Mercurial > emacs
view make-dist @ 111833:f0dfec5bd26b
* src/lread.c (read1): Allow newstyle unquote outside of backquote.
Disallow old-style backquotes inside new-style backquotes.
Don't count unquotes to figure out when we're "syntactically inside
but semantically outside of a backquote" any more.
Extend the restriction no-unescaped-commas-and-backquotes-in-symbols
to all contexts.
author | Stefan Monnier <monnier@iro.umontreal.ca> |
---|---|
date | Mon, 06 Dec 2010 11:37:26 -0500 |
parents | ced73eea562f |
children | 2e087a5593f8 |
line wrap: on
line source
#!/bin/sh ### make-dist: create an Emacs distribution tar file from current srcdir ## Copyright (C) 1995, 1997, 1998, 2000, 2001, 2002, 2003, 2004, 2005, ## 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. ## This file is part of GNU Emacs. ## GNU Emacs is free software: you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation, either version 3 of the License, or ## (at your option) any later version. ## GNU Emacs is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. ### Commentary: ## This basically creates a duplicate directory structure, and then ## hard links into it only those files that should be distributed. ## This means that if you add a file with an odd name, you should make ## sure that this script will include it. ### Code: progname="$0" ### Exit if a command fails. #set -e ### Print out each line we read, for debugging's sake. #set -v LANGUAGE=C LC_ALL=C LC_MESSAGES= LANG= export LANGUAGE LC_ALL LC_MESSAGES LANG ## Don't restrict access to any files. umask 0 update=yes check=yes clean_up=no make_tar=no default_gzip=gzip newer="" while [ $# -gt 0 ]; do case "$1" in ## This option tells make-dist to delete the staging directory ## when done. It is useless to use this unless you make a tar file. "--clean-up" ) clean_up=yes ;; ## This option tells make-dist to make a tar file. "--tar" ) make_tar=yes ;; ## This option tells make-dist not to recompile or do analogous things. "--no-update" ) update=no ;; ## This option says don't check for bad file names, etc. "--no-check" ) check=no ;; ## This option tells make-dist to make the distribution normally, then ## remove all files older than the given timestamp file. This is useful ## for creating incremental or patch distributions. "--newer") newer="$2" new_extension=".new" shift ;; ## This option tells make-dist to use `bzip2' instead of gzip. "--bzip2") default_gzip="bzip2" ;; ## Same with lzma. "--lzma") default_gzip="lzma" ;; "--snapshot") clean_up=yes make_tar=yes update=no check=no ;; "--help") echo "Usage: ${progname} [options]" echo "" echo " --bzip2 use bzip2 instead of gzip" echo " --clean-up delete staging directories when done" echo " --lzma use lzma instead of gzip" echo " --newer=TIME don't include files older than TIME" echo " --no-check don't check for bad file names etc." echo " --no-update don't recompile or do analogous things" echo " --snapshot same as --clean-up --no-update --tar --no-check" echo " --tar make a tar file" echo "" exit 0 ;; * ) echo "${progname}: Unrecognized argument: $1" >&2 exit 1 ;; esac shift done ### Make sure we're running in the right place. if [ ! -d src -o ! -f src/lisp.h -o ! -d lisp -o ! -f lisp/subr.el ]; then echo "${progname}: