# HG changeset patch # User Glenn Morris # Date 1189053671 0 # Node ID 81449b7e624b5a3e38108c530212c7968501f6bb # Parent ac4ff6c389505dfc01062fd426dde10d41066bfe Move to ../doc/emacs/, misc/ diff -r ac4ff6c38950 -r 81449b7e624b man/trouble.texi --- a/man/trouble.texi Thu Sep 06 04:41:05 2007 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1066 +0,0 @@ -@c This is part of the Emacs manual. -@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2001, 2002, -@c 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. -@c See file emacs.texi for copying conditions. -@iftex -@chapter Dealing with Common Problems - - If you type an Emacs command you did not intend, the results are often -mysterious. This chapter tells what you can do to cancel your mistake or -recover from a mysterious situation. Emacs bugs and system crashes are -also considered. -@end iftex - -@ifnottex -@raisesections -@end ifnottex - -@node Quitting, Lossage, Customization, Top -@section Quitting and Aborting -@cindex quitting - -@table @kbd -@item C-g -@itemx C-@key{BREAK} @r{(MS-DOS only)} -Quit: cancel running or partially typed command. -@item C-] -Abort innermost recursive editing level and cancel the command which -invoked it (@code{abort-recursive-edit}). -@item @key{ESC} @key{ESC} @key{ESC} -Either quit or abort, whichever makes sense (@code{keyboard-escape-quit}). -@item M-x top-level -Abort all recursive editing levels that are currently executing. -@item C-x u -Cancel a previously made change in the buffer contents (@code{undo}). -@end table - - There are two ways of canceling a command before it has finished: -@dfn{quitting} with @kbd{C-g}, and @dfn{aborting} with @kbd{C-]} or -@kbd{M-x top-level}. Quitting cancels a partially typed command, or -one which is still running. Aborting exits a recursive editing level -and cancels the command that invoked the recursive edit. -(@xref{Recursive Edit}.) - -@cindex quitting -@kindex C-g - Quitting with @kbd{C-g} is the way to get rid of a partially typed -command, or a numeric argument that you don't want. It also stops a -running command in the middle in a relatively safe way, so you can use -it if you accidentally give a command which takes a long time. In -particular, it is safe to quit out of a kill command; either your text -will @emph{all} still be in the buffer, or it will @emph{all} be in -the kill ring, or maybe both. Quitting an incremental search does -special things, documented under searching; it may take two successive -@kbd{C-g} characters to get out of a search (@pxref{Incremental -Search}). - - On MS-DOS, the character @kbd{C-@key{BREAK}} serves as a quit character -like @kbd{C-g}. The reason is that it is not feasible, on MS-DOS, to -recognize @kbd{C-g} while a command is running, between interactions -with the user. By contrast, it @emph{is} feasible to recognize -@kbd{C-@key{BREAK}} at all times. -@iftex -@xref{MS-DOS Keyboard,,,emacs-xtra, Specialized Emacs Features}. -@end iftex -@ifnottex -@xref{MS-DOS Keyboard}. -@end ifnottex - - -@findex keyboard-quit - @kbd{C-g} works by setting the variable @code{quit-flag} to @code{t} -the instant @kbd{C-g} is typed; Emacs Lisp checks this variable -frequently, and quits if it is non-@code{nil}. @kbd{C-g} is only -actually executed as a command if you type it while Emacs is waiting for -input. In that case, the command it runs is @code{keyboard-quit}. - - On a text terminal, if you quit with @kbd{C-g} a second time before -the first @kbd{C-g} is recognized, you activate the ``emergency -escape'' feature and return to the shell. @xref{Emergency Escape}. - -@cindex NFS and quitting - There are some situations where you cannot quit. When Emacs is -waiting for the operating system to do something, quitting is -impossible unless special pains are taken for the particular system -call within Emacs where the waiting occurs. We have done this for the -system calls that users are likely to want to quit from, but it's -possible you will a case not handled. In one very common -case---waiting for file input or output using NFS---Emacs itself knows -how to quit, but many NFS implementations simply do not allow user -programs to stop waiting for NFS when the NFS server is hung. - -@cindex aborting recursive edit -@findex abort-recursive-edit -@kindex C-] - Aborting with @kbd{C-]} (@code{abort-recursive-edit}) is used to get -out of a recursive editing level and cancel the command which invoked -it. Quitting with @kbd{C-g} does not do this, and could not do this, -because it is used to cancel a partially typed command @emph{within} the -recursive editing level. Both operations are useful. For example, if -you are in a recursive edit and type @kbd{C-u 8} to enter a numeric -argument, you can cancel that argument with @kbd{C-g} and remain in the -recursive edit. - -@findex keyboard-escape-quit -@kindex ESC ESC ESC - The sequence @kbd{@key{ESC} @key{ESC} @key{ESC}} -(@code{keyboard-escape-quit}) can either quit or abort. (We defined -it this way because @key{ESC} means ``get out'' in many PC programs.) -It can cancel a prefix argument, clear a selected region, or get out -of a Query Replace, like @kbd{C-g}. It can get out of the minibuffer -or a recursive edit, like @kbd{C-]}. It can also get out of splitting -the frame into multiple windows, as with @kbd{C-x 1}. One thing it -cannot do, however, is stop a command that is running. That's because -it executes as an ordinary command, and Emacs doesn't notice it until -it is ready for the next command. - -@findex top-level - The command @kbd{M-x top-level} is equivalent to ``enough'' @kbd{C-]} -commands to get you out of all the levels of recursive edits that you -are in. @kbd{C-]} gets you out one level at a time, but @kbd{M-x -top-level} goes out all levels at once. Both @kbd{C-]} and @kbd{M-x -top-level} are like all other commands, and unlike @kbd{C-g}, in that -they take effect only when Emacs is ready for a command. @kbd{C-]} is -an ordinary key and has its meaning only because of its binding in the -keymap. @xref{Recursive