Mercurial > emacs
view src/doprnt.c @ 106395:f2b36fb84bf7
Enhance `c-parse-state' to run efficiently in "brace desserts".
* progmodes/cc-mode.el (c-basic-common-init): Call
c-state-cache-init.
(c-neutralize-syntax-in-and-mark-CPP): Renamed from
c-extend-and-neutralize-syntax-in-CPP. Mark each CPP construct by
placing `category' properties value 'c-cpp-delimiter at its
boundaries.
* progmodes/cc-langs.el (c-before-font-lock-function):
c-extend-and-neutralize-syntax-in-CPP has been renamed
c-neutralize-syntax-in-and-mark-CPP.
* progmodes/cc-fonts.el (c-cpp-matchers): Mark template brackets
with `category' properties now, not `syntax-table' ones.
* progmodes/cc-engine.el (c-syntactic-end-of-macro): A new
enhanced (but slower) version of c-end-of-macro that won't land
inside a literal or on another awkward character.
(c-state-cache-too-far, c-state-cache-start)
(c-state-nonlit-pos-interval, c-state-nonlit-pos-cache)
(c-state-nonlit-pos-cache-limit, c-state-point-min)
(c-state-point-min-lit-type, c-state-point-min-lit-start)
(c-state-min-scan-pos, c-state-brace-pair-desert)
(c-state-old-cpp-beg, c-state-old-cpp-end): New constants and
buffer local variables.
(c-state-literal-at, c-state-lit-beg)
(c-state-cache-non-literal-place, c-state-get-min-scan-pos)
(c-state-mark-point-min-literal, c-state-cache-top-lparen)
(c-state-cache-top-paren, c-state-cache-after-top-paren)
(c-get-cache-scan-pos, c-get-fallback-scan-pos)
(c-state-balance-parens-backwards, c-parse-state-get-strategy)
(c-renarrow-state-cache)
(c-append-lower-brace-pair-to-state-cache)
(c-state-push-any-brace-pair, c-append-to-state-cache)
(c-remove-stale-state-cache)
(c-remove-stale-state-cache-backwards, c-state-cache-init)
(c-invalidate-state-cache-1, c-parse-state-1)
(c-invalidate-state-cache): New defuns/defmacros/defsubsts.
(c-parse-state): Enhanced and refactored.
(c-debug-parse-state): Amended to deal with all the new variables.
* progmodes/cc-defs.el (c-<-as-paren-syntax, c-mark-<-as-paren)
(c->-as-paren-syntax, c-mark->-as-paren, c-unmark-<->-as-paren):
modify to use category text properties rather than syntax-table
ones.
(c-suppress-<->-as-parens, c-restore-<->-as-parens): new defsubsts
to switch off/on the syntactic paren property of C++ template
delimiters using the category property.
(c-with-<->-as-parens-suppressed): Macro to invoke code with
template delims suppressed.
(c-cpp-delimiter, c-set-cpp-delimiters, c-clear-cpp-delimiters):
New constant/macros which apply category properties to the start
and end of preprocessor constructs.
(c-comment-out-cpps, c-uncomment-out-cpps): defsubsts which
"comment out" the syntactic value of characters in preprocessor
constructs.
(c-with-cpps-commented-out)
(c-with-all-but-one-cpps-commented-out): Macros to invoke code
with characters in all or all but one preprocessor constructs
"commented out".
author | Alan Mackenzie <acm@muc.de> |
---|---|
date | Thu, 03 Dec 2009 16:02:10 +0000 |
parents | a08904175e1a |
children | 1d1d5d9bd884 |
line wrap: on
line source
/* Output like sprintf to a buffer of specified size. Also takes args differently: pass one pointer to an array of strings in addition to the format string which is separate. Copyright (C) 1985, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */ #include <config.h> #include <stdio.h> #include <ctype.h> #include <setjmp.h> #ifdef STDC_HEADERS #include <float.h> #endif #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #ifdef HAVE_STDLIB_H #include <stdlib.h> #endif #include "lisp.h" #ifndef DBL_MAX_10_EXP #define DBL_MAX_10_EXP 308 /* IEEE double */ #endif /* Since we use the macro CHAR_HEAD_P, we have to include this, but don't have to include others because CHAR_HEAD_P does not contains another macro. */ #include "character.h" static int doprnt1 (); /* Generate output from a format-spec FORMAT, terminated at position FORMAT_END. Output goes in BUFFER, which has room for BUFSIZE chars. If the output does not fit, truncate it to fit. Returns the number of bytes stored into BUFFER. ARGS points to the vector of arguments, and NARGS says how many. A double counts as two arguments. String arguments are passed as C strings. Integers are passed as C integers. */ int doprnt (buffer, bufsize, format, format_end, nargs, args) char *buffer; register int bufsize; char *format; char *format_end; int nargs; char **args; { int cnt = 0; /* Number of arg to gobble next */ register char *fmt = format; /* Pointer into format string */ register char *bufptr = buffer; /* Pointer into output buffer.. */ /* Use this for sprintf unless we need something really big. */ char tembuf[DBL_MAX_10_EXP + 100]; /* Size of sprintf_buffer. */ unsigned size_allocated = sizeof (tembuf); /* Buffer to use for sprintf. Either tembuf or same