# HG changeset patch # User Glenn Morris # Date 1189053594 0 # Node ID 8dc48eac4a6f6baed727b6c2de15a2e7ab05c031 # Parent 0f60e9aea2978085610c6d2c7a9301def488c626 Move to ../doc/emacs/, misc/ diff -r 0f60e9aea297 -r 8dc48eac4a6f man/rmail.texi --- a/man/rmail.texi Thu Sep 06 04:39:49 2007 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1430 +0,0 @@ -@c This is part of the Emacs manual. -@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2001, 2002, -@c 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. -@c See file emacs.texi for copying conditions. -@node Rmail, Dired, Sending Mail, Top -@chapter Reading Mail with Rmail -@cindex Rmail -@cindex reading mail -@findex rmail -@findex rmail-mode -@vindex rmail-mode-hook - - Rmail is an Emacs subsystem for reading and disposing of mail that -you receive. Rmail stores mail messages in files called Rmail files -which use a special format. Reading the message in an Rmail file is -done in a special major mode, Rmail mode, which redefines most letters -to run commands for managing mail. -@menu -* Basic: Rmail Basics. Basic concepts of Rmail, and simple use. -* Scroll: Rmail Scrolling. Scrolling through a message. -* Motion: Rmail Motion. Moving to another message. -* Deletion: Rmail Deletion. Deleting and expunging messages. -* Inbox: Rmail Inbox. How mail gets into the Rmail file. -* Files: Rmail Files. Using multiple Rmail files. -* Output: Rmail Output. Copying message out to files. -* Labels: Rmail Labels. Classifying messages by labeling them. -* Attrs: Rmail Attributes. Certain standard labels, called attributes. -* Reply: Rmail Reply. Sending replies to messages you are viewing. -* Summary: Rmail Summary. Summaries show brief info on many messages. -* Sort: Rmail Sorting. Sorting messages in Rmail. -* Display: Rmail Display. How Rmail displays a message; customization. -* Coding: Rmail Coding. How Rmail handles decoding character sets. -* Editing: Rmail Editing. Editing message text and headers in Rmail. -* Digest: Rmail Digest. Extracting the messages from a digest message. -* Out of Rmail:: Converting an Rmail file to mailbox format. -* Rot13: Rmail Rot13. Reading messages encoded in the rot13 code. -* Movemail:: More details of fetching new mail. -* Remote Mailboxes:: Retrieving Mail from Remote Mailboxes. -* Other Mailbox Formats:: Retrieving Mail from Local Mailboxes in - Various Formats -@end menu - -@node Rmail Basics -@section Basic Concepts of Rmail - -@cindex primary Rmail file -@vindex rmail-file-name - Using Rmail in the simplest fashion, you have one Rmail file -@file{~/RMAIL} in which all of your mail is saved. It is called your -@dfn{primary Rmail file}. The command @kbd{M-x rmail} reads your primary -Rmail file, merges new mail in from your inboxes, displays the first -message you haven't read yet, and lets you begin reading. The variable -@code{rmail-file-name} specifies the name of the primary Rmail file. - - Rmail uses narrowing to hide all but one message in the Rmail file. -The message that is shown is called the @dfn{current message}. Rmail -mode's special commands can do such things as delete the current -message, copy it into another file, send a reply, or move to another -message. You can also create multiple Rmail files and use Rmail to move -messages between them. - -@cindex message number - Within the Rmail file, messages are normally arranged sequentially in -order of receipt; you can specify other ways to sort them. Messages are -identified by consecutive integers which are their @dfn{message numbers}. -The number of the current message is displayed in Rmail's mode line, -followed by the total number of messages in the file. You can move to -a message by specifying its message number with the @kbd{j} key -(@pxref{Rmail Motion}). - -@kindex s @r{(Rmail)} -@findex rmail-expunge-and-save - Following the usual conventions of Emacs, changes in an Rmail file -become permanent only when you save the file. You can save it with -@kbd{s} (@code{rmail-expunge-and-save}), which also expunges deleted -messages from the file first (@pxref{Rmail Deletion}). To save the -file without expunging, use @kbd{C-x C-s}. Rmail also saves the Rmail -file after merging new mail from an inbox file (@pxref{Rmail Inbox}). - -@kindex q @r{(Rmail)} -@findex rmail-quit -@kindex b @r{(Rmail)} -@findex rmail-bury - You can exit Rmail with @kbd{q} (@code{rmail-quit}); this expunges -and saves the Rmail file, then buries the Rmail buffer as well as its -summary buffer, if present (@pxref{Rmail Summary}). But there is no -need to ``exit'' formally. If you switch from Rmail to editing in -other buffers, and never switch back, you have exited. Just make sure -to save the Rmail file eventually (like any other file you have -changed). @kbd{C-x s} is a suitable way to do this (@pxref{Save -Commands}). The Rmail command @kbd{b}, @code{rmail-bury}, buries the -Rmail buffer and its summary buffer without expunging and saving the -Rmail file. - -@node Rmail Scrolling -@section Scrolling Within a Message - - When Rmail displays a message that does not fit on the screen, you -must scroll through it to read the rest. You could do this with -@kbd{C-v}, @kbd{M-v} and @kbd{M-<}, but in Rmail scrolling is so -frequent that it deserves to be easier. - -@table @kbd -@item @key{SPC} -Scroll forward (@code{scroll-up}). -@item @key{DEL} -Scroll backward (@code{scroll-down}). -@item . -Scroll to start of message (@code{rmail-beginning-of-message}). -@item / -Scroll to end of message (@code{rmail-end-of-message}). -@end table - -@kindex SPC @r{(Rmail)} -@kindex DEL @r{(Rmail)} - Since the most common thing to do while reading a message is to scroll -through it by screenfuls, Rmail makes @key{SPC} and @key{DEL} synonyms of -@kbd{C-v} (@code{scroll-up}) and @kbd{M-v} (@code{scroll-down}) - -@kindex . @r{(Rmail)} -@kindex / @r{(Rmail)} -@findex rmail-beginning-of-message -@findex rmail-end-of-message - The command @kbd{.