# HG changeset patch # User Glenn Morris # Date 1189053375 0 # Node ID 5e43166d9d062612cf8b4e007b2d8225562dead8 # Parent 6b43164de1e9f73bc21afc69aefd601d6e4c1447 Move to ../doc/emacs/, misc/ diff -r 6b43164de1e9 -r 5e43166d9d06 man/faq.texi --- a/man/faq.texi Thu Sep 06 04:36:10 2007 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,5590 +0,0 @@ -\input texinfo @c -*- mode: texinfo; -*- -@c %**start of header -@setfilename ../info/efaq -@settitle GNU Emacs FAQ -@c %**end of header - -@setchapternewpage odd - -@c This is used in many places -@set VER 22.1 - -@c This file is maintained by Romain Francoise . -@c Feel free to install changes without prior permission (but I'd -@c appreciate a notice if you do). - -@copying -Copyright @copyright{} 2001, 2002, 2003, 2004, 2005, 2006, 2007 -Free Software Foundation, Inc.@* -Copyright 1994,1995,1996,1997,1998,1999,2000 Reuven M. Lerner@* -Copyright 1992,1993 Steven Byrnes@* -Copyright 1990,1991,1992 Joseph Brian Wells@* - -@quotation -This list of frequently asked questions about GNU Emacs with answers -(``FAQ'') may be translated into other languages, transformed into other -formats (e.g. Texinfo, Info, WWW, WAIS), and updated with new information. - -The same conditions apply to any derivative of the FAQ as apply to the FAQ -itself. Every copy of the FAQ must include this notice or an approved -translation, information on who is currently maintaining the FAQ and how to -contact them (including their e-mail address), and information on where the -latest version of the FAQ is archived (including FTP information). - -The FAQ may be copied and redistributed under these conditions, except that -the FAQ may not be embedded in a larger literary work unless that work -itself allows free copying and redistribution. - -[This version has been heavily edited since it was included in the Emacs -distribution.] -@end quotation -@end copying - -@dircategory Emacs -@direntry -* Emacs FAQ: (efaq). Frequently Asked Questions about Emacs. -@end direntry - -@c The @titlepage stuff only appears in the printed version -@titlepage -@sp 10 -@center @titlefont{GNU Emacs FAQ} - -@c The following two commands start the copyright page. -@page -@vskip 0pt plus 1filll -@insertcopying -@end titlepage - -@node Top, FAQ notation, (dir), (dir) - -This is the GNU Emacs FAQ, last updated on @today{}. - -This FAQ is maintained as a part of GNU Emacs. If you find any errors, -or have any suggestions, please use @kbd{M-x report-emacs-bug} to report -them. - -@menu -* FAQ notation:: -* General questions:: -* Getting help:: -* Status of Emacs:: -* Common requests:: -* Bugs and problems:: -* Compiling and installing Emacs:: -* Finding Emacs and related packages:: -* Major packages and programs:: -* Key bindings:: -* Alternate character sets:: -* Mail and news:: -* Concept index:: -@end menu - -@c ------------------------------------------------------------ -@node FAQ notation, General questions, Top, Top -@chapter FAQ notation -@cindex FAQ notation - -This chapter describes notation used in the GNU Emacs FAQ, as well as in -the Emacs documentation. Consult this section if this is the first time -you are reading the FAQ, or if you are confused by notation or terms -used in the FAQ. - -@menu -* Basic keys:: -* Extended commands:: -* On-line manual:: -* File-name conventions:: -* Common acronyms:: -@end menu - -@node Basic keys, Extended commands, FAQ notation, FAQ notation -@section What do these mean: @kbd{C-h}, @kbd{C-M-a}, @key{RET}, @kbd{@key{ESC} a}, etc.? -@cindex Basic keys -@cindex Control key, notation for -@cindex @key{Meta} key, notation for -@cindex Control-Meta characters, notation for -@cindex @kbd{C-h}, definition of -@cindex @kbd{C-M-h}, definition of -@cindex @key{DEL}, definition of -@cindex @key{ESC}, definition of -@cindex @key{LFD}, definition of -@cindex @key{RET}, definition of -@cindex @key{SPC}, definition of -@cindex @key{TAB}, definition of -@cindex Notation for keys - -@itemize @bullet - -@item -@kbd{C-x}: press the @key{x} key while holding down the @key{Control} key - -@item -@kbd{M-x}: press the @key{x} key while holding down the @key{Meta} key -(if your computer doesn't have a @key{Meta} key, @pxref{No Meta key}) - -@item -@kbd{M-C-x}: press the @key{x} key while holding down both @key{Control} -and @key{Meta} - -@item -@kbd{C-M-x}: a synonym for the above - -@item -@key{LFD}: Linefeed or Newline; same as @kbd{C-j} - -@item -@key{RET}: @key{Return}, sometimes marked @key{Enter}; same as @kbd{C-m} - -@item -@key{DEL}: @key{Delete}, usually @strong{not} the same as -@key{Backspace}; same as @kbd{C-?} (see @ref{Backspace invokes help}, if -deleting invokes Emacs help) - -@item -@key{ESC}: Escape; same as @kbd{C-[} - -@item -@key{TAB}: Tab; same as @kbd{C-i} - -@item -@key{SPC}: Space bar - -@end itemize - -Key sequences longer than one key (and some single-key sequences) are -written inside quotes or on lines by themselves, like this: - -@display - @kbd{M-x frobnicate-while-foo RET} -@end display - -@noindent -Any real spaces in such a key sequence should be ignored; only @key{SPC} -really means press the space key. - -The @acronym{ASCII} code sent by @kbd{C-x} (except for @kbd{C-?}) is the value -that would be sent by pressing just @key{x} minus 96 (or 64 for -upper-case @key{X}) and will be from 0 to 31. On Unix and GNU/Linux -terminals, the @acronym{ASCII} code sent by @kbd{M-x} is the sum of 128 and the -@acronym{ASCII} code that would be sent by pressing just @key{x}. Essentially, -@key{Control} turns off bits 5 and 6 and @key{Meta} turns on bit -7@footnote{ -DOS and Windows terminals don't set bit 7 when the @key{Meta} key is -pressed.}. - -@kbd{C-?} (aka @key{DEL}) is @acronym{ASCII} code 127. It is a misnomer to call -@kbd{C-?} a ``control'' key, since 127 has both bits 5 and 6 turned ON. -Also, on very few keyboards does @kbd{C-?} generate @acronym{ASCII} code 127. - -@inforef{Text Characters, Text Characters, emacs}, and @inforef{Keys, -Keys, emacs}, for more information. (@xref{On-line manual}, for more -information about Info.) - -@node Extended commands, On-line manual, Basic keys, FAQ notation -@section What does @file{M-x @var{command}} mean? -@cindex Extended commands -@cindex Commands, extended -@cindex M-x, meaning of - -@kbd{M-x @var{command}} means type @kbd{M-x}, then type the name of the -command, then type @key{RET}. (@xref{Basic keys}, if you're not sure -what @kbd{M-x} and @key{RET} mean.) - -@kbd{M-x} (by default) invokes the command -@code{execute-extended-command}. This command allows you to run any -Emacs command if you can remember the command's name. If you can't -remember the command's name, you can type @key{TAB} and @key{SPC} for -completion, @key{?} for a list of possibilities, and @kbd{M-p} and -@kbd{M-n} (or up-arrow and down-arrow on terminals that have these -editing keys) to see previous commands entered. An Emacs @dfn{command} -is an @dfn{interactive} Emacs function. - -@cindex @key{Do} key -Your system administrator may have bound other key sequences to invoke -@code{execute-extended-command}. A function key labeled @kbd{Do} is a -good candidate for this, on keyboards that have such a key. - -If you need to run non-interactive Emacs functions, see @ref{Evaluating -Emacs Lisp code}. - -@node On-line manual, File-name conventions, Extended commands, FAQ notation -@section How do I read topic XXX in the on-line manual? -@cindex On-line manual, reading topics in -@cindex Reading topics in the on-line manual -@cindex Finding topics in the on-line manual -@cindex Info, finding topics in - -When we refer you to some @var{topic} in the on-line manual, you can -read this manual node inside Emacs (assuming nothing is broken) by -typing @kbd{C-h i m emacs @key{RET} m @var{topic} @key{RET}}. - -This invokes Info, the GNU hypertext documentation browser. If you don't -already know how to use Info, type @key{?} from within Info. - -If we refer to @var{topic}:@var{subtopic}, type @kbd{C-h i m emacs -@key{RET} m @var{topic} @key{RET} m @var{subtopic} @key{RET}}. - -If these commands don't work as expected, your system administrator may -not have installed the Info files, or may have installed them -improperly. In this case you should complain. - -@xref{Getting a printed manual}, if you would like a paper copy of the -Emacs manual. - -@node File-name conventions, Common acronyms, On-line manual, FAQ notation -@section What are @file{etc/SERVICE}, @file{src/config.h}, and @file{lisp/default.el}? -@cindex File-name conventions -@cindex Conventions for file names -@cindex Directories and files that come with Emacs - -These are files that come with Emacs. The Emacs distribution is divided -into subdirectories; the important ones are @file{etc}, @file{lisp}, and -@file{src}. - -If you use Emacs, but don't know where it is kept on your system, start -Emacs, then type @kbd{C-h v data-directory @key{RET}}. The directory -name displayed by this will be the full pathname of the installed -@file{etc} directory. (This full path is recorded in the Emacs variable -@code{data-directory}, and @kbd{C-h v} displays the value and the -documentation of a variable.) - -The location of your Info directory (i.e., where on-line documentation -is stored) is kept in the variable @code{Info-default-directory-list}. Use -@kbd{C-h v Info-default-directory-list @key{RET}} to see the value of -this variable, which will be a list of directory names. The last -directory in that list is probably where most Info files are stored. By -default, Info documentation is placed in @file{/usr/local/info}. - -Some of these files are available individually via FTP or e-mail; see -@ref{Informational files for Emacs}. They all are available in the -source distribution. Many of the files in the @file{etc} directory are -also available via the Emacs @samp{Help} menu, or by typing @kbd{C-h ?} -(@kbd{M-x help-for-help}). - -Your system administrator may have removed the @file{src} directory and -many files from the @file{etc} directory. - -@node Common acronyms, , File-name conventions, FAQ notation -@section What are FSF, LPF, OSF, GNU, RMS, FTP, and GPL? -@cindex FSF, definition of -@cindex LPF, definition of -@cindex OSF, definition of -@cindex GNU, definition of -@cindex RMS, definition of -@cindex Stallman, Richard, acronym for -@cindex Richard Stallman, acronym for -@cindex FTP, definition of -@cindex GPL, definition of -@cindex Acronyms, definitions for -@cindex Common acronyms, definitions for - -@table @asis - -@item FSF -Free Software Foundation - -@item LPF -League for Programming Freedom - -@item OSF -Open Software Foundation - -@item GNU -GNU's Not Unix - -@item RMS -Richard Matthew Stallman - -@item FTP -File Transfer Protocol - -@item GPL -GNU General Public License - -@end table - -Avoid confusing the FSF, the LPF, and the OSF. The LPF opposes -look-and-feel copyrights and software patents. The FSF aims to make -high quality free software available for everyone. The OSF is a -consortium of computer vendors which develops commercial software for -Unix systems. - -The word ``free'' in the title of the Free Software Foundation refers to -``freedom,'' not ``zero cost.'' Anyone can charge any price for -GPL-covered software that they want to. However, in practice, the -freedom enforced by the GPL leads to low prices, because you can always -get the software for less money from someone else, since everyone has -the right to resell or give away GPL-covered software. - -@c ------------------------------------------------------------ -@node General questions, Getting help, FAQ notation, Top -@chapter General questions -@cindex General questions - -This chapter contains general questions having to do with Emacs, the -Free Software Foundation, and related organizations. - -@menu -* The LPF:: -* Real meaning of copyleft:: -* Guidelines for newsgroup postings:: -* Newsgroup archives:: -* Reporting bugs:: -* Unsubscribing from Emacs lists:: -* Contacting the FSF:: -@end menu - -@node The LPF, Real meaning of copyleft, General questions, General questions -@section What is the LPF? -@cindex LPF, description of -@cindex League for Programming Freedom -@cindex Software patents, opposition to -@cindex Patents for software, opposition to - -The LPF opposes the expanding danger of software patents and -look-and-feel copyrights. To get more information, feel free to contact -the LPF via e-mail or otherwise. You may also contact -@email{jbw@@cs.bu.edu, Joe Wells}; he will be happy to talk to you -about the LPF. - -You can find more information about the LPF in the file @file{etc/LPF}. -More papers describing the LPF's views are available on the Internet and -also from @uref{http://lpf.ai.mit.edu/, the LPF home page}. - -@node Real meaning of copyleft, Guidelines for newsgroup postings, The LPF, General questions -@section What is the real legal meaning of the GNU copyleft? -@cindex Copyleft, real meaning of -@cindex GPL, real meaning of -@cindex General Public License, real meaning of -@cindex Discussion of the GPL - -The real legal meaning of the GNU General Public License (copyleft) will -only be known if and when a judge rules on its validity and scope. -There has never been a copyright infringement case involving the GPL to -set any precedents. Please take any discussion regarding this issue to -the newsgroup @uref{news:gnu.misc.discuss}, which was created to hold the -extensive flame wars on the subject. - -RMS writes: - -@quotation -The legal meaning of the GNU copyleft is less important than the spirit, -which is that Emacs is a free software project and that work pertaining -to Emacs should also be free software. ``Free'' means that all users -have the freedom to study, share, change and improve Emacs. To make -sure everyone has this freedom, pass along source code when you -distribute any version of Emacs or a related program, and give the -recipients the same freedom that you enjoyed. -@end quotation - -@node Guidelines for newsgroup postings, Newsgroup archives, Real meaning of copyleft, General questions -@section What are appropriate messages for @uref{news:gnu.emacs.help}, @uref{news:gnu.emacs.bug}, @uref{news:comp.emacs}, etc.? -@cindex Newsgroups, appropriate messages for -@cindex GNU newsgroups, appropriate messages for -@cindex Usenet groups, appropriate messages for -@cindex Mailing lists, appropriate messages for -@cindex Posting messages to newsgroups - -@cindex GNU mailing lists -The file @file{etc/MAILINGLISTS} describes the purpose of each GNU -mailing list. (@xref{Informational files for Emacs}, if you want a copy -of the file.) For those lists which are gatewayed with newsgroups, it -lists both the newsgroup name and the mailing list address. - -The newsgroup @uref{news:comp.emacs} is for discussion of Emacs programs -in general. This includes Emacs along with various other -implementations, such as XEmacs, JOVE, MicroEmacs, Freemacs, MG, -Unipress, CCA, and Epsilon. - -Many people post Emacs questions to @uref{news:comp.emacs} because they -don't receive any of the @code{gnu.*} newsgroups. Arguments have been -made both for and against posting GNU-Emacs-specific material to -@uref{news:comp.emacs}. You have to decide for yourself. - -Messages advocating ``non-free'' software are considered unacceptable on -any of the @code{gnu.*} newsgroups except for @uref{news:gnu.misc.discuss}, -which was created to hold the extensive flame-wars on the subject. -``Non-free'' software includes any software for which the end user can't -freely modify the source code and exchange enhancements. Be careful to -remove the @code{gnu.*} groups from the @samp{Newsgroups:} line when -posting a followup that recommends such software. - -@uref{news:gnu.emacs.bug} is a place where bug reports appear, but avoid -posting bug reports to this newsgroup directly (@pxref{Reporting bugs}). - -@node Newsgroup archives, Reporting bugs, Guidelines for newsgroup postings, General questions -@section Where can I get old postings to @uref{news:gnu.emacs.help} and other GNU groups? -@cindex Archived postings from @code{gnu.emacs.help} -@cindex Usenet archives for GNU groups -@cindex Old Usenet postings for GNU groups - -The FSF has maintained archives of all of the GNU mailing lists for many -years, although there may be some unintentional gaps in coverage. The -archive is not particularly well organized or easy to retrieve -individual postings from, but pretty much everything is there. - -The archive is at @uref{ftp://lists.gnu.org/}. - -The archive can be browsed over the web at -@uref{http://lists.gnu.org/archive/html/, the GNU mail archive}. - -Web-based Usenet search services, such as -@uref{http://groups.google.com/groups/dir?sel=33592484, Google}, also -archive the @code{gnu.*} groups. - -You can read the archives of the @code{gnu.*} groups and post new -messages at @uref{http://gmane.org/, Gmane}. - -@node Reporting bugs, Unsubscribing from Emacs lists, Newsgroup archives, General questions -@section Where should I report bugs and other problems with Emacs? -@cindex Bug reporting -@cindex Good bug reports -@cindex How to submit a bug report -@cindex Reporting bugs - -The correct way to report Emacs bugs is to use the command -@kbd{M-x report-emacs-bug}. It sets up a mail buffer with the -essential information and the correct e-mail address which is -@email{bug-gnu-emacs@@gnu.org} for the released versions of Emacs. -Anything sent to @email{bug-gnu-emacs@@gnu.org} also appears in the -newsgroup @uref{news:gnu.emacs.bug}, but please use e-mail instead of -news to submit the bug report. This ensures a reliable return address -so you can be contacted for further details. - -Be sure to read the ``Bugs'' section of the Emacs manual before reporting -a bug! The manual describes in detail how to submit a useful bug -report (@pxref{Bugs, , Reporting Bugs, emacs, The GNU Emacs Manual}). -(@xref{On-line manual}, if you don't know how to read the manual.) - -RMS says: - -@quotation -Sending bug reports to @email{help-gnu-emacs@@gnu.org} (which has the -effect of posting on @uref{news:gnu.emacs.help}) is undesirable because -it takes the time of an unnecessarily large group of people, most of -whom are just users and have no idea how to fix these problem. -@email{bug-gnu-emacs@@gnu.org} reaches a much smaller group of people -who are more likely to know what to do and have expressed a wish to -receive more messages about Emacs than the others. -@end quotation - -RMS says it is sometimes fine to post to @uref{news:gnu.emacs.help}: - -@quotation -If you have reported a bug and you don't hear about a possible fix, -then after a suitable delay (such as a week) it is okay to post on -@code{gnu.emacs.help} asking if anyone can help you. -@end quotation - -If you are unsure whether you have found a bug, consider the following -non-exhaustive list, courtesy of RMS: - -@quotation -If Emacs crashes, that is a bug. If Emacs gets compilation errors -while building, that is a bug. If Emacs crashes while building, that -is a bug. If Lisp code does not do what the documentation says it -does, that is a bug. -@end quotation - -@node Unsubscribing from Emacs lists, Contacting the FSF, Reporting bugs, General questions -@section How do I unsubscribe from this mailing list? -@cindex Unsubscribing from GNU mailing lists -@cindex Removing yourself from GNU mailing lists - -If you are receiving a GNU mailing list named @var{list}, you might be -able to unsubscribe from it by sending a request to the address -@email{@var{list}-request@@gnu.org}. However, this will not work if you are -not listed on the main mailing list, but instead receive the mail from a -distribution point. In that case, you will have to track down at which -distribution point you are listed. Inspecting the @samp{Received} headers -on the mail messages may help, along with liberal use of the @samp{EXPN} or -@samp{VRFY} sendmail commands through @samp{telnet @var{site-address} -smtp}. Ask your postmaster for help, if you cannot figure out these -details. - -@node Contacting the FSF, , Unsubscribing from Emacs lists, General questions -@section What is the current address of the FSF? -@cindex Snail mail address of the FSF -@cindex Postal address of the FSF -@cindex Contracting the FSF -@cindex Free Software Foundation, contacting - -@table @asis - -@item E-mail -gnu@@gnu.org - -@item Telephone -+1-617-542-5942 - -@item Fax -+1-617-542-2652 - -@item World Wide Web -@uref{http://www.gnu.org/} - -@item Postal address -Free Software Foundation@* -51 Franklin Street, Fifth Floor@* -Boston, MA 02110-1301@* -USA@* - -@end table - -@cindex Ordering GNU software -For details on how to order items directly from the FSF, see the -@uref{http://www.gnu.org/order/order.html, GNU Web site}. - -@c ------------------------------------------------------------ -@node Getting help, Status of Emacs, General questions, Top -@chapter Getting help -@cindex Getting help - -This chapter tells you how to get help with Emacs - -@menu -* Basic editing:: -* Learning how to do something:: -* Getting a printed manual:: -* Emacs Lisp documentation:: -* Installing Texinfo documentation:: -* Printing a Texinfo file:: -* Viewing Info files outside of Emacs:: -* Informational files for Emacs:: -* Help installing Emacs:: -* Obtaining the FAQ:: -@end menu - -@node Basic editing, Learning how to do something, Getting help, Getting help -@section I'm just starting Emacs; how do I do basic editing? -@cindex Basic editing with Emacs -@cindex Beginning editing -@cindex Tutorial, invoking the -@cindex Self-paced tutorial, invoking the -@cindex Help system, entering the - -Type @kbd{C-h t} to invoke the self-paced tutorial. Just typing -@kbd{C-h} enters the help system. Starting with Emacs 22, the tutorial -is available in many foreign languages such as French, German, Japanese, -Russian, etc. Use @kbd{M-x help-with-tutorial-spec-language @key{RET}} -to choose your language and start the tutorial. - -Your system administrator may have changed @kbd{C-h} to act like -@key{DEL} to deal with local keyboards. You can use @kbd{M-x -help-for-help} instead to invoke help. To discover what key (if any) -invokes help on your system, type @kbd{M-x where-is @key{RET} -help-for-help @key{RET}}. This will print a comma-separated list of key -sequences in the echo area. Ignore the last character in each key -sequence listed. Each of the resulting key sequences invokes help. - -Emacs help works best if it is invoked by a single key whose value -should be stored in the variable @code{help-char}. - -@node Learning how to do something, Getting a printed manual, Basic editing, Getting help -@section How do I find out how to do something in Emacs? -@cindex Help for Emacs -@cindex Learning to do something in Emacs -@cindex Reference card for Emacs -@cindex Overview of help systems - -There are several methods for finding out how to do things in Emacs. - -@itemize @bullet - -@cindex Reading the Emacs manual -@item -The complete text of the Emacs manual is available on-line via the Info -hypertext reader. Type @kbd{C-h r} to display the manual in Info mode. -Typing @key{h} immediately after entering Info will provide a short -tutorial on how to use it. - -@cindex Lookup a subject in a manual -@cindex Index search in a manual -@item -To quickly locate the section of the manual which discusses a certain -issue, or describes a command or a variable, type @kbd{C-h i m emacs -@key{RET} i @var{topic} @key{RET}}, where @var{topic} is the name of the -topic, the command, or the variable which you are looking for. If this -does not land you on the right place in the manual, press @kbd{,} -(comma) repeatedly until you find what you need. (The @kbd{i} and -@kbd{,} keys invoke the index-searching functions, which look for the -@var{topic} you type in all the indices of the Emacs manual.) - -@cindex Apropos -@item -You can list all of the commands whose names contain a certain word -(actually which match a regular expression) using @kbd{C-h a} (@kbd{M-x -command-apropos}). - -@cindex Command description in the manual -@item -The command @kbd{C-h F} (@code{Info-goto-emacs-command-node}) prompts -for the name of a command, and then attempts to find the section in the -Emacs manual where that command is described. - -@cindex Finding commands and variables -@item -You can list all of the functions and variables whose names contain a -certain word using @kbd{M-x apropos}. - -@item -You can list all of the functions and variables whose documentation -matches a regular expression or a string, using @kbd{M-x -apropos-documentation}. - -@item -You can order a hardcopy of the manual from the FSF. @xref{Getting a -printed manual}. - -@cindex Reference cards, in other languages -@item -You can get a printed reference card listing commands and keys to -invoke them. You can order one from the FSF for $1 (or 10 for $5), -or you can print your own from the @file{etc/refcards/refcard.tex} or -@file{etc/refcards/refcard.ps} files in the Emacs distribution. -Beginning with version 21.1, the Emacs distribution comes with -translations of the reference card into several languages; look for -files named @file{etc/refcards/@var{lang}-refcard.*}, where @var{lang} -is a two-letter code of the language. For example, the German version -of the reference card is in the files @file{etc/refcards/de-refcard.tex} -and @file{etc/recards/de-refcard.ps}. - -@item -There are many other commands in Emacs for getting help and -information. To get a list of these commands, type @samp{?