view lisp/mail/mspools.el @ 97383:fc2bd95cda23

Use @copying. Change copyright of authors with assignment to FSF. Change license to GFDL. (Top): Remove outdated references.

;;; mspools.el --- show mail spools waiting to be read

;; Copyright (C) 1997, 2001, 2002, 2003, 2004, 2005,
;;   2006, 2007, 2008 Free Software Foundation, Inc.

;; Author: Stephen Eglen <[e-mail]>
;; Maintainer: Stephen Eglen <[e-mail]>
;; Created: 22 Jan 1997
;; Keywords: mail
;; location: http://www.anc.ed.ac.uk/~stephen/emacs/

;; This file is part of GNU Emacs.

;; GNU Emacs is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation, either version 3 of the License, or
;; (at your option) any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.

;;; Commentary:

;; If you use a mail filter (e.g. procmail, filter) to put mail messages in
;; folders, this file will let you see which folders have mail waiting
;; to be read in them.  It assumes that new mail for the file `folder'
;; is written by the filter to a file called `folder.spool'.  (If the
;; file writes directly to `folder' you may lose mail if new mail
;; arrives whilst you are reading the folder in emacs, hence the use
;; of a spool file.)  For example, the following procmail recipe puts
;; any mail with `emacs' in the subject line into the spool file
;; `emacs.spool', ready to go into the folder `emacs'.
;:0:
;* ^Subject.*emacs
;emacs.spool

;; It also assumes that all of your spool files and mail folders live
;; in the directory pointed to by `mspools-folder-directory', so you must
;; set this (see Installation).

;; When you run `mspools-show', it creates a *spools* buffer containing
;; all of the spools in the folder directory that are waiting to be
;; read.  On each line is the spool name and its size in bytes.  Move
;; to the line of the folder that you would like to read, and then
;; press return or space.  The mailer (VM or RMAIL) should then read
;; that folder and get the new mail for you.  When you return to the
;; *spools* buffer, you will either see "*" to indicate that the spool
;; has been read, or the remaining unread spools, depending on the
;; value of `mspools-update'.

;; This file should work with both VM and RMAIL.  See the variable
;; `mspools-using-vm' for details.

;;; Basic installation.
;; (autoload 'mspools-show "mspools" "Show outstanding mail spools." t)
;; (setq mspools-folder-directory "~/MAIL/")
;;
;; If you use VM, mspools-folder-directory will default to vm-folder-directory
;; unless you have already given it a value.

;; Extras.
;;
;; (global-set-key '[S-f1] 'mspools-show) ;Bind mspools-show to Shift F1.
;; (setq mspools-update t)                ;Automatically update buffer.

;; Interface with the mail filter.
;; We assume that the mail filter drops new mail into the spool
;; `folder.spool'.  If your spool files are something like folder.xyz
;; for inbox `folder', then do:
;; (setq mspools-suffix "xyz")
;; If you use other conventions for your spool files, this code will
;; need rewriting.

;; Warning for VM users
;; Don't use if you are not sure what you are doing.  The value of
;; vm-spool-files is altered, so you may not be able to read incoming
;; mail with VM if this is incorrectly set.

;; Useful settings for VM
;; vm-auto-get-new-mail should be t (the default).

;; Acknowledgements
;; Thanks to [e-mail] (Jonathan Doughty) for help with code for
;; setting up vm-spool-files.

;;; TODO

;; What if users have mail spools in more than one directory?  Extend
;; mspools-folder-directory to be a list of directories?  Currently,
;; if mail spools are in other directories, the way to read them is to
;; put a symbolic link to the spool into the mspools-folder-directory.

;; I was going to add mouse support so that you could click on a line
;; to visit the buffer.  Tell me if you want it, and I can put the
;; code in (I don't use the mouse much, so I haven't bothered with it
;; so far).

;; Rather than showing size in bytes, could we see the number of msgs
;; waiting?  (Could be more time demanding / system dependent).
;; Maybe just call a perl script to do all the hard work, and
;; visualize the results in the buffer.

;; Shrink wrap the buffer to remove excess white-space?

;;; Code:

(defvar rmail-inbox-list)
(defvar vm-crash-box)
(defvar vm-folder-directory)
(defvar vm-init-file)
(defvar vm-init-file-loaded)
(defvar vm-primary-inbox)
(defvar vm-spool-files)

;;; User Variables

(defgroup mspools nil
  "Show mail spools waiting to be read."
  :group 'mail
  :link '(emacs-commentary-link :tag "Commentary" "mspools.el")
)

(defcustom mspools-update nil
  "*Non-nil means update *spools* buffer after visiting any folder."
  :type 'boolean
  :group 'mspools)

(defcustom mspools-suffix "spool"
  "*Extension used for spool files (not including full stop)."
  :type 'string
  :group 'mspools)

(defcustom mspools-using-vm  (fboundp 'vm)
  "*Non-nil if VM is used as mail reader, otherwise RMAIL is used."
  :type 'boolean
  :group 'mspools)

