Mercurial > emacs

#  -*- Makefile -*- definition file for building GNU Emacs on Windows NT.
#  Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
#    2008, 2009, 2010 Free Software Foundation, Inc.

# This file is part of GNU Emacs.

# GNU Emacs is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.


# Ensure 'all' is the default target
all:

THE_SHELL = $(COMSPEC)
SHELLTYPE=CMD

MAKETYPE=nmake

CURDIR		= $(MAKEDIR:\=/)
THISDIR		= $(MAKEDIR)

ALL_DEPS	= $**

SUBSYSTEM_WINDOWS=-subsystem:windows
SUBSYSTEM_CONSOLE=-subsystem:console

# INSTALL_DIR is the directory into which emacs will be installed.
#
!ifndef INSTALL_DIR
INSTALL_DIR     = $(CURDIR)/..
!endif

# Ensure EMACSLOADPATH is defined in the environment.
#
!if [set EMACSLOADPATH=foo]
!endif

# Allow detection of builds with MSVC 5 or later, so we can
# speed up compiles (see rule at end).
#
_NMAKE_VER_5=162
_NMAKE_VER_4=0

!IFNDEF _NMAKE_VER
_NMAKE_VER=$(_NMAKE_VER_4)
!ENDIF

# Check that the INCLUDE and LIB environment variables are set.
#
!ifndef INCLUDE
!error The INCLUDE environment variable needs to be set.
!endif
!ifndef LIB
!error The LIB environment variable needs to be set.
!endif

# Determine the architecture we're running on.
# Define ARCH for our purposes;
# Define CPU for use by ntwin32.mak;
# Define CONFIG_H to the appropriate config.h for the system;
#
!ifdef PROCESSOR_ARCHITECTURE
# We're on Windows NT
CPU		= $(PROCESSOR_ARCHITECTURE)
CONFIG_H	= config.nt
OS_TYPE		= windowsnt
! if "$(PROCESSOR_ARCHITECTURE)" == "x86"
ARCH		= i386
CPU		= i386
! else
!  if "$(PROCESSOR_ARCHITECTURE)" == "MIPS"
ARCH		= mips
!  else
!   if "$(PROCESSOR_ARCHITECTURE)" == "ALPHA"
ARCH		= alpha
!   else
!    if "$(PROCESSOR_ARCHITECTURE)" == "PPC"
ARCH		= ppc
!    else
!     error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)"
!    endif
!   endif
!  endif
! endif
!else
# We're on Windows 95
ARCH		= i386
CPU		= i386
CONFIG_H	= config.nt
OS_TYPE		= windows95
!endif

AR		= lib
AR_OUT		= -out:
CC		= cl
CC_OUT		= -Fo
LINK		= link
LINK_OUT	= -out:
RC		= rc
RC_OUT		= -Fo
RC_INCLUDE	= -i

libc		= libc.lib
baselibs	=
O		= obj
A		= lib

BASE_LIBS	= $(libc) $(baselibs) oldnames.lib

ADVAPI32	= advapi32.lib
COMCTL32	= comctl32.lib
COMDLG32	= comdlg32.lib
GDI32		= gdi32.lib
MPR		= mpr.lib
SHELL32		= shell32.lib
USER32		= user32.lib
WSOCK32		= wsock32.lib
WINMM		= winmm.lib
WINSPOOL	= winspool.lib
OLE32		= ole32.lib
UNISCRIBE	= usp10.lib
UUID		= uuid.lib

!ifdef NOOPT
DEBUG_CFLAGS	= -DEMACSDEBUG
!else
DEBUG_CFLAGS	=
!endif

!ifdef ENABLECHECKS
CHECKING_CFLAGS	= -DENABLE_CHECKING -DXASSERTS
!else
CHECKING_CFLAGS	=
!endif

CFLAGS          = -I. $(ARCH_CFLAGS) \
		  $(DEBUG_CFLAGS) $(CHECKING_CFLAGS) $(USER_CFLAGS) $(LOCAL_FLAGS)
EMACS_EXTRA_C_FLAGS =

