view src/.gdbinit-union @ 83064:e7e9448cb3a0

Make emacsclient refuse to create a frame inside an Emacs term buffer. lib-src/emacsclient.c (main): Exit with failure if the terminal type is `eterm' (Emacs term buffer). git-archimport-id: [e-mail]--2004/emacs--multi-tty--0--patch-104

# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000, 2001
#   Free Software Foundation, Inc.
#
# This file is part of GNU Emacs.
#
# GNU Emacs is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GNU Emacs; see the file COPYING.  If not, write to the
# Free Software Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.

# Force loading of symbols, enough to give us gdb_valbits etc.
set main

# Find lwlib source files too.
dir ../lwlib
#dir /gd/gnu/lesstif-0.89.9/lib/Xm

# Don't enter GDB when user types C-g to quit.
# This has one unfortunate effect: you can't type C-c
# at the GDB to stop Emacs, when using X.
# However, C-z works just as well in that case.
handle 2 noprint pass

# Don't pass SIGALRM to Emacs.  This makes problems when
# debugging.
handle SIGALRM ignore

# Set up a mask to use.
# This should be EMACS_INT, but in some cases that is a macro.
# long ought to work in all cases right now.
set $valmask = ((long)1 << gdb_valbits) - 1
set $nonvalbits = gdb_emacs_intbits - gdb_valbits

# Set up something to print out s-expressions.
define pr
set debug_print ($)
end
document pr
Print the emacs s-expression which is $.
Works only when an inferior emacs is executing.
end

define xtype
output (enum Lisp_Type) (($.i >> gdb_valbits) & 0x7)
echo \n
output ((($.i >> gdb_valbits) & 0x7) == Lisp_Misc ? (enum Lisp_Misc_Type) (((struct Lisp_Free *) (($.i & $valmask) | gdb_data_seg_bits))->type) : (($.i >> gdb_valbits) & 0x7) == Lisp_Vectorlike ? ($size = ((struct Lisp_Vector *) (($.i & $valmask) | gdb_data_seg_bits))->size, (enum pvec_type) (($size & PVEC_FLAG) ? $size & PVEC_TYPE_MASK : 0)) : 0)
echo \n
end
document xtype
Print the type of $, assuming it is an Emacs Lisp value.
If the first type printed is Lisp_Vector or Lisp_Misc,
the second line gives the more precise type.
Otherwise the second line doesn't mean anything.
end

define xvectype
  set $size = ((struct Lisp_Vector *) (($.i & $valmask) | gdb_data_seg_bits))->size
  output (enum pvec_type) (($size & PVEC_FLAG) ? $size & PVEC_TYPE_MASK : 0)
  echo \n
end
document xvectype
  Print the vector subtype of $, assuming it is a vector or pseudovector.
end

define xmisctype
  output (enum Lisp_Misc_Type) (((struct Lisp_Free *) (($.i & $valmask) | gdb_data_seg_bits))->type)
  echo \n
end
document xmisctype
  Print the specific type of $, assuming it is some misc type.
end

define xint
  print (($.i & $valmask) << $nonvalbits) >> $nonvalbits
end
document xint
  Print $, assuming it is an Emacs Lisp integer.  This gets the sign right.
end

define xptr
  print (void *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xptr
  Print the pointer portion of $, assuming it is an Emacs Lisp value.
end

define xmarker
  print (struct Lisp_Marker *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xmarker
  Print $ as a marker pointer, assuming it is an Emacs Lisp marker value.
end

define xoverlay
  print (struct Lisp_Overlay *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xoverlay
  Print $ as a overlay pointer, assuming it is an Emacs Lisp overlay value.
end

define xmiscfree
  print (struct Lisp_Free *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xmiscfree
  Print $ as a misc free-cell pointer, assuming it is an Emacs Lisp Misc value.
end

define xintfwd
  print (struct Lisp_Intfwd *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xintfwd
  Print $ as an integer forwarding pointer, assuming it is an Emacs Lisp Misc value.
end

define xboolfwd
  print (struct Lisp_Boolfwd *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xboolfwd
  Print $ as a boolean forwarding pointer, assuming it is an Emacs Lisp Misc value.
end

define xobjfwd
  print (struct Lisp_Objfwd *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xobjfwd
  Print $ as an object forwarding pointer, assuming it is an Emacs Lisp Misc value.
end

