Mercurial > emacs
view lisp/fringe.el @ 83310:e58cb448e07c
Merged from miles@gnu.org--gnu-2005 (patch 80-82, 350-422)
Patches applied:
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-350
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-351
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-352
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-353
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-354
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-355
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-356
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-357
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-358
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-359
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-360
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-361
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-362
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-363
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-364
Remove "-face" suffix from widget faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-365
Remove "-face" suffix from custom faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-366
Remove "-face" suffix from change-log faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-367
Remove "-face" suffix from compilation faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-368
Remove "-face" suffix from diff-mode faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-369
lisp/longlines.el (longlines-visible-face): Face removed
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-370
Remove "-face" suffix from woman faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-371
Remove "-face" suffix from whitespace-highlight face
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-372
Remove "-face" suffix from ruler-mode faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-373
Remove "-face" suffix from show-paren faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-374
Remove "-face" suffix from log-view faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-375
Remove "-face" suffix from smerge faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-376
Remove "-face" suffix from show-tabs faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-377
Remove "-face" suffix from highlight-changes faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-378
Remove "-face" suffix from and downcase info faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-379
Remove "-face" suffix from pcvs faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-380
Update uses of renamed pcvs faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-381
Tweak ChangeLog
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-382
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-383
Remove "-face" suffix from strokes-char face
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-384
Remove "-face" suffix from compare-windows face
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-385
Remove "-face" suffix from calendar faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-386
Remove "-face" suffix from diary-button face
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-387
Remove "-face" suffix from testcover faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-388
Remove "-face" suffix from viper faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-389
Remove "-face" suffix from org faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-390
Remove "-face" suffix from sgml-namespace face
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-391
Remove "-face" suffix from table-cell face
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-392
Remove "-face" suffix from tex-mode faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-393
Remove "-face" suffix from texinfo-heading face
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-394
Remove "-face" suffix from flyspell faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-395
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-396
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-397
Remove "-face" suffix from gomoku faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-398
Remove "-face" suffix from mpuz faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-399
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-400
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-401
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-402
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-403
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-404
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-405
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-406
Merge from gnus--rel--5.10
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-407
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-408
Remove "-face" suffix from Buffer-menu-buffer face
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-409
Remove "-face" suffix from antlr-mode faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-410
Remove "-face" suffix from ebrowse faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-411
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-412
Remove "-face" suffix from flymake faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-413
Remove "-face" suffix from idlwave faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-414
