view make-dist @ 983:eb19dfaec9c4

* window.c (window_loop): This used to keep track of the first window processed and wait until we came back around to it. Sadly, this doesn't work if that window gets deleted. So instead, use Fprevious_window to find the last window to process, and loop until we've done that one. * window.c [not MULTI_FRAME] (init_window_once): Don't forget to set the `mini_p' flag on the new minibuffer window to t. * window.c (Fwindow_at): Don't check the type of the frame argument. * window.c [not MULTI_FRAME] (window_loop): Set frame to zero, instead of trying to decode it. * window.c (init_window_once): Initialize minibuf_window before FRAME_ROOT_WINDOW, so the latter actually points to something.

#!/bin/sh
#
# make-dist: create an Emacs distribution tar file from the current
# source tree.	This basically creates a duplicate directory
# structure, and then hard links into it only those files that should
# be distributed.  This means that if you add a file with an odd name,
# you should make sure that this script will include it.

progname="$0"

# Exit if a command fails.
set -e

# Print out each line we read, for debugging's sake.
# set -v

clean_up=yes
make_tar=yes

while [ $# -gt 0 ]; do
  case "$1" in
    "--no-clean_up" )
      clean_up=no
    ;;
    "--no-tar" )
      make_tar=no
      clean_up=no
    ;;
    * )
      echo "${progname}: Unrecognized argument: $1" >&2
      exit 1
    ;;
  esac
  shift
done

# Make sure we're running in the right place.
if [ ! -d src -o ! -f src/lisp.h -o ! -d lisp -o ! -f lisp/version.el ]; then
  echo "${progname}: must run in the top directory of the Emacs" >&2
  echo "distribution tree.  Cd to that directory and try again." >&2
  exit 1
fi

# Find out which version of Emacs this is.
version=`grep 'defconst[	 ]*emacs-version' lisp/version.el \
	 | sed -e 's/^.*"\([0-9]+\.[0-9]+\)\..*$/\1/'`
if [ ! "${version}" ]; then
  echo "${progname}: can't find current emacs version in ./lisp/version.el." >&2
  exit 1
fi

# Make sure the subdirectory is available.
tempparent="make-dist.$$"
if [ -d ${tempparent} ]; then
  echo "${progname}: staging directory ${tempparent} already exists.
Perhaps a previous invocation of ${progname} failed to clean up
after itself.  Check that directories whose names are of the form
make-dist.NNNNN don't contain any important information, remove them,
and try again." >&2
  exit 1
fi

echo "Creating staging directory: ${tempparent}"
mkdir ${tempparent}
emacsname="emacs-${version}"
tempdir="${tempparent}/${emacsname}"

echo "Creating top directory: ${tempdir}"
mkdir ${tempdir}

# We copy in the top-level files before creating the subdirectories in
# hopes that this will make the top-level files appear first in the
# tar file; this means that people can start reading the INSTALL and
# README while the rest of the tar file is still unpacking.  Whoopee.
echo "Copying top-level files." 
ln GETTING.GNU.SOFTWARE INSTALL PROBLEMS README ${tempdir}
ln ChangeLog Makefile.in build-install.in configure make-dist ${tempdir}

echo "Creating subdirectories."
for subdir in lisp lisp/term src src/m src/s lib-src oldXMenu \
	      etc lock local-lisp arch-lib cpp info man shortnames; do
  mkdir ${tempdir}/${subdir}
done

echo "Copying lisp."
# Don't distribute =*.el files, site-init.el, or site-load.el.
(cd lisp
 ln [a-zA-Z]*.el ../${tempdir}/lisp
 ln [a-zA-Z]*.elc ../${tempdir}/lisp
 ln [a-zA-Z]*.defns ../${tempdir}/lisp
 ln ChangeLog README ../${tempdir}/lisp
 cd ../${tempdir}/lisp
 rm -f site-init site-init.el site-init.elc
 rm -f site-load site-load.el site-load.elc)

