# HG changeset patch # User Jim Blandy # Date 674875135 0 # Node ID 3140f2aa89ae0d90ade00148c4b4d86b71593348 # Parent e7eb71cbf4788eff870086812007d44b646e33bf Initial revision diff -r e7eb71cbf478 -r 3140f2aa89ae src/xdisp.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/xdisp.c Wed May 22 01:18:55 1991 +0000 @@ -0,0 +1,2282 @@ +/* Display generation from window structure and buffer text. + Copyright (C) 1985, 1986, 1987, 1988 Free Software Foundation, Inc. + +This file is part of GNU Emacs. + +GNU Emacs is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 1, or (at your option) +any later version. + +GNU Emacs is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU Emacs; see the file COPYING. If not, write to +the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + + +#include "config.h" +#include +/*#include */ +#undef NULL +#include "lisp.h" +#include "screen.h" +#include "window.h" +#include "termchar.h" +#include "dispextern.h" +#include "buffer.h" +#include "indent.h" +#include "commands.h" +#include "macros.h" +#include "disptab.h" + +extern int interrupt_input; +extern int command_loop_level; + +/* Nonzero means print newline before next minibuffer message. */ + +int noninteractive_need_newline; + +#define min(a, b) ((a) < (b) ? (a) : (b)) +#define max(a, b) ((a) > (b) ? (a) : (b)) + +/* The buffer position of the first character appearing + entirely or partially on the current screen line. + Or zero, which disables the optimization for the current screen line. */ +static int this_line_bufpos; + +/* Number of characters past the end of this line, + including the terminating newline */ +static int this_line_endpos; + +/* The vertical position of this screen line. */ +static int this_line_vpos; + +/* Hpos value for start of display on this screen line. + Usually zero, but negative if first character really began + on previous line */ +static int this_line_start_hpos; + +/* Buffer that this_line variables are describing. */ +static struct buffer *this_line_buffer; + +/* Set by try_window_id to the vpos of first of any lines + scrolled on to the bottom of the screen. These lines should + not be included in any general scroll computation. */ +static int scroll_bottom_vpos; + +/* Value of echo_area_glyphs when it was last acted on. + If this is nonzero, there is a message on the screen + in the minibuffer and it should be erased as soon + as it is no longer requested to appear. */ +char *previous_echo_glyphs; + +/* Nonzero means truncate lines in all windows less wide than the screen */ +int truncate_partial_width_windows; + +Lisp_Object Vglobal_mode_string; + +/* Marker for where to display an arrow on top of the buffer text. */ +Lisp_Object Voverlay_arrow_position; + +/* String to display for the arrow. */ +Lisp_Object Voverlay_arrow_string; + +/* Values of those variables at last redisplay. */ +Lisp_Object last_arrow_position, last_arrow_string; + +/* Nonzero if overlay arrow has been displayed once in this window. */ +static int overlay_arrow_seen; + +/* If cursor motion alone moves point off screen, + Try scrolling this many lines up or down if that will bring it back. */ +int scroll_step; + +/* Nonzero if try_window_id has made blank lines at window bottom + since the last redisplay that paused */ +static int blank_end_of_window; + +/* Number of windows showing the buffer of the selected window. + keyboard.c refers to this. */ +int buffer_shared; + +/* display_text_line sets these to the screen position (origin 0) of point, + whether the window is selected or not. + Set one to -1 first to determine whether point was found afterwards. */ + +static int cursor_vpos; +static int cursor_hpos; + +int debug_end_pos; + +/* Nonzero means display mode line highlighted */ +int mode_line_inverse_video; + +static void echo_area_display (); +void mark_window_display_accurate (); +static void redisplay_windows (); +static void redisplay_window (); +static void try_window (); +static int try_window_id (); +static struct position *display_text_line (); +static void display_mode_line (); +static int display_mode_element (); +static char *fmodetrunc (); +static char *decode_mode_spec (); +static int display_string (); + +/* Prompt to display in front of the minibuffer contents */ +char *minibuf_prompt; + +/* Width in columns of current minibuffer prompt. */ +int minibuf_prompt_width; + +/* Message to display instead of minibuffer contents + This is what the functions error and message make, + and command echoing uses it as well. + It overrides the minibuf_prompt as well as the buffer. */ +char *echo_area_glyphs; + +/* true iff we should redraw the mode lines on the next redisplay */ +int update_mode_lines; + +/* Smallest number of characters before the gap + at any time since last redisplay that finished. + Valid for current buffer when try_window_id can be called. */ +int beg_unchanged; + +/* Smallest number of characters after the gap + at any time since last redisplay that finished. + Valid for current buffer when try_window_id can be called. */ +int end_unchanged; + +/* MODIFF as of last redisplay that finished; + if it matches MODIFF, beg_unchanged and end_unchanged + contain no useful information */ +int unchanged_modified; + +/* Nonzero if head_clip or tail_clip of current buffer has changed + since last redisplay that finished */ +int clip_changed; + +/* Nonzero if window sizes or contents have changed + since last redisplay that finished */ +int windows_or_buffers_changed; + + +#ifndef MULTI_SCREEN + +DEFUN ("redraw-display", Fredraw_display, Sredraw_display, 0, 0, "", + "Clear the screen and output again what is supposed to appear on it.") + () +{ + if (screen_height == 0) abort (); /* Some bug zeros some core */ + clear_screen (); + fflush (stdout); + clear_screen_records (); + if (screen_height == 0) abort (); /* Some bug zeros some core */ + windows_or_buffers_changed++; + /* Mark all windows as INaccurate, + so that every window will have its redisplay done. */ + mark_window_display_accurate (XWINDOW (minibuf_window)->prev, 0); + if (screen_height == 0) abort (); /* Some bug zeros some core */ + return Qnil; +} + +#endif /* not MULTI_SCREEN */ + +char *message_buf; + +/* dump an informative message to the minibuf */ +/* VARARGS 1 */ + +void +message (m, a1, a2, a3) + char *m; +{ + if (noninteractive) + { + if (noninteractive_need_newline) + putc ('\n', stderr); + noninteractive_need_newline = 0; + fprintf (stderr, m, a1, a2, a3); + fprintf (stderr, "\n"); + fflush (stderr); + } + else if (INTERACTIVE) + { +#ifdef NO_ARG_ARRAY + int a[3]; + a[0] = a1; + a[1] = a2; + a[2] = a3; + + doprnt (SCREEN_MESSAGE_BUF (selected_screen), + SCREEN_WIDTH (selected_screen), m, 0, 3, a); +#else + doprnt (SCREEN_MESSAGE_BUF (selected_screen), + SCREEN_WIDTH (selected_screen), m, 0, 3, &a1); +#endif /* NO_ARG_ARRAY */ + + echo_area_glyphs = SCREEN_MESSAGE_BUF (selected_screen); + do_pending_window_change (); + echo_area_display (); + update_screen (XSCREEN (XWINDOW (minibuf_window)->screen), 1, 1); + do_pending_window_change (); + } +} + +/* Specify m, a string, as a message in the minibuf. */ +void +message1 (m) + char *m; +{ + if (!NULL (Vwindow_system) && SCREEN_IS_TERMCAP (selected_screen)) + return; + + if (noninteractive) + { + if (noninteractive_need_newline) + putc ('\n', stderr); + noninteractive_need_newline = 0; + fprintf (stderr, "%s\n", m); + fflush (stderr); + } + else if (INTERACTIVE) + { + echo_area_glyphs = m; + do_pending_window_change (); + echo_area_display (); + update_screen (XSCREEN (XWINDOW (minibuf_window)->screen), 1, 1); + do_pending_window_change (); + } +} + +static void +echo_area_display () +{ + register int vpos; + SCREEN_PTR s; + +#ifdef MULTI_SCREEN + choose_minibuf_screen (); + s = XSCREEN (XWINDOW (minibuf_window)->screen); + + if (!s->visible) + return; +#endif + + if (screen_garbaged) + { + Fredraw_display (); + screen_garbaged = 0; + } + + if (echo_area_glyphs || minibuf_level == 0) + { + vpos = XFASTINT (XWINDOW (minibuf_window)->top); + get_display_line (s, vpos, 0); + display_string (XWINDOW (minibuf_window), vpos, + echo_area_glyphs ? echo_area_glyphs : "", + 0, 0, 0, SCREEN_WIDTH (s)); + + /* If desired cursor location is on this line, put it at end of text */ + if (SCREEN_CURSOR_Y (s) == vpos) + SCREEN_CURSOR_X (s) = s->desired_glyphs->used[vpos]; + } + else if (!EQ (minibuf_window, selected_window)) + windows_or_buffers_changed++; + + if (EQ (minibuf_window, selected_window)) + this_line_bufpos = 0; + + previous_echo_glyphs = echo_area_glyphs; +} + +/* Do a screen update, taking possible shortcuts into account. + This is the main external entry point for redisplay. + + If the last redisplay displayed an echo area message and that + message is no longer requested, we clear the echo area + or bring back the minibuffer if that is in use. + + Everyone would like to have a hook here to call eval, + but that cannot be done safely without a lot of changes elsewhere. + This can be called from signal handlers; with alarms set up; + or with synchronous processes running. + See the function `echo' in keyboard.c. + See Fcall_process; if you called it from here, it could be + entered recursively. */ + +void +redisplay () +{ + register struct window *w = XWINDOW (selected_window); + register int pause; + int must_finish = 0; + int all_windows; + register int tlbufpos, tlendpos; + struct position pos; + extern int input_pending; + + if (noninteractive) + return; + + /* Notice any pending interrupt request to change screen size. */ + do_pending_window_change (); + + if (screen_garbaged) + { + Fredraw_display (); + screen_garbaged = 0; + } + + if (echo_area_glyphs || previous_echo_glyphs) + { + echo_area_display (); + must_finish = 1; + } + + if (clip_changed || windows_or_buffers_changed) + update_mode_lines++; + + /* Detect case that we need to write a star in the mode line. */ + if (XFASTINT (w->last_modified) < MODIFF + && XFASTINT (w->last_modified) <= current_buffer->save_modified) + { + w->update_mode_line = Qt; + if (buffer_shared > 1) + update_mode_lines++; + } + + SCREEN_SCROLL_BOTTOM_VPOS (XSCREEN (w->screen)) = -1; + + all_windows = update_mode_lines || buffer_shared > 1; +#ifdef MULTI_SCREEN + all_windows |= (XTYPE (Vglobal_minibuffer_screen) == Lisp_Screen + && selected_screen != XSCREEN (Vglobal_minibuffer_screen)); +#endif /* MULTI_SCREEN */ + + /* If specs for an arrow have changed, do thorough redisplay + to ensure we remove any arrow that should no longer exist. */ + if (Voverlay_arrow_position != last_arrow_position + || Voverlay_arrow_string != last_arrow_string) + all_windows = 1, clip_changed = 1; + + tlbufpos = this_line_bufpos; + tlendpos = this_line_endpos; + if (!all_windows && tlbufpos > 0 && NULL (w->update_mode_line) + && SCREEN_VISIBLE_P (XSCREEN (w->screen)) + /* Make sure recorded data applies to current buffer, etc */ + && this_line_buffer == current_buffer + && current_buffer == XBUFFER (w->buffer) + && NULL (w->force_start) + /* Point must be on the line that we have info recorded about */ + && point >= tlbufpos + && point <= Z - tlendpos + /* All text outside that line, including its final newline, + must be unchanged */ + && (XFASTINT (w->last_modified) >= MODIFF + || (beg_unchanged >= tlbufpos - 1 + && GPT >= tlbufpos + && end_unchanged >= tlendpos + && Z - GPT >= tlendpos))) + { + if (tlbufpos > BEGV && FETCH_CHAR (tlbufpos - 1) != '\n' + && (tlbufpos == ZV + || FETCH_CHAR (tlbufpos) == '\n')) + /* Former continuation line has disappeared by becoming empty */ + goto cancel; + else if (XFASTINT (w->last_modified) < MODIFF + || MINI_WINDOW_P (w)) + { + cursor_vpos = -1; + overlay_arrow_seen = 0; + display_text_line (w, tlbufpos, this_line_vpos, this_line_start_hpos, + pos_tab_offset (w, tlbufpos)); + /* If line contains point, is not continued, + and ends at same distance from eob as before, we win */ + if (cursor_vpos >= 0 && this_line_bufpos + && this_line_endpos == tlendpos) + { + if (XFASTINT (w->width) != SCREEN_WIDTH (XSCREEN (WINDOW_SCREEN (w)))) + preserve_other_columns (w); + goto update; + } + else + goto cancel; + } + else if (point == XFASTINT (w->last_point)) + { + if (!must_finish) + { + do_pending_window_change (); + return; + } + goto update; + } + else + { + pos = *compute_motion (tlbufpos, 0, + XINT (w->hscroll) ? 1 - XINT (w->hscroll) : 0, + point, 2, - (1 << (SHORTBITS - 1)), + XFASTINT (w->width) - 1 + - (XFASTINT (w->width) + XFASTINT (w->left) + != SCREEN_WIDTH (selected_screen)), + XINT (w->hscroll), 0); + if (pos.vpos < 1) + { + SCREEN_CURSOR_X (selected_screen) + = XFASTINT (w->left) + max (pos.hpos, 0); + SCREEN_CURSOR_Y (selected_screen) = this_line_vpos; + goto update; + } + else + goto cancel; + } + cancel: + /* Text changed drastically or point moved off of line */ + cancel_line (this_line_vpos, selected_screen); + } + + this_line_bufpos = 0; + all_windows |= buffer_shared > 1; + + if (all_windows) + { +#ifdef MULTI_SCREEN + Lisp_Object tail; + + /* Recompute # windows showing selected buffer. + This will be increment each time such a window is displayed. */ + buffer_shared = 0; + + for (tail = Vscreen_list; CONSP (tail); tail = XCONS (tail)->cdr) + { + SCREEN_PTR s; + + if (XTYPE (XCONS (tail)->car) != Lisp_Screen) + continue; + + s = XSCREEN (XCONS (tail)->car); + if (s->visible) + { + + /* Clear the echo area on screens where the minibuffer isn't. */ + if (s != XSCREEN (XWINDOW (minibuf_window)->screen) + /* But only screens that have minibuffers. */ + && s->has_minibuffer) + { + int vpos = XFASTINT (XWINDOW (s->minibuffer_window)->top); + register struct screen_glyphs *line; + + get_display_line (s, vpos, 0); + display_string (XWINDOW (s->minibuffer_window), vpos, "", + 0, 0, 0, s->width); + } + + /* Redraw its windows. */ + redisplay_windows (SCREEN_ROOT_WINDOW (s)); + } + } +#else + redisplay_windows (SCREEN_ROOT_WINDOW (s)); +#endif /* not MULTI_SCREEN */ + } + else if (SCREEN_VISIBLE_P (selected_screen)) + { + redisplay_window (selected_window, 1); + if (XFASTINT (w->width) != SCREEN_WIDTH (selected_screen)) + preserve_other_columns (w); + } + +update: + /* Prevent various kinds of signals during display update. + stdio is not robust about handling signals, + which can cause an apparent I/O error. */ + if (interrupt_input) + unrequest_sigio (); + stop_polling (); + +#ifdef MULTI_SCREEN + if (all_windows) + { + Lisp_Object tail; + + pause = 0; + + for (tail = Vscreen_list; CONSP (tail); tail = XCONS (tail)->cdr) + { + SCREEN_PTR s; + + if (XTYPE (XCONS (tail)->car) != Lisp_Screen) + continue; + + s = XSCREEN (XCONS (tail)->car); + if (s->visible) + { + pause |= update_screen (s, 0, 0, SCREEN_SCROLL_BOTTOM_VPOS (s)); + if (!pause) + mark_window_display_accurate (s->root_window, 1); + } + } + } + else +#endif /* MULTI_SCREEN */ + if (SCREEN_VISIBLE_P (selected_screen)) + pause = update_screen (selected_screen, 0, 0); + + /* If screen does not match, prevent doing single-line-update next time. + Also, don't forget to check every line to update the arrow. */ + if (pause) + { + this_line_bufpos = 0; + if (!NULL (last_arrow_position)) + { + last_arrow_position = Qt; + last_arrow_string = Qt; + } + /* If we pause after scrolling, some lines in current_screen + may be null, so preserve_other_columns won't be able to + preserve all the vertical-bar separators. So, avoid using it + in that case. */ + if (XFASTINT (w->width) != SCREEN_WIDTH (selected_screen)) + update_mode_lines = 1; + } + + /* Now text on screen agrees with windows, so + put info into the windows for partial redisplay to follow */ + + if (!pause) + { + register struct buffer *b = XBUFFER (w->buffer); + + blank_end_of_window = 0; + clip_changed = 0; + unchanged_modified = BUF_MODIFF (b); + beg_unchanged = BUF_GPT (b) - BUF_BEG (b); + end_unchanged = BUF_Z (b) - BUF_GPT (b); + + XFASTINT (w->last_point) = BUF_PT (b); + XFASTINT (w->last_point_x) = SCREEN_CURSOR_X (selected_screen); + XFASTINT (w->last_point_y) = SCREEN_CURSOR_Y (selected_screen); + + if (all_windows) + mark_window_display_accurate (XWINDOW (minibuf_window)->prev, 1); + else + { + w->update_mode_line = Qnil; + XFASTINT (w->last_modified) = BUF_MODIFF (b); + w->window_end_valid = Qt; + last_arrow_position = Voverlay_arrow_position; + last_arrow_string = Voverlay_arrow_string; + } + update_mode_lines = 0; + windows_or_buffers_changed = 0; + } + + /* Start SIGIO interrupts coming again. + Having them off during the code above + makes it less likely one will discard output, + but not impossible, since there might be stuff + in the system buffer here. + But it is much hairier to try to do anything about that. */ + + if (interrupt_input) + request_sigio (); + start_polling (); + + /* Change screen size now if a change is pending. */ + do_pending_window_change (); +} + +/* Redisplay, but leave alone any recent echo area message + unless another message has been requested in its place. + + This is useful in situations where you need to redisplay but no + user action has occurred, making it inappropriate for the message + area to be cleared. See tracking_off and + wait_reading_process_input for examples of these situations. */ + +redisplay_preserve_echo_area () +{ + if (echo_area_glyphs == 0 && previous_echo_glyphs != 0) + { + echo_area_glyphs = previous_echo_glyphs; + redisplay (); + echo_area_glyphs = 0; + } + else + redisplay (); +} + +void +mark_window_display_accurate (window, flag) + Lisp_Object window; + int flag; +{ + register struct window *w; + + for (;!NULL (window); window = w->next) + { + w = XWINDOW (window); + + if (!NULL (w->buffer)) + XFASTINT (w->last_modified) + = !flag ? 0 + : XBUFFER (w->buffer) == current_buffer + ? MODIFF : BUF_MODIFF (XBUFFER (w->buffer)); + w->window_end_valid = Qt; + w->update_mode_line = Qnil; + + if (!NULL (w->vchild)) + mark_window_display_accurate (w->vchild, flag); + if (!NULL (w->hchild)) + mark_window_display_accurate (w->hchild, flag); + } + + if (flag) + { + last_arrow_position = Voverlay_arrow_position; + last_arrow_string = Voverlay_arrow_string; + } + else + { + /* t is unequal to any useful value of Voverlay_arrow_... */ + last_arrow_position = Qt; + last_arrow_string = Qt; + } +} + +int do_id = 1; + +static void +redisplay_windows (window) + Lisp_Object window; +{ + for (; !NULL (window); window = XWINDOW (window)->next) + redisplay_window (window, 0); +} + +static void +redisplay_window (window, just_this_one) + Lisp_Object window; + int just_this_one; +{ + register struct window *w = XWINDOW (window); + SCREEN_PTR s = XSCREEN (w->screen); + int height; + register int lpoint = point; + struct buffer *old = current_buffer; + register int width = XFASTINT (w->width) - 1 + - (XFASTINT (w->width) + XFASTINT (w->left) + != SCREEN_WIDTH (XSCREEN (WINDOW_SCREEN (w)))); + register int startp; + register int hscroll = XINT (w->hscroll); + struct position pos; + int opoint; + int tem; + int window_needs_modeline; + + if (SCREEN_HEIGHT (s) == 0) abort (); /* Some bug zeros some core */ + + /* If this is a combination window, do its children; that's all. */ + + if (!NULL (w->vchild)) + { + redisplay_windows (w->vchild); + return; + } + if (!NULL (w->hchild)) + { + redisplay_windows (w->hchild); + return; + } + if (NULL (w->buffer)) + abort (); + + if (update_mode_lines) + w->update_mode_line = Qt; + + /* Otherwise set up data on this window; select its buffer and point value */ + + height = window_internal_height (w); + + if (MINI_WINDOW_P (w) + && (echo_area_glyphs + /* Don't display minibuffers except minibuf_window. */ + || w != XWINDOW (minibuf_window))) + return; + + current_buffer = XBUFFER (w->buffer); + opoint = point; + + /* Count number of windows showing the selected buffer. */ + + if (!just_this_one + && current_buffer == XBUFFER (XWINDOW (selected_window)->buffer)) + buffer_shared++; + + /* POINT refers normally to the selected window. + For any other window, set up appropriate value. */ + + if (!EQ (window, selected_window)) + { + SET_PT (marker_position (w->pointm)); + if (point < BEGV) + { + point = BEGV; + Fset_marker (w->pointm, make_number (point), Qnil); + } + else if (point > (ZV - 1)) + { + point = ZV; + Fset_marker (w->pointm, make_number (point), Qnil); + } + } + + /* If window-start is screwed up, choose a new one. */ + + if (XMARKER (w->start)->buffer != current_buffer) + goto recenter; + + startp = marker_position (w->start); + + /* Handle case where place to start displaying has been specified */ + + if (!NULL (w->force_start)) + { + w->update_mode_line = Qt; + w->force_start = Qnil; + XFASTINT (w->last_modified) = 0; + try_window (window, startp); + if (cursor_vpos < 0) + { + /* If point does not appear, move point so it does appear */ + pos = *compute_motion (startp, 0, + ((EQ (window, minibuf_window) && startp == 1) + ? minibuf_prompt_width : 0) + + + (hscroll ? 1 - hscroll : 0), + ZV, height / 2, + - (1 << (SHORTBITS - 1)), + width, hscroll, pos_tab_offset (w, startp)); + SET_PT (pos.bufpos); + if (w != XWINDOW (SCREEN_SELECTED_WINDOW (s))) + Fset_marker (w->pointm, make_number (point), Qnil); + else + { + lpoint = point; + SCREEN_CURSOR_X (s) = max (0, pos.hpos) + XFASTINT (w->left); + SCREEN_CURSOR_Y (s) = pos.vpos + XFASTINT (w->top); + } + } + goto done; + } + + /* Handle case where text has not changed, only point, + and it has not moved off the screen */ + + /* This code is not used for minibuffer for the sake of + the case of redisplaying to replace an echo area message; + since in that case the minibuffer contents per se are usually unchanged. + This code is of no real use in the minibuffer since + the handling of this_line_bufpos, etc., + in redisplay handles the same cases. */ + + if (XFASTINT (w->last_modified) >= MODIFF + && point >= startp && !clip_changed + && (just_this_one || XFASTINT (w->width) == SCREEN_WIDTH (s)) + && !EQ (window, minibuf_window)) + { + pos = *compute_motion (startp, 0, (hscroll ? 1 - hscroll : 0), + point, height + 1, 10000, width, hscroll, + pos_tab_offset (w, startp)); + + if (pos.vpos < height) + { + /* Ok, point is still on screen */ + if (w == XWINDOW (SCREEN_SELECTED_WINDOW (s))) + { + /* These variables are supposed to be origin 1 */ + SCREEN_CURSOR_X (s) = max (0, pos.hpos) + XFASTINT (w->left); + SCREEN_CURSOR_Y (s) = pos.vpos + XFASTINT (w->top); + } + /* This doesn't do the trick, because if a window to the right of + this one must be redisplayed, this does nothing because there + is nothing in DesiredScreen yet, and then the other window is + redisplayed, making likes that are empty in this window's columns. + if (XFASTINT (w->width) != SCREEN_WIDTH (s)) + preserve_my_columns (w); + */ + goto done; + } + /* Don't bother trying redisplay with same start; + we already know it will lose */ + } + /* If current starting point was originally the beginning of a line + but no longer is, find a new starting point. */ + else if (!NULL (w->start_at_line_beg) + && !