Remove "-face" suffix from sh-script faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-415
Remove "-face" suffix from vhdl-mode faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-416
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-417
Remove "-face" suffix from which-func face
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-418
Remove "-face" suffix from cperl-mode faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-419
Remove "-face" suffix from ld-script faces
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-420
Fix cperl-mode font-lock problem
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-421
Tweak which-func face
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-422
Update from CVS
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-80
Merge from emacs--cvs-trunk--0
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-81
Update from CVS
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-82
Update from CVS
git-archimport-id: lorentey@elte.hu--2004/emacs--multi-tty--0--patch-350
author | Karoly Lorentey <lorentey@elte.hu> |
---|---|
date | Wed, 15 Jun 2005 12:57:51 +0000 |
parents | aac0a33f5772 |
children | 6fb026ad601f 3ebd9bdb4fe5 |
line wrap: on
line source
;;; fringe.el --- change fringes appearance in various ways ;; Copyright (C) 2002, 2003, 2004 Free Software Foundation, Inc. ;; Author: Simon Josefsson <simon@josefsson.org> ;; Maintainer: FSF ;; Keywords: frames ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to the ;; Free Software Foundation, Inc., 59 Temple Place - Suite 330, ;; Boston, MA 02111-1307, USA. ;;; Commentary: ;; This file contains helpful functions for customizing the appearance ;; of the fringe. ;; The code is influenced by scroll-bar.el and avoid.el. The author ;; gratefully acknowledge comments and suggestions made by Miles ;; Bader, Eli Zaretski, Richard Stallman, Pavel JanÃk and others which ;; improved this package. ;;; Code: (defgroup fringe nil "Window fringes." :version "22.1" :group 'frames) ;; Standard fringe bitmaps (defmacro fringe-bitmap-p (symbol) "Return non-nil if SYMBOL is a fringe bitmap." `(get ,symbol 'fringe)) (defvar fringe-bitmaps) (unless (or (not (boundp 'fringe-bitmaps)) (get 'left-truncation 'fringe)) (let ((bitmaps '(left-truncation right-truncation up-arrow down-arrow continued-line continuation-line overlay-arrow top-left-angle top-right-angle bottom-left-angle bottom-right-angle left-bracket right-bracket filled-box-cursor hollow-box-cursor hollow-square bar-cursor hbar-cursor empty-line)) (bn 2)) (while bitmaps (push (car bitmaps) fringe-bitmaps) (put (car bitmaps) 'fringe bn) (setq bitmaps (cdr bitmaps) bn (1+ bn))))) ;; Control presence of fringes (defvar fringe-mode) (defun set-fringe-mode-1 (ignore value) "Call `set-fringe-mode' with VALUE. See `fringe-mode' for valid values and their effect. This is usually invoked when setting `fringe-mode' via customize." (set-fringe-mode value)) (defun set-fringe-mode (value) "Set `fringe-mode' to VALUE and put the new value into effect. See `fringe-mode' for possible values and their effect." (setq fringe-mode value) ;; Apply it to default-frame-alist. (let ((parameter (assq 'left-fringe default-frame-alist))) (if (consp parameter) (setcdr parameter (if (consp fringe-mode) (car fringe-mode) fringe-mode)) (setq default-frame-alist (cons (cons 'left-fringe (if (consp fringe-mode) (car fringe-mode) fringe-mode)) default-frame-alist)))) (let ((parameter (assq 'right-fringe default-frame-alist))) (if (consp parameter) (setcdr parameter (if (consp fringe-mode) (cdr fringe-mode) fringe-mode)) (setq default-frame-alist (cons (cons 'right-fringe (if (consp fringe-mode) (cdr fringe-mode) fringe-mode)) default-frame-alist)))) ;; Apply it to existing frames. (let ((frames (frame-list))) (while frames (modify-frame-parameters (car frames) (list (cons 'left-fringe (if (consp fringe-mode) (car fringe-mode) fringe-mode)) (cons 'right-fringe (if (consp fringe-mode) (cdr fringe-mode) fringe-mode)))) (setq frames (cdr frames))))) ;; For initialization of fringe-mode, take account of changes ;; made explicitly to default-frame-alist. (defun fringe-mode-initialize (symbol value) (let* ((left-pair (assq 'left-fringe default-frame-alist)) (right-pair (assq 'right-fringe default-frame-alist)) (left (cdr left-pair)) (right (cdr right-pair))) (if (or left-pair right-pair) ;; If there's something in default-frame-alist for fringes, ;; don't change it, but reflect that into the value of fringe-mode. (progn (setq fringe-mode (cons left right)) (if (equal fringe-mode '(nil . nil)) (setq fringe-mode nil)) (if (equal fringe-mode '(0 . 0)) (setq fringe-mode 0))) ;; Otherwise impose the user-specified value of fringe-mode. (custom-initialize-reset symbol value)))) ;;;###autoload (defcustom fringe-mode nil "*Specify appearance of fringes on all frames. This variable can be nil (the default) meaning the fringes should have the default width (8 pixels), it can be an integer value specifying the width of both left and right fringe (where 0 means no fringe), or a cons cell where car indicates width of left fringe and cdr indicates width of right fringe (where again 0 can be used to indicate no fringe). To set this variable in a Lisp program, use `set-fringe-mode' to make it take real effect. Setting the variable with a customization buffer also takes effect. If you only want to modify the appearance of the fringe in one frame, you can use the interactive function `toggle-fringe'" :type '(choice (const :tag "Default width" nil) (const :tag "No fringes" 0) (const :tag "Only right" (0 . nil)) (const :tag "Only left" (nil . 