view src/cmds.c @ 3779:e9961fa24193

*solar.el (solar-setup, solar-ephemeris-time, sunrise-sunset): Change Universal Time (UT) to Coordinated Universal Time (UTC). (solar-time-string): Use calendar-daylight-time-offset instead of 1 hr, and use calendar-daylight-savings-switchover-time instead of midnight. Add an optional parameter to allow forcing the use of standard or daylight savings time. Fix code so it works in southern hemisphere (start of dst precedes end of dst in a calendar year) and when dst either starts or ends in a calendar year, but not both.

/* Simple built-in editing commands.
   Copyright (C) 1985, 1993 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING.  If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */


#include "config.h"
#include "lisp.h"
#include "commands.h"
#include "buffer.h"
#include "syntax.h"

Lisp_Object Qkill_forward_chars, Qkill_backward_chars, Vblink_paren_function;

/* A possible value for a buffer's overwrite-mode variable.  */
Lisp_Object Qoverwrite_mode_binary;


DEFUN ("forward-char", Fforward_char, Sforward_char, 0, 1, "p",
  "Move point right ARG characters (left if ARG negative).\n\
On reaching end of buffer, stop and signal error.")
  (n)
     Lisp_Object n;
{
  if (NILP (n))
    XFASTINT (n) = 1;
  else
    CHECK_NUMBER (n, 0);

  /* This used to just set point to point + XINT (n), and then check
     to see if it was within boundaries.  But now that SET_PT can
     potentially do a lot of stuff (calling entering and exiting
     hooks, etcetera), that's not a good approach.  So we validate the
     proposed position, then set point.  */
  {
    int new_point = point + XINT (n);

    if (new_point < BEGV)
      {
	SET_PT (BEGV);
	Fsignal (Qbeginning_of_buffer, Qnil);
      }
    if (new_point > ZV)
      {
	SET_PT (ZV);
	Fsignal (Qend_of_buffer, Qnil);
      }

    SET_PT (new_point);
  }

  return Qnil;
}

DEFUN ("backward-char", Fbackward_char, Sbackward_char, 0, 1, "p",
  "Move point left ARG characters (right if ARG negative).\n\
On attempt to pass beginning or end of buffer, stop and signal error.")
  (n)
     Lisp_Object n;
{
  if (NILP (n))
    XFASTINT (n) = 1;
  else
    CHECK_NUMBER (n, 0);

  XSETINT (n, - XINT (n));
  return Fforward_char (n);
}

DEFUN ("forward-line", Fforward_line, Sforward_line, 0, 1, "p",
  "Move ARG lines forward (backward if ARG is negative).\n\
Precisely, if point is on line I, move to the start of line I + ARG.\n\
If there isn't room, go as far as possible (no error).\n\
Returns the count of lines left to move.  If moving forward,\n\
that is ARG - number of lines moved; if backward, ARG + number moved.\n\
With positive ARG, a non-empty line at the end counts as one line\n\
  successfully moved (for the return value).")
  (n)
     Lisp_Object n;
{
  int pos2 = point;
  int pos;
  int count, shortage, negp;

  if (NILP (n))
    count = 1;
  else
    {
      CHECK_NUMBER (n, 0);
      count = XINT (n);
    }

  negp = count <= 0;
  pos = scan_buffer ('\n', pos2, count - negp, &shortage);
  if (shortage > 0
      && (negp
	  || (ZV > BEGV
	      && pos != pos2
	      && FETCH_CHAR (pos - 1) != '\n')))
    shortage--;
  SET_PT (pos);
  return make_number (negp ? - shortage : shortage);
}

DEFUN ("beginning-of-line", Fbeginning_of_line, Sbeginning_of_line,
  0, 1, "p",
  "Move point to beginning of current line.\n\
With argument ARG not nil or 1, move forward ARG - 1 lines first.\n\
If scan reaches end of buffer, stop there without error.")
  (n)
     Lisp_Object n;
{
  if (NILP (n))
    XFASTINT (n) = 1;
  else
    CHECK_NUMBER (n, 0);

