# HG changeset patch # User Dave Love # Date 1037636681 0 # Node ID 8aeaf7d166dd8e5d054f43b8aad407f0533da7bf # Parent 5403143c2402a75404237392d1035b3e65d14320 Maybe define bcopy, bzero, bcmp. diff -r 5403143c2402 -r 8aeaf7d166dd configure.in --- a/configure.in Mon Nov 18 16:15:15 2002 +0000 +++ b/configure.in Mon Nov 18 16:24:41 2002 +0000 @@ -88,11 +88,11 @@ dnl o | op | ope | open | open- | open-l | open-lo \ dnl | open-loo | open-look ) val=open-look ;; * ) -dnl AC_MSG_ERROR([the \`--with-x-toolkit' option is supposed to have a value -dnl which is \`yes', \`no', \`lucid', \`athena', \`motif' or \`open-look'.]) -AC_MSG_ERROR([\`--with-x-toolkit=$withval' is invalid\; -this option's value should be \`yes', \`no', \`lucid', \`athena', or \`motif'. -Currently, \`yes', \`athena' and \`lucid' are synonyms.]) +dnl AC_MSG_ERROR([the `--with-x-toolkit' option is supposed to have a value +dnl which is `yes', `no', `lucid', `athena', `motif' or `open-look'.]) +AC_MSG_ERROR([`--with-x-toolkit=$withval' is invalid\; +this option's value should be `yes', `no', `lucid', `athena', or `motif'. +Currently, `yes', `athena' and `lucid' are synonyms.]) ;; esac with_x_toolkit=$val @@ -142,23 +142,21 @@ #### Check if the source directory already has a configured system in it. if test `pwd` != `(cd ${srcdir} && pwd)` \ && test -f "${srcdir}/src/config.h" ; then - AC_MSG_WARN([The directory tree \`${srcdir}' is being used + AC_MSG_WARN([[The directory tree `${srcdir}' is being used as a build directory right now; it has been configured in its own right. To configure in another directory as well, you MUST use GNU make. If you do not have GNU make, then you must - now do \`make distclean' in ${srcdir}, - and then run $0 again.]) + now do `make distclean' in ${srcdir}, + and then run $0 again.]]) -changequote(, )dnl - extrasub='/^VPATH[ ]*=/c\ -changequote([, ])dnl +[extrasub='/^VPATH[ ]*=/c\ vpath %.c $(srcdir)\ vpath %.h $(srcdir)\ vpath %.y $(srcdir)\ vpath %.l $(srcdir)\ vpath %.s $(srcdir)\ vpath %.in $(srcdir)\ -vpath %.texi $(srcdir)' +vpath %.texi $(srcdir)'] fi #### Given the configuration name, set machfile and opsysfile to the @@ -170,7 +168,11 @@ canonical=$host configuration=${host_alias-$host} -changequote(, )dnl +dnl This used to use changequote, but, apart from `changequote is evil' +dnl per the autoconf manual, we can speed up autoconf somewhat by quoting +dnl the great gob of text. Thus it's not processed for possible expansion. +dnl Just make sure the brackets remain balanced. +[ ### If you add support for a new configuration, add code to this ### switch statement to recognize your configuration name and select @@ -796,18 +798,6 @@ machine=plexus opsys=usg5-2 ;; - ## PowerPC reference platform - powerpcle-*-solaris2.5* ) - machine=prep - opsys=sol2-5 - ;; - - ## PowerPC reference platform - powerpcle-*-solaris2* ) - machine=prep - opsys=sol2-6 - ;; - ## Pyramid machines ## I don't really have any idea what sort of processor the Pyramid has, ## so I'm assuming it is its own architecture. @@ -1160,11 +1150,11 @@ esac fi -changequote([, ])dnl +] if test $unported = yes; then - AC_MSG_ERROR([Emacs hasn't been ported to \`${canonical}' systems. -Check \`etc/MACHINES' for recognized configuration names.]) + AC_MSG_ERROR([Emacs hasn't been ported to `${canonical}' systems. +Check `etc/MACHINES' for recognized configuration names.]) fi machfile="m/${machine}.h" @@ -1365,16 +1355,14 @@ # The value of CPP is a quoted variable reference, so we need to do this # to get its actual value... CPP=`eval "echo $CPP"` -changequote(, )dnl -eval `${CPP} -Isrc ${tempcname} \ +[eval `${CPP} -Isrc ${tempcname} \ | sed -n -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/p'` if test "x$SPECIFIED_CFLAGS" = x; then eval `${CPP} -Isrc -DTHIS_IS_CONFIGURE ${tempcname} \ | sed -n -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/p'` else REAL_CFLAGS="$CFLAGS" -fi -changequote([, ])dnl +fi] rm ${tempcname} ac_link="$ac_link $ld_switch_machine $ld_switch_system" @@ -1402,12 +1390,13 @@ fi dnl checks