view lisp/gud.el @ 581:e7dd969ff98b

*** empty log message ***

;; Grand Unified Debugger mode --- run gdb, sdb, dbx under Emacs control
;;	@(#)gud.el	1.10

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 1, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to
;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

;; The ancestral gdb.el was by W. Schelter <[e-mail]>
;; It was later ewritten by rms.  Some ideas were due to Masanobu. 
;; Grand Unification (sdb/dbx support) by Eric S. Raymond <[e-mail]>
;; The overloading code was then rewritten by Barry Warsaw <[e-mail]>,
;; who also hacked the mode to use comint.el.

;; Note: use of this package with sdb requires that your tags.el support
;; the find-tag-noselect entry point.  Stock distributions up to 18.57 do 
;; *not* include this feature; if it's not included with this file, email
;; [e-mail] for it or get 18.58.

(require 'comint)
(require 'tags)

;; ======================================================================
;; the overloading mechanism

(defun gud-overload-functions (gud-overload-alist)
  "Overload functions defined in GUD-OVERLOAD-ALIST.
This association list has elements of the form

     (ORIGINAL-FUNCTION-NAME  OVERLOAD-FUNCTION)"
  (let ((binding nil)
	(overloads gud-overload-alist))
    (while overloads
      (setq binding (car overloads)
	    overloads (cdr overloads))
      (fset (car binding) (symbol-function (car (cdr binding))))
      )))

(defun gud-debugger-startup (f d)
  (error "GUD not properly entered."))

(defun gud-marker-filter (proc s)
  (error "GUD not properly entered."))

(defun gud-visit-file (f)
  (error "GUD not properly entered."))

(defun gud-set-break (proc f n)
  (error "GUD not properly entered."))

;; This macro is used below to define some basic debugger interface commands.
;; Of course you may use `def-gud' with any other debugger command, including
;; user defined ones.   

(defmacro def-gud (func name key &optional doc)
  (let* ((cstr (list 'if '(not (= 1 arg))
		     (list 'format "%s %s" name 'arg) name)))
    (list 'progn
 	  (list 'defun func '(arg)
		(or doc "")
		'(interactive "p")
		(list 'gud-call cstr))
	  (list 'define-key 'gud-mode-map key  (list 'quote func)))))

;; All debugger-specific information is collected here
;; Here's how it works, in case you ever need to add a debugger to the table.
;;
;; Each entry must define the following at startup:
;;
;;<name>
;; comint-prompt-regexp
;; gud-<name>-startup-command
;; gud-<name>-marker-filter
;; gud-<name>-file-visit
;; gud-<name>-set-break
;;
;; The job of the startup-command method is to fire up a copy of the debugger,
;; given an object file and source directory.
;;
;; The job of the marker-filter method is to detect file/line markers in
;; strings and set the global gud-last-frame to indicate what display
;; action (if any) should be triggered by the marker.  Note that only
;; whetever the method *returns* is displayed in the buffer; thus, you
;; can filter the debugger's output, interpreting some and passing on
;; the rest.
;;
;; The job of the visit-file method is to visit and return the buffer indicated
;; by the car of gud-tag-frame.  This may be a file name, a tag name, or
;; something else.
;;
;; The job of the gud-set-break method is to send the commands necessary
;; to set a breakpoint at a given line in a given source file.
;;
;; Debugger-specific information begins here:

;; ======================================================================
;; gdb functions

(defun gud-gdb-debugger-startup (f d)
  (make-comint (concat "gud-" f) "gdb" nil "-fullname" "-cd" d f))

(defun gud-gdb-marker-filter (proc s)
  (if (string-match  "\032\032\\([^:\n]*\\):\\([0-9]*\\):.*\n" s)
      (progn
	(setq gud-last-frame
	      (cons
	       (substring string (match-beginning 1) (match-end 1))
	       (string-to-int
		(substring string (match-beginning 2) (match-end 2)))))
	;; this computation means the ^Z^Z-initiated marker in the
	;; input string is never emitted.
	(concat
	 (substring string 0 (match-beginning 0))
	 (substring string (match-end 0))
	 ))
    string))

(defun gud-gdb-visit-file (f)
  (find-file-noselect f))

(defun gud-gdb-set-break (proc f n) 
  (gud-call "break %s:%d" f n))

;;;###autoload
(defun gdb (path)
  "Run gdb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger."
  (interactive "fRun gdb on file: ")
  (gud-overload-functions '((gud-debugger-startup gud-gdb-debugger-startup)
			    (gud-marker-filter    gud-gdb-marker-filter)
			    (gud-visit-file       gud-gdb-visit-file)
			    (gud-set-break        gud-gdb-set-break)))

