# HG changeset patch # User Glenn Morris # Date 1189054130 0 # Node ID 6709874c817646853f4cee88ff7e0dd5d561db15 # Parent aed95b18afb23691054399c41d5e7c01f3a4687e Move here from ../../man diff -r aed95b18afb2 -r 6709874c8176 doc/emacs/trouble.texi --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/doc/emacs/trouble.texi Thu Sep 06 04:48:50 2007 +0000 @@ -0,0 +1,1066 @@ +@c This is part of the Emacs manual. +@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2001, 2002, +@c 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. +@c See file emacs.texi for copying conditions. +@iftex +@chapter Dealing with Common Problems + + If you type an Emacs command you did not intend, the results are often +mysterious. This chapter tells what you can do to cancel your mistake or +recover from a mysterious situation. Emacs bugs and system crashes are +also considered. +@end iftex + +@ifnottex +@raisesections +@end ifnottex + +@node Quitting, Lossage, Customization, Top +@section Quitting and Aborting +@cindex quitting + +@table @kbd +@item C-g +@itemx C-@key{BREAK} @r{(MS-DOS only)} +Quit: cancel running or partially typed command. +@item C-] +Abort innermost recursive editing level and cancel the command which +invoked it (@code{abort-recursive-edit}). +@item @key{ESC} @key{ESC} @key{ESC} +Either quit or abort, whichever makes sense (@code{keyboard-escape-quit}). +@item M-x top-level +Abort all recursive editing levels that are currently executing. +@item C-x u +Cancel a previously made change in the buffer contents (@code{undo}). +@end table + + There are two ways of canceling a command before it has finished: +@dfn{quitting} with @kbd{C-g}, and @dfn{aborting} with @kbd{C-]} or +@kbd{M-x top-level}. Quitting cancels a partially typed command, or +one which is still running. Aborting exits a recursive editing level +and cancels the command that invoked the recursive edit. +(@xref{Recursive Edit}.) + +@cindex quitting +@kindex C-g + Quitting with @kbd{C-g} is the way to get rid of a partially typed +command, or a numeric argument that you don't want. It also stops a +running command in the middle in a relatively safe way, so you can use +it if you accidentally give a command which takes a long time. In +particular, it is safe to quit out of a kill command; either your text +will @emph{all} still be in the buffer, or it will @emph{all} be in +the kill ring, or maybe both. Quitting an incremental search does +special things, documented under searching; it may take two successive +@kbd{C-g} characters to get out of a search (@pxref{Incremental +Search}). + + On MS-DOS, the character @kbd{C-@key{BREAK}} serves as a quit character +like @kbd{C-g}. The reason is that it is not feasible, on MS-DOS, to +recognize @kbd{C-g} while a command is running, between interactions +with the user. By contrast, it @emph{is} feasible to recognize +@kbd{C-@key{BREAK}} at all times. +@iftex +@xref{MS-DOS Keyboard,,,emacs-xtra, Specialized Emacs Features}. +@end iftex +@ifnottex +@xref{MS-DOS Keyboard}. +@end ifnottex + + +@findex keyboard-quit + @kbd{C-g} works by setting the variable @code{quit-flag} to @code{t} +the instant @kbd{C-g} is typed; Emacs Lisp checks this variable +frequently, and quits if it is non-@code{nil}. @kbd{C-g} is only +actually executed as a command if you type it while Emacs is waiting for +input. In that case, the command it runs is @code{keyboard-quit}. + + On a text terminal, if you quit with @kbd{C-g} a second time before +the first @kbd{C-g} is recognized, you activate the ``emergency +escape'' feature and return to the shell. @xref{Emergency Escape}. + +@cindex NFS and quitting + There are some situations where you cannot quit. When Emacs is +waiting for the operating system to do something, quitting is +impossible unless special pains are taken for the particular system +call within Emacs where the waiting occurs. We have done this for the +system calls that users are likely to want to quit from, but it's +possible you will a case not handled. In one very common +case---waiting for file input or output using NFS---Emacs itself knows +how to quit, but many NFS implementations simply do not allow user +programs to stop waiting for NFS when the NFS server is hung. + +@cindex aborting recursive edit +@findex abort-recursive-edit +@kindex C-] + Aborting with @kbd{C-]} (@code{abort-recursive-edit}) is used to get +out of a recursive editing level and cancel the command which invoked +it. Quitting with @kbd{C-g} does not do this, and could not do this, +because it is used to cancel a partially typed command @emph{within} the +recursive editing level. Both operations are useful. For example, if +you are in a recursive edit and type @kbd{C-u 8} to enter a numeric +argument, you can cancel that argument with @kbd{C-g} and remain in the +recursive edit. + +@findex keyboard-escape-quit +@kindex ESC ESC ESC + The sequence @kbd{@key{ESC} @key{ESC} @key{ESC}} +(@code{keyboard-escape-quit}) can either quit or abort. (We defined +it this way because @key{ESC} means ``get out'' in many PC programs.) +It can cancel a prefix argument, clear a selected region, or get out +of a Query Replace, like @kbd{C-g}. It can get out of the minibuffer +or a recursive edit, like @kbd{C-]}. It can also get out of splitting +the frame into multiple windows, as with @kbd{C-x 1}. One thing it +cannot do, however, is stop a command that is running. That's because +it executes as an ordinary command, and Emacs doesn't notice it until +it is ready for the next command. + +@findex top-level + The command @kbd{M-x top-level} is equivalent to ``enough'' @kbd{C-]} +commands to get you out of all the levels of recursive edits that you +are in. @kbd{C-]} gets you out one level at a time, but @kbd{M-x +top-level} goes out all levels at once. Both @kbd{C-]} and @kbd{M-x +top-level} are like all other commands, and unlike @kbd{C-g}, in that +they take effect only when Emacs is ready for a command. @kbd{C-]} is +an ordinary key and has its meaning only because of its binding in the +keymap. @xref{Recursive Edit}. + + @kbd{C-x u} (@code{undo}) is not strictly speaking a way of canceling +a command, but you can think of it as canceling a command that already +finished executing. @xref{Undo}, for more information +about the undo facility. + +@node Lossage, Bugs, Quitting, Top +@section Dealing with Emacs Trouble + + This section describes various conditions in which Emacs fails to work +normally, and how to recognize them and correct them. For a list of +additional problems you might encounter, see @ref{Bugs and problems, , +Bugs and problems, efaq, GNU Emacs FAQ}, and the file @file{etc/PROBLEMS} +in the Emacs distribution. Type @kbd{C-h C-f} to read the FAQ; type +@kbd{C-h C-e} to read the @file{PROBLEMS} file. + +@menu +* DEL Does Not Delete:: What to do if @key{DEL} doesn't delete. +* Stuck Recursive:: `[...]' in mode line around the parentheses. +* Screen Garbled:: Garbage on the screen. +* Text Garbled:: Garbage in the text. +* Memory Full:: How to cope when you run out of memory. +* After a Crash:: Recovering editing in an Emacs session that crashed. +* Emergency Escape:: Emergency escape--- + What to do if Emacs stops responding. +* Total Frustration:: When you are at your wits' end. +@end menu + +@node DEL Does Not Delete +@subsection If @key{DEL} Fails to Delete +@cindex @key{DEL} vs @key{BACKSPACE} +@cindex @key{BACKSPACE} vs @key{DEL} +@cindex usual erasure key + + Every keyboard has a large key, a little ways above the @key{RET} or +@key{ENTER} key, which you normally use outside Emacs to erase the +last character that you typed. We call this key @dfn{the usual +erasure key}. In Emacs, it is supposed to be equivalent to @key{DEL}, +and when Emacs is properly configured for your terminal, it translates +that key into the character @key{DEL}. + + When Emacs starts up on a graphical display, it determines +automatically which key should be @key{DEL}. In some unusual cases +Emacs gets the wrong information from the system. If the usual +erasure key deletes forwards instead of backwards, that is probably +what happened---Emacs ought to be treating the @key{DELETE} key as +@key{DEL}, but it isn't. + + On a graphical display, if the usual erasure key is labeled +@key{BACKSPACE} and there is a @key{DELETE} key elsewhere, but the +@key{DELETE} key deletes backward instead of forward, that too +suggests Emacs got the wrong information---but in the opposite sense. +It ought to be treating the @key{BACKSPACE} key as @key{DEL}, and +treating @key{DELETE} differently, but it isn't. + + On a text-only terminal, if you find the usual erasure key prompts +for a Help command, like @kbd{Control-h}, instead of deleting a +character, it means that key is actually sending the @key{BS} +character. Emacs ought to be treating @key{BS} as @key{DEL}, but it +isn't. + + In all of those cases, the immediate remedy is the same: use the +command @kbd{M-x normal-erase-is-backspace-mode}. This toggles +between the two modes that Emacs supports for handling @key{DEL}, so +if Emacs starts in the wrong mode, this should switch to the right +mode. On a text-only terminal, if you want to ask for help when +@key{BS} is treated as @key{DEL}, use @key{F1}; @kbd{C-?} may also +work, if it sends character code 127. + +@findex normal-erase-is-backspace-mode + To fix the problem automatically for every Emacs session, you can +put one of the following lines into your @file{.emacs} file +(@pxref{Init File}). For the first case above, where @key{DELETE} +deletes forwards instead of backwards, use this line to make +@key{DELETE} act as @key{DEL} (resulting in behavior compatible +with Emacs 20 and previous versions): + +@lisp +(normal-erase-is-backspace-mode 0) +@end lisp + +@noindent +For the other two cases, where @key{BACKSPACE} ought to act as +@key{DEL}, use this line: + +@lisp +(normal-erase-is-backspace-mode 1) +@end lisp + +@vindex normal-erase-is-backspace + Another way to fix the problem for every Emacs session is to +customize the variable @code{normal-erase-is-backspace}: the value +@code{t} specifies the mode where @key{BS} or @key{BACKSPACE} is +@key{DEL}, and @code{nil} specifies the other mode. @xref{Easy +Customization}. + + On a graphical display, it can also happen that the usual erasure key +is labeled @key{BACKSPACE}, there is a @key{DELETE} key elsewhere, and +both keys delete forward. This probably means that someone has +redefined your @key{BACKSPACE} key as a @key{DELETE} key. With X, +this is typically done with a command to the @code{xmodmap} program +when you start the server or log in. The most likely motive for this +customization was to support old versions of Emacs, so we recommend +you simply remove it now. + +@node Stuck Recursive +@subsection Recursive Editing Levels + + Recursive editing levels are important and useful features of Emacs, but +they can seem like malfunctions if you do not understand them. + + If the mode line has square brackets @samp{[@dots{}]} around the parentheses +that contain the names of the major and minor modes, you have entered a +recursive editing level. If you did not do this on purpose, or if you +don't understand what that means, you should just get out of the recursive +editing level. To do so, type @kbd{M-x top-level}. This is called getting +back to top level. @xref{Recursive Edit}. + +@node Screen Garbled +@subsection Garbage on the Screen + + If the text on a text terminal looks wrong, the first thing to do is +see whether it is wrong in the buffer. Type @kbd{C-l} to redisplay +the entire screen. If the screen appears correct after this, the +problem was entirely in the previous screen update. (Otherwise, see +the following section.) + + Display updating problems often result from an incorrect terminfo +entry for the terminal you are using. The file @file{etc/TERMS} in +the Emacs distribution gives the fixes for known problems of this +sort. @file{INSTALL} contains general advice for these problems in +one of its sections. To investigate the possibility that you have +this sort of