Mercurial > emacs
view lispref/files.texi @ 11252:f610f9d7e3ca
(get_doc_string): In (STRING . INTEGER), if INTEGER
is negative, negate it.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 07 Apr 1995 07:18:00 +0000 |
parents | f40f688148d1 |
children | 0b86aef0c387 |
line wrap: on
line source
@c -*-texinfo-*- @c This is part of the GNU Emacs Lisp Reference Manual. @c Copyright (C) 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc. @c See the file elisp.texi for copying conditions. @setfilename ../info/files @node Files, Backups and Auto-Saving, Documentation, Top @comment node-name, next, previous, up @chapter Files In Emacs, you can find, create, view, save, and otherwise work with files and file directories. This chapter describes most of the file-related functions of Emacs Lisp, but a few others are described in @ref{Buffers}, and those related to backups and auto-saving are described in @ref{Backups and Auto-Saving}. Many of the file functions take one or more arguments that are file names. A file name is actually a string. Most of these functions expand file name arguments using @code{expand-file-name}, so that @file{~} is handled correctly, as are relative file names (including @samp{../}). These functions don't recognize environment variable substitutions such as @samp{$HOME}. @xref{File Name Expansion}. @menu * Visiting Files:: Reading files into Emacs buffers for editing. * Saving Buffers:: Writing changed buffers back into files. * Reading from Files:: Reading files into buffers without visiting. * Writing to Files:: Writing new files from parts of buffers. * File Locks:: Locking and unlocking files, to prevent simultaneous editing by two people. * Information about Files:: Testing existence, accessibility, size of files. * Changing File Attributes:: Renaming files, changing protection, etc. * File Names:: Decomposing and expanding file names. * Contents of Directories:: Getting a list of the files in a directory. * Create/Delete Dirs:: Creating and Deleting Directories. * Magic File Names:: Defining "magic" special handling for certain file names. * Files and MS-DOS:: Distinguishing text and binary files on MS-DOS. @end menu @node Visiting Files @section Visiting Files @cindex finding files @cindex visiting files Visiting a file means reading a file into a buffer. Once this is done, we say that the buffer is @dfn{visiting} that file, and call the file ``the visited file'' of the buffer. A file and a buffer are two different things. A file is information recorded permanently in the computer (unless you delete it). A buffer, on the other hand, is information inside of Emacs that will vanish at the end of the editing session (or when you kill the buffer). Usually, a buffer contains information that you have copied from a file; then we say the buffer is visiting that file. The copy in the buffer is what you modify with editing commands. Such changes to the buffer do not change the file; therefore, to make the changes permanent, you must @dfn{save} the buffer, which means copying the altered buffer contents back into the file. In spite of the distinction between files and buffers, people often refer to a file when they mean a buffer and vice-versa. Indeed, we say, ``I am editing a file,'' rather than, ``I am editing a buffer that I will soon save as a file of the same name.'' Humans do not usually need to make the distinction explicit. When dealing with a computer program, however, it is good to keep the distinction in mind. @menu * Visiting Functions:: The usual interface functions for visiting. * Subroutines of Visiting:: Lower-level subroutines that they use. @end menu @node Visiting Functions @subsection Functions for Visiting Files This section describes the functions normally used to visit files. For historical reasons, these functions have names starting with @samp{find-} rather than @samp{visit-}. @xref{Buffer File Name}, for functions and variables that access the visited file name of a buffer or that find an existing buffer by its visited file name. @deffn Command find-file filename This command selects a buffer visiting the file @var{filename}, using an existing buffer if there is one, and otherwise creating a new buffer and reading the file into it. It also returns that buffer. The body of the @code{find-file} function is very simple and looks like this: @example (switch-to-buffer (find-file-noselect filename)) @end example @noindent (See @code{switch-to-buffer} in @ref{Displaying Buffers}.) When @code{find-file} is called interactively, it prompts for @var{filename} in the minibuffer. @end deffn @defun find-file-noselect filename This function is the guts of all the file-visiting functions. It finds or creates a buffer visiting the file @var{filename}, and returns it. It uses an existing buffer if there is one, and otherwise creates a new buffer and reads the file into it. You may make the buffer current or display it in a window if you wish, but this function does not do so. When @code{find-file-noselect} uses an existing buffer, it first verifies that the file has not changed since it was last visited or saved in that buffer. If the file has changed, then this function asks the user whether to reread the changed file. If the user says @samp{yes}, any changes previously made in the buffer are lost. If @code{find-file-noselect} needs to create a buffer, and there is no file named @var{filename}, it displays the message @samp{New file} in the echo area, and leaves the buffer empty. The @code{find-file-noselect} function calls @code{after-find-file} after reading the file (@pxref{Subroutines of Visiting}). That function sets the buffer major mode, parses local variables, warns the user if there exists an auto-save file more recent than the file just visited, and finishes by running the functions in @code{find-file-hooks}. The @code{find-file-noselect} function returns the buffer that is visiting the file @var{filename}. @example @group (find-file-noselect "/etc/fstab") @result{} #<buffer fstab> @end group @end example @end defun @deffn Command find-alternate-file filename This command selects a buffer visiting the file @var{filename}, then kills the buffer that was previously displayed in the selected window. It is useful if you have visited the wrong file by mistake, so that you can get rid of the buffer that you did not want to create, at the same time as you visit the file you intended. When this command is called interactively, it prompts for @var{filename}. @end deffn @deffn Command find-file-other-window filename This command selects a buffer visiting the file @var{filename}, but does so in a window other than the selected window. It may use another existing window or split a window; see @ref{Displaying Buffers}. When this command is called interactively, it prompts for @var{filename}. @end deffn @deffn Command find-file-read-only filename This command selects a buffer visiting the file @var{filename}, like @code{find-file}, but it marks the buffer as read-only. @xref{Read Only Buffers}, for related functions and variables. When this command is called interactively, it prompts for @var{filename}. @end deffn @deffn Command view-file filename This command visits @var{filename} in View mode, returning to the previous buffer when done. View mode is a mode that allows you to skim rapidly through the file but does not let you modify it. Entering View mode runs the normal hook @code{view-mode-hook}. @xref{Hooks}. When @code{view-file} is called interactively, it prompts for @var{filename}. @end deffn @defvar find-file-hooks The value of this variable is a list of functions to be called after a file is visited. The file's local-variables specification (if any) will have been processed before the hooks are run. The buffer visiting the file is current when the hook functions are run. This variable works just like a normal hook, but we think that renaming it would not be advisable. @end defvar @defvar find-file-not-found-hooks The value of this variable is a list of functions to be called when @code{find-file} or @code{find-file-noselect} is passed a nonexistent file name. @code{find-file-noselect} calls these functions as soon as it detects a nonexistent file. It calls them in the order of the list, until one of them returns non-@code{nil}. @code{buffer-file-name} is already set up. This is not a normal hook because the values of the functions are used and they may not all be called. @end defvar @node Subroutines of Visiting @comment node-name, next, previous, up @subsection Subroutines of Visiting The @code{find-file-noselect} function uses the @code{create-file-buffer} and @code{after-find-file} functions as subroutines. Sometimes it is useful to call them directly. @defun create-file-buffer filename This function creates a suitably named buffer for visiting @var{filename}, and returns it. It uses @var{filename} (sans directory) as the name if that name is free; otherwise, it appends a string such as @samp{<2>} to get an unused name. See also @ref{Creating Buffers}. @strong{Please note:} @code{create-file-buffer} does @emph{not} associate the new buffer with a file and does not select the buffer. @example @group (create-file-buffer "foo") @result{} #<buffer foo> @end group @group (create-file-buffer "foo") @result{} #<buffer foo<2>> @end group @group (create-file-buffer "foo") @result{} #<buffer foo<3>> @end group @end example This function is used by @code{find-file-noselect}. It uses @code{generate-new-buffer} (@pxref{Creating Buffers}). @end defun @defun after-find-file &optional error warn This function sets the buffer major mode, and parses local variables (@pxref{Auto Major Mode}). It is called by @code{find-file-noselect} and by the default revert function (@pxref{Reverting}). @cindex new file message @cindex file open error If reading the file got an error because the file does not exist, but its directory does exist, the caller should pass a non-@code{nil} value for @var{error}. In that case, @code{after-find-file} issues a warning: @samp{(New File)}. For more serious errors, the caller should usually not call @code{after-find-file}. If @var{warn} is non-@code{nil}, then this function issues a warning if an auto-save file exists and is more recent than the visited file. The last thing @code{after-find-file} does is call all the functions in @code{find-file-hooks}. @end defun @node Saving Buffers @section Saving Buffers When you edit a file in Emacs, you are actually working on a buffer that is visiting that file---that is, the contents of the file are copied into the buffer and the copy is what you edit. Changes to the buffer do not change the file until you @dfn{save} the buffer, which means copying the contents of the buffer into the file. @deffn Command save-buffer &optional backup-option This function saves the contents of the current buffer in its visited file if the buffer has been modified since it was last visited or saved. Otherwise it does nothing. @code{save-buffer} is responsible for making backup files. Normally, @var{backup-option} is @code{nil}, and @code{save-buffer} makes a backup file only if this is the first save since visiting the file. Other values for @var{backup-option} request the making of backup files in other circumstances: @itemize @bullet @item With an argument of 4 or 64, reflecting 1 or 3 @kbd{C-u}'s, the @code{save-buffer} function marks this version of the file to be backed up when the buffer is next saved. @item With an argument of 16 or 64, reflecting 2 or 3 @kbd{C-u}'s, the @code{save-buffer} function unconditionally backs up the previous version of the file before saving it. @end itemize @end deffn @deffn Command save-some-buffers &optional save-silently-p exiting This command saves some modified file-visiting buffers. Normally it asks the user about each buffer. But if @var{save-silently-p} is non-@code{nil}, it saves all the file-visiting buffers without querying the user. The optional @var{exiting} argument, if non-@code{nil}, requests this function to offer also to save certain other buffers that are not visiting files. These are buffers that have a non-@code{nil} local value of @code{buffer-offer-save}. (A user who says yes to saving one of these is asked to specify a file name to use.) The @code{save-buffers-kill-emacs} function passes a non-@code{nil} value for this argument. @end deffn @defvar buffer-offer-save When this variable is non-@code{nil} in a buffer, Emacs offers to save the buffer on exit even if the buffer is not visiting a file. The variable is automatically local in all buffers. Normally, Mail mode (used for editing outgoing mail) sets this to @code{t}. @end defvar @deffn Command write-file filename This function writes the current buffer into file @var{filename}, makes the buffer visit that file, and marks it not modified. Then it renames the buffer based on @var{filename}, appending a string like @samp{<2>} if necessary to make a unique buffer name. It does most of this work by calling @code{set-visited-file-name} and @code{save-buffer}. @end deffn @defvar write-file-hooks The value of this variable is a list of functions to be called before writing out a buffer to its visited file. If one of them returns non-@code{nil}, the file is considered already written and the rest of the functions are not called, nor is the usual code for writing the file executed. If a function in @code{write-file-hooks} returns non-@code{nil}, it is responsible for making a backup file (if that is appropriate). To do so, execute the following code: @example (or buffer-backed-up (backup-buffer)) @end example You might wish to save the file modes value returned by @code{backup-buffer} and use that to set the mode bits of the file that you write. This is what @code{save-buffer} normally does. Even though this is not a normal hook, you can use @code{add-hook} and @code{remove-hook} to manipulate the list. @xref{Hooks}. @end defvar @c Emacs 19 feature @defvar local-write-file-hooks This works just like @code{write-file-hooks}, but it is intended to be made local to particular buffers. It's not a good idea to make @code{write-file-hooks} local to a buffer---use this variable instead. The variable is marked as a permanent local, so that changing the major mode does not alter a buffer-local value. This is convenient for packages that read ``file'' contents in special ways, and set up hooks to save the data in a corresponding way. @end defvar @c Emacs 19 feature @defvar write-contents-hooks This works just like @code{write-file-hooks}, but it is intended for hooks that pertain to the contents of the file, as opposed to hooks that pertain to where the file came from. Such hooks are usually set up by major modes, as buffer-local bindings for this variable. Switching to a new major mode always resets this variable. @end defvar @c Emacs 19 feature @defvar after-save-hook This normal hook runs after a buffer has been saved in its visited file. @end defvar @defvar file-precious-flag If this variable is non-@code{nil}, then @code{save-buffer} protects against I/O errors while saving by writing the new file to a temporary name instead of the name it is supposed to have, and then renaming it to the intended name after it is clear there are no errors. This procedure prevents problems such as a lack of disk space from resulting in an invalid file. (This feature worked differently in older Emacs versions.) Some modes set this non-@code{nil} locally in particular buffers. @end defvar @defopt require-final-newline This variable determines whether files may be written out that do @emph{not} end with a newline. If the value of the variable is @code{t}, then @code{save-buffer} silently adds a newline at the end of the file whenever the buffer being saved does not already end in one. If the value of the variable is non-@code{nil}, but not @code{t}, then @code{save-buffer} asks the user whether to add a newline each time the case arises. If the value of the variable is @code{nil}, then @code{save-buffer} doesn't add newlines at all. @code{nil} is the default value, but a few major modes set it to @code{t} in particular buffers. @end defopt @node Reading from Files @comment node-name, next, previous, up @section Reading from Files You can copy a file from the disk and insert it into a buffer using the @code{insert-file-contents} function. Don't use the user-level command @code{insert-file} in a Lisp program, as that sets the mark. @defun insert-file-contents filename &optional visit beg end replace This function inserts the contents of file @var{filename} into the current buffer after point. It returns a list of the absolute file name and the length of the data inserted. An error is signaled if @var{filename} is not the name of a file that can be read. To set up saved text properties, @code{insert-file-contents} calls the functions in the list @code{after-insert-file-functions}. For more information, see @ref{Saving Properties}. If @var{visit} is non-@code{nil}, this function additionally marks the buffer as unmodified and sets up various fields in the buffer so that it is visiting the file @var{filename}: these include