} (@code{rmail-beginning-of-message}) scrolls back to the -beginning of the selected message. This is not quite the same as @kbd{M-<}: -for one thing, it does not set the mark; for another, it resets the buffer -boundaries to the current message if you have changed them. Similarly, -the command @kbd{/} (@code{rmail-end-of-message}) scrolls forward to the end -of the selected message. - -@node Rmail Motion -@section Moving Among Messages - - The most basic thing to do with a message is to read it. The way to -do this in Rmail is to make the message current. The usual practice is -to move sequentially through the file, since this is the order of -receipt of messages. When you enter Rmail, you are positioned at the -first message that you have not yet made current (that is, the first one -that has the @samp{unseen} attribute; @pxref{Rmail Attributes}). Move -forward to see the other new messages; move backward to re-examine old -messages. - -@table @kbd -@item n -Move to the next nondeleted message, skipping any intervening deleted -messages (@code{rmail-next-undeleted-message}). -@item p -Move to the previous nondeleted message -(@code{rmail-previous-undeleted-message}). -@item M-n -Move to the next message, including deleted messages -(@code{rmail-next-message}). -@item M-p -Move to the previous message, including deleted messages -(@code{rmail-previous-message}). -@item j -Move to the first message. With argument @var{n}, move to -message number @var{n} (@code{rmail-show-message}). -@item > -Move to the last message (@code{rmail-last-message}). -@item < -Move to the first message (@code{rmail-first-message}). - -@item M-s @var{regexp} @key{RET} -Move to the next message containing a match for @var{regexp} -(@code{rmail-search}). - -@item - M-s @var{regexp} @key{RET} -Move to the previous message containing a match for @var{regexp}. -@end table - -@kindex n @r{(Rmail)} -@kindex p @r{(Rmail)} -@kindex M-n @r{(Rmail)} -@kindex M-p @r{(Rmail)} -@findex rmail-next-undeleted-message -@findex rmail-previous-undeleted-message -@findex rmail-next-message -@findex rmail-previous-message - @kbd{n} and @kbd{p} are the usual way of moving among messages in -Rmail. They move through the messages sequentially, but skip over -deleted messages, which is usually what you want to do. Their command -definitions are named @code{rmail-next-undeleted-message} and -@code{rmail-previous-undeleted-message}. If you do not want to skip -deleted messages---for example, if you want to move to a message to -undelete it---use the variants @kbd{M-n} and @kbd{M-p} -(@code{rmail-next-message} and @code{rmail-previous-message}). A -numeric argument to any of these commands serves as a repeat -count. - - In Rmail, you can specify a numeric argument by typing just the -digits. You don't need to type @kbd{C-u} first. - -@kindex M-s @r{(Rmail)} -@findex rmail-search -@cindex searching in Rmail - The @kbd{M-s} (@code{rmail-search}) command is Rmail's version of -search. The usual incremental search command @kbd{C-s} works in Rmail, -but it searches only within the current message. The purpose of -@kbd{M-s} is to search for another message. It reads a regular -expression (@pxref{Regexps}) nonincrementally, then searches starting at -the beginning of the following message for a match. It then selects -that message. If @var{regexp} is empty, @kbd{M-s} reuses the regexp -used the previous time. - - To search backward in the file for another message, give @kbd{M-s} a -negative argument. In Rmail you can do this with @kbd{- M-s}. - - It is also possible to search for a message based on labels. -@xref{Rmail Labels}. - -@kindex j @r{(Rmail)} -@kindex > @r{(Rmail)} -@kindex < @r{(Rmail)} -@findex rmail-show-message -@findex rmail-last-message -@findex rmail-first-message - To move to a message specified by absolute message number, use @kbd{j} -(@code{rmail-show-message}) with the message number as argument. With -no argument, @kbd{j} selects the first message. @kbd{<} -(@code{rmail-first-message}) also selects the first message. @kbd{>} -(@code{rmail-last-message}) selects the last message. - -@node Rmail Deletion -@section Deleting Messages - -@cindex deletion (Rmail) - When you no longer need to keep a message, you can @dfn{delete} it. This -flags it as ignorable, and some Rmail commands pretend it is no longer -present; but it still has its place in the Rmail file, and still has its -message number. - -@cindex expunging (Rmail) - @dfn{Expunging} the Rmail