for header files -dnl NB. On Solaris 8 there's a warning from the check for term.h because -dnl it needs something else (curses.h?) to define `bool'. AC_CHECK_HEADERS(sys/select.h sys/timeb.h sys/time.h unistd.h utime.h \ linux/version.h sys/systeminfo.h termios.h limits.h string.h stdlib.h \ termcap.h stdio_ext.h fcntl.h term.h strings.h coff.h pty.h sys/mman.h \ - sys/param.h) + sys/param.h sys/vlimit.h sys/resource.h) +dnl On Solaris 8 there's a compilation warning for term.h because +dnl it doesn't define `bool'. +AC_CHECK_HEADERS(term.h, , , -) AC_HEADER_STDC AC_HEADER_TIME AC_DECL_SYS_SIGLIST @@ -1889,8 +1878,10 @@ HAVE_XAW3D=no if test "${HAVE_X11}" = "yes"; then if test "${USE_X_TOOLKIT}" != "none"; then + dnl Fixme: determine what Scrollbar.h needs to avoid compilation + dnl errors from the test without the `-'. AC_CHECK_HEADER(X11/Xaw3d/Scrollbar.h, - AC_CHECK_LIB(Xaw3d, XawScrollbarSetThumb, HAVE_XAW3D=yes)) + [AC_CHECK_LIB(Xaw3d, XawScrollbarSetThumb, HAVE_XAW3D=yes)], , -) if test "${HAVE_XAW3D}" = "yes"; then AC_DEFINE(HAVE_XAW3D, 1, [Define to 1 if you have the Xaw3d library (-lXaw3d).]) @@ -1967,10 +1958,7 @@ AH_TEMPLATE(HAVE_JPEG, [Define to 1 if you have the jpeg library (-ljpeg).])dnl if test "${HAVE_JPEG}" = "yes"; then AC_DEFINE(HAVE_JPEG) - AC_EGREP_CPP( -changequote({, })dnl avoid leadingspace on the next line -{version= *(6[2-9]|[7-9][0-9])}, -changequote([, ])dnl + AC_EGREP_CPP([version= *(6[2-9]|[7-9][0-9])], [#include version=JPEG_LIB_VERSION ], @@ -2081,7 +2069,7 @@ if test $ac_cv_prog_liblockfile = yes; then AC_MSG_ERROR([Shared liblockfile found but can't link against it. This probably means that movemail could lose mail. -There may be a \`development' package to install containing liblockfile.]) +There may be a `development' package to install containing liblockfile.]) else AC_DEFINE(LIBMAIL, -llockfile, [Define to -llockfile if it is usable.]) fi else : @@ -2096,7 +2084,7 @@ utimes setrlimit setpgid getcwd getwd shutdown strftime getaddrinfo \ __fpending mblen mbrlen mbsinit strsignal setitimer ualarm index rindex \ sendto recvfrom getsockopt setsockopt getsockname getpeername \ -gai_strerror mkstemp getline getdelim mremap memmove) +gai_strerror mkstemp getline getdelim mremap memmove fsync) AC_CHECK_HEADERS(sys/un.h) @@ -2281,6 +2269,7 @@ AC_CHECK_HEADER(arpa/inet.h, , ok_so_far=no) fi if test $ok_so_far = yes; then +dnl Fixme: Not used. Should this be HAVE_SOCKETS? AC_DEFINE(HAVE_INET_SOCKETS, 1, [Define to 1 if you have inet sockets.]) fi @@ -2302,17 +2291,47 @@ AC_CHECK_TYPES(size_t) +dnl Restrict could probably be used effectively other than in regex.c. +AC_CACHE_CHECK([for C restrict keyword], emacs_cv_c_restrict, + [AC_TRY_COMPILE([void fred (int *restrict x);], [], + emacs_cv_c_restrict=yes, + [AC_TRY_COMPILE([void fred (int *__restrict x);], [], + emacs_cv_c_restrict=__restrict, + emacs_cv_c_restrict=no)])]) +case "$emacs_cv_c_restrict" in + yes) emacs_restrict=restrict;; + no) emacs_restrict="";; + *) emacs_restrict="$emacs_cv_c_restrict";; +esac +if test "$emacs_restrict" != __restrict; then + AC_DEFINE_UNQUOTED(__restrict, $emacs_restrict, + [Define to compiler's equivalent of C99 restrict keyword. + Don't define if equivalent is `__restrict'.]) +fi + +AC_CACHE_CHECK([for C restricted array declarations], emacs_cv_c_restrict_arr, + [AC_TRY_COMPILE([void fred (int x[__restrict]);], [], + emacs_cv_c_restrict_arr=yes, emacs_cv_c_restrict_arr=no)]) +if test "$emacs_cv_c_restrict_arr" = yes; then + AC_DEFINE(__restrict_arr, __restrict, + [Define to compiler's equivalent of C99 restrict keyword in array + declarations. Define as empty for no equivalent.]) +fi + +dnl Fixme: AC_SYS_POSIX_TERMIOS should probably be used, but it's not clear +dnl how the tty code is related to POSIX and/or other versions of termios. + +dnl Fixme: Use AC_FUNC_MEMCMP since memcmp is used. (Needs libobj replacement.) + # Set up the CFLAGS for real compilation, so we can substitute it. CFLAGS="$REAL_CFLAGS" CPPFLAGS="$REAL_CPPFLAGS" -changequote(, )dnl #### Find