Mercurial > emacs
view admin/make-tarball.txt @ 107474:f7e5232d459a
Synch with Gnus trunk
=====================
2010-03-23 Katsumi Yamaoka <yamaoka@jpl.org>
* gnus-art.el (canlock-verify): Autoload it for Emacs 21.
* message.el (ecomplete-setup): Autoload it for Emacs <23.
* mml-sec.el (mml-secure-cache-passphrase): Default to t that is
password-cache's default if it is not bound.
(mml-secure-passphrase-cache-expiry): Default to 16 that is
password-cache-expiry's default if it is not bound.
* pop3.el (pop3-list): Don't use 3rd arg of `split-string' which is not
available in Emacs 21.
2010-03-23 Teodor Zlatanov <tzz@lifelogs.com>
* auth-source.el (auth-sources): Fix up definition so extra parameters
are always inline.
2010-03-22 Martin Stjernholm <mast@lysator.liu.se>
* nnimap.el (nnimap-verify-uidvalidity): Fixed bug where uidvalidity
wasn't updated after mismatch. Clear cached mailbox info correctly
when uidvalidity changes.
(nnimap-group-prefixed-name): New function to avoid some code
duplication.
(nnimap-verify-uidvalidity, nnimap-group-overview-filename)
(nnimap-request-group): Use it.
(nnimap-retrieve-groups, nnimap-verify-uidvalidity)
(nnimap-update-unseen): Significantly improved speed of Gnus startup
with many imap folders. This is done by caching the group status from
the imap server persistently in a group parameter `imap-status'. (This
was cached before too if `nnimap-retrieve-groups-asynchronous' was set,
but not persistently, so every Gnus startup was still very slow.)
2010-03-20 Teodor Zlatanov <tzz@lifelogs.com>
* auth-source.el: Set up autoloads. Bump to 23.2 because of the
secrets.el dependency.
(auth-sources): Add optional user name. Add secrets.el configuration
choice (unused right now).
2010-03-20 Teodor Zlatanov <tzz@lifelogs.com>
* gnus-sum.el (gnus-summary-make-menu-bar): Let
`gnus-registry-install-shortcuts' fill in the functions.
* gnus-registry.el (gnus-summary-misc-menu): Declare to avoid
warnings.
(gnus-registry-misc-menus): Variable to hold registry mark menus.
(gnus-registry-install-shortcuts): Populate and use it in a
`gnus-summary-menu-hook' lambda, under "Gnus"->"Registry Marks".
2010-03-20 Martin Stjernholm <mast@lysator.liu.se>
* nnimap.el (nnimap-decode-group-name, nnimap-encode-group-name):
In-place substitutions for the group name encoding/decoding.
(nnimap-find-minmax-uid, nnimap-possibly-change-group)
(nnimap-retrieve-headers-progress, nnimap-possibly-change-group)
(nnimap-retrieve-headers-progress, nnimap-request-article-part)
(nnimap-update-unseen, nnimap-request-list)
(nnimap-retrieve-groups, nnimap-request-update-info-internal)
(nnimap-request-set-mark, nnimap-split-to-groups)
(nnimap-split-articles, nnimap-request-newgroups)
(nnimap-request-create-group, nnimap-request-accept-article)
(nnimap-request-delete-group, nnimap-request-rename-group)
(nnimap-acl-get, nnimap-acl-edit): Use them. Replace `mbx' with
`encoded-mbx' for consistency.
(nnimap-close-group): Call `imap-current-mailbox' instead of using the
variable `imap-current-mailbox'.
* gnus-agent.el (gnus-agent-fetch-articles, gnus-agent-fetch-headers)
(gnus-agent-regenerate-group): Use `gnus-agent-decoded-group-name'.
2010-03-20 Bojan Petrovic <bpetrovi@f.bg.ac.rs>
* pop3.el (pop3-display-message-size-flag): Display message size byte
counts during POP3 download.
(pop3-movemail): Use it.
(pop3-list): Implement listing of available messages.
2010-03-20 Mark Triggs <mst@dishevelled.net> (tiny change)
* nnir.el (nnir-get-article-nov-override-function): New function to
override the normal NOV retrieval.
