Mercurial > emacs

view leim/makefile.w32-in @ 106395:f2b36fb84bf7

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Enhance `c-parse-state' to run efficiently in "brace desserts". * progmodes/cc-mode.el (c-basic-common-init): Call c-state-cache-init. (c-neutralize-syntax-in-and-mark-CPP): Renamed from c-extend-and-neutralize-syntax-in-CPP. Mark each CPP construct by placing `category' properties value 'c-cpp-delimiter at its boundaries. * progmodes/cc-langs.el (c-before-font-lock-function): c-extend-and-neutralize-syntax-in-CPP has been renamed c-neutralize-syntax-in-and-mark-CPP. * progmodes/cc-fonts.el (c-cpp-matchers): Mark template brackets with `category' properties now, not `syntax-table' ones. * progmodes/cc-engine.el (c-syntactic-end-of-macro): A new enhanced (but slower) version of c-end-of-macro that won't land inside a literal or on another awkward character. (c-state-cache-too-far, c-state-cache-start) (c-state-nonlit-pos-interval, c-state-nonlit-pos-cache) (c-state-nonlit-pos-cache-limit, c-state-point-min) (c-state-point-min-lit-type, c-state-point-min-lit-start) (c-state-min-scan-pos, c-state-brace-pair-desert) (c-state-old-cpp-beg, c-state-old-cpp-end): New constants and buffer local variables. (c-state-literal-at, c-state-lit-beg) (c-state-cache-non-literal-place, c-state-get-min-scan-pos) (c-state-mark-point-min-literal, c-state-cache-top-lparen) (c-state-cache-top-paren, c-state-cache-after-top-paren) (c-get-cache-scan-pos, c-get-fallback-scan-pos) (c-state-balance-parens-backwards, c-parse-state-get-strategy) (c-renarrow-state-cache) (c-append-lower-brace-pair-to-state-cache) (c-state-push-any-brace-pair, c-append-to-state-cache) (c-remove-stale-state-cache) (c-remove-stale-state-cache-backwards, c-state-cache-init) (c-invalidate-state-cache-1, c-parse-state-1) (c-invalidate-state-cache): New defuns/defmacros/defsubsts. (c-parse-state): Enhanced and refactored. (c-debug-parse-state): Amended to deal with all the new variables. * progmodes/cc-defs.el (c-<-as-paren-syntax, c-mark-<-as-paren) (c->-as-paren-syntax, c-mark->-as-paren, c-unmark-<->-as-paren): modify to use category text properties rather than syntax-table ones. (c-suppress-<->-as-parens, c-restore-<->-as-parens): new defsubsts to switch off/on the syntactic paren property of C++ template delimiters using the category property. (c-with-<->-as-parens-suppressed): Macro to invoke code with template delims suppressed. (c-cpp-delimiter, c-set-cpp-delimiters, c-clear-cpp-delimiters): New constant/macros which apply category properties to the start and end of preprocessor constructs. (c-comment-out-cpps, c-uncomment-out-cpps): defsubsts which "comment out" the syntactic value of characters in preprocessor constructs. (c-with-cpps-commented-out) (c-with-all-but-one-cpps-commented-out): Macros to invoke code with characters in all or all but one preprocessor constructs "commented out".
author Alan Mackenzie <acm@muc.de>
date Thu, 03 Dec 2009 16:02:10 +0000
parents 0d2e4142fb60
children 1d1d5d9bd884
line wrap: on
line source

# -*- Makefile -*- for leim subdirectory in GNU Emacs on the Microsoft W32 API.
# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
#   Free Software Foundation, Inc.
# Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
#   2006, 2007
#   National Institute of Advanced Industrial Science and Technology (AIST)
#   Registration Number H14PRO021

# This file is part of GNU Emacs.

# GNU Emacs is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.


srcdir=.

# Where to install LEIM files.
INSTALLDIR=$(INSTALL_DIR)/leim

# On IBM RS6000, double-dot gets screwed up.
dot = .

# Which Emacs to use to convert TIT files to Emacs Lisp files,
# byte-compile Emacs Lisp files, and generate the file leim-list.el.
BUILT_EMACS = $(THISDIR)/$(dot)$(dot)/src/$(BLD)/emacs.exe

buildlisppath=$(CURDIR)/$(dot)$(dot)/lisp

# How to run Emacs.
RUN_EMACS = "$(BUILT_EMACS)" -batch --no-init-file --no-site-file --multibyte

# Set EMACSLOADPATH correctly (already defined in environment).
EMACSLOADPATH=$(buildlisppath)

# Subdirectories to be made if $(srcdir) is different from the current
# directory.
SUBDIRS=quail

# Files generated from TIT dictionaries for Chinese GB character set.
TIT_GB=\
	quail/CCDOSPY.elc	\
	quail/Punct.elc		\
	quail/QJ.elc		\
	quail/SW.elc		\
	quail/TONEPY.elc