file actually removes the deleted messages. -The remaining messages are renumbered consecutively. Expunging is the only -action that changes the message number of any message, except for -undigestifying (@pxref{Rmail Digest}). - -@table @kbd -@item d -Delete the current message, and move to the next nondeleted message -(@code{rmail-delete-forward}). -@item C-d -Delete the current message, and move to the previous nondeleted -message (@code{rmail-delete-backward}). -@item u -Undelete the current message, or move back to a deleted message and -undelete it (@code{rmail-undelete-previous-message}). -@item x -Expunge the Rmail file (@code{rmail-expunge}). -@end table - -@kindex d @r{(Rmail)} -@kindex C-d @r{(Rmail)} -@findex rmail-delete-forward -@findex rmail-delete-backward - There are two Rmail commands for deleting messages. Both delete the -current message and select another message. @kbd{d} -(@code{rmail-delete-forward}) moves to the following message, skipping -messages already deleted, while @kbd{C-d} (@code{rmail-delete-backward}) -moves to the previous nondeleted message. If there is no nondeleted -message to move to in the specified direction, the message that was just -deleted remains current. @kbd{d} with a numeric argument is -equivalent to @kbd{C-d}. - -@vindex rmail-delete-message-hook - Whenever Rmail deletes a message, it runs the hook -@code{rmail-delete-message-hook}. When the hook functions are invoked, -the message has been marked deleted, but it is still the current message -in the Rmail buffer. - -@cindex undeletion (Rmail) -@kindex x @r{(Rmail)} -@findex rmail-expunge -@kindex u @r{(Rmail)} -@findex rmail-undelete-previous-message - To make all the deleted messages finally vanish from the Rmail file, -type @kbd{x} (@code{rmail-expunge}). Until you do this, you can still -@dfn{undelete} the deleted messages. The undeletion command, @kbd{u} -(@code{rmail-undelete-previous-message}), is designed to cancel the -effect of a @kbd{d} command in most cases. It undeletes the current -message if the current message is deleted. Otherwise it moves backward -to previous messages until a deleted message is found, and undeletes -that message. - - You can usually undo a @kbd{d} with a @kbd{u} because the @kbd{u} -moves back to and undeletes the message that the @kbd{d} deleted. But -this does not work when the @kbd{d} skips a few already-deleted messages -that follow the message being deleted; then the @kbd{u} command -undeletes the last of the messages that were skipped. There is no clean -way to avoid this problem. However, by repeating the @kbd{u} command, -you can eventually get back to the message that you intend to -undelete. You can also select a particular deleted message with -the @kbd{M-p} command, then type @kbd{u} to undelete it. - - A deleted message has the @samp{deleted} attribute, and as a result -@samp{deleted} appears in the mode line when the current message is -deleted. In fact, deleting or undeleting a message is nothing more than -adding or removing this attribute. @xref{Rmail Attributes}. - -@node Rmail Inbox -@section Rmail Files and Inboxes -@cindex inbox file - - When you receive mail locally, the operating system places incoming -mail for you in a file that we call your @dfn{inbox}. When you start -up Rmail, it runs a C program called @code{movemail} to copy the new -messages from your local inbox into your primary Rmail file, which -also contains other messages saved from previous Rmail sessions. It -is in this file that you actually read the mail with Rmail. This -operation is called @dfn{getting new mail}. You can get new mail at -any time in Rmail by typing @kbd{g}. - -@vindex rmail-primary-inbox-list -@cindex @env{MAIL} environment variable - The variable @code{rmail-primary-inbox-list} contains a list of the -files which are inboxes for your primary Rmail file. If you don't set -this variable explicitly, it is initialized from the @env{MAIL} -environment variable, or, as a last resort, set to @code{nil}, which -means to use the default inbox. The default inbox file depends on -your operating system; often it is @file{/var/mail/@var{username}}, -@file{/usr/spool/mail/@var{username}}, or -@file{/usr/mail/@var{username}}. - - You can specify the inbox file(s) for any Rmail file with the -command @code{set-rmail-inbox-list}; see @ref{Rmail Files}. - - There are two reasons for having separate Rmail files and inboxes. - -@enumerate -@item -The inbox file format varies between operating systems and according to -the other mail software in use. Only one part of Rmail needs to know -about the alternatives, and it need only understand how to convert all -of them to Rmail's own format. - -@item -It is very cumbersome to access an inbox file without danger of losing -mail, because it is necessary to interlock with mail delivery. -Moreover, different operating systems use different interlocking -techniques. The strategy of moving mail out of the inbox once and for -all into a separate Rmail file avoids the need for interlocking in all -the rest of Rmail, since only Rmail operates on the Rmail file. -@end enumerate - - Rmail was written to use Babyl format as its internal format. Since -then, we have