# HG changeset patch # User Jim Blandy # Date 738709082 0 # Node ID 229c089f1d6fbf6b1fc97e450461fc8ffaa5ccdd # Parent 4bf437bb0180801c4cc6e6ed33e7f209df517d30 *** empty log message *** diff -r 4bf437bb0180 -r 229c089f1d6f src/m/tekxd88.h --- a/src/m/tekxd88.h Sat May 29 20:57:51 1993 +0000 +++ b/src/m/tekxd88.h Sat May 29 20:58:02 1993 +0000 @@ -1,184 +1,184 @@ -+/* m- file for Tektronix XD88 running UTekV 3.2e to be used with s-usg5-3.h, -+ contributed by Kaveh Ghazi (ghazi@caip.rutgers.edu) 1/15/93. -+ You probably need to use gnu make (version 3.63 or higher.) -+ Copyright (C) 1993 Free Software Foundation, Inc. -+ -+This file is part of GNU Emacs. -+ -+GNU Emacs is distributed in the hope that it will be useful, -+but WITHOUT ANY WARRANTY. No author or distributor -+accepts responsibility to anyone for the consequences of using it -+or for whether it serves any particular purpose or works at all, -+unless he says so in writing. Refer to the GNU Emacs General Public -+License for full details. -+ -+Everyone is granted permission to copy, modify and redistribute -+GNU Emacs, but only under the conditions described in the -+GNU Emacs General Public License. A copy of this license is -+supposed to have been given to you along with GNU Emacs so you -+can know your rights and responsibilities. It should be in a -+file named COPYING. Among other things, the copyright notice -+and this notice must be preserved on all copies. */ -+ -+/* The following three symbols give information on -+ the size of various data types. */ -+#define SHORTBITS 16 /* Number of bits in a short */ -+#define INTBITS 32 /* Number of bits in an int */ -+#define LONGBITS 32 /* Number of bits in a long */ -+ -+/* Define BIG_ENDIAN iff lowest-numbered byte in a word -+ is the most significant byte. */ -+#define BIG_ENDIAN -+ -+/* Define NO_ARG_ARRAY if you cannot take the address of the first of a -+ * group of arguments and treat it as an array of the arguments. */ -+#define NO_ARG_ARRAY -+ -+/* Define WORD_MACHINE if addresses and such have -+ * to be corrected before they can be used as byte counts. */ -+/* #define WORD_MACHINE */ -+ -+/* Now define a symbol for the cpu type, if your compiler -+ does not define it automatically: -+ Ones defined so far include vax, m68000, ns16000, pyramid, -+ orion, tahoe, APOLLO and many others */ -+#ifndef m88000 /* Some 88k C compilers already define this */ -+#define m88000 -+#endif -+ -+/* Define how to take a char and sign-extend into an int. -+ On machines where char is signed, this is a no-op. */ -+#define SIGN_EXTEND_CHAR(c) (c) -+ -+/* Now define a symbol for the cpu type, if your compiler -+ does not define it automatically. */ -+ -+ -+/* Use type int rather than a union, to represent Lisp_Object */ -+/* This is desirable for most machines. */ -+#define NO_UNION_TYPE -+ -+/* Define EXPLICIT_SIGN_EXTEND if XINT must explicitly sign-extend -+ the 24-bit bit field into an int. In other words, if bit fields -+ are always unsigned. -+ -+ If you use NO_UNION_TYPE, this flag does not matter. */ -+/* #define EXPLICIT_SIGN_EXTEND */ -+ -+/* Data type of load average, as read out of kmem. */ -+/* No load average on XD88 machines. */ -+/* #define LOAD_AVE_TYPE double */ -+ -+/* Convert that into an integer that is 100 for a load average of 1.0 */ -+/* #define LOAD_AVE_CVT(x) ((int) ((x) * 100.0)) */ -+ -+/* Define CANNOT_DUMP on machines where unexec does not work. -+ Then the function dump-emacs will