SYS_LDFLAGS	= -nologo -release -incremental:no -version:3.10 -swaprun:cd -swaprun:net setargv.obj

# see comments in allocate_heap in w32heap.c before changing any of the
# -stack, -heap, or -base settings.
TEMACS_EXTRA_LINK = -stack:0x00800000 -heap:0x00100000 -base:0x01000000 -pdb:$(BLD)\temacs.pdb -machine:$(ARCH) $(SUBSYSTEM_CONSOLE) -entry:_start -map:$(BLD)\temacs.map $(EXTRA_LINK)

!ifdef NOOPT
OBJDIR          = obj
!else
OBJDIR          = obj-spd
!endif
$(OBJDIR):;	-mkdir $(OBJDIR)
BLD             = $(OBJDIR)/$(ARCH)
stamp_BLD:      $(OBJDIR)
		-mkdir "$(BLD)"
		echo $(BLD) > $@

COMPILER_TEMP_FILES = *.pdb

CP		= cp -f
CP_DIR		= cp -rf
IFNOTSAMEDIR	= if not exist ..\same-dir.tst
ENDIF		=
FOREACH		= for %%f in (
FORVAR		= %%f
FORDO		= ) do
ENDFOR		=
ARGQUOTE	= "
# "
DQUOTE		= \"
DEL		= rm
DEL_TREE	= rm -r

!ifdef NODEBUG
DEBUG_FLAG =
DEBUG_LINK =
!else
DEBUG_FLAG = -Zi
DEBUG_LINK = -debug:full
!endif

!if "$(ARCH)" == "i386"
!ifdef NOOPT
ARCH_CFLAGS     = -nologo -c -Zel -W2 -H63 -Od -G3d -Zp8 $(DEBUG_FLAG)
!else
ARCH_CFLAGS     = -nologo -c -Zel -W2 -H63 -Oxsb2 -Oy- -G6dF -Zp8 $(DEBUG_FLAG)
!endif
ARCH_LDFLAGS	= $(SYS_LDFLAGS)

!else
!if "$(ARCH)" == "mips"
ARCH_CFLAGS     = -D_MIPS_=1 -c -W2 -Zi -Od -Gt0
ARCH_LDFLAGS	= $(SYS_LDFLAGS)

!else
!if "$(ARCH)" == "alpha"
!if "$(BUILD_TYPE)" == "spd"
ARCH_CFLAGS     = -D_ALPHA_=1 -c -Ze -Zi -W2 -Od -D__stdcall= -D__cdecl=
!else
ARCH_CFLAGS     = -D_ALPHA_=1 -c -Ze -Zi -W2 -O1 -D__stdcall= -D__cdecl=
!endif
ARCH_LDFLAGS	= $(SYS_LDFLAGS)

!else
!if "$(ARCH)" == "ppc"
# These flags are a guess...if they don't work, please send me mail.
ARCH_CFLAGS	= -D_PPC_=1 -c -Ze -Zi -W2 -Od
ARCH_LDFLAGS	= $(SYS_LDFLAGS)

!else
!ERROR Unknown architecture type "$(ARCH)".
!endif
!endif
!endif
!endif

LINK_FLAGS	= $(ARCH_LDFLAGS) $(DEBUG_LINK) $(USER_LDFLAGS)

# From MSVC 5.0 onwards, it seem base relocation information is not included,
# at least in release builds.  We need to ensure the reloc info is included
# in order to use the MSVC profiler.
!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)")
EXTRA_LINK      =
!ELSE
EXTRA_LINK      = -profile
!ENDIF

#
# If the compiler supports compiling multiple .c files to .o files at
# one time, use this feature.
#
!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)")
.c{$(BLD)}.obj:
		$(CC) $(CFLAGS) -Fo$(BLD)\ $<
!ELSE
.c{$(BLD)}.obj::
		$(CC) $(CFLAGS) -Fo$(BLD)\ $<
!ENDIF

# arch-tag: fefa49b0-c23c-46c7-9094-cab2a405058e
author	Jan D <jan.h.d@swipnet.se>
date	Wed, 11 Aug 2010 10:20:34 +0200
parents	a2184d0e089b
children	417b1e4d63cd