} after -@kbd{C-h}. - -@end itemize - -@node Getting a printed manual, Emacs Lisp documentation, Learning how to do something, Getting help -@section How do I get a printed copy of the Emacs manual? -@cindex Printed Emacs manual, obtaining -@cindex Manual, obtaining a printed or HTML copy of -@cindex Emacs manual, obtaining a printed or HTML copy of - -You can order a printed copy of the Emacs manual from the FSF. For -details see the @uref{http://www.gnu.org/order/order.html, GNU Web site}. - -@c The number 620 below is version-dependent! -The full Texinfo source for the manual also comes in the @file{man} -directory of the Emacs distribution, if you're daring enough to try to -print out this 620-page manual yourself (@pxref{Printing a Texinfo -file}). - -If you absolutely have to print your own copy, and you don't have @TeX{}, -you can get a PostScript version from - -@uref{http://www.gnu.org/software/emacs/manual/emacs.ps.gz} - -@cindex HTML version of Emacs manual, obtaining -An HTML version of the manual is at - -@uref{http://www.gnu.org/software/emacs/manual/emacs.html} - -The manual is available in other formats at - -@uref{http://www.gnu.org/software/emacs/manual/} - -@xref{Learning how to do something}, for how to view the manual on-line. - -@node Emacs Lisp documentation, Installing Texinfo documentation, Getting a printed manual, Getting help -@section Where can I get documentation on Emacs Lisp? -@cindex Documentation on Emacs Lisp -@cindex Function documentation -@cindex Variable documentation -@cindex Emacs Lisp Reference Manual -@cindex Reference manual for Emacs Lisp - -Within Emacs, you can type @kbd{C-h f} to get the documentation for a -function, @kbd{C-h v} for a variable. - -For more information, the Emacs Lisp Reference Manual is available -on-line, in Info format. @xref{Top, Emacs Lisp,, elisp, The -Emacs Lisp Reference Manual}. - -You can also order a hardcopy of the manual, details on ordering it from -FSF are on the @uref{http://www.gnu.org/order/order.html, GNU Web site}. - -An HTML version of the Emacs Lisp Reference Manual is available at - -@uref{http://www.gnu.org/software/emacs/elisp-manual/elisp.html} - -@node Installing Texinfo documentation, Printing a Texinfo file, Emacs Lisp documentation, Getting help -@section How do I install a piece of Texinfo documentation? -@cindex Texinfo documentation, installing -@cindex Installing Texinfo documentation -@cindex New Texinfo files, installing -@cindex Documentation, installing new Texinfo files -@cindex Info files, how to install - -First, you must turn the Texinfo files into Info files. You may do this -using the stand-alone @file{makeinfo} program, available as part of the latest -Texinfo package at - -@uref{ftp://ftp.gnu.org/pub/gnu/texinfo/texinfo-4.8.tar.gz} - -and all mirrors of @samp{ftp.gnu.org} (for a list, @pxref{Current GNU -distributions}). - -For information about the Texinfo format, read the Texinfo manual which -comes with the Texinfo package. This manual also comes installed in -Info format, so you can read it on-line; type @kbd{C-h i m texinfo -@key{RET}}. - -Alternatively, you could use the Emacs command @kbd{M-x -texinfo-format-buffer}, after visiting the Texinfo source file of the -manual you want to convert. - -Neither @code{texinfo-format-buffer} nor @file{makeinfo} installs the -resulting Info files in Emacs's Info tree. To install Info files, -perform these steps: - -@enumerate -@item -Move the files to the @file{info} directory in the installed Emacs -distribution. @xref{File-name conventions}, if you don't know where that -is. - -@item -Run the @code{install-info} command, which is part of the Texinfo -distribution, to update the main Info directory menu, like this: - -@example - install-info --info-dir=@var{dir-path} @var{dir-path}/@var{file} -@end example - -@noindent -where @var{dir-path} is the full path to the directory where you copied -the produced Info file(s), and @var{file} is the name of the Info file -you produced and want to install. - -If you don't have the @code{install-info} command installed, you can -edit the file @file{info/dir} in the installed Emacs distribution, and -add a line for the top level node in the Info package that you are -installing. Follow the examples already in this file. The format is: - -@example -* Topic: (relative-pathname). Short description of topic. -@end example - -@end enumerate - -If you want to install Info files and you don't have the necessary -privileges, you have several options: - -@itemize @bullet -@item -Info files don't actually need to be installed before being used. -You can use a prefix argument for the @code{info} command and specify -the name of the Info file in the minibuffer. This goes to the node -named @samp{Top} in that file. For example, to view a Info file named -@file{@var{info-file}} in your home directory, you can type this: - -@example -@kbd{C-u C-h i ~/@var{info-file} @key{RET}} -@end example - -Alternatively, you can feed a file name to the @code{Info-goto-node} -command (invoked by pressing @key{g} in Info mode) by typing the name -of the file in parentheses, like this: - -@example -@kbd{C-h i g (~/@var{info-file}) @key{RET}} -@end example - -@item -You can create your own Info directory. You can tell Emacs where that -Info directory is by adding its pathname to the value of the variable -@code{Info-default-directory-list}. For example, to use a private Info -directory which is a subdirectory of your home directory named @file{Info}, -you could put this in your @file{.emacs} file: - -@lisp -(setq Info-default-directory-list - (cons "~/Info" Info-default-directory-list)) -@end lisp - -You will need a top-level Info file named @file{dir} in this directory -which has everything the system @file{dir} file has in it, except it should -list only entries for Info files in that directory. You might not need -it if all files in this directory were referenced by other @file{dir} -files. The node lists from all @file{dir} files in -@code{Info-default-directory-list} are merged by the Info system. - -@end itemize - -@node Printing a Texinfo file, Viewing Info files outside of Emacs, Installing Texinfo documentation, Getting help -@section How do I print a Texinfo file? -@cindex Printing a Texinfo file -@cindex Texinfo file, printing -@cindex Printing documentation - -You can't get nicely printed output from Info files; you must still have -the original Texinfo source file for the manual you want to print. - -Assuming you have @TeX{} installed on your system, follow these steps: - -@enumerate - -@item -Make sure the first line of the Texinfo file looks like this: - -@example -\input texinfo -@end example - -You may need to change @samp{texinfo} to the full pathname of the -@file{texinfo.tex} file, which comes with Emacs as -@file{man/texinfo.tex} (or copy or link it into the current directory). - -@item -Type @kbd{texi2dvi @var{texinfo-source}}, where @var{texinfo-source} is -the name of the Texinfo source file for which you want to produce a -printed copy. - -The @samp{texi2dvi} script is part of the GNU Texinfo distribution -(@pxref{Installing Texinfo documentation}). - -@item -Print the DVI file @file{@var{texinfo-source}.dvi} in the normal way for -printing DVI files at your site. For example, if you have a PostScript -printer, run the @code{dvips} program to print the DVI file on that -printer. - -@end enumerate - -To get more general instructions, retrieve the latest Texinfo package -(@pxref{Installing Texinfo documentation}). - -@node Viewing Info files outside of Emacs, Informational files for Emacs, Printing a Texinfo file, Getting help -@section Can I view Info files without using Emacs? -@cindex Viewing Info files -@cindex Info file viewers -@cindex Alternative Info file viewers - -Yes. Here are some alternative programs: - -@itemize @bullet - -@item -@code{info}, a stand-alone version of the Info program, comes as part of -the Texinfo package. @xref{Installing Texinfo documentation}, for -details. - -@item -Xinfo, a stand-alone version of the Info program that runs under X -Window system. You can get it at -@uref{ftp://ftp.gnu.org/pub/gnu/xinfo/xinfo-1.01.01.tar.gz} and all -mirrors of @samp{ftp.gnu.org} (see @ref{Current GNU distributions}, for a -list of mirrors). - -@item -Tkinfo, an Info viewer that runs under X Window system and uses Tcl/Tk. -You can get Tkinfo at -@uref{http://math-www.uni-paderborn.de/~axel/tkinfo/}. - -@end itemize - -@node Informational files for Emacs, Help installing Emacs, Viewing Info files outside of Emacs, Getting help -@section What informational files are available for Emacs? -@cindex Informational files included with Emacs -@cindex Files included with Emacs -@cindex @file{COPYING}, description of file -@cindex @file{DISTRIB}, description of file -@cindex @file{FTP}, description of file -@cindex @file{GNU}, description of file -@cindex @file{INTERVIEW}, description of file -@cindex @file{LPF}, description of file -@cindex @file{MACHINES}, description of file -@cindex @file{MAILINGLISTS}, description of file -@cindex @file{NEWS}, description of file -@cindex @file{SERVICE}, description of file -@cindex @file{SUN-SUPPORT}, description of file - -This isn't a frequently asked question, but it should be! A variety of -informational files about Emacs and relevant aspects of the GNU project -are available for you to read. - -The following files are available in the @file{etc} directory of the -Emacs distribution (see @ref{File-name conventions}, if you're not sure -where that is). - -@table @file - -@item COPYING -GNU General Public License - -@item DISTRIB -Emacs Availability Information, including the popular Free Software -Foundation Order Form - -@item FTP -How to get GNU Software by Internet FTP or by UUCP - -@item GNU -The GNU Manifesto - -@item INTERVIEW -Richard Stallman discusses his public-domain UNIX-compatible software -system with BYTE editors - -@item LPF -Why you should join the League for Programming Freedom - -@item MACHINES -Status of Emacs on Various Machines and Systems - -@item MAILINGLISTS -GNU Project Electronic Mailing Lists - -@item NEWS -Emacs news, a history of recent user-visible changes - -@item SERVICE -GNU Service Directory - -@item SUN-SUPPORT -including ``Using Emacstool with GNU Emacs'' - -@end table - -More GNU information, including back issues of the @cite{GNU's -Bulletin}, are at - -@uref{http://www.gnu.org/bulletins/bulletins.html} and - -@uref{http://www.cs.pdx.edu/~trent/gnu/gnu.html} - -@node Help installing Emacs, Obtaining the FAQ, Informational files for Emacs, Getting help -@section Where can I get help in installing Emacs? -@cindex Installation help -@cindex Help installing Emacs - -@xref{Installing Emacs}, for some basic installation hints, and see -@ref{Problems building Emacs}, or @ref{Linking with -lX11 fails}, if you -have problems with the installation. - -The file @file{etc/SERVICE} (see @ref{File-name conventions}, if you're -not sure where that is) lists companies and individuals willing to sell -you help in installing or using Emacs. An up-to-date version this file -is available on @samp{ftp.gnu.org} (@pxref{Informational files for -Emacs}). - -@node Obtaining the FAQ, , Help installing Emacs, Getting help -@section Where can I get the latest version of this FAQ? -@cindex FAQ, obtaining the -@cindex Latest FAQ version, obtaining the -@cindex Retrieving the latest FAQ version -@cindex E-mail, retrieving the FAQ via -@cindex Web, reading the FAQ on the - -The Emacs FAQ is available in several ways: - -@itemize @bullet - -@item -Inside of Emacs itself. You can get it from selecting the @samp{Emacs -FAQ} option from the @samp{Help} menu of the Emacs menu bar at the top -of any Emacs frame, or by typing @kbd{C-h C-f} (@kbd{M-x view-emacs-FAQ}). - -@item -Via USENET. If you can read news, the FAQ should be available in your -news spool, in both the @uref{news:gnu.emacs.help} and -@uref{news:comp.emacs} newsgroups. Every news reader should allow you -to read any news article that is still in the news spool, even if you -have read the article before. You may need to read the instructions for -your news reader to discover how to do this. In @file{rn}, this command -will do this for you at the article selection level: - -@example -?GNU Emacs Frequently Asked Questions?rc:m -@end example - -In Gnus, you should type @kbd{C-u C-x C-s} from the @file{*Summary*} -buffer or @kbd{C-u @key{SPC}} from the @file{*Newsgroup*} buffer to view -all articles in a newsgroup. - -If the FAQ articles have expired and have been deleted from your news -spool, it might (or might not) do some good to complain to your news -administrator, because the most recent FAQ should not expire for a -while. - -@item -In the Emacs distribution. Since Emacs 18.56, the FAQ at the time -of release has been part of the Emacs distribution as either -@file{etc/FAQ} or @file{man/faq.texi} (@pxref{File-name conventions}). - -@item -Via anonymous ftp and e-mail from @file{rtfm.mit.edu} (and its mirror in -Europe), the main repository for FAQs and other items posted to -news.answers. The Emacs FAQs are available at - -@uref{ftp://rtfm.mit.edu/pub/usenet/comp.emacs/} and - -@uref{ftp://ftp.uni-paderborn.de/pub/doc/FAQ/comp/emacs/} - -If you do not have access to anonymous FTP, you can access the archives -using the @file{rtfm.mit.edu} mail server. The Emacs FAQ can be -retrieved by sending mail to @email{mail-server@@rtfm.mit.edu} with a -blank subject and containing - -@example -send usenet/news.answers/GNU-Emacs-FAQ/diffs -send usenet/news.answers/GNU-Emacs-FAQ/part1 -send usenet/news.answers/GNU-Emacs-FAQ/part2 -send usenet/news.answers/GNU-Emacs-FAQ/part3 -send usenet/news.answers/GNU-Emacs-FAQ/part4 -send usenet/news.answers/GNU-Emacs-FAQ/part5 -@end example - -For more information, send email to @email{mail-server@@rtfm.mit.edu} -with @samp{help} and @samp{index} in the body on separate lines. -@end itemize - -@c ------------------------------------------------------------ -@node Status of Emacs, Common requests, Getting help, Top -@chapter Status of Emacs -@cindex Status of Emacs - -This chapter gives you basic information about Emacs, including its -latest version status. - -@menu -* Origin of the term Emacs:: -* Latest version of Emacs:: -* New in Emacs 20:: -* New in Emacs 21:: -* New in Emacs 22:: -@end menu - -@node Origin of the term Emacs, Latest version of Emacs, Status of Emacs, Status of Emacs -@section Where does the name ``Emacs'' come from? -@cindex Origin of the term ``Emacs'' -@cindex Emacs name origin -@cindex TECO -@cindex Original version of Emacs - -Emacs originally was an acronym for Editor MACroS. RMS says he ``picked -the name Emacs because @key{E} was not in use as an abbreviation on ITS at -the time.'' The first Emacs was a set of macros written in 1976 at MIT -by RMS for the editor TECO (Text Editor and COrrector, originally Tape -Editor and COrrector) under ITS on a PDP-10. RMS had already extended -TECO with a ``real-time'' full-screen mode with reprogrammable keys. -Emacs was started by @email{gls@@east.sun.com, Guy Steele} as a project -to unify the many divergent TECO command sets and key bindings at MIT, -and completed by RMS. - -Many people have said that TECO code looks a lot like line noise; you -can read more at @uref{news:alt.lang.teco}. Someone has written a TECO -implementation in Emacs Lisp (to find it, see @ref{Packages that do not -come with Emacs}); it would be an interesting project to run the -original TECO Emacs inside of Emacs. - -@cindex Why Emacs? -For some not-so-serious alternative reasons for Emacs to have that -name, check out the file @file{etc/JOKES} (@pxref{File-name -conventions}). - -@node Latest version of Emacs, New in Emacs 20, Origin of the term Emacs, Status of Emacs -@section What is the latest version of Emacs? -@cindex Version, latest -@cindex Latest version of Emacs - -Emacs @value{VER} is the current version as of this writing. - -@node New in Emacs 20, New in Emacs 21, Latest version of Emacs, Status of Emacs -@section What is different about Emacs 20? -@cindex Differences between Emacs 19 and Emacs 20 -@cindex Emacs 20, new features in - -To find out what has changed in recent versions, type @kbd{C-h C-n} -(@kbd{M-x view-emacs-news}). The oldest changes are at the bottom of -the file, so you might want to read it starting there, rather than at -the top. - -The differences between Emacs versions 18 and 19 was rather dramatic; -the introduction of frames, faces, and colors on windowing systems was -obvious to even the most casual user. - -There are differences between Emacs versions 19 and 20 as well, but many -are more subtle or harder to find. Among the changes are the inclusion -of MULE code for languages that use non-Latin characters and for mixing -several languages in the same document; the ``Customize'' facility for -modifying variables without having to use Lisp; and automatic conversion -of files from Macintosh, Microsoft, and Unix platforms. - -A number of older Lisp packages, such as Gnus, Supercite and the -calendar/diary, have been updated and enhanced to work with Emacs 20, -and are now included with the standard distribution. - - -@node New in Emacs 21, New in Emacs 22, New in Emacs 20, Status of Emacs -@section What is different about Emacs 21? -@cindex Differences between Emacs 20 and Emacs 21 -@cindex Emacs 21, new features in -@cindex Recently introduced features - -@cindex Variable-size fonts -@cindex Toolbar support -Emacs 21 features a thorough rewrite of the display engine. The new -display engine supports variable-size fonts, images, and can play sounds -on platforms which support that. As a result, the visual appearance of -Emacs, when it runs on a windowed display, is much more reminiscent of -modern GUI programs, and includes 3D widgets (used for the mode line and -the scroll bars), a configurable and extensible toolbar, tooltips -(a.k.a.@: balloon help), and other niceties. - -@cindex Colors on text-only terminals -@cindex TTY colors -In addition, Emacs 21 supports faces on text-only terminals. This means -that you can now have colors when you run Emacs on a GNU/Linux console -and on @code{xterm} with @kbd{emacs -nw}. - -@node New in Emacs 22, , New in Emacs 21, Status of Emacs -@section What is different about Emacs 22? -@cindex Differences between Emacs 21 and Emacs 22 -@cindex Emacs 22, new features in -@cindex Recently introduced features -@cindex Default features - -@itemize -@cindex GTK+ Toolkit -@cindex Drag-and-drop -@item -Emacs can be built with GTK+ widgets, and supports drag-and-drop -operation on X. - -@cindex Supported systems -@item -Emacs 22 features support for GNU/Linux systems on S390 and x86-64 -machines, as well as support for the Mac OS X and Cygwin operating -systems. - -@item -The native MS-Windows, Mac OS 9 and Mac OS X builds include full support -for images, toolbar, and tooltips. - -@item -Font Lock mode, Auto Compression mode, and File Name Shadow Mode are -enabled by default. - -@item -The maximum size of buffers has been doubled and is 256M on 32-bit -machines. - -@item -Links can be followed with @kbd{mouse-1}, in addition to @kbd{mouse-2}. - -@cindex Mouse wheel -@item -Mouse wheel support is enabled by default. - -@item -Window fringes are customizable. - -@item -The mode line of the selected window is now highlighted. - -@item -The minibuffer prompt is displayed in a distinct face. - -@item -Abbrev definitions are read automatically at startup. - -@item -Grep mode is separate from Compilation mode and has many new options and -commands specific to grep. - -@item -The original Emacs macro system has been replaced by the new Kmacro -package, which provides many new commands and features and a simple -interface that uses the function keys F3 and F4. Macros are stored in a -macro ring, and can be debugged and edited interactively. - -@item -The Grand Unified Debugger (GUD) can be used with a full graphical user -interface to GDB; this provides many features found in traditional -development environments, making it easy to manipulate breakpoints, add -watch points, display the call stack, etc. Breakpoints are visually -indicated in the source buffer. - -@item -@cindex New modes -Many new modes and packages have been included in Emacs, such as Calc, -TRAMP, URL, IDO, CUA, ERC, rcirc, Table, Image-Dired, SES, Ruler, Org, -PGG, Flymake, Password, Printing, Reveal, wdired, t-mouse, longlines, -savehist, Conf mode, Python mode, DNS mode, etc. - -@cindex Multilingual Environment -@item -Leim is now part of Emacs. Unicode support has been much improved, and -the following input methods have been added: belarusian, bulgarian-bds, -bulgarian-phonetic, chinese-sisheng, croatian, dutch, georgian, -latin-alt-postfix, latin-postfix, latin-prefix, latvian-keyboard, -lithuanian-numeric, lithuanian-keyboard, malayalam-inscript, rfc1345, -russian-computer, sgml, slovenian, tamil-inscript, ucs, -ukrainian-computer, vietnamese-telex, and welsh. - -The following language environments have also been added: Belarusian, -Bulgarian, Chinese-EUC-TW, Croatian, French, Georgian, Italian, Latin-6, -Latin-7, Latvian, Lithuanian, Malayalam, Russian, Slovenian, Swedish, -Tajik, Tamil, UTF-8, Ukrainian, Welsh, and Windows-1255. - -@cindex Documentation -@cindex Emacs Lisp Manual -@item -In addition, Emacs 22 now includes the Emacs Lisp Reference Manual -(@pxref{Emacs Lisp documentation}) and the Emacs Lisp Intro. -@end itemize - -Many other changes have been made in Emacs 22, use @kbd{C-h n} to get a -full list. - -@c ------------------------------------------------------------ -@node Common requests, Bugs and problems, Status of Emacs, Top -@chapter Common requests -@cindex Common requests - -@menu -* Setting up a customization file:: -* Using Customize:: -* Colors on a TTY:: -* Debugging a customization file:: -* Displaying the current line or column:: -* Displaying the current file name in the titlebar:: -* Turning on abbrevs by default:: -* Associating modes with files:: -* Highlighting a region:: -* Replacing highlighted text:: -* Controlling case sensitivity:: -* Working with unprintable characters:: -* Searching for/replacing newlines:: -* Yanking text in isearch:: -* Wrapping words automatically:: -* Turning on auto-fill by default:: -* Spell-checkers:: -* Checking TeX and *roff documents:: -* Changing load-path:: -* Using an already running Emacs process:: -* Compiler error messages:: -* Indenting switch statements:: -* Customizing C and C++ indentation:: -* Horizontal scrolling:: -* Overwrite mode:: -* Turning off beeping:: -* Turning the volume down:: -* Automatic indentation:: -* Matching parentheses:: -* Hiding #ifdef lines:: -* Repeating commands:: -* Valid X resources:: -* Evaluating Emacs Lisp code:: -* Changing the length of a Tab:: -* Inserting text at the beginning of each line:: -* Underlining paragraphs:: -* Forcing the cursor to remain in the same column:: -* Forcing Emacs to iconify itself:: -* Using regular expressions:: -* Replacing text across multiple files:: -* Documentation for etags:: -* Disabling backups:: -* Disabling auto-save-mode:: -* Going to a line by number:: -* Modifying pull-down menus:: -* Deleting menus and menu options:: -* Turning on syntax highlighting:: -* Scrolling only one line:: -* Editing MS-DOS files:: -* Filling paragraphs with a single space:: -* Escape sequences in shell output:: -* Fullscreen mode on MS-Windows:: -@end menu - -@node Setting up a customization file, Using Customize, Common requests, Common requests -@section How do I set up a @file{.emacs} file properly? -@cindex @file{.emacs} file, setting up -@cindex @file{.emacs} file, locating -@cindex Init file, setting up -@cindex Customization file, setting up - -@inforef{Init File, Init File, emacs}. - -In general, new Emacs users should not have @file{.emacs} files, because -it causes confusing non-standard behavior. Then they send questions to -@email{help-gnu-emacs@@gnu.org} asking why Emacs isn't behaving as -documented. - -Beginning with version 20.1, Emacs includes the new Customize facility -(@pxref{Using Customize}). This allows users who are unfamiliar with -Emacs Lisp to modify their @file{.emacs} files in a relatively -straightforward way, using menus rather than Lisp code. Most packages -support Customize as of this writing. - -While Customize might indeed make it easier to configure Emacs, -consider taking a bit of time to learn Emacs Lisp and modifying your -@file{.emacs} directly. Simple configuration options are described -rather completely in @inforef{Init File, Init File, emacs}, for users -interested in performing frequently requested, basic tasks. - -Sometimes users are unsure as to where their @file{.emacs} file should -be found. Visiting the file as @file{~/.emacs} from Emacs will find -the correct file. - -@node Using Customize, Colors on a TTY, Setting up a customization file, Common requests -@section How do I start using Customize? -@cindex Customize groups -@cindex Customizing variables -@cindex Customizing faces - -The main Customize entry point is @kbd{M-x customize @key{RET}}. This -command takes you to a buffer listing all the available Customize -groups. From there, you can access all customizable options and faces, -change their values, and save your changes to your init file. -@inforef{Easy Customization, Easy Customization, emacs}. - -If you know the name of the group in advance (e.g. ``shell''), use -@kbd{M-x customize-group @key{RET}}. - -If you wish to customize a single option, use @kbd{M-x customize-option -@key{RET}}. This command prompts you for the name of the option to -customize, with completion. - -@node Colors on a TTY, Debugging a customization file, Using Customize, Common requests -@section How do I get colors and syntax highlighting on a TTY? -@cindex Colors on a TTY -@cindex Syntax highlighting on a TTY -@cindex Console, colors - -In Emacs 21.1 and later, colors and faces are supported in non-windowed mode, -i.e.