define xbufobjfwd
  print (struct Lisp_Buffer_Objfwd *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xbufobjfwd
  Print $ as a buffer-local object forwarding pointer, assuming it is an Emacs Lisp Misc value.
end

define xkbobjfwd
  print (struct Lisp_Kboard_Objfwd *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xkbobjfwd
  Print $ as a kboard-local object forwarding pointer, assuming it is an Emacs Lisp Misc value.
end

define xbuflocal
  print (struct Lisp_Buffer_Local_Value *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xbuflocal
  Print $ as a buffer-local-value pointer, assuming it is an Emacs Lisp Misc value.
end

define xsymbol
  print (struct Lisp_Symbol *) (($.i & $valmask) | gdb_data_seg_bits)
  xprintsymptr $
end
document xsymbol
  Print the name and address of the symbol $.
  This command assumes that $ is an Emacs Lisp symbol value.
end

define xstring
  print (struct Lisp_String *) (($.i & $valmask) | gdb_data_seg_bits)
  output ($->size > 1000) ? 0 : ($->data[0])@($->size_byte < 0 ? $->size : $->size_byte)
  echo \n
end
document xstring
  Print the contents and address of the string $.
  This command assumes that $ is an Emacs Lisp string value.
end

define xvector
  print (struct Lisp_Vector *) (($.i & $valmask) | gdb_data_seg_bits)
  output ($->size > 50) ? 0 : ($->contents[0])@($->size)
  echo \n
end
document xvector
  Print the contents and address of the vector $.
  This command assumes that $ is an Emacs Lisp vector value.
end

define xprocess
  print (struct Lisp_Process *) (($.i & $valmask) | gdb_data_seg_bits)
  output *$
  echo \n
end
document xprocess
  Print the address of the struct Lisp_process which the Lisp_Object $ points to.
end

define xframe
  print (struct frame *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xframe
  Print $ as a frame pointer, assuming it is an Emacs Lisp frame value.
end

define xcompiled
  print (struct Lisp_Vector *) (($.i & $valmask) | gdb_data_seg_bits)
  output ($->contents[0])@($->size & 0xff)
end
document xcompiled
  Print $ as a compiled function pointer, assuming it is an Emacs Lisp compiled value.
end

define xwindow
  print (struct window *) (($.i & $valmask) | gdb_data_seg_bits)
  printf "%dx%d+%d+%d\n", $->width, $->height, $->left, $->top
end
document xwindow
  Print $ as a window pointer, assuming it is an Emacs Lisp window value.
  Print the window's position as "WIDTHxHEIGHT+LEFT+TOP".
end

define xwinconfig
  print (struct save_window_data *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xwinconfig
  Print $ as a window configuration pointer, assuming it is an Emacs Lisp window configuration value.
end

define xsubr
  print (struct Lisp_Subr *) (($.i & $valmask) | gdb_data_seg_bits)
  output *$
  echo \n
end
document xsubr
  Print the address of the subr which the Lisp_Object $ points to.
end

define xchartable
  print (struct Lisp_Char_Table *) (($.i & $valmask) | gdb_data_seg_bits)
  printf "Purpose: "
  output (char*)&((struct Lisp_Symbol *) (($->purpose.i & $valmask) | gdb_data_seg_bits))->name->data
  printf "  %d extra slots", ($->size & 0x1ff) - 388
  echo \n
end
document xchartable
  Print the address of the char-table $, and its purpose.
  This command assumes that $ is an Emacs Lisp char-table value.
end

define xboolvector
  print (struct Lisp_Bool_Vector *) (($.i & $valmask) | gdb_data_seg_bits)
  output ($->size > 256) ? 0 : ($->data[0])@(($->size + 7)/ 8)
  echo \n
end
document xboolvector
  Print the contents and address of the bool-vector $.
  This command assumes that $ is an Emacs Lisp bool-vector value.
end

define xbuffer
  print (struct buffer *) (($.i & $valmask) | gdb_data_seg_bits)
  output ((struct Lisp_String *) (($->name.i & $valmask) | gdb_data_seg_bits))->data
  echo \n
end
document xbuffer
  Set $ as a buffer pointer, assuming it is an Emacs Lisp buffer value.
  Print the name of the buffer.
end