Edit}. - - @kbd{C-x u} (@code{undo}) is not strictly speaking a way of canceling -a command, but you can think of it as canceling a command that already -finished executing. @xref{Undo}, for more information -about the undo facility. - -@node Lossage, Bugs, Quitting, Top -@section Dealing with Emacs Trouble - - This section describes various conditions in which Emacs fails to work -normally, and how to recognize them and correct them. For a list of -additional problems you might encounter, see @ref{Bugs and problems, , -Bugs and problems, efaq, GNU Emacs FAQ}, and the file @file{etc/PROBLEMS} -in the Emacs distribution. Type @kbd{C-h C-f} to read the FAQ; type -@kbd{C-h C-e} to read the @file{PROBLEMS} file. - -@menu -* DEL Does Not Delete:: What to do if @key{DEL} doesn't delete. -* Stuck Recursive:: `[...]' in mode line around the parentheses. -* Screen Garbled:: Garbage on the screen. -* Text Garbled:: Garbage in the text. -* Memory Full:: How to cope when you run out of memory. -* After a Crash:: Recovering editing in an Emacs session that crashed. -* Emergency Escape:: Emergency escape--- - What to do if Emacs stops responding. -* Total Frustration:: When you are at your wits' end. -@end menu - -@node DEL Does Not Delete -@subsection If @key{DEL} Fails to Delete -@cindex @key{DEL} vs @key{BACKSPACE} -@cindex @key{BACKSPACE} vs @key{DEL} -@cindex usual erasure key - - Every keyboard has a large key, a little ways above the @key{RET} or -@key{ENTER} key, which you normally use outside Emacs to erase the -last character that you typed. We call this key @dfn{the usual -erasure key}. In Emacs, it is supposed to be equivalent to @key{DEL}, -and when Emacs is properly configured for your terminal, it translates -that key into the character @key{DEL}. - - When Emacs starts up on a graphical display, it determines -automatically which key should be @key{DEL}. In some unusual cases -Emacs gets the wrong information from the system. If the usual -erasure key deletes forwards instead of backwards, that is probably -what happened---Emacs ought to be treating the @key{DELETE} key as -@key{DEL}, but it isn't. - - On a graphical display, if the usual erasure key is labeled -@key{BACKSPACE} and there is a @key{DELETE} key elsewhere, but the -@key{DELETE} key deletes backward instead of forward, that too -suggests Emacs got the wrong information---but in the opposite sense. -It ought to be treating the @key{BACKSPACE} key as @key{DEL}, and -treating @key{DELETE} differently, but it isn't. - - On a text-only terminal, if you find the usual erasure key prompts -for a Help command, like @kbd{Control-h}, instead of deleting a -character, it means that key is actually sending the @key{BS} -character. Emacs ought to be treating @key{BS} as @key{DEL}, but it -isn't. - - In all of those cases, the immediate remedy is the same: use the -command @kbd{M-x normal-erase-is-backspace-mode}. This toggles -between the two modes that Emacs supports for handling @key{DEL}, so -if Emacs starts in the wrong mode, this should switch to the right -mode. On a text-only terminal, if you want to ask for help when -@key{BS} is treated as @key{DEL}, use @key{F1}; @kbd{C-?} may also -work, if it sends character code 127. - -@findex normal-erase-is-backspace-mode - To fix the problem automatically for every Emacs session, you can -put one of the following lines into your @file{.emacs} file -(@pxref{Init File}). For the first case above, where @key{DELETE} -deletes forwards instead of backwards, use this line to make -@key{DELETE} act as @key{DEL} (resulting in behavior compatible -with Emacs 20 and previous versions): - -@lisp -(normal-erase-is-backspace-mode 0) -@end lisp - -@noindent -For the other two cases, where @key{BACKSPACE} ought to act as -@key{DEL}, use this line: - -@lisp -(normal-erase-is-backspace-mode 1) -@end lisp - -@vindex normal-erase-is-backspace - Another way to fix the problem for every Emacs session is to -customize the variable @code{normal-erase-is-backspace}: the value -@code{t} specifies the mode where @key{BS} or @key{BACKSPACE} is -@key{DEL}, and @code{nil} specifies the other mode. @xref{Easy -Customization}. - - On a graphical display, it can also happen that the usual erasure key -is labeled @key{BACKSPACE}, there is a @key{DELETE} key elsewhere, and -both keys delete forward. This probably means that someone has -redefined your @key{BACKSPACE} key as a @key{DELETE} key. With X, -this is typically done with a command to the @code{xmodmap} program -when you start the server or log in. The most likely motive for this -customization was to support old versions of Emacs, so we recommend -you simply remove it now. - -@node Stuck Recursive -@subsection Recursive Editing Levels - - Recursive editing levels are important and useful features of Emacs, but -they can seem like malfunctions if you do not understand them. - - If the mode line has square brackets @samp{[@dots{}]} around the parentheses -that contain the names of the major and minor modes, you have entered a -recursive editing level. If you did not do this on purpose, or if you -don't understand what that means, you should just get out of the recursive -editing level. To do so, type @kbd{M-x top-level}. This is called getting -back to top level. @xref{Recursive Edit}. - -@node Screen Garbled -@subsection Garbage on the Screen - - If the text on a text terminal looks wrong, the first thing to do is -see whether it is wrong in the buffer. Type @kbd{C-l} to redisplay -the entire screen. If the screen appears correct after this, the -problem was entirely in the previous screen update. (Otherwise, see -the following section.) - - Display updating problems often result from an incorrect terminfo -entry for the terminal you are using. The file @file{etc/TERMS} in -the Emacs distribution gives the fixes for known problems of this -sort. @file{INSTALL} contains general advice for these problems in -one of its sections. To investigate the possibility that you have -this sort of problem, try