the buffer's visited file name and its last save file modtime. This feature is used by @code{find-file-noselect} and you probably should not use it yourself. If @var{beg} and @var{end} are non-@code{nil}, they should be integers specifying the portion of the file to insert. In this case, @var{visit} must be @code{nil}. For example, @example (insert-file-contents filename nil 0 500) @end example @noindent inserts the first 500 characters of a file. If the argument @var{replace} is non-@code{nil}, it means to replace the contents of the buffer (actually, just the accessible portion) with the contents of the file. This is better than simply deleting the buffer contents and inserting the whole file, because (1) it preserves some marker positions and (2) it puts less data in the undo list. @end defun If you want to pass a file name to another process so that another program can read the file, use the function @code{file-local-copy}; see @ref{Magic File Names}. @node Writing to Files @comment node-name, next, previous, up @section Writing to Files You can write the contents of a buffer, or part of a buffer, directly to a file on disk using the @code{append-to-file} and @code{write-region} functions. Don't use these functions to write to files that are being visited; that could cause confusion in the mechanisms for visiting. @deffn Command append-to-file start end filename This function appends the contents of the region delimited by @var{start} and @var{end} in the current buffer to the end of file @var{filename}. If that file does not exist, it is created. This function returns @code{nil}. An error is signaled if @var{filename} specifies a nonwritable file, or a nonexistent file in a directory where files cannot be created. @end deffn @deffn Command write-region start end filename &optional append visit This function writes the region delimited by @var{start} and @var{end} in the current buffer into the file specified by @var{filename}. @c Emacs 19 feature If @var{start} is a string, then @code{write-region} writes or appends that string, rather than text from the buffer. If @var{append} is non-@code{nil}, then the specified text is appended to the existing file contents (if any). If @var{visit} is @code{t}, then Emacs establishes an association between the buffer and the file: the buffer is then visiting that file. It also sets the last file modification time for the current buffer to @var{filename}'s modtime, and marks the buffer as not modified. This feature is used by @code{save-buffer}, but you probably should not use it yourself. @c Emacs 19 feature If @var{visit} is a string, it specifies the file name to visit. This way, you can write the data to one file (@var{filename}) while recording the buffer as visiting another file (@var{visit}). The argument @var{visit} is used in the echo area message and also for file locking; @var{visit} is stored in @code{buffer-file-name}. This feature is used to implement @code{file-precious-flag}; don't use it yourself unless you really know what you're doing. To output information about text properties, @code{write-region} calls the functions in the list @code{write-region-annotation-functions}. For more information, see @ref{Saving Properties}. Normally, @code{write-region} displays a message @samp{Wrote file @var{filename}} in the echo area. If @var{visit} is neither @code{t} nor @code{nil} nor a string, then this message is inhibited. This feature is useful for programs that use files for internal purposes, files that the user does not need to know about. @end deffn @node File Locks @section File Locks @cindex file locks When two users edit the same file at the same time, they are likely to interfere with each other. Emacs tries to prevent this situation from arising by recording a @dfn{file lock} when a file is being modified. Emacs can then detect the first attempt to modify a buffer visiting a file that is locked by another Emacs job, and ask the user what to do. File locks do not work properly when multiple machines can share file systems, such as with NFS. Perhaps a better file locking system will be implemented in the future. When file locks do not work, it is possible for two users to make changes simultaneously, but Emacs can still warn the user who saves second. Also, the detection of modification of a buffer visiting a file changed on disk catches some cases of simultaneous editing; see @ref{Modification Time}. @defun file-locked-p filename This function returns @code{nil} if the file @var{filename} is not locked by this Emacs process. It returns @code{t} if it is locked by this Emacs, and it returns the name of the user who has locked it if it is locked by someone else. @example @group (file-locked-p "foo") @result{} nil @end group @end example @end defun @defun lock-buffer &optional filename This function locks the file @var{filename}, if the current buffer is modified. The argument @var{filename} defaults to the current buffer's visited file. Nothing is done if the current buffer is not visiting a file, or is not modified. @end defun @defun unlock-buffer This function unlocks the file being visited in the current buffer, if the buffer is modified. If the buffer is not modified, then the file should not be locked, so this function does nothing. It also does nothing if the current buffer is not visiting a file. @end defun @defun ask-user-about-lock file other-user This function is called when the user tries to modify @var{file}, but it is locked by another user named @var{other-user}. The value it returns determines what happens next: @itemize @bullet @item A value of @code{t} says to grab the lock on the file. Then this user may edit the file and @var{other-user} loses the lock. @item A value of @code{nil} says to ignore the lock and let this user edit the file anyway. @item @kindex file-locked This function may instead signal a @code{file-locked} error, in which case the change that the user was about to make does not take place. The error message for this error looks like this: @example @error{} File is locked: @var{file} @var{other-user} @end example @noindent where @code{file} is the name of the file and @var{other-user} is the name of the user who has locked the file. @end itemize The default definition of this function asks the user to choose what to do. If you wish, you can replace the @code{ask-user-about-lock} function with your own version that decides in another way. The code for its usual definition is in @file{userlock.el}. @end defun @node Information about Files @section Information about Files The functions described in this section all operate on strings that designate file names. All the functions have names that begin with the word @samp{file}. These functions all return information about actual files or directories, so their arguments must all exist as actual files or directories unless otherwise noted. @menu * Testing Accessibility:: Is a given file readable? Writable? * Kinds of Files:: Is it a directory? A symbolic link? * Truenames:: Eliminating symbolic links from a file name. * File Attributes:: How large is it? Any other names? Etc. @end menu @node Testing Accessibility @comment node-name, next, previous, up @subsection Testing Accessibility @cindex accessibility of a file @cindex file accessibility These functions test for permission to access a file in specific ways. @defun file-exists-p filename This function returns @code{t} if a file named @var{filename} appears to exist. This does not mean you can necessarily read the file, only that you can find out its attributes. (On Unix, this is true if the file exists and you have execute permission on the containing directories, regardless of the protection of the file itself.) If the file does not exist, or if fascist access control policies prevent you from finding the attributes of the file, this function returns @code{nil}. @end defun @defun file-readable-p filename This function returns @code{t} if a file named @var{filename} exists and you can read it. It returns @code{nil} otherwise. @example @group (file-readable-p "files.texi") @result{} t @end group @group (file-exists-p "/usr/spool/mqueue") @result{} t @end group @group (file-readable-p "/usr/spool/mqueue") @result{} nil @end group @end example @end defun @c Emacs 19 feature @defun file-executable-p filename This function returns @code{t} if a file named @var{filename} exists and you can execute it. It returns @code{nil} otherwise. If the file is a directory, execute permission means you can check the existence and attributes of files inside the