not be defined -+ and temacs will do (load "loadup") automatically unless told otherwise. */ -+#define CANNOT_DUMP /* oh well, maybe someday ... */ -+ -+/* Define VIRT_ADDR_VARIES if the virtual addresses of -+ pure and impure space as loaded can vary, and even their -+ relative order cannot be relied on. -+ -+ Otherwise Emacs assumes that text space precedes data space, -+ numerically. */ -+/* #define VIRT_ADDR_VARIES */ -+ -+/* Define NO_REMAP if memory segmentation makes it not work well -+ to change the boundary between the text section and data section -+ when Emacs is dumped. If you define this, the preloaded Lisp -+ code will not be sharable; but that's better than failing completely. */ -+#define NO_REMAP -+ -+/* Define C_ALLOCA if this machine does not support a true alloca -+ and the one written in C should be used instead. -+ Define HAVE_ALLOCA to say that the system provides a properly -+ working alloca function and it should be used. -+ Define neither one if an assembler-language alloca -+ in the file alloca.s should be used. */ -+#ifdef __GNUC__ -+# define alloca __builtin_alloca /* Use the gcc builtin alloca() ... */ -+# define HAVE_ALLOCA /* ... and be sure that no other ones are tried out. */ -+# undef C_ALLOCA -+# define C_OPTIMIZE_SWITCH -O2 -+#else /* not __GNUC__ */ -+# undef HAVE_ALLOCA -+# define C_ALLOCA /* Use the alloca() supplied in alloca.c. */ -+# define STACK_DIRECTION -1 /* The stack grows towards lower addresses. */ -+# define C_OPTIMIZE_SWITCH -O -+#endif /* __GNUC__ */ -+ -+/*#define C_DEBUG_SWITCH C_OPTIMIZE_SWITCH*/ /* Uncomment this to optimize */ -+ -+/* XD88 SysV has PTYs. Not all usg3-5 systems do, so this is defined here. */ -+#define HAVE_PTYS -+#define SYSV_PTYS /* Requires */ -+ -+/* we have job control */ -+#undef NOMULTIPLEJOBS -+ -+/* -+ * sockets are available -+ */ -+#define HAVE_SOCKETS -+ -+/* -+ * we have Berkeley style -+ */ -+#define HAVE_TIMEVAL -+ -+/* XD88 has select(). */ -+#define HAVE_SELECT -+#define BROKEN_FIONREAD /* is this needed ? */ -+ -+/* -+ * don't use utimes, we ain't got one - use utime() instead -+ */ -+#define USE_UTIME -+ -+#define NO_SIOCTL_H -+ -+/* We need HAVE_TCATTR to prevent Ctrl-Z from suspending Emacs before -+ suspend-emacs has been called. */ -+/*#define HAVE_TCATTR*/ -+/* TCATTR gives bogus baud rates. Use the following for OSPEED instead. */ -+/*#define OSPEED(str) (cfgetospeed(&(str)))*/ -+#define HAVE_TERMIOS -+#undef HAVE_TERMIO -+ -+#define BSTRING /* its in libc but not declared in any <*.h> file. */ -+#define HAVE_TZSET -+#define HAVE_SETSID -+#define HAVE_RENAME -+ -+#ifdef ghs /* Stands for "Green Hills Software", defined in /bin/cc */ -+/* Only required for use with the Green Hills compiler: -+ -X18 Do not allocate programmer-defined local variables to a -+ register unless they are declared register. (From building -+ perl-4.036 Green Hills hints. Might be needed for setjmp.) -+ */ -+#define C_SWITCH_MACHINE -X18 -+/* We need /lib/default.ld so the bundled ld can read its link directives. */ -+#define LD_SWITCH_SYSTEM /lib/default.ld -+#endif /* ghs */ -+ -+/* XD88 does not have the random() and srandom() calls in the base system, -+ but they exist in libX11.a. So, if you are building with X11 then you -+ will need to define HAVE_RANDOM. */ -+#ifdef HAVE_X_WINDOWS -+#define HAVE_RANDOM -+#undef LIB_X11_LIB /* don't use the shared library default from usg5-3.h */ -+#undef LIBX11_SYSTEM -+#endif /* HAVE_X_WINDOWS */ -+ -+/*#define SYSTEM_MALLOC*/ -+ -+#ifndef UTEKV -+#define UTEKV /* system specific symbol */ -+#endif /* !UTEKV */ -+ -+/* stuff to hopefully someday get dumping working ... */ -+/*#define SECTION_ALIGNMENT 0x1ff*/ -+/*#define SEGMENT_MASK 0xff*/ -+/*#define A_TEXT_OFFSET(HDR) sizeof(HDR)*/ +/* m- file for Tektronix XD88 running UTekV 3.2e to be used with s-usg5-3.h, + contributed by Kaveh Ghazi (ghazi@caip.rutgers.edu) 1/15/93. + You probably need to use gnu make (version 3.63 or higher.) + Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GNU Emacs. + +GNU Emacs is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY. No author or distributor +accepts responsibility to anyone for the consequences of using it +or for whether it serves any particular purpose or works at all, +unless he says so in writing. Refer to the GNU Emacs General Public +License for full details. + +Everyone is granted permission to copy, modify and redistribute +GNU Emacs, but only under the conditions described in the +GNU Emacs General Public License. A copy of this license is +supposed to have been given to you along with GNU Emacs so you +can know your rights and responsibilities. It should be in a +file named COPYING. Among other things, the copyright notice +and this notice must be preserved on all copies. */ + +/* The following three symbols give information on + the size of various data types. */ +#define SHORTBITS 16 /* Number of bits in a short */ +#define INTBITS 32 /* Number of bits in an int */ +#define LONGBITS 32 /* Number of bits in a long */ + +/* Define BIG_ENDIAN iff lowest-numbered byte in a word + is the most significant byte. */ +#define BIG_ENDIAN + +/* Define NO_ARG_ARRAY if you cannot take the address of the first of a + * group of arguments and treat it as an array of the arguments. */ +#define NO_ARG_ARRAY + +/* Define WORD_MACHINE if addresses and such have + * to be corrected before they can be used as byte counts. */ +/* #define WORD_MACHINE */ + +/* Now define a symbol for the cpu type, if your compiler + does not define it automatically: + Ones defined so far include vax, m68000, ns16000, pyramid, + orion, tahoe, APOLLO and many others */ +#ifndef m88000 /* Some 88k C compilers already define this */ +#define m88000 +#endif + +/* Define how to take a char and sign-extend into an int. + On machines where char is signed, this is a no-op. */ +#define SIGN_EXTEND_CHAR(c) (c) + +/* Now define a symbol for the cpu type, if your compiler + does not define it automatically. */ + + +/* Use type int rather than a union, to represent Lisp_Object */ +/* This is desirable for most machines. */ +#define NO_UNION_TYPE + +/* Define EXPLICIT_SIGN_EXTEND if XINT must explicitly sign-extend + the 24-bit bit field into an int. In other words, if bit fields + are always unsigned. + + If you use NO_UNION_TYPE, this flag does not matter. */ +/* #define EXPLICIT_SIGN_EXTEND */ + +/* Data type of load average, as read out of kmem. */ +/* No load average on XD88 machines. */ +/* #define LOAD_AVE_TYPE double */ + +/* Convert that into an integer that is 100 for a load average of 1.0 */ +/* #define LOAD_AVE_CVT(x) ((int) ((x) * 100.0)) */ + +/* Define CANNOT_DUMP on machines where unexec does not work. + Then the function dump-emacs will not be defined + and temacs will do (load "loadup") automatically unless told otherwise. */ +#define CANNOT_DUMP /* oh well, maybe someday ... */ + +/* Define VIRT_ADDR_VARIES if the virtual