(startp == BEGV + || FETCH_CHAR (startp - 1) == '\n')) + { + goto recenter; + } + else if (just_this_one && !MINI_WINDOW_P (w) + && point >= startp + && XFASTINT (w->last_modified) + && ! EQ (w->window_end_valid, Qnil) + && do_id && !clip_changed + && !blank_end_of_window + && XFASTINT (w->width) == SCREEN_WIDTH (s) + && EQ (last_arrow_position, Voverlay_arrow_position) + && EQ (last_arrow_string, Voverlay_arrow_string) + && (tem = try_window_id (SCREEN_SELECTED_WINDOW (s))) + && tem != -2) + { + /* tem > 0 means success. tem == -1 means choose new start. + tem == -2 means try again with same start, + and nothing but whitespace follows the changed stuff. + tem == 0 means try again with same start. */ + if (tem > 0) + goto done; + } + else if (startp >= BEGV && startp <= ZV + /* Avoid starting display at end of buffer! */ + && (startp <= ZV || startp == BEGV + || (XFASTINT (w->last_modified) >= MODIFF))) + { + /* Try to redisplay starting at same place as before */ + /* If point has not moved off screen, accept the results */ + try_window (window, startp); + if (cursor_vpos >= 0) + goto done; + else + cancel_my_columns (w); + } + + XFASTINT (w->last_modified) = 0; + w->update_mode_line = Qt; + + /* Try to scroll by specified few lines */ + + if (scroll_step && !clip_changed) + { + if (point > startp) + { + pos = *vmotion (Z - XFASTINT (w->window_end_pos), + scroll_step, width, hscroll, window); + if (pos.vpos >= height) + goto scroll_fail; + } + + pos = *vmotion (startp, point < startp ? - scroll_step : scroll_step, + width, hscroll, window); + + if (point >= pos.bufpos) + { + try_window (window, pos.bufpos); + if (cursor_vpos >= 0) + goto done; + else + cancel_my_columns (w); + } + scroll_fail: ; + } + + /* Finally, just choose place to start which centers point */ + +recenter: + pos = *vmotion (point, - height / 2, width, hscroll, window); + try_window (window, pos.bufpos); + + startp = marker_position (w->start); + w->start_at_line_beg = + (startp == BEGV || FETCH_CHAR (startp - 1) == '\n') ? Qt : Qnil; + +done: + /* If window not full width, must redo its mode line + if the window to its side is being redone */ + if ((!NULL (w->update_mode_line) + || (!just_this_one && width < SCREEN_WIDTH (s) - 1)) + && height != XFASTINT (w->height)) + display_mode_line (w); + + SET_PT (opoint); + current_buffer = old; + SET_PT (lpoint); +} + +/* Do full redisplay on one window, starting at position `pos'. */ + +static void +try_window (window, pos) + Lisp_Object window; + register int pos; +{ + register struct window *w = XWINDOW (window); + register int height = window_internal_height (w); + register int vpos = XFASTINT (w->top); + register int last_text_vpos = vpos; + int tab_offset = pos_tab_offset (w, pos); + SCREEN_PTR s = XSCREEN (w->screen); + int width = XFASTINT (w->width) - 1 + - (XFASTINT (w->width) + XFASTINT (w->left) != SCREEN_WIDTH (s)); + struct position val; + + Fset_marker (w->start, make_number (pos), Qnil); + cursor_vpos = -1; + overlay_arrow_seen = 0; + val.hpos = XINT (w->hscroll) ? 1 - XINT (w->hscroll) : 0; + + while (--height >= 0) + { + val = *display_text_line (w, pos, vpos, val.hpos, tab_offset); + tab_offset += width; + if (val.vpos) tab_offset = 0; + vpos++; + if (pos != val.bufpos) + last_text_vpos + /* Next line, unless prev line ended in end of buffer with no cr */ + = vpos - (val.vpos && FETCH_CHAR (val.bufpos - 1) != '\n'); + pos = val.bufpos; + } + + /* If last line is continued in middle of character, + include the split character in the text considered on the screen */ + if (val.hpos < (XINT (w->hscroll) ? 1 - XINT (w->hscroll) : 0)) + pos++; + + /* If bottom just moved off end of screen, change mode line percentage. */ + if (XFASTINT (w->window_end_pos) == 0 + && Z != pos) + w->update_mode_line = Qt; + + /* Say where last char on screen will be, once redisplay is finished. */ + XFASTINT (w->window_end_pos) = Z - pos; + XFASTINT (w->window_end_vpos) = last_text_vpos - XFASTINT (w->top); + /* But that is not valid info until redisplay finishes. */ + w->window_end_valid = Qnil; +} + +/* Try to redisplay when buffer is modified locally, + computing insert/delete line to preserve text outside + the bounds of the changes. + Return 1 if successful, 0 if if cannot tell what to do, + or -1 to tell caller to find a new window start, + or -2 to tell caller to do normal redisplay with same window start. */ + +static int +try_window_id (window) + Lisp_Object window; +{ + int pos; + register struct window *w = XWINDOW (window); + register int height = window_internal_height (w); + SCREEN_PTR s = XSCREEN (w->screen); + int top = XFASTINT (w->top); + int start = marker_position (w->start); + int width = XFASTINT (w->width) - 1 + - (XFASTINT (w->width) + XFASTINT (w->left) != SCREEN_WIDTH (s)); + int hscroll = XINT (w->hscroll); + int lmargin = hscroll > 0 ? 1 - hscroll : 0; + register int vpos; + register int i, tem; + int last_text_vpos = 0; + int stop_vpos; + + struct position val, bp, ep, xp, pp; + int scroll_amount = 0; + int delta; + int tab_offset, epto; + + if (GPT - BEG < beg_unchanged) + beg_unchanged = GPT - BEG; + if (Z - GPT < end_unchanged) + end_unchanged = Z - GPT; + + if (beg_unchanged + 1 < start) + return 0; /* Give up if changes go above top of window */ + + /* Find position before which nothing is changed. */ + bp = *compute_motion (start, 0, lmargin, + beg_unchanged + 1, 10000, 10000, width, hscroll, + pos_tab_offset (w, start)); + if (bp.vpos >= height) + return point < bp.bufpos && !bp.contin; + + vpos = bp.vpos; + + /* Find beginning of that screen line. Must display from there. */ + bp = *vmotion (bp.bufpos, 0, width, hscroll, window); + + pos = bp.bufpos; + val.hpos = lmargin; + if (pos < start) + return -1; + + /* If about to start displaying at the beginning of a continuation line, + really start with previous screen line, in case it was not + continued when last redisplayed */ + if (bp.contin && bp.bufpos - 1 == beg_unchanged && vpos > 0) + { + bp = *vmotion (bp.bufpos, -1, width, hscroll, window); + --vpos; + pos = bp.bufpos; + } + + if (bp.contin && bp.hpos != lmargin) + { + val.hpos = bp.prevhpos - width + lmargin; + pos--; + } + + bp.vpos = vpos; + + /* Find first visible newline after which no more is changed. */ + tem = find_next_newline (Z - max (end_unchanged, Z - ZV), 1); + if (XTYPE (current_buffer->selective_display) == Lisp_Int + && XINT (current_buffer->selective_display) > 0) + while (tem < ZV - 1 + && (position_indentation (tem) + >= XINT (current_buffer->selective_display))) + tem = find_next_newline (tem, 1); + + /* Compute the cursor position after that newline. */ + ep = *compute_motion (pos, vpos, val.hpos, tem, + height, - (1 << (SHORTBITS - 1)), + width, hscroll, pos_tab_offset (w, bp.bufpos)); + + /* If changes reach past the text available on the screen, + just display rest of screen. */ + if (ep.bufpos > Z - XFASTINT (w->window_end_pos)) + stop_vpos = height; + else + stop_vpos = ep.vpos; + + /* If no newline before ep, the line ep is on includes some changes + that must be displayed. Make sure we don't stop before it. */ + /* Also, if changes reach all the way until ep.bufpos, + it is possible that something was deleted after the + newline before it, so the following line must be redrawn. */ + if (stop_vpos == ep.vpos + && (ep.bufpos == BEGV + || FETCH_CHAR (ep.bufpos - 1) != '\n' + || ep.bufpos == Z - end_unchanged)) + stop_vpos = ep.vpos + 1; + + cursor_vpos = -1; + overlay_arrow_seen = 0; + + /* If changes do not reach to bottom of window, + figure out how much to scroll the rest of the window */ + if (stop_vpos < height) + { + /* Now determine how far up or down the rest of the window has moved */ + epto = pos_tab_offset (w, ep.bufpos); + xp = *compute_motion (ep.bufpos, ep.vpos, ep.hpos, + Z - XFASTINT (w->window_end_pos), + 10000, 0, width, hscroll, epto); + scroll_amount = xp.vpos - XFASTINT (w->window_end_vpos); + + /* Is everything on screen below the changes whitespace? + If so, no scrolling is really necessary. */ + for (i = ep.bufpos; i < xp.bufpos; i++) + { + tem = FETCH_CHAR (i); + if (tem != ' ' && tem != '\n' && tem != '\t') + break; + } + if (i == xp.bufpos) + return -2; + + XFASTINT (w->window_end_vpos) += scroll_amount; + + /* Before doing any scrolling, verify that point will be on screen. */ + if (point > ep.bufpos && !