(nnir-retrieve-headers): Use it.
author | Katsumi Yamaoka <yamaoka@jpl.org> |
---|---|
date | Tue, 23 Mar 2010 07:38:13 +0000 |
parents | bcfd4263df7b |
children | ed8614d73caa |
line wrap: on
line source
Instructions to create pretest or release tarballs. -- originally written by Gerd Moellmann, amended by Francesco Potort́ with the initial help of Eli Zaretskii For each step, check for possible errors. 1. cvs -q update -Pd 2. Bootstrap to make 100% sure all elc files are up-to-date, and to make sure that the later tagged version will bootstrap, should it be necessary to check it out. 3. Regenerate Emacs' etc/AUTHORS file (M-x load-file RET lisp/emacs-lisp/authors.el RET, then M-x authors RET, then save the *Authors* buffer). This may require fixing syntactically incorrect ChangeLog entries beforehand. 4. Set the version number (M-x load-file RET admin/admin.el RET, then M-x set-version RET). For a release, add released change log entries (M-x add-release-logs RET). For a pretest, start at version .90. After .99, use .990 (so that it sorts). If needed, increment the value of the variable `customize-changed-options-previous-release' in cus-edit.el to refer to a newer release of Emacs. (This is probably needed only when preparing a major Emacs release, or branching for it.) 5. rm configure; autoconf make bootstrap 6. Commit configure, README, doc/emacs/emacs.texi, doc/lispref/elisp.texi, etc/AUTHORS, lisp/version.el, nt/emacs.rc, and lisp/cus-edit.el (if modified). Copy lisp/loaddefs.el to lisp/ldefs-boot.el and commit lisp/ldefs-boot.el. For a release, also commit the ChangeLog files in all directories. 7. make-dist --snapshot. Check the contents of the new tar with admin/diff-tar-files against an older tar file. Some old pretest tarballs are kept under fencepost.gnu.org:~pot/emacs-pretest/, while old emacs tarballs are at <ftp://ftp.gnu.org/pub/gnu/emacs/>. If this is the first pretest of a major release, just comparing with the previous release may overlook many new files. You can try something like `find -f | grep -v CVS...etc' in a clean CVS tree, and compare the results against the new tar contents. 8. xdelta delta emacs-OLD.tar.gz emacs-NEW.tar.gz emacs-OLD-NEW.xdelta 9. tar -zxf emacs-NEW.tar.gz; cd emacs-NEW ./configure && make && make -n install Use `script' or M-x compile to save the compilation log in compile-NEW.log and compare it against an old one. The easiest way to do that is to visit the old log in Emacs, change the version number of the old Emacs to __, do the same with the new log and do M-x ediff. Especially check that Info files aren't built. 10. cd EMACS_ROOT_DIR; cvs tag TAG TAG is EMACS_PRETEST_XX_YY_ZZZ for a pretest, EMACS_XX_YY for a release. Shortly before the release, cut the branch with the following commands: cvs rtag EMACS_`NUMBER'_BASE cvs rtag -b EMACS_`NUMBER'_RC -r EMACS_`NUMBER'_BASE where `NUMBER' is the major version number of the release. This makes it easier to see what changes have been applied to the branch with: cvs diff -r EMACS_`NUMBER'_BASE -r EMACS_`NUMBER'_RC or merge changes back to the trunk with "cvs update -j", if necessary. After doing this, increase the version number on the trunk as per step 4. Also, open a Savannah support request asking for commits to the new branch to be sent to the emacs-diffs mailing list (by default, the list normally only gets commits to the trunk). 11. Now you should upload the files to the GNU ftp server. In order to do that, you must be registered as an Emacs maintainer and have your GPG key acknowledged by the ftp people. Mail <ftp-upload@gnu.org> for instructions. Once you are there, for each file FILE to be released, create a detached GPG binary signature and a clearsigned directive file like this: gpg -b FILE echo directory: emacs/pretest > FILE.directive (for a pretest) echo directory: emacs > FILE.directive (for a release) gpg --clearsign FILE.directive Upload by anonymous ftp to ftp://ftp-upload.gnu.org/ the files FILE, FILE.sig, FILE.directive.asc. For a release, place the files in the /incoming/ftp directory. For a pretest, place the files in /incoming/alpha instead, so that they appear on ftp://alpha.gnu.org/. For a release, upload a bz2 tarfile as well; this can save a lot of bandwidth. 12. After five minutes, verify that the files are visible at ftp://alpha.gnu.org/gnu/emacs/pretest/ for a pretest, at ftp://ftp.gnu.org/gnu/emacs/ for a release. 13. For a pretest, announce it on emacs-devel and BCC the pretesters. For a release, announce it on info-gnu@gnu.org, info-gnu-emacs@gnu.org, and emacs-devel. # arch-tag: c23c771f-ca26-4584-8a04-50ecf0989390