addresses of + pure and impure space as loaded can vary, and even their + relative order cannot be relied on. + + Otherwise Emacs assumes that text space precedes data space, + numerically. */ +/* #define VIRT_ADDR_VARIES */ + +/* Define NO_REMAP if memory segmentation makes it not work well + to change the boundary between the text section and data section + when Emacs is dumped. If you define this, the preloaded Lisp + code will not be sharable; but that's better than failing completely. */ +#define NO_REMAP + +/* Define C_ALLOCA if this machine does not support a true alloca + and the one written in C should be used instead. + Define HAVE_ALLOCA to say that the system provides a properly + working alloca function and it should be used. + Define neither one if an assembler-language alloca + in the file alloca.s should be used. */ +#ifdef __GNUC__ +# define alloca __builtin_alloca /* Use the gcc builtin alloca() ... */ +# define HAVE_ALLOCA /* ... and be sure that no other ones are tried out. */ +# undef C_ALLOCA +# define C_OPTIMIZE_SWITCH -O2 +#else /* not __GNUC__ */ +# undef HAVE_ALLOCA +# define C_ALLOCA /* Use the alloca() supplied in alloca.c. */ +# define STACK_DIRECTION -1 /* The stack grows towards lower addresses. */ +# define C_OPTIMIZE_SWITCH -O +#endif /* __GNUC__ */ + +/*#define C_DEBUG_SWITCH C_OPTIMIZE_SWITCH*/ /* Uncomment this to optimize */ + +/* XD88 SysV has PTYs. Not all usg3-5 systems do, so this is defined here. */ +#define HAVE_PTYS +#define SYSV_PTYS /* Requires */ + +/* we have job control */ +#undef NOMULTIPLEJOBS + +/* + * sockets are available + */ +#define HAVE_SOCKETS + +/* + * we have Berkeley style + */ +#define HAVE_TIMEVAL + +/* XD88 has select(). */ +#define HAVE_SELECT +#define BROKEN_FIONREAD /* is this needed ? */ + +/* + * don't use utimes, we ain't got one - use utime() instead + */ +#define USE_UTIME + +#define NO_SIOCTL_H + +/* We need HAVE_TCATTR to prevent Ctrl-Z from suspending Emacs before + suspend-emacs has been called. */ +/*#define HAVE_TCATTR*/ +/* TCATTR gives bogus baud rates. Use the following for OSPEED instead. */ +/*#define OSPEED(str) (cfgetospeed(&(str)))*/ +#define HAVE_TERMIOS +#undef HAVE_TERMIO + +#define BSTRING /* its in libc but not declared in any <*.h> file. */ +#define HAVE_TZSET +#define HAVE_SETSID +#define HAVE_RENAME + +#ifdef ghs /* Stands for "Green Hills Software", defined in /bin/cc */ +/* Only required for use with the Green Hills compiler: + -X18 Do not allocate programmer-defined local variables to a + register unless they are declared register. (From building + perl-4.036 Green Hills hints. Might be needed for setjmp.) + */ +#define C_SWITCH_MACHINE -X18 +/* We need /lib/default.ld so the bundled ld can read its link directives. */ +#define LD_SWITCH_SYSTEM /lib/default.ld +#endif /* ghs */ + +/* XD88 does not have the random() and srandom() calls in the base system, + but they exist in libX11.a. So, if you are building with X11 then you + will need to define HAVE_RANDOM. */ +#ifdef HAVE_X_WINDOWS +#define HAVE_RANDOM +#undef LIB_X11_LIB /* don't use the shared library default from usg5-3.h */ +#undef LIBX11_SYSTEM +#endif /* HAVE_X_WINDOWS */ + +/*#define SYSTEM_MALLOC*/ + +#ifndef UTEKV +#define UTEKV /* system specific symbol */ +#endif /* !UTEKV */ + +/* stuff to hopefully someday get dumping working ... */ +/*#define SECTION_ALIGNMENT 0x1ff*/ +/*#define SEGMENT_MASK 0xff*/ +/*#define A_TEXT_OFFSET(HDR) sizeof(HDR)*/