Mercurial > emacs
view src/commands.h @ 106395:f2b36fb84bf7
Enhance `c-parse-state' to run efficiently in "brace desserts".
* progmodes/cc-mode.el (c-basic-common-init): Call
c-state-cache-init.
(c-neutralize-syntax-in-and-mark-CPP): Renamed from
c-extend-and-neutralize-syntax-in-CPP. Mark each CPP construct by
placing `category' properties value 'c-cpp-delimiter at its
boundaries.
* progmodes/cc-langs.el (c-before-font-lock-function):
c-extend-and-neutralize-syntax-in-CPP has been renamed
c-neutralize-syntax-in-and-mark-CPP.
* progmodes/cc-fonts.el (c-cpp-matchers): Mark template brackets
with `category' properties now, not `syntax-table' ones.
* progmodes/cc-engine.el (c-syntactic-end-of-macro): A new
enhanced (but slower) version of c-end-of-macro that won't land
inside a literal or on another awkward character.
(c-state-cache-too-far, c-state-cache-start)
(c-state-nonlit-pos-interval, c-state-nonlit-pos-cache)
(c-state-nonlit-pos-cache-limit, c-state-point-min)
(c-state-point-min-lit-type, c-state-point-min-lit-start)
(c-state-min-scan-pos, c-state-brace-pair-desert)
(c-state-old-cpp-beg, c-state-old-cpp-end): New constants and
buffer local variables.
(c-state-literal-at, c-state-lit-beg)
(c-state-cache-non-literal-place, c-state-get-min-scan-pos)
(c-state-mark-point-min-literal, c-state-cache-top-lparen)
(c-state-cache-top-paren, c-state-cache-after-top-paren)
(c-get-cache-scan-pos, c-get-fallback-scan-pos)
(c-state-balance-parens-backwards, c-parse-state-get-strategy)
(c-renarrow-state-cache)
(c-append-lower-brace-pair-to-state-cache)
(c-state-push-any-brace-pair, c-append-to-state-cache)
(c-remove-stale-state-cache)
(c-remove-stale-state-cache-backwards, c-state-cache-init)
(c-invalidate-state-cache-1, c-parse-state-1)
(c-invalidate-state-cache): New defuns/defmacros/defsubsts.
(c-parse-state): Enhanced and refactored.
(c-debug-parse-state): Amended to deal with all the new variables.
* progmodes/cc-defs.el (c-<-as-paren-syntax, c-mark-<-as-paren)
(c->-as-paren-syntax, c-mark->-as-paren, c-unmark-<->-as-paren):
modify to use category text properties rather than syntax-table
ones.
(c-suppress-<->-as-parens, c-restore-<->-as-parens): new defsubsts
to switch off/on the syntactic paren property of C++ template
delimiters using the category property.
(c-with-<->-as-parens-suppressed): Macro to invoke code with
template delims suppressed.
(c-cpp-delimiter, c-set-cpp-delimiters, c-clear-cpp-delimiters):
New constant/macros which apply category properties to the start
and end of preprocessor constructs.
(c-comment-out-cpps, c-uncomment-out-cpps): defsubsts which
"comment out" the syntactic value of characters in preprocessor
constructs.
(c-with-cpps-commented-out)
(c-with-all-but-one-cpps-commented-out): Macros to invoke code
with characters in all or all but one preprocessor constructs
"commented out".
author | Alan Mackenzie <acm@muc.de> |
---|---|
date | Thu, 03 Dec 2009 16:02:10 +0000 |
parents | 665b8b95b06f |
children | 1d1d5d9bd884 |
line wrap: on
line source
/* Definitions needed by most editing commands. Copyright (C) 1985, 1994, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */ #define Ctl(c) ((c)&037) /* Define the names of keymaps, just so people can refer to them in calls to initial_define_key. These should *not* be used after initialization; use-global-map doesn't affect these; it sets current_global_map instead. */ extern Lisp_Object global_map; extern Lisp_Object meta_map; extern Lisp_Object control_x_map; extern Lisp_Object Vminibuffer_local_map; extern Lisp_Object Vminibuffer_local_ns_map; /* keymap used for minibuffers when doing completion */ extern Lisp_Object Vminibuffer_local_completion_map; /* keymap used for minibuffers when doing completion in filenames*/ extern Lisp_Object Vminibuffer_local_filename_completion_map; /* keymap used for minibuffers when doing completion and require a match */ extern Lisp_Object Vminibuffer_local_must_match_map; /* keymap used for minibuffers when doing completion in filenames and require a match */ extern Lisp_Object Vminibuffer_local_filename_must_match_map; /* Last input event read as a command. */ extern Lisp_Object last_command_event; /* Last input event read as a command, not counting menus reached by the mouse. */ extern Lisp_Object last_nonmenu_event; /* List of command events to be re-read, or Qnil. */ extern Lisp_Object Vunread_command_events; /* Command char event to be re-read, or -1 if none. Setting this is obsolete, but some things should still check it. */ extern EMACS_INT unread_command_char; /* The command being executed by the command loop. Commands may set this, and the value set will be copied into current_kboard->Vlast_command instead of the actual command. */ extern Lisp_Object Vthis_command; /* If not Qnil, this is a switch-frame event which we decided to put off until the end of a key sequence. This should be read as the next command input, after any Vunread_command_events. read_key_sequence uses this to delay switch-frame events until the end of the key sequence; Fread_char uses it to put off switch-frame events until a non-ASCII event is acceptable as input. */ extern Lisp_Object unread_switch_frame; /* The value of point when the last command was started. */ extern int last_point_position; /* The buffer that was current when the last command was started. */ extern Lisp_Object last_point_position_buffer; /* The window that was selected when the last command was started. */ extern Lisp_Object last_point_position_window; /* Nonzero means ^G can quit instantly */ extern int immediate_quit; extern Lisp_Object Vexecuting_kbd_macro; /* Nonzero if input is coming from the keyboard */ #define INTERACTIVE (NILP (Vexecuting_kbd_macro) && !noninteractive) /* Set this nonzero to force reconsideration of mode line. */ extern int update_mode_lines; /* Nonzero means reading single-character input with prompt so put cursor on minibuffer after the prompt. */ extern int cursor_in_echo_area; /* arch-tag: 4f7ca0b7-6a56-4b20-8bf5-b67a99921d1d (do not change this comment) */