recognized that the usual inbox format on Unix and GNU -systems is adequate for the job, and we plan to change Rmail to use that -as its internal format. However, the Rmail file will still be separate -from the inbox file, even when their format is the same. - -@vindex rmail-preserve-inbox - When getting new mail, Rmail first copies the new mail from the -inbox file to the Rmail file; then it saves the Rmail file; then it -clears out the inbox file. This way, a system crash may cause -duplication of mail between the inbox and the Rmail file, but cannot -lose mail. If @code{rmail-preserve-inbox} is non-@code{nil}, then -Rmail does not clear out the inbox file when it gets new mail. You -may wish to set this, for example, on a portable computer you use to -check your mail via POP while traveling, so that your mail will remain -on the server and you can save it later on your workstation. - - In some cases, Rmail copies the new mail from the inbox file -indirectly. First it runs the @code{movemail} program to move the mail -from the inbox to an intermediate file called -@file{~/.newmail-@var{inboxname}}. Then Rmail merges the new mail from -that file, saves the Rmail file, and only then deletes the intermediate -file. If there is a crash at the wrong time, this file continues to -exist, and Rmail will use it again the next time it gets new mail from -that inbox. - - If Rmail is unable to convert the data in -@file{~/.newmail-@var{inboxname}} into Babyl format, it renames the file -to @file{~/RMAILOSE.@var{n}} (@var{n} is an integer chosen to make the -name unique) so that Rmail will not have trouble with the data again. -You should look at the file, find whatever message confuses Rmail -(probably one that includes the control-underscore character, octal code -037), and delete it. Then you can use @kbd{1 g} to get new mail from -the corrected file. - -@node Rmail Files -@section Multiple Rmail Files - - Rmail operates by default on your @dfn{primary Rmail file}, which is named -@file{~/RMAIL} and receives your incoming mail from your system inbox file. -But you can also have other Rmail files and edit them with Rmail. These -files can receive mail through their own inboxes, or you can move messages -into them with explicit Rmail commands (@pxref{Rmail Output}). - -@table @kbd -@item i @var{file} @key{RET} -Read @var{file} into Emacs and run Rmail on it (@code{rmail-input}). - -@item M-x set-rmail-inbox-list @key{RET} @var{files} @key{RET} -Specify inbox file names for current Rmail file to get mail from. - -@item g -Merge new mail from current Rmail file's inboxes -(@code{rmail-get-new-mail}). - -@item C-u g @var{file} @key{RET} -Merge new mail from inbox file @var{file}. -@end table - -@kindex i @r{(Rmail)} -@findex rmail-input - To run Rmail on a file other than your primary Rmail file, you can use -the @kbd{i} (@code{rmail-input}) command in Rmail. This visits the file -in Rmail mode. You can use @kbd{M-x rmail-input} even when not in -Rmail, but it is easier to type @kbd{C-u M-x rmail}, which does the -same thing. - - The file you read with @kbd{i} should normally be a valid Rmail file. -If it is not, Rmail tries to decompose it into a stream of messages in -various known formats. If it succeeds, it converts the whole file to an -Rmail file. If you specify a file name that doesn't exist, @kbd{i} -initializes a new buffer for creating a new Rmail file. - -@vindex rmail-secondary-file-directory -@vindex rmail-secondary-file-regexp - You can also select an Rmail file from a menu. In the Classify menu, -choose the Input Rmail File item; then choose the Rmail file you want. -The variables @code{rmail-secondary-file-directory} and -@code{rmail-secondary-file-regexp} specify which files to offer in the -menu: the first variable says which directory to find them in; the -second says which files in that directory to offer (all those that -match the regular expression). These variables also apply to choosing -a file for output (@pxref{Rmail Output}). - -@findex set-rmail-inbox-list - Each Rmail file can contain a list of inbox file names; you can specify -this list with @kbd{M-x set-rmail-inbox-list @key{RET} @var{files} -@key{RET}}. The argument can contain any number of file names, separated -by commas. It can also be empty, which specifies that this file should -have no inboxes. Once you specify a list of inboxes in an Rmail file, -the Rmail file remembers it permanently until you specify a different list. - - As a special exception, if your primary Rmail file does not specify any -inbox files, it uses your standard system inbox. - -@kindex g @r{(Rmail)} -@findex rmail-get-new-mail - The @kbd{g} command (@code{rmail-get-new-mail}) merges mail into the -current Rmail file from its inboxes. If the Rmail file has no -inboxes, @kbd{g} does nothing. The command @kbd{M-x rmail} also -merges new mail into your primary Rmail file. - - To merge mail from a file that is not the usual inbox, give the -@kbd{g} key a numeric argument, as in @kbd{C-u g}. Then it reads a file -name and merges mail from that file. The inbox file is not deleted or -changed in any way when @kbd{g} with an argument is used. This is, -therefore, a general way of merging one file