out which version of Emacs this is. -version=`grep 'defconst[ ]*emacs-version' ${srcdir}/lisp/version.el \ - | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'` -changequote([, ])dnl +[version=`grep 'defconst[ ]*emacs-version' ${srcdir}/lisp/version.el \ + | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`] if test x"${version}" = x; then - AC_MSG_ERROR(can't find current emacs version in \`${srcdir}/lisp/version.el'.) + AC_MSG_ERROR([can't find current emacs version in `${srcdir}/lisp/version.el'.]) fi ### Specify what sort of things we'll be editing into Makefile and config.h. @@ -2431,7 +2450,7 @@ Boston, MA 02111-1307, USA. */ -/* No code in Emacs #includes config.h twice, but some of the code +/* No code in Emacs #includes config.h twice, but some bits of code intended to work with other packages as well (like gmalloc.c) think they can include it as many times as they like. */ #ifndef EMACS_CONFIG_H @@ -2564,8 +2583,6 @@ extern char *getenv (); #endif -#endif /* EMACS_CONFIG_H */ - /* These default definitions are good for almost all machines. The exceptions override them in m/MACHINE.h. */ @@ -2605,7 +2622,6 @@ # endif /* GCC. */ #endif /* __P */ - /* Don't include "string.h" or in non-C code. */ #ifndef NOT_C_CODE #ifdef HAVE_STRING_H @@ -2617,10 +2633,19 @@ #ifdef HAVE_STDLIB_H #include #endif +#ifndef __GNUC__ +# ifdef HAVE_ALLOCA_H +# include +# else /* AIX files deal with #pragma. */ +# ifndef alloca /* predefined by HP cc +Olibcalls */ +char *alloca (); +# endif +# endif /* HAVE_ALLOCA_H */ +#endif /* __GNUC__ */ #ifndef HAVE_SIZE_T typedef size_t unsigned #endif -#endif +#endif /* NOT_C_CODE */ /* Define HAVE_X_I18N if we have usable i18n support. */ @@ -2646,8 +2671,36 @@ #define NO_RETURN /* nothing */ #endif +/* These won't be used automatically yet. We also need to know, at least, + that the stack is continuous. */ +#ifdef __GNUC__ +# ifndef GC_SETJMP_WORKS + /* GC_SETJMP_WORKS is nearly always appropriate for GCC -- + see NON_SAVING_SETJMP in the target descriptions. */ + /* Exceptions (see NON_SAVING_SETJMP in target description) are ns32k, + SCO5 non-ELF (but Emacs specifies ELF) and SVR3 on x86. + Fixme: Deal with ns32k, SVR3. */ +# define GC_SETJMP_WORKS 1 +# endif +# ifndef GC_LISP_OBJECT_ALIGNMENT +# define GC_LISP_OBJECT_ALIGNMENT (__alignof__ (Lisp_Object)) +# endif +#endif + +#ifndef HAVE_BCOPY +#define bcopy(a,b,s) memcpy (b,a,s) +#endif +#ifndef HAVE_BZERO +#define bzero(a,s) memset (a,0,s) +#endif +#ifndef HAVE_BCMP +#define BCMP memcmp +#endif + +#endif /* EMACS_CONFIG_H */ + /* -Local variables: +Local Variables: mode: c End: */ @@ -2688,12 +2741,10 @@ echo # Remove any trailing slashes in these variables. -changequote(, )dnl -test "${prefix}" != NONE && +[test "${prefix}" != NONE && prefix=`echo "${prefix}" | sed 's,\([^/]\)/*$,\1,'` test "${exec_prefix}" != NONE && - exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'` -changequote([, ])dnl + exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'`] ## Check if the C preprocessor will convert `..' to `. .'. If so, set ## CPP_NEED_TRADITIONAL to `yes' so that the code to generate Makefile @@ -2718,18 +2769,16 @@ # and lib-src/Makefile from ${srcdir}/lib-src/Makefile.c # This must be done after src/config.h is built, since we rely on that file. -changequote(, )dnl The horror, the horror. # Now get this: Some word that is part of the ${srcdir} directory name # or the ${configuration} value might, just might, happen to be an # identifier like `sun4' or `i386' or something, and be predefined by # the C preprocessor to some helpful value like 1, or maybe the empty # string. Needless to say consequent macro substitutions are less # than conducive to the makefile finding the correct directory. -undefs="`echo $top_srcdir $configuration $canonical | +[undefs="`echo $top_srcdir $configuration $canonical | sed -e 's/[^a-zA-Z0-9_]/ /g' -e 's/^/ /' -e 's/ *$//' \ -e 's/ */ -U/g' -e 's/-U[0-9][^ ]*//g' \ -`" -changequote([, ])dnl +`"] echo creating src/epaths.h ${MAKE-make} epaths-force