0)) (const :tag "Half width" (5 . 5)) (const :tag "Minimal" (1 . 1)) (integer :tag "Specific width") (cons :tag "Different left/right sizes" (integer :tag "Left width") (integer :tag "Right width"))) :group 'fringe :require 'fringe :initialize 'fringe-mode-initialize :set 'set-fringe-mode-1) (defun fringe-query-style (&optional all-frames) "Query user for fringe style. Returns values suitable for left-fringe and right-fringe frame parameters. If ALL-FRAMES, the negation of the fringe values in `default-frame-alist' is used when user enters the empty string. Otherwise the negation of the fringe value in the currently selected frame parameter is used." (let ((mode (intern (completing-read "Select fringe mode for all frames (type ? for list): " '(("none") ("default") ("left-only") ("right-only") ("half") ("minimal")) nil t)))) (cond ((eq mode 'none) 0) ((eq mode 'default) nil) ((eq mode 'left-only) '(nil . 0)) ((eq mode 'right-only) '(0 . nil)) ((eq mode 'half) '(5 . 5)) ((eq mode 'minimal) '(1 . 1)) ((eq mode (intern "")) (if (eq 0 (cdr (assq 'left-fringe (if all-frames default-frame-alist (frame-parameters (selected-frame)))))) nil 0))))) ;;;###autoload (defun fringe-mode (&optional mode) "Set the default appearance of fringes on all frames. When called interactively, query the user for MODE. Valid values for MODE include `none', `default', `left-only', `right-only', `minimal' and `half'. When used in a Lisp program, MODE can be a cons cell where the integer in car specifies the left fringe width and the integer in cdr specifies the right fringe width. MODE can also be a single integer that specifies both the left and the right fringe width. If a fringe width specification is nil, that means to use the default width (8 pixels). This command may round up the left and right width specifications to ensure that their sum is a multiple of the character width of a frame. It never rounds up a fringe width of 0. Fringe widths set by `set-window-fringes' override the default fringe widths set by this command. This command applies to all frames that exist and frames to be created in the future. If you want to set the default appearance of fringes on the selected frame only, see the command `set-fringe-style'." (interactive (list (fringe-query-style 'all-frames))) (set-fringe-mode mode)) ;;;###autoload (defun set-fringe-style (&optional mode) "Set the default appearance of fringes on the selected frame. When called interactively, query the user for MODE. Valid values for MODE include `none', `default', `left-only', `right-only', `minimal' and `half'. When used in a Lisp program, MODE can be a cons cell where the integer in car specifies the left fringe width and the integer in cdr specifies the right fringe width. MODE can also be a single integer that specifies both the left and the right fringe width. If a fringe width specification is nil, that means to use the default width (8 pixels). This command may round up the left and right width specifications to ensure that their sum is a multiple of the character width of a frame. It never rounds up a fringe width of 0. Fringe widths set by `set-window-fringes' override the default fringe widths set by this command. If you want to set the default appearance of fringes on all frames, see the command `fringe-mode'." (interactive (list (fringe-query-style))) (modify-frame-parameters (selected-frame) (list (cons 'left-fringe (if (consp mode) (car mode) mode)) (cons 'right-fringe (if (consp mode) (cdr mode) mode))))) (defsubst fringe-columns (side &optional real) "Return the width, measured in columns, of the fringe area on SIDE. If optional argument REAL is non-nil, return a real floating point number instead of a rounded integer value. SIDE must be the symbol `left' or `right'." (funcall (if real '/ 'ceiling) (or (funcall (if (eq side 'left) 'car 'cadr) (window-fringes)) 0) (float (frame-char-width)))) ;; Fake defvar. Real definition using defcustom is below. The fake ;; defvar is necessary because `fringe-indicators' and ;; `set-fringe-indicators-1' mutually use each other. (defvar fringe-indicators) (defun set-fringe-indicators-1 (ignore value) "Set fringe indicators according to VALUE. This is usually invoked when setting `fringe-indicators' via customize." (setq fringe-indicators value) (setq default-indicate-empty-lines nil) (setq default-indicate-buffer-boundaries (cond ((memq value '(left right t)) value) ((eq value 'box) '((top . left) (bottom . right))) ((eq value 'mixed) '((top . left) (t . right))) ((eq value 'empty) (setq default-indicate-empty-lines t) nil) (t nil)))) ;;;###autoload (defcustom fringe-indicators nil "Visually indicate buffer boundaries and scrolling. Setting this variable, changes `default-indicate-buffer-boundaries'." :type '(choice (const :tag "No indicators" nil) (const :tag "On left" left) (const :tag "On right" right) (const :tag "Opposite, no arrows" box) (const :tag "Opposite, arrows right" mixed) (const :tag "Empty lines" empty)) :group 'fringe :require 'fringe :set 'set-fringe-indicators-1) (provide 'fringe) ;;; arch-tag: 6611ef60-0869-47ed-8b93-587ee7d3ff5d ;;; fringe.el ends here