(defcustom mspools-folder-directory
  (if (boundp 'vm-folder-directory)
      vm-folder-directory
    "~/MAIL/")
  "*Directory where mail folders are kept.  Ensure it has a trailing /.
Defaults to `vm-folder-directory' if bound else to ~/MAIL/."
  :type 'directory
  :group 'mspools)

(defcustom mspools-vm-system-mail (or (getenv "MAIL")
				      (concat rmail-spool-directory
					      (user-login-name)))
  "*Spool file for main mailbox.  Only used by VM.
This needs to be set to your primary mail spool - mspools will not run
without it.  By default this will be set to the environment variable
$MAIL.  Otherwise it will use `rmail-spool-directory' to guess where
your primary spool is.  If this fails, set it to something like
/usr/spool/mail/login-name."
  :type 'file
  :group 'mspools)

;;; Internal Variables

(defvar mspools-files nil
  "List of entries (SPOOL . SIZE) giving spool name and file size.")

(defvar mspools-files-len nil
  "Length of `mspools-files' list.")

(defvar mspools-buffer "*spools*"
  "Name of buffer for displaying spool info.")

(defvar mspools-mode-map nil
  "Keymap for the *spools* buffer.")

;;; Code

;;; VM Specific code
(if mspools-using-vm
    ;; set up vm if not already loaded.
    (progn
      (require 'vm-vars)
      (if (and (not vm-init-file-loaded) (file-readable-p vm-init-file))
	  (load-file vm-init-file))
      (if (not mspools-folder-directory)
	  (setq mspools-folder-directory vm-folder-directory))
      ))

(defun mspools-set-vm-spool-files ()
  "Set value of `vm-spool-files'.  Only needed for VM."
  (if (not (file-readable-p mspools-vm-system-mail))
      (error "Need to set mspools-vm-system-mail to the spool for primary inbox"))
  (if (null mspools-folder-directory)
      (error "Set `mspools-folder-directory' to where the spool files are"))
  (setq
   vm-spool-files
   (append
    (list
     ;; Main mailbox
     (list vm-primary-inbox
	   mspools-vm-system-mail	; your mailbox
	   vm-crash-box			;crash for mailbox
	   ))

    ;; Mailing list inboxes
    ;; must have VM already loaded to get vm-folder-directory.
    (mapcar '(lambda (s)
	       "make the appropriate entry for vm-spool-files"
	       (list
		(concat mspools-folder-directory s)
		(concat mspools-folder-directory s "." mspools-suffix)
		(concat mspools-folder-directory s ".crash")))
	    ;; So I create a vm-spool-files entry for each of those mail drops
	    (mapcar 'file-name-sans-extension
		    (directory-files mspools-folder-directory nil
				     (format "^[^.]+\\.%s" mspools-suffix)))
	    ))
   ))

;;; MSPOOLS-SHOW -- the main function
(defun mspools-show ( &optional noshow)
  "Show the list of non-empty spool files in the *spools* buffer.
Buffer is not displayed if SHOW is non-nil."
  (interactive)
  (if (get-buffer mspools-buffer)
      ;; buffer exists
      (progn
	(set-buffer mspools-buffer)
	(setq buffer-read-only nil)
	(delete-region (point-min) (point-max)))
    ;; else buffer doesn't exist so create it
    (get-buffer-create mspools-buffer))

  ;; generate the list of spool files
  (if mspools-using-vm
      (mspools-set-vm-spool-files))

  (mspools-get-spool-files)
  (if (not noshow) (pop-to-buffer mspools-buffer))

  (setq buffer-read-only t)
  (mspools-mode)
  )

(declare-function rmail-get-new-mail "rmail" (&optional file-name))

;; External.
(declare-function vm-visit-folder "ext:vm-startup" (folder &optional read-only))

(defun mspools-visit-spool ()
  "Visit the folder on the current line of the *spools* buffer."
  (interactive)
  (let ( spool-name folder-name)
    (setq spool-name (mspools-get-spool-name))
    (if (null spool-name)
	(message "No spool on current line")

      (setq folder-name (mspools-get-folder-from-spool spool-name))

      ;; put in a little "*" to indicate spool file has been read.
      (if (not mspools-update)
	  (save-excursion
	    (setq buffer-read-only nil)
	    (beginning-of-line)
	    (insert "*")
	    (delete-char 1)
	    (setq buffer-read-only t)
	    ))

      (message "folder %s spool %s" folder-name spool-name)
      (if (eq (count-lines (point-min)
			   (save-excursion
			     (end-of-line)
			     (point)))
	      mspools-files-len)
	  (forward-line (- 1 mspools-files-len)) ;back to top of list
	;; else just on to next line
	(forward-line 1))