Emacs on another terminal made by a -different manufacturer. If problems happen frequently on one kind of -terminal but not another kind, it is likely to be a bad terminfo entry, -though it could also be due to a bug in Emacs that appears for -terminals that have or that lack specific features. - -@node Text Garbled -@subsection Garbage in the Text - - If @kbd{C-l} shows that the text is wrong, first type @kbd{C-h l} to -see what commands you typed to produce the observed results. Then try -undoing the changes step by step using @kbd{C-x u}, until it gets back -to a state you consider correct. - - If a large portion of text appears to be missing at the beginning or -end of the buffer, check for the word @samp{Narrow} in the mode line. -If it appears, the text you don't see is probably still present, but -temporarily off-limits. To make it accessible again, type @kbd{C-x n -w}. @xref{Narrowing}. - -@node Memory Full -@subsection Running out of Memory -@cindex memory full -@cindex out of memory - - If you get the error message @samp{Virtual memory exceeded}, save -your modified buffers with @kbd{C-x s}. This method of saving them -has the smallest need for additional memory. Emacs keeps a reserve of -memory which it makes available when this error happens; that should -be enough to enable @kbd{C-x s} to complete its work. When the -reserve has been used, @samp{!MEM FULL!} appears at the beginning of -the mode line, indicating there is no more reserve. - - Once you have saved your modified buffers, you can exit this Emacs -session and start another, or you can use @kbd{M-x kill-some-buffers} -to free space in the current Emacs job. If this frees up sufficient -space, Emacs will refill its memory reserve, and @samp{!MEM FULL!} -will disappear from the mode line. That means you can safely go on -editing in the same Emacs session. - - Do not use @kbd{M-x buffer-menu} to save or kill buffers when you run -out of memory, because the buffer menu needs a fair amount of memory -itself, and the reserve supply may not be enough. - -@node After a Crash -@subsection Recovery After a Crash - - If Emacs or the computer crashes, you can recover the files you were -editing at the time of the crash from their auto-save files. To do -this, start Emacs again and type the command @kbd{M-x recover-session}. - - This command initially displays a buffer which lists interrupted -session files, each with its date. You must choose which session to -recover from. Typically the one you want is the most recent one. Move -point to the one you choose, and type @kbd{C-c C-c}. - - Then @code{recover-session} considers each of the files that you -were editing during that session; for each such file, it asks whether -to recover that file. If you answer @kbd{y} for a file, it shows the -dates of that file and its auto-save file, then asks once again -whether to recover that file. For the second question, you must -confirm with @kbd{yes}. If you do, Emacs visits the file but gets the -text from the auto-save file. - - When @code{recover-session} is done, the files you've chosen to -recover are present in Emacs buffers. You should then save them. Only -this---saving them---updates the files themselves. - - As a last resort, if you had buffers with content which were not -associated with any files, or if the autosave was not recent enough to -have recorded important changes, you can use the -@file{etc/emacs-buffer.gdb} script with GDB (the GNU Debugger) to -retrieve them from a core dump--provided that a core dump was saved, -and that the Emacs executable was not stripped of its debugging -symbols. - - As soon as you get the core dump, rename it to another name such as -@file{core.emacs}, so that another crash won't overwrite it. - - To use this script, run @code{gdb} with the file name of your Emacs -executable and the file name of the core dump, e.g. @samp{gdb -/usr/bin/emacs core.emacs}. At the @code{(gdb)} prompt, load the -recovery script: @samp{source /usr/src/emacs/etc/emacs-buffer.gdb}. -Then type the command @code{ybuffer-list} to see which buffers are -available. For each buffer, it lists a buffer number. To save a -buffer, use @code{ysave-buffer}; you specify the buffer number, and -the file name to write that buffer into. You should use a file name -which does not already exist; if the file does exist, the script does -not make a backup of its old contents. - -@node Emergency Escape -@subsection Emergency Escape - - On text-only terminals, the @dfn{emergency escape} feature suspends -Emacs immediately if you type @kbd{C-g} a second time before Emacs can -actually respond to the first one by quitting. This is so you can -always get out of GNU Emacs no matter how badly it might be hung. -When things are working properly, Emacs recognizes and handles the -first @kbd{C-g} so fast that the second one won't trigger emergency -escape. However, if some problem prevents Emacs from handling the -first @kbd{C-g} properly, then the second one will get you back to the -shell. - - When you resume Emacs after a suspension caused by emergency escape, -it asks two questions before going back to what it had been doing: - -@example -Auto-save? (y or n) -Abort (and dump core)? (y or n) -@end example - -@noindent -Answer each one with @kbd{y} or @kbd{n} followed by @key{RET}. - - Saying @kbd{y} to @samp{Auto-save?} causes immediate auto-saving of -all modified buffers in which auto-saving is enabled. Saying @kbd{n} -skips this. - - Saying @kbd{y} to @samp{Abort (and dump core)?