  (def-gud gud-step   "step"   "\C-cs"    "Step one source line with display")
  (def-gud gud-stepi  "stepi"  "\C-ci"    "Step one instruction with display")
  (def-gud gud-next   "next"   "\C-cn"    "Step one line (skip functions)")
  (def-gud gud-cont   "cont"   "\C-c\C-c" "Continue with display")

  (def-gud gud-finish "finish" "\C-c\C-f" "Finish executing current function")
  (def-gud gud-up     "up"     "\C-c<"    "Up N stack frames (numeric arg)")
  (def-gud gud-down   "down"   "\C-c>"    "Down N stack frames (numeric arg)")

  (gud-common-init path)

  (setq comint-prompt-regexp "^(.*gdb[+]?) *")
  (run-hooks 'gdb-mode-hook)
  )


;; ======================================================================
;; sdb functions

(defun gud-sdb-debugger-startup (f d)
  (make-comint (concat "gud-" f) "sdb" nil f "-" d))

(defun gud-sdb-marker-filter (proc str)
  (if (string-match "\\(^0x\\w* in \\|^\\|\n\\)\\([^:\n]*\\):\\([0-9]*\\):.*\n"
		    str)
      (setq gud-last-frame
	    (cons
	     (substring string (match-beginning 2) (match-end 2))
	     (string-to-int 
	      (substring string (match-beginning 3) (match-end 3))))))
  string)

(defun gud-sdb-visit-file (f)
  (find-tag-noselect f t))

(defun gud-sdb-set-break (proc f n)
  (gud-queue-send (format "e %s" f) (format "%d b" n)))

;;;###autoload
(defun sdb (path)
  "Run sdb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger."
  (if (not (and (boundp 'tags-file-name) (file-exists-p tags-file-name)))
      (error "The sdb support requires a valid tags table to work."))
  (interactive "fRun sdb on file: ")
  (gud-overload-functions '((gud-debugger-startup gud-sdb-debugger-startup)
			    (gud-marker-filter    gud-sdb-marker-filter)
			    (gud-visit-file       gud-sdb-visit-file)
			    (gud-set-break        gud-sdb-set-break)))

  (def-gud gud-step  "s"   "\C-cs" "Step one source line with display")
  (def-gud gud-stepi "i"   "\C-ci" "Step one instruction with display")
  (def-gud gud-next  "S"   "\C-cn" "Step one source line (skip functions)")
  (def-gud gud-cont  "c"   "\C-cc" "Continue with display")

  (gud-common-init path)

  (setq comint-prompt-pattern  "\\(^\\|\n\\)\\*")
  (run-hooks 'sdb-mode-hook)
  )

;; ======================================================================
;; dbx functions

(defun gud-dbx-debugger-startup (f d)
  (make-comint (concat "gud-" file) "dbx" nil f))

(defun gud-dbx-marker-filter (proc str)
  (if (string-match
       "stopped in .* at line \\([0-9]*\\) in file \"\\([^\"]*\\)\"" str)
      (setq gud-last-frame
	    (cons
	     (substring string (match-beginning 2) (match-end 2))
	     (string-to-int 
	      (substring string (match-beginning 1) (match-end 1))))))
  string)

(defun gud-dbx-visit-file (f)
  (find-file-noselect f))

(defun gud-dbx-set-break (proc f n)
  (gud-call "stop at \"%s\":%d" f n))

;;;###autoload
(defun dbx (path)
  "Run dbx on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger."
  (interactive "fRun dbx on file: ")
  (gud-overload-functions '((gud-debugger-startup gud-dbx-debugger-startup)
			    (gud-marker-filter    gud-dbx-marker-filter)
			    (gud-visit-file       gud-dbx-visit-file)
			    (gud-set-break        gud-dbx-set-break)))

  (make-local-variable 'comint-prompt-regexp)
  (setq comint-prompt-regexp  "^[^)]*dbx) *")

  (gud-common-init path)

  (run-hooks 'dbx-mode-hook)
  )

;;
;; End of debugger-specific information
;;

(defvar gud-mode-map nil
  "Keymap for gud-mode.")

(defvar gud-command-queue nil)

(if gud-mode-map
   nil
  (setq gud-mode-map (copy-keymap comint-mode-map))
  (define-key gud-mode-map "\C-l" 'gud-refresh))

(define-key ctl-x-map " " 'gud-break)
(define-key ctl-x-map "&" 'send-gud-command)


(defun gud-mode ()
  "Major mode for interacting with an inferior debugger process.
The following commands are available:

\\{gud-mode-map}

\\[gud-display-frame] displays in the other window
the last line referred to in the gud buffer.