# Files generated from TIT dictionaries for Chinese BIG5 character set.
TIT_BIG5=\
	quail/4Corner.elc	\
	quail/ARRAY30.elc	\
	quail/ECDICT.elc	\
	quail/ETZY.elc		\
	quail/Punct-b5.elc	\
	quail/PY-b5.elc		\
	quail/QJ-b5.elc		\
	quail/ZOZY.elc

CHINESE_TIT=$(TIT_GB) $(TIT_BIG5)

NON_TIT_GB=$(srcdir)/quail/py-punct.elc

NON_TIT_BIG5=$(srcdir)/quail/pypunct-b5.elc

CHINESE_NON_TIT=$(NON_TIT_GB) $(NON_TIT_BIG5)

CHINESE_GB=$(TIT_GB) $(NON_TIT_GB)

CHINESE_BIG5=$(TIT_BIG5) $(NON_TIT_BIG5)

JAPANESE=$(srcdir)/quail/japanese.elc $(srcdir)/ja-dic/ja-dic.elc

KOREAN=	$(srcdir)/quail/hangul.elc	\
	$(srcdir)/quail/hanja.elc	\
	$(srcdir)/quail/hanja3.elc	\
	$(srcdir)/quail/hanja-jis.elc	\
	$(srcdir)/quail/symbol-ksc.elc

THAI=$(srcdir)/quail/thai.elc

VIETNAMESE=$(srcdir)/quail/viqr.elc $(srcdir)/quail/vntelex.elc

LAO=$(srcdir)/quail/lao.elc $(srcdir)/quail/lrt.elc

INDIAN=$(srcdir)/quail/indian.elc

TIBETAN=$(srcdir)/quail/tibetan.elc

LATIN=	$(srcdir)/quail/latin-pre.elc	\
	$(srcdir)/quail/latin-post.elc	\
	$(srcdir)/quail/latin-alt.elc	\
	$(srcdir)/quail/latin-ltx.elc	\
	$(srcdir)/quail/welsh.elc

UNICODE=$(srcdir)/quail/sgml-input.elc	\
	$(srcdir)/quail/rfc1345.elc	\
	$(srcdir)/quail/uni-input.elc

SLAVIC= \
	$(srcdir)/quail/czech.elc \
	$(srcdir)/quail/croatian.elc \
	$(srcdir)/quail/slovak.elc

GREEK=$(srcdir)/quail/greek.elc

RUSSIAN=$(srcdir)/quail/cyrillic.elc $(srcdir)/quail/cyril-jis.elc

MISC= \
	$(srcdir)/quail/arabic.elc \
	$(srcdir)/quail/ethiopic.elc \
	$(srcdir)/quail/ipa.elc \
	$(srcdir)/quail/hebrew.elc \
	$(srcdir)/quail/georgian.elc \
	$(srcdir)/quail/sisheng.elc

MISC_DIC=\
	quail/tsang-b5.elc	\
	quail/quick-b5.elc	\
	quail/tsang-cns.elc	\
	quail/quick-cns.elc	\
	quail/PY.elc		\
	quail/ZIRANMA.elc	\
	quail/CTLau.elc		\
	quail/CTLau-b5.elc

CHINESE=$(CHINESE_GB) $(CHINESE_BIG5)
EASTASIA=$(CHINESE) $(JAPANESE) $(KOREAN)
ASIA=$(EASTASIA) $(THAI) $(VIETNAMESE) $(LAO) $(INDIAN) $(TIBETAN)
EUROPEAN=$(LATIN) $(SLAVIC) $(GREEK) $(RUSSIAN)
WORLD=$(ASIA) $(EUROPEAN) $(MISC) $(MISC_DIC) $(UNICODE)

TIT=$(CHINESE_TIT)
NON_TIT=$(CHINESE_NON_TIT) $(JAPANESE) $(KOREAN) $(EUROPEAN) $(MISC)