problem, try Emacs on another terminal made by a +different manufacturer. If problems happen frequently on one kind of +terminal but not another kind, it is likely to be a bad terminfo entry, +though it could also be due to a bug in Emacs that appears for +terminals that have or that lack specific features. + +@node Text Garbled +@subsection Garbage in the Text + + If @kbd{C-l} shows that the text is wrong, first type @kbd{C-h l} to +see what commands you typed to produce the observed results. Then try +undoing the changes step by step using @kbd{C-x u}, until it gets back +to a state you consider correct. + + If a large portion of text appears to be missing at the beginning or +end of the buffer, check for the word @samp{Narrow} in the mode line. +If it appears, the text you don't see is probably still present, but +temporarily off-limits. To make it accessible again, type @kbd{C-x n +w}. @xref{Narrowing}. + +@node Memory Full +@subsection Running out of Memory +@cindex memory full +@cindex out of memory + + If you get the error message @samp{Virtual memory exceeded}, save +your modified buffers with @kbd{C-x s}. This method of saving them +has the smallest need for additional memory. Emacs keeps a reserve of +memory which it makes available when this error happens; that should +be enough to enable @kbd{C-x s} to complete its work. When the +reserve has been used, @samp{!MEM FULL!} appears at the beginning of +the mode line, indicating there is no more reserve. + + Once you have saved your modified buffers, you can exit this Emacs +session and start another, or you can use @kbd{M-x kill-some-buffers} +to free space in the current Emacs job. If this frees up sufficient +space, Emacs will refill its memory reserve, and @samp{!MEM FULL!} +will disappear from the mode line. That means you can safely go on +editing in the same Emacs session. + + Do not use @kbd{M-x buffer-menu} to save or kill buffers when you run +out of memory, because the buffer menu needs a fair amount of memory +itself, and the reserve supply may not be enough. + +@node After a Crash +@subsection Recovery After a Crash + + If Emacs or the computer crashes, you can recover the files you were +editing at the time of the crash from their auto-save files. To do +this, start Emacs again and type the command @kbd{M-x recover-session}. + + This command initially displays a buffer which lists interrupted +session files, each with its date. You must choose which session to +recover from. Typically the one you want is the most recent one. Move +point to the one you choose, and type @kbd{C-c C-c}. + + Then @code{recover-session} considers each of the files that you +were editing during that session; for each such file, it asks whether +to recover that file. If you answer @kbd{y} for a file, it shows the +dates of that file and its auto-save file, then asks once again +whether to recover that file. For the second question, you must +confirm with @kbd{yes}. If you do, Emacs visits the file but gets the +text from the auto-save file. + + When @code{recover-session} is done, the files you've chosen to +recover are present in Emacs buffers. You should then save them. Only +this---saving them---updates the files themselves. + + As a last resort, if you had buffers with content which were not +associated with any files, or if the autosave was not recent enough to +have recorded important changes, you can use the +@file{etc/emacs-buffer.gdb} script with GDB (the GNU Debugger) to +retrieve them from a core dump--provided that a core dump was saved, +and that the Emacs executable was not stripped of its debugging +symbols. + + As soon as you get the core dump, rename it to another name such as +@file{core.emacs}, so that another crash won't overwrite it. + + To use this script, run @code{gdb} with the file name of your Emacs +executable and the file name of the core dump, e.g. @samp{gdb +/usr/bin/emacs core.emacs}. At the @code{(gdb)} prompt, load the +recovery script: @samp{source /usr/src/emacs/etc/emacs-buffer.gdb}. +Then type the command @code{ybuffer-list} to see which buffers are +available. For each buffer, it lists a buffer number. To save a +buffer, use @code{ysave-buffer}; you specify the buffer number, and +the file name to write that buffer into. You should use a file name +which does not already exist; if the file does exist, the script does +not make a backup of its old contents. + +@node Emergency Escape +@subsection Emergency Escape + + On text-only terminals, the @dfn{emergency escape} feature suspends +Emacs immediately if you type @kbd{C-g} a second time before Emacs can +actually respond to the first one by quitting. This is so you can +always get out of GNU Emacs no matter how badly it might be hung. +When things are working properly, Emacs recognizes and handles the +first @kbd{C-g} so fast that the second one won't trigger emergency +escape. However, if some problem prevents Emacs from handling the +first @kbd{C-g} properly, then the second one will get you back to the +shell. + + When you resume Emacs after a suspension caused by emergency escape, +it asks two questions before going back to what it had been doing: + +@example +Auto-save? (y or n) +Abort (and dump core)? (y or n) +@end example + +@noindent +Answer each one with @kbd{y} or @kbd{n} followed by @key{RET}. + + Saying @kbd{y} to @samp{Auto-save?} causes immediate auto-saving of +all modified buffers in which auto-saving is enabled. Saying @kbd{n} +skips this. + + Saying @kbd{y} to @samp{Abort (and dump core)?