as BIG_BUFFER. */ char *sprintf_buffer = tembuf; /* Buffer we have got with malloc. */ char *big_buffer = 0; register int tem; unsigned char *string; char fixed_buffer[20]; /* Default buffer for small formatting. */ char *fmtcpy; int minlen; unsigned char charbuf[MAX_MULTIBYTE_LENGTH + 1]; /* Used for %c. */ if (format_end == 0) format_end = format + strlen (format); if ((format_end - format + 1) < sizeof (fixed_buffer)) fmtcpy = fixed_buffer; else fmtcpy = (char *) alloca (format_end - format + 1); bufsize--; /* Loop until end of format string or buffer full. */ while (fmt != format_end && bufsize > 0) { if (*fmt == '%') /* Check for a '%' character */ { unsigned size_bound = 0; int width; /* Columns occupied by STRING. */ fmt++; /* Copy this one %-spec into fmtcpy. */ string = (unsigned char *) fmtcpy; *string++ = '%'; while (1) { *string++ = *fmt; if ('0' <= *fmt && *fmt <= '9') { /* Get an idea of how much space we might need. This might be a field width or a precision; e.g. %1.1000f and %1000.1f both might need 1000+ bytes. Parse the width or precision, checking for overflow. */ unsigned n = *fmt - '0'; while ('0' <= fmt[1] && fmt[1] <= '9') { if (n * 10 + fmt[1] - '0' < n) error ("Format width or precision too large"); n = n * 10 + fmt[1] - '0'; *string++ = *++fmt; } if (size_bound < n) size_bound = n; } else if (*fmt == '-' || *fmt == ' ' || *fmt == '.' || *fmt == '+') ; else break; fmt++; } *string = 0; /* Make the size bound large enough to handle floating point formats with large numbers. */ if (size_bound + DBL_MAX_10_EXP + 50 < size_bound) error ("Format width or precision too large"); size_bound += DBL_MAX_10_EXP + 50; /* Make sure we have that much. */ if (size_bound > size_allocated) { if (big_buffer) big_buffer = (char *) xrealloc (big_buffer, size_bound); else big_buffer = (char *) xmalloc (size_bound); sprintf_buffer = big_buffer; size_allocated = size_bound; } minlen = 0; switch (*fmt++) { default: error ("Invalid format operation %%%c", fmt[-1]); /* case 'b': */ case 'd': case 'o': case 'x': if (cnt == nargs) error ("Not enough arguments for format string"); if (sizeof (int) == sizeof (EMACS_INT)) ; else if (sizeof (long) == sizeof (EMACS_INT)) /* Insert an `l' the right place. */ string[1] = string[0], string[0] = string[-1], string[-1] = 'l', string++; else abort (); sprintf (sprintf_buffer, fmtcpy, args[cnt++]); /* Now copy into final output, truncating as nec. */ string = (unsigned char *) sprintf_buffer; goto doit; case 'f': case 'e': case 'g': { union { double d; char *half[2]; } u; if (cnt + 1 == nargs) error ("Not enough arguments for format string"); u.half[0] = args[cnt++]; u.half[1] = args[cnt++]; sprintf (sprintf_buffer, fmtcpy, u.d); /* Now copy into final output, truncating as nec. */ string = (unsigned char *) sprintf_buffer; goto doit; } case 'S': string[-1] = 's'; case 's': if (cnt == nargs) error ("Not enough arguments for format string"); if (fmtcpy[1] != 's') minlen = atoi (&fmtcpy[1]); string = (unsigned char *) args[cnt++]; tem = strlen (string); width = strwidth (string, tem); goto doit1; /* Copy string into final output, truncating if no room. */ doit: /* Coming here means STRING contains ASCII only. */ width = tem = strlen (string); doit1: /* We have already calculated: TEM -- length of STRING, WIDTH -- columns occupied by STRING when displayed, and MINLEN -- minimum columns of the output. */ if (minlen > 0) { while (minlen > width && bufsize > 0) { *bufptr++ = ' '; bufsize--; minlen--; } minlen = 0; } if (tem > bufsize) { /* Truncate the string at character boundary. */ tem = bufsize; while (!CHAR_HEAD_P (string[tem - 1])) tem--; bcopy (string, bufptr, tem); /* We must calculate WIDTH again. */ width = strwidth (bufptr, tem); } else bcopy (string, bufptr, tem); bufptr += tem; bufsize -= tem; if (minlen < 0) { while (minlen < - width && bufsize > 0) { *bufptr++ = ' '; bufsize--; minlen++; } minlen = 0; } continue; case 'c': if (cnt == nargs) error ("Not enough arguments for format string"); tem = CHAR_STRING ((int) (EMACS_INT) args[cnt], charbuf); string = charbuf; cnt++; string[tem] = 0; width = strwidth (string, tem); if (fmtcpy[1] != 'c') minlen = atoi (&fmtcpy[1]); goto doit1; case '%': fmt--; /* Drop thru and this % will be treated as normal */ } } { /* Just some character; Copy it if the whole multi-byte form fit in the buffer. */ char *save_bufptr = bufptr; do { *bufptr++ = *fmt++; } while (--bufsize > 0 && !CHAR_HEAD_P (*fmt)); if (!CHAR_HEAD_P (*fmt)) { bufptr = save_bufptr; break; } } }; /* If we had to malloc something, free it. */ xfree (big_buffer); *bufptr = 0; /* Make sure our string end with a '\0' */ return bufptr - buffer; } /* arch-tag: aa0ab528-7c5f-4c73-894c-aa2526a1efb3 (do not change this comment) */