@: on Unix and GNU/Linux text-only terminals and consoles, and when -invoked as @samp{emacs -nw} on X, MS-Windows, and Mac. (Colors and faces were -supported in the MS-DOS port since Emacs 19.29.) Emacs automatically -detects color support at startup and uses it if available. If you think -that your terminal supports colors, but Emacs won't use them, check the -@code{termcap} entry for your display type for color-related -capabilities. - -The command @kbd{M-x list-colors-display} pops up a window which -exhibits all the colors Emacs knows about on the current display. - -Syntax highlighting is on by default since version 22.1. - -@node Debugging a customization file, Displaying the current line or column, Colors on a TTY, Common requests -@section How do I debug a @file{.emacs} file? -@cindex Debugging @file{.emacs} file -@cindex @file{.emacs} debugging -@cindex Init file debugging -@cindex @samp{-debug-init} option - -Start Emacs with the @samp{-debug-init} command-line option. This -enables the Emacs Lisp debugger before evaluating your @file{.emacs} -file, and places you in the debugger if something goes wrong. The top -line in the @file{trace-back} buffer will be the error message, and the -second or third line of that buffer will display the Lisp code from your -@file{.emacs} file that caused the problem. - -You can also evaluate an individual function or argument to a function -in your @file{.emacs} file by moving the cursor to the end of the -function or argument and typing @kbd{C-x C-e} (@kbd{M-x -eval-last-sexp}). - -Use @kbd{C-h v} (@kbd{M-x describe-variable}) to check the value of -variables which you are trying to set or use. - -@node Displaying the current line or column, Displaying the current file name in the titlebar, Debugging a customization file, Common requests -@section How do I make Emacs display the current line (or column) number? -@cindex @code{line-number-mode} -@cindex Displaying the current line or column -@cindex Line number, displaying the current -@cindex Column, displaying the current -@cindex @code{mode-line-format} - -To have Emacs automatically display the current line number of the point -in the mode line, do @kbd{M-x line-number-mode}. You can also put the -form - -@lisp -(setq line-number-mode t) -@end lisp - -@noindent -in your @file{.emacs} file to achieve this whenever you start Emacs. -(Line number display is on by default, unless your site-specific -initialization disables it.) Note that Emacs will not display the line -number if the buffer's size in bytes is larger than the value of the -variable @code{line-number-display-limit}. - -You can similarly display the current column with -@kbd{M-x column-number-mode}, or by putting the form - -@lisp -(setq column-number-mode t) -@end lisp - -@noindent -in your @file{.emacs} file. - -The @code{"%c"} format specifier in the variable @code{mode-line-format} -will insert the current column's value into the mode line. See the -documentation for @code{mode-line-format} (using @kbd{C-h v -mode-line-format @key{RET}}) for more information on how to set and use -this variable. - -Users of all Emacs versions can display the current column using the -@samp{column} package written by @email{abraham@@dina.kvl.dk, Per -Abrahamsen}. @xref{Packages that do not come with Emacs}, for -instructions on how to get it. - -@cindex Set number capability in @code{vi} emulators -None of the @code{vi} emulation modes provide the ``set number'' -capability of @code{vi} (as far as we know). The @samp{setnu} package -written by @email{kyle@@wonderworks.com, Kyle Jones} provides this -feature. So too does @samp{wb-line-number}, written by -@email{naoki.y.nakamura@@nifty.com, Naoki Nakamura}. - -@node Displaying the current file name in the titlebar, Turning on abbrevs by default, Displaying the current line or column, Common requests -@section How can I modify the titlebar to contain the current file name? -@cindex Titlebar, displaying the current file name in -@cindex File name, displaying in the titlebar -@cindex @code{frame-title-format} - -The contents of an Emacs frame's titlebar is controlled by the variable -@code{frame-title-format}, which has the same structure as the variable -@code{mode-line-format}. (Use @kbd{C-h v} or @kbd{M-x -describe-variable} to get information about one or both of these -variables.) - -By default, the titlebar for a frame does contain the name of the buffer -currently being visited, except if there is a single frame. In such a -case, the titlebar contains Emacs invocation name and the name of the -machine at which Emacs was invoked. This is done by setting -@code{frame-title-format} to the default value of - -@lisp -(multiple-frames "%b" ("" invocation-name "@@" system-name)) -@end lisp - -To modify the behavior such that frame titlebars contain the buffer's -name regardless of the number of existing frames, include the following -in your @file{.emacs}: - -@lisp -(setq frame-title-format "%b") -@end lisp - -@node Turning on abbrevs by default, Associating modes with files, Displaying the current file name in the titlebar, Common requests -@section How do I turn on abbrevs by default just in mode @var{mymode}? -@cindex Abbrevs, turning on by default - -Put this in your @file{.emacs} file: - -@lisp -(condition-case () - (quietly-read-abbrev-file) - (file-error nil)) - -(add-hook '@var{mymode}-mode-hook - (lambda () - (setq abbrev-mode t))) -@end lisp - -Starting with Emacs 22, the standard abbrevs file is read automatically -at startup, so the first of these two forms becomes unnecessary. - -@node Associating modes with files, Highlighting a region, Turning on abbrevs by default, Common requests -@section How do I make Emacs use a certain major mode for certain files? -@cindex Associating modes with files -@cindex File extensions and modes -@cindex @code{auto-mode-alist}, modifying -@cindex Modes, associating with file extensions - -If you want to use a certain mode @var{foo} for all files whose names end -with the extension @file{.@var{bar}}, this will do it for you: - -@lisp -(setq auto-mode-alist (cons '("\\.@var{bar}\\'" . @var{foo}-mode) auto-mode-alist)) -@end lisp - -Otherwise put this somewhere in the first line of any file you want to -edit in the mode @var{foo} (in the second line, if the first line begins -with @samp{#!}): - -@example --*- @var{foo} -*- -@end example - -@cindex Major mode for shell scripts -Beginning with Emacs 19, the variable @code{interpreter-mode-alist} -specifies which mode to use when loading a shell script. (Emacs -determines which interpreter you're using by examining the first line of -the script.) This feature only applies when the file name doesn't -indicate which mode to use. Use @kbd{C-h v} (or @kbd{M-x -describe-variable}) on @code{interpreter-mode-alist} to learn more. - -@node Highlighting a region, Replacing highlighted text, Associating modes with files, Common requests -@section How can I highlight a region of text in Emacs? -@cindex Highlighting text -@cindex Text, highlighting -@cindex @code{transient-mark-mode} -@cindex Region, highlighting a - -You can cause the region to be highlighted when the mark is active by -including - -@lisp -(transient-mark-mode t) -@end lisp - -@noindent -in your @file{.emacs} file. - -@node Replacing highlighted text, Controlling case sensitivity, Highlighting a region, Common requests -@section How can I replace highlighted text with what I type? -@cindex @code{delete-selection-mode} -@cindex Replacing highlighted text -@cindex Highlighting and replacing text - -Use @code{delete-selection-mode}, which you can start automatically by -placing the following Lisp form in your @file{.emacs} file: - -@lisp -(delete-selection-mode 1) -@end lisp - -According to the documentation string for @code{delete-selection-mode} -(which you can read using @kbd{M-x describe-function @key{RET} -delete-selection-mode @key{RET}}): - -@quotation -When ON, typed text replaces the selection if the selection is active. -When OFF, typed text is just inserted at point. -@end quotation - -This mode also allows you to delete (not kill) the highlighted region by -pressing @key{DEL}. - -@node Controlling case sensitivity, Working with unprintable characters, Replacing highlighted text, Common requests -@section How do I control Emacs's case-sensitivity when searching/replacing? -@cindex @code{case-fold-search} -@cindex Case sensitivity of searches -@cindex Searching without case sensitivity -@cindex Ignoring case in searches - -For searching, the value of the variable @code{case-fold-search} -determines whether they are case sensitive: - -@lisp -(setq case-fold-search nil) ; make searches case sensitive -(setq case-fold-search t) ; make searches case insensitive -@end lisp - -@cindex Case sensitivity in replacements -@cindex Replacing, and case sensitivity -@cindex @code{case-replace} -Similarly, for replacing, the variable @code{case-replace} determines -whether replacements preserve case. - -You can also toggle case sensitivity at will in isearch with @kbd{M-c}. - -To change the case sensitivity just for one major mode, use the major -mode's hook. For example: - -@lisp -(add-hook '@var{foo}-mode-hook - (lambda () - (setq case-fold-search nil))) -@end lisp - -@node Working with unprintable characters, Searching for/replacing newlines, Controlling case sensitivity, Common requests -@section How do I search for, delete, or replace unprintable (eight-bit or control) characters? -@cindex Unprintable characters, working with -@cindex Working with unprintable characters -@cindex Control characters, working with -@cindex Eight-bit characters, working with -@cindex Searching for unprintable characters -@cindex Regexps and unprintable characters - -To search for a single character that appears in the buffer as, for -example, @samp{\237}, you can type @kbd{C-s C-q 2 3 7}. (This assumes -the value of @code{search-quote-char} is 17 (i.e., @kbd{C-q}).) -Searching for @strong{all} unprintable characters is best done with a -regular expression (@dfn{regexp}) search. The easiest regexp to use for -the unprintable chars is the complement of the regexp for the printable -chars. - -@itemize @bullet - -@item -Regexp for the printable chars: @samp{[\t\n\r\f -~]} - -@item -Regexp for the unprintable chars: @samp{[^\t\n\r\f -~]} - -@end itemize - -To type these special characters in an interactive argument to -@code{isearch-forward-regexp} or @code{re-search-forward}, you need to -use @kbd{C-q}. (@samp{\t}, @samp{\n}, @samp{\r}, and @samp{\f} stand -respectively for @key{TAB}, @key{LFD}, @key{RET}, and @kbd{C-l}.) So, -to search for unprintable characters using @code{re-search-forward}: - -@kbd{M-x re-search-forward @key{RET} [^ @key{TAB} C-q @key{LFD} C-q @key{RET} C-q C-l @key{SPC} -~] @key{RET}} - -Using @code{isearch-forward-regexp}: - -@kbd{C-M-s [^ @key{TAB} @key{LFD} C-q @key{RET} C-q C-l @key{SPC} -~]} - -To delete all unprintable characters, simply use replace-regexp: - -@kbd{M-x replace-regexp @key{RET} [^ @key{TAB} C-q @key{LFD} C-q @key{RET} C-q C-l @key{SPC} -~] @key{RET} @key{RET}} - -Replacing is similar to the above. To replace all unprintable -characters with a colon, use: - -M-x replace-regexp @key{RET} [^ @key{TAB} C-q @key{LFD} C-q @key{RET} C-q C-l @key{SPC} -~] @key{RET} : @key{RET} - -@node Searching for/replacing newlines, Yanking text in isearch, Working with unprintable characters, Common requests -@section How do I input a newline character in isearch or query-replace? -@cindex Searching for newlines -@cindex Replacing newlines - -Use @kbd{C-q C-j}. For more information, see @inforef{Special Isearch, -Special Input for Incremental Search, emacs}. - - -@node Yanking text in isearch, Wrapping words automatically, Searching for/replacing newlines, Common requests -@section How do I copy text from the kill ring into the search string? -@cindex Yanking text into the search string -@cindex isearch yanking - -Use @kbd{M-y}. @inforef{Isearch Yank, Isearch Yanking, emacs}. - -@node Wrapping words automatically, Turning on auto-fill by default, Yanking text in isearch, Common requests -@section How do I make Emacs wrap words for me? -@cindex Wrapping word automatically -@cindex Wrapping lines -@cindex Line wrap -@cindex @code{auto-fill-mode}, introduction to -@cindex Maximum line width, default value -@cindex @code{fill-column}, default value - -Use @code{auto-fill-mode}, activated by typing @kbd{M-x auto-fill-mode}. -The default maximum line width is 70, determined by the variable -@code{fill-column}. To learn how to turn this on automatically, see -@ref{Turning on auto-fill by default}. - -@node Turning on auto-fill by default, Spell-checkers, Wrapping words automatically, Common requests -@section How do I turn on @code{auto-fill-mode} by default? -@cindex @code{auto-fill-mode}, activating automatically -@cindex Filling automatically -@cindex Automatic entry to @code{auto-fill-mode} - -To turn on @code{auto-fill-mode} just once for one buffer, use @kbd{M-x -auto-fill-mode}. - -To turn it on for every buffer in a certain mode, you must use the hook -for that mode. For example, to turn on @code{auto-fill} mode for all -text buffers, including the following in your @file{.emacs} file: - -@lisp -(add-hook 'text-mode-hook 'turn-on-auto-fill) -@end lisp - -If you want @code{auto-fill} mode on in all major modes, do this: - -@lisp -(setq-default auto-fill-function 'do-auto-fill) -@end lisp - -@node Spell-checkers, Checking TeX and *roff documents, Turning on auto-fill by default, Common requests -@section Where can I get a better spelling checker for Emacs? -@cindex Checking spelling -@cindex Spelling, checking text documents - -Use Ispell. @xref{Ispell}. - -@node Checking TeX and *roff documents, Changing load-path, Spell-checkers, Common requests -@section How can I spell-check @TeX{} or *roff documents? -@cindex Spelling, checking @TeX{} documents -@cindex @TeX{} documents, checking spelling in - -Use Ispell. Ispell can handle @TeX{} and *roff documents. -@xref{Ispell}. - -@node Changing load-path, Using an already running Emacs process, Checking TeX and *roff documents, Common requests -@section How do I change @code{load-path}? -@cindex @code{load-path}, modifying -@cindex Modifying @code{load-path} -@cindex Adding to @code{load-path} - -In general, you should only add to the @code{load-path}. You can add -directory @var{/dir/subdir} to the load path like this: - -@lisp -(setq load-path (cons "/dir/subdir/" load-path)) -@end lisp - -To do this relative to your home directory: - -@lisp -(setq load-path (cons "~/mysubdir/" load-path)) -@end lisp - -@node Using an already running Emacs process, Compiler error messages, Changing load-path, Common requests -@section How do I use an already running Emacs from another window? -@cindex @code{emacsclient} -@cindex Emacs server functions -@cindex Using an existing Emacs process - -@code{emacsclient}, which comes with Emacs, is for editing a file using -an already running Emacs rather than starting up a new Emacs. It does -this by sending a request to the already running Emacs, which must be -expecting the request. - -@itemize @bullet - -@item -Setup: - -Emacs must have executed the @code{server-start} function for -@samp{emacsclient} to work. This can be done either by a command line -option: - -@example -emacs -f server-start -@end example - -or by invoking @code{server-start} from @file{.emacs}: - -@lisp -(if (@var{some conditions are met}) (server-start)) -@end lisp - -When this is done, Emacs creates a Unix domain socket named -@file{server} in @file{/tmp/emacs@var{userid}}. See -@code{server-socket-dir}. - -To get your news reader, mail reader, etc., to invoke -@samp{emacsclient}, try setting the environment variable @code{EDITOR} -(or sometimes @code{VISUAL}) to the value @samp{emacsclient}. You may -have to specify the full pathname of the @samp{emacsclient} program -instead. Examples: - -@example -# csh commands: -setenv EDITOR emacsclient - -# using full pathname -setenv EDITOR /usr/local/emacs/etc/emacsclient - -# sh command: -EDITOR=emacsclient ; export EDITOR -@end example - -@item -Normal use: - -When @samp{emacsclient} is run, it connects to the socket and passes its -command line options to Emacs, which at the next opportunity will visit -the files specified. (Line numbers can be specified just like with -Emacs.) The user will have to switch to the Emacs window by hand. When -the user is done editing a file, the user can type @kbd{C-x #} (or -@kbd{M-x server-edit}) to indicate this. If there is another buffer -requested by @code{emacsclient}, Emacs will switch to it; otherwise -@code{emacsclient} will exit, signaling the calling program to continue. - -@cindex @code{gnuserv} -There is an enhanced version of @samp{emacsclient} called -@samp{gnuserv}, written by @email{ange@@hplb.hpl.hp.com, Andy Norman} -(@pxref{Packages that do not come with Emacs}). @samp{gnuserv} uses -Internet domain sockets, so it can work across most network connections. - -The most recent @samp{gnuserv} package is available at - -@uref{http://meltin.net/hacks/emacs/} - -@end itemize - -@node Compiler error messages, Indenting switch statements, Using an already running Emacs process, Common requests -@section How do I make Emacs recognize my compiler's funny error messages? -@cindex Compiler error messages, recognizing -@cindex Recognizing non-standard compiler errors -@cindex Regexps for recognizing compiler errors -@cindex Errors, recognizing compiler - -Customize the @code{compilation-error-regexp-alist} variable. - -@node Indenting switch statements, Customizing C and C++ indentation, Compiler error messages, Common requests -@section How do I change the indentation for @code{switch}? -@cindex @code{switch}, indenting -@cindex Indenting of @code{switch} - -Many people want to indent their @code{switch} statements like this: - -@example -f() -@{ - switch(x) @{ - case A: - x1; - break; - case B: - x2; - break; - default: - x3; - @} -@} -@end example - -The solution at first appears to be: set @code{c-indent-level} to 4 and -@code{c-label-offset} to -2. However, this will give you an indentation -spacing of four instead of two. - -The @emph{real} solution is to use @code{cc-mode} (the default mode for -C programming in Emacs 20 and later) and add the following line to your -@file{.emacs}: - -@lisp -(c-set-offset 'case-label '+) -@end lisp - -There appears to be no way to do this with the old @code{c-mode}. - -@node Customizing C and C++ indentation, Horizontal scrolling, Indenting switch statements, Common requests -@section How to customize indentation in C, C@t{++}, and Java buffers? -@cindex Indentation, how to customize -@cindex Customize indentation - -The Emacs @code{cc-mode} features an interactive procedure for -customizing the indentation style, which is fully explained in the -@cite{CC Mode} manual that is part of the Emacs distribution, see -@ref{Customizing Indentation, , Customization Indentation, ccmode, -The CC Mode Manual}. Here's a short summary of the procedure: - -@enumerate -@item -Go to the beginning of the first line where you don't like the -indentation and type @kbd{C-c C-o}. Emacs will prompt you for the -syntactic symbol; type @key{RET} to accept the default it suggests. - -@item -Emacs now prompts for the offset of this syntactic symbol, showing the -default (the current definition) inside parentheses. You can choose -one of these: - -@table @code -@item 0 -No extra indentation. -@item + -Indent one basic offset. -@item - -Outdent one basic offset. -@item ++ -Indent two basic offsets -@item -- -Outdent two basic offsets. -@item * -Indent half basic offset. -@item / -Outdent half basic offset. -@end table - -@item -After choosing one of these symbols, type @kbd{C-c C-q} to reindent -the line or the block according to what you just specified. - -@item -If you don't like the result, go back to step 1. Otherwise, add the -following line to your @file{.emacs}: - -@lisp -(c-set-offset '@var{syntactic-symbol} @var{offset}) -@end lisp - -@noindent -where @var{syntactic-symbol} is the name Emacs shows in the minibuffer -when you type @kbd{C-c C-o} at the beginning of the line, and -@var{offset} is one of the indentation symbols listed above (@code{+}, -@code{/}, @code{0}, etc.) that you've chosen during the interactive -procedure. - -@item -Go to the next line whose indentation is not to your liking and repeat -the process there. -@end enumerate - -It is recommended to put all the resulting @code{(c-set-offset ...)} -customizations inside a C mode hook, like this: - -@lisp -(defun my-c-mode-hook () - (c-set-offset ...) - (c-set-offset ...)) -(add-hook 'c-mode-hook 'my-c-mode-hook) -@end lisp - -@noindent -Using @code{c-mode-hook} avoids the need to put a @w{@code{(require -'cc-mode)}} into your @file{.emacs} file, because @code{c-set-offset} -might be unavailable when @code{cc-mode} is not loaded. - -Note that @code{c-mode-hook} runs for C source files only; use -@code{c++-mode-hook} for C@t{++} sources, @code{java-mode-hook} for -Java sources, etc. If you want the same customizations to be in -effect in @emph{all} languages supported by @code{cc-mode}, use -@code{c-mode-common-hook}. - -@node Horizontal scrolling, Overwrite mode, Customizing C and C++ indentation, Common requests -@section How can I make Emacs automatically scroll horizontally? -@cindex @code{hscroll-mode} -@cindex Horizontal scrolling -@cindex Scrolling horizontally - -In Emacs 21 and later, this is on by default: if the variable -@code{truncate-lines} is non-@code{nil} in the current buffer, Emacs -automatically scrolls the display horizontally when point moves off the -left or right edge of the window. - -Note that this is overridden by the variable -@code{truncate-partial-width-windows} if that variable is non-nil -and the current buffer is not full-frame width. - -In Emacs 20, use the @code{hscroll-mode}. Here is some information from -the documentation, available by typing @kbd{C-h f hscroll-mode @key{RET}}: - -Automatically scroll horizontally when the point moves off the -left or right edge of the window. - -@itemize @minus -@item -Type @kbd{M-x hscroll-mode} to enable it in the current buffer. - -@item -Type @kbd{M-x hscroll-global-mode} to enable it in every buffer. - -@item -@code{turn-on-hscroll} is useful in mode hooks as in: - -@lisp -(add-hook 'text-mode-hook 'turn-on-hscroll) -@end lisp - -@item -@code{hscroll-margin} controls how close the cursor can get to the -edge of the window. - -@item -@code{hscroll-step-percent} controls how far to jump once we decide to do so. -@end itemize - -@node Overwrite mode, Turning off beeping, Horizontal scrolling, Common requests -@section How do I make Emacs ``typeover'' or ``overwrite'' instead of inserting? -@cindex @key{Insert} -@cindex @code{overwrite-mode} -@cindex Overwriting existing text -@cindex Toggling @code{overwrite-mode} - -@kbd{M-x overwrite-mode} (a minor mode). This toggles -@code{overwrite-mode} on and off, so exiting from @code{overwrite-mode} -is as easy as another @kbd{M-x overwrite-mode}. - -On some systems, @key{Insert} toggles @code{overwrite-mode} on and off. - -@node Turning off beeping, Turning the volume down, Overwrite mode, Common requests -@section How do I stop Emacs from beeping on a terminal? -@cindex Beeping, turning off -@cindex Visible bell -@cindex Bell, visible - -@email{martin@@cc.gatech.edu, Martin R. Frank} writes: - -Tell Emacs to use the @dfn{visible bell} instead of the audible bell, -and set the visible bell to nothing. - -That is, put the following in your @code{TERMCAP} environment variable -(assuming you have one): - -@example -... :vb=: ... -@end example - -And evaluate the following Lisp form: - -@example -(setq visible-bell t) -@end example - -@node Turning the volume down, Automatic indentation, Turning off beeping, Common requests -@section How do I turn down the bell volume in Emacs running under X? -@cindex Bell, volume of -@cindex Volume of bell - -On X Window system, you can adjust the bell volume and duration for all -programs with the shell command @code{xset}. - -Invoking @code{xset} without any arguments produces some basic -information, including the following: - -@example -usage: xset [-display host:dpy] option ... - To turn bell off: - -b b off b 0 - To set bell volume, pitch and duration: - b [vol [pitch [dur]]] b on -@end example - -@node Automatic indentation, Matching parentheses, Turning the volume down, Common requests -@section How do I tell Emacs to automatically indent a new line to the indentation of the previous line? -@cindex Indenting new lines -@cindex New lines, indenting of -@cindex Previous line, indenting according to -@cindex Text indentation - -Such behavior is automatic in Emacs 20 and later. From the -@file{etc/NEWS} file for Emacs 20.2: - -@example -** In Text mode, now only blank lines separate paragraphs. This makes -it possible to get the full benefit of Adaptive Fill mode in Text mode, -and other modes derived from it (such as Mail mode). @key{TAB} in Text -mode now runs the command @code{indent-relative}; this makes a practical -difference only when you use indented paragraphs. - -As a result, the old Indented Text mode is now identical to Text mode, -and is an alias for it. - -If you want spaces at the beginning of a line to start a paragraph, use -the new mode, Paragraph Indent Text mode. -@end example - -@cindex Prefixing lines -@cindex Fill prefix -If you have @code{auto-fill-mode} turned on (@pxref{Turning on auto-fill -by default}), you can tell Emacs to prefix every line with a certain -character sequence, the @dfn{fill prefix}. Type the prefix at the -beginning of a line, position point after it, and then type @kbd{C-x .} -(@code{set-fill-prefix}) to set the fill prefix. Thereafter, -auto-filling will automatically put the fill prefix at the beginning of -new lines, and @kbd{M-q} (@code{fill-paragraph}) will maintain any fill -prefix when refilling the paragraph. - -If you have paragraphs with different levels of indentation, you will -have to set the fill prefix to the correct value each time you move to a -new paragraph. There are many packages available to deal with this -(@pxref{Packages that do not come with Emacs}). Look for ``fill'' and -``indent'' keywords for guidance. - -@node Matching parentheses, Hiding #ifdef lines, Automatic indentation, Common requests -@section How do I show which parenthesis matches the one I'm looking at? -@cindex Parentheses, matching -@cindex @file{paren.el} -@cindex Highlighting matching parentheses -@cindex Pairs of parentheses, highlighting -@cindex Matching parentheses - -Call @code{show-paren-mode} in your @file{.emacs} file: - -@lisp -(show-paren-mode 1) -@end lisp - -You can also enable this mode by selecting the @samp{Paren Match -Highlighting} option from the @samp{Options} menu of the Emacs menu bar -at the top of any Emacs frame. - -Alternatives to this mode include: - -@itemize @bullet - -@item -If you're looking at a right parenthesis (or brace or bracket) you can -delete it and reinsert it. Emacs will momentarily move the cursor to -the matching parenthesis. - -@item -@kbd{C-M-f} (@code{forward-sexp}) and @kbd{C-M-b} (@code{backward-sexp}) -will skip over one set of balanced parentheses, so you can see which -parentheses match. (You can train it to skip over balanced brackets -and braces at the same time by modifying the syntax table.) - -@cindex Show matching paren as in @code{vi} -@item -Here is some Emacs Lisp that will make the @key{%} key show the matching -parenthesis, like in @code{vi}. In addition, if the cursor isn't over a -parenthesis, it simply inserts a % like normal. - -@lisp -;; By an unknown contributor - -(global-set-key "%" 'match-paren) - -(defun match-paren (arg) - "Go to the matching paren if on a paren; otherwise insert %." - (interactive "p") - (cond ((looking-at "\\s\(") (forward-list 1) (backward-char 1)) - ((looking-at "\\s\)") (forward-char 1) (backward-list 1)) - (t (self-insert-command (or arg 1))))) -@end lisp - -@end itemize - -@node Hiding #ifdef lines, Repeating commands, Matching parentheses, Common requests -@section In C mode, can I show just the lines that will be left after @code{#ifdef} commands are handled by the compiler? -@cindex @code{#ifdef}, selective display of -@cindex @code{hide-ifdef-mode} -@cindex Hiding @code{#ifdef} text -@cindex Selectively displaying @code{#ifdef} code - -@kbd{M-x hide-ifdef-mode}. (This is a minor mode.) You might also want -to investigate @file{cpp.el}, which is distributed with Emacs. - -@node Repeating commands, Valid X resources, Hiding #ifdef lines, Common requests -@section How do I repeat a command as many times as possible? -@cindex Repeating commands many times -@cindex Commands, repeating many times -@cindex @code{.