(point <= xp.bufpos && xp.bufpos < height)) + { + if (point <= xp.bufpos) + { + pp = *compute_motion (ep.bufpos, ep.vpos, ep.hpos, + point, height, - (1 << (SHORTBITS - 1)), + width, hscroll, epto); + } + else + { + pp = *compute_motion (xp.bufpos, xp.vpos, xp.hpos, + point, height, - (1 << (SHORTBITS - 1)), + width, hscroll, pos_tab_offset (w, xp.bufpos)); + } + if (pp.bufpos < point || pp.vpos == height) + return 0; + cursor_vpos = pp.vpos + top; + cursor_hpos = pp.hpos + XFASTINT (w->left); + } + + if (stop_vpos - scroll_amount >= height + || ep.bufpos == xp.bufpos) + { + if (scroll_amount < 0) + stop_vpos -= scroll_amount; + scroll_amount = 0; + /* In this path, we have altered window_end_vpos + and not left it negative. + We must make sure that, in case display is preempted + before the screen changes to reflect what we do here, + further updates will not come to try_window_id + and assume the screen and window_end_vpos match. */ + blank_end_of_window = 1; + } + else if (!scroll_amount) + {} + else if (bp.bufpos == Z - end_unchanged) + { + /* If reprinting everything is nearly as fast as scrolling, + don't bother scrolling. Can happen if lines are short. */ + if (scroll_cost (s, bp.vpos + top - scroll_amount, + top + height - max (0, scroll_amount), + scroll_amount) + > xp.bufpos - bp.bufpos - 20) + /* Return "try normal display with same window-start." + Too bad we can't prevent further scroll-thinking. */ + return -2; + /* If pure deletion, scroll up as many lines as possible. + In common case of killing a line, this can save the + following line from being overwritten by scrolling + and therefore having to be redrawn. */ + tem = scroll_screen_lines (s, bp.vpos + top - scroll_amount, + top + height - max (0, scroll_amount), + scroll_amount); + if (!tem) stop_vpos = height; + } + else if (scroll_amount) + { + /* If reprinting everything is nearly as fast as scrolling, + don't bother scrolling. Can happen if lines are short. */ + /* Note that if scroll_amount > 0, xp.bufpos - bp.bufpos is an + overestimate of cost of reprinting, since xp.bufpos + would end up below the bottom of the window. */ + if (scroll_cost (s, ep.vpos + top - scroll_amount, + top + height - max (0, scroll_amount), + scroll_amount) + > xp.bufpos - ep.bufpos - 20) + /* Return "try normal display with same window-start." + Too bad we can't prevent further scroll-thinking. */ + return -2; + tem = scroll_screen_lines (s, ep.vpos + top - scroll_amount, + top + height - max (0, scroll_amount), + scroll_amount); + if (!tem) stop_vpos = height; + } + } + + /* In any case, do not display past bottom of window */ + if (stop_vpos >= height) + { + stop_vpos = height; + scroll_amount = 0; + } + + /* Handle case where pos is before w->start -- + can happen if part of line had been clipped and is not clipped now */ + if (vpos == 0 && pos < marker_position (w->start)) + Fset_marker (w->start, make_number (pos), Qnil); + + /* Redisplay the lines where the text was changed */ + last_text_vpos = vpos; + tab_offset = pos_tab_offset (w, pos); + /* If we are starting display in mid-character, correct tab_offset + to account for passing the line that that character really starts in. */ + if (val.hpos < lmargin) + tab_offset += width; + while (vpos < stop_vpos) + { + val = *display_text_line (w, pos, top + vpos++, val.hpos, tab_offset); + tab_offset += width; + if (val.vpos) tab_offset = 0; + if (pos != val.bufpos) + last_text_vpos + /* Next line, unless prev line ended in end of buffer with no cr */ + = vpos - (val.vpos && FETCH_CHAR (val.bufpos - 1) != '\n'); + pos = val.bufpos; + } + + /* There are two cases: + 1) we have displayed down to the bottom of the window + 2) we have scrolled lines below stop_vpos by scroll_amount */ + + if (vpos == height) + { + /* If last line is continued in middle of character, + include the split character in the text considered on the screen */ + if (val.hpos < lmargin) + val.bufpos++; + XFASTINT (w->window_end_vpos) = last_text_vpos; + XFASTINT (w->window_end_pos) = Z - val.bufpos; + } + + /* If scrolling made blank lines at window bottom, + redisplay to fill those lines */ + if (scroll_amount < 0) + { + /* Don't consider these lines for general-purpose scrolling. + That will save time in the scrolling computation. */ + SCREEN_SCROLL_BOTTOM_VPOS (s) = xp.vpos; + vpos = xp.vpos; + pos = xp.bufpos; + val.hpos = lmargin; + if (pos == ZV) + vpos = height + scroll_amount; + else if (xp.contin && xp.hpos != lmargin) + { + val.hpos = xp.prevhpos - width + lmargin; + pos--; + } + + blank_end_of_window = 1; + tab_offset = pos_tab_offset (w, pos); + /* If we are starting display in mid-character, correct tab_offset + to account for passing the line that that character starts in. */ + if (val.hpos < lmargin) + tab_offset += width; + + while (vpos < height) + { + val = *display_text_line (w, pos, top + vpos++, val.hpos, tab_offset); + tab_offset += width; + if (val.vpos) tab_offset = 0; + pos = val.bufpos; + } + + /* Here is a case where display_text_line sets cursor_vpos wrong. + Make it be fixed up, below. */ + if (xp.bufpos == ZV + && xp.bufpos == point) + cursor_vpos = -1; + } + + /* If bottom just moved off end of screen, change mode line percentage. */ + if (XFASTINT (w->window_end_pos) == 0 + && Z != val.bufpos) + w->update_mode_line = Qt; + + /* Attempt to adjust end-of-text positions to new bottom line */ + if (scroll_amount) + { + delta = height - xp.vpos; + if (delta < 0 + || (delta > 0 && xp.bufpos <= ZV) + || (delta == 0 && xp.hpos)) + { + val = *vmotion (Z - XFASTINT (w->window_end_pos), + delta, width, hscroll, window); + XFASTINT (w->window_end_pos) = Z - val.bufpos; + XFASTINT (w->window_end_vpos) += val.vpos; + } + } + + w->window_end_valid = Qnil; + + /* If point was not in a line that was displayed, find it */ + if (cursor_vpos < 0) + { + val = *compute_motion (start, 0, lmargin, point, 10000, 10000, + width, hscroll, pos_tab_offset (w, start)); + /* Admit failure if point is off screen now */ + if (val.vpos >= height) + { + for (vpos = 0; vpos < height; vpos++) + cancel_line (vpos + top, s); + return 0; + } + cursor_vpos = val.vpos + top; + cursor_hpos = val.hpos + XFASTINT (w->left); + } + + SCREEN_CURSOR_X (s) = max (0, cursor_hpos); + SCREEN_CURSOR_Y (s) = cursor_vpos; + + if (debug_end_pos) + { + val = *compute_motion (start, 0, lmargin, ZV, + height, - (1 << (SHORTBITS - 1)), + width, hscroll, pos_tab_offset (w, start)); + if (val.vpos != XFASTINT (w->window_end_vpos)) + abort (); + if (XFASTINT (w->window_end_pos) + != Z - val.bufpos) + abort (); + } + + return 1; +} + +/* Copy part of the contents of the string FROM into a glyph-vector at S. + But don't actually copy the parts that would come in before T. + Value is T, advanced past the copied data. + + Characters in FROM are grouped into units of `sizeof GLYPH' chars; + any extra chars at the end of FROM are ignored. */ + +GLYPH * +copy_rope (t, s, from) + register GLYPH *t; /* Copy to here. */ + register GLYPH *s; /* Starting point. */ + Lisp_Object from; /* Data to copy; known to be a string. */ +{ + register int n = XSTRING (from)->size / sizeof (GLYPH); + register GLYPH *f = (GLYPH *) XSTRING (from)->data; + + while (n--) + { + if (t >= s) *t = *f; + ++t; + ++f; + } + return t; +} + +/* Display one line of window w, starting at position START in W's buffer. + Display starting at horizontal position HPOS, which is normally zero + or negative. A negative value causes output up to hpos = 0 to be discarded. + This is done for negative hscroll, or when this is a continuation line + and the continuation occurred in the middle of a multi-column character. + + TABOFFSET is an offset for ostensible hpos, used in tab stop calculations. + + Display on position VPOS on the screen. (origin 0). + + Returns a STRUCT POSITION giving character to start next line with + and where to display it, including a zero or negative hpos. + The vpos field is not really a vpos; it is 1 unless the line is continued */ + +struct position val_display_text_line; + +static struct position * +display_text_line (w, start, vpos, hpos, taboffset) + struct window *w; + int start; + int vpos; + int hpos; + int taboffset; +{ + register int pos = start; + register int c; + register