  Fforward_line (make_number (XINT (n) - 1));
  return Qnil;
}

DEFUN ("end-of-line", Fend_of_line, Send_of_line,
  0, 1, "p",
  "Move point to end of current line.\n\
With argument ARG not nil or 1, move forward ARG - 1 lines first.\n\
If scan reaches end of buffer, stop there without error.")
  (n)
     Lisp_Object n;
{
  register int pos;
  register int stop;

  if (NILP (n))
    XFASTINT (n) = 1;
  else
    CHECK_NUMBER (n, 0);

  if (XINT (n) != 1)
    Fforward_line (make_number (XINT (n) - 1));

  pos = point;
  stop = ZV;
  while (pos < stop && FETCH_CHAR (pos) != '\n') pos++;
  SET_PT (pos);

  return Qnil;
}

DEFUN ("delete-char", Fdelete_char, Sdelete_char, 1, 2, "p\nP",
  "Delete the following ARG characters (previous, with negative arg).\n\
Optional second arg KILLFLAG non-nil means kill instead (save in kill ring).\n\
Interactively, ARG is the prefix arg, and KILLFLAG is set if\n\
ARG was explicitly specified.")
  (n, killflag)
     Lisp_Object n, killflag;
{
  CHECK_NUMBER (n, 0);

  if (NILP (killflag))
    {
      if (XINT (n) < 0)
	{
	  if (point + XINT (n) < BEGV)
	    Fsignal (Qbeginning_of_buffer, Qnil);
	  else
	    del_range (point + XINT (n), point);
	}
      else
	{
	  if (point + XINT (n) > ZV)
	    Fsignal (Qend_of_buffer, Qnil);
	  else
	    del_range (point, point + XINT (n));
	}
    }
  else
    {
      call1 (Qkill_forward_chars, n);
    }
  return Qnil;
}

DEFUN ("delete-backward-char", Fdelete_backward_char, Sdelete_backward_char,
  1, 2, "p\nP",
  "Delete the previous ARG characters (following, with negative ARG).\n\
Optional second arg KILLFLAG non-nil means kill instead (save in kill ring).\n\
Interactively, ARG is the prefix arg, and KILLFLAG is set if\n\
ARG was explicitly specified.")
  (n, killflag)
     Lisp_Object n, killflag;
{
  CHECK_NUMBER (n, 0);
  return Fdelete_char (make_number (-XINT (n)), killflag);
}

DEFUN ("self-insert-command", Fself_insert_command, Sself_insert_command, 1, 1, "p",
  "Insert the character you type.\n\
Whichever character you type to run this command is inserted.")
  (arg)
     Lisp_Object arg;
{
  CHECK_NUMBER (arg, 0);

  /* Barf if the key that invoked this was not a character.  */
  if (XTYPE (last_command_char) != Lisp_Int)
    bitch_at_user ();
  else
    while (XINT (arg) > 0)
      {
	XFASTINT (arg)--;	/* Ok since old and new vals both nonneg */
	internal_self_insert (XINT (last_command_char), XFASTINT (arg) != 0);
      }

  return Qnil;
}

DEFUN ("newline", Fnewline, Snewline, 0, 1, "P",
  "Insert a newline.  With arg, insert that many newlines.\n\
In Auto Fill mode, if no numeric arg, break the preceding line if it's long.")
  (arg1)
     Lisp_Object arg1;
{
  int flag;
  Lisp_Object arg;
  char c1 = '\n';

  arg = Fprefix_numeric_value (arg1);

  if (!NILP (current_buffer->read_only))
    Fbarf_if_buffer_read_only ();

  /* Inserting a newline at the end of a line produces better
     redisplay in try_window_id than inserting at the beginning of a
     line, and the textual result is the same.  So, if we're at
     beginning of line, pretend to be at the end of the previous line.  

     We can't use internal_self_insert in that case since it won't do
     the insertion correctly.  Luckily, internal_self_insert's special
     features all do nothing in that case.  */

  flag = point > BEGV && FETCH_CHAR (point - 1) == '\n';
  if (flag)
    SET_PT (point - 1);

  while (XINT (arg) > 0)
    {
      if (flag)
	insert (&c1, 1);
      else
	internal_self_insert ('\n', !NILP (arg1));
      XFASTINT (arg)--;		/* Ok since old and new vals both nonneg */
    }

  if (flag)
    SET_PT (point + 1);

  return Qnil;
}

/* Insert character C1.  If NOAUTOFILL is nonzero, don't do autofill
   even if it is enabled.