.SUFFIXES: .elc .el

.el.elc:
	$(RUN_EMACS) -f batch-byte-compile $<

all: $(BUILT_EMACS) $(SUBDIRS) $(WORLD) leim-list.el

# To ensure that we can run Emacs.  This target is ignored (never
# being hit) if a user changes default value of EMACS.
$(dot)$(dot)/src/emacs:
	cd ../src; $(MAKE) $(MFLAGS) emacs

$(SUBDIRS):
	mkdir "$@"
	echo stamp>stamp-subdir

# The rules which generate $(TIT) and ${MISC_DIC) files create them all
# in one go.  So we need to prevent parallel execution for that target,
# otherwise Emacs complains about files being locked.  .NOTPARALLEL is
# for GNU Make, .NO_PARALLEL is for other Make's.
.NOTPARALLEL: $(TIT) $(MISC_DIC)

.NO_PARALLEL: $(TIT) $(MISC_DIC)

# Rule to generate quail/*.el from CXTERM-DIC/*.tit.
#
# WARNING: Do NOT split the part inside $(ARGQUOTE)s into multiple lines as
#          this can break with GNU Make 3.81 and later if sh.exe is used.
$(TIT):
	$(RUN_EMACS) -l $(buildlisppath)/international/titdic-cnv \
	    --eval $(ARGQUOTE)(batch-titdic-convert t)$(ARGQUOTE) \
	    -dir quail $(srcdir)/CXTERM-DIC
	$(RUN_EMACS)  -l $(buildlisppath)/international/quail \
	    -f batch-byte-compile $(TIT:.elc=.el)

# Rule to generate quail/*.el from MISC_DIC/*.tit.
$(MISC_DIC):
	$(RUN_EMACS) -l $(buildlisppath)/international/titdic-cnv \
	    -f batch-miscdic-convert -dir quail $(srcdir)/MISC-DIC
	$(RUN_EMACS)  -l $(buildlisppath)/international/quail \
	    -f batch-byte-compile $(MISC_DIC:.elc=.el)

#
# WARNING: Do NOT split the parts inside $(ARGQUOTE)s into multiple lines as
#          this can break with GNU Make 3.81 and later if sh.exe is used.
leim-list.el: $(SUBDIRS) $(WORLD) $(srcdir)/leim-ext.el
	- $(DEL) leim-list.el
	$(RUN_EMACS) -l $(buildlisppath)/international/quail \
	    --eval $(ARGQUOTE)(update-leim-list-file $(DQUOTE).$(DQUOTE))$(ARGQUOTE)
	$(RUN_EMACS) --eval $(ARGQUOTE)(w32-append-code-lines $(DQUOTE)$@$(DQUOTE) $(DQUOTE)$(srcdir)/leim-ext.el$(DQUOTE))$(ARGQUOTE)

install: all
	- mkdir "$(INSTALLDIR)"
	- $(DEL) same-dir.tst
	- $(DEL) $(INSTALL_DIR)/same-dir.tst
	echo SameDirTest > $(INSTALL_DIR)/same-dir.tst
	$(IFNOTSAMEDIR) $(CP) leim-list.el $(INSTALLDIR) $(ENDIF)
	$(IFNOTSAMEDIR) $(CP_DIR) quail $(INSTALLDIR) $(ENDIF)
	$(IFNOTSAMEDIR) $(CP_DIR) ja-dic $(INSTALLDIR) $(ENDIF)
	- $(DEL) $(INSTALL_DIR)/same-dir.tst

clean mostlyclean:
	- $(FOREACH) $(TIT) $(FORDO) $(DEL) $(FORVAR) $(ENDFOR)
	- $(FOREACH) $(MISC_DIC) $(FORDO) $(DEL) $(FORVAR) $(ENDFOR)
	- $(FOREACH) $(TIT:.elc=.el) $(FORDO) $(DEL) $(FORVAR) $(ENDFOR)
	- $(FOREACH) $(MISC_DIC:.elc=.el) $(FORDO) $(DEL) $(FORVAR) $(ENDFOR)
	- $(DEL) leim-list.el
	- $(DEL) leim-list.el~

distclean: clean
	- $(DEL) stamp-subdir
	- $(DEL) makefile

maintainer-clean: distclean
	- $(FOREACH) $(WORLD) $(FORDO) $(DEL) $(FORVAR) $(ENDFOR)

# We used to delete *~ here, but that might inadvertently remove
# precious files if it happens to match their short 8+3 aliases.
extraclean: maintainer-clean
	- $(FOREACH) *.el~ "#*" $(FORDO) $(DEL) $(FORVAR) $(ENDFOR)