}, equivalent to @code{vi} command - -As of Emacs 20.3, there is indeed a @code{repeat} command (@kbd{C-x z}) -that repeats the last command. If you preface it with a prefix -argument, the prefix arg is applied to the command. - -You can also type @kbd{C-x @key{ESC} @key{ESC}} -(@code{repeat-complex-command}) to reinvoke commands that used the -minibuffer to get arguments. In @code{repeat-complex-command} you can -type @kbd{M-p} and @kbd{M-n} (and also up-arrow and down-arrow, if your -keyboard has these keys) to scan through all the different complex -commands you've typed. - -To repeat a set of commands, use keyboard macros. Use @kbd{C-x (} and -@kbd{C-x )} to make a keyboard macro that invokes the command and then -type @kbd{C-x e}. (@inforef{Keyboard Macros, Keyboard Macros, emacs}.) - -If you're really desperate for the @code{.} command in @code{vi} that -redoes the last insertion/deletion, use VIPER, a @code{vi} emulation -mode which comes with Emacs, and which appears to support it. -(@xref{VIPER}.) - -@node Valid X resources, Evaluating Emacs Lisp code, Repeating commands, Common requests -@section What are the valid X resource settings (i.e., stuff in .Xdefaults)? -@cindex Resources, X -@cindex X resources -@cindex Setting X resources - -@inforef{X Resources, X Resources, emacs}. - -You can also use a resource editor, such as editres (for X11R5 and -onwards), to look at the resource names for the menu bar, assuming Emacs -was compiled with the X toolkit. - -@node Evaluating Emacs Lisp code, Changing the length of a Tab, Valid X resources, Common requests -@section How do I execute (``evaluate'') a piece of Emacs Lisp code? -@cindex Evaluating Lisp code -@cindex Lisp forms, evaluating - -There are a number of ways to execute (@dfn{evaluate}, in Lisp lingo) an -Emacs Lisp @dfn{form}: - -@itemize @bullet - -@item -If you want it evaluated every time you run Emacs, put it in a file -named @file{.emacs} in your home directory. This is known as ``your -@file{.emacs} file,'' and contains all of your personal customizations. - -@item -You can type the form in the @file{*scratch*} buffer, and then type -@key{LFD} (or @kbd{C-j}) after it. The result of evaluating the form -will be inserted in the buffer. - -@item -In @code{emacs-lisp-mode}, typing @kbd{C-M-x} evaluates a top-level form -before or around point. - -@item -Typing @kbd{C-x C-e} in any buffer evaluates the Lisp form immediately -before point and prints its value in the echo area. - -@item -Typing @kbd{M-:} or @kbd{M-x eval-expression} allows you to type a Lisp -form in the minibuffer which will be evaluated once you press @key{RET}. - -@item -You can use @kbd{M-x load-file} to have Emacs evaluate all the Lisp -forms in a file. (To do this from Lisp use the function @code{load} -instead.) - -The functions @code{load-library}, @code{eval-region}, -@code{eval-buffer}, @code{require}, and @code{autoload} are also -useful; see @ref{Emacs Lisp documentation}, if you want to learn more -about them. - -@end itemize - -@node Changing the length of a Tab, Inserting text at the beginning of each line, Evaluating Emacs Lisp code, Common requests -@section How do I change Emacs's idea of the @key{TAB} character's length? -@cindex Tab length -@cindex Length of tab character -@cindex @code{default-tab-width} - -Set the variable @code{default-tab-width}. For example, to set -@key{TAB} stops every 10 characters, insert the following in your -@file{.emacs} file: - -@lisp -(setq default-tab-width 10) -@end lisp - -Do not confuse variable @code{tab-width} with variable -@code{tab-stop-list}. The former is used for the display of literal -@key{TAB} characters. The latter controls what characters are inserted -when you press the @key{TAB} character in certain modes. - -@node Inserting text at the beginning of each line, Underlining paragraphs, Changing the length of a Tab, Common requests -@section How do I insert at the beginning of every line? -@cindex Prefixing a region with some text -@cindex Prefix character, inserting in mail/news replies -@cindex Replies to mail/news, inserting a prefix character -@cindex @code{mail-yank-prefix} -@cindex Mail replies, inserting a prefix character -@cindex News replies, inserting a prefix character - -To do this to an entire buffer, type @kbd{M-< M-x replace-regexp -@key{RET} ^ @key{RET} your text @key{RET}}. - -To do this to a region, use @code{string-insert-rectangle}. -Set the mark (@kbd{C-@key{SPC}}) at the beginning of the first line you -want to prefix, move the cursor to last line to be prefixed, and type -@kbd{M-x string-insert-rectangle @key{RET}}. To do this for the whole -buffer, type @kbd{C-x h M-x string-insert-rectangle @key{RET}}. - -If you are trying to prefix a yanked mail message with @samp{>}, you -might want to set the variable @code{mail-yank-prefix}. In Message -buffers, you can even use @kbd{M-;} to cite yanked messages (@kbd{M-;} -runs the function @code{comment-region}, it is a general-purpose -mechanism to comment regions) (@pxref{Changing the included text prefix}). - -@node Underlining paragraphs, Forcing the cursor to remain in the same column, Inserting text at the beginning of each line, Common requests -@section How do I insert @samp{_^H} before each character in a region to get an underlined paragraph? -@cindex Underlining a region of text -@cindex @code{underline-region} - -Mark the region and then type @kbd{M-x underline-region @key{RET}}. - -@node Forcing the cursor to remain in the same column, Forcing Emacs to iconify itself, Underlining paragraphs, Common requests -@section How do I make Emacs behave like this: when I go up or down, the cursor should stay in the same column even if the line is too short? -@cindex @code{picture-mode} -@cindex Remaining in the same column, regardless of contents -@cindex Vertical movement in empty documents - -Use @kbd{M-x picture-mode}. - -See also the variable @code{track-eol} and the command -@code{set-goal-column} bound to @kbd{C-x C-n} -(@pxref{Moving Point, , , emacs, The GNU Emacs Manual}). - -@node Forcing Emacs to iconify itself, Using regular expressions, Forcing the cursor to remain in the same column, Common requests -@section How do I tell Emacs to iconify itself? -@cindex Iconification under the X Window System -@cindex X Window System and iconification -@cindex Suspending Emacs - -@kbd{C-z} iconifies Emacs when running under X and suspends Emacs -otherwise. @inforef{Frame Commands, Frame Commands, emacs}. - -@node Using regular expressions, Replacing text across multiple files, Forcing Emacs to iconify itself, Common requests -@section How do I use regexps (regular expressions) in Emacs? -@cindex Regexps -@cindex Regular expressions -@cindex Differences between Unix and Emacs regexps -@cindex Unix regexps, differences from Emacs -@cindex Text strings, putting regexps in - -@inforef{Regexp Backslash, Regexp Backslash, emacs}. - -The @code{or} operator is @samp{\|}, not @samp{|}, and the grouping operators -are @samp{\(} and @samp{\)}. Also, the string syntax for a backslash is -@samp{\\}. To specify a regular expression like @samp{xxx\(foo\|bar\)} -in a Lisp string, use @samp{xxx\\(foo\\|bar\\)}. - -Note the doubled backslashes! - -@itemize @bullet - -@item -Unlike in Unix @file{grep}, @file{sed}, etc., a complement character set -(@samp{[^...]}) can match a newline character (@key{LFD} a.k.a.@: -@kbd{C-j} a.k.a.@: @samp{\n}), unless newline is mentioned as one of the -characters not to match. - -@item -The character syntax regexps (e.g., @samp{\sw}) are not -meaningful inside character set regexps (e.g., @samp{[aeiou]}). (This -is actually typical for regexp syntax.) - -@end itemize - -@node Replacing text across multiple files, Documentation for etags, Using regular expressions, Common requests -@section How do I perform a replace operation across more than one file? -@cindex Replacing strings across files -@cindex Multiple files, replacing across -@cindex Files, replacing strings across multiple -@cindex Recursive search/replace operations - -As of Emacs 19.29, Dired mode (@kbd{M-x dired @key{RET}}, or @kbd{C-x -d}) supports the command @code{dired-do-query-replace} (@kbd{Q}), which -allows users to replace regular expressions in multiple files. - -You can use this command to perform search/replace operations on -multiple files by following the following steps: - -@itemize @bullet -@item -Assemble a list of files you want to operate on with either -@code{find-dired}, @code{find-name-dired} or @code{find-grep-dired}. - -@item -Mark all files in the resulting Dired buffer using @kbd{t}. - -@item -Use @kbd{Q} to start a @code{query-replace-regexp} session on the marked -files. - -@item -To accept all replacements in each file, hit @kbd{!}. -@end itemize - -Another way to do the same thing is to use the ``tags'' feature of -Emacs: it includes the command @code{tags-query-replace} which performs -a query-replace across all the files mentioned in the @file{TAGS} file. -@inforef{Tags Search, Tags Search, emacs}. - -@node Documentation for etags, Disabling backups, Replacing text across multiple files, Common requests -@section Where is the documentation for @code{etags}? -@cindex Documentation for @code{etags} -@cindex @code{etags}, documentation for - -The @code{etags} man page should be in the same place as the -@code{emacs} man page. - -Quick command-line switch descriptions are also available. For example, -@samp{etags -H}. - -@node Disabling backups, Disabling auto-save-mode, Documentation for etags, Common requests -@section How do I disable backup files? -@cindex Backups, disabling -@cindex Disabling backups - -You probably don't want to do this, since backups are useful, especially -when something goes wrong. - -To avoid seeing backup files (and other ``uninteresting'' files) in Dired, -load @code{dired-x} by adding the following to your @file{.emacs} file: - -@lisp -(add-hook 'dired-load-hook - (lambda () - (load "dired-x"))) -@end lisp - -With @code{dired-x} loaded, @kbd{M-o} toggles omitting in each dired buffer. -You can make omitting the default for new dired buffers by putting the -following in your @file{.emacs}: - -@lisp -(add-hook 'dired-mode-hook 'dired-omit-toggle) -@end lisp - -If you're tired of seeing backup files whenever you do an @samp{ls} at -the Unix shell, try GNU @code{ls} with the @samp{-B} option. GNU -@code{ls} is part of the GNU Fileutils package, available from -@samp{ftp.gnu.org} and its mirrors (@pxref{Current GNU distributions}). - -To disable or change the way backups are made, @inforef{Backup Names, , -emacs}. - -@cindex Backup files in a single directory -Beginning with Emacs 21.1, you can control where Emacs puts backup files -by customizing the variable @code{backup-directory-alist}. This -variable's value specifies that files whose names match specific patters -should have their backups put in certain directories. A typical use is -to add the element @code{("." . @var{dir})} to force Emacs to put -@strong{all} backup files in the directory @file{dir}. - -@node Disabling auto-save-mode, Going to a line by number, Disabling backups, Common requests -@section How do I disable @code{auto-save-mode}? -@cindex Disabling @code{auto-save-mode} -@cindex Auto-saving -@cindex Saving at frequent intervals - -You probably don't want to do this, since auto-saving is useful, -especially when Emacs or your computer crashes while you are editing a -document. - -Instead, you might want to change the variable -@code{auto-save-interval}, which specifies how many keystrokes Emacs -waits before auto-saving. Increasing this value forces Emacs to wait -longer between auto-saves, which might annoy you less. - -You might also want to look into Sebastian Kremer's @code{auto-save} -package (@pxref{Packages that do not come with Emacs}). This -package also allows you to place all auto-save files in one directory, -such as @file{/tmp}. - -To disable or change how @code{auto-save-mode} works, @inforef{Auto -Save, , emacs}. - -@node Going to a line by number, Modifying pull-down menus, Disabling auto-save-mode, Common requests -@section How can I go to a certain line given its number? -@cindex Going to a line by number -@cindex Compilation error messages -@cindex Recompilation - -Are you sure you indeed need to go to a line by its number? Perhaps all -you want is to display a line in your source file for which a compiler -printed an error message? If so, compiling from within Emacs using the -@kbd{M-x compile} and @kbd{M-x recompile} commands is a much more -effective way of doing that. Emacs automatically intercepts the compile -error messages, inserts them into a special buffer called -@code{*compilation*}, and lets you visit the locus of each message in -the source. Type @kbd{C-x `} to step through the offending lines one by -one (starting with Emacs 22, you can also use @kbd{M-g M-p} and -@kbd{M-g M-n} to go to the previous and next matches directly). Click -@kbd{Mouse-2} or press @key{RET} on a message text in the -@code{*compilation*} buffer to go to the line whose number is mentioned -in that message. - -But if you indeed need to go to a certain text line, type @kbd{M-g M-g} -(which is the default binding of the @code{goto-line} function starting -with Emacs 22). Emacs will prompt you for the number of the line and go -to that line. - -You can do this faster by invoking @code{goto-line} with a numeric -argument that is the line's number. For example, @kbd{C-u 286 M-g M-g} -will jump to line number 286 in the current buffer. - -@node Modifying pull-down menus, Deleting menus and menu options, Going to a line by number, Common requests -@section How can I create or modify new pull-down menu options? -@cindex Pull-down menus, creating or modifying -@cindex Menus, creating or modifying -@cindex Creating new menu options -@cindex Modifying pull-down menus -@cindex Menus and keymaps -@cindex Keymaps and menus - -Each menu title (e.g., @samp{File}, @samp{Edit}, @samp{Buffers}) -represents a local or global keymap. Selecting a menu title with the -mouse displays that keymap's non-@code{nil} contents in the form of a menu. - -So to add a menu option to an existing menu, all you have to do is add a -new definition to the appropriate keymap. Adding a @samp{Forward Word} -item to the @samp{Edit} menu thus requires the following Lisp code: - -@lisp -(define-key global-map - [menu-bar edit forward] - '("Forward word" . forward-word)) -@end lisp - -@noindent -The first line adds the entry to the global keymap, which includes -global menu bar entries. Replacing the reference to @code{global-map} -with a local keymap would add this menu option only within a particular -mode. - -The second line describes the path from the menu-bar to the new entry. -Placing this menu entry underneath the @samp{File} menu would mean -changing the word @code{edit} in the second line to @code{file}. - -The third line is a cons cell whose first element is the title that will -be displayed, and whose second element is the function that will be -called when that menu option is invoked. - -To add a new menu, rather than a new option to an existing menu, we must -define an entirely new keymap: - -@lisp -(define-key global-map [menu-bar words] - (cons "Words" (make-sparse-keymap "Words"))) -@end lisp - -The above code creates a new sparse keymap, gives it the name -@samp{Words}, and attaches it to the global menu bar. Adding the -@samp{Forward Word} item to this new menu would thus require the -following code: - -@lisp -(define-key global-map - [menu-bar words forward] - '("Forward word" . forward-word)) -@end lisp - -@noindent -Note that because of the way keymaps work, menu options are displayed -with the more recently defined items at the top. Thus if you were to -define menu options @samp{foo}, @samp{bar}, and @samp{baz} (in that -order), the menu option @samp{baz} would appear at the top, and -@samp{foo} would be at the bottom. - -One way to avoid this problem is to use the function @code{define-key-after}, -which works the same as @code{define-key}, but lets you modify where items -appear. The following Lisp code would insert the @samp{Forward Word} -item in the @samp{Edit} menu immediately following the @samp{Undo} item: - -@lisp -(define-key-after - (lookup-key global-map [menu-bar edit]) - [forward] - '("Forward word" . forward-word) - 'undo) -@end lisp - -Note how the second and third arguments to @code{define-key-after} are -different from those of @code{define-key}, and that we have added a new -(final) argument, the function after which our new key should be -defined. - -To move a menu option from one position to another, simply evaluate -@code{define-key-after} with the appropriate final argument. - -More detailed information---and more examples of how to create and -modify menu options---are in the @cite{Emacs Lisp Reference Manual}, under -``Menu Keymaps.'' (@xref{Emacs Lisp documentation}, for information on -this manual.) - -@node Deleting menus and menu options, Turning on syntax highlighting, Modifying pull-down menus, Common requests -@section How do I delete menus and menu options? -@cindex Deleting menus and menu options -@cindex Menus, deleting - -The simplest way to remove a menu is to set its keymap to @samp{nil}. -For example, to delete the @samp{Words} menu (@pxref{Modifying pull-down -menus}), use: - -@lisp -(define-key global-map [menu-bar words] nil) -@end lisp - -Similarly, removing a menu option requires redefining a keymap entry to -@code{nil}. For example, to delete the @samp{Forward word} menu option -from the @samp{Edit} menu (we added it in @ref{Modifying pull-down -menus}), use: - -@lisp -(define-key global-map [menu-bar edit forward] nil) -@end lisp - -@node Turning on syntax highlighting, Scrolling only one line, Deleting menus and menu options, Common requests -@section How do I turn on syntax highlighting? -@cindex Syntax highlighting -@cindex @code{font-lock-mode} -@cindex Highlighting based on syntax -@cindex Colorizing text -@cindex FAQ, @code{font-lock-mode} - -@code{font-lock-mode} is the standard way to have Emacs perform syntax -highlighting in the current buffer. It is enabled by default in Emacs -22.1 and later. - -With @code{font-lock-mode} turned on, different types of text will -appear in different colors. For instance, in a programming mode, -variables will appear in one face, keywords in a second, and comments in -a third. - -@cindex hilit19 is deprecated -Earlier versions of Emacs supported hilit19, a similar package. Use of -hilit19 is now considered non-standard, although @file{hilit19.el} comes -with the stock Emacs distribution. It is no longer maintained. - -To turn @code{font-lock-mode} off within an existing buffer, use -@kbd{M-x font-lock-mode @key{RET}}. - -In Emacs 21 and earlier versions, you could use the following code in -your @file{.emacs} file to turn on @code{font-lock-mode} globally: - -@lisp -(global-font-lock-mode 1) -@end lisp - -Highlighting a buffer with @code{font-lock-mode} can take quite a while, -and cause an annoying delay in display, so several features exist to -work around this. - -@cindex Just-In-Time syntax highlighting -In Emacs 21 and later, turning on @code{font-lock-mode} automatically -activates the new @dfn{Just-In-Time fontification} provided by -@code{jit-lock-mode}. @code{jit-lock-mode} defers the fontification of -portions of buffer until you actually need to see them, and can also -fontify while Emacs is idle. This makes display of the visible portion -of a buffer almost instantaneous. For details about customizing -@code{jit-lock-mode}, type @kbd{C-h f jit-lock-mode @key{RET}}. - -@cindex Levels of syntax highlighting -@cindex Decoration level, in @code{font-lock-mode} -In versions of Emacs before 21, different levels of decoration are -available, from slight to gaudy. More decoration means you need to wait -more time for a buffer to be fontified (or a faster machine). To -control how decorated your buffers should become, set the value of -@code{font-lock-maximum-decoration} in your @file{.emacs} file, with a -@code{nil} value indicating default (usually minimum) decoration, and a -@code{t} value indicating the maximum decoration. For the gaudiest -possible look, then, include the line - -@lisp -(setq font-lock-maximum-decoration t) -@end lisp - -@noindent -in your @file{.emacs} file. You can also set this variable such that -different modes are highlighted in a different ways; for more -information, see the documentation for -@code{font-lock-maximum-decoration} with @kbd{C-h v} (or @kbd{M-x -describe-variable @key{RET}}). - -Also see the documentation for the function @code{font-lock-mode}, -available by typing @kbd{C-h f font-lock-mode} (@kbd{M-x -describe-function @key{RET} font-lock-mode @key{RET}}). - -To print buffers with the faces (i.e., colors and fonts) intact, use -@kbd{M-x ps-print-buffer-with-faces} or @kbd{M-x -ps-print-region-with-faces}. You will need a way to send text to a -PostScript printer, or a PostScript interpreter such as Ghostscript; -consult the documentation of the variables @code{ps-printer-name}, -@code{ps-lpr-command}, and @code{ps-lpr-switches} for more details. - -@node Scrolling only one line, Editing MS-DOS files, Turning on syntax highlighting, Common requests -@section How can I force Emacs to scroll only one line when I move past the bottom of the screen? -@cindex Scrolling only one line -@cindex Reducing the increment when scrolling - -Customize the @code{scroll-conservatively} variable with @kbd{M-x -customize-variable @key{RET} scroll-conservatively @key{RET}} and set it -to a large value like, say, 10000. For an explanation of what this -means, @inforef{Auto Scrolling, Auto Scrolling, emacs}. - -Alternatively, use the following Lisp form in your @file{.emacs}: - -@lisp -(setq scroll-conservatively most-positive-fixnum) -@end lisp - -@node Editing MS-DOS files, Filling paragraphs with a single space, Scrolling only one line, Common requests -@section How can I edit MS-DOS files using Emacs? -@cindex Editing MS-DOS files -@cindex MS-DOS files, editing -@cindex Microsoft files, editing -@cindex Windows files, editing - -As of Emacs 20, detection and handling of MS-DOS (and Windows) files is -performed transparently. You can open MS-DOS files on a Unix system, -edit it, and save it without having to worry about the file format. - -When editing an MS-DOS style file, the mode line will indicate that it -is a DOS file. On Unix and GNU/Linux systems, and also on a Macintosh, -the string @samp{(DOS)} will appear near the left edge of the mode line; -on DOS and Windows, where the DOS end-of-line (EOL) format is the -default, a backslash (@samp{\}) will appear in the mode line. - -If you are running a version of Emacs before 20.1, get @code{crypt++} -(@pxref{Packages that do not come with Emacs}). Among other things, -@code{crypt++} transparently modifies MS-DOS files as they are loaded -and saved, allowing you to ignore the different conventions that Unix -and MS-DOS have for delineating the end of a line. - -@node Filling paragraphs with a single space, Escape sequences in shell output, Editing MS-DOS files, Common requests -@section How can I tell Emacs to fill paragraphs with a single space after each period? -@cindex One space following periods -@cindex Single space following periods -@cindex Periods, one space following - -Add the following line to your @file{.emacs} file: - -@lisp -(setq sentence-end-double-space nil) -@end lisp - -@node Escape sequences in shell output, Fullscreen mode on MS-Windows, Filling paragraphs with a single space, Common requests -@section Why these strange escape sequences from @code{ls} from the Shell mode? -@cindex Escape sequences in @code{ls} output -@cindex @code{ls} in Shell mode - -This happens because @code{ls} is aliased to @samp{ls --color} in your -shell init file. You have two alternatives to solve this: - -@itemize @bullet -@item -Make the alias conditioned on the @code{EMACS} variable in the -environment. When Emacs runs a subsidiary shell, it exports the -@code{EMACS} variable to that shell, with value equal to the absolute -file name of Emacs. You can -unalias @code{ls} when that happens, thus limiting the alias to your -interactive sessions. - -@item -Install the @code{ansi-color} package (bundled with Emacs 21.1 and -later), which converts these ANSI escape sequences into colors. -@end itemize - -@node Fullscreen mode on MS-Windows, , Escape sequences in shell output, Common requests -@section How can I start Emacs in fullscreen mode on MS-Windows? -@cindex Maximize frame -@cindex Fullscreen mode - -Use the function @code{w32-send-sys-command}. For example, you can -put the following in your @file{.emacs} file: - -@lisp -(add-hook 'term-setup-hook - #'(lambda () (w32-send-sys-command ?