\\[gud-step],\\[gud-next], and \\[gud-nexti] in the gud window,
do a step-one-line, step-one-line (not entering function calls), and 
step-one-instruction and then update the other window
with the current file and position.  \\[gud-cont] continues
execution.

If you are in a source file, you may set a breakpoint at the current
line in the current source file by doing \\[gud-break].

Commands:
Many commands are inherited from comint mode. 
Additionally we have:

\\[gud-display-frame] display frames file in other window
\\[gud-step] advance one line in program
\\[gud-next] advance one line in program (skip over calls).
\\[send-gud-command] used for special printing of an arg at the current point.
C-x SPACE sets break point at current line."
  (interactive)
  (comint-mode)
; (kill-all-local-variables)
  (setq major-mode 'gud-mode)
  (setq mode-name "Debugger")
  (setq mode-line-process '(": %s"))
  (use-local-map gud-mode-map)
  (make-local-variable 'gud-last-frame)
  (setq gud-last-frame nil)
  (make-local-variable 'comint-prompt-regexp)
  (run-hooks 'gud-mode-hook)
)

(defvar current-gud-buffer nil)

(defun gud-common-init (path)
  ;; perform initializations common to all debuggers
  (setq path (expand-file-name path))
  (let ((file (file-name-nondirectory path)))
    (switch-to-buffer (concat "*gud-" file "*"))
    (setq default-directory (file-name-directory path))
    (or (bolp) (newline))
    (insert "Current directory is " default-directory "\n")
    (gud-debugger-startup file default-directory))
  (gud-mode)
  (set-process-filter (get-buffer-process (current-buffer)) 'gud-filter)
  (set-process-sentinel (get-buffer-process (current-buffer)) 'gud-sentinel)
  (setq gud-command-queue nil)
  (gud-set-buffer)
  )

(defun gud-set-buffer ()
  (cond ((eq major-mode 'gud-mode)
	(setq current-gud-buffer (current-buffer)))))

(defun gud-filter (proc string)
  ;; This function is responsible for inserting output from your debugger
  ;; into the buffer.  The hard work is done by the method that is
  ;; the value of gud-marker-filter.
  (let ((inhibit-quit t))
    (gud-filter-insert proc (gud-marker-filter proc string))
    ;; If we've got queued commands and we see a prompt, pop one and send it.
    ;; In theory we should check that a prompt has been issued before sending
    ;; queued commands.  In practice, command responses from the first through
    ;; penultimate elements of a command sequence are short enough that we
    ;; don't really have to bother.
    (if gud-command-queue
	(progn
	  (gud-call (car gud-command-queue))
	  (setq gud-command-queue (cdr gud-command-queue))
	  )
      )))

(defun gud-filter-insert (proc string)
  ;; Here's where the actual buffer insertion is done
  (let ((moving (= (point) (process-mark proc)))
	(output-after-point (< (point) (process-mark proc)))
	(old-buffer (current-buffer))
	start)
    (set-buffer (process-buffer proc))
    (unwind-protect
	(save-excursion
	  ;; Insert the text, moving the process-marker.
	  (goto-char (process-mark proc))
	  (setq start (point))
	  (insert-before-markers string)
	  (set-marker (process-mark proc) (point))
	  ;; Check for a filename-and-line number.
	  ;; Don't display the specified file
	  ;; unless (1) point is at or after the position where output appears
	  ;; and (2) this buffer is on the screen.
	  (if (and gud-last-frame (not output-after-point)
		  (get-buffer-window (current-buffer)))
	      (gud-display-frame))
	  )
      (set-buffer old-buffer))
    (if moving (goto-char (process-mark proc)))))

(defun gud-sentinel (proc msg)
  (cond ((null (buffer-name (process-buffer proc)))
	 ;; buffer killed
	 ;; Stop displaying an arrow in a source file.
	 (setq overlay-arrow-position nil)
	 (set-process-buffer proc nil))
	((memq (process-status proc) '(signal exit))
	 ;; Stop displaying an arrow in a source file.
	 (setq overlay-arrow-position nil)
	 ;; Fix the mode line.
	 (setq mode-line-process
	       (concat ": "
		       (symbol-name (process-status proc))))
	 (let* ((obuf (current-buffer)))
	   ;; save-excursion isn't the right thing if
	   ;;  process-buffer is current-buffer
	   (unwind-protect
	       (progn
		 ;; Write something in *compilation* and hack its mode line,
		 (set-buffer (process-buffer proc))
		 ;; Force mode line redisplay soon
		 (set-buffer-modified-p (buffer-modified-p))
		 (if (eobp)
		     (insert ?\n mode-name " " msg)
		   (save-excursion
		     (goto-char (point-max))
		     (insert ?\n mode-name " " msg)))
		 ;; If buffer and mode line will show that the process
		 ;; is dead, we can delete it now.  Otherwise it
		 ;; will stay around until M-x list-processes.
		 (delete-process proc))
	     ;; Restore old buffer, but don't restore old point
	     ;; if obuf is the gud buffer.
	     (set-buffer obuf))))))