Can't find \`src/lisp.h' and \`lisp/subr.el'." >&2 echo "${progname} must be run in the top directory of the Emacs" >&2 echo "distribution tree. cd to that directory and try again." >&2 exit 1 fi ### Find where to run Emacs. ### (Accept only absolute file names.) if [ $update = yes ]; then if [ -f src/emacs ]; then EMACS=`pwd`/src/emacs else case $EMACS in /*) ;; *) if [ ! -f "$EMACS" ]; then echo "$0: You must set the EMACS environment variable " \ "to an absolute file name." 2>&1 exit 1 fi;; esac fi fi ### Find out which version of Emacs this is. version=`sed -n '/char emacs_version/ s/^[^"]*"\([^"]*\)".*$/\1/p' src/emacs.c` if [ ! "${version}" ]; then echo "${progname}: can't find current Emacs version in \`./src/emacs.c'" >&2 exit 1 fi echo Version number is $version if [ $update = yes ]; then if ! grep -q "@set EMACSVER *${version}" doc/emacs/emacsver.texi || \ ! grep -q "tree holds version *${version}" README; then echo "WARNING: README and/or emacsver.texi have the wrong version number" echo "Consider running M-x set-version from admin/admin.el" sleep 5 fi fi ### Make sure we don't already have a directory emacs-${version}. emacsname="emacs-${version}${new_extension}" if [ -d ${emacsname} ] then echo Directory "${emacsname}" already exists >&2 exit 1 fi ### Make sure the subdirectory is available. tempparent="make-dist.tmp.$$" if [ -d ${tempparent} ]; then echo "${progname}: staging directory \`${tempparent}' already exists. Perhaps a previous invocation of \`${progname}' failed to clean up after itself. Check that directories whose names are of the form \`make-dist.tmp.NNNNN' don't contain any important information, remove them, and try again." >&2 exit 1 fi if [ $check = yes ]; then ls -1 lisp/[a-zA-Z]*.el lisp/[a-z]*/[a-zA-Z0-9]*.el \ lisp/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \ lisp/[a-z]*/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \ leim/[a-z]*/[a-z]*.el > /tmp/el ls -1 lisp/[a-zA-Z]*.elc lisp/[a-z]*/[a-zA-Z0-9]*.elc \ lisp/[a-z]*/[a-z]*/[a-zA-Z0-9]*.elc \ lisp/[a-z]*/[a-z]*/[a-z]*/[a-zA-Z0-9]*.elc \ leim/[a-z]*/[a-z]*.elc > /tmp/elc ## Check for .elc files with no corresponding .el file. sed 's/\.el$/.elc/' /tmp/el > /tmp/elelc bogosities="`comm -13 /tmp/elelc /tmp/elc`" if [ x"${bogosities}" != x"" ]; then echo "The following .elc files have no corresponding .el files:" echo "${bogosities}" fi ### Check for .el files with no corresponding .elc file. sed 's/\.elc$/.el/' /tmp/elc > /tmp/elcel losers="`comm -23 /tmp/el /tmp/elcel`" rm -f /tmp/el /tmp/elc /tmp/elcel /tmp/elelc bogosities= for file in $losers; do grep -q "no-byte-compile: t" $file && continue case $file in site-init.el | site-load.el | site-start.el | default.el) continue ;; esac bogosities="$file $bogosities" done if [ x"${bogosities}" != x"" ]; then echo "The following .el files have no corresponding .elc files:" echo "${bogosities}" fi fi if [ $update = yes ]; then ## Make sure configure is newer than configure.in. if [ "x`ls -t configure configure.in | sed q`" != "xconfigure" ]; then echo "\`./configure.in' is newer than \`./configure'" >&2 echo "Running autoconf" >&2 autoconf || { x=$?; echo Autoconf FAILED! >&2; exit $x; } fi ## Make sure src/stamp-h.in is newer than configure.in. if [ "x`ls -t src/stamp-h.in configure.in | sed q`" != "xsrc/stamp-h.in" ]; then echo "\`./configure.in' is newer than \`./src/stamp-h.in'" >&2 echo "Running autoheader" >&2 autoheader || { x=$?; echo Autoheader FAILED! >&2; exit $x; } rm -f src/stamp-h.in echo timestamp > src/stamp-h.in fi echo "Updating Info files" (cd doc/emacs; make info) (cd doc/misc; make info) (cd doc/lispref; make info) (cd doc/lispintro; make info) echo "Updating finder, custom and autoload data" (cd lisp; make updates EMACS="$EMACS") if test -f leim/leim-list.el; then echo "Updating leim-list.el" (cd leim; make leim-list.el EMACS="$EMACS") fi echo "Recompiling Lisp files" $EMACS -batch -f batch-byte-recompile-directory lisp leim fi # $update = yes echo "Creating staging directory: \`${tempparent}'" mkdir ${tempparent} tempdir="${tempparent}/${emacsname}" ### This trap ensures that the staging directory will be cleaned up even ### when the script is interrupted in mid-career. if [ "${clean_up}" = yes ]; then trap "echo 'Cleaning up the staging directory'; rm -rf ${tempparent}" EXIT fi echo "Creating top directory: \`${tempdir}'" mkdir ${tempdir} ### We copy in the top-level files before creating the subdirectories in ### hopes that this will make the top-level files appear first in the ### tar file; this means that people can start reading the INSTALL and ### README while the rest of the tar file is still unpacking. Whoopee. echo "Making links to top-level files" ln INSTALL README BUGS move-if-change ${tempdir} ln ChangeLog Makefile.in configure configure.in ${tempdir} ln config.bat make-dist update-subdirs vpath.sed .dir-locals.el ${tempdir} ln mkinstalldirs config.sub config.guess install-sh ${tempdir} echo "Creating subdirectories" for subdir in site-lisp \ leim leim/CXTERM-DIC leim/MISC-DIC \ leim/SKK-DIC leim/ja-dic leim/quail \ src src/m src/s src/bitmaps lib-src oldXMenu lwlib \ nt nt/inc nt/inc/sys nt/inc/arpa nt/inc/netinet nt/icons \ `find etc lisp -type d` \ doc doc/emacs doc/misc doc/man doc/lispref doc/lispintro \ info m4 msdos \ nextstep nextstep/Cocoa nextstep/Cocoa/Emacs.base \ nextstep/Cocoa/Emacs.base/Contents \ nextstep/Cocoa/Emacs.base/Contents/Resources \ nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj \ nextstep/Cocoa/Emacs.xcodeproj \ nextstep/GNUstep \ nextstep/GNUstep/Emacs.base \ nextstep/GNUstep/Emacs.base/Resources do ## site-lisp for in-place installs (?). [ "$subdir" = "site-lisp" ] || [ -d "$subdir" ] || \ echo "WARNING: $subdir not found, making anyway" echo " ${tempdir}/${subdir}" mkdir ${tempdir}/${subdir} done echo "Making links to \`lisp' and its subdirectories" files=`find lisp \( -name '*.el' -o -name '*.elc' -o -name 'ChangeLog*' \ -o -name 'README*' \)` ### Don't distribute site-init.el, site-load.el, or default.el. for file in lisp/Makefile.in lisp/makefile.w32-in $files; do case $file in */site-init*|*/site-load*|*/default*) continue ;; esac ln $file $tempdir/$file done echo "Making links to \`leim' and its subdirectories" (cd leim ln makefile.w32-in ../${tempdir}/leim ln ChangeLog README ../${tempdir}/leim ln CXTERM-DIC/README CXTERM-DIC/*.tit ../${tempdir}/leim/CXTERM-DIC ln SKK-DIC/README SKK-DIC/SKK-JISYO.L ../${tempdir}/leim/SKK-DIC ln MISC-DIC/README MISC-DIC/*.