define xhashtable
  print (struct Lisp_Hash_Table *) (($.i & $valmask) | gdb_data_seg_bits)
end
document xhashtable
  Set $ as a hash table pointer, assuming it is an Emacs Lisp hash table value.
end

define xcons
  print (struct Lisp_Cons *) (($.i & $valmask) | gdb_data_seg_bits)
  output/x *$
  echo \n
end
document xcons
  Print the contents of $, assuming it is an Emacs Lisp cons.
end

define nextcons
  p $.cdr
  xcons
end
document nextcons
  Print the contents of the next cell in a list.
  This assumes that the last thing you printed was a cons cell contents
  (type struct Lisp_Cons) or a pointer to one.
end

define xcar
  print/x ((($.i >> gdb_valbits) & 0xf) == Lisp_Cons ? ((struct Lisp_Cons *) (($.i & $valmask) | gdb_data_seg_bits))->car : 0)
end
document xcar
  Print the car of $, assuming it is an Emacs Lisp pair.
end

define xcdr
  print/x ((($.i >> gdb_valbits) & 0xf) == Lisp_Cons ? ((struct Lisp_Cons *) (($.i & $valmask) | gdb_data_seg_bits))->cdr : 0)
end
document xcdr
  Print the cdr of $, assuming it is an Emacs Lisp pair.
end

define xfloat
  print ((struct Lisp_Float *) (($.i & $valmask) | gdb_data_seg_bits))->data
end
document xfloat
  Print $ assuming it is a lisp floating-point number.
end

define xscrollbar
  print (struct scrollbar *) (($.i & $valmask) | gdb_data_seg_bits)
  output *$
  echo \n
end
document xscrollbar
  Print $ as a scrollbar pointer.
end

define xprintsym
  set $sym = ((struct Lisp_Symbol *) (($arg0.i & $valmask) | gdb_data_seg_bits))
  xprintsymptr $sym
end
document xprintsym
  Print argument as a symbol.
end
define xprintsymptr
  set $sym = $arg0
  set $sym_name = ((struct Lisp_String *)(($sym->xname.i & $valmask) | gdb_data_seg_bits))
  output ($sym_name->data[0])@($sym_name->size_byte < 0 ? $sym_name->size : $sym_name->size_byte)
  echo \n
end

define xbacktrace
  set $bt = backtrace_list
  while $bt
    set $type = (enum Lisp_Type) (((*$bt->function).i >> gdb_valbits) & 0x7)
    if $type == Lisp_Symbol
      xprintsym (*$bt->function)
    else
      printf "0x%x ", (*$bt->function).i
      if $type == Lisp_Vectorlike
        set $size = ((struct Lisp_Vector *) (((*$bt->function).i & $valmask) | gdb_data_seg_bits))->size
        output (enum pvec_type) (($size & PVEC_FLAG) ? $size & PVEC_TYPE_MASK : 0)
      else
        printf "Lisp type %d", $type
      end
      echo \n
    end
    set $bt = $bt->next
  end
end
document xbacktrace
  Print a backtrace of Lisp function calls from backtrace_list.
  Set a breakpoint at Fsignal and call this to see from where
  an error was signaled.
end

define xreload
  set $valmask = ((long)1 << gdb_valbits) - 1
  set $nonvalbits = gdb_emacs_intbits - gdb_valbits
end
document xreload
  When starting Emacs a second time in the same gdb session under
  FreeBSD 2.2.5, gdb 4.13, $valmask and $nonvalbits have lost
  their values.  (The same happens on current (2000) versions of GNU/Linux
  with gdb 5.0.)
  This function reloads them.
end

define hook-run
  xreload
end

# Call xreload if a new Emacs executable is loaded.
define hookpost-run
  xreload
end

set print pretty on
set print sevenbit-strings

# show environment DISPLAY
# show environment TERM
# set args -geometry 80x40+0+0

# Don't let abort actually run, as it will make
# stdio stop working and therefore the `pr' command above as well.
# break abort

# If we are running in synchronous mode, we want a chance to look around
# before Emacs exits.  Perhaps we should put the break somewhere else
# instead...
# break x_error_quitter

# arch-tag: 08f4d20d-0254-4374-a80c-179d5a517915