\xF030))) -@end lisp - -To avoid the slightly distracting visual effect of Emacs starting with -its default frame size and then growing to fullscreen, you can add an -@samp{Emacs.Geometry} entry to the Windows registry settings (see -@pxref{(emacs)X Resources}). - -To compute the correct values for width and height, first maximize the -Emacs frame and then evaluate @code{(frame-height)} and -@code{(frame-width)} with @kbd{M-:}. - -@c ------------------------------------------------------------ -@node Bugs and problems, Compiling and installing Emacs, Common requests, Top -@chapter Bugs and problems -@cindex Bugs and problems - -The Emacs manual lists some common kinds of trouble users could get -into, see @ref{Lossage, , Dealing with Emacs Trouble, emacs, The GNU -Emacs Manual}, so you might look there if the problem you encounter -isn't described in this chapter. If you decide you've discovered a bug, -see @ref{Bugs, , Reporting Bugs, emacs, The GNU Emacs Manual}, for -instructions how to do that. - -The file @file{etc/PROBLEMS} in the Emacs distribution lists various -known problems with building and using Emacs on specific platforms; -type @kbd{C-h C-e} to read it. - -@menu -* Problems with very large files:: -* ^M in the shell buffer:: -* Shell process exits abnormally:: -* Problems with Shell Mode on MS-Windows:: -* Termcap/Terminfo entries for Emacs:: -* Spontaneous entry into isearch-mode:: -* Problems talking to certain hosts:: -* Errors with init files:: -* Emacs ignores X resources:: -* Emacs ignores frame parameters:: -* Emacs takes a long time to visit files:: -* Editing files with $ in the name:: -* Shell mode loses the current directory:: -* Security risks with Emacs:: -* Dired claims that no file is on this line:: -@end menu - -@node Problems with very large files, ^M in the shell buffer, Bugs and problems, Bugs and problems -@section Does Emacs have problems with files larger than 8 megabytes? -@cindex Very large files, opening -@cindex Large files, opening -@cindex Opening very large files -@cindex Maximum file size -@cindex Files, maximum size - -Old versions (i.e., anything before 19.29) of Emacs had problems editing -files larger than 8 megabytes. In versions 19.29 and later, the maximum -buffer size is at least 2^27-1, or 134,217,727 bytes, or 132 MBytes. -And in Emacs 22, the maximum buffer size has been increased to -268,435,455 bytes (or 256 MBytes) on 32-bit machines. - -@node ^M in the shell buffer, Shell process exits abnormally, Problems with very large files, Bugs and problems -@section How do I get rid of @samp{^M} or echoed commands in my shell buffer? -@cindex Shell buffer, echoed commands and @samp{^M} in -@cindex Echoed commands in @code{shell-mode} - -Try typing @kbd{M-x shell-strip-ctrl-m @key{RET}} while in @code{shell-mode} to -make them go away. If that doesn't work, you have several options: - -For @code{tcsh}, put this in your @file{.cshrc} (or @file{.tcshrc}) -file: - -@example -if ($?EMACS) then - if ("$EMACS" =~ /*) then - if ($?tcsh) unset edit - stty nl - endif -endif -@end example - -Or put this in your @file{.emacs_tcsh} or @file{~/.emacs.d/init_tcsh.sh} file: - -@example -unset edit -stty nl -@end example - -Alternatively, use @code{csh} in your shell buffers instead of -@code{tcsh}. One way is: - -@lisp -(setq explicit-shell-file-name "/bin/csh") -@end lisp - -@noindent -and another is to do this in your @file{.cshrc} (or @file{.tcshrc}) -file: - -@example -setenv ESHELL /bin/csh -@end example - -@noindent -(You must start Emacs over again with the environment variable properly -set for this to take effect.) - -You can also set the @code{ESHELL} environment variable in Emacs Lisp -with the following Lisp form, - -@lisp -(setenv "ESHELL" "/bin/csh") -@end lisp - -The above solutions try to prevent the shell from producing the -@samp{^M} characters in the first place. If this is not possible -(e.g., if you use a Windows shell), you can get Emacs to remove these -characters from the buffer by adding this to your @file{.emacs} init -file: - -@smalllisp -(add-hook 'comint-output-filter-functions 'shell-strip-ctrl-m) -@end smalllisp - -On a related note: if your shell is echoing your input line in the shell -buffer, you might want to customize the @code{comint-process-echoes} -variable in your shell buffers, or try the following command in your -shell start-up file: - -@example -stty -icrnl -onlcr -echo susp ^Z -@end example - -@node Shell process exits abnormally, Problems with Shell Mode on MS-Windows, ^M in the shell buffer, Bugs and problems -@section Why do I get ``Process shell exited abnormally with code 1''? -@cindex Abnormal exits from @code{shell-mode} -@cindex @code{shell-mode} exits -@cindex Process shell exited - -The most likely reason for this message is that the @samp{env} program -is not properly installed. Compile this program for your architecture, -and install it with @samp{a+x} permission in the architecture-dependent -Emacs program directory. (You can find what this directory is at your -site by inspecting the value of the variable @code{exec-directory} by -typing @kbd{C-h v exec-directory @key{RET}}.) - -You should also check for other programs named @samp{env} in your path -(e.g., SunOS has a program named @file{/usr/bin/env}). We don't -understand why this can cause a failure and don't know a general -solution for working around the problem in this case. - -The @samp{make clean} command will remove @samp{env} and other vital -programs, so be careful when using it. - -It has been reported that this sometimes happened when Emacs was started -as an X client from an xterm window (i.e., had a controlling tty) but the -xterm was later terminated. - -See also @samp{PROBLEMS} (in the @file{etc} subdirectory of the -top-level directory when you unpack the Emacs source) for other -possible causes of this message. - -@node Problems with Shell Mode on MS-Windows, Termcap/Terminfo entries for Emacs, Shell process exits abnormally, Bugs and problems -@section Why do I get an error message when I try to run @kbd{M-x shell}? - -@cindex Shell Mode, and MS-Windows -@cindex @code{explicit-shell-file-name} -On MS-Windows, this might happen because Emacs tries to look for the -shell in a wrong place. The default file name @file{/bin/sh} is -usually incorrect for non-Unix systems. If you know where your shell -executable is, set the variable @code{explicit-shell-file-name} in -your @file{.emacs} file to point to its full file name, like this: - -@lisp -(setq explicit-shell-file-name "d:/shells/bash.exe") -@end lisp - -If you don't know what shell does Emacs use, try the @kbd{M-!} -command; if that works, put the following line into your -@file{.emacs}: - -@lisp -(setq explicit-shell-file-name shell-file-name) -@end lisp - -@cindex Antivirus programs, and Shell Mode -Some people have trouble with Shell Mode because of intrusive -antivirus software; disabling the resident antivirus program solves -the problems in those cases. - -@node Termcap/Terminfo entries for Emacs, Spontaneous entry into isearch-mode, Problems with Shell Mode on MS-Windows, Bugs and problems -@section Where is the termcap/terminfo entry for terminal type @samp{emacs}? -@cindex Termcap -@cindex Terminfo -@cindex Emacs entries for termcap/terminfo - -The termcap entry for terminal type @samp{emacs} is ordinarily put in -the @samp{TERMCAP} environment variable of subshells. It may help in -certain situations (e.g., using rlogin from shell buffer) to add an -entry for @samp{emacs} to the system-wide termcap file. Here is a -correct termcap entry for @samp{emacs}: - -@example -emacs:tc=unknown: -@end example - -To make a terminfo entry for @samp{emacs}, use @code{tic} or -@code{captoinfo}. You need to generate -@file{/usr/lib/terminfo/e/emacs}. It may work to simply copy -@file{/usr/lib/terminfo/d/dumb} to @file{/usr/lib/terminfo/e/emacs}. - -Having a termcap/terminfo entry will not enable the use of full screen -programs in shell buffers. Use @kbd{M-x terminal-emulator} for that -instead. - -A workaround to the problem of missing termcap/terminfo entries is to -change terminal type @samp{emacs} to type @samp{dumb} or @samp{unknown} -in your shell start up file. @code{csh} users could put this in their -@file{.cshrc} files: - -@example -if ("$term" == emacs) set term=dumb -@end example - -@node Spontaneous entry into isearch-mode, Problems talking to certain hosts, Termcap/Terminfo entries for Emacs, Bugs and problems -@section Why does Emacs spontaneously start displaying @samp{I-search:} and beeping? -@cindex Spontaneous entry into isearch-mode -@cindex isearch-mode, spontaneous entry into -@cindex Beeping without obvious reason - -Your terminal (or something between your terminal and the computer) is -sending @kbd{C-s} and @kbd{C-q} for flow control, and Emacs is receiving -these characters and interpreting them as commands. (The @kbd{C-s} -character normally invokes the @code{isearch-forward} command.) For -possible solutions, see @ref{Handling C-s and C-q with flow control}. - -@node Problems talking to certain hosts, Errors with init files, Spontaneous entry into isearch-mode, Bugs and problems -@section Why can't Emacs talk to certain hosts (or certain hostnames)? -@cindex Hosts, Emacs cannot talk to -@cindex @code{gethostbyname}, problematic version - -The problem may be that Emacs is linked with a wimpier version of -@code{gethostbyname} than the rest of the programs on the machine. This -is often manifested as a message on startup of ``X server not responding. -Check your @samp{DISPLAY} environment variable.'' or a message of -``Unknown host'' from @code{open-network-stream}. - -On a Sun, this may be because Emacs had to be linked with the static C -library. The version of @code{gethostbyname} in the static C library -may only look in @file{/etc/hosts} and the NIS (YP) maps, while the -version in the dynamic C library may be smart enough to check DNS in -addition to or instead of NIS. On a Motorola Delta running System V -R3.6, the version of @code{gethostbyname} in the standard library works, -but the one that works with NIS doesn't (the one you get with -linet). -Other operating systems have similar problems. - -Try these options: - -@itemize @bullet - -@item -Explicitly add the host you want to communicate with to @file{/etc/hosts}. - -@item -Relink Emacs with this line in @file{src/config.h}: - -@example -#define LIBS_SYSTEM -lresolv -@end example - -@item -Replace @code{gethostbyname} and friends in @file{libc.a} with more -useful versions such as the ones in @file{libresolv.a}. Then relink -Emacs. - -@item -If you are actually running NIS, make sure that @code{ypbind} is -properly told to do DNS lookups with the correct command line switch. - -@end itemize - -@node Errors with init files, Emacs ignores X resources, Problems talking to certain hosts, Bugs and problems -@section Why does Emacs say @samp{Error in init file}? -@cindex Error in @file{.emacs} -@cindex Error in init file -@cindex Init file, errors in -@cindex @file{.emacs} file, errors in -@cindex Debugging @file{.emacs} file - -An error occurred while loading either your @file{.emacs} file or the -system-wide file @file{lisp/default.el}. Emacs 21.1 and later pops the -@file{*Messages*} buffer, and puts there some additional information -about the error, to provide some hints for debugging. - -For information on how to debug your @file{.emacs} file, see -@ref{Debugging a customization file}. - -It may be the case that you need to load some package first, or use a -hook that will be evaluated after the package is loaded. A common case -of this is explained in @ref{Terminal setup code works after Emacs has -begun}. - -@node Emacs ignores X resources, Emacs ignores frame parameters, Errors with init files, Bugs and problems -@section Why does Emacs ignore my X resources (my .Xdefaults file)? -@cindex X resources being ignored -@cindex Ignored X resources -@cindex @file{.Xdefaults} - -As of version 19, Emacs searches for X resources in the files specified -by the following environment variables: - -@itemize @bullet - -@item @code{XFILESEARCHPATH} -@item @code{XUSERFILESEARCHPATH} -@item @code{XAPPLRESDIR} - -@end itemize - -This emulates the functionality provided by programs written using the -Xt toolkit. - -@code{XFILESEARCHPATH} and @code{XUSERFILESEARCHPATH} should be a list -of file names separated by colons. @code{XAPPLRESDIR} should be a list -of directory names separated by colons. - -Emacs searches for X resources: - -@enumerate - -@item -specified on the command line, with the @samp{-xrm RESOURCESTRING} option, - -@item -then in the value of the @samp{XENVIRONMENT} environment variable, - -@itemize @minus - -@item -or if that is unset, in the file named -@file{~/.Xdefaults-@var{hostname}} if it exists (where @var{hostname} is -the name of the machine Emacs is running on), - -@end itemize - -@item -then in the screen-specific and server-wide resource properties provided -by the server, - -@itemize @minus - -@item -or if those properties are unset, in the file named @file{~/.Xdefaults} -if it exists, - -@end itemize - -@item -then in the files listed in @samp{XUSERFILESEARCHPATH}, - -@itemize @minus - -@item -or in files named @file{@var{lang}/Emacs} in directories listed in -@samp{XAPPLRESDIR} (where @var{lang} is the value of the @code{LANG} -environment variable), if the @samp{LANG} environment variable is set, -@item -or in files named Emacs in the directories listed in @samp{XAPPLRESDIR} -@item -or in @file{~/@var{lang}/Emacs} (if the @code{LANG} environment variable -is set), -@item -or in @file{~/Emacs}, - -@end itemize - -@item -then in the files listed in @code{XFILESEARCHPATH}. - -@end enumerate - -@node Emacs ignores frame parameters, Emacs takes a long time to visit files, Emacs ignores X resources, Bugs and problems -@section Why don't my customizations of the frame parameters work? -@cindex Frame parameters - -This probably happens because you have set the frame parameters in the -variable @code{initial-frame-alist}. That variable holds parameters -used only for the first frame created when Emacs starts. To customize -the parameters of all frames, change the variable -@code{default-frame-alist} instead. - -These two variables exist because many users customize the initial frame -in a special way. For example, you could determine the position and -size of the initial frame, but would like to control the geometry of the -other frames by individually positioning each one of them. - - -@node Emacs takes a long time to visit files, Editing files with $ in the name, Emacs ignores frame parameters, Bugs and problems -@section Why does Emacs take 20 seconds to visit a file? -@cindex Visiting files takes a long time -@cindex Delay when visiting files -@cindex Files, take a long time to visit - -Old versions of Emacs (i.e., versions before Emacs 20.x) often -encountered this when the master lock file, @file{!!!SuperLock!!!}, has -been left in the lock directory somehow. Delete it. - -@email{meuer@@geom.umn.edu, Mark Meuer} says that NeXT NFS has a bug -where an exclusive create succeeds but returns an error status. This -can cause the same problem. Since Emacs's file locking doesn't work -over NFS anyway, the best solution is to recompile Emacs with -@code{CLASH_DETECTION} undefined. - -@node Editing files with $ in the name, Shell mode loses the current directory, Emacs takes a long time to visit files, Bugs and problems -@section How do I edit a file with a @samp{$} in its name? -@cindex Editing files with @samp{$} in the name -@cindex @samp{$} in file names -@cindex File names containing @samp{$}, editing - -When entering a file name in the minibuffer, Emacs will attempt to expand -a @samp{$} followed by a word as an environment variable. To suppress -this behavior, type @kbd{$$} instead. - -@node Shell mode loses the current directory, Security risks with Emacs, Editing files with $ in the name, Bugs and problems -@section Why does shell mode lose track of the shell's current directory? -@cindex Current directory and @code{shell-mode} -@cindex @code{shell-mode} and current directory -@cindex Directory, current in @code{shell-mode} - -Emacs has no way of knowing when the shell actually changes its -directory. This is an intrinsic limitation of Unix. So it tries to -guess by recognizing @samp{cd} commands. If you type @kbd{cd} followed -by a directory name with a variable reference (@kbd{cd $HOME/bin}) or -with a shell metacharacter (@kbd{cd ../lib*}), Emacs will fail to -correctly guess the shell's new current directory. A huge variety of -fixes and enhancements to shell mode for this problem have been written -to handle this problem (@pxref{Finding a package with particular -functionality}). - -You can tell Emacs the shell's current directory with the command -@kbd{M-x dirs}. - -@node Security risks with Emacs, Dired claims that no file is on this line, Shell mode loses the current directory, Bugs and problems -@section Are there any security risks in Emacs? -@cindex Security with Emacs -@cindex @samp{movemail} and security -@cindex @code{file-local-variable} and security -@cindex Synthetic X events and security -@cindex X events and security - -@itemize @bullet - -@item -The @file{movemail} incident. (No, this is not a risk.) - -In his book @cite{The Cuckoo's Egg}, Cliff Stoll describes this in -chapter 4. The site at LBL had installed the @file{/etc/movemail} -program setuid root. (As of version 19, @file{movemail} is in your -architecture-specific directory; type @kbd{C-h v exec-directory -@key{RET}} to see what it is.) Since @code{movemail} had not been -designed for this situation, a security hole was created and users could -get root privileges. - -@code{movemail} has since been changed so that this security hole will -not exist, even if it is installed setuid root. However, -@code{movemail} no longer needs to be installed setuid root, which -should eliminate this particular risk. - -We have heard unverified reports that the 1988 Internet worm took -advantage of this configuration problem. - -@item -The @code{file-local-variable} feature. (Yes, a risk, but easy to -change.) - -There is an Emacs feature that allows the setting of local values for -variables when editing a file by including specially formatted text near -the end of the file. This feature also includes the ability to have -arbitrary Emacs Lisp code evaluated when the file is visited. -Obviously, there is a potential for Trojan horses to exploit this -feature. - -As of Emacs 22, Emacs has a list of local variables that are known to -be safe to set. If a file tries to set any variable outside this -list, it asks the user to confirm whether the variables should be set. -You can also tell Emacs whether to allow the evaluation of Emacs Lisp -code found at the bottom of files by setting the variable -@code{enable-local-eval}. - -For more information, @inforef{File Variables, File Variables, emacs}. - -@item -Synthetic X events. (Yes, a risk; use @samp{MIT-MAGIC-COOKIE-1} or -better.) - -Emacs accepts synthetic X events generated by the @code{SendEvent} -request as though they were regular events. As a result, if you are -using the trivial host-based authentication, other users who can open X -connections to your X workstation can make your Emacs process do -anything, including run other processes with your privileges. - -The only fix for this is to prevent other users from being able to open -X connections. The standard way to prevent this is to use a real -authentication mechanism, such as @samp{MIT-MAGIC-COOKIE-1}. If using -the @code{xauth} program has any effect, then you are probably using -@samp{MIT-MAGIC-COOKIE-1}. Your site may be using a superior -authentication method; ask your system administrator. - -If real authentication is not a possibility, you may be satisfied by -just allowing hosts access for brief intervals while you start your X -programs, then removing the access. This reduces the risk somewhat by -narrowing the time window when hostile users would have access, but -@emph{does not eliminate the risk}. - -On most computers running Unix and X, you enable and disable -access using the @code{xhost} command. To allow all hosts access to -your X server, use - -@example -xhost + -@end example - -@noindent -at the shell prompt, which (on an HP machine, at least) produces the -following message: - -@example -access control disabled, clients can connect from any host -@end example - -To deny all hosts access to your X server (except those explicitly -allowed by name), use - -@example -xhost - -@end example - -On the test HP computer, this command generated the following message: - -@example -access control enabled, only authorized clients can connect -@end example - -@end itemize - -@node Dired claims that no file is on this line, , Security risks with Emacs, Bugs and problems -@section Dired says, @samp{no file on this line} when I try to do something. -@cindex Dired does not see a file - -@c FIXME: I think this is fixed in Emacs 21, but I didn't have time to -@c check. -Chances are you're using a localized version of Unix that doesn't use US -date format in dired listings. You can check this by looking at dired -listings or by typing @kbd{ls -l} to a shell and looking at the dates that -come out. - -Dired uses a regular expression to find the beginning of a file name. -In a long Unix-style directory listing (@samp{ls -l}), the file name -starts after the date. The regexp has thus been written to look for the -date, the format of which can vary on non-US systems. - -There are two approaches to solving this. The first one involves -setting things up so that @samp{ls -l} outputs US date format. This can -be done by setting the locale. See your OS manual for more information. - -The second approach involves changing the regular expression used by -dired, @code{directory-listing-before-filename-regexp}. - -@c ------------------------------------------------------------ -@node Compiling and installing Emacs, Finding Emacs and related packages, Bugs and problems, Top -@chapter Compiling and installing Emacs -@cindex Compiling and installing Emacs - -@menu -* Installing Emacs:: -* Updating Emacs:: -* Problems building Emacs:: -* Linking with -lX11 fails:: -@end menu - -@node Installing Emacs, Updating Emacs, Compiling and installing Emacs, Compiling and installing Emacs -@section How do I install Emacs? -@cindex Installing Emacs -@cindex Unix systems, installing Emacs on -@cindex Downloading and installing Emacs -@cindex Retrieving and installing Emacs -@cindex Building Emacs from source -@cindex Source code, building Emacs from -@cindex Unpacking and installing Emacs - -This answer is meant for users of Unix and Unix-like systems. Users of -other operating systems should see the series of questions beginning -with @ref{Emacs for MS-DOS}, which describe where to get non-Unix source -and binaries, and how to install Emacs on those systems. - -For Unix and Unix-like systems, the easiest way is often to compile it -from scratch. You will need: - -@itemize @bullet - -@item -Emacs sources. @xref{Current GNU distributions}, for a list of ftp sites -that make them available. On @file{ftp.gnu.org}, the main GNU -distribution site, sources are available as - -@uref{ftp://ftp.gnu.org/pub/gnu/emacs/emacs-@value{VER}.tar.gz} - -The above will obviously change as new versions of Emacs come out. For -instance, when Emacs 22.42 is released, it will most probably be -available as - -@uref{ftp://ftp.gnu.org/pub/gnu/emacs/emacs-22.42.tar.gz} - -Again, you should use one of the GNU mirror sites (see @ref{Current GNU -distributions}, and adjust the URL accordingly) so as to reduce load on -@file{ftp.gnu.org}. - -@item -@code{gzip}, the GNU compression utility. You can get @code{gzip} via -anonymous ftp at mirrors of @file{ftp.gnu.org} sites; it should compile -and install without much trouble on most systems. Once you have -retrieved the Emacs sources, you will probably be able to uncompress -them with the command - -@example -gunzip --verbose emacs-@value{VER}.tar.gz -@end example - -@noindent -changing the Emacs version (@value{VER}), as necessary. Once -@code{gunzip} has finished doing its job, a file by the name of -@file{emacs-@value{VER}.tar} should be in your build directory. - -@item -@code{tar}, the @dfn{tape archiving} program, which moves multiple files -into and out of archive files, or @dfn{tarfiles}. All of the files -comprising the Emacs source come in a single tarfile, and must be -extracted using @code{tar} before you can build Emacs. Typically, the -extraction command would look like - -@example -tar -xvvf emacs-@value{VER}.tar -@end example - -@noindent -The @samp{x} indicates that we want to extract files from this tarfile, -the two @samp{v}s force verbose output, and the @samp{f} tells -@code{tar} to use a disk file, rather than one on the tape drive. - -If you're using GNU @code{tar} (available at mirrors of -@file{ftp.gnu.org}), you can combine this step and the previous one by -using the command - -@example -tar -zxvvf emacs-@value{VER}.tar.gz -@end example - -@noindent -The additional @samp{z} at the beginning of the options list tells GNU -@code{tar} to uncompress the file with @code{gunzip} before extracting -the tarfile's components. - -@end itemize - -At this point, the Emacs sources (all 70+ megabytes of them) should be -sitting in a directory called @file{emacs-@value{VER}}. On most common -Unix and Unix-like systems, you should be able to compile Emacs (with X -Window system support) with the following commands: - -@example -cd emacs-@value{VER} # change directory to emacs-@value{VER} -./configure # configure Emacs for your particular system -make # use Makefile to build components, then Emacs -@end example - -If the @code{make} completes successfully, the odds are fairly good that -the build has gone well. (@xref{Problems building Emacs}, if you weren't -successful.) - -By default, Emacs is installed in the following directories: - -@table @file -@item /usr/local/bin -binaries. - -@item /usr/local/share/emacs/@value{VER} -Lisp code and support files. - -@item /usr/local/info -Info documentation. -@end table - -To install files in those default directories, become the superuser and -type - -@example -make install -@end example - -Note that @samp{make install} will overwrite @file{/usr/local/bin/emacs} -and any Emacs Info files that might be in @file{/usr/local/info}. - -Much more verbose instructions (with many more hints and suggestions) -come with the Emacs sources, in the file @file{INSTALL}. - -@node Updating Emacs, Problems building Emacs, Installing Emacs, Compiling and installing Emacs -@section How do I update Emacs to the latest version? -@cindex Updating Emacs - -@xref{Installing Emacs}, and follow the instructions there for -installation. - -Most