of messages into another. - -@node Rmail Output -@section Copying Messages Out to Files - - These commands copy messages from an Rmail file into another file. - -@table @kbd -@item o @var{file} @key{RET} -Append a copy of the current message to the file @var{file}, using Rmail -file format by default (@code{rmail-output-to-rmail-file}). - -@item C-o @var{file} @key{RET} -Append a copy of the current message to the file @var{file}, using -system inbox file format by default (@code{rmail-output}). - -@item w @var{file} @key{RET} -Output just the message body to the file @var{file}, taking the default -file name from the message @samp{Subject} header. -@end table - -@kindex o @r{(Rmail)} -@findex rmail-output-to-rmail-file -@kindex C-o @r{(Rmail)} -@findex rmail-output - The commands @kbd{o} and @kbd{C-o} copy the current message into a -specified file. This file may be an Rmail file or it may be in system -inbox format; the output commands ascertain the file's format and write -the copied message in that format. - - The @kbd{o} and @kbd{C-o} commands differ in two ways: each has its -own separate default file name, and each specifies a choice of format to -use when the file does not already exist. The @kbd{o} command uses -Rmail format when it creates a new file, while @kbd{C-o} uses system -inbox format for a new file. The default file name for @kbd{o} is the -file name used last with @kbd{o}, and the default file name for -@kbd{C-o} is the file name used last with @kbd{C-o}. - - If the output file is an Rmail file currently visited in an Emacs buffer, -the output commands copy the message into that buffer. It is up to you -to save the buffer eventually in its file. - -@kindex w @r{(Rmail)} -@findex rmail-output-body-to-file - Sometimes you may receive a message whose body holds the contents of a -file. You can save the body to a file (excluding the message header) -with the @kbd{w} command (@code{rmail-output-body-to-file}). Often -these messages contain the intended file name in the @samp{Subject} -field, so the @kbd{w} command uses the @samp{Subject} field as the -default for the output file name. However, the file name is read using -the minibuffer, so you can specify a different name if you wish. - - You can also output a message to an Rmail file chosen with a menu. -In the Classify menu, choose the Output Rmail File menu item; then -choose the Rmail file you want. This outputs the current message to -that file, like the @kbd{o} command. The variables -@code{rmail-secondary-file-directory} and -@code{rmail-secondary-file-regexp} specify which files to offer in the -menu: the first variable says which directory to find them in; the -second says which files in that directory to offer (all those that -match the regular expression). - -@vindex rmail-delete-after-output - Copying a message with @kbd{o} or @kbd{C-o} gives the original copy -of the message the @samp{filed} attribute, so that @samp{filed} -appears in the mode line when such a message is current. @kbd{w} -gives it the @samp{stored} attribute. If you like to keep just a -single copy of every mail message, set the variable -@code{rmail-delete-after-output} to @code{t}; then the @kbd{o}, -@kbd{C-o} and @kbd{w} commands delete the original message after -copying it. (You can undelete the original afterward if you wish.) - - Copying messages into files in system inbox format uses the header -fields that are displayed in Rmail at the time. Thus, if you use the -@kbd{t} command to view the entire header and then copy the message, the -entire header is copied. @xref{Rmail Display}. - -@vindex rmail-output-file-alist - The variable @code{rmail-output-file-alist} lets you specify -intelligent defaults for the output file, based on the contents of the -current message. The value should be a list whose elements have this -form: - -@example -(@var{regexp} . @var{name-exp}) -@end example - -@noindent -If there's a match for @var{regexp} in the current message, then the -default file name for output is @var{name-exp}. If multiple elements -match the message, the first matching element decides the default file -name. The subexpression @var{name-exp} may be a string constant giving -the file name to use, or more generally it may be any Lisp expression -that returns a file name as a string. @code{rmail-output-file-alist} -applies to both @kbd{o} and @kbd{C-o}. - -@node Rmail Labels -@section Labels -@cindex label (Rmail) -@cindex attribute (Rmail) - - Each message can have various @dfn{labels} assigned to it as a means -of classification. Each label has a name; different names are different -labels. Any given label is either present or absent on a particular -message. A few label names have standard meanings and are given to -messages automatically by Rmail when appropriate; these special labels -are called @dfn{attributes}. -@ifnottex -(@xref{Rmail Attributes}.) -@end ifnottex -All other labels are assigned only by users. - -@table @kbd -@item a @var{label} @key{RET} -Assign the label @var{label} to the current message (@code{rmail-add-label}). -@item k @var{label} @key{RET} -Remove the label @var{label} from the current message (@code{rmail-kill-label}). -@item C-M-n @var{labels} @key{RET} -Move to the next message that has one of the labels @var{labels} -(@code{rmail-next-labeled-message}). -@item C-M-p @var{labels} @key{RET} -Move to the previous message that has one of the labels @var{labels} -(@code{rmail-previous-labeled-message}). -@item l @var{labels} @key{RET} -@itemx C-M-l @var{labels} @key{RET} -Make a summary of all messages containing any of the labels @var{labels} -(@code{rmail-summary-by-labels}). -@end table - -@kindex a @r{(Rmail)} -@kindex k @r{(Rmail)} -@findex rmail-add-label -@findex rmail-kill-label - The @kbd{a} (@code{rmail-add-label}) and @kbd{k} -(@code{rmail-kill-label}) commands allow you to assign or remove any -label on the current message. If the @var{label} argument is empty, it -means to assign or remove the same label most recently assigned or -removed. - - Once you have given messages labels to classify them as you wish, there -are two ways to use the labels: in moving and in summaries. - -@kindex C-M-n @r{(Rmail)} -@kindex C-M-p @r{(Rmail)} -@findex rmail-next-labeled-message -@findex rmail-previous-labeled-message - The command @kbd{C-M-n @var{labels} @key{RET}} -(@code{rmail-next-labeled-message}) moves to the next message that has -one of the labels @var{labels}. The argument @var{labels} specifies one -or more label names, separated by commas. @kbd{C-M-p} -(@code{rmail-previous-labeled-message}) is similar, but moves backwards -to previous messages. A numeric argument to either command serves as a -repeat count. - - The command @kbd{C-M-l @var{labels} @key{RET}} -(@code{rmail-summary-by-labels}) displays a summary containing only the -messages that have at least one of a specified set of labels. The -argument @var{labels} is one or more label names, separated by commas. -@xref{Rmail Summary}, for information on summaries. - - If the @var{labels} argument to @kbd{C-M-n}, @kbd{C-M-p} or -@kbd{C-M-l} is empty, it means to use the last set of labels specified -for any of these commands. - -@node Rmail Attributes -@section Rmail Attributes - - Some labels such as @samp{deleted} and @samp{filed} have built-in -meanings, and Rmail assigns them to messages automatically at -appropriate times; these labels are called @dfn{attributes}. Here is -a list of Rmail attributes: - -@table @samp -@item unseen -Means the message has never been current. Assigned to messages when -they come from an inbox file, and removed when a message is made -current. When you start Rmail, it initially shows the first message -that has this attribute. -@item deleted -Means the message is deleted. Assigned by deletion commands and -removed by undeletion commands (@pxref{Rmail Deletion}). -@item filed -Means the message has been copied to some other file. Assigned by the -@kbd{o} and @kbd{C-o} file output commands (@pxref{Rmail Output}). -@item stored -Assigned by the @kbd{w} file output command (@pxref{Rmail Output}). -@item answered -Means you have mailed an answer to the message. Assigned by the @kbd{r} -command (@code{rmail-reply}). @xref{Rmail Reply}. -@item forwarded -Means you have forwarded the message. Assigned by the @kbd{f} command -(@code{rmail-forward}). @xref{Rmail Reply}. -@item edited -Means you have edited the text of the message within Rmail. -@xref{Rmail Editing}. -@item resent -Means you have resent the message. Assigned by the command @kbd{M-x -rmail-resend}. @xref{Rmail Reply}. -@end table - - All other labels are assigned or removed only by users, and have no -standard meaning. - -@node Rmail Reply -@section Sending Replies - - Rmail has several commands that use Mail mode to send outgoing mail. -@xref{Sending Mail}, for information on using Mail mode, including -certain features meant to work with Rmail. What this section documents -are the special commands of Rmail for entering Mail mode. Note that the -usual keys for sending mail---@kbd{C-x m}, @kbd{C-x 4 m}, and @kbd{C-x 5 -m}---also work normally in Rmail mode. - -@table @kbd -@item m -Send a message (@code{rmail-mail}). -@item c -Continue editing the already started outgoing message (@code{rmail-continue}). -@item r -Send a reply to the current Rmail message (@code{rmail-reply}). -@item f -Forward the current message to other users (@code{rmail-forward}). -@item C-u f -Resend the current message to other users (@code{rmail-resend}). -@item M-m -Try sending a bounced message a second time (@code{rmail-retry-failure}). -@end table - -@kindex r @r{(Rmail)} -@findex rmail-reply -@cindex reply to a message - The most common reason to send a message while in Rmail is to reply -to the message you are reading. To do this, type @kbd{r} -(@code{rmail-reply}). This displays the @samp{*mail*} buffer in -another window, much like @kbd{C-x 4 m}, but preinitializes the -@samp{Subject}, @samp{To}, @samp{CC}, @samp{In-reply-to} and -@samp{References} header fields based on the message you are replying -to. The @samp{To} field starts out as the address of the person who -sent the message you received, and the @samp{CC} field starts out with -all the other recipients of that message. - -@vindex rmail-dont-reply-to-names - You can exclude certain recipients from being placed automatically in -the @samp{CC}, using the variable @code{rmail-dont-reply-to-names}. Its -value should be a regular expression (as a string); any recipient that -the regular expression matches, is excluded from the @samp{CC} field. -The default value matches your own name, and any name starting with -@samp{info-}. (Those names are excluded because there is a convention -of using them for large mailing lists to broadcast announcements.) - - To omit the @samp{CC} field completely for a particular reply, enter -the reply command with a numeric argument: @kbd{C-u r} or @kbd{1 r}. -This means to reply only to the sender of the original message. - - Once the @samp{*mail*} buffer has been initialized, editing and -sending the mail goes as usual (@pxref{Sending Mail}). You can edit the -presupplied header fields if they are not what you want. You can also -use the commands of Mail mode (@pxref{Mail Mode}), including @kbd{C-c -C-y} which yanks in the message that you are replying to. You can -also switch to the Rmail buffer, select a different message there, switch -back, and yank the new current message. - -@kindex M-m @r{(Rmail)} -@findex rmail-retry-failure -@cindex retrying a failed message -@vindex rmail-retry-ignored-headers - Sometimes a message does not reach its destination. Mailers usually -send the failed message back to you, enclosed in a @dfn{failure -message}. The Rmail command @kbd{M-m} (@code{rmail-retry-failure}) -prepares to send the same message a second time: it sets up a -@samp{*mail*} buffer with the same text and header fields as before. If -you type @kbd{C-c C-c} right away, you send the message again exactly -the same as the first time. Alternatively, you can edit the text or -headers and then send it. The variable -@code{rmail-retry-ignored-headers}, in the same format as -@code{rmail-ignored-headers} (@pxref{Rmail Display}), controls which -headers are stripped from the failed message when retrying it. - -@kindex f @r{(Rmail)} -@findex rmail-forward -@cindex forwarding a message - Another frequent reason to send mail in Rmail is to @dfn{forward} the -current message to other users. @kbd{f} (@code{rmail-forward}) makes -this easy by preinitializing the @samp{*mail*} buffer with the current -message as the text, and a subject designating a forwarded message. All -you have to do is fill in the recipients and send. When you forward a -message, recipients get a message which is ``from'' you, and which has -the original message in its contents. - -@findex unforward-rmail-message - Forwarding a message encloses it between two delimiter lines. It also -modifies every line that starts with a dash, by inserting @w{@samp{- }} -at the start of the line. When you receive a forwarded message, if it -contains something besides ordinary text---for example, program source -code---you might find it useful to undo that transformation. You can do -this by selecting the forwarded message and typing @kbd{M-x -unforward-rmail-message}. This command extracts the original forwarded -message, deleting the inserted @w{@samp{- }} strings, and inserts it -into the Rmail file as a separate message immediately following the -current one. - -@findex rmail-resend - @dfn{Resending} is an alternative similar to forwarding; the -difference is that resending sends a message that is ``from'' the -original sender, just as it reached you---with a few added header fields -@samp{Resent-From} and @samp{Resent-To} to indicate that it came via -you. To resend a message in Rmail, use @kbd{C-u f}. (@kbd{f} runs -@code{rmail-forward}, which is programmed to invoke @code{rmail-resend} -if you provide a numeric argument.) - -@kindex m @r{(Rmail)} -@findex rmail-mail - The @kbd{m} (@code{rmail-mail}) command is used to start editing an -outgoing message that is not a reply. It leaves the header fields empty. -Its only difference from @kbd{C-x 4 m} is that it makes the Rmail buffer -accessible for @kbd{C-c C-y}, just as @kbd{r} does. Thus, @kbd{m} can be -used to reply to or forward a message; it can do anything @kbd{r} or @kbd{f} -can do. - -@kindex c @r{(Rmail)} -@findex rmail-continue - The @kbd{c} (@code{rmail-continue}) command resumes editing the -@samp{*mail*} buffer, to finish editing an outgoing message you were -already composing, or to alter a message you have sent. - -@vindex rmail-mail-new-frame - If you set the variable @code{rmail-mail-new-frame} to a -non-@code{nil} value, then all the Rmail commands to start sending a -message create a new frame to edit it in. This frame is deleted when -you send the message, or when you use the @samp{Cancel} item in the -@samp{Mail} menu. - - All the Rmail commands to send a message use the mail-composition -method that you have chosen (@pxref{Mail Methods}). - -@node Rmail Summary -@section Summaries -@cindex summary (Rmail) - - A @dfn{summary} is a buffer containing one line per message to give -you an overview of the mail in an Rmail file. Each line shows the -message number and date, the sender, the line count, the labels, and -the subject. Moving point in the summary buffer selects messages as -you move to their summary lines. Almost all Rmail commands are valid -in the summary buffer also; when used there, they apply to the message -described by the current line of the