directory, and open those files if their modes permit. @end defun @defun file-writable-p filename This function returns @code{t} if the file @var{filename} can be written or created by you, and @code{nil} otherwise. A file is writable if the file exists and you can write it. It is creatable if it does not exist, but the specified directory does exist and you can write in that directory. In the third example below, @file{foo} is not writable because the parent directory does not exist, even though the user could create such a directory. @example @group (file-writable-p "~/foo") @result{} t @end group @group (file-writable-p "/foo") @result{} nil @end group @group (file-writable-p "~/no-such-dir/foo") @result{} nil @end group @end example @end defun @c Emacs 19 feature @defun file-accessible-directory-p dirname This function returns @code{t} if you have permission to open existing files in the directory whose name as a file is @var{dirname}; otherwise (or if there is no such directory), it returns @code{nil}. The value of @var{dirname} may be either a directory name or the file name of a directory. Example: after the following, @example (file-accessible-directory-p "/foo") @result{} nil @end example @noindent we can deduce that any attempt to read a file in @file{/foo/} will give an error. @end defun @defun file-newer-than-file-p filename1 filename2 @cindex file age @cindex file modification time This function returns @code{t} if the file @var{filename1} is newer than file @var{filename2}. If @var{filename1} does not exist, it returns @code{nil}. If @var{filename2} does not exist, it returns @code{t}. In the following example, assume that the file @file{aug-19} was written on the 19th, @file{aug-20} was written on the 20th, and the file @file{no-file} doesn't exist at all. @example @group (file-newer-than-file-p "aug-19" "aug-20") @result{} nil @end group @group (file-newer-than-file-p "aug-20" "aug-19") @result{} t @end group @group (file-newer-than-file-p "aug-19" "no-file") @result{} t @end group @group (file-newer-than-file-p "no-file" "aug-19") @result{} nil @end group @end example You can use @code{file-attributes} to get a file's last modification time as a list of two numbers. @xref{File Attributes}. @end defun @node Kinds of Files @comment node-name, next, previous, up @subsection Distinguishing Kinds of Files This section describes how to distinguish directories and symbolic links from ordinary files. @defun file-symlink-p filename @cindex file symbolic links If the file @var{filename} is a symbolic link, the @code{file-symlink-p} function returns the file name to which it is linked. This may be the name of a text file, a directory, or even another symbolic link, or it may be a nonexistent file name. If the file @var{filename} is not a symbolic link (or there is no such file), @code{file-symlink-p} returns @code{nil}. @example @group (file-symlink-p "foo") @result{} nil @end group @group (file-symlink-p "sym-link") @result{} "foo" @end group @group (file-symlink-p "sym-link2") @result{} "sym-link" @end group @group (file-symlink-p "/bin") @result{} "/pub/bin" @end group @end example @c !!! file-symlink-p: should show output of ls -l for comparison @end defun @defun file-directory-p filename This function returns @code{t} if @var{filename} is the name of an existing directory, @code{nil} otherwise. @example @group (file-directory-p "~rms") @result{} t @end group @group (file-directory-p "~rms/lewis/files.texi") @result{} nil @end group @group (file-directory-p "~rms/lewis/no-such-file") @result{} nil @end group @group (file-directory-p "$HOME") @result{} nil @end group @group (file-directory-p (substitute-in-file-name "$HOME")) @result{} t @end group @end example @end defun @node Truenames @subsection Truenames @cindex truename (of file) @c Emacs 19 features The @dfn{truename} of a file is the name that you get by following symbolic links until none remain, then expanding to get rid of @samp{.} and @samp{..} as components. Strictly speaking, a file need not have a unique truename; the number of distinct truenames a file has is equal to the number of hard links to the file. However, truenames are useful because they eliminate symbolic links as a cause of name variation. @defun file-truename filename The function @code{file-truename} returns the true name of the file @var{filename}. This is the name that you get by following symbolic links until none remain. The argument must be an absolute file name. @end defun @xref{Buffer File Name}, for related information. @node File Attributes @comment node-name, next, previous, up @subsection Other Information about Files This section describes the functions for getting detailed information about a file, other than its contents. This information includes the mode bits that control access permission, the owner and group numbers, the number of names, the inode number, the size, and the times of access and modification. @defun file-modes filename @cindex permission @cindex file attributes This function returns the mode bits of @var{filename}, as an integer. The mode bits are also called the file permissions, and they specify access control in the usual Unix fashion. If the low-order bit is 1, then the file is executable by all users, if the second-lowest-order bit is 1, then the file is writable by all users, etc. The highest value returnable is 4095 (7777 octal), meaning that everyone has read, write, and execute permission, that the @sc{suid} bit is set for both others and group, and that the sticky bit is set. @example @group (file-modes "~/junk/diffs") @result{} 492 ; @r{Decimal integer.} @end group @group (format "%o" 492) @result{} "754" ; @r{Convert to octal.} @end group @group (set-file-modes "~/junk/diffs" 438) @result{} nil @end group @group (format "%o" 438) @result{} "666" ; @r{Convert to octal.} @end group @group % ls -l diffs -rw-rw-rw- 1 lewis 0 3063 Oct 30 16:00 diffs @end group @end example @end defun @defun file-nlinks filename This functions returns the number of names (i.e., hard links) that file @var{filename} has. If the file does not exist, then this function returns @code{nil}. Note that symbolic links have no effect on this function, because they are not considered to be names of the files they link to. @example @group % ls -l foo* -rw-rw-rw- 2 rms 4 Aug 19 01:27 foo -rw-rw-rw- 2 rms 4 Aug 19 01:27 foo1 @end group @group (file-nlinks "foo") @result{} 2 @end group @group (file-nlinks "doesnt-exist") @result{} nil @end group @end example @end defun @defun file-attributes filename This function returns a list of attributes of file @var{filename}. If the specified file cannot be opened, it returns @code{nil}. The elements of the list, in order, are: @enumerate 0 @item @code{t} for a directory, a string for a symbolic link (the name linked to), or @code{nil} for a text file. @c Wordy so as to prevent an overfull hbox. --rjc 15mar92 @item The number of names the file has. Alternate names, also known as hard links, can be created by using the @code{add-name-to-file} function (@pxref{Changing File Attributes}). @item The file's @sc{uid}. @item The file's @sc{gid}. @item The time of last access, as a list of two integers. The first integer has the high-order 16 bits of time, the second has the low 16 bits. (This is similar to the value of @code{current-time}; see @ref{Time of Day}.) @item The time of last modification as a list of two integers (as above). @item The time of last status change as a list of two integers (as above). @item The size of the file in bytes. @item The file's modes, as a string of ten letters or dashes, as in @samp{ls -l}. @item @code{t} if the file's @sc{gid} would change if file were deleted and recreated; @code{nil} otherwise. @item The file's inode number. @item The file system number of the file system that the file is in. This element and the file's inode number together give enough information to distinguish any two files on the system---no two files can have the same values for both of these numbers. @end enumerate For example, here are the file attributes for @file{files.texi}: @example @group (file-attributes "files.texi") @result{} (nil 1 2235 75 (8489 20284) (8489 20284) (8489 20285) 14906 "-rw-rw-rw-" nil 129500 -32252) @end group @end example @noindent and here is how the result is interpreted: @table @code @item nil is neither a directory nor a symbolic link. @item 1 has only one name (the name @file{files.texi} in the current default directory). @item 2235 is owned by the user with @sc{uid} 2235. @item 75 is in the group with @sc{gid} 