files are placed in version-specific directories. Emacs -@value{VER}, for instance, places files in -@file{/usr/local/share/emacs/@value{VER}}. - -Upgrading should overwrite only, @file{/usr/local/bin/emacs} (the Emacs -binary) and documentation in @file{/usr/local/info}. Back up these -files before you upgrade, and you shouldn't have too much trouble. - -@node Problems building Emacs, Linking with -lX11 fails, Updating Emacs, Compiling and installing Emacs -@section What should I do if I have trouble building Emacs? -@cindex Problems building Emacs -@cindex Errors when building Emacs - -First look in the file @file{etc/PROBLEMS} (where you unpack the Emacs -source) to see if there is already a solution for your problem. Next, -look for other questions in this FAQ that have to do with Emacs -installation and compilation problems. - -If you'd like to have someone look at your problem and help solve it, -see @ref{Help installing Emacs}. - -If you cannot find a solution in the documentation, send a message to -@email{bug-gnu-emacs@@gnu.org}. - -Please don't post it to @uref{news:gnu.emacs.help} or send e-mail to -@email{help-gnu-emacs@@gnu.org}. For further guidelines, see -@ref{Guidelines for newsgroup postings} and @ref{Reporting bugs}. - -@node Linking with -lX11 fails, , Problems building Emacs, Compiling and installing Emacs -@section Why does linking Emacs with -lX11 fail? -@cindex Linking with -lX11 fails -@cindex lX11, linking fails with - -Emacs needs to be linked with the static version of the X11 library, -@file{libX11.a}. This may be missing. - -On OpenWindows, you may need to use @code{add_services} to add the -``OpenWindows Programmers'' optional software category from the CD-ROM. - -On HP-UX 8.0, you may need to run @code{update} again to load the -X11-PRG ``fileset.'' This may be missing even if you specified ``all -filesets'' the first time. If @file{libcurses.a} is missing, you may -need to load the ``Berkeley Development Option.'' - -@email{zoo@@armadillo.com, David Zuhn} says that MIT X builds shared -libraries by default, and only shared libraries, on those platforms that -support them. These shared libraries can't be used when undumping -@code{temacs} (the last stage of the Emacs build process). To get -regular libraries in addition to shared libraries, add this to -@file{site.cf}: - -@example -#define ForceNormalLib YES -@end example - -Other systems may have similar problems. You can always define -@code{CANNOT_DUMP} and link with the shared libraries instead. - -@cindex X Menus don't work -To get the Xmenu stuff to work, you need to find a copy of MIT's -@file{liboldX.a}. - -@c ------------------------------------------------------------ -@node Finding Emacs and related packages, Major packages and programs, Compiling and installing Emacs, Top -@chapter Finding Emacs and related packages -@cindex Finding Emacs and related packages - -@menu -* Finding Emacs on the Internet:: -* Finding a package with particular functionality:: -* Packages that do not come with Emacs:: -* Current GNU distributions:: -* Difference between Emacs and XEmacs:: -* Emacs for MS-DOS:: -* Emacs for Windows:: -* Emacs for OS/2:: -* Emacs for Atari ST:: -* Emacs for the Amiga :: -* Emacs for NeXTSTEP:: -* Emacs for Apple computers:: -* Emacs for VMS and DECwindows:: -* Modes for various languages:: -@end menu - -@node Finding Emacs on the Internet, Finding a package with particular functionality, Finding Emacs and related packages, Finding Emacs and related packages -@section Where can I get Emacs on the net (or by snail mail)? -@cindex Finding Emacs on the Internet -@cindex Snail mail, ordering Emacs via -@cindex Postal service, ordering Emacs via -@cindex Distribution, retrieving Emacs -@cindex Internet, retrieving from - -Look in the files @file{etc/DISTRIB} and @file{etc/FTP} for -information on nearby archive sites. If you don't already have Emacs, -see @ref{Informational files for Emacs}, for how to get these files. - -@xref{Installing Emacs}, for information on how to obtain and build the latest -version of Emacs, and see @ref{Current GNU distributions}, for a list of -archive sites that make GNU software available. - -@node Finding a package with particular functionality, Packages that do not come with Emacs, Finding Emacs on the Internet, Finding Emacs and related packages -@section How do I find a Emacs Lisp package that does XXX? -@cindex Package, finding -@cindex Finding an Emacs Lisp package -@cindex Functionality, finding a particular package - -First of all, you should check to make sure that the package isn't -already available. For example, typing @kbd{M-x apropos @key{RET} -wordstar @key{RET}} lists all functions and variables containing the -string @samp{wordstar}. - -It is also possible that the package is on your system, but has not been -loaded. To see which packages are available for loading, look through -your computer's lisp directory (@pxref{File-name conventions}). The Lisp -source to most packages contains a short description of how they -should be loaded, invoked, and configured---so before you use or -modify a Lisp package, see if the author has provided any hints in the -source code. - -The command @kbd{C-h p} (@code{finder-by-keyword}) allows you to browse -the constituent Emacs packages. - -For advice on how to find extra packages that are not part of Emacs, -see @ref{Packages that do not come with Emacs}. - -@node Packages that do not come with Emacs, Current GNU distributions, Finding a package with particular functionality, Finding Emacs and related packages -@section Where can I get Emacs Lisp packages that don't come with Emacs? -@cindex Unbundled packages -@cindex Finding other packages -@cindex Lisp packages that do not come with Emacs -@cindex Packages, those that do not come with Emacs -@cindex Emacs Lisp List -@cindex Emacs Lisp Archive - -@uref{http://www.anc.ed.ac.uk/~stephen/emacs/ell.html, The Emacs Lisp -List (ELL)}, maintained by @email{stephen@@anc.ed.ac.uk, Stephen Eglen}, -aims to provide one compact list with links to all of the current Emacs -Lisp files on the Internet. The ELL can be browsed over the web, or -from Emacs with @uref{http://www.anc.ed.ac.uk/~stephen/emacs/ell.el, -the @file{ell} package}. - -Many authors post their packages to the @uref{news:gnu.emacs.sources, -Emacs sources newsgroup}. You can search the archives of this -group with @uref{http://groups.google.com/group/gnu.emacs.sources, Google}, -or @uref{http://dir.gmane.org/gmane.emacs.sources, Gmane}, for example. - -Several packages are stored in -@uref{http://emacswiki.org/elisp/, the Lisp area of the Emacs Wiki}. - -For a long time, the Emacs Lisp Archive provided a central repository -for Emacs packages. Sadly, it has not been active for some time, -although you can still access the old files at - -@uref{http://www.club.cc.cmu.edu/pub/gnu/elisp-archive/} - -Read the file @file{etc/MORE.STUFF} for more information about -external packages. - -@node Current GNU distributions, Difference between Emacs and XEmacs, Packages that do not come with Emacs, Finding Emacs and related packages -@section Where can I get other up-to-date GNU stuff? -@cindex Current GNU distributions -@cindex Sources for current GNU distributions -@cindex Stuff, current GNU -@cindex Up-to-date GNU stuff -@cindex Finding current GNU software -@cindex Official GNU software sites - -The most up-to-date official GNU software is normally kept at - -@uref{ftp://ftp.gnu.org/pub/gnu} - -Read the files @file{etc/DISTRIB} and @file{etc/FTP} for more -information. - -A list of sites mirroring @samp{ftp.gnu.org} can be found at - -@uref{http://www.gnu.org/order/ftp.html} - -@node Difference between Emacs and XEmacs, Emacs for MS-DOS, Current GNU distributions, Finding Emacs and related packages -@section What is the difference between Emacs and XEmacs (formerly Lucid Emacs)? -@cindex XEmacs -@cindex Difference Emacs and XEmacs -@cindex Lucid Emacs -@cindex Epoch - -XEmacs is a branch version of Emacs. It was first called Lucid Emacs, -and was initially derived from a prerelease version of Emacs 19. In -this FAQ, we use the name ``Emacs'' only for the official version. - -Emacs and XEmacs each come with Lisp packages that are lacking in the -other. The two versions have some significant differences at the Lisp -programming level. Their current features are roughly comparable, -though the support for some operating systems, character sets and -specific packages might be quite different. - -Some XEmacs code has been contributed to Emacs, and we would like to -use other parts, but the earlier XEmacs maintainers did not always -keep track of the authors of contributed code, which makes it -impossible for the FSF to get copyright papers signed for that code. -(The FSF requires these papers for all the code included in the Emacs -release, aside from generic C support packages that retain their -separate identity and are not integrated into the code of Emacs -proper.) - -If you want to talk about these two versions and distinguish them, -please call them ``Emacs'' and ``XEmacs.'' To contrast ``XEmacs'' -with ``GNU Emacs'' would be misleading, since XEmacs too has its -origin in the work of the GNU Project. Terms such as ``Emacsen'' and -``(X)Emacs'' are not wrong, but they are not very clear, so it -is better to write ``Emacs and XEmacs.'' - -@node Emacs for MS-DOS, Emacs for Windows, Difference between Emacs and XEmacs, Finding Emacs and related packages -@section Where can I get Emacs for my PC running MS-DOS? -@cindex MS-DOS, Emacs for -@cindex DOS, Emacs for -@cindex Compiling Emacs for DOS -@cindex Emacs for MS-DOS -@cindex Tools needed to compile Emacs under DOS - -A pre-built binary distribution of Emacs is available from the -SimTel.NET archives. This version apparently works under MS-DOS and -Windows (3.X, 9X, ME, NT, and 2000) and supports long file names under -Windows 9X, Windows ME, and Windows 2000. More information is available -from - -@uref{ftp://ftp.delorie.com/pub/djgpp/current/v2gnu/emacs.README} - -The binary itself is available in the files @file{em*.zip} in the -directory - -@uref{ftp://ftp.delorie.com/pub/djgpp/current/v2gnu/} - -If you prefer to compile Emacs for yourself, you can do so with the -current distribution directly. You will need a 386 (or -better) processor, and to be running MS-DOS 3.0 or later. According to -@email{eliz@@gnu.org, Eli Zaretskii} and -@email{hankedr@@dms.auburn.edu, Darrel Hankerson}, you will need the -following: - -@table @emph - -@item Compiler -DJGPP version 1.12 maint 1 or later. Djgpp 2.0 or later is -recommended, since 1.x is very old an unmaintained. Djgpp 2 supports -long file names on Windows 9X/ME/2K. - -You can get the latest release of DJGPP by retrieving all of -the files in - -@uref{ftp://ftp.delorie.com/pub/djgpp/current/v2*} - -@item Unpacking program -The easiest way is to use @code{djtar} which comes with DJGPP v2.x, -because it can open gzip'ed tarfiles (i.e., those ending with -@file{.tar.gz}) in one step. @code{Djtar} comes in -@file{djdev@var{nnn}.zip} archive (where @var{nnn} is the DJGPP version -number), from the URL mentioned above. - -@strong{Warning!} Do @strong{not} use the popular WinZip program to -unpack the Emacs distribution! WinZip is known to corrupt some of the -files by converting them to the DOS CR-LF format, it doesn't always -preserve the directory structure recorded in the compressed Emacs -archive, and commits other atrocities. Some of these problems could -actually prevent Emacs from building successfully! - -@item make, mv, sed, and rm -All of these utilities are available at - -@uref{ftp://ftp.delorie.com/pub/djgpp/current/v2gnu} - -16-bit utilities can be found in GNUish, at - -@uref{http://www.simtel.net/pub/gnuish/} - -@noindent -(@code{mv} and @code{rm} are in the Fileutils package, @code{sed} and -@code{make} are each one in a separate package named after them.) - -@end table - -The files @file{INSTALL} (near its end) and @file{etc/PROBLEMS} in the -directory of the Emacs sources contains some additional information -regarding Emacs under MS-DOS. - -For a list of other MS-DOS implementations of Emacs (and Emacs -look-alikes), consult the list of ``Emacs implementations and literature,'' -available at - -@uref{ftp://rtfm.mit.edu/pub/usenet/comp.emacs/} - -Note that while many of these programs look similar to Emacs, they often -lack certain features, such as the Emacs Lisp extension language. - -@node Emacs for Windows, Emacs for OS/2, Emacs for MS-DOS, Finding Emacs and related packages -@section Where can I get Emacs for Microsoft Windows? -@cindex FAQ for NT Emacs -@cindex Emacs for MS-Windows -@cindex Microsoft Windows, Emacs for -@cindex Windows 9X, ME, NT, 2K, and CE, Emacs for - -For information on Emacs for Windows 95 and NT, read the FAQ produced by -@email{voelker@@cs.washington.edu, Geoff Voelker} and currently maintained -by @email{ramprasad@@gnu.org, Ramprasad B}, available at - -@uref{http://www.gnu.org/software/emacs/windows/ntemacs.html} - -@xref{Emacs for MS-DOS}, for Windows 3.1. - -A port of Emacs 20.7 for Windows CE, based on NTEmacs, is available at - -@uref{http://www.rainer-keuchel.de/software.html} - -@noindent -This port was done by @email{coyxc@@rainer-keuchel.de, Rainer Keuchel}, -and supports all Emacs features except async subprocesses and menus. -You will need MSVC 6.0 and a Windows CE SDK to build this port. - -@node Emacs for OS/2, Emacs for Atari ST, Emacs for Windows, Finding Emacs and related packages -@section Where can I get Emacs for my PC running OS/2? -@cindex OS/2, Emacs for - -Emacs 20.6 is ported for emx on OS/2 2.0 or 2.1, and is available at - -@uref{ftp://hobbes.nmsu.edu/pub/os2/apps/editors/emacs/} - -@noindent -and also at - -@uref{http://www.dotemacs.de/os2/emacs.html} - -Instructions for installation, basic setup, and other useful information -for OS/2 users of Emacs can be found at - -@uref{http://home.snafu.de/ohei/emacs/emacs206-os2.html} - -@node Emacs for Atari ST, Emacs for the Amiga , Emacs for OS/2, Finding Emacs and related packages -@section Where can I get Emacs for my Atari ST? -@cindex Atari ST, Emacs for -@cindex TOS, Emacs for - -Roland Sch@"auble reports that Emacs 18.58 running on plain TOS and MiNT -is available at -@uref{ftp://atari.archive.umich.edu/Editors/Emacs-18-58/1858b-d3.zoo}. - -@node Emacs for the Amiga , Emacs for NeXTSTEP, Emacs for Atari ST, Finding Emacs and related packages -@section Where can I get Emacs for my Amiga? -@cindex Amiga, Emacs for - -The files you need are available at - -@uref{ftp://ftp.wustl.edu/pub/aminet/util/gnu/} - -@email{dgilbert@@gamiga.guelphnet.dweomer.org, David Gilbert} has released a -beta version of Emacs 19.25 for the Amiga. You can get the binary at - -@uref{ftp://ftp.wustl.edu/pub/aminet/util/gnu/a2.0bEmacs-bin.lha} - -@node Emacs for NeXTSTEP, Emacs for Apple computers, Emacs for the Amiga , Finding Emacs and related packages -@section Where can I get Emacs for NeXTSTEP? -@cindex NeXTSTEP, Emacs for - -Emacs.app is a NeXTSTEP version of Emacs 19.34 which supports colors, -menus, and multiple frames. You can get it from - -@uref{ftp://next-ftp.peak.org/pub/next-ftp/next/apps/emacs/Emacs_for_NeXTstep.4.20a1.NIHS.b.tar.gz} - -@node Emacs for Apple computers, Emacs for VMS and DECwindows, Emacs for NeXTSTEP, Finding Emacs and related packages -@section Where can I get Emacs for my Apple computer? -@cindex Apple computers, Emacs for -@cindex Macintosh, Emacs for - -Beginning with version 21.1, the Macintosh is supported in the official -Emacs distribution; see the files @file{mac/README} and -@file{mac/INSTALL} in the Emacs distribution for build instructions. - -Beginning with version 22.1, Emacs supports Mac OS X natively. - -@node Emacs for VMS and DECwindows, Modes for various languages, Emacs for Apple computers, Finding Emacs and related packages -@section Where do I get Emacs that runs on VMS under DECwindows? -@cindex DECwindows, Emacs for -@cindex VMS, Emacs for - -Up-to-date information about GNU software (including Emacs) for VMS is -available at @uref{http://www.lp.se/gnu-vms/}. - -@node Modes for various languages, , Emacs for VMS and DECwindows, Finding Emacs and related packages -@section Where can I get modes for Lex, Yacc/Bison, Bourne shell, csh, C@t{++}, Objective-C, Pascal, Java, and Awk? -@cindex Awk, mode for -@cindex @code{awk-mode} -@cindex Bison, mode for -@cindex Bourne Shell, mode for -@cindex C@t{++}, mode for -@cindex Java, mode for -@cindex Lex mode -@cindex Objective-C, mode for -@cindex @code{pascal-mode} -@cindex Shell mode -@cindex Yacc mode -@cindex @file{csh} mode -@cindex @code{sh-mode} -@cindex @code{cc-mode} - -Most of these modes are now available in standard Emacs distribution. -To get additional modes, see @ref{Finding a package with particular -functionality}. - -Barry Warsaw's @code{cc-mode} now works for C, C@t{++}, Objective-C, and -Java code. It is distributed with Emacs, but has -@uref{http://cc-mode.sourceforge.net/, its own homepage}. - -@c ------------------------------------------------------------ -@node Major packages and programs, Key bindings, Finding Emacs and related packages, Top -@chapter Major packages and programs -@cindex Major packages and programs - -@menu -* VM:: -* Supercite:: -* Calc:: -* VIPER:: -* AUCTeX:: -* BBDB:: -* Ispell:: -* Emacs/W3:: -* EDB:: -* Mailcrypt:: -* JDE:: -* Patch:: -@end menu - -@node VM, Supercite, Major packages and programs, Major packages and programs -@section VM (View Mail) --- another mail reader within Emacs, with MIME support -@cindex VM -@cindex Alternative mail software -@cindex View Mail -@cindex E-mail reader, VM - -@table @b - -@item Author -@email{kyle_jones@@wonderworks.com, Kyle Jones} - -@item Latest version -7.19 - -@item Distribution -@uref{ftp://ftp.wonderworks.com/pub/vm/vm.tar.gz} - -@item Informational newsgroup -@uref{news:gnu.emacs.vm.info}@* - -@item Bug reports newsgroup -@uref{news:gnu.emacs.vm.bug}@* -Or send reports to @email{bug-vm@@wonderworks.com} -@end table - -VM 7 works well with Emacs 21 and Emacs 22. Older versions of VM -suitable for use with older versions of Emacs are available from -@uref{ftp://ftp.wonderworks.com/pub/vm/, the same FTP site}. - - -@node Supercite, Calc, VM, Major packages and programs -@section Supercite --- mail and news citation package within Emacs -@cindex Supercite -@cindex Superyank -@cindex Mail and news citations -@cindex News and mail citations -@cindex Citations in mail and news - -@table @b - -@item Author -@email{barry@@python.org, Barry Warsaw} - -@item Latest version -3.54 (comes bundled with Emacs since version 20) - -@item Distribution -@uref{http://www.python.org/emacs/supercite.tar.gz} - -@item Mailing list -Subscription requests to @email{supercite-request@@python.org}@* -Submissions @email{supercite@@python.org} - -@end table - -Superyank is an old version of Supercite. - -@node Calc, VIPER, Supercite, Major packages and programs -@section Calc --- poor man's Mathematica within Emacs -@cindex Programmable calculator -@cindex Calc -@cindex Mathematical package - -@table @b - -@item Author -@email{daveg@@csvax.cs.caltech.edu, Dave Gillespie} - -@item Latest version -2.1 (part of Emacs since version 22.1) - -@item Distribution -No separate distribution outside of Emacs. Older versions -are available at @uref{ftp://ftp.gnu.org/pub/gnu/calc/}. - -@end table - -Note that Calc 2.02f needs patching to work with Emacs 21 and later. - -@cindex @code{calculator}, a package -Emacs 21.1 and later comes with a package called @file{calculator.el}. -It doesn't support all the mathematical wizardry offered by Calc, such -as matrices, special functions, and statistics, but is more than -adequate as a replacement for @code{xcalc} and similar programs. - -@node VIPER, AUCTeX, Calc, Major packages and programs -@section VIPER --- @code{vi} emulation for Emacs -@cindex @code{vi} emulation -@cindex VIPER -@cindex Emulation of @code{vi} - -Since Emacs 19.29, the preferred @code{vi} emulation in Emacs is VIPER -(@kbd{M-x viper-mode @key{RET}}), which comes with Emacs. It extends -and supersedes VIP (including VIP 4.3) and provides @code{vi} emulation -at several levels, from one that closely follows @code{vi} to one that -departs from @code{vi} in several significant ways. - -For Emacs 19.28 and earlier, the following version of VIP is generally -better than the one distributed with Emacs: - -@table @b -@item Author -@email{sane@@cs.uiuc.edu, Aamod Sane} - -@item Latest version -4.3 - -@item Distribution -@uref{ftp://www.club.cc.cmu.edu/pub/gnu/elisp-archive/modes/vip-mode.tar.Z} - -@end table - -@node AUCTeX, BBDB, VIPER, Major packages and programs -@section AUC@TeX{} --- enhanced @TeX{} modes with debugging facilities -@cindex Mode for @TeX{} -@cindex @TeX{} mode -@cindex AUC@TeX{} mode for editing @TeX{} -@cindex Writing and debugging @TeX{} - -AUC@TeX{} is a set of sophisticated major modes for @TeX{}, LaTeX, -ConTeXt, and Texinfo offering context-sensitive syntax highlighting, -indentation, formatting and folding, macro completion, @TeX{} shell -functionality, and debugging. Be also sure to check out -@ref{Introduction, RefTeX, Introduction, reftex, Ref@TeX{} User Manual}. -Current versions of AUC@TeX{} include the -@uref{http://www.gnu.org/software/auctex/preview-latex,preview-latex} -package for WYSIWYG previews of various LaTeX constructs in the Emacs -source buffer. - -@table @b - -@item Authors -@email{krab@@iesd.auc.dk, Kresten Krab Thorup}, @* -@email{abraham@@dina.kvl.dk, Per Abrahamsen}, @* and others. - -@item Maintainer -@email{dak@@gnu.org, David Kastrup} - -@item Latest version -11.84 - -@item Distribution -@uref{ftp://ftp.gnu.org/pub/gnu/auctex/} - -@item Web site -@uref{http://www.gnu.org/software/auctex/} - -@item Mailing list: -Subscription requests to @email{auctex-request@@gnu.org}@* -Submissions to @email{auctex@@gnu.org} - -@end table - -@node BBDB, Ispell, AUCTeX, Major packages and programs -@section BBDB --- personal Info Rolodex integrated with mail/news readers -@cindex BBDB -@cindex Rolodex-like functionality -@cindex Integrated contact database -@cindex Contact database -@cindex Big Brother Database -@cindex Address book - -@table @b - -@item Maintainer -@email{waider@@waider.ie, Ronan Waide} - -@item Latest version -2.34 - -@item Distribution -@uref{http://bbdb.sourceforge.net/} - -@item Mailing lists -Subscription requests to @email{bbdb-info-request@@lists.sourceforge.net}@* -Submissions to @email{bbdb-info@@lists.sourceforge.net}@* -Release announcements: @email{bbdb-announce-request@@lists.sourceforge.net} - -@end table - -@node Ispell, Emacs/W3, BBDB, Major packages and programs -@section Ispell --- spell checker in C with interface for Emacs -@cindex Spell-checker -@cindex Checking spelling -@cindex Ispell - -@table @b - -@item Author -@email{geoff@@cs.hmc.edu, Geoff Kuenning} - -@item Latest version -3.3.02 - -@item Distribution -@uref{http://fmg-www.cs.ucla.edu/geoff/tars/ispell-3.3.02.tar.gz}@* - -@item Web site -@uref{http://fmg-www.cs.ucla.edu/geoff/ispell.html} - -@end table - -This Ispell program is distinct from GNU Ispell 4.0. GNU Ispell 4.0 is -no longer a supported product. - -@node Emacs/W3, EDB, Ispell, Major packages and programs -@section Emacs/W3 --- A World Wide Web browser inside of Emacs -@cindex WWW browser -@cindex Web browser -@cindex HTML browser in Emacs -@cindex @code{w3-mode} - -@table @b - -@item Author -@email{wmperry@@gnu.org, Bill Perry} - -@item Maintainer -Emacs/W3 needs a maintainer. It has lain dormant for several years. If -you would like to take over the project, please contact -@email{maintainers@@gnu.org}. - -@item Latest version -4.0pre.47 - -@item Distribution -@uref{http://savannah.gnu.org/projects/w3} - -@item Mailing lists -Receive announcements from @email{w3-announce@@gnu.org}@* -Help to develop Emacs/W3 at @email{w3-dev@@gnu.org} - -@end table - -@node EDB, Mailcrypt, Emacs/W3, Major packages and programs -@section EDB --- Database program for Emacs; replaces forms editing modes -@cindex EDB -@cindex Database -@cindex Forms mode - -@table @b -@item Author -@email{mernst@@theory.lcs.mit.edu, Michael Ernst} - -@item Latest version -1.21 - -@item Distribution -@uref{ftp://theory.lcs.mit.edu/pub/emacs/edb} - -@end table - -@node Mailcrypt, JDE, EDB, Major packages and programs -@section Mailcrypt --- PGP interface within Emacs mail and news -@cindex PGP -@cindex GPG -@cindex Interface to PGP from Emacs mail and news -@cindex News, interface to PGP from -@cindex Mail, interface to PGP from -@cindex Encryption software, interface to - -@table @b - -@item Authors -@email{patl@@lcs.mit.edu, Patrick J. LoPresti} and -@email{jin@@atype.com, Jin S. Choi} - -@item Maintainer -@email{warner-mailcrypt@@lothar.com, Brian Warner} - -@item Latest version -3.5.8 - -@item Distribution -@uref{http://dl.sourceforge.net/sourceforge/mailcrypt/mailcrypt-3.5.8.tar.gz} - -@item Web site -@uref{http://mailcrypt.sourceforge.net/} - -@end table - -Note that a new package called PGG is bundled with Emacs starting with -version 22.1. It is a modern interface to various PGP implementations, -including @uref{http://www.gnupg.org/, The GNU Privacy Guard} and -supports symmetric encryption. - -@node JDE, Patch, Mailcrypt, Major packages and programs -@section JDE --- Integrated development environment for Java -@cindex Java development environment -@cindex Integrated Java development environment -@cindex JDE - -@table @b - -@item Author -@email{paulk@@mathworks.com, Paul Kinnucan} - -@item Latest version -2.3.5 - -@item Web site -@uref{http://jdee.sunsite.dk/} - -@item Mailing lists -Subscription requests to @email{jde-subscribe@@sunsite.dk}@* -Receive announcements from @email{jde-announce-subscribe@@sunsite.dk} - -@end table - -@node Patch, , JDE, Major packages and programs -@section Patch --- program to apply ``diffs'' for updating files -@cindex Updating files with diffs -@cindex Patching source files with diffs -@cindex Diffs and patching -@cindex @file{patch} - -@table @b - -@item Author -@email{lwall@@wall.org, Larry Wall} (with GNU modifications) - -@item Latest version -2.5.4 - -@item Distribution -@xref{Current GNU distributions}. - -@end table - -@c ------------------------------------------------------------ -@node Key bindings, Alternate character sets, Major packages and programs, Top -@chapter Key bindings -@cindex Key bindings - -@menu -* Binding keys to commands:: -* Invalid prefix characters:: -* Terminal setup code works after Emacs has begun:: -* Using function keys under X:: -* Working with function and arrow keys:: -* X key translations for Emacs:: -* Handling C-s and C-q with flow control:: -* Binding C-s and C-q:: -* Backspace invokes help:: -* stty and Backspace key:: -* Swapping keys:: -* Producing C-XXX with the keyboard:: -* No Meta key:: -* No Escape key:: -* Compose Character:: -* Binding combinations of modifiers and function keys:: -* Meta key does not work in xterm:: -* ExtendChar key does not work as Meta:: -* SPC no longer completes file names:: -@end menu - -@node Binding keys to commands, Invalid prefix characters, Key bindings, Key bindings -@section How do I bind keys (including function keys) to commands? -@cindex Binding keys to commands -@cindex Keys, binding to commands -@cindex Commands, binding keys to - -Keys can be bound to commands either interactively or in your -@file{.emacs} file. To interactively bind keys for all modes, type -@kbd{M-x global-set-key @key{RET} @var{key} @var{cmd} @key{RET}}. - -To bind a key just in the current major mode, type @kbd{M-x -local-set-key @key{RET} @var{key} @var{cmd} @key{RET}}. - -@inforef{Key Bindings, Key Bindings, emacs}, for further details. - -To make the process of binding keys interactively easier, use the -following ``trick'': First bind the key interactively, then immediately -type @kbd{C-x @key{ESC} @key{ESC} C-a C-k C-g}. Now, the command needed -to bind the key is in the kill ring, and can be yanked into your -@file{.emacs} file. If the key binding is global, no changes to the -command are required. For example, - -@lisp -(global-set-key (quote [f1]) (quote help-for-help)) -@end lisp - -@noindent -can be placed directly into the @file{.emacs} file. If the key binding is -local, the command is used in conjunction with the @samp{add-hook} function. -For example, in TeX mode, a local binding might be - -@lisp -(add-hook 'tex-mode-hook - (lambda () - (local-set-key (quote [f1]) (quote help-for-help)))) -@end lisp - - -@itemize @bullet - -@item -Control characters in key sequences, in the form yanked from the kill -ring are given in their graphic form---i.e., @key{CTRL} is shown as -@samp{^}, @key{TAB} as a set of spaces (usually 8), etc. You may want -to convert these into their vector or string forms. - -@item -If a prefix key of the character sequence to be bound is already -bound as a complete key, then you must unbind it before the new -binding. For example, if @kbd{ESC @{} is previously bound: - -@lisp -(global-unset-key [?