* ../${tempdir}/leim/MISC-DIC ln ja-dic/*.el ja-dic/*.elc ../${tempdir}/leim/ja-dic ln Makefile.in ../${tempdir}/leim/Makefile.in ln leim-ext.el ../${tempdir}/leim/leim-ext.el ## Lisp files that start with a capital (also 4Corner.el) are ## generated from TIT dictionaries so we don't distribute them. ln quail/[a-z]*.el quail/[a-z]*.elc ../${tempdir}/leim/quail rm -f ../${tempdir}/leim/quail/quick-b5.* rm -f ../${tempdir}/leim/quail/quick-cns.* rm -f ../${tempdir}/leim/quail/tsang-b5.* rm -f ../${tempdir}/leim/quail/tsang-cns.*) echo "Making links to \`src'" ### Don't distribute the configured versions of ### config.in, paths.in, buildobj.h, or Makefile.in. (cd src echo " (It is ok if ln fails in some cases.)" ln [a-zA-Z]*.[chm] ../${tempdir}/src ln [a-zA-Z]*.in ../${tempdir}/src ln [a-zA-Z]*.mk ../${tempdir}/src ln README ChangeLog ChangeLog.*[0-9] ../${tempdir}/src ln makefile.w32-in ../${tempdir}/src ln .gdbinit .dbxinit ../${tempdir}/src cd ../${tempdir}/src rm -f config.h epaths.h Makefile buildobj.h) echo "Making links to \`src/bitmaps'" (cd src/bitmaps ln README *.xbm ../../${tempdir}/src/bitmaps) echo "Making links to \`src/m'" (cd src/m ln README [a-zA-Z0-9]*.h ../../${tempdir}/src/m) echo "Making links to \`src/s'" (cd src/s ln README [a-zA-Z0-9]*.h ../../${tempdir}/src/s) echo "Making links to \`lib-src'" (cd lib-src ln [a-zA-Z]*.[ch] ../${tempdir}/lib-src ln ChangeLog Makefile.in README testfile vcdiff ../${tempdir}/lib-src ln grep-changelog rcs2log rcs-checkin ../${tempdir}/lib-src ln makefile.w32-in ../${tempdir}/lib-src cd ../${tempdir}/lib-src rm -f getopt.h) echo "Making links to \`m4'" (cd m4 ln *.m4 ../${tempdir}/m4) ## Exclude README.W32 because it is specific to pre-built binaries(?). echo "Making links to \`nt'" (cd nt ln emacs.manifest emacs.rc emacsclient.rc config.nt ../${tempdir}/nt ln emacs-src.tags nmake.defs gmake.defs subdirs.el ../${tempdir}/nt ln [a-z]*.bat [a-z]*.[ch] ../${tempdir}/nt ln ChangeLog INSTALL README makefile.w32-in ../${tempdir}/nt) echo "Making links to \`nt/inc' and its subdirectories" for f in `find nt/inc -type f -name '[a-z]*.h'`; do ln $f $tempdir/$f done echo "Making links to \`nt/icons'" (cd nt/icons ln README [a-z]*.ico ../../${tempdir}/nt/icons ln [a-z]*.cur ../../${tempdir}/nt/icons) echo "Making links to \`msdos'" (cd msdos ln ChangeLog INSTALL README emacs.ico emacs.pif ../${tempdir}/msdos ln is_exec.c sigaction.c mainmake.v2 sed*.inp ../${tempdir}/msdos) echo "Making links to \`nextstep'" (cd nextstep ln ChangeLog README INSTALL ../${tempdir}/nextstep) echo "Making links to \`nextstep/Cocoa/Emacs.base/Contents'" (cd nextstep/Cocoa/Emacs.base/Contents ln Info.plist PkgInfo ../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents) echo "Making links to \`nextstep/Cocoa/Emacs.base/Contents/Resources'" (cd nextstep/Cocoa/Emacs.base/Contents/Resources ln Credits.html *.icns ../../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents/Resources) echo "Making links to \`nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj'" (cd nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj ln InfoPlist.strings ../../../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj) echo "Making links to \`nextstep/Cocoa/Emacs.xcodeproj'" (cd nextstep/Cocoa/Emacs.xcodeproj ln project.pbxproj ../../../${tempdir}/nextstep/Cocoa/Emacs.xcodeproj) echo "Making links to \`nextstep/GNUstep/Emacs.base/Resources'" (cd nextstep/GNUstep/Emacs.base/Resources ln Emacs.desktop Info-gnustep.plist README emacs.tiff ../../../../${tempdir}/nextstep/GNUstep/Emacs.base/Resources ) echo "Making links to \`oldXMenu'" (cd oldXMenu ln *.