Mercurial > emacs
view install-sh @ 107474:f7e5232d459a
Synch with Gnus trunk
=====================
2010-03-23 Katsumi Yamaoka <yamaoka@jpl.org>
* gnus-art.el (canlock-verify): Autoload it for Emacs 21.
* message.el (ecomplete-setup): Autoload it for Emacs <23.
* mml-sec.el (mml-secure-cache-passphrase): Default to t that is
password-cache's default if it is not bound.
(mml-secure-passphrase-cache-expiry): Default to 16 that is
password-cache-expiry's default if it is not bound.
* pop3.el (pop3-list): Don't use 3rd arg of `split-string' which is not
available in Emacs 21.
2010-03-23 Teodor Zlatanov <tzz@lifelogs.com>
* auth-source.el (auth-sources): Fix up definition so extra parameters
are always inline.
2010-03-22 Martin Stjernholm <mast@lysator.liu.se>
* nnimap.el (nnimap-verify-uidvalidity): Fixed bug where uidvalidity
wasn't updated after mismatch. Clear cached mailbox info correctly
when uidvalidity changes.
(nnimap-group-prefixed-name): New function to avoid some code
duplication.
(nnimap-verify-uidvalidity, nnimap-group-overview-filename)
(nnimap-request-group): Use it.
(nnimap-retrieve-groups, nnimap-verify-uidvalidity)
(nnimap-update-unseen): Significantly improved speed of Gnus startup
with many imap folders. This is done by caching the group status from
the imap server persistently in a group parameter `imap-status'. (This
was cached before too if `nnimap-retrieve-groups-asynchronous' was set,
but not persistently, so every Gnus startup was still very slow.)
2010-03-20 Teodor Zlatanov <tzz@lifelogs.com>
* auth-source.el: Set up autoloads. Bump to 23.2 because of the
secrets.el dependency.
(auth-sources): Add optional user name. Add secrets.el configuration
choice (unused right now).
2010-03-20 Teodor Zlatanov <tzz@lifelogs.com>
* gnus-sum.el (gnus-summary-make-menu-bar): Let
`gnus-registry-install-shortcuts' fill in the functions.
* gnus-registry.el (gnus-summary-misc-menu): Declare to avoid
warnings.
(gnus-registry-misc-menus): Variable to hold registry mark menus.
(gnus-registry-install-shortcuts): Populate and use it in a
`gnus-summary-menu-hook' lambda, under "Gnus"->"Registry Marks".
2010-03-20 Martin Stjernholm <mast@lysator.liu.se>
* nnimap.el (nnimap-decode-group-name, nnimap-encode-group-name):
In-place substitutions for the group name encoding/decoding.
(nnimap-find-minmax-uid, nnimap-possibly-change-group)
(nnimap-retrieve-headers-progress, nnimap-possibly-change-group)
(nnimap-retrieve-headers-progress, nnimap-request-article-part)
(nnimap-update-unseen, nnimap-request-list)
(nnimap-retrieve-groups, nnimap-request-update-info-internal)
(nnimap-request-set-mark, nnimap-split-to-groups)
(nnimap-split-articles, nnimap-request-newgroups)
(nnimap-request-create-group, nnimap-request-accept-article)
(nnimap-request-delete-group, nnimap-request-rename-group)
(nnimap-acl-get, nnimap-acl-edit): Use them. Replace `mbx' with
`encoded-mbx' for consistency.
(nnimap-close-group): Call `imap-current-mailbox' instead of using the
variable `imap-current-mailbox'.
* gnus-agent.el (gnus-agent-fetch-articles, gnus-agent-fetch-headers)
(gnus-agent-regenerate-group): Use `gnus-agent-decoded-group-name'.
2010-03-20 Bojan Petrovic <bpetrovi@f.bg.ac.rs>
* pop3.el (pop3-display-message-size-flag): Display message size byte
counts during POP3 download.
(pop3-movemail): Use it.
(pop3-list): Implement listing of available messages.
2010-03-20 Mark Triggs <mst@dishevelled.net> (tiny change)
* nnir.el (nnir-get-article-nov-override-function): New function to
override the normal NOV retrieval.
(nnir-retrieve-headers): Use it.
author | Katsumi Yamaoka <yamaoka@jpl.org> |
---|---|
date | Tue, 23 Mar 2010 07:38:13 +0000 |
parents | 23a1cea22d13 |
children |
line wrap: on
line source
#! /bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0