\e ?@{]) ;; or -(local-unset-key [?\e ?@{]) -@end lisp - -@item -Aside from commands and ``lambda lists,'' a vector or string also -can be bound to a key and thus treated as a macro. For example: - -@lisp -(global-set-key [f10] [?\C-x?\e?\e?\C-a?\C-k?\C-g]) ;; or -(global-set-key [f10] "\C-x\e\e\C-a\C-k\C-g") -@end lisp - -@end itemize - -@node Invalid prefix characters, Terminal setup code works after Emacs has begun, Binding keys to commands, Key bindings -@section Why does Emacs say @samp{Key sequence XXX uses invalid prefix characters}? -@cindex Prefix characters, invalid -@cindex Invalid prefix characters -@cindex Misspecified key sequences - -Usually, one of two things has happened. In one case, the control -character in the key sequence has been misspecified (e.g. @samp{C-f} -used instead of @samp{\C-f} within a Lisp expression). In the other -case, a @dfn{prefix key} in the keystroke sequence you were trying to bind -was already bound as a @dfn{complete key}. Historically, the @samp{ESC [} -prefix was usually the problem, in which case you should evaluate either -of these forms before attempting to bind the key sequence: - -@lisp -(global-unset-key [?\e ?[]) ;; or -(global-unset-key "\e[") -@end lisp - -@node Terminal setup code works after Emacs has begun, Using function keys under X, Invalid prefix characters, Key bindings -@section Why doesn't this [terminal or window-system setup] code work in my @file{.emacs} file, but it works just fine after Emacs starts up? -@cindex Terminal setup code in @file{.emacs} - -During startup, Emacs initializes itself according to a given code/file -order. If some of the code executed in your @file{.emacs} file needs to -be postponed until the initial terminal or window-system setup code has -been executed but is not, then you will experience this problem (this -code/file execution order is not enforced after startup). - -To postpone the execution of Emacs Lisp code until after terminal or -window-system setup, treat the code as a @dfn{lambda list} and set the -value of either the @code{term-setup-hook} or @code{window-setup-hook} -variable to this lambda function. For example, - -@lisp -(add-hook 'term-setup-hook - (lambda () - (when (string-match "\\`vt220" (or (getenv "TERM") "")) - ;; Make vt220's "Do" key behave like M-x: - (global-set-key [do] 'execute-extended-command)))) -@end lisp - -For information on what Emacs does every time it is started, see the -@file{lisp/startup.el} file. - -@node Using function keys under X, Working with function and arrow keys, Terminal setup code works after Emacs has begun, Key bindings -@section How do I use function keys under X? -@cindex Function keys -@cindex X Window System and function keys -@cindex Binding function keys - -With Emacs 19, functions keys under X are bound like any other key. @xref{Binding keys to commands}, for details. - -@node Working with function and arrow keys, X key translations for Emacs, Using function keys under X, Key bindings -@section How do I tell what characters or symbols my function or arrow keys emit? -@cindex Working with arrow keys -@cindex Arrow keys, symbols generated by -@cindex Working with function keys -@cindex Function keys, symbols generated by -@cindex Symbols generated by function keys - -Type @kbd{C-h c} then the function or arrow keys. The command will -return either a function key symbol or character sequence (see the -Emacs on-line documentation for an explanation). This works for other -keys as well. - -@node X key translations for Emacs, Handling C-s and C-q with flow control, Working with function and arrow keys, Key bindings -@section How do I set the X key ``translations'' for Emacs? -@cindex X key translations -@cindex Key translations under X -@cindex Translations for keys under X - -Emacs is not written using the Xt library by default, so there are no -``translations'' to be set. (We aren't sure how to set such translations -if you do build Emacs with Xt; please let us know if you've done this!) - -The only way to affect the behavior of keys within Emacs is through -@code{xmodmap} (outside Emacs) or @code{define-key} (inside Emacs). The -@code{define-key} command should be used in conjunction with the -@code{function-key-map} map. For instance, - -@lisp -(define-key function-key-map [M-@key{TAB}] [?\M-\t]) -@end lisp - -@noindent -defines the @kbd{M-@key{TAB}} key sequence. - -@node Handling C-s and C-q with flow control, Binding C-s and C-q, X key translations for Emacs, Key bindings -@section How do I handle @kbd{C-s} and @kbd{C-q} being used for flow control? -@cindex Flow control, @kbd{C-s} and @kbd{C-q} with -@cindex @kbd{C-s} and @kbd{C-q} with flow control - -@kbd{C-s} and @kbd{C-q} are used in the XON/XOFF flow control protocol. -This messes things up when you're using Emacs over a serial line, -because Emacs binds these keys to commands by default. Because Emacs -won't honor them as flow control characters, too many of these -characters are not passed on and overwhelm output buffers. Sometimes, -intermediate software using XON/XOFF flow control will prevent Emacs -from ever seeing @kbd{C-s} and @kbd{C-q}. - -Possible solutions: - -@itemize @bullet - -@item -Disable the use of @kbd{C-s} and @kbd{C-q} for flow control. - -You need to determine the cause of the flow control. - -@itemize @minus - -@item -your terminal - -Your terminal may use XON/XOFF flow control to have time to display -all the characters it receives. For example, VT series terminals do -this. It may be possible to turn this off from a setup menu. For -example, on a VT220 you may select ``No XOFF'' in the setup menu. This -is also true for some terminal emulation programs on PCs. - -When you turn off flow control at the terminal, you will also need to -turn it off at the other end, which might be at the computer you are -logged in to or at some terminal server in between. - -If you turn off flow control, characters may be lost; using a printer -connected to the terminal may fail. You may be able to get around -this problem by modifying the @samp{termcap} entry for your terminal to -include extra NUL padding characters. - -@item -a modem - -If you are using a dialup connection, the modems may be using -XON/XOFF flow control. It's not clear how to get around this. - -@item -a router or terminal server - -Some network box between the terminal and your computer may be using -XON/XOFF flow control. It may be possible to make it use some other -kind of flow control. You will probably have to ask your local -network experts for help with this. - -@item -@code{tty} and/or @code{pty} devices - -If your connection to Emacs goes through multiple @code{tty} and/or -@code{pty} devices, they may be using XON/XOFF flow control even when it -is not necessary. - -@email{eirik@@theory.tn.cornell.edu, Eirik Fuller} writes: - -@quotation -Some versions of @code{rlogin} (and possibly @code{telnet}) do not pass -flow control characters to the remote system to which they connect. On -such systems, Emacs on the remote system cannot disable flow control on -the local system. Sometimes @samp{rlogin -8} will avoid this problem. - -One way to cure this is to disable flow control on the local host (the -one running @code{rlogin}, not the one running @code{rlogind}) using the -@code{stty} command, before starting the @code{rlogin} process. On many -systems, @samp{stty start u stop u} will do this. - -Some versions of @samp{tcsh} will prevent even this from working. One -way around this is to start another shell before starting rlogin, -and issue the @samp{stty} command to disable flow control from that shell. -@end quotation - -Use @samp{stty -ixon} instead of @samp{stty start u stop u} on some systems. - -@end itemize - -@item -Make Emacs speak the XON/XOFF flow control protocol. - -You can make Emacs treat @kbd{C-s} and @kbd{C-q} as flow control characters by -evaluating the form - -@lisp -(enable-flow-control) -@end lisp - -@noindent -to unconditionally enable flow control or - -@lisp -(enable-flow-control-on "vt100" "h19") -@end lisp - -@noindent -(using your terminal names instead of @samp{vt100} or @samp{h19}) to -enable selectively. These commands will automatically swap @kbd{C-s} -and @kbd{C-q} to @kbd{C-\} and @kbd{C-^}. Variables can be used to -change the default swap keys (@code{flow-control-c-s-replacement} and -@code{flow-control-c-q-replacement}). - -If you are fixing this for yourself, simply put the form in your -@file{.emacs} file. If you are fixing this for your entire site, the -best place to put it is in the @file{site-lisp/site-start.el} file. -(Here @file{site-lisp} is actually a subdirectory of your Emacs -installation directory, typically @file{/usr/local/share/emacs}.) -Putting this form in @file{site-lisp/default.el} has the problem that -if the user's @file{.emacs} file has an error, this will prevent -@file{default.el} from being loaded and Emacs may be unusable for the -user, even for correcting their @file{.emacs} file (unless they're -smart enough to move it to another name). - -@code{enable-flow-control} can be invoked interactively as well: -@kbd{M-x enable-flow-control @key{RET}}. - -@end itemize - -For further discussion of this issue, read the file @file{etc/PROBLEMS} -(in the Emacs source directory when you unpack the Emacs distribution). - -@node Binding C-s and C-q, Backspace invokes help, Handling C-s and C-q with flow control, Key bindings -@section How do I bind @kbd{C-s} and @kbd{C-q} (or any key) if these keys are filtered out? -@cindex Binding @kbd{C-s} and @kbd{C-q} -@cindex @kbd{C-s} and @kbd{C-q}, binding - -To bind @kbd{C-s} and @kbd{C-q}, use either @code{enable-flow-control} -or @code{enable-flow-control-on}. @xref{Handling C-s and C-q with flow -control}, for usage and implementation details. - -To bind other keys, use @code{keyboard-translate}. @xref{Swapping -keys}, for usage details. To do this for an entire site, you should -swap the keys in @file{site-lisp/site-start.el}. @xref{Handling C-s -and C-q with flow control}, for an explanation of why -@file{site-lisp/default.el} should not be used. - -@itemize @bullet - -@item -If you do this for an entire site, the users will be confused by -the disparity between what the documentation says and how Emacs -actually behaves. - -@end itemize - -@node Backspace invokes help, stty and Backspace key, Binding C-s and C-q, Key bindings -@section Why does the @key{Backspace} key invoke help? -@cindex Backspace key invokes help -@cindex Help invoked by Backspace -@cindex DEL key does not delete - -The @key{Backspace} key (on most keyboards) generates @acronym{ASCII} code 8. -@kbd{C-h} sends the same code. In Emacs by default @kbd{C-h} invokes -help-command. This is intended to be easy to remember since the first -letter of @samp{help} is @samp{h}. The easiest solution to this problem -is to use @kbd{C-h} (and @key{Backspace}) for help and @key{DEL} (the -@key{Delete} key) for deleting the previous character. - -For many people this solution may be problematic: - -@itemize @bullet - -@item -They normally use @key{Backspace} outside of Emacs for deleting the -previous character. This can be solved by making @key{DEL} the command -for deleting the previous character outside of Emacs. On many Unix -systems, this command will remap @key{DEL}: - -@example -stty erase `^?' -@end example - -@item -The user may prefer the @key{Backspace} key for deleting the -previous character because it is more conveniently located on their -keyboard or because they don't even have a separate @key{Delete} key. -In this case, the @key{Backspace} key should be made to behave like -@key{Delete}. There are several methods. - -@itemize @minus -@item -Some terminals (e.g., VT3## terminals) and terminal emulators (e.g., -TeraTerm) allow the character generated by the @key{Backspace} key to be -changed from a setup menu. - -@item -You may be able to get a keyboard that is completely programmable, or a -terminal emulator that supports remapping of any key to any other key. - -@item -With Emacs 21.1 and later, you can control the effect of the -@key{Backspace} and @key{Delete} keys, on both dumb terminals and a -windowed displays, by customizing the option -@code{normal-erase-is-backspace-mode}, or by invoking @kbd{M-x -normal-erase-is-backspace}. See the documentation of these symbols -(@pxref{Emacs Lisp documentation}) for more info. - -@item -It is possible to swap the @key{Backspace} and @key{DEL} keys inside -Emacs: - -@lisp -(keyboard-translate ?\C-h ?\C-?) -@end lisp - -@noindent -This is the recommended method of forcing @key{Backspace} to act as -@key{DEL}, because it works even in modes which bind @key{DEL} to -something other than @code{delete-backward-char}. - -Similarly, you could remap @key{DEL} to act as @kbd{C-d}, which by -default deletes forward: - -@lisp -(keyboard-translate ?\C-? ?\C-d) -@end lisp - -@xref{Swapping keys}, for further details about @code{keyboard-translate}. - -@item -Another approach is to switch key bindings and put help on @kbd{C-x h} -instead: - -@lisp -(global-set-key "\C-h" 'delete-backward-char) - -;; overrides mark-whole-buffer -(global-set-key "\C-xh" 'help-command) -@end lisp - -@noindent -This method is not recommended, though: it only solves the problem for -those modes which bind @key{DEL} to @code{delete-backward-char}. Modes -which bind @key{DEL} to something else, such as @code{view-mode}, will -not work as you expect when you press the @key{Backspace} key. For this -reason, we recommend the @code{keyboard-translate} method, shown -above. - -Other popular key bindings for help are @kbd{M-?} and @kbd{C-x ?}. -@end itemize - -Don't try to bind @key{DEL} to @code{help-command}, because there are -many modes that have local bindings of @key{DEL} that will interfere. - -@end itemize - -When Emacs 21 or later runs on a windowed display, it binds the -@key{Delete} key to a command which deletes the character at point, to -make Emacs more consistent with keyboard operation on these systems. - -For more information about troubleshooting this problem, see @ref{DEL -Does Not Delete, , If @key{DEL} Fails to Delete, emacs, The GNU Emacs -Manual}. - -@node stty and Backspace key, Swapping keys, Backspace invokes help, Key bindings -@section Why doesn't Emacs look at the @file{stty} settings for @key{Backspace} vs. @key{Delete}? -@cindex @file{stty} and Emacs -@cindex Backspace and @file{stty} -@cindex Delete and @file{stty} - -Good question! - -@c FIXME: RMS explained the reasons for this on emacs-hackers. It's -@c probably worth putting that explanation here. - -@node Swapping keys, Producing C-XXX with the keyboard, stty and Backspace key, Key bindings -@section How do I swap two keys? -@cindex Swapping keys -@cindex Keys, swapping -@cindex @code{keyboard-translate} - -You can swap two keys (or key sequences) by using the -@code{keyboard-translate} function. For example, to turn @kbd{C-h} -into @key{DEL} and @key{DEL} to @kbd{C-h}, use - -@lisp -(keyboard-translate ?\C-h ?\C-?) ; translate `C-h' to DEL -(keyboard-translate ?\C-? ?\C-h) ; translate DEL to `C-h'. -@end lisp - -@noindent -The first key sequence of the pair after the function identifies what is -produced by the keyboard; the second, what is matched for in the -keymaps. - -However, in the specific case of @kbd{C-h} and @key{DEL}, you should -toggle @code{normal-erase-is-backspace-mode} instead of calling -@code{keyboard-translate}. @inforef{DEL Does Not Delete, DEL Does Not Delete, -emacs}. - -Keyboard translations are not the same as key bindings in keymaps. -Emacs contains numerous keymaps that apply in different situations, but -there is only one set of keyboard translations, and it applies to every -character that Emacs reads from the terminal. Keyboard translations -take place at the lowest level of input processing; the keys that are -looked up in keymaps contain the characters that result from keyboard -translation. - -@node Producing C-XXX with the keyboard, No Meta key, Swapping keys, Key bindings -@section How do I produce C-XXX with my keyboard? -@cindex Producing control characters -@cindex Generating control characters -@cindex Control characters, generating - -On terminals (but not under X), some common ``aliases'' are: - -@table @asis - -@item @kbd{C-2} or @kbd{C-@key{SPC}} -@kbd{C-@@} - -@item @kbd{C-6} -@kbd{C-^} - -@item @kbd{C-7} or @kbd{C-S--} -@kbd{C-_} - -@item @kbd{C-4} -@kbd{C-\} - -@item @kbd{C-5} -@kbd{C-]} - -@item @kbd{C-/} -@kbd{C-?} - -@end table - -Often other aliases exist; use the @kbd{C-h c} command and try -@key{CTRL} with all of the digits on your keyboard to see what gets -generated. You can also try the @kbd{C-h w} command if you know the -name of the command. - -@node No Meta key, No Escape key, Producing C-XXX with the keyboard, Key bindings -@section What if I don't have a @key{Meta} key? -@cindex No @key{Meta} key -@cindex @key{Meta} key, what to do if you lack it - -On many keyboards, the @key{Alt} key acts as @key{Meta}, so try it. - -Instead of typing @kbd{M-a}, you can type @kbd{@key{ESC} a}. In fact, -Emacs converts @kbd{M-a} internally into @kbd{@key{ESC} a} anyway -(depending on the value of @code{meta-prefix-char}). Note that you -press @key{Meta} and @key{a} together, but with @key{ESC}, you press -@key{ESC}, release it, and then press @key{a}. - -@node No Escape key, Compose Character, No Meta key, Key bindings -@section What if I don't have an @key{Escape} key? -@cindex No Escape key -@cindex Lacking an Escape key -@cindex Escape key, lacking - -Type @kbd{C-[} instead. This should send @acronym{ASCII} code 27 just like an -Escape key would. @kbd{C-3} may also work on some terminal (but not -under X). For many terminals (notably DEC terminals) @key{F11} -generates @key{ESC}. If not, the following form can be used to bind it: - -@lisp -;; F11 is the documented ESC replacement on DEC terminals. -(define-key function-key-map [f11] [?\e]) -@end lisp - -@node Compose Character, Binding combinations of modifiers and function keys, No Escape key, Key bindings -@section Can I make my @key{Compose Character} key behave like a @key{Meta} key? -@cindex @key{Compose Character} key, using as @key{Meta} -@cindex @key{Meta}, using @key{Compose Character} for - -On a dumb terminal such as a VT220, no. It is rumored that certain -VT220 clones could have their @key{Compose} key configured this way. If -you're using X, you might be able to do this with the @code{xmodmap} -command. - -@node Binding combinations of modifiers and function keys, Meta key does not work in xterm, Compose Character, Key bindings -@section How do I bind a combination of modifier key and function key? -@cindex Modifiers and function keys -@cindex Function keys and modifiers -@cindex Binding modifiers and function keys - -With Emacs 19 and later, you can represent modified function keys in -vector format by adding prefixes to the function key symbol. For -example (from the on-line documentation): - -@lisp -(global-set-key [?\C-x right] 'forward-page) -@end lisp - -@noindent -where @samp{?\C-x} is the Lisp character constant for the character @kbd{C-x}. - -You can use the modifier keys @key{Control}, @key{Meta}, @key{Hyper}, -@key{Super}, @key{Alt}, and @key{Shift} with function keys. To -represent these modifiers, prepend the strings @samp{C-}, @samp{M-}, -@samp{H-}, @samp{s-}, @samp{A-}, and @samp{S-} to the symbol name. Here -is how to make @kbd{H-M-RIGHT} move forward a word: - -@lisp -(global-set-key [H-M-right] 'forward-word) -@end lisp - -@itemize @bullet - -@item -Not all modifiers are permitted in all situations. @key{Hyper}, -@key{Super}, and @key{Alt} are not available on Unix character -terminals. Non-@acronym{ASCII} keys and mouse events (e.g. @kbd{C-=} and -@kbd{Mouse-1}) also fall under this category. - -@end itemize - -@xref{Binding keys to commands}, for general key binding instructions. - -@node Meta key does not work in xterm, ExtendChar key does not work as Meta, Binding combinations of modifiers and function keys, Key bindings -@section Why doesn't my @key{Meta} key work in an @code{xterm} window? -@cindex @key{Meta} key and @code{xterm} -@cindex Xterm and @key{Meta} key - -@inforef{Unibyte Mode, Single-Byte Character Set Support, emacs}. - -If the advice in the Emacs manual fails, try all of these methods before -asking for further help: - -@itemize @bullet - -@item -You may have big problems using @code{mwm} as your window manager. -(Does anyone know a good generic solution to allow the use of the -@key{Meta} key in Emacs with @file{mwm}?) - -@item -For X11: Make sure it really is a @key{Meta} key. Use @code{xev} to -find out what keysym your @key{Meta} key generates. It should be either -@code{Meta_L} or @code{Meta_R}. If it isn't, use @file{xmodmap} to fix -the situation. If @key{Meta} does generate @code{Meta_L} or -@code{Meta_R}, but @kbd{M-x} produces a non-@acronym{ASCII} character, put this in -your @file{~/.Xdefaults} file: - -@example - XTerm*eightBitInput: false - XTerm*eightBitOutput: true -@end example - -@item -Make sure the @code{pty} the @code{xterm} is using is passing 8 bit -characters. @samp{stty -a} (or @samp{stty everything}) should show -@samp{cs8} somewhere. If it shows @samp{cs7} instead, use @samp{stty -cs8 -istrip} (or @samp{stty pass8}) to fix it. - -@item -If there is an @code{rlogin} connection between @code{xterm} and Emacs, the -@samp{-8} argument may need to be given to rlogin to make it pass all 8 bits -of every character. - -@item -If Emacs is running on Ultrix, it is reported that evaluating -@code{(set-input-mode t nil)} helps. - -@item -If all else fails, you can make @code{xterm} generate @kbd{@key{ESC} W} when -you type @kbd{M-W}, which is the same conversion Emacs would make if it -got the @kbd{M-W} anyway. In X11R4, the following resource -specification will do this: - -@example -XTerm.VT100.EightBitInput: false -@end example - -@noindent -(This changes the behavior of the @code{insert-eight-bit} action.) - -With older @code{xterm}s, you can specify this behavior with a translation: - -@example -XTerm.VT100.Translations: #override \ - Meta: string(0x1b) insert() -@end example - -@noindent -You might have to replace @samp{Meta} with @samp{Alt}. - -@end itemize - -@node ExtendChar key does not work as Meta, SPC no longer completes file names, Meta key does not work in xterm, Key bindings -@section Why doesn't my @key{ExtendChar} key work as a @key{Meta} key under HP-UX 8.0 and 9.x? -@cindex @key{ExtendChar} key as @key{Meta} -@cindex @key{Meta}, using @key{ExtendChar} for -@cindex HP-UX, the @key{ExtendChar} key - -This is a result of an internationalization extension in X11R4 and the -fact that HP is now using this extension. Emacs assumes that the -@code{XLookupString} function returns the same result regardless of the -@key{Meta} key state which is no longer necessarily true. Until Emacs -is fixed, the temporary kludge is to run this command after each time -the X server is started but preferably before any xterm clients are: - -@example -xmodmap -e 'remove mod1 = Mode_switch' -@end example - -@c FIXME: Emacs 21 supports I18N in X11; does that mean that this bug is -@c solved? - -This will disable the use of the extra keysyms systemwide, which may be -undesirable if you actually intend to use them. - -@node SPC no longer completes file names, , ExtendChar key does not work as Meta, Key bindings -@section Why doesn't SPC complete file names anymore? -@cindex @kbd{SPC} file name completion - -Starting with Emacs 22.1, @kbd{SPC} no longer completes file names in -the minibuffer, so that file names with embedded spaces could be typed -without the need to quote the spaces. - -You can get the old behavior by binding @kbd{SPC} to -@code{minibuffer-complete-word} in the minibuffer, as follows: - -@lisp -(define-key minibuffer-local-filename-completion-map (kbd "SPC") - 'minibuffer-complete-word) - -(define-key minibuffer-local-must-match-filename-map (kbd "SPC") - 'minibuffer-complete-word) -@end lisp - -@c ------------------------------------------------------------ -@node Alternate character sets, Mail and news, Key bindings, Top -@chapter Alternate character sets -@cindex Alternate character sets - -@menu -* Emacs does not display 8-bit characters:: -* Inputting eight-bit characters:: -* Kanji and Chinese characters:: -* Right-to-left alphabets:: -* How to add fonts:: -@end menu - -@node Emacs does not display 8-bit characters, Inputting eight-bit characters, Alternate character sets, Alternate character sets -@section How do I make Emacs display 8-bit characters? -@cindex Displaying eight-bit characters -@cindex Eight-bit characters, displaying - -@inforef{Unibyte Mode, Single-byte Character Set -Support, emacs}. On a Unix, when Emacs runs on a text-only terminal -display or is invoked with @samp{emacs -nw}, you typically need to use -@code{set-terminal-coding-system} to tell Emacs what the terminal can -display, even after setting the language environment; otherwise -non-@acronym{ASCII} characters will display as @samp{?