[ch] *.in ../${tempdir}/oldXMenu ln README ChangeLog ../${tempdir}/oldXMenu) echo "Making links to \`lwlib'" (cd lwlib ln *.[ch] *.in ../${tempdir}/lwlib ln README ChangeLog ../${tempdir}/lwlib) echo "Making links to \`etc' and its subdirectories" for f in `find etc -type f`; do case $f in etc/DOC*) continue ;; esac ln $f $tempdir/$f done echo "Making links to \`info'" ln `find info -type f -print` ${tempdir}/info echo "Making links to \`doc/emacs'" (cd doc/emacs ln *.texi *.in makefile.w32-in ChangeLog* ../../${tempdir}/doc/emacs) echo "Making links to \`doc/misc'" (cd doc/misc ln *.texi *.tex *.in makefile.w32-in gnus-news.el ChangeLog* ../../${tempdir}/doc/misc) echo "Making links to \`doc/lispref'" (cd doc/lispref ln *.texi *.in makefile.w32-in README ChangeLog* ../../${tempdir}/doc/lispref ln *.txt *.el spellfile tindex.pl ../../${tempdir}/doc/lispref ln two-volume.make ../../${tempdir}/doc/lispref) echo "Making links to \`doc/lispintro'" (cd doc/lispintro ln *.texi *.in makefile.w32-in *.eps *.pdf ../../${tempdir}/doc/lispintro ln README ChangeLog* ../../${tempdir}/doc/lispintro cd ../../${tempdir}/doc/lispintro) echo "Making links to \`doc/man'" (cd doc/man ln ChangeLog* *.1 ../../${tempdir}/doc/man cd ../../${tempdir}/doc/man) ### It would be nice if they could all be symlinks to top-level copy, but ### you're not supposed to have any symlinks in distribution tar files. echo "Making sure copying notices are all copies of \`COPYING'" for subdir in . etc info leim lib-src lisp lwlib msdos nt src; do rm -f ${tempdir}/${subdir}/COPYING cp COPYING ${tempdir}/${subdir} done if [ "${newer}" ]; then echo "Removing files older than $newer" ## We remove .elc files unconditionally, on the theory that anyone picking ## up an incremental distribution already has a running Emacs to byte-compile ## them with. find ${tempparent} \( -name '*.elc' -o ! -newer ${newer} \) -exec rm -f {} \; fi ## Don't distribute backups, autosaves, etc. echo "Removing unwanted files" find ${tempparent} \( -name '*~' -o -name '#*#' -o -name '.*ignore' -o -name '=*' -o -name 'TAGS' \) -exec rm -f {} \; if [ "${make_tar}" = yes ]; then echo "Looking for $default_gzip" found=0 temppath=`echo $PATH | sed -e 's/^:/.:/' -e 's/::/:.:/g' -e 's/:$/:./' \ -e 's/:/ /g'` for dir in ${temppath}; do [ -x ${dir}/$default_gzip ] || continue found=1; break done if [ "$found" = "0" ]; then echo "WARNING: \`$default_gzip' not found, will not compress" >&2 default_gzip=cat fi case "${default_gzip}" in bzip2) gzip_extension=.bz2 ;; lzma) gzip_extension=.lzma ;; gzip) gzip_extension=.gz ; default_gzip="gzip --best";; *) gzip_extension= ;; esac echo "Creating tar file" (cd ${tempparent} ; tar cvf - ${emacsname} ) \ | ${default_gzip} \ > ${emacsname}.tar${gzip_extension} fi if [ "${clean_up}" != yes ]; then (cd ${tempparent}; mv ${emacsname} ..) rm -rf ${tempparent} fi ### make-dist ends here