} causes Emacs to +crash, dumping core. This is to enable a wizard to figure out why +Emacs was failing to quit in the first place. Execution does not +continue after a core dump. + + If you answer this question @kbd{n}, Emacs execution resumes. With +luck, Emacs will ultimately do the requested quit. If not, each +subsequent @kbd{C-g} invokes emergency escape again. + + If Emacs is not really hung, just slow, you may invoke the double +@kbd{C-g} feature without really meaning to. Then just resume and +answer @kbd{n} to both questions, and you will get back to the former +state. The quit you requested will happen by and by. + + Emergency escape is active only for text terminals. On graphical +displays, you can use the mouse to kill Emacs or switch to another +program. + + On MS-DOS, you must type @kbd{C-@key{BREAK}} (twice) to cause +emergency escape---but there are cases where it won't work, when +system call hangs or when Emacs is stuck in a tight loop in C code. + +@node Total Frustration +@subsection Help for Total Frustration +@cindex Eliza +@cindex doctor + + If using Emacs (or something else) becomes terribly frustrating and none +of the techniques described above solve the problem, Emacs can still help +you. + + First, if the Emacs you are using is not responding to commands, type +@kbd{C-g C-g} to get out of it and then start a new one. + +@findex doctor + Second, type @kbd{M-x doctor @key{RET}}. + + The Emacs psychotherapist will help you feel better. Each time you +say something to the psychotherapist, you must end it by typing +@key{RET} @key{RET}. This indicates you are finished typing. + +@node Bugs, Contributing, Lossage, Top +@section Reporting Bugs + +@cindex bugs + Sometimes you will encounter a bug in Emacs. Although we cannot +promise we can or will fix the bug, and we might not even agree that it +is a bug, we want to hear about problems you encounter. Often we agree +they are bugs and want to fix them. + + To make it possible for us to fix a bug, you must report it. In order +to do so effectively, you must know when and how to do it. + + Before reporting a bug, it is a good idea to see if it is already +known. You can find the list of known problems in the file +@file{etc/PROBLEMS} in the Emacs distribution; type @kbd{C-h C-e} to read +it. Some additional user-level problems can be found in @ref{Bugs and +problems, , Bugs and problems, efaq, GNU Emacs FAQ}. Looking up your +problem in these two documents might provide you with a solution or a +work-around, or give you additional information about related issues. + +@menu +* Criteria: Bug Criteria. Have you really found a bug? +* Understanding Bug Reporting:: How to report a bug effectively. +* Checklist:: Steps to follow for a good bug report. +* Sending Patches:: How to send a patch for GNU Emacs. +@end menu + +@node Bug Criteria +@subsection When Is There a Bug + + If Emacs accesses an invalid memory location (``segmentation +fault''), or exits with an operating system error message that +indicates a problem in the program (as opposed to something like +``disk full''), then it is certainly a bug. + + If Emacs updates the display in a way that does not correspond to what is +in the buffer, then it is certainly a bug. If a command seems to do the +wrong thing but the problem corrects itself if you type @kbd{C-l}, it is a +case of incorrect display updating. + + Taking forever to complete a command can be a bug, but you must make +certain that it was really Emacs's fault. Some commands simply take a +long time. Type @kbd{C-g} (@kbd{C-@key{BREAK}} on MS-DOS) and then @kbd{C-h l} +to see whether the input Emacs received was what you intended to type; +if the input was such that you @emph{know} it should have been processed +quickly, report a bug. If you don't know whether the command should +take a long time, find out by looking in the manual or by asking for +assistance. + + If a command you are familiar with causes an Emacs error message in a +case where its usual definition ought to be reasonable, it is probably a +bug. + + If a command does the wrong thing, that is a bug. But be sure you know +for certain what it ought to have done. If you aren't familiar with the +command, or don't know for certain how the command is supposed to work, +then it might actually be working right. Rather than jumping to +conclusions, show the problem to someone who knows for certain. + + Finally, a command's intended definition may not be the best +possible definition for editing with. This is a very important sort +of problem, but it is also a matter of judgment. Also, it is easy to +come to such a conclusion out of ignorance of some of the existing +features. It is probably best not to complain about such a problem +until you have checked the documentation in the usual ways, feel +confident that you understand it, and know for certain that what you +want is not available. Ask other Emacs users, too. If you are not +sure what the command is supposed to do after a careful reading of the +manual, check the index and glossary for any terms that may be +unclear. + + If after careful rereading of the manual you still do not understand +what the command should do, that indicates a bug in the manual, which +you should report. The manual's job is to make everything clear to +people who are not Emacs experts---including you. It is just as +important to report documentation bugs as program bugs. + + If the on-line documentation string of a function or variable disagrees +with the manual, one of them must be wrong; that is a bug. + +@node Understanding Bug Reporting +@subsection Understanding Bug Reporting + +@findex emacs-version + When you decide that there is a bug, it is important to report it and to +report it in a way which is useful. What is most useful is an exact +description of what commands you type, starting with the shell command to +run Emacs, until the problem happens. + + The most important principle in reporting a bug is to report +@emph{facts}. Hypotheses and verbal descriptions are no substitute for +the detailed raw data. Reporting the facts is straightforward, but many +people strain to posit explanations and report them instead of the +facts. If the explanations are based on guesses about how Emacs is +implemented, they will be useless; meanwhile, lacking the facts, we will +have no real information about the bug. + + For example, suppose that you type @kbd{C-x C-f /glorp/baz.ugh +@key{RET}}, visiting a file which (you know) happens to be rather +large, and Emacs