echo "Copying lisp/term."
# Don't distribute =*.el files.
(cd lisp/term
 ln [a-zA-Z]*.el ../../${tempdir}/lisp/term
 ln [a-zA-Z]*.elc ../../${tempdir}/lisp/term
 ln README ../../${tempdir}/lisp/term)

echo "Copying src."
# Don't distribute =*.[ch] files, or the configured versions of
# config.h.in, paths.h.in, or Makefile.in.
(cd src
 ln [a-zA-Z]*.c ../${tempdir}/src
 ln [a-zA-Z]*.h ../${tempdir}/src
 ln [a-zA-Z]*.s ../${tempdir}/src
 ln README Makefile.in ymakefile ChangeLog config.h.in paths.h.in \
    ../${tempdir}/src
 ln .gdbinit .dbxinit ../${tempdir}/src
 ln *.com *.opt vms-pp.trans vmsbuild ../${tempdir}/src
 cd ../${tempdir}/src
 etags *.h *.c ../lisp/*.el)

echo "Copying src/m."
(cd src/m
 ln README *.h ../../${tempdir}/src/m)

echo "Copying src/s."
(cd src/s
 ln README *.h ../../${tempdir}/src/s)

echo "Copying lib-src."
(cd lib-src
 ln [a-zA-Z]*.c [a-zA-Z]*.h [a-zA-Z]*.y [a-zA-Z]*.lex ../${tempdir}/lib-src
 ln ChangeLog Makefile.in README testfile ../${tempdir}/lib-src)

echo "Copying oldXMenu."
(cd oldXMenu
 ln *.c *.h ../${tempdir}/oldXMenu
 ln README Makefile Imakefile ChangeLog ../${tempdir}/oldXMenu)

echo "Copying etc."
# Don't distribute DOC files, backups, autosaves, or tex litter.
(cd etc
 ln [0-9a-zA-Z]* ../${tempdir}/etc
 cd ../${tempdir}/etc
 # Avoid an error when expanding the wildcards later.
 for dummy in DOC-dummy dummy~ \#dummy\# dummy.dvi dummy.log; do
   ln MACHINES ${dummy}
 done
 rm -f DOC* *~ \#*\# *.dvi *.log core)

# For now, we comment these out, since I'm not changing them any.
#!! echo "Copying cpp."
#!! (cd cpp
#!!  ln cccp.c cexp.y Makefile README ../${tempdir}/cpp)
#!! 
#!! echo "Copying info."
#!! # Don't distribute backups or autosaves.
#!! (cd info
#!!  ln [a-zA-Z]* ../${tempdir}/info
#!!  cd ../${tempdir}/info
#!!  # Avoid an error when expanding the wildcards later.
#!!  ln emacs dummy~ ; ln emacs \#dummy\#
#!!  rm -f *~ \#*\# core)
#!! 
#!! echo "Copying man."
#!! (cd man
#!!  ln *.tex *.texinfo *.texi *.aux *.cps *.fns *.kys *.vrs ../${tempdir}/man
#!!  ln *.c ../${tempdir}/man
#!!  ln ChangeLog Makefile README split-man ../${tempdir}/man)

echo "Copying shortnames."
(cd shortnames
 ln *.c ../${tempdir}/shortnames
 ln Makefile reserved special ../${tempdir}/shortnames)

echo "Making sure copying notices are symlinks."
if [ -f ${tempdir}/etc/COPYING ]; then
  rm ${tempdir}/etc/COPYING
  ln etc/COPYING ${tempdir}/etc/COPYING
fi
for subdir in lisp src lib-src info shortnames; do
  if [ -f ${tempdir}/${subdir}/COPYING ]; then
    rm ${tempdir}/${subdir}/COPYING
  fi
  ln -s ../etc/COPYING ${tempdir}/${subdir}
done

if [ "${make_tar}" = yes ]; then
  echo "Creating tar file."
  (cd ${tempparent}; tar cvf - ${emacsname}) | compress > ${emacsname}.tar.Z
fi

if [ "${clean_up}" = yes ]; then
  echo "Cleaning up the staging directory."
  rm -rf ${tempparent}
fi