      ;; Choose whether to use VM or RMAIL for reading folder.
      (if mspools-using-vm
	  (vm-visit-folder (concat mspools-folder-directory folder-name))
	;; else using RMAIL
	(rmail (concat mspools-folder-directory folder-name))
	(setq rmail-inbox-list
	      (list (concat mspools-folder-directory spool-name)))
	(rmail-get-new-mail))


      (if mspools-update
	  ;; generate new list of spools.
	  (save-excursion
	    (mspools-show-again 'noshow))))))

(defun mspools-get-folder-from-spool (name)
  "Return folder name corresponding to the spool file NAME."
  ;; Simply strip of the extension.
  (file-name-sans-extension name))

;; Alternative version if you have more complicated mapping of spool name
;; to file name.
;(defun get-folder-from-spool-safe (name)
;  "Return the folder name corresponding to the spool file NAME."
;  (if (string-match "^\\(.*\\)\.spool$" name)
;      (substring name (match-beginning 1) (match-end 1))
;    (error "Could not extract folder name from spool name %s" name)))

; test
;(mspools-get-folder-from-spool "happy.spool")
;(mspools-get-folder-from-spool "happy.sp")

(defun mspools-get-spool-name ()
  "Return the name of the spool on the current line."
  (let ((line-num (1- (count-lines (point-min)
				   (save-excursion
				     (end-of-line)
				     (point))
				   ))))
    (car (nth line-num mspools-files))))

;;; Keymap

(if mspools-mode-map
    ()
  (setq mspools-mode-map (make-sparse-keymap))

  (define-key mspools-mode-map "\C-c\C-c" 'mspools-visit-spool)
  (define-key mspools-mode-map "\C-m" 'mspools-visit-spool)
  (define-key mspools-mode-map " " 'mspools-visit-spool)
  (define-key mspools-mode-map "?" 'mspools-help)
  (define-key mspools-mode-map "q" 'mspools-quit)
  (define-key mspools-mode-map "n" 'next-line)
  (define-key mspools-mode-map "p" 'previous-line)
  (define-key mspools-mode-map "g" 'revert-buffer))

;;; Spools mode functions

(defun mspools-revert-buffer (ignore noconfirm)
  "Re-run mspools-show to revert the *spools* buffer."
  (mspools-show 'noshow))

(defun mspools-show-again (&optional noshow)
  "Update the *spools* buffer.  This is useful if mspools-update is
nil."
  (interactive)
  (mspools-show noshow))

(defun mspools-help ()
  "Show help for `mspools-mode'."
  (interactive)
  (describe-function 'mspools-mode))

(defun mspools-quit ()
  "Quit the *spools* buffer."
  (interactive)
  (kill-buffer mspools-buffer))

(defun mspools-mode ()
  "Major mode for output from mspools-show.
\\<mspools-mode-map>Move point to one of the items in this buffer, then use
\\[mspools-visit-spool] to go to the spool that the current line refers to.
\\[revert-buffer] to regenerate the list of spools.
\\{mspools-mode-map}"
  (kill-all-local-variables)
  (make-local-variable 'revert-buffer-function)
  (setq revert-buffer-function 'mspools-revert-buffer)
  (use-local-map mspools-mode-map)
  (setq major-mode 'mspools-mode)
  (setq mode-name "MSpools")
  (run-mode-hooks 'mspools-mode-hook))

(defun mspools-get-spool-files ()
  "Find the list of spool files and display them in *spools* buffer."
  (let (folders head spool len beg end any)
    (if (null mspools-folder-directory)
	(error "Set `mspools-folder-directory' to where the spool files are"))
    (setq folders (directory-files mspools-folder-directory nil
				   (format "^[^.]+\\.%s$" mspools-suffix)))
    (setq folders (mapcar 'mspools-size-folder folders))
    (setq folders (delq nil folders))
    (setq mspools-files folders)
    (setq mspools-files-len (length mspools-files))
    (set-buffer mspools-buffer)
    (while folders
      (setq any t)
      (setq head (car folders))
      (setq spool (car head))
      (setq len (cdr head))
      (setq folders (cdr folders))
      (setq beg (point))
      (insert (format " %10d %s" len spool))
      (setq end (point))
      (insert "\n")
      ;;(put-text-property beg end 'mouse-face 'highlight)
      )
    (if any
	(delete-char -1))			;delete last RET
    (goto-char (point-min))
    ))

(defun mspools-size-folder (spool)
  "Return (SPOOL . SIZE ), if SIZE of spool file is non-zero."
  ;; 7th file attribute is the size of the file in bytes.
  (let ((file (concat mspools-folder-directory spool))
	size)
    (setq file (or (file-symlink-p file) file))
    (setq size (nth 7 (file-attributes file)))
    ;; size could be nil if the sym-link points to a non-existent file
    ;; so check this first.
    (if (and size  (> size 0))
	(cons spool  size)
      ;; else SPOOL is empty
      nil)))

(provide 'mspools)

;; arch-tag: 8990b3ee-68c8-4892-98f1-51a735c8bac6
;;; mspools.el ends here