displays @samp{I feel pretty today}. The best way to +report the bug is with a sentence like the preceding one, because it +gives all the facts. + + A bad way would be to assume that the problem is due to the size of +the file and say, ``I visited a large file, and Emacs displayed @samp{I +feel pretty today}.'' This is what we mean by ``guessing +explanations.'' The problem is just as likely to be due to the fact +that there is a @samp{z} in the file name. If this is so, then when we +got your report, we would try out the problem with some ``large file,'' +probably with no @samp{z} in its name, and not see any problem. There +is no way in the world that we could guess that we should try visiting a +file with a @samp{z} in its name. + + Alternatively, the problem might be due to the fact that the file starts +with exactly 25 spaces. For this reason, you should make sure that you +inform us of the exact contents of any file that is needed to reproduce the +bug. What if the problem only occurs when you have typed the @kbd{C-x C-a} +command previously? This is why we ask you to give the exact sequence of +characters you typed since starting the Emacs session. + + You should not even say ``visit a file'' instead of @kbd{C-x C-f} unless +you @emph{know} that it makes no difference which visiting command is used. +Similarly, rather than saying ``if I have three characters on the line,'' +say ``after I type @kbd{@key{RET} A B C @key{RET} C-p},'' if that is +the way you entered the text. + + So please don't guess any explanations when you report a bug. If you +want to actually @emph{debug} the problem, and report explanations that +are more than guesses, that is useful---but please include the facts as +well. + +@node Checklist +@subsection Checklist for Bug Reports + +@cindex reporting bugs + The best way to send a bug report is to mail it electronically to the +Emacs maintainers at @email{bug-gnu-emacs@@gnu.org}, or to +@email{emacs-pretest-bug@@gnu.org} if you are pretesting an Emacs beta +release. (If you want to suggest a change as an improvement, use the +same address.) + + If you'd like to read the bug reports, you can find them on the +newsgroup @samp{gnu.emacs.bug}; keep in mind, however, that as a +spectator you should not criticize anything about what you see there. +The purpose of bug reports is to give information to the Emacs +maintainers. Spectators are welcome only as long as they do not +interfere with this. In particular, some bug reports contain fairly +large amounts of data; spectators should not complain about this. + + Please do not post bug reports using netnews; mail is more reliable +than netnews about reporting your correct address, which we may need +in order to ask you for more information. If your data is more than +500,000 bytes, please don't include it directly in the bug report; +instead, offer to send it on request, or make it available by ftp and +say where. + +@findex report-emacs-bug + A convenient way to send a bug report for Emacs is to use the command +@kbd{M-x report-emacs-bug}. This sets up a mail buffer (@pxref{Sending +Mail}) and automatically inserts @emph{some} of the essential +information. However, it cannot supply all the necessary information; +you should still read and follow the guidelines below, so you can enter +the other crucial information by hand before you send the message. + + To enable maintainers to investigate a bug, your report +should include all these things: + +@itemize @bullet +@item +The version number of Emacs. Without this, we won't know whether there +is any point in looking for the bug in the current version of GNU +Emacs. + +You can get the version number by typing @kbd{M-x emacs-version +@key{RET}}. If that command does not work, you probably have something +other than GNU Emacs, so you will have to report the bug somewhere +else. + +@item +The type of machine you are using, and the operating system name and +version number. @kbd{M-x emacs-version @key{RET}} provides this +information too. Copy its output from the @samp{*Messages*} buffer, so +that you get it all and get it accurately. + +@item +The operands given to the @code{configure} command when Emacs was +installed. + +@item +A complete list of any modifications you have made to the Emacs source. +(We may not have time to investigate the bug unless it happens in an +unmodified Emacs. But if you've made modifications and you don't tell +us, you are sending us on a wild goose chase.) + +Be precise about these changes. A description in English is not +enough---send a context diff for them. + +Adding files of your own, or porting to another machine, is a +modification of the source. + +@item +Details of any other deviations from the standard procedure for installing +GNU Emacs. + +@item +The complete text of any files needed to reproduce the bug. + + If you can tell us a way to cause the problem without visiting any files, +please do so. This makes it much easier to debug. If you do need files, +make sure you arrange for us to see their exact contents. For example, it +can matter whether there are spaces at the ends of lines, or a +newline after the last line in the buffer (nothing ought to care whether +the last line is terminated, but try telling the bugs that). + +@item +The precise commands we need to type to reproduce the bug. + +@findex open-dribble-file +@cindex dribble file +@cindex logging keystrokes +The easy way to record the input to Emacs precisely is to write a +dribble file. To start the file, execute the Lisp expression + +@example +(open-dribble-file "~/dribble") +@end example + +@noindent +using @kbd{M-:} or from the @samp{*scratch*} buffer just after +starting Emacs. From then on, Emacs copies all your input to the +specified dribble file until the Emacs process is killed. + +@item +@findex open-termscript +@cindex termscript file +@cindex @env{TERM} environment variable +For possible display bugs, the terminal type (the value of environment +variable @env{TERM}), the complete termcap entry for the terminal