GLYPH *p1; + int end; + register int pause; + register unsigned char *p; + GLYPH *endp; + register GLYPH *startp; + register GLYPH *p1prev; + SCREEN_PTR s = XSCREEN (w->screen); + int tab_width = XINT (current_buffer->tab_width); + int ctl_arrow = !NULL (current_buffer->ctl_arrow); + int width = XFASTINT (w->width) - 1 + - (XFASTINT (w->width) + XFASTINT (w->left) != SCREEN_WIDTH (s)); + struct position val; + int lastpos; + int invis; + int hscroll = XINT (w->hscroll); + int truncate = hscroll + || (truncate_partial_width_windows + && XFASTINT (w->width) < SCREEN_WIDTH (s)) + || !NULL (current_buffer->truncate_lines); + int selective + = XTYPE (current_buffer->selective_display) == Lisp_Int + ? XINT (current_buffer->selective_display) + : !NULL (current_buffer->selective_display) ? -1 : 0; +#ifndef old + int selective_e = selective && !NULL (current_buffer->selective_display_ellipses); +#endif + register struct screen_glyphs *desired_glyphs = SCREEN_DESIRED_GLYPHS (s); + register struct Lisp_Vector *dp = window_display_table (w); + int selective_rlen + = (selective && dp && XTYPE (DISP_INVIS_ROPE (dp)) == Lisp_String + ? XSTRING (DISP_INVIS_ROPE (dp))->size / sizeof (GLYPH) : 0); + GLYPH truncator = (dp == 0 || XTYPE (DISP_TRUNC_GLYPH (dp)) != Lisp_Int + ? '$' : XINT (DISP_TRUNC_GLYPH (dp))); + GLYPH continuer = (dp == 0 || XTYPE (DISP_CONTINUE_GLYPH (dp)) != Lisp_Int + ? '\\' : XINT (DISP_CONTINUE_GLYPH (dp))); + + hpos += XFASTINT (w->left); + get_display_line (s, vpos, XFASTINT (w->left)); + if (tab_width <= 0 || tab_width > 20) tab_width = 8; + + if (MINI_WINDOW_P (w) && start == 1 + && vpos == XFASTINT (w->top)) + { + if (minibuf_prompt) + hpos = display_string (w, vpos, minibuf_prompt, hpos, + (!truncate ? continuer : truncator), + -1, -1); + minibuf_prompt_width = hpos; + } + + desired_glyphs->bufp[vpos] = pos; + p1 = desired_glyphs->glyphs[vpos] + hpos; + end = ZV; + startp = desired_glyphs->glyphs[vpos] + XFASTINT (w->left); + endp = startp + width; + + /* Loop generating characters. + Stop at end of buffer, before newline, + or if reach or pass continuation column. */ + + pause = pos; + while (p1 < endp) + { + p1prev = p1; + if (pos == pause) + { + if (pos == end) + break; + if (pos == point && cursor_vpos < 0) + { + cursor_vpos = vpos; + cursor_hpos = p1 - startp; + } + + pause = end; + if (pos < point && point < pause) + pause = point; + if (pos < GPT && GPT < pause) + pause = GPT; + + p = &FETCH_CHAR (pos); + } + c = *p++; + if (c >= 040 && c < 0177 + && (dp == 0 || XTYPE (DISP_CHAR_ROPE (dp, c)) != Lisp_String)) + { + if (p1 >= startp) + *p1 = c; + p1++; + } + else if (c == '\n') + { + invis = 0; + while (pos < end + && selective > 0 + && position_indentation (pos + 1) >= selective) + { + invis = 1; + pos = find_next_newline (pos + 1, 1); + if (FETCH_CHAR (pos - 1) == '\n') + pos--; + } + if (invis && selective_rlen > 0 && p1 >= startp) + { + p1 += selective_rlen; + if (p1 - startp > width) + p1 = endp; + bcopy (XSTRING (DISP_INVIS_ROPE (dp))->data, p1prev, + (p1 - p1prev) * sizeof (GLYPH)); + } + break; + } + else if (c == '\t') + { + do + { + if (p1 >= startp && p1 < endp) + *p1 = SPACEGLYPH; + p1++; + } + while ((p1 - startp + taboffset + hscroll - (hscroll > 0)) + % tab_width); + } + else if (c == Ctl('M') && selective == -1) + { + pos = find_next_newline (pos, 1); + if (FETCH_CHAR (pos - 1) == '\n') + pos--; + if (selective_rlen > 0) + { + p1 += selective_rlen; + if (p1 - startp > width) + p1 = endp; + bcopy (XSTRING (DISP_INVIS_ROPE (dp))->data, p1prev, + (p1 - p1prev) * sizeof (GLYPH)); + } + break; + } + else if (dp != 0 && XTYPE (DISP_CHAR_ROPE (dp, c)) == Lisp_String) + { + p1 = copy_rope (p1, startp, DISP_CHAR_ROPE (dp, c)); + } + else if (c < 0200 && ctl_arrow) + { + if (p1 >= startp) + *p1 = (dp && XTYPE (DISP_CTRL_GLYPH (dp)) == Lisp_Int + ? XINT (DISP_CTRL_GLYPH (dp)) : '^'); + p1++; + if (p1 >= startp) + *p1 = c ^ 0100; + p1++; + } + else + { + if (p1 >= startp) + *p1 = (dp && XTYPE (DISP_ESCAPE_GLYPH (dp)) == Lisp_Int + ? XINT (DISP_ESCAPE_GLYPH (dp)) : '\\'); + p1++; + if (p1 >= startp) + *p1 = (c >> 6) + '0'; + p1++; + if (p1 >= startp) + *p1 = (7 & (c >> 3)) + '0'; + p1++; + if (p1 >= startp) + *p1 = (7 & c) + '0'; + p1++; + } + pos++; + } + + val.hpos = - XINT (w->hscroll); + if (val.hpos) + val.hpos++; + + val.vpos = 1; + + lastpos = pos; + + /* Handle continuation in middle of a character */ + /* by backing up over it */ + if (p1 > endp) + { + /* Start the next line with that same character */ + pos--; + /* but at a negative hpos, to skip the columns output on this line. */ + val.hpos += p1prev - endp; + /* Keep in this line everything up to the continuation column. */ + p1 = endp; + } + + /* Finish deciding which character to start the next line on, + and what hpos to start it at. + Also set `lastpos' to the last position which counts as "on this line" + for cursor-positioning. */ + + if (pos < ZV) + { + if (FETCH_CHAR (pos) == '\n') + /* If stopped due to a newline, start next line after it */ + pos++; + else + /* Stopped due to right margin of window */ + { + if (truncate) + { + *p1++ = truncator; + /* Truncating => start next line after next newline, + and point is on this line if it is before the newline, + and skip none of first char of next line */ + pos = find_next_newline (pos, 1); + val.hpos = XINT (w->hscroll) ? 1 - XINT (w->hscroll) : 0; + + lastpos = pos - (FETCH_CHAR (pos - 1) == '\n'); + } + else + { + *p1++ = continuer; + val.vpos = 0; + lastpos--; + } + } + } + + /* If point is at eol or in invisible text at eol, + record its screen location now. */ + + if (start <= point && point <= lastpos && cursor_vpos < 0) + { + cursor_vpos = vpos; + cursor_hpos = p1 - startp; + } + + if (cursor_vpos == vpos) + { + if (cursor_hpos < 0) cursor_hpos = 0; + if (cursor_hpos > width) cursor_hpos = width; + cursor_hpos += XFASTINT (w->left); + if (w == XWINDOW (SCREEN_SELECTED_WINDOW (s))) + { + SCREEN_CURSOR_Y (s) = cursor_vpos; + SCREEN_CURSOR_X (s) = cursor_hpos; + + if (w == XWINDOW (selected_window)) + { + /* Line is not continued and did not start + in middle of character */ + if ((hpos - XFASTINT (w->left) + == (XINT (w->hscroll) ? 1 - XINT (w->hscroll) : 0)) + && val.vpos) + { + this_line_bufpos = start; + this_line_buffer = current_buffer; + this_line_vpos = cursor_vpos; + this_line_start_hpos = hpos; + this_line_endpos = Z - lastpos; + } + else + this_line_bufpos = 0; + } + } + } + + /* If hscroll and line not empty, insert truncation-at-left marker */ + if (hscroll && lastpos != start) + { + *startp = truncator; + if (p1 <= startp) + p1 = startp + 1; + } + + if (XFASTINT (w->width) + XFASTINT (w->left) != SCREEN_WIDTH (s)) + { + endp++; + if (p1 < startp) p1 = startp; + while (p1 < endp) *p1++ = SPACEGLYPH; + *p1++ = '|'; + } + desired_glyphs->used[vpos] = max (desired_glyphs->used[vpos], + p1 - desired_glyphs->glyphs[vpos]); + desired_glyphs->glyphs[vpos][desired_glyphs->used[vpos]] = 0; + + /* If the start of this line is the overlay arrow-position, + then put the arrow string into the display-line. */ + + if (XTYPE (Voverlay_arrow_position) == Lisp_Marker + && current_buffer == XMARKER (Voverlay_arrow_position)->buffer + && start == marker_position (Voverlay_arrow_position) + && XTYPE (Voverlay_arrow_string) == Lisp_String + && ! overlay_arrow_seen) + { + unsigned char *p = XSTRING (Voverlay_arrow_string)->data; + int i; + int len = XSTRING (Voverlay_arrow_string)->size; + + if (len > XFASTINT (w->width) - 1) + len = XFASTINT (w->width) - 1; + for (i = 0; i < len; i++) + startp[i] = p[i]; + if (desired_glyphs->used[vpos] < + (len + startp - desired_glyphs->glyphs[vpos])) + desired_glyphs->used[vpos] = len + startp - desired_glyphs->glyphs[vpos]; + + overlay_arrow_seen = 1; + } + + val.bufpos = pos; + val_display_text_line = val; + return &val_display_text_line; +} + +/* Display the mode line for window w */ + +static void +display_mode_line (w) + struct window *w; +{ + register int vpos = XFASTINT (w->height) + XFASTINT (w->top) - 1; + register int left = XFASTINT (w->left); + register int right = XFASTINT (w->width) + left; + register SCREEN_PTR s = XSCREEN (WINDOW_SCREEN (w)); + + get_display_line (s, vpos, left); + display_mode_element (w, vpos, left, 0, right, right, + current_buffer->mode_line_format); + SCREEN_DESIRED_GLYPHS (s)->bufp[vpos] = 0; + + /* Make the mode line inverse video if the entire line + is made of mode lines. + I.e. if this window is full width, + or if it is the child of a full width window + (which implies that that window is split side-by-side + and the rest of this line is mode lines of the sibling windows). */ + if (XFASTINT (w->width) == SCREEN_WIDTH (s) + || XFASTINT (XWINDOW (w->parent)->width) == SCREEN_WIDTH (s)) + s->desired_glyphs->highlight[vpos] = mode_line_inverse_video; + +#ifdef HAVE_X_WINDOWS + /* I'm trying this out because I saw Unimpress use it, but it's + possible that this may fuck adversely with some window managers. jla */ + + if (SCREEN_IS_X (s) + && (XTYPE (Vglobal_minibuffer_screen) != Lisp_Screen + || s != XSCREEN (Vglobal_minibuffer_screen)) + && w == XWINDOW (s->selected_window) + && (NULL (Fstring_equal (XBUFFER (w->buffer)->name, s->name)))) + x_set_name (s, XBUFFER (w->buffer)->name, Qnil); +#endif +} + +/* Contribute ELT to the mode line for window W. + How it translates into text depends on its data type. + + VPOS is the position of the mode line being displayed. + + HPOS is the position (absolute on screen) where this element's text + should start. The output is truncated automatically at the right + edge of window W. + + DEPTH is the depth in recursion. It is used to prevent + infinite recursion here. + + MINENDCOL is the hpos before which the element may not end. + The element is padded at the right with spaces if nec + to reach this column. + + MAXENDCOL is the hpos past which this element may not extend. + If MINENDCOL is > MAXENDCOL, MINENDCOL takes priority. + (This is necessary to make nested padding and truncation work.) + + Returns the hpos of the end of the text generated by ELT. + The next element will receive that value as its HPOS arg, + so as to concatenate the elements. */ + +static int +display_mode_element (w, vpos, hpos, depth, minendcol, maxendcol, elt) + struct window *w; + register int vpos, hpos; + int depth; + int minendcol; + register int maxendcol; + register Lisp_Object elt; +{ + tail_recurse: + if (depth > 10) + goto invalid; + + depth++; + +#ifdef SWITCH_ENUM_BUG + switch ((int) XTYPE (elt)) +#else + switch (XTYPE (elt)) +#endif + { + case Lisp_String: + { + /* A string: output it and check for %-constructs within it. */ + register unsigned char c; + register unsigned char *this = XSTRING (elt)->data; + + while (hpos < maxendcol && *this) + { + unsigned char *last = this; + while ((c = *this++) != '\0' && c != '%') + ; + if (this - 1 != last) + { + register int lim = --this - last + hpos; + hpos = display_string (w, vpos, last, hpos, 0, hpos, + min (lim, maxendcol)); + } + else /* c == '%' */ + { + register int spec_width = 0; + + /* We can't allow -ve args due to the "%-" construct */ + /* Argument specifies minwidth but not maxwidth + (maxwidth can be specified by + ( . ) mode-line elements) */ + + while ((c = *this++) >= '0' && c <= '9') + { + spec_width = spec_width * 10 + (c - '0'); + } + + spec_width += hpos; + if (spec_width > maxendcol) + spec_width = maxendcol; + + if (c == 'M') + hpos = display_mode_element (w, vpos, hpos, depth, + spec_width, maxendcol, + Vglobal_mode_string); + else if (c != 0) + hpos = display_string (w, vpos, + decode_mode_spec (w, c, + maxendcol - hpos), + hpos, 0, spec_width, maxendcol); + } + } + } + break; + + case Lisp_Symbol: + /* A symbol: process the value of the symbol recursively + as if it appeared here directly. Avoid error if symbol void. + Special case: if value of symbol is a string, output the string + literally. */ + { + register Lisp_Object tem; + tem = Fboundp (elt); + if (!NULL (tem)) + { + tem = Fsymbol_value (elt); + /* If value is a string, output that string literally: + don't check for % within it. */ + if (XTYPE (tem) == Lisp_String) + hpos = display_string (w, vpos, XSTRING (tem)->data, + hpos, 0, minendcol, maxendcol); + /* Give up right away for nil or t. */ + else if (!EQ (tem, elt)) + { elt = tem; goto tail_recurse; } + } + } + break; + + case Lisp_Cons: + { + register Lisp_Object car, tem; + + /* A cons cell: three distinct cases. + If first element is a string or a cons, process all the elements + and effectively concatenate them. + If first element is a negative number, truncate displaying cdr to + at most that many characters. If positive, pad (with spaces) + to at least that many characters. + If first element is a symbol, process the cadr or caddr recursively + according to whether the symbol's value is non-nil or nil. */ + car = XCONS (elt)->car; + if (XTYPE (car) == Lisp_Symbol) + { + tem = Fboundp (car); + elt = XCONS (elt)->cdr; + if (XTYPE (elt) != Lisp_Cons) + goto invalid; + /* elt is now the cdr, and we know it is a cons cell. + Use its car if CAR has a non-nil value. */ + if (!NULL (tem)) + { + tem = Fsymbol_value (car); + if (!NULL (tem)) + { elt = XCONS (elt)->car; goto tail_recurse; } + } + /* Symbol's value is nil (or symbol is unbound) + Get the cddr of the original list + and if possible find the caddr and use that. */ + elt = XCONS (elt)->cdr; + if (NULL (elt)) + break; + else if (XTYPE (elt) != Lisp_Cons) + goto invalid; + elt = XCONS (elt)->car; + goto tail_recurse; + } + else if (XTYPE (car) == Lisp_Int) + { + register int lim = XINT (car); + elt = XCONS (elt)->cdr; + if (lim < 0) + /* Negative int means reduce maximum width. + DO NOT change MINENDCOL here! + (20 -10 . foo) should truncate foo to 10 col + and then pad to 20. */ + maxendcol = min (maxendcol, hpos - lim); + else if (lim > 0) + { + /* Padding specified. Don't let it be more than + current maximum. */ + lim += hpos; + if (lim > maxendcol) + lim = maxendcol; + /* If that's more padding than already wanted, queue it. + But don't reduce padding already specified even if + that is beyond the current truncation point. */ + if (lim > minendcol) + minendcol = lim; + } + goto tail_recurse; + } + else if (XTYPE (car) == Lisp_String || XTYPE (car) == Lisp_Cons) + { + register int limit = 50; + /* LIMIT is to protect against circular lists. */ + while (XTYPE (elt) == Lisp_Cons && --limit > 0 + && hpos < maxendcol) + { + hpos = display_mode_element (w, vpos, hpos, depth, + hpos, maxendcol, + XCONS (elt)->car); + elt = XCONS (elt)->cdr; + } + } + } + break; + + default: + invalid: + return (display_string (w, vpos, "*invalid*", hpos, 0, + minendcol, maxendcol)); + } + + end: + if (minendcol > hpos) + hpos = display_string (w, vpos, "", hpos, 0, minendcol, -1); + return hpos; +} + +/* Return a string for the output of a mode line %-spec for window W, + generated by character C and width MAXWIDTH. */ + +static char * +decode_mode_spec (w, c, maxwidth) + struct window *w; + register char c; + register int maxwidth; +{ + Lisp_Object obj = Qnil; + SCREEN_PTR scr = XSCREEN (WINDOW_SCREEN (w)); + char *decode_mode_spec_buf = (char *) SCREEN_TEMP_GLYPHS (scr)->total_contents; + + if (maxwidth > SCREEN_WIDTH (scr)) + maxwidth = SCREEN_WIDTH (scr); + + switch (c) + { + case 'b': + obj = current_buffer->name; +#if 0 + if (maxwidth >= 3 && XSTRING (obj)->size > maxwidth) + { + bcopy (XSTRING (obj)->data, decode_mode_spec_buf, maxwidth - 1); + decode_mode_spec_buf[maxwidth - 1] = '\\'; + decode_mode_spec_buf[maxwidth] = '\0'; + return decode_mode_spec_buf; + } +#endif + break; + + case 'f': + obj = current_buffer->filename; +#if 0 + if (NULL (obj)) + return "[none]"; + else if (XTYPE (obj) == Lisp_String && XSTRING (obj)->size > maxwidth) + { + bcopy ("...", decode_mode_spec_buf, 3); + bcopy (XSTRING (obj)->data + XSTRING (obj)->size - maxwidth + 3, + decode_mode_spec_buf + 3, maxwidth - 3); + return decode_mode_spec_buf; + } +#endif + break; + + case 'm': + obj = current_buffer->mode_name; + break; + + case 'n': + if (BEGV > BEG || ZV < Z) + return " Narrow"; + break; + + case '*': + if (!NULL (current_buffer->read_only)) + return "%"; + if (MODIFF > current_buffer->save_modified) + return "*"; + return "-"; + + case 's': + /* status of process */ +#ifdef subprocesses + obj = Fget_buffer_process (Fcurrent_buffer ()); + if (NULL (obj)) + return "no process"; + obj = Fsymbol_name (Fprocess_status (obj)); + break; +#else + return "no processes"; +#endif /* subprocesses */ + + case 'p': + { + int pos = marker_position (w->start); + int total = ZV - BEGV; + + if (XFASTINT (w->window_end_pos) <= Z - ZV) + { + if (pos <= BEGV) + return "All"; + else + return "Bottom"; + } + else if (pos <= BEGV) + return "Top"; + else + { + total = ((pos - BEGV) * 100 + total - 1) / total; + /* We can't normally display a 3-digit number, + so get us a 2-digit number that is close. */ + if (total == 100) + total = 99; + sprintf (decode_mode_spec_buf, "%2d%%", total); + return decode_mode_spec_buf; + } + } + + case '%': + return "%"; + + case '[': + { + int i; + char *p; + + if (command_loop_level > 5) + return "[[[... "; + p = decode_mode_spec_buf; + for (i = 0; i < command_loop_level; i++) + *p++ = '['; + *p = 0; + return decode_mode_spec_buf; + } + + case ']': + { + int i; + char *p; + + if (command_loop_level > 5) + return " ...]]]"; + p = decode_mode_spec_buf; + for (i = 0; i < command_loop_level; i++) + *p++ = ']'; + *p = 0; + return decode_mode_spec_buf; + } + + case '-': + { + static char lots_of_dashes[] = "--------------------------------------------------------------------------------------------------------------------------------------------"; + register char *p; + register int i; + + if (maxwidth < sizeof (lots_of_dashes)) + return lots_of_dashes; + else + { + for (p = decode_mode_spec_buf, i = maxwidth; i > 0; i--) + *p++ = '-'; + *p = '\0'; + } + return decode_mode_spec_buf; + } + } + + if (XTYPE (obj) == Lisp_String) + return (char *) XSTRING (obj)->data; + else + return ""; +} + +/* Display STRING on one line of window W, starting at HPOS. + Display at position VPOS. Caller should have done get_display_line. + + TRUNCATE is GLYPH to display at end if truncated. Zero for none. + + MINCOL is the first column ok to end at. (Pad with spaces to this col.) + MAXCOL is the last column ok to end at. Truncate here. + -1 for MINCOL or MAXCOL means no explicit minimum or maximum. + Both count from the left edge of the screen, as does HPOS. + The right edge of W is an implicit maximum. + If TRUNCATE is nonzero, the implicit maximum is one column before the edge. + + Returns ending hpos */ + +static int +display_string (w, vpos, string, hpos, truncate, mincol, maxcol) + struct window *w; + unsigned char *string; + int vpos, hpos; + GLYPH truncate; + int mincol, maxcol; +{ + register int c; + register GLYPH *p1; + int hscroll = XINT (w->hscroll); + int tab_width = XINT (current_buffer->tab_width); + register GLYPH *start; + register GLYPH *end; + struct screen_glyphs *desired_glyphs = SCREEN_DESIRED_GLYPHS (XSCREEN (w->screen)); + GLYPH *p1start = desired_glyphs->glyphs[vpos] + hpos; + int window_width = XFASTINT (w->width); + + /* Use the standard display table, not the window's display table. + We don't want the mode line in rot13. */ + register struct Lisp_Vector *dp = 0; + + if (XTYPE (Vstandard_display_table) == Lisp_Vector + && XVECTOR (Vstandard_display_table)->size == DISP_TABLE_SIZE) + dp = XVECTOR (Vstandard_display_table); + + if (tab_width <= 0 || tab_width > 20) tab_width = 8; + + p1 = p1start; + start = desired_glyphs->glyphs[vpos] + XFASTINT (w->left); + end = start + window_width - (truncate != 0); + + if ((window_width + XFASTINT (w->left)) + != SCREEN_WIDTH (XSCREEN (WINDOW_SCREEN (w)))) + *end-- = '|'; + + if (maxcol >= 0 && end - desired_glyphs->glyphs[vpos] > maxcol) + end = desired_glyphs->glyphs[vpos] + maxcol; + if (maxcol >= 0 && mincol > maxcol) + mincol = maxcol; + + while (p1 < end) + { + c = *string++; + if (!c) break; + if (c >= 040 && c < 0177 + && (dp == 0 || XTYPE (DISP_CHAR_ROPE (dp, c)) != Lisp_String)) + { + if (p1 >= start) + *p1 = c; + p1++; + } + else if (c == '\t') + { + do + { + if (p1 >= start && p1 < end) + *p1 = SPACEGLYPH; + p1++; + } + while ((p1 - start + hscroll - (hscroll > 0)) % tab_width); + } + else if (dp != 0 && XTYPE (DISP_CHAR_ROPE (dp, c)) == Lisp_String) + p1 = copy_rope (p1, start, DISP_CHAR_ROPE (dp, c)); + else if (c < 0200 && buffer_defaults.ctl_arrow) + { + if (p1 >= start) + *p1 = (dp && XTYPE (DISP_CTRL_GLYPH (dp)) == Lisp_Int + ? XINT (DISP_CTRL_GLYPH (dp)) : '^'); + p1++; + if (p1 >= start) + *p1 = c ^ 0100; + p1++; + } + else + { + if (p1 >= start) + *p1 = (dp && XTYPE (DISP_ESCAPE_GLYPH (dp)) == Lisp_Int + ? XINT (DISP_ESCAPE_GLYPH (dp)) : '\\'); + p1++; + if (p1 >= start) + *p1 = (c >> 6) + '0'; + p1++; + if (p1 >= start) + *p1 = (7 & (c >> 3)) + '0'; + p1++; + if (p1 >= start) + *p1 = (7 & c) + '0'; + p1++; + } + } + + if (c) + { + p1 = end; + if (truncate) *p1++ = truncate; + } + else if (mincol >= 0) + { + end = desired_glyphs->glyphs[vpos] + mincol; + while (p1 < end) + *p1++ = SPACEGLYPH; + } + + { + register int len = p1 - desired_glyphs->glyphs[vpos]; + + if (len > desired_glyphs->used[vpos]) + desired_glyphs->used[vpos] = len; + desired_glyphs->glyphs[vpos][desired_glyphs->used[vpos]] = 0; + + return len; + } +} + +void +syms_of_xdisp () +{ + staticpro (&last_arrow_position); + staticpro (&last_arrow_string); + last_arrow_position = Qnil; + last_arrow_string = Qnil; + + DEFVAR_LISP ("global-mode-string", &Vglobal_mode_string, + "String displayed by mode-line-format's \"%m\" specifiation."); + Vglobal_mode_string = Qnil; + + DEFVAR_LISP ("overlay-arrow-position", &Voverlay_arrow_position, + "Marker for where to display an arrow on top of the buffer text.\n\ +This must be the beginning of a line in order to work.\n\ +See also `overlay-arrow-string'."); + Voverlay_arrow_position = Qnil; + + DEFVAR_LISP ("overlay-arrow-string", &Voverlay_arrow_string, + "String to display as an arrow. See also `overlay-arrow-position'."); + Voverlay_arrow_string = Qnil; + + DEFVAR_INT ("scroll-step", &scroll_step, + "*The number of lines to try scrolling a window by when point moves out.\n\ +If that fails to bring point back on screen, point is centered instead.\n\ +If this is zero, point is always centered after it moves off screen."); + + DEFVAR_INT ("debug-end-pos", &debug_end_pos, "Don't ask"); + + DEFVAR_BOOL ("truncate-partial-width-windows", + &truncate_partial_width_windows, + "*Non-nil means truncate lines in all windows less than full screen wide."); + truncate_partial_width_windows = 1; + + DEFVAR_BOOL ("mode-line-inverse-video", &mode_line_inverse_video, + "*Non-nil means use inverse video for the mode line."); + mode_line_inverse_video = 1; + +#ifndef MULTI_SCREEN + defsubr (&Sredraw_display); +#endif /* MULTI_SCREEN */ +} + +/* initialize the window system */ +init_xdisp () +{ + Lisp_Object root_window; +#ifndef COMPILER_REGISTER_BUG + register +#endif /* COMPILER_REGISTER_BUG */ + struct window *mini_w; + + this_line_bufpos = 0; + + mini_w = XWINDOW (minibuf_window); + root_window = mini_w->prev; + + echo_area_glyphs = 0; + previous_echo_glyphs = 0; + + if (!noninteractive) + { + SCREEN_PTR s = XSCREEN (WINDOW_SCREEN (XWINDOW (root_window))); + XFASTINT (XWINDOW (root_window)->top) = 0; + set_window_height (root_window, SCREEN_HEIGHT (s) - 1, 0); + XFASTINT (mini_w->top) = SCREEN_HEIGHT (s) - 1; + set_window_height (minibuf_window, 1, 0); + + XFASTINT (XWINDOW (root_window)->width) = SCREEN_WIDTH (s); + XFASTINT (mini_w->width) = SCREEN_WIDTH (s); + } +}