpdl_ptr - specpdl - 1, Qnil); break; case Bnth: v1 = POP; v2 = TOP; nth_entry: CHECK_NUMBER (v2, 0); op = XINT (v2); immediate_quit = 1; while (--op >= 0) { if (CONSP (v1)) v1 = XCONS (v1)->cdr; else if (!NILP (v1)) { immediate_quit = 0; v1 = wrong_type_argument (Qlistp, v1); immediate_quit = 1; op++; } } immediate_quit = 0; goto docar; case Bsymbolp: TOP = XTYPE (TOP) == Lisp_Symbol ? Qt : Qnil; break; case Bconsp: TOP = CONSP (TOP) ? Qt : Qnil; break; case Bstringp: TOP = XTYPE (TOP) == Lisp_String ? Qt : Qnil; break; case Blistp: TOP = CONSP (TOP) || NILP (TOP) ? Qt : Qnil; break; case Beq: v1 = POP; TOP = EQ (v1, TOP) ? Qt : Qnil; break; case Bmemq: v1 = POP; TOP = Fmemq (TOP, v1); break; case Bnot: TOP = NILP (TOP) ? Qt : Qnil; break; case Bcar: v1 = TOP; docar: if (CONSP (v1)) TOP = XCONS (v1)->car; else if (NILP (v1)) TOP = Qnil; else Fcar (wrong_type_argument (Qlistp, v1)); break; case Bcdr: v1 = TOP; if (CONSP (v1)) TOP = XCONS (v1)->cdr; else if (NILP (v1)) TOP = Qnil; else Fcdr (wrong_type_argument (Qlistp, v1)); break; case Bcons: v1 = POP; TOP = Fcons (TOP, v1); break; case Blist1: TOP = Fcons (TOP, Qnil); break; case Blist2: v1 = POP; TOP = Fcons (TOP, Fcons (v1, Qnil)); break; case Blist3: DISCARD (2); TOP = Flist (3, &TOP); break; case Blist4: DISCARD (3); TOP = Flist (4, &TOP); break; case BlistN: op = FETCH; DISCARD (op - 1); TOP = Flist (op, &TOP); break; case Blength: TOP = Flength (TOP); break; case Baref: v1 = POP; TOP = Faref (TOP, v1); break; case Baset: v2 = POP; v1 = POP; TOP = Faset (TOP, v1, v2); break; case Bsymbol_value: TOP = Fsymbol_value (TOP); break; case Bsymbol_function: TOP = Fsymbol_function (TOP); break; case Bset: v1 = POP; TOP = Fset (TOP, v1); break; case Bfset: v1 = POP; TOP = Ffset (TOP, v1); break; case Bget: v1 = POP; TOP = Fget (TOP, v1); break; case Bsubstring: v2 = POP; v1 = POP; TOP = Fsubstring (TOP, v1, v2); break; case Bconcat2: DISCARD (1); TOP = Fconcat (2, &TOP); break; case Bconcat3: DISCARD (2); TOP = Fconcat (3, &TOP); break; case Bconcat4: DISCARD (3); TOP = Fconcat (4, &TOP); break; case BconcatN: op = FETCH; DISCARD (op - 1); TOP = Fconcat (op, &TOP); break; case Bsub1: v1 = TOP; if (XTYPE (v1) == Lisp_Int) { XSETINT (v1, XINT (v1) - 1); TOP = v1; } else TOP = Fsub1 (v1); break; case Badd1: v1 = TOP; if (XTYPE (v1) == Lisp_Int) { XSETINT (v1, XINT (v1) + 1); TOP = v1; } else TOP = Fadd1 (v1); break; case Beqlsign: v2 = POP; v1 = TOP; CHECK_NUMBER_OR_FLOAT_COERCE_MARKER (v1, 0); CHECK_NUMBER_OR_FLOAT_COERCE_MARKER (v2, 0); TOP = (XFLOATINT (v1) == XFLOATINT (v2)) ? Qt : Qnil; break; case Bgtr: v1 = POP; TOP = Fgtr (TOP, v1); break; case Blss: v1 = POP; TOP = Flss (TOP, v1); break; case Bleq: v1 = POP; TOP = Fleq (TOP, v1); break; case Bgeq: v1 = POP; TOP = Fgeq (TOP, v1); break; case Bdiff: DISCARD (1); TOP = Fminus (2, &TOP); break; case Bnegate: v1 = TOP; if (XTYPE (v1) == Lisp_Int) { XSETINT (v1, - XINT (v1)); TOP = v1; } else TOP = Fminus (1, &TOP); break; case Bplus: DISCARD (1); TOP = Fplus (2, &TOP); break; case Bmax: DISCARD (1); TOP = Fmax (2, &TOP); break; case Bmin: DISCARD (1); TOP = Fmin (2, &TOP); break; case Bmult: DISCARD (1); TOP = Ftimes (2, &TOP); break; case Bquo: DISCARD (1); TOP = Fquo (2, &TOP); break; case Brem: v1 = POP; TOP = Frem (TOP, v1); break; case Bpoint: XFASTINT (v1) = point; PUSH (v1); break; case Bgoto_char: TOP = Fgoto_char (TOP); break; case Binsert: TOP = Finsert (1, &TOP); break; case BinsertN: op = FETCH; DISCARD (op - 1); TOP = Finsert (op, &TOP); break; case Bpoint_max: XFASTINT (v1) = ZV; PUSH (v1); break; case Bpoint_min: XFASTINT (v1) = BEGV; PUSH (v1); break; case Bchar_after: TOP = Fchar_after (TOP); break; case Bfollowing_char: XFASTINT (v1) = PT == ZV ? 0 : FETCH_CHAR (point); PUSH (v1); break; case Bpreceding_char: XFASTINT (v1) = point <= BEGV ? 0 : FETCH_CHAR (point - 1); PUSH (v1); break; case Bcurrent_column: XFASTINT (v1) = current_column (); PUSH (v1); break; case Bindent_to: TOP = Findent_to (TOP, Qnil); break; case Beolp: PUSH (Feolp ()); break; case Beobp: PUSH (Feobp ()); break; case Bbolp: PUSH (Fbolp ()); break; case Bbobp: PUSH (Fbobp ()); break; case Bcurrent_buffer: PUSH (Fcurrent_buffer ()); break; case Bset_buffer: TOP = Fset_buffer (TOP); break; case Bread_char: PUSH (Fread_char ()); QUIT; break; case Binteractive_p: PUSH (Finteractive_p ()); break; case Bforward_char: TOP = Fforward_char (TOP); break; case Bforward_word: TOP = Fforward_word (TOP); break; case Bskip_chars_forward: v1 = POP; TOP = Fskip_chars_forward (TOP, v1); break; case Bskip_chars_backward: v1 = POP; TOP = Fskip_chars_backward (TOP, v1); break; case Bforward_line: TOP = Fforward_line (TOP); break; case Bchar_syntax: CHECK_NUMBER (TOP, 0); XFASTINT (TOP) = syntax_code_spec[(int) SYNTAX (0xFF & XINT (TOP))]; break; case Bbuffer_substring: v1 = POP; TOP = Fbuffer_substring (TOP, v1); break; case Bdelete_region: v1 = POP; TOP = Fdelete_region (TOP, v1); break; case Bnarrow_to_region: v1 = POP; TOP = Fnarrow_to_region (TOP, v1); break; case Bwiden: PUSH (Fwiden ()); break; case Bend_of_line: TOP = Fend_of_line (TOP); break; case Bset_marker: v1 = POP; v2 = POP; TOP = Fset_marker (TOP, v2, v1); break; case Bmatch_beginning: TOP = Fmatch_beginning (TOP); break; case Bmatch_end: TOP = Fmatch_end (TOP); break; case Bupcase: TOP = Fupcase (TOP); break; case Bdowncase: TOP = Fdowncase (TOP); break; case Bstringeqlsign: v1 = POP; TOP = Fstring_equal (TOP, v1); break; case Bstringlss: v1 = POP; TOP = Fstring_lessp (TOP, v1); break; case Bequal: v1 = POP; TOP = Fequal (TOP, v1); break; case Bnthcdr: v1 = POP; TOP = Fnthcdr (TOP, v1); break; case Belt: if (XTYPE (TOP) == Lisp_Cons) { /* Exchange args and then do nth. */ v2 = POP; v1 = TOP; goto nth_entry; } v1 = POP; TOP = Felt (TOP, v1); break; case Bmember: v1 = POP; TOP = Fmember (TOP, v1); break; case Bassq: v1 = POP; TOP = Fassq (TOP, v1); break; case Bnreverse: TOP = Fnreverse (TOP); break; case Bsetcar: v1 = POP; TOP = Fsetcar (TOP, v1); break; case Bsetcdr: v1 = POP; TOP = Fsetcdr (TOP, v1); break; case Bcar_safe: v1 = TOP; if (XTYPE (v1) == Lisp_Cons) TOP = XCONS (v1)->car; else TOP = Qnil; break; case Bcdr_safe: v1 = TOP; if (XTYPE (v1) == Lisp_Cons) TOP = XCONS (v1)->cdr; else TOP = Qnil; break; case Bnconc: DISCARD (1); TOP = Fnconc (2, &TOP); break; case Bnumberp: TOP = (NUMBERP (TOP) ? Qt : Qnil); break; case Bintegerp: TOP = XTYPE (TOP) == Lisp_Int ? Qt : Qnil; break; #ifdef BYTE_CODE_SAFE case Bset_mark: error ("set-mark is an obsolete bytecode"); break; case Bscan_buffer: error ("scan-buffer is an obsolete bytecode"); break; case Bmark: error ("mark is an obsolete bytecode"); break; #endif default: #ifdef BYTE_CODE_SAFE if (op < Bconstant) error ("unknown bytecode %d (byte compiler bug)", op); if ((op -= Bconstant) >= const_length) error ("no constant number %d (byte compiler bug)", op); PUSH (vectorp[op]); #else PUSH (vectorp[op - Bconstant]); #endif } } exit: UNGCPRO; /* Binds and unbinds are supposed to be compiled balanced. */ if (specpdl_ptr - specpdl != count) #ifdef BYTE_CODE_SAFE error ("binding stack not balanced (serious byte compiler bug)"); #else abort (); #endif return v1; } syms_of_bytecode () { Qbytecode = intern ("byte-code"); staticpro (&Qbytecode); defsubr (&Sbyte_code); #ifdef BYTE_CODE_METER DEFVAR_LISP ("byte-code-meter", &Vbyte_code_meter, "A vector of vectors which holds a histogram of byte-code usage.\n\ (aref (aref byte-code-meter 0) CODE) indicates how many times the byte\n\ opcode CODE has been executed.\n\ (aref (aref byte-code-meter CODE1) CODE2), where CODE1 is not 0,\n\ indicates how many times the byte opcodes CODE1 and CODE2 have been\n\ executed in succession."); DEFVAR_BOOL ("byte-metering-on", &byte_metering_on, "If non-nil, keep profiling information on byte code usage.\n\ The variable byte-code-meter indicates how often each byte opcode is used.\n\ If a symbol has a property named `byte-code-meter' whose value is an\n\ integer, it is incremented each time that symbol's function is called."); byte_metering_on = 0; Vbyte_code_meter = Fmake_vector (make_number (256), make_number (0)); Qbyte_code_meter = intern ("byte-code-meter"); staticpro (&Qbyte_code_meter); { int i = 256; while (i--) XVECTOR (Vbyte_code_meter)->contents[i] = Fmake_vector (make_number (256), make_number (0)); } #endif }