from +@file{/etc/termcap} (since that file is not identical on all machines), +and the output that Emacs actually sent to the terminal. + +The way to collect the terminal output is to execute the Lisp expression + +@example +(open-termscript "~/termscript") +@end example + +@noindent +using @kbd{M-:} or from the @samp{*scratch*} buffer just after +starting Emacs. From then on, Emacs copies all terminal output to the +specified termscript file as well, until the Emacs process is killed. +If the problem happens when Emacs starts up, put this expression into +your @file{.emacs} file so that the termscript file will be open when +Emacs displays the screen for the first time. + +Be warned: it is often difficult, and sometimes impossible, to fix a +terminal-dependent bug without access to a terminal of the type that +stimulates the bug. + +@item +If non-@acronym{ASCII} text or internationalization is relevant, the locale that +was current when you started Emacs. On GNU/Linux and Unix systems, or +if you use a Posix-style shell such as Bash, you can use this shell +command to view the relevant values: + +@smallexample +echo LC_ALL=$LC_ALL LC_COLLATE=$LC_COLLATE LC_CTYPE=$LC_CTYPE \ + LC_MESSAGES=$LC_MESSAGES LC_TIME=$LC_TIME LANG=$LANG +@end smallexample + +Alternatively, use the @command{locale} command, if your system has it, +to display your locale settings. + +You can use the @kbd{M-!} command to execute these commands from +Emacs, and then copy the output from the @samp{*Messages*} buffer into +the bug report. Alternatively, @kbd{M-x getenv @key{RET} LC_ALL +@key{RET}} will display the value of @code{LC_ALL} in the echo area, and +you can copy its output from the @samp{*Messages*} buffer. + +@item +A description of what behavior you observe that you believe is +incorrect. For example, ``The Emacs process gets a fatal signal,'' or, +``The resulting text is as follows, which I think is wrong.'' + +Of course, if the bug is that Emacs gets a fatal signal, then one can't +miss it. But if the bug is incorrect text, the maintainer might fail to +notice what is wrong. Why leave it to chance? + +Even if the problem you experience is a fatal signal, you should still +say so explicitly. Suppose something strange is going on, such as, your +copy of the source is out of sync, or you have encountered a bug in the +C library on your system. (This has happened!) Your copy might crash +and the copy here might not. If you @emph{said} to expect a crash, then +when Emacs here fails to crash, we would know that the bug was not +happening. If you don't say to expect a crash, then we would not know +whether the bug was happening---we would not be able to draw any +conclusion from our observations. + +@item +If the bug is that the Emacs Manual or the Emacs Lisp Reference Manual +fails to describe the actual behavior of Emacs, or that the text is +confusing, copy in the text from the online manual which you think is +at fault. If the section is small, just the section name is enough. + +@item +If the manifestation of the bug is an Emacs error message, it is +important to report the precise text of the error message, and a +backtrace showing how the Lisp program in Emacs arrived at the error. + +To get the error message text accurately, copy it from the +@samp{*Messages*} buffer into the bug report. Copy all of it, not just +part. + +@findex toggle-debug-on-error +@pindex Edebug +To make a backtrace for the error, use @kbd{M-x toggle-debug-on-error} +before the error happens (that is to say, you must give that command +and then make the bug happen). This causes the error to start the Lisp +debugger, which shows you a backtrace. Copy the text of the +debugger's backtrace into the bug report. @xref{Debugger,, The Lisp +Debugger, elisp, the Emacs Lisp Reference Manual}, for information on +debugging Emacs Lisp programs with the Edebug package. + +This use of the debugger is possible only if you know how to make the +bug happen again. If you can't make it happen again, at least copy +the whole error message. + +@item +Check whether any programs you have loaded into the Lisp world, +including your @file{.emacs} file, set any variables that may affect the +functioning of Emacs. Also, see whether the problem happens in a +freshly started Emacs without loading your @file{.emacs} file (start +Emacs with the @code{-q} switch to prevent loading the init file). If +the problem does @emph{not} occur then, you must report the precise +contents of any programs that you must load into the Lisp world in order +to cause the problem to occur. + +@item +If the problem does depend on an init file or other Lisp programs that +are not part of the standard Emacs system, then you should make sure it +is not a bug in those programs by complaining to their maintainers +first. After they verify that they are using Emacs in a way that is +supposed to work, they should report the bug. + +@item +If you wish to mention something in the GNU Emacs source, show the line +of code with a few lines of context. Don't just give a line number. + +The line numbers in the development sources don't match those in your +sources. It would take extra work for the maintainers to determine what +code is in your version at a given line number, and we could not be +certain. + +@item +Additional information from a C debugger such as GDB might enable +someone to find a problem on a machine which he does not have available. +If you don't know how to use GDB, please read the GDB manual---it is not +very long, and using GDB is easy. You can find the GDB distribution, +including the GDB manual in online form, in most of the same places you +can find the Emacs distribution. To run Emacs under GDB, you should +switch to the @file{src} subdirectory in which Emacs was compiled, then +do @samp{gdb emacs}. It is important for the directory @file{src} to be +current so that GDB will read the @file{.gdbinit} file in this +directory. + +However, you need to think when you collect the additional information +if you want it