75. @item (8489 20284) was last accessed on Aug 19 00:09. Unfortunately, you cannot convert this number into a time string in Emacs. @item (8489 20284) was last modified on Aug 19 00:09. @item (8489 20285) last had its inode changed on Aug 19 00:09. @item 14906 is 14906 characters long. @item "-rw-rw-rw-" has a mode of read and write access for the owner, group, and world. @item nil would retain the same @sc{gid} if it were recreated. @item 129500 has an inode number of 129500. @item -32252 is on file system number -32252. @end table @end defun @node Changing File Attributes @section Changing File Names and Attributes @cindex renaming files @cindex copying files @cindex deleting files @cindex linking files @cindex setting modes of files The functions in this section rename, copy, delete, link, and set the modes of files. In the functions that have an argument @var{newname}, if a file by the name of @var{newname} already exists, the actions taken depend on the value of the argument @var{ok-if-already-exists}: @itemize @bullet @item Signal a @code{file-already-exists} error if @var{ok-if-already-exists} is @code{nil}. @item Request confirmation if @var{ok-if-already-exists} is a number. @item Replace the old file without confirmation if @var{ok-if-already-exists} is any other value. @end itemize @defun add-name-to-file oldname newname &optional ok-if-already-exists @cindex file with multiple names @cindex file hard link This function gives the file named @var{oldname} the additional name @var{newname}. This means that @var{newname} becomes a new ``hard link'' to @var{oldname}. In the first part of the following example, we list two files, @file{foo} and @file{foo3}. @example @group % ls -l fo* -rw-rw-rw- 1 rms 29 Aug 18 20:32 foo -rw-rw-rw- 1 rms 24 Aug 18 20:31 foo3 @end group @end example Then we evaluate the form @code{(add-name-to-file "~/lewis/foo" "~/lewis/foo2")}. Again we list the files. This shows two names, @file{foo} and @file{foo2}. @example @group (add-name-to-file "~/lewis/foo1" "~/lewis/foo2") @result{} nil @end group @group % ls -l fo* -rw-rw-rw- 2 rms 29 Aug 18 20:32 foo -rw-rw-rw- 2 rms 29 Aug 18 20:32 foo2 -rw-rw-rw- 1 rms 24 Aug 18 20:31 foo3 @end group @end example @c !!! Check whether this set of examples is consistent. --rjc 15mar92 Finally, we evaluate the following: @example (add-name-to-file "~/lewis/foo" "~/lewis/foo3" t) @end example @noindent and list the files again. Now there are three names for one file: @file{foo}, @file{foo2}, and @file{foo3}. The old contents of @file{foo3} are lost. @example @group (add-name-to-file "~/lewis/foo1" "~/lewis/foo3") @result{} nil @end group @group % ls -l fo* -rw-rw-rw- 3 rms 29 Aug 18 20:32 foo -rw-rw-rw- 3 rms 29 Aug 18 20:32 foo2 -rw-rw-rw- 3 rms 29 Aug 18 20:32 foo3 @end group @end example This function is meaningless on VMS, where multiple names for one file are not allowed. See also @code{file-nlinks} in @ref{File Attributes}. @end defun @deffn Command rename-file filename newname &optional ok-if-already-exists This command renames the file @var{filename} as @var{newname}. If @var{filename} has additional names aside from @var{filename}, it continues to have those names. In fact, adding the name @var{newname} with @code{add-name-to-file} and then deleting @var{filename} has the same effect as renaming, aside from momentary intermediate states. In an interactive call, this function prompts for @var{filename} and @var{newname} in the minibuffer; also, it requests confirmation if @var{newname} already exists. @end deffn @deffn Command copy-file oldname newname &optional ok-if-exists time This command copies the file @var{oldname} to @var{newname}. An error is signaled if @var{oldname} does not exist. If @var{time} is non-@code{nil}, then this functions gives the new file the same last-modified time that the old one has. (This works on only some operating systems.) In an interactive call, this function prompts for @var{filename} and @var{newname} in the minibuffer; also, it requests confirmation if @var{newname} already exists. @end deffn @deffn Command delete-file filename @pindex rm This command deletes the file @var{filename}, like the shell command @samp{rm @var{filename}}. If the file has multiple names, it continues to exist under the other names. A suitable kind of @code{file-error} error is signaled if the file does not exist, or is not deletable. (On Unix, a file is deletable if its directory is writable.) See also @code{delete-directory} in @ref{Create/Delete Dirs}. @end deffn @deffn Command make-symbolic-link filename newname &optional ok-if-exists @pindex ln @kindex file-already-exists This command makes a symbolic link to @var{filename}, named @var{newname}. This is like the shell command @samp{ln -s @var{filename} @var{newname}}. In an interactive call, this function prompts for @var{filename} and @var{newname} in the minibuffer; also, it requests confirmation if @var{newname} already exists. @end deffn @defun define-logical-name varname string This function defines the logical name @var{name} to have the value @var{string}. It is available only on VMS. @end defun @defun set-file-modes filename mode This function sets mode bits of @var{filename} to @var{mode} (which must be an integer). Only the low 12 bits of @var{mode} are used. @end defun @c Emacs 19 feature @defun set-default-file-modes mode This function sets the default file protection for new files created by Emacs and its subprocesses. Every file created with Emacs initially has this protection. On Unix, the default protection is the bitwise complement of the ``umask'' value. The argument @var{mode} must be an integer. Only the low 9 bits of @var{mode} are used. Saving a modified version of an existing file does not count as creating the file; it does not change the file's mode, and does not use the default file protection. @end defun @defun default-file-modes This function returns the current default protection value. @end defun @cindex MS-DOS and file modes @cindex file modes and MS-DOS On MS-DOS, there is no such thing as an ``executable'' file mode bit. So Emacs considers a file executable if its name ends in @samp{.com}, @samp{.bat} or @samp{.exe}. This is reflected in the values returned by @code{file-modes} and @code{file-attributes}. @node File Names @section File Names @cindex file names Files are generally referred to by their names, in Emacs as elsewhere. File names in Emacs are represented as strings. The functions that operate on a file all expect a file name argument. In addition to operating on files themselves, Emacs Lisp programs often need to operate on the names; i.e., to take them apart and to use part of a name to construct related file names. This section describes how to manipulate file names. The functions in this section do not actually access files, so they can operate on file names that do not refer to an existing file or directory. On VMS, all these functions understand both VMS file-name syntax and Unix syntax. This is so that all the standard Lisp libraries can specify file names in Unix syntax and work properly on VMS without change. On MS-DOS, these functions understand MS-DOS file-name syntax as well as Unix syntax. @menu * File Name Components:: The directory part of a file name, and the rest. * Directory Names:: A directory's name as a directory is different from its name as a file. * Relative File Names:: Some file names are relative to a current directory. * File Name Expansion:: Converting relative file names to absolute ones. * Unique File Names:: Generating names for temporary files. * File Name Completion:: Finding the completions for a given file name. @end menu @node File Name Components @subsection File Name Components @cindex directory part (of file name) @cindex nondirectory part (of file name) @cindex version number (in file name) The operating system groups files into directories. To specify a file, you must specify the directory and the file's name within that directory. Therefore, Emacs considers a file name as having two main parts: the @dfn{directory name} part, and the @dfn{nondirectory} part (or @dfn{file name within the directory}). Either part may be empty. Concatenating these two parts reproduces the original file name. On Unix, the directory part is everything up to and including the last slash; the nondirectory part is the rest. The rules in VMS syntax are complicated. For some purposes, the nondirectory part is further subdivided into the name proper and the @dfn{version number}. On Unix, only backup files have version numbers in their names; on VMS, every file has a version number, but most of the time the file name actually used in Emacs omits the version number. Version numbers are found mostly in directory lists. @defun file-name-directory filename This function returns the directory part of @var{filename} (or @code{nil} if @var{filename} does not include a directory part). On Unix, the function returns a string ending in a slash. On VMS, it returns a string ending in one of the three characters @samp{:}, @samp{]}, or @samp{>}. @example @group (file-name-directory "lewis/foo") ; @r{Unix example} @result{} "lewis/" @end group @group (file-name-directory "foo") ; @r{Unix example} @result{} nil @end group @group (file-name-directory "[X]FOO.TMP") ; @r{VMS example} @result{} "[X]" @end group @end example @end defun @defun file-name-nondirectory filename This function returns the nondirectory part of @var{filename}. @example @group (file-name-nondirectory "lewis/foo") @result{} "foo" @end group @group (file-name-nondirectory "foo") @result{} "foo" @end group @group ;; @r{The following example is accurate only on VMS.