} causes Emacs to -crash, dumping core. This is to enable a wizard to figure out why -Emacs was failing to quit in the first place. Execution does not -continue after a core dump. - - If you answer this question @kbd{n}, Emacs execution resumes. With -luck, Emacs will ultimately do the requested quit. If not, each -subsequent @kbd{C-g} invokes emergency escape again. - - If Emacs is not really hung, just slow, you may invoke the double -@kbd{C-g} feature without really meaning to. Then just resume and -answer @kbd{n} to both questions, and you will get back to the former -state. The quit you requested will happen by and by. - - Emergency escape is active only for text terminals. On graphical -displays, you can use the mouse to kill Emacs or switch to another -program. - - On MS-DOS, you must type @kbd{C-@key{BREAK}} (twice) to cause -emergency escape---but there are cases where it won't work, when -system call hangs or when Emacs is stuck in a tight loop in C code. - -@node Total Frustration -@subsection Help for Total Frustration -@cindex Eliza -@cindex doctor - - If using Emacs (or something else) becomes terribly frustrating and none -of the techniques described above solve the problem, Emacs can still help -you. - - First, if the Emacs you are using is not responding to commands, type -@kbd{C-g C-g} to get out of it and then start a new one. - -@findex doctor - Second, type @kbd{M-x doctor @key{RET}}. - - The Emacs psychotherapist will help you feel better. Each time you -say something to the psychotherapist, you must end it by typing -@key{RET} @key{RET}. This indicates you are finished typing. - -@node Bugs, Contributing, Lossage, Top -@section Reporting Bugs - -@cindex bugs - Sometimes you will encounter a bug in Emacs. Although we cannot -promise we can or will fix the bug, and we might not even agree that it -is a bug, we want to hear about problems you encounter. Often we agree -they are bugs and want to fix them. - - To make it possible for us to fix a bug, you must report it. In order -to do so effectively, you must know when and how to do it. - - Before reporting a bug, it is a good idea to see if it is already -known. You can find the list of known problems in the file -@file{etc/PROBLEMS} in the Emacs distribution; type @kbd{C-h C-e} to read -it. Some additional user-level problems can be found in @ref{Bugs and -problems, , Bugs and problems, efaq, GNU Emacs FAQ}. Looking up your -problem in these two documents might provide you with a solution or a -work-around, or give you additional information about related issues. - -@menu -* Criteria: Bug Criteria. Have you really found a bug? -* Understanding Bug Reporting:: How to report a bug effectively. -* Checklist:: Steps to follow for a good bug report. -* Sending Patches:: How to send a patch for GNU Emacs. -@end menu - -@node Bug Criteria -@subsection When Is There a Bug - - If Emacs accesses an invalid memory location (``segmentation -fault''), or exits with an operating system error message that -indicates a problem in the program (as opposed to something like -``disk full''), then it is certainly a bug. - - If Emacs updates the display in a way that does not correspond to what is -in the buffer, then it is certainly a bug. If a command seems to do the -wrong thing but the problem corrects itself if you type @kbd{C-l}, it is a -case of incorrect display updating. - - Taking forever to complete a command can be a bug, but you must make -certain that it was really Emacs's fault. Some commands simply take a -long time. Type @kbd{C-g} (@kbd{C-@key{BREAK}} on MS-DOS) and then @kbd{C-h l} -to see whether the input Emacs received was what you intended to type; -if the input was such that you @emph{know} it should have been processed -quickly, report a bug. If you don't know whether the command should -take a long time, find out by looking in the manual or by asking for -assistance. - - If a command you are familiar with causes an Emacs error message in a -case where its usual definition ought to be reasonable, it is probably a -bug. - - If a command does the wrong thing, that is a bug. But be sure you know -for certain what it ought to have done. If you aren't familiar with the -command, or don't know for certain how the command is supposed to work, -then it might actually be working right. Rather than jumping to -conclusions, show the problem to someone who knows for certain. - - Finally, a command's intended definition may not be the best -possible definition for editing with. This is a very important sort -of problem, but it is also a matter of judgment. Also, it is easy to -come to such a conclusion out of ignorance of some of the existing -features. It is probably best not to complain about such a problem -until you have checked the documentation in the usual ways, feel -confident that you understand it, and know for certain that what you -want is not available. Ask other Emacs users, too. If you are not -sure what the command is supposed to do after a careful reading of the -manual, check the index and glossary for any terms that may be -unclear. - - If after careful rereading of the manual you still do not understand -what the command should do, that indicates a bug in the manual, which -you should report. The manual's job is to make everything clear to -people who are not Emacs experts---including you. It is just as -important to report documentation bugs as program bugs. - - If the on-line documentation string of a function or variable disagrees -with the manual, one of them must be wrong; that is a bug. - -@node Understanding Bug Reporting -@subsection Understanding Bug Reporting - -@findex emacs-version - When you decide that there is a bug, it is important to report it and to -report it in a way which is useful. What is most useful is an exact -description of what commands you type, starting with the shell command to -run Emacs, until the problem happens. - - The most important principle in reporting a bug is to report -@emph{facts}. Hypotheses and verbal descriptions are no substitute for -the detailed raw data. Reporting the facts is straightforward, but many -people strain to posit explanations and report them instead of the -facts. If the explanations are based on guesses about how Emacs is -implemented, they will be useless; meanwhile, lacking the facts, we will -have no real information about the bug. - - For example, suppose that you type @kbd{C-x C-f /glorp/baz.ugh -@key{RET}}, visiting a file which (you know) happens to be rather -large, and Emacs displays @samp{I feel pretty today}. The best way to -report the bug is with a sentence like the preceding one, because it -gives all the facts. - - A bad way would be to assume that the problem is due to the size of -the file and say, ``I visited a large file, and Emacs displayed @samp{I -feel pretty today}.'' This is what we mean by ``guessing -explanations.'' The problem is just as likely to be due to the fact -that there is a @samp{z} in the file name. If this is so, then when we -got your report, we would try out the problem with some ``large file,'' -probably with no @samp{z} in its name, and not see any problem. There -is no way in the world that we could guess that we should try visiting a -file with a @samp{z} in its name. - - Alternatively, the problem might be due to the fact that the file starts -with exactly 25 spaces. For this reason, you should make sure that you -inform us of the exact contents of any file that is needed to reproduce the -bug. What if the problem only occurs when you have typed the @kbd{C-x C-a} -command previously? This is why we ask you to give the exact sequence of -characters you typed since starting the Emacs session. - - You should not even say ``visit a file'' instead of @kbd{C-x C-f} unless -you @emph{know} that it makes no difference which visiting command is used. -Similarly, rather than saying ``if I have three characters on the line,'' -say ``after I type @kbd{@key{RET} A B C @key{RET} C-p},'' if that is -the way you entered the text. - - So please don't guess any explanations when you report a bug. If you -want to actually @emph{debug} the problem, and report explanations that -are more than guesses, that is useful---but please include the facts as -well. - -@node Checklist -@subsection Checklist for Bug Reports - -@cindex reporting bugs - The best way to send a bug report is to mail it electronically to the -Emacs maintainers at @email{bug-gnu-emacs@@gnu.org}, or to -@email{emacs-pretest-bug@@gnu.org} if you are pretesting an Emacs beta -release. (If you want to suggest a change as an improvement, use the -same address.) - - If you'd like to read the bug reports, you can find them on the -newsgroup @samp{gnu.emacs.bug}; keep in mind, however, that as a -spectator you should not criticize anything about what you see there. -The purpose of bug reports is to give information to the Emacs -maintainers. Spectators are welcome only as long as they do not -interfere with this. In particular, some bug reports contain fairly -large amounts of data; spectators should not complain about this. - - Please do not post bug reports using netnews; mail is more reliable -than netnews about reporting your correct address, which we may need -in order to ask you for more information. If your data is more than -500,000 bytes, please don't include it directly in the bug report; -instead, offer to send it on request, or make it available by ftp and -say where. - -@findex report-emacs-bug - A convenient way to send a bug report for Emacs is to use the command -@kbd{M-x report-emacs-bug}. This sets up a mail buffer (@pxref{Sending -Mail}) and automatically inserts @emph{some} of the essential -information. However, it cannot supply all the necessary information; -you should still read and follow the guidelines below, so you can enter -the other crucial information by hand before you send the message. - - To enable maintainers to investigate a bug, your report -should include all these things: - -@itemize @bullet -@item -The version number of Emacs. Without this, we won't know whether there -is any point in looking for the bug in the current version of GNU -Emacs. - -You can get the version number by typing @kbd{M-x emacs-version -@key{RET}}. If that command does not work, you probably have something -other than GNU Emacs, so you will have to report the bug somewhere -else. - -@item -The type of machine you are using, and the operating system name and -version number. @kbd{M-x emacs-version @key{RET}} provides this -information too. Copy its output from the @samp{*Messages*} buffer, so -that you get it all and get it accurately. - -@item -The operands given to the @code{configure} command when Emacs was -installed. - -@item -A complete list of any modifications you have made to the Emacs source. -(We may not have time to investigate the bug unless it happens in an -unmodified Emacs. But if you've made modifications and you don't tell -us, you are sending us on a wild goose chase.) - -Be precise about these changes. A description in English is not -enough---send a context diff for them. - -Adding files of your own, or porting to another machine, is a -modification of the source. - -@item -Details of any other deviations from the standard procedure for installing -GNU Emacs. - -@item -The complete text of any files needed to reproduce the bug. - - If you can tell us a way to cause the problem without visiting any files, -please do so. This makes it much easier to debug. If you do need files, -make sure you arrange for us to see their exact contents. For example, it -can matter whether there are spaces at the ends of lines, or a -newline after the last line in the buffer (nothing ought to care whether -the last line is terminated, but try telling the bugs that). - -@item -The precise commands we need to type to reproduce the bug. - -@findex open-dribble-file -@cindex dribble file -@cindex logging keystrokes -The easy way to record the input to Emacs precisely is to write a -dribble file. To start the file, execute the Lisp expression - -@example -(open-dribble-file "~/dribble") -@end example - -@noindent -using @kbd{M-:} or from the @samp{*scratch*} buffer just after -starting Emacs. From then on, Emacs copies all your input to the -specified dribble file until the Emacs process is killed. - -@item -@findex open-termscript -@cindex termscript file -@cindex @env{TERM} environment variable -For possible display bugs, the terminal type (the value of environment -variable @env{TERM}), the complete termcap entry for the terminal from -@file{/etc/termcap} (since that file is not identical on all machines), -and the output that Emacs actually sent to the terminal. - -The way to collect the terminal output is to execute the Lisp expression - -@example -(open-termscript "~/termscript") -@end example - -@noindent -using @kbd{M-:} or from the @samp{*scratch*} buffer just after -starting Emacs. From then on, Emacs copies all terminal output to the -specified termscript file as well, until the Emacs process is killed. -If the problem happens when Emacs starts up, put this expression into -your @file{.emacs} file so that the termscript file will be open when -Emacs displays the screen for the first time. - -Be warned: it is often difficult, and sometimes impossible, to fix a -terminal-dependent bug without access to a terminal of the type that -stimulates the bug. - -@item -If non-@acronym{ASCII} text or internationalization is relevant, the locale that -was current when you started Emacs. On GNU/Linux and Unix systems, or -if you use a Posix-style shell such as Bash, you can use this shell -command to view the relevant values: - -@smallexample -echo LC_ALL=$LC_ALL LC_COLLATE=$LC_COLLATE LC_CTYPE=$LC_CTYPE \ - LC_MESSAGES=$LC_MESSAGES LC_TIME=$LC_TIME LANG=$LANG -@end smallexample - -Alternatively, use the @command{locale} command, if your system has it, -to display your locale settings. - -You can use the @kbd{M-!} command to execute these commands from -Emacs, and then copy the output from the @samp{*Messages*} buffer into -the bug report. Alternatively, @kbd{M-x getenv @key{RET} LC_ALL -@key{RET}} will display the value of @code{LC_ALL} in the echo area, and -you can copy its output from the @samp{*Messages*} buffer. - -@item -A description of what behavior you observe that you believe is -incorrect. For example, ``The Emacs process gets a fatal signal,'' or, -``The resulting text is as follows, which I think is wrong.'' - -Of course, if the bug is that Emacs gets a fatal signal, then one can't -miss it. But if the bug is incorrect text, the maintainer might fail to -notice what is wrong. Why leave it to chance? - -Even if the problem you experience is a fatal signal, you should still -say so explicitly. Suppose something strange is going on, such as, your -copy of the source is out of sync, or you have encountered a bug in the -C library on your system. (This has happened!) Your copy might crash -and the copy here might not. If you @emph{said} to expect a crash, then -when Emacs here fails to crash, we would know that the bug was not -happening. If you don't say to expect a crash, then we would not know -whether the bug was happening---we would not be able to draw any -conclusion from our observations. - -@item -If the bug is that the Emacs Manual or the Emacs Lisp Reference Manual -fails to describe the actual behavior of Emacs, or that the text is -confusing, copy in the text from the online manual which you think is -at fault. If the section is small, just the section name is enough. - -@item -If the manifestation of the bug is an Emacs error message, it is -important to report the precise text of the error message, and a -backtrace showing how the Lisp program in Emacs arrived at the error. - -To get the error message text accurately, copy it from the -@samp{*Messages*} buffer into the bug report. Copy all of it, not just -part. - -@findex toggle-debug-on-error -@pindex Edebug -To make a backtrace for the error, use @kbd{M-x toggle-debug-on-error} -before the error happens (that is to say, you must give that command -and then make the bug happen). This causes the error to start the Lisp -debugger, which shows you a backtrace. Copy the text of the -debugger's backtrace into the bug report. @xref{Debugger,, The Lisp -Debugger, elisp, the Emacs Lisp Reference Manual}, for information on -debugging Emacs Lisp programs with the Edebug package. - -This use of the debugger is possible only if you know how to make the -bug happen again. If you can't make it happen again, at least copy -the whole error message. - -@item -Check whether any programs you have loaded into the Lisp world, -including your @file{.emacs} file, set any variables that may affect the -functioning of Emacs. Also, see whether the problem happens in a -freshly started Emacs without loading your @file{.emacs} file (start -Emacs with the @code{-q} switch to prevent loading the init file). If -the problem does @emph{not} occur then, you must report the precise -contents of any programs that you must load into the Lisp world in order -to cause the problem to occur. - -@item -If the problem does depend on an init file or other Lisp programs that -are not part of the standard Emacs system, then you should make sure it -is not a bug in those programs by complaining to their maintainers -first. After they verify that they are using Emacs in a way that is -supposed to work, they should report the bug. - -@item -If you wish to mention something in the GNU Emacs source, show the line -of code with a few lines of context. Don't just give a line number. - -The line numbers in the development sources don't match those in your -sources. It would take extra work for the maintainers to determine what -code is in your version at a given line number, and we could not be -certain. - -@item -Additional information from a C debugger such as GDB might enable -someone to find a problem on a machine which he does not have available. -If you don't know how to use GDB, please read the GDB manual---it is not -very long, and using GDB is easy. You can find the GDB distribution, -including the GDB manual in online form, in most of the same places you -can find the Emacs distribution. To run Emacs under GDB, you should -switch to the @file{src} subdirectory in which Emacs was compiled, then -do @samp{gdb emacs}. It is important for the directory @file{src} to be -current so that GDB will read the @file{.gdbinit} file in this -directory. - -However, you need to think when you collect the additional information -if you want it to show