(defun gud-refresh (&optional arg)
  "Fix up a possibly garbled display, and redraw the arrow."
  (interactive "P")
  (recenter arg)
  (gud-display-frame))

(defun gud-display-frame ()
  "Find and obey the last filename-and-line marker from the debugger.
Obeying it means displaying in another window the specified file and line."
  (interactive)
  (if gud-last-frame
   (progn 
     (gud-set-buffer)
     (gud-display-line (car gud-last-frame) (cdr gud-last-frame))
     (setq gud-last-frame nil))))

;; Make sure the file named TRUE-FILE is in a buffer that appears on the screen
;; and that its line LINE is visible.
;; Put the overlay-arrow on the line LINE in that buffer.

(defun gud-display-line (true-file line)
  (let* ((buffer (gud-visit-file true-file))
	 (window (display-buffer buffer t))
	 (pos))
    (save-excursion
      (set-buffer buffer)
      (save-restriction
	(widen)
	(goto-line line)
	(setq pos (point))
	(setq overlay-arrow-string "=>")
	(or overlay-arrow-position
	    (setq overlay-arrow-position (make-marker)))
	(set-marker overlay-arrow-position (point) (current-buffer)))
      (cond ((or (< pos (point-min)) (> pos (point-max)))
	     (widen)
	     (goto-char pos))))
    (set-window-point window overlay-arrow-position)))

(defun gud-call (command &rest args)
  "Invoke the debugger COMMAND displaying source in other window."
  (interactive)
  (gud-set-buffer)
  (goto-char (point-max))
  (let ((command (concat (apply 'format command args) "\n"))
	(proc (get-buffer-process current-gud-buffer)))
    (gud-filter-insert proc command)
    (send-string proc command)
    ))

(defun gud-queue-send (&rest cmdlist)
  ;; Send the first command, queue the rest for send after successive
  ;; send on subsequent prompts
  (interactive)
  (gud-call (car cmdlist))
  (setq gud-command-queue (append gud-command-queue (cdr cmdlist))))

(defun gud-apply-from-source (func)
  ;; Apply a method from the gud buffer environment, passing it file and line.
  ;; This is intended to be used for gud commands called from a source file.
  (if (not buffer-file-name)
      (error "There is no file associated with this buffer")) 
  (let ((file (file-name-nondirectory buffer-file-name))
	(line (save-restriction (widen) (1+ (count-lines 1 (point))))))
    (save-excursion
      (gud-set-buffer)
      (funcall func
	       (get-buffer-process current-gud-buffer)
	       file
	       line)
      )))

(defun gud-break ()
  "Set breakpoint at this source line."
  (interactive)
  (gud-apply-from-source 'gud-set-break))

(defun gud-read-address()
  "Return a string containing the core-address found in the buffer at point."
  (save-excursion
   (let ((pt (dot)) found begin)
     (setq found (if (search-backward "0x" (- pt 7) t)(dot)))
     (cond (found (forward-char 2)
		  (setq result
			(buffer-substring found
				 (progn (re-search-forward "[^0-9a-f]")
					(forward-char -1)
					(dot)))))
	   (t (setq begin (progn (re-search-backward "[^0-9]") (forward-char 1)
				 (dot)))
	      (forward-char 1)
	      (re-search-forward "[^0-9]")
	      (forward-char -1)
	      (buffer-substring begin (dot)))))))


(defvar gud-commands nil
  "List of strings or functions used by send-gud-command.
It is for customization by you.")

(defun send-gud-command (arg)

  "This command reads the number where the cursor is positioned.  It
 then inserts this ADDR at the end of the debugger buffer.  A numeric arg
 selects the ARG'th member COMMAND of the list gud-print-command.  If
 COMMAND is a string, (format COMMAND ADDR) is inserted, otherwise
 (funcall COMMAND ADDR) is inserted.  eg. \"p (rtx)%s->fld[0].rtint\"
 is a possible string to be a member of gud-commands.  "


  (interactive "P")
  (let (comm addr)
    (if arg (setq comm (nth arg gud-commands)))
    (setq addr (gud-read-address))
    (if (eq (current-buffer) current-gud-buffer)
	(set-mark (point)))
    (cond (comm
	   (setq comm
		 (if (stringp comm) (format comm addr) (funcall comm addr))))
	  (t (setq comm addr)))
    (switch-to-buffer current-gud-buffer)
    (goto-char (dot-max))
    (insert-string comm)))

;; gud.e ends here