} (file-name-nondirectory "[X]FOO.TMP") @result{} "FOO.TMP" @end group @end example @end defun @defun file-name-sans-versions filename This function returns @var{filename} without any file version numbers, backup version numbers, or trailing tildes. @example @group (file-name-sans-versions "~rms/foo.~1~") @result{} "~rms/foo" @end group @group (file-name-sans-versions "~rms/foo~") @result{} "~rms/foo" @end group @group (file-name-sans-versions "~rms/foo") @result{} "~rms/foo" @end group @group ;; @r{The following example applies to VMS only.} (file-name-sans-versions "foo;23") @result{} "foo" @end group @end example @end defun @node Directory Names @comment node-name, next, previous, up @subsection Directory Names @cindex directory name @cindex file name of directory A @dfn{directory name} is the name of a directory. A directory is a kind of file, and it has a file name, which is related to the directory name but not identical to it. (This is not quite the same as the usual Unix terminology.) These two different names for the same entity are related by a syntactic transformation. On Unix, this is simple: a directory name ends in a slash, whereas the directory's name as a file lacks that slash. On VMS, the relationship is more complicated. The difference between a directory name and its name as a file is subtle but crucial. When an Emacs variable or function argument is described as being a directory name, a file name of a directory is not acceptable. The following two functions convert between directory names and file names. They do nothing special with environment variable substitutions such as @samp{$HOME}, and the constructs @samp{~}, and @samp{..}. @defun file-name-as-directory filename This function returns a string representing @var{filename} in a form that the operating system will interpret as the name of a directory. In Unix, this means appending a slash to the string. On VMS, the function converts a string of the form @file{[X]Y.DIR.1} to the form @file{[X.Y]}. @example @group (file-name-as-directory "~rms/lewis") @result{} "~rms/lewis/" @end group @end example @end defun @defun directory-file-name dirname This function returns a string representing @var{dirname} in a form that the operating system will interpret as the name of a file. On Unix, this means removing a final slash from the string. On VMS, the function converts a string of the form @file{[X.Y]} to @file{[X]Y.DIR.1}. @example @group (directory-file-name "~lewis/") @result{} "~lewis" @end group @end example @end defun @cindex directory name abbreviation Directory name abbreviations are useful for directories that are normally accessed through symbolic links. Sometimes the users recognize primarily the link's name as ``the name'' of the directory, and find it annoying to see the directory's ``real'' name. If you define the link name as an abbreviation for the ``real'' name, Emacs shows users the abbreviation instead. @defvar directory-abbrev-alist The variable @code{directory-abbrev-alist} contains an alist of abbreviations to use for file directories. Each element has the form @code{(@var{from} . @var{to})}, and says to replace @var{from} with @var{to} when it appears in a directory name. The @var{from} string is actually a regular expression; it should always start with @samp{^}. The function @code{abbreviate-file-name} performs these substitutions. You can set this variable in @file{site-init.el} to describe the abbreviations appropriate for your site. Here's an example, from a system on which file system @file{/home/fsf} and so on are normally accessed through symbolic links named @file{/fsf} and so on. @example (("^/home/fsf" . "/fsf") ("^/home/gp" . "/gp") ("^/home/gd" . "/gd")) @end example @end defvar To convert a directory name to its abbreviation, use this function: @defun abbreviate-file-name dirname This function applies abbreviations from @code{directory-abbrev-alist} to its argument, and substitutes @samp{~} for the user's home directory. @end defun @node Relative File Names @subsection Absolute and Relative File Names @cindex absolute file name @cindex relative file name All the directories in the file system form a tree starting at the root directory. A file name can specify all the directory names starting from the root of the tree; then it is called an @dfn{absolute} file name. Or it can specify the position of the file in the tree relative to a default directory; then it is called a @dfn{relative} file name. On Unix, an absolute file name starts with a slash or a tilde (@samp{~}), and a relative one does not. The rules on VMS are complicated. @defun file-name-absolute-p filename This function returns @code{t} if file @var{filename} is an absolute file name, @code{nil} otherwise. On VMS, this function understands both Unix syntax and VMS syntax. @example @group (file-name-absolute-p "~rms/foo") @result{} t @end group @group (file-name-absolute-p "rms/foo") @result{} nil @end group @group (file-name-absolute-p "/user/rms/foo") @result{} t @end group @end example @end defun @node File Name Expansion @subsection Functions that Expand Filenames @cindex expansion of file names @dfn{Expansion} of a file name means converting a relative file name to an absolute one. Since this is done relative to a default directory, you must specify the default directory name as well as the file name to be expanded. Expansion also simplifies file names by eliminating redundancies such as @file{./} and @file{@var{name}/../}. @defun expand-file-name filename &optional directory This function converts @var{filename} to an absolute file name. If @var{directory} is supplied, it is the directory to start with if @var{filename} is relative. (The value of @var{directory} should itself be an absolute directory name; it may start with @samp{~}.) Otherwise, the current buffer's value of @code{default-directory} is used. For example: @example @group (expand-file-name "foo") @result{} "/xcssun/users/rms/lewis/foo" @end group @group (expand-file-name "../foo") @result{} "/xcssun/users/rms/foo" @end group @group (expand-file-name "foo" "/usr/spool/") @result{} "/usr/spool/foo" @end group @group (expand-file-name "$HOME/foo") @result{} "/xcssun/users/rms/lewis/$HOME/foo" @end group @end example Filenames containing @samp{.} or @samp{..