}. On other operating -systems, such as MS-DOS and MS-Windows, Emacs queries the OS about the -character set supported by the display, and sets up the required -terminal coding system automatically. - -@node Inputting eight-bit characters, Kanji and Chinese characters, Emacs does not display 8-bit characters, Alternate character sets -@section How do I input eight-bit characters? -@cindex Entering eight-bit characters -@cindex Eight-bit characters, entering -@cindex Input, 8-bit characters - -Various methods are available for input of eight-bit characters. See -@inforef{Unibyte Mode, Single-byte Character Set -Support, emacs}. For more sophisticated methods, @inforef{Input -Methods, Input Methods, emacs}. - -@node Kanji and Chinese characters, Right-to-left alphabets, Inputting eight-bit characters, Alternate character sets -@section Where can I get an Emacs that handles kanji, Chinese, or other Far-Eastern character sets? -@cindex Kanji, handling with Emacs -@cindex Chinese, handling with Emacs -@cindex Japanese, handling with Emacs -@cindex Korean, handling with Emacs - -Emacs 20 and later includes many of the features of MULE, the MULtilingual -Enhancement to Emacs. @xref{Installing Emacs}, for information on where -to find and download the latest version of Emacs. - -@node Right-to-left alphabets, How to add fonts, Kanji and Chinese characters, Alternate character sets -@section Where is an Emacs that can handle Semitic (right-to-left) alphabets? -@cindex Right-to-left alphabets -@cindex Hebrew, handling with Emacs -@cindex Semitic alphabets -@cindex Arabic alphabets - -Emacs 20 and later supports Hebrew characters (ISO 8859-8), but does not -yet support right-to-left character entry and display. - -@email{joel@@exc.com, Joel M. Hoffman} has written a Lisp package called -@file{hebrew.el} that allows right-to-left editing of Hebrew. It -reportedly works out of the box with Emacs 19, but requires patches for -Emacs 18. Write to Joel if you want the patches or package. - -@c FIXME: Should we mention Ehud Karni's package? - -@file{hebrew.el} requires a Hebrew screen font, but no other hardware support. -Joel has a screen font for PCs running MS-DOS or GNU/Linux. - -You might also try querying @code{archie} for files named with -@file{hebrew}; several ftp sites in Israel may also have the necessary -files. - -@node How to add fonts, , Right-to-left alphabets, Alternate character sets -@section How do I add fonts for use with Emacs? -@cindex add fonts for use with Emacs -@cindex intlfonts - -First, download and install the BDF font files and any auxiliary -packages they need. The GNU Intlfonts distribution can be found on -@uref{http://directory.fsf.org/localization/intlfonts.html, the GNU -Software Directory Web site}. - -Next, if you are on X Window system, issue the following two commands -from the shell's prompt: - -@example - xset +fp /usr/local/share/emacs/fonts - xset fp rehash -@end example - -@noindent -(Modify the first command if you installed the fonts in a directory -that is not @file{/usr/local/share/emacs/fonts}.) You also need to -arrange for these two commands to run whenever you log in, e.g., by -adding them to your window-system startup file, such as -@file{~/.xsessionrc} or @file{~/.gnomerc}. - -Now, add the following line to your @file{~/.emacs} init file: - -@lisp - (add-to-list 'bdf-directory-list "/usr/share/emacs/fonts/bdf") -@end lisp - -@noindent -(Again, modify the file name if you installed the fonts elsewhere.) - -Finally, if you wish to use the installed fonts with @code{ps-print}, -add the following line to your @file{~/.emacs}: - -@lisp - (setq ps-multibyte-buffer 'bdf-font-except-latin) -@end lisp - -A few additional steps are necessary for MS-Windows; they are listed -below. - -First, make sure @emph{all} the directories with BDF font files are -mentioned in @code{bdf-directory-list}. On Unix and GNU/Linux -systems, one normally runs @kbd{make install} to install the BDF fonts -in the same directory. By contrast, Windows users typically don't run -the Intlfonts installation command, but unpack the distribution in -some directory, which leaves the BDF fonts in its subdirectories. For -example, assume that you unpacked Intlfonts in @file{C:/Intlfonts}; -then you should set @code{bdf-directory-list} as follows: - -@lisp - (setq bdf-directory-list - '("C:/Intlfonts/Asian" - "C:/Intlfonts/Chinese" "C:/Intlfonts/Chinese.X" - "C:/Intlfonts/Chinese.BIG" "C:/Intlfonts/Ethiopic" - "C:/Intlfonts/European" "C:/Intlfonts/European.BIG" - "C:/Intlfonts/Japanese" "C:/Intlfonts/Japanese.X" - "C:/Intlfonts/Japanese.BIG" "C:/Intlfonts/Korean.X" - "C:/Intlfonts/Misc")) -@end lisp - -@cindex @code{w32-bdf-filename-alist} -@cindex @code{w32-find-bdf-fonts} -Next, you need to set up the variable @code{w32-bdf-filename-alist} to -an alist of the BDF fonts and their corresponding file names. -Assuming you have set @code{bdf-directory-list} to name all the -directories with the BDF font files, the following Lisp snippet will -set up @code{w32-bdf-filename-alist}: - -@lisp - (setq w32-bdf-filename-alist - (w32-find-bdf-fonts bdf-directory-list)) -@end lisp - -Now, create fontsets for the BDF fonts: - -@lisp - (create-fontset-from-fontset-spec - "-*-fixed-medium-r-normal-*-16-*-*-*-c-*-fontset-bdf, - japanese-jisx0208:-*-*-medium-r-normal-*-16-*-*-*-c-*-jisx0208.1983-*, - katakana-jisx0201:-*-*-medium-r-normal-*-16-*-*-*-c-*-jisx0201*-*, - latin-jisx0201:-*-*-medium-r-normal-*-16-*-*-*-c-*-jisx0201*-*, - japanese-jisx0208-1978:-*-*-medium-r-normal-*-16-*-*-*-c-*-jisx0208.1978-*, - thai-tis620:-misc-fixed-medium-r-normal--16-160-72-72-m-80-tis620.2529-1, - lao:-misc-fixed-medium-r-normal--16-160-72-72-m-80-MuleLao-1, - tibetan-1-column:-TibMdXA-fixed-medium-r-normal--16-160-72-72-m-80-MuleTibetan-1, - ethiopic:-Admas-Ethiomx16f-Medium-R-Normal--16-150-100-100-M-160-Ethiopic-Unicode, - tibetan:-TibMdXA-fixed-medium-r-normal--16-160-72-72-m-160-MuleTibetan-0") -@end lisp - -Many of the international bdf fonts from Intlfonts are type 0, and -therefore need to be added to font-encoding-alist: - -@lisp - (setq font-encoding-alist - (append '(("MuleTibetan-0" (tibetan . 0)) - ("GB2312" (chinese-gb2312 . 0)) - ("JISX0208" (japanese-jisx0208 . 0)) - ("JISX0212" (japanese-jisx0212 . 0)) - ("VISCII" (vietnamese-viscii-lower . 0)) - ("KSC5601" (korean-ksc5601 . 0)) - ("MuleArabic-0" (arabic-digit . 0)) - ("MuleArabic-1" (arabic-1-column . 0)) - ("MuleArabic-2" (arabic-2-column . 0))) - font-encoding-alist)) -@end lisp - -You can now use the Emacs font menu to select the @samp{bdf: 16-dot medium} -fontset, or you can select it by setting the default font in your -@file{~/.emacs}: - -@lisp - (set-default-font "fontset-bdf") -@end lisp - - -@c ------------------------------------------------------------ -@node Mail and news, Concept index, Alternate character sets, Top -@chapter Mail and news -@cindex Mail and news - -@menu -* Changing the included text prefix:: -* Saving a copy of outgoing mail:: -* Expanding aliases when sending mail:: -* Rmail thinks all messages are one big one:: -* Sorting the messages in an Rmail folder:: -* Rmail writes to /usr/spool/mail:: -* Recovering mail files when Rmail munges them:: -* Replying to the sender of a message:: -* MIME with Emacs mail packages:: -* Automatically starting a mail or news reader:: -* Reading news with Emacs:: -* Gnus does not work with NNTP:: -* Viewing articles with embedded underlining:: -* Saving a multi-part Gnus posting:: -* Starting Gnus faster:: -* Catching up in all newsgroups:: -* Killing based on nonstandard headers:: -* Removing flashing messages:: -* Catch-up is slow in Gnus:: -* Gnus hangs for a long time:: -* Learning more about Gnus:: -@end menu - -@node Changing the included text prefix, Saving a copy of outgoing mail, Mail and news, Mail and news -@section How do I change the included text prefix in mail/news followups? -@cindex Prefix in mail/news followups, changing -@cindex Included text prefix, changing -@cindex Setting the included text character -@cindex Quoting in mail messages - -If you read mail with Rmail or news with Gnus, set the variable -@code{mail-yank-prefix}. For VM, set @code{vm-included-text-prefix}. -For mh-e, set @code{mh-ins-buf-prefix}. - -For fancier control of citations, use Supercite. @xref{Supercite}. - -To prevent Emacs from including various headers of the replied-to -message, set the value of @code{mail-yank-ignored-headers} to an -appropriate regexp. - -@node Saving a copy of outgoing mail, Expanding aliases when sending mail, Changing the included text prefix, Mail and news -@section How do I save a copy of outgoing mail? -@cindex Saving a copy of outgoing mail -@cindex Copying outgoing mail to a file -@cindex Filing outgoing mail -@cindex Automatic filing of outgoing mail -@cindex Mail, saving outgoing automatically - -You can either mail yourself a copy by including a @samp{BCC} header in the -mail message, or store a copy of the message directly to a file by -including an @samp{FCC} header. - -If you use standard mail, you can automatically create a @samp{BCC} to -yourself by putting - -@lisp -(setq mail-self-blind t) -@end lisp - -@noindent -in your @file{.emacs} file. You can automatically include an @samp{FCC} -field by putting something like the following in your @file{.emacs} -file: - -@lisp -(setq mail-archive-file-name (expand-file-name "~/outgoing")) -@end lisp - -The output file will be in Unix mail format, which can be read directly -by VM, but not always by Rmail. @xref{Learning how to do something}. - -If you use @code{mh-e}, add an @samp{FCC} or @samp{BCC} field to your -components file. - -It does not work to put @samp{set record filename} in the @file{.mailrc} -file. - -@node Expanding aliases when sending mail, Rmail thinks all messages are one big one, Saving a copy of outgoing mail, Mail and news -@section Why doesn't Emacs expand my aliases when sending mail? -@cindex Expanding aliases when sending mail -@cindex Mail alias expansion -@cindex Sending mail with aliases - -@itemize @bullet - -@item -You must separate multiple addresses in the headers of the mail buffer -with commas. This is because Emacs supports RFC822 standard addresses -like this one: - -@example -To: Willy Smith -@end example - -However, you do not need to---and probably should not, unless your -system's version of @file{/usr/ucb/mail} (a.k.a.@: @code{mailx}) -supports RFC822---separate addresses with commas in your -@file{~/.mailrc} file. - -@item -Emacs normally only reads the @file{.mailrc} file once per session, -when you start to compose your first mail message. If you edit -@file{.mailrc}, you can type @kbd{M-x rebuild-mail-abbrevs @key{RET}} to -make Emacs reread @file{~/.mailrc}. - -@item -If you like, you can expand mail aliases as abbrevs, as soon as you -type them in. To enable this feature, execute the following: - -@lisp -(add-hook 'mail-mode-hook 'mail-abbrevs-setup) -@end lisp - -Note that the aliases are expanded automatically only after you type -@key{RET} or a punctuation character (e.g. @kbd{,}). You can force their -expansion by moving point to the end of the alias and typing @kbd{C-x a e} -(@kbd{M-x expand-abbrev}). -@end itemize - -@node Rmail thinks all messages are one big one, Sorting the messages in an Rmail folder, Expanding aliases when sending mail, Mail and news -@section Why does Rmail think all my saved messages are one big message? -@cindex Rmail thinks all messages are one large message - -A file created through the @samp{FCC} field in a message is in Unix mail -format, not the format that Rmail uses (BABYL format). Rmail will try -to convert a Unix mail file into BABYL format on input, but sometimes it -makes errors. For guaranteed safety, you can make the -@file{saved-messages} file be an inbox for your Rmail file by using the -function @code{set-rmail-inbox-list}. - -@node Sorting the messages in an Rmail folder, Rmail writes to /usr/spool/mail, Rmail thinks all messages are one big one, Mail and news -@section How can I sort the messages in my Rmail folder? -@cindex Rmail, sorting messages in -@cindex Folder, sorting messages in an Rmail -@cindex Sorting messages in an Rmail folder - -In Rmail, type @kbd{C-c C-s C-h} to get a list of sorting functions -and their key bindings. - -@node Rmail writes to /usr/spool/mail, Recovering mail files when Rmail munges them, Sorting the messages in an Rmail folder, Mail and news -@section Why does Rmail need to write to @file{/usr/spool/mail}? -@cindex Rmail and @file{/usr/spool/mail} -@cindex @file{/usr/spool/mail} and Rmail - -This is the behavior of the @code{movemail} program which Rmail uses. -This indicates that @code{movemail} is configured to use lock files. - -RMS writes: - -@quotation -Certain systems require lock files to interlock access to mail files. -On these systems, @code{movemail} must write lock files, or you risk losing -mail. You simply must arrange to let @code{movemail} write them. - -Other systems use the @code{flock} system call to interlock access. On -these systems, you should configure @code{movemail} to use @code{flock}. -@end quotation - -@node Recovering mail files when Rmail munges them, Replying to the sender of a message, Rmail writes to /usr/spool/mail, Mail and news -@section How do I recover my mail files after Rmail munges their format? -@cindex Recovering munged mail files -@cindex Rmail munged my files -@cindex Mail files, recovering those munged by Rmail - -If you have just done @kbd{M-x rmail-input} on a file and you don't want -to save it in Rmail's format (called BABYL), just kill the buffer (with -@kbd{C-x k}). - -@cindex Exporting messages as Unix mail files -If you typed @kbd{M-x rmail} and it read some messages out of your inbox -and you want to put them in a Unix mail file, use @kbd{C-o} on each -message. - -@cindex Converting from BABYL to Unix mail format -@cindex @code{unrmail} command -If you want to convert an existing file from BABYL format to Unix mail -format, use the command @kbd{M-x unrmail}: it will prompt you for the -input and output file names. - -@pindex b2m -Alternatively, you could use the @code{b2m} program supplied with -Emacs. @code{b2m} is a filter, and is used like this: - -@example - b2m < @var{babyl-file} > @var{mbox-file} -@end example - -@noindent -where @var{babyl-file} is the name of the BABYL file, and -@var{mbox-file} is the name of the file where the converted mail will -be written. - -@node Replying to the sender of a message, MIME with Emacs mail packages, Recovering mail files when Rmail munges them, Mail and news -@section How can I force Rmail to reply to the sender of a message, but not the other recipients? -@cindex Replying only to the sender of a message -@cindex Sender, replying only to -@cindex Rmail, replying to the sender of a message in - -@email{isaacson@@seas.upenn.edu, Ron Isaacson} says: When you hit -@key{r} to reply in Rmail, by default it CCs all of the original -recipients (everyone on the original @samp{To} and @samp{CC} -lists). With a prefix argument (i.e., typing @kbd{C-u} before @key{r}), -it replies only to the sender. However, going through the whole -@kbd{C-u} business every time you want to reply is a pain. This is the -best fix I've been able to come up with: - -@lisp -(defun rmail-reply-t () - "Reply only to the sender of the current message. (See rmail-reply.)" - (interactive) - (rmail-reply t)) - -(add-hook 'rmail-mode-hook - (lambda () - (define-key rmail-mode-map "r" 'rmail-reply-t) - (define-key rmail-mode-map "R" 'rmail-reply))) -@end lisp - -@node MIME with Emacs mail packages, Automatically starting a mail or news reader, Replying to the sender of a message, Mail and news -@section How can I get my favorite Emacs mail package to support MIME? -@cindex MIME and Emacs mail packages -@cindex Mail packages and MIME -@cindex FAQ for MIME and Emacs - -Version 6.x of VM supports MIME. @xref{VM}. Gnus supports MIME in mail -and news messages as of version 5.8.1 (Pterodactyl). Rmail has limited -support for single-part MIME messages beginning with Emacs 20.3. - -@node Automatically starting a mail or news reader, Reading news with Emacs, MIME with Emacs mail packages, Mail and news -@section How do I make Emacs automatically start my mail/news reader? -@cindex Mail reader, starting automatically -@cindex News reader, starting automatically -@cindex Starting mail/news reader automatically - -To start Emacs in Gnus: - -@example -emacs -f gnus -@end example - -@noindent -in Rmail: - -@example -emacs -f rmail -@end example - -A more convenient way to start with Gnus: - -@example -alias gnus 'emacs -f gnus' -gnus -@end example - -It is probably unwise to automatically start your mail or news reader -from your @file{.emacs} file. This would cause problems if you needed to run -two copies of Emacs at the same time. Also, this would make it difficult for -you to start Emacs quickly when you needed to. - -@node Reading news with Emacs, Gnus does not work with NNTP, Automatically starting a mail or news reader, Mail and news -@section How do I read news under Emacs? -@cindex Reading news under Emacs -@cindex Usenet reader in Emacs -@cindex Gnus newsreader - -Use @kbd{M-x gnus}. It is documented in Info (@pxref{Learning how to do -something}). - -@node Gnus does not work with NNTP, Viewing articles with embedded underlining, Reading news with Emacs, Mail and news -@section Why doesn't Gnus work via NNTP? -@cindex Gnus and NNTP -@cindex NNTP, Gnus fails to work with - -There is a bug in NNTP version 1.5.10, such that when multiple requests -are sent to the NNTP server, the server only handles the first one -before blocking waiting for more input which never comes. NNTP version -1.5.11 claims to fix this. - -You can work around the bug inside Emacs like this: - -@lisp -(setq nntp-maximum-request 1) -@end lisp - -You can find out what version of NNTP your news server is running by -telnetting to the NNTP port (usually 119) on the news server machine -(i.e., @kbd{telnet server-machine 119}). The server should give its -version number in the welcome message. Type @kbd{quit} to get out. - -@xref{Spontaneous entry into isearch-mode}, for some additional ideas. - -@node Viewing articles with embedded underlining, Saving a multi-part Gnus posting, Gnus does not work with NNTP, Mail and news -@section How do I view news articles with embedded underlining (e.g., ClariNews)? -@cindex Underlining, embedded in news articles -@cindex News articles with embedded underlining -@cindex Embedded underlining in news articles - -Underlining appears like this: - -@example -_^Hu_^Hn_^Hd_^He_^Hr_^Hl_^Hi_^Hn_^Hi_^Hn_^Hg -@end example - -@email{abraham@@dina.kvl.dk, Per Abrahamsen} suggests using the following -code, which uses the underline face to turn such text into true -underlining, inconjunction with Gnus: - -@lisp -(defun gnus-article-prepare-overstrike () - ;; Prepare article for overstrike commands. - (save-excursion - (set-buffer gnus-article-buffer) - (let ((buffer-read-only nil)) - (goto-char (point-min)) - (while (search-forward "\b" nil t) - (let ((next (following-char)) - (previous (char-after (- (point) 2)))) - (cond ((eq next previous) - (delete-region (- (point) 2) (point)) - (put-text-property (point) (1+ (point)) - 'face 'bold)) - ((eq next ?_) - (delete-region (1- (point)) (1+ (point))) - (put-text-property (1- (point)) (point) - 'face 'underline)) - ((eq previous ?_) - (delete-region (- (point) 2) (point)) - (put-text-property (point) (1+ (point)) - 'face 'underline)))))))) - -(add-hook 'gnus-article-prepare-hook 'gnus-article-prepare-overstrike) -@end lisp - -Latest versions of Gnus do such a conversion automatically. - -If you prefer to do away with underlining altogether, you can -destructively remove it with @kbd{M-x ununderline-region}; do this -automatically via - -@lisp -(add-hook 'gnus-article-prepare-hook - (lambda () (ununderline-region (point-min) (point-max)))) -@end lisp - -@node Saving a multi-part Gnus posting, Starting Gnus faster, Viewing articles with embedded underlining, Mail and news -@section How do I save all the items of a multi-part posting in Gnus? -@cindex Multi-part postings in Gnus, saving -@cindex Saving multi-part postings in Gnus -@cindex Gnus, saving multi-part postings in - -Use @code{gnus-uu}. Type @kbd{C-c C-v C-h} in the Gnus summary buffer -to see a list of available commands. - -@node Starting Gnus faster, Catching up in all newsgroups, Saving a multi-part Gnus posting, Mail and news -@section How do I make Gnus start up faster? -@cindex Faster, starting Gnus -@cindex Starting Gnus faster -@cindex Gnus, starting faster - -From the Gnus FAQ (@pxref{Learning more about Gnus}): - -@quotation -@email{pktiwari@@eos.ncsu.edu, Pranav Kumar Tiwari} writes: I posted -the same query recently and I got an answer to it. I am going to -repeat the answer. What you need is a newer version of gnus, version -5.0.4+. I am using 5.0.12 and it works fine with me with the -following settings: - -@lisp -(setq gnus-check-new-newsgroups nil - gnus-read-active-file 'some - gnus-nov-is-evil nil - gnus-select-method '(nntp gnus-nntp-server)) -@end lisp -@end quotation - -@node Catching up in all newsgroups, Killing based on nonstandard headers, Starting Gnus faster, Mail and news -@section How do I catch up all newsgroups in Gnus? -@cindex Catching up all newsgroups in Gnus -@cindex Gnus, Catching up all newsgroups in - -In the @file{*Newsgroup*} buffer, type @kbd{M-< C-x ( c y C-x ) M-0 C-x e} - -Leave off the initial @kbd{M-<} if you only want to catch up from point -to the end of the @file{*Newsgroup*} buffer. - -@node Killing based on nonstandard headers, Removing flashing messages, Catching up in all newsgroups, Mail and news -@section Why can't I kill in Gnus based on the Newsgroups/Keywords/Control headers? -@cindex Killing articles based on nonstandard headers -@cindex Newsgroups header, killing articles based on -@cindex Keywords header, killing articles based on -@cindex Control header, killing articles based on - -Gnus will complain that the @samp{Newsgroups}, @samp{Keywords}, and -@samp{Control} headers are ``Unknown header'' fields. - -For the @samp{Newsgroups} header, there is an easy workaround: kill on the -@samp{Xref} header instead, which will be present on any cross-posted article -(as long as your site carries the cross-post group). - -If you really want to kill on one of these headers, you can do it like -this: - -@lisp -(gnus-kill nil "^Newsgroups: .*\\(bad\\.group\\|worse\\.group\\)") -@end lisp - -@node Removing flashing messages, Catch-up is slow in Gnus, Killing based on nonstandard headers, Mail and news -@section How do I get rid of flashing messages in Gnus for slow connections? -@cindex Flashing Gnus messages, removing -@cindex Removing flashing Gnus messages -@cindex Slow connections causing flashing messages in Gnus -@cindex Gnus, flashing messages in - -Set @code{nntp-debug-read} to @code{nil}. - -@node Catch-up is slow in Gnus, Gnus hangs for a long time, Removing flashing messages, Mail and news -@section Why is catch up slow in Gnus? -@cindex Slow catch up in Gnus -@cindex Gnus is slow when catching up -@cindex Crosspostings make Gnus catching up slow - -Because Gnus is marking crosspostings read. You can control this with -the variable @code{gnus-use-cross-reference}. - -@node Gnus hangs for a long time, Learning more about Gnus, Catch-up is slow in Gnus, Mail and news -@section Why does Gnus hang for a long time when posting? -@cindex Hangs in Gnus -@cindex Gnus hangs while posting -@cindex Posting, Gnus hangs wile - -@email{tale@@uunet.uu.net, David Lawrence} explains: - -@quotation -The problem is almost always interaction between NNTP and C News. NNTP -POST asks C News's @code{inews} to not background itself but rather hang -around and give its exit status so it knows whether the post was successful. -(That wait will on some systems not return the exit status of the -waited for job is a different sort of problem.) It ends up taking a -long time because @code{inews} is calling @code{relaynews}, which often -waits for another @code{relaynews} to free the lock on the news system -so it can file the article. - -My preferred solution is to change @code{inews} to not call -@code{relaynews}, but rather use @code{newsspool}. This loses some -error-catching functionality, but is for the most part safe as -@code{inews} will detect a lot of the errors on its own. The C News -folks have sped up @code{inews}, too, so speed should look better to -most folks as that update propagates around. -@end quotation - -@node Learning more about Gnus, , Gnus hangs for a long time, Mail and news -@section Where can I find out more about Gnus? -@cindex FAQ for Gnus -@cindex Gnus FAQ -@cindex Learning more about Gnus - -For more information on Gnus, consult the Gnus manual and FAQ, which are -part of the Gnus distribution. - -@node Concept index, , Mail and news, Top -@unnumbered Concept Index -@printindex cp - -@contents -@bye - -@ignore - arch-tag: fee0d62d-06cf-43d8-ac21-123408eaf10f -@end ignore