   If this insertion is suitable for direct output (completely simple),
   return 0.  A value of 1 indicates this *might* not have been simple.  */

internal_self_insert (c1, noautofill)
     char c1;
     int noautofill;
{
  extern Lisp_Object Fexpand_abbrev ();
  int hairy = 0;
  Lisp_Object tem;
  register enum syntaxcode synt;
  register int c = c1;
  Lisp_Object overwrite = current_buffer->overwrite_mode;

  if (!NILP (Vbefore_change_function) || !NILP (Vafter_change_function))
    hairy = 1;

  if (!NILP (overwrite)
      && point < ZV
      && (EQ (overwrite, Qoverwrite_mode_binary)
	  || (c != '\n' && FETCH_CHAR (point) != '\n'))
      && (EQ (overwrite, Qoverwrite_mode_binary)
	  || FETCH_CHAR (point) != '\t'
	  || XINT (current_buffer->tab_width) <= 0
	  || XFASTINT (current_buffer->tab_width) > 20
	  || !((current_column () + 1) % XFASTINT (current_buffer->tab_width))))
    {
      del_range (point, point + 1);
      hairy = 1;
    }
  if (!NILP (current_buffer->abbrev_mode)
      && SYNTAX (c) != Sword
      && NILP (current_buffer->read_only)
      && point > BEGV && SYNTAX (FETCH_CHAR (point - 1)) == Sword)
    {
      int modiff = MODIFF;
      Fexpand_abbrev ();
      /* We can't trust the value of Fexpand_abbrev,
	 but if Fexpand_abbrev changed the buffer,
	 assume it expanded something.  */
      if (MODIFF != modiff)
	hairy = 1;
    }
  if ((c == ' ' || c == '\n')
      && !noautofill
      && !NILP (current_buffer->auto_fill_function)
      && current_column () > XFASTINT (current_buffer->fill_column))
    {
      if (c1 != '\n')
	insert (&c1, 1);
      call0 (current_buffer->auto_fill_function);
      if (c1 == '\n')
	insert (&c1, 1);
      hairy = 1;
    }
  else
    insert (&c1, 1);
  synt = SYNTAX (c);
  if ((synt == Sclose || synt == Smath)
      && !NILP (Vblink_paren_function) && INTERACTIVE)
    {
      call0 (Vblink_paren_function);
      hairy = 1;
    }
  return hairy;
}

/* module initialization */

syms_of_cmds ()
{
  Qkill_backward_chars = intern ("kill-backward-chars");
  staticpro (&Qkill_backward_chars);

  Qkill_forward_chars = intern ("kill-forward-chars");
  staticpro (&Qkill_forward_chars);

  Qoverwrite_mode_binary = intern ("overwrite-mode-binary");
  staticpro (&Qoverwrite_mode_binary);

  DEFVAR_LISP ("blink-paren-function", &Vblink_paren_function,
    "Function called, if non-nil, whenever a close parenthesis is inserted.\n\
More precisely, a char with closeparen syntax is self-inserted.");
  Vblink_paren_function = Qnil;

  defsubr (&Sforward_char);
  defsubr (&Sbackward_char);
  defsubr (&Sforward_line);
  defsubr (&Sbeginning_of_line);
  defsubr (&Send_of_line);

  defsubr (&Sdelete_char);
  defsubr (&Sdelete_backward_char);

  defsubr (&Sself_insert_command);
  defsubr (&Snewline);
}

keys_of_cmds ()
{
  int n;

  initial_define_key (global_map, Ctl('M'), "newline");
  initial_define_key (global_map, Ctl('I'), "self-insert-command");
  for (n = 040; n < 0177; n++)
    initial_define_key (global_map, n, "self-insert-command");
  for (n = 0240; n < 0377; n++)
    initial_define_key (global_map, n, "self-insert-command");

  initial_define_key (global_map, Ctl ('A'), "beginning-of-line");
  initial_define_key (global_map, Ctl ('B'), "backward-char");
  initial_define_key (global_map, Ctl ('D'), "delete-char");
  initial_define_key (global_map, Ctl ('E'), "end-of-line");
  initial_define_key (global_map, Ctl ('F'), "forward-char");
  initial_define_key (global_map, 0177, "delete-backward-char");
}