} are simplified to their canonical form: @example @group (expand-file-name "bar/../foo") @result{} "/xcssun/users/rms/lewis/foo" @end group @end example @samp{~/} is expanded into the user's home directory. A @samp{/} or @samp{~} following a @samp{/} is taken to be the start of an absolute file name that overrides what precedes it, so everything before that @samp{/} or @samp{~} is deleted. For example: @example @group (expand-file-name "/a1/gnu//usr/local/lib/emacs/etc/MACHINES") @result{} "/usr/local/lib/emacs/etc/MACHINES" @end group @group (expand-file-name "/a1/gnu/~/foo") @result{} "/xcssun/users/rms/foo" @end group @end example @noindent In both cases, @file{/a1/gnu/} is discarded because an absolute file name follows it. Note that @code{expand-file-name} does @emph{not} expand environment variables; only @code{substitute-in-file-name} does that. @end defun @c Emacs 19 feature @defun file-relative-name filename directory This function does the inverse of expansion---it tries to return a relative name that is equivalent to @var{filename} when interpreted relative to @var{directory}. (If such a relative name would be longer than the absolute name, it returns the absolute name instead.) @example (file-relative-name "/foo/bar" "/foo/") @result{} "bar") (file-relative-name "/foo/bar" "/hack/") @result{} "/foo/bar") @end example @end defun @defvar default-directory The value of this buffer-local variable is the default directory for the current buffer. It should be an absolute directory name; it may start with @samp{~}. This variable is local in every buffer. @code{expand-file-name} uses the default directory when its second argument is @code{nil}. On Unix systems, the value is always a string ending with a slash. @example @group default-directory @result{} "/user/lewis/manual/" @end group @end example @end defvar @defun substitute-in-file-name filename This function replaces environment variables references in @var{filename} with the environment variable values. Following standard Unix shell syntax, @samp{$} is the prefix to substitute an environment variable value. The environment variable name is the series of alphanumeric characters (including underscores) that follow the @samp{$}. If the character following the @samp{$} is a @samp{@{}, then the variable name is everything up to the matching @samp{@}}. @c Wordy to avoid overfull hbox. --rjc 15mar92 Here we assume that the environment variable @code{HOME}, which holds the user's home directory name, has value @samp{/xcssun/users/rms}. @example @group (substitute-in-file-name "$HOME/foo") @result{} "/xcssun/users/rms/foo" @end group @end example If a @samp{~} or a @samp{/} appears following a @samp{/}, after substitution, everything before the following @samp{/} is discarded: @example @group (substitute-in-file-name "bar/~/foo") @result{} "~/foo" @end group @group (substitute-in-file-name "/usr/local/$HOME/foo") @result{} "/xcssun/users/rms/foo" @end group @end example On VMS, @samp{$} substitution is not done, so this function does nothing on VMS except discard superfluous initial components as shown above. @end defun @node Unique File Names @subsection Generating Unique File Names Some programs need to write temporary files. Here is the usual way to construct a name for such a file: @example (make-temp-name (concat "/tmp/" @var{name-of-application})) @end example @noindent Here we use the directory @file{/tmp/} because that is the standard place on Unix for temporary files. The job of @code{make-temp-name} is to prevent two different users or two different jobs from trying to use the same name. @defun make-temp-name string This function generates string that can be used as a unique name. The name starts with @var{string}, and ends with a number that is different in each Emacs job. @example @group (make-temp-name "/tmp/foo") @result{} "/tmp/foo021304" @end group @end example To prevent conflicts among different libraries running in the same Emacs, each Lisp program that uses @code{make-temp-name} should have its own @var{string}. The number added to the end of the name distinguishes between the same application running in different Emacs jobs. @end defun @node File Name Completion @subsection File Name Completion @cindex file name completion subroutines @cindex completion, file name This section describes low-level subroutines for completing a file name. For other completion functions, see @ref{Completion}. @defun file-name-all-completions partial-filename directory This function returns a list of all possible completions for a file whose name starts with @var{partial-filename} in directory @var{directory}. The order of the completions is the order of the files in the directory, which is unpredictable and conveys no useful information. The argument @var{partial-filename} must be a file name containing no directory part and no slash. The current buffer's default directory is prepended to @var{directory}, if @var{directory} is not absolute. In the following example, suppose that the current default directory, @file{~rms/lewis}, has five files whose names begin with @samp{f}: @file{foo}, @file{file~}, @file{file.c}, @file{file.c.~1~}, and @file{file.c.~2~}.@refill @example @group (file-name-all-completions "f" "") @result{} ("foo" "file~" "file.c.~2~" "file.c.~1~" "file.c") @end group @group (file-name-all-completions "fo" "") @result{} ("foo") @end group @end example @end defun @defun file-name-completion filename directory This function completes the file name @var{filename} in directory @var{directory}. It returns the longest prefix common to all file names in directory @var{directory} that start with @var{filename}. If only one match exists and @var{filename} matches it exactly, the function returns @code{t}. The function returns @code{nil} if directory @var{directory} contains no name starting with @var{filename}. In the following example, suppose that the current default directory has five files whose names begin with @samp{f}: @file{foo}, @file{file~}, @file{file.c}, @file{file.c.~1~}, and @file{file.c.~2~}.@refill @example @group (file-name-completion "fi" "") @result{} "file" @end group @group (file-name-completion "file.c.~1" "") @result{} "file.c.~1~" @end group @group (file-name-completion "file.c.~1~" "") @result{} t @end group @group (file-name-completion "file.c.~3" "") @result{} nil @end group @end example @end defun @defopt completion-ignored-extensions @code{file-name-completion} usually ignores file names that end in any string in this list. It does not ignore them when all the possible completions end in one of these suffixes or when a buffer showing all possible completions is displayed.@refill A typical value might look like this: @example @group completion-ignored-extensions @result{} (".o" ".elc" "~" ".dvi") @end group @end example @end defopt @node Contents of Directories @section Contents of Directories @cindex directory-oriented functions @cindex file names in directory A directory is a kind of file that contains other files entered under various names. Directories are a feature of the file system. Emacs can list the names of the files in a directory as a Lisp list, or display the names in a buffer using the @code{ls} shell command. In the latter case, it can optionally display information about each file, depending on the options passed to the @code{ls} command. @defun directory-files directory &optional full-name match-regexp nosort This function returns a list of the names of the files in the directory @var{directory}. By default, the list is in alphabetical order. If @var{full-name} is non-@code{nil}, the function returns the files' absolute file names. Otherwise, it returns the names relative to the specified directory. If @var{match-regexp} is non-@code{nil}, this function returns only those file names that contain a match for that regular expression---the other file names are excluded from the list. @c Emacs 19 feature If @var{nosort} is non-@code{nil}, @code{directory-files} does not sort the list, so you get the file names in no particular order. Use this if you want the utmost possible speed and don't care what order the files are processed in. If the order of processing is visible to the user, then the user will probably be happier if you do sort the names. @example @group (directory-files "~lewis") @result{} ("#foo#" "#foo.el#" "." ".." "dired-mods.el" "files.texi" "files.texi.~1~") @end group @end example An error is signaled if @var{directory} is not the name of a directory that can be read. @end defun @defun file-name-all-versions file dirname This function returns a list of all versions of the file named @var{file} in directory @var{dirname}. @end defun @defun insert-directory file switches &optional wildcard full-directory-p This function inserts (in the current buffer) a directory listing for directory @var{file}, formatted with @code{ls} according to @var{switches}. It leaves point after the inserted text. The argument @var{file} may be either a directory name or a file specification including wildcard characters. If @var{wildcard} is non-@code{nil}, that means treat @var{file} as a file specification with wildcards. If @var{full-directory-p} is non-@code{nil}, that means @var{file} is a directory and switches do not contain @samp{-d}, so that the listing should show the full contents of the directory. (The @samp{-d} option to @code{ls} says to describe a directory itself rather than its contents.) This function works by running a directory listing program whose name is in the variable @code{insert-directory-program}. If @var{wildcard} is non-@code{nil}, it also runs the shell specified by @code{shell-file-name}, to expand the wildcards. @end defun @defvar insert-directory-program This variable's value is