to show what causes the bug. + +@cindex backtrace for bug reports +For example, many people send just a backtrace, but that is not very +useful by itself. A simple backtrace with arguments often conveys +little about what is happening inside GNU Emacs, because most of the +arguments listed in the backtrace are pointers to Lisp objects. The +numeric values of these pointers have no significance whatever; all that +matters is the contents of the objects they point to (and most of the +contents are themselves pointers). + +@findex debug_print +To provide useful information, you need to show the values of Lisp +objects in Lisp notation. Do this for each variable which is a Lisp +object, in several stack frames near the bottom of the stack. Look at +the source to see which variables are Lisp objects, because the debugger +thinks of them as integers. + +To show a variable's value in Lisp syntax, first print its value, then +use the user-defined GDB command @code{pr} to print the Lisp object in +Lisp syntax. (If you must use another debugger, call the function +@code{debug_print} with the object as an argument.) The @code{pr} +command is defined by the file @file{.gdbinit}, and it works only if you +are debugging a running process (not with a core dump). + +To make Lisp errors stop Emacs and return to GDB, put a breakpoint at +@code{Fsignal}. + +For a short listing of Lisp functions running, type the GDB +command @code{xbacktrace}. + +The file @file{.gdbinit} defines several other commands that are useful +for examining the data types and contents of Lisp objects. Their names +begin with @samp{x}. These commands work at a lower level than +@code{pr}, and are less convenient, but they may work even when +@code{pr} does not, such as when debugging a core dump or when Emacs has +had a fatal signal. + +@cindex debugging Emacs, tricks and techniques +More detailed advice and other useful techniques for debugging Emacs +are available in the file @file{etc/DEBUG} in the Emacs distribution. +That file also includes instructions for investigating problems +whereby Emacs stops responding (many people assume that Emacs is +``hung,'' whereas in fact it might be in an infinite loop). + +To find the file @file{etc/DEBUG} in your Emacs installation, use the +directory name stored in the variable @code{data-directory}. +@end itemize + +Here are some things that are not necessary in a bug report: + +@itemize @bullet +@item +A description of the envelope of the bug---this is not necessary for a +reproducible bug. + +Often people who encounter a bug spend a lot of time investigating +which changes to the input file will make the bug go away and which +changes will not affect it. + +This is often time-consuming and not very useful, because the way we +will find the bug is by running a single example under the debugger +with breakpoints, not by pure deduction from a series of examples. +You might as well save time by not searching for additional examples. +It is better to send the bug report right away, go back to editing, +and find another bug to report. + +Of course, if you can find a simpler example to report @emph{instead} of +the original one, that is a convenience. Errors in the output will be +easier to spot, running under the debugger will take less time, etc. + +However, simplification is not vital; if you can't do this or don't have +time to try, please report the bug with your original test case. + +@item +A core dump file. + +Debugging the core dump might be useful, but it can only be done on +your machine, with your Emacs executable. Therefore, sending the core +dump file to the Emacs maintainers won't be useful. Above all, don't +include the core file in an email bug report! Such a large message +can be extremely inconvenient. + +@item +A system-call trace of Emacs execution. + +System-call traces are very useful for certain special kinds of +debugging, but in most cases they give little useful information. It is +therefore strange that many people seem to think that @emph{the} way to +report information about a crash is to send a system-call trace. Perhaps +this is a habit formed from experience debugging programs that don't +have source code or debugging symbols. + +In most programs, a backtrace is normally far, far more informative than +a system-call trace. Even in Emacs, a simple backtrace is generally +more informative, though to give full information you should supplement +the backtrace by displaying variable values and printing them as Lisp +objects with @code{pr} (see above). + +@item +A patch for the bug. + +A patch for the bug is useful if it is a good one. But don't omit the +other information that a bug report needs, such as the test case, on the +assumption that a patch is sufficient. We might see problems with your +patch and decide to fix the problem another way, or we might not +understand it at all. And if we can't understand what bug you are +trying to fix, or why your patch should be an improvement, we mustn't +install it. + +@ifnottex +@xref{Sending Patches}, for guidelines on how to make it easy for us to +understand and install your patches. +@end ifnottex + +@item +A guess about what the bug is or what it depends on. + +Such guesses are usually wrong. Even experts can't guess right about +such things without first using the debugger to find the facts. +@end itemize + +@node Sending Patches +@subsection Sending Patches for GNU Emacs + +@cindex sending patches for GNU Emacs +@cindex patches, sending + If you would like to write bug fixes or improvements for GNU Emacs, +that is very helpful. When you send your changes, please follow these +guidelines to make it easy for the maintainers to use them. If you +don't follow these guidelines, your information might still be useful, +but using it will take extra work. Maintaining GNU Emacs is a lot of +work in the best of circumstances, and we can't keep up unless you do +your best to help. + +@itemize @bullet +@item +Send an explanation with your changes of what problem they fix or what +improvement they bring about. For a bug fix, just include a copy of the +bug report, and explain why the change fixes the bug. + +(Referring to a bug report is not as good as including it, because then +we will have to look it up, and we have probably already deleted it if +we've already fixed the bug.) + +@item +Always include a proper bug report for the problem you think you have +fixed. We need to convince ourselves that the change is right before +installing it. Even if it is correct, we might have trouble +understanding it if we don't have a way to reproduce the problem. + +@item +Include all the comments that are appropriate to help people reading the +source in the future understand why this change was needed. + +@item +Don't mix together changes made for different reasons. +Send them @emph{individually}. + +If you make two changes for separate reasons, then we might not want to +install them both. We might want to install just one. If you send them +all jumbled together in a single set of diffs, we have to do extra work +to disentangle them---to figure out which parts of the change serve +which purpose. If we don't have time for this, we might have to ignore +your changes entirely. + +If you send each change as soon as you have written it, with its own +explanation, then two changes never get tangled up, and we can consider +each one properly without any extra work to disentangle them. + +@item +Send each change as soon as that change is finished. Sometimes people +think they are helping us by accumulating many changes to send them all +together. As explained above, this is absolutely the worst thing you +could do. + +Since you should send each change separately, you might as well send it +right away. That gives us the option of installing it immediately if it +is important. + +@item +Use @samp{diff -c} to make your diffs. Diffs without context are hard +to install reliably. More than that, they are hard to study; we must +always study a patch to decide whether we want to install it. Unidiff +format is better than contextless diffs, but not as easy to read as +@samp{-c} format. + +If you have GNU diff, use @samp{diff -c -F'^[_a-zA-Z0-9$]+ *('} when +making diffs of C code. This shows the name of the function that each +change occurs in. + +@item +Avoid any ambiguity as to which is the old version and which is the new. +Please make the old version the first argument to diff, and the new +version the second argument. And please give one version or the other a +name that indicates whether it is the old version or your new changed +one. + +@item +Write the change log entries for your changes. This is both to save us +the extra work of writing them, and to help explain your changes so we +can understand them. + +The purpose of the change log is to show people where to find what was +changed. So you need to be specific about what functions you changed; +in large functions, it's often helpful to indicate where within the +function the change was. + +On the other hand, once you have shown people where to find the change, +you need not explain its purpose in the change log. Thus, if you add a +new function, all you need to say about it is that it is new. If you +feel that the purpose needs explaining, it probably does---but put the +explanation in comments in the code. It will be more useful there. + +Please read the @file{ChangeLog} files in the @file{src} and +@file{lisp} directories to see what sorts of information to put in, +and to learn the style that we use. @xref{Change Log}. + +@item +When you write the fix, keep in mind that we can't install a change that +would break other systems. Please think about what effect your change +will have if compiled on another type of system. + +Sometimes people send fixes that @emph{might} be an improvement in +general---but it is hard to be sure of this. It's hard to install +such changes because we have to study them very carefully. Of course, +a good explanation of the reasoning by which you concluded the change +was correct can help convince us. + +The safest changes are changes to the configuration files for a +particular machine. These are safe because they can't create new bugs +on other machines. + +Please help us keep up with the workload by designing the patch in a +form that is clearly safe to install. +@end itemize + +@node Contributing, Service, Bugs, Top +@section Contributing to Emacs Development + +If you would like to help pretest Emacs releases to assure they work +well, or if you would like to work on improving Emacs, please contact +the maintainers at @email{emacs-devel@@gnu.org}. A pretester +should be prepared to investigate bugs as well as report them. If you'd +like to work on improving Emacs, please ask for suggested projects or +suggest your own ideas. + +If you have already written an improvement, please tell us about it. If +you have not yet started work, it is useful to contact +@email{emacs-devel@@gnu.org} before you start; it might be +possible to suggest ways to make your extension fit in better with the +rest of Emacs. + +The development version of Emacs can be downloaded from the CVS +repository where it is actively maintained by a group of developers. +See the Emacs project page +@url{http://savannah.gnu.org/projects/emacs/} for details. + +@node Service, Copying, Contributing, Top +@section How To Get Help with GNU Emacs + +If you need help installing, using or changing GNU Emacs, there are two +ways to find it: + +@itemize @bullet +@item +Send a message to the mailing list +@email{help-gnu-emacs@@gnu.org}, or post your request on +newsgroup @code{gnu.emacs.help}. (This mailing list and newsgroup +interconnect, so it does not matter which one you use.) + +@item +Look in the service directory for someone who might help you for a fee. +The service directory is found in the file named @file{etc/SERVICE} in the +Emacs distribution. +@end itemize + +@ifnottex +@lowersections +@end ifnottex + +@ignore + arch-tag: c9cba76d-b2cb-4e0c-ae3f-19d5ef35817c +@end ignore