summary. - - A summary buffer applies to a single Rmail file only; if you are -editing multiple Rmail files, each one can have its own summary buffer. -The summary buffer name is made by appending @samp{-summary} to the -Rmail buffer's name. Normally only one summary buffer is displayed at a -time. - -@menu -* Rmail Make Summary:: Making various sorts of summaries. -* Rmail Summary Edit:: Manipulating messages from the summary. -@end menu - -@node Rmail Make Summary -@subsection Making Summaries - - Here are the commands to create a summary for the current Rmail file. -Once the Rmail file has a summary buffer, changes in the Rmail file -(such as deleting or expunging messages, and getting new mail) -automatically update the summary. - -@table @kbd -@item h -@itemx C-M-h -Summarize all messages (@code{rmail-summary}). -@item l @var{labels} @key{RET} -@itemx C-M-l @var{labels} @key{RET} -Summarize messages that have one or more of the specified labels -(@code{rmail-summary-by-labels}). -@item C-M-r @var{rcpts} @key{RET} -Summarize messages that have one or more of the specified recipients -(@code{rmail-summary-by-recipients}). -@item C-M-t @var{topic} @key{RET} -Summarize messages that have a match for the specified regexp -@var{topic} in their subjects (@code{rmail-summary-by-topic}). -@item C-M-s @var{regexp} -Summarize messages whose headers and the subject line match the -specified regular expression @var{regexp} -(@code{rmail-summary-by-regexp}). -@end table - -@kindex h @r{(Rmail)} -@findex rmail-summary - The @kbd{h} or @kbd{C-M-h} (@code{rmail-summary}) command fills the summary buffer -for the current Rmail file with a summary of all the messages in the file. -It then displays and selects the summary buffer in another window. - -@kindex l @r{(Rmail)} -@kindex C-M-l @r{(Rmail)} -@findex rmail-summary-by-labels - @kbd{C-M-l @var{labels} @key{RET}} (@code{rmail-summary-by-labels}) makes -a partial summary mentioning only the messages that have one or more of the -labels @var{labels}. @var{labels} should contain label names separated by -commas. - -@kindex C-M-r @r{(Rmail)} -@findex rmail-summary-by-recipients - @kbd{C-M-r @var{rcpts} @key{RET}} (@code{rmail-summary-by-recipients}) -makes a partial summary mentioning only the messages that have one or more -of the recipients @var{rcpts}. @var{rcpts} should contain mailing -addresses separated by commas. - -@kindex C-M-t @r{(Rmail)} -@findex rmail-summary-by-topic - @kbd{C-M-t @var{topic} @key{RET}} (@code{rmail-summary-by-topic}) -makes a partial summary mentioning only the messages whose subjects have -a match for the regular expression @var{topic}. - -@kindex C-M-s @r{(Rmail)} -@findex rmail-summary-by-regexp - @kbd{C-M-s @var{regexp} @key{RET}} (@code{rmail-summary-by-regexp}) -makes a partial summary which mentions only the messages whose headers -(including the date and the subject lines) match the regular -expression @var{regexp}. - - Note that there is only one summary buffer for any Rmail file; -making any kind of summary discards any previous summary. - -@vindex rmail-summary-window-size -@vindex rmail-summary-line-count-flag - The variable @code{rmail-summary-window-size} says how many lines to -use for the summary window. The variable -@code{rmail-summary-line-count-flag} controls whether the summary line -for a message should include the line count of the message. - -@node Rmail Summary Edit -@subsection Editing in Summaries - - You can use the Rmail summary buffer to do almost anything you can do -in the Rmail buffer itself. In fact, once you have a summary buffer, -there's no need to switch back to the Rmail buffer. - - You can select and display various messages in the Rmail buffer, from -the summary buffer, just by moving point in the summary buffer to -different lines. It doesn't matter what Emacs command you use to move -point; whichever line point is on at the end of the command, that -message is selected in the Rmail buffer. - - Almost all Rmail commands work in the summary buffer as well as in the -Rmail buffer. Thus, @kbd{d} in the summary buffer deletes the current -message, @kbd{u} undeletes, and @kbd{x} expunges. (However, in the -summary buffer, a numeric argument to @kbd{d}, @kbd{C-d} and @kbd{u} -serves as a repeat count. A negative argument reverses the meaning of -@kbd{d} and @kbd{C-d}.) @kbd{o} and @kbd{C-o} output the current -message to a file; @kbd{r} starts a reply to it. You can scroll the -current message while remaining in the summary buffer using @key{SPC} -and @key{DEL}. - - The Rmail commands to move between messages also work in the summary -buffer, but with a twist: they move through the set of messages included -in the summary. They also ensure the Rmail buffer appears on the screen -(unlike cursor motion commands, which update the contents of the Rmail -buffer but don't display it in a window unless it already appears). -Here is a list of these commands: - -@table @kbd -@item n -Move to next line, skipping lines saying `deleted', and select its -message. -@item p -Move to previous line, skipping lines saying `deleted', and select -its message. -@item M-n -Move to next line and select its message. -@item M-p -Move to previous line and