the program to run to generate a directory listing for the function @code{insert-directory}. @end defvar @node Create/Delete Dirs @section Creating and Deleting Directories @c Emacs 19 features Most Emacs Lisp file-manipulation functions get errors when used on files that are directories. For example, you cannot delete a directory with @code{delete-file}. These special functions exist to create and delete directories. @defun make-directory dirname This function creates a directory named @var{dirname}. @end defun @defun delete-directory dirname This function deletes the directory named @var{dirname}. The function @code{delete-file} does not work for files that are directories; you must use @code{delete-directory} in that case. @end defun @node Magic File Names @section Making Certain File Names ``Magic'' @cindex magic file names @c Emacs 19 feature You can implement special handling for certain file names. This is called making those names @dfn{magic}. You must supply a regular expression to define the class of names (all those that match the regular expression), plus a handler that implements all the primitive Emacs file operations for file names that do match. The variable @code{file-name-handler-alist} holds a list of handlers, together with regular expressions that determine when to apply each handler. Each element has this form: @example (@var{regexp} . @var{handler}) @end example @noindent All the Emacs primitives for file access and file name transformation check the given file name against @code{file-name-handler-alist}. If the file name matches @var{regexp}, the primitives handle that file by calling @var{handler}. The first argument given to @var{handler} is the name of the primitive; the remaining arguments are the arguments that were passed to that operation. (The first of these arguments is typically the file name itself.) For example, if you do this: @example (file-exists-p @var{filename}) @end example @noindent and @var{filename} has handler @var{handler}, then @var{handler} is called like this: @example (funcall @var{handler} 'file-exists-p @var{filename}) @end example Here are the operations that a magic file name handler gets to handle: @noindent @code{add-name-to-file}, @code{copy-file}, @code{delete-directory}, @code{delete-file},@* @code{directory-file-name}, @code{diff-latest-backup-file}, @code{directory-files}, @code{dired-compress-file}, @code{dired-uncache}, @code{expand-file-name},@* @code{file-accessible-directory-p}, @code{file-attributes}, @code{file-directory-p}, @code{file-executable-p}, @code{file-exists-p}, @code{file-local-copy}, @code{file-modes}, @code{file-name-all-completions}, @code{file-name-as-directory}, @code{file-name-completion}, @code{file-name-directory}, @code{file-name-nondirectory}, @code{file-name-sans-versions}, @code{file-newer-than-file-p}, @code{file-readable-p}, @code{file-symlink-p}, @code{file-truename}, @code{file-writable-p}, @code{insert-directory},@* @code{insert-file-contents}, @code{load}, @code{make-directory}, @code{make-symbolic-link}, @code{rename-file}, @code{set-file-modes}, @code{set-visited-file-modtime}, @code{unhandled-file-name-directory}, @code{verify-visited-file-modtime}, @code{write-region}. Handlers for @code{insert-file-contents} typically need to clear the buffer's modified flag, with @code{(set-buffer-modified-p nil)}, if the @var{visit} argument is non-@code{nil}. This also has the effect of unlocking the buffer if it is locked. The handler function must handle all of the above operations, and possibly others to be added in the future. It need not implement all these operations itself---when it has nothing special to do for a certain operation, it can reinvoke the primitive, to handle the operation ``in the usual way''. It should always reinvoke the primitive for an operation it does not recognize. Here's one way to do this: @smallexample (defun my-file-handler (operation &rest args) ;; @r{First check for the specific operations} ;; @r{that we have special handling for.} (cond ((eq operation 'insert-file-contents) @dots{}) ((eq operation 'write-region) @dots{}) @dots{} ;; @r{Handle any operation we don't know about.} (t (let ((inhibit-file-name-handlers (cons 'my-file-handler (and (eq inhibit-file-name-operation operation) inhibit-file-name-handlers))) (inhibit-file-name-operation operation)) (apply operation args))))) @end smallexample When a handler function decides to call the ordinary Emacs primitive for the operation at hand, it needs to prevent the primitive from calling the same handler once again, thus leading to an infinite recursion. The example above shows how to do this, with the variables @code{inhibit-file-name-handlers} and @code{inhibit-file-name-operation}. Be careful to use them exactly as shown above; the details are crucial for proper behavior in the case of multiple handlers, and for operations that have two file names that may each have handlers. @defvar inhibit-file-name-handlers This variable holds a list of handlers whose use is presently inhibited for a certain operation. @end defvar @defvar inhibit-file-name-operation The operation for which certain handlers are presently inhibited. @end defvar @defun find-file-name-handler file operation This function returns the handler function for file name @var{file}, or @code{nil} if there is none. The argument @var{operation} should be the operation to be performed on the file---the value you will pass to the handler as its first argument when you call it. The operation is needed for comparison with @code{inhibit-file-name-operation}. @end defun @defun file-local-copy filename This function copies file @var{filename} to an ordinary non-magic file, if it isn't one already. If @var{filename} specifies a ``magic'' file name, which programs outside Emacs cannot directly read or write, this copies the contents to an ordinary file and returns that file's name. If @var{filename} is an ordinary file name, not magic, then this function does nothing and returns @code{nil}. @end defun @defun unhandled-file-name-directory filename This function returns the name of a directory that is not magic. It uses the directory part of @var{filename} if that is not magic. Otherwise, it asks the handler what to do. This is useful for running a subprocess; every subprocess must have a non-magic directory to serve as its current directory, and this function is a good way to come up with one. @end defun @node Files and MS-DOS @section Files and MS-DOS @cindex MS-DOS file types @cindex file types on MS-DOS @cindex text files and binary files @cindex binary files and text files Emacs on MS-DOS makes a distinction between text files and binary files. This is necessary because ordinary text files on MS-DOS use a two character sequence between lines: carriage-return and linefeed (CRLF). Emacs expects just a newline character (a linefeed) between lines. When Emacs reads or writes a text file on MS-DOS, it needs to convert the line separators. This means it needs to know which files are text files and which are binary. It makes this decision when visiting a file, and records the decision in the variable @code{buffer-file-type} for use when the file is saved. @xref{MS-DOS Subprocesses}, for a related feature for subprocesses. @defvar buffer-file-type This variable, automatically local in each buffer, records the file type of the buffer's visited file. The value is @code{nil} for text, @code{t} for binary. @end defvar @defun find-buffer-file-type filename This function determines whether file @var{filename} is a text file or a binary file. It returns @code{nil} for text, @code{t} for binary. @end defun @defopt file-name-buffer-file-type-alist This variable holds an alist for distinguishing text files from binary files. Each element has the form (@var{regexp} . @var{type}), where @var{regexp} is matched against the file name, and @var{type} may be is @code{nil} for text, @code{t} for binary, or a function to call to compute which. If it is a function, then it is called with a single argument (the file name) and should return @code{t} or @code{nil}. @end defopt @defopt default-buffer-file-type This variable specifies the default file type for files whose names don't indicate anything in particular. Its value should be @code{nil} for text, or @code{t} for binary. @end defopt @deffn Command find-file-text filename Like @code{find-file}, but treat the file as text regardless of its name. @end deffn @deffn Command find-file-binary filename Like @code{find-file}, but treat the file as binary regardless of its name. @end deffn