what causes the bug. - -@cindex backtrace for bug reports -For example, many people send just a backtrace, but that is not very -useful by itself. A simple backtrace with arguments often conveys -little about what is happening inside GNU Emacs, because most of the -arguments listed in the backtrace are pointers to Lisp objects. The -numeric values of these pointers have no significance whatever; all that -matters is the contents of the objects they point to (and most of the -contents are themselves pointers). - -@findex debug_print -To provide useful information, you need to show the values of Lisp -objects in Lisp notation. Do this for each variable which is a Lisp -object, in several stack frames near the bottom of the stack. Look at -the source to see which variables are Lisp objects, because the debugger -thinks of them as integers. - -To show a variable's value in Lisp syntax, first print its value, then -use the user-defined GDB command @code{pr} to print the Lisp object in -Lisp syntax. (If you must use another debugger, call the function -@code{debug_print} with the object as an argument.) The @code{pr} -command is defined by the file @file{.gdbinit}, and it works only if you -are debugging a running process (not with a core dump). - -To make Lisp errors stop Emacs and return to GDB, put a breakpoint at -@code{Fsignal}. - -For a short listing of Lisp functions running, type the GDB -command @code{xbacktrace}. - -The file @file{.gdbinit} defines several other commands that are useful -for examining the data types and contents of Lisp objects. Their names -begin with @samp{x}. These commands work at a lower level than -@code{pr}, and are less convenient, but they may work even when -@code{pr} does not, such as when debugging a core dump or when Emacs has -had a fatal signal. - -@cindex debugging Emacs, tricks and techniques -More detailed advice and other useful techniques for debugging Emacs -are available in the file @file{etc/DEBUG} in the Emacs distribution. -That file also includes instructions for investigating problems -whereby Emacs stops responding (many people assume that Emacs is -``hung,'' whereas in fact it might be in an infinite loop). - -To find the file @file{etc/DEBUG} in your Emacs installation, use the -directory name stored in the variable @code{data-directory}. -@end itemize - -Here are some things that are not necessary in a bug report: - -@itemize @bullet -@item -A description of the envelope of the bug---this is not necessary for a -reproducible bug. - -Often people who encounter a bug spend a lot of time investigating -which changes to the input file will make the bug go away and which -changes will not affect it. - -This is often time-consuming and not very useful, because the way we -will find the bug is by running a single example under the debugger -with breakpoints, not by pure deduction from a series of examples. -You might as well save time by not searching for additional examples. -It is better to send the bug report right away, go back to editing, -and find another bug to report. - -Of course, if you can find a simpler example to report @emph{instead} of -the original one, that is a convenience. Errors in the output will be -easier to spot, running under the debugger will take less time, etc. - -However, simplification is not vital; if you can't do this or don't have -time to try, please report the bug with your original test case. - -@item -A core dump file. - -Debugging the core dump might be useful, but it can only be done on -your machine, with your Emacs executable. Therefore, sending the core -dump file to the Emacs maintainers won't be useful. Above all, don't -include the core file in an email bug report! Such a large message -can be extremely inconvenient. - -@item -A system-call trace of Emacs execution. - -System-call traces are very useful for certain special kinds of -debugging, but in most cases they give little useful information. It is -therefore strange that many people seem to think that @emph{the} way to -report information about a crash is to send a system-call trace. Perhaps -this is a habit formed from experience debugging programs that don't -have source code or debugging symbols. - -In most programs, a backtrace is normally far, far more informative than -a system-call trace. Even in Emacs, a simple backtrace is generally -more informative, though to give full information you should supplement -the backtrace by displaying variable values and printing them as Lisp -objects with @code{pr} (see above). - -@item -A patch for the bug. - -A patch for the bug is useful if it is a good one. But don't omit the -other information that a bug report needs, such as the test case, on the -assumption that a patch is sufficient. We might see problems with your -patch and decide to fix the problem another way, or we might not -understand it at all. And if we can't understand what bug you are -trying to fix, or why your patch should be an improvement, we mustn't -install it. - -@ifnottex -@xref{Sending Patches}, for guidelines on how to make it easy for us to -understand and install your patches. -@end ifnottex - -@item -A guess about what the bug is or what it depends on. - -Such guesses are usually wrong. Even experts can't guess right about -such things without first using the debugger to find the facts. -@end itemize - -@node Sending Patches -@subsection Sending Patches for GNU Emacs - -@cindex sending patches for GNU Emacs -@cindex patches, sending - If you would like to write bug fixes or improvements for GNU Emacs, -that is very helpful. When you send your changes, please follow these -guidelines to make it easy for the maintainers to use them. If you -don't follow these guidelines, your information might still be useful, -but using it will take extra work. Maintaining GNU Emacs is a lot of -work in the best of circumstances, and we can't keep up unless you do -your best to help. - -@itemize @bullet -@item -Send an explanation with your changes of what problem they fix or what -improvement they bring about. For a bug fix, just include a copy of the -bug report, and explain why the change fixes the bug. - -(Referring to a bug report is not as good as including it, because then -we will have to look it up, and we have probably already deleted it if -we've already fixed the bug.) - -@item -Always include a proper bug report for the problem you think you have -fixed. We need to convince ourselves that the change is right before -installing it. Even if it is correct, we might have trouble -understanding it if we don't have a way to reproduce the problem. - -@item -Include all the comments that are appropriate to help people reading the -source in the future understand why this change was needed. - -@item -Don't mix together changes made for different reasons. -Send them @emph{individually}. - -If you make two changes for separate reasons, then we might not want to -install them both. We might want to install just one. If you send them -all jumbled together in a single set of diffs, we have to do extra work -to disentangle them---to figure out which parts of the change serve -which purpose. If we don't have time for this, we might have to ignore -your changes entirely. - -If you send each change as soon as you have written it, with its own -explanation, then two changes never get tangled up, and we can consider -each one properly without any extra work to disentangle them. - -@item -Send each change as soon as that change is finished. Sometimes people -think they are helping us by accumulating many changes to send them all -together. As explained above, this is absolutely the worst thing you -could do. - -Since you should send each change separately, you might as well send it -right away. That gives us the option of installing it immediately if it -is important. - -@item -Use @samp{diff -c} to make your diffs. Diffs without context are hard -to install reliably. More than that, they are hard to study; we must -always study a patch to decide whether we want to install it. Unidiff -format is better than contextless diffs, but not as easy to read as -@samp{-c} format. - -If you have GNU diff, use @samp{diff -c -F'^[_a-zA-Z0-9$]+ *('} when -making diffs of C code. This shows the name of the function that each -change occurs in. - -@item -Avoid any ambiguity as to which is the old version and which is the new. -Please make the old version the first argument to diff, and the new -version the second argument. And please give one version or the other a -name that indicates whether it is the old version or your new changed -one. - -@item -Write the change log entries for your changes. This is both to save us -the extra work of writing them, and to help explain your changes so we -can understand them. - -The purpose of the change log is to show people where to find what was -changed. So you need to be specific about what functions you changed; -in large functions, it's often helpful to indicate where within the -function the change was. - -On the other hand, once you have shown people where to find the change, -you need not explain its purpose in the change log. Thus, if you add a -new function, all you need to say about it is that it is new. If you -feel that the purpose needs explaining, it probably does---but put the -explanation in comments in the code. It will be more useful there. - -Please read the @file{ChangeLog} files in the @file{src} and -@file{lisp} directories to see what sorts of information to put in, -and to learn the style that we use. @xref{Change Log}. - -@item -When you write the fix, keep in mind that we can't install a change that -would break other systems. Please think about what effect your change -will have if compiled on another type of system. - -Sometimes people send fixes that @emph{might} be an improvement in -general---but it is hard to be sure of this. It's hard to install -such changes because we have to study them very carefully. Of course, -a good explanation of the reasoning by which you concluded the change -was correct can help convince us. - -The safest changes are changes to the configuration files for a -particular machine. These are safe because they can't create new bugs -on other machines. - -Please help us keep up with the workload by designing the patch in a -form that is clearly safe to install. -@end itemize - -@node Contributing, Service, Bugs, Top -@section Contributing to Emacs Development - -If you would like to help pretest Emacs releases to assure they work -well, or if you would like to work on improving Emacs, please contact -the maintainers at @email{emacs-devel@@gnu.org}. A pretester -should be prepared to investigate bugs as well as report them. If you'd -like to work on improving Emacs, please ask for suggested projects or -suggest your own ideas. - -If you have already written an improvement, please tell us about it. If -you have not yet started work, it is useful to contact -@email{emacs-devel@@gnu.org} before you start; it might be -possible to suggest ways to make your extension fit in better with the -rest of Emacs. - -The development version of Emacs can be downloaded from the CVS -repository where it is actively maintained by a group of developers. -See the Emacs project page -@url{http://savannah.gnu.org/projects/emacs/} for details. - -@node Service, Copying, Contributing, Top -@section How To Get Help with GNU Emacs - -If you need help installing, using or changing GNU Emacs, there are two -ways to find it: - -@itemize @bullet -@item -Send a message to the mailing list -@email{help-gnu-emacs@@gnu.org}, or post your request on -newsgroup @code{gnu.emacs.help}. (This mailing list and newsgroup -interconnect, so it does not matter which one you use.) - -@item -Look in the service directory for someone who might help you for a fee. -The service directory is found in the file named @file{etc/SERVICE} in the -Emacs distribution. -@end itemize - -@ifnottex -@lowersections -@end ifnottex - -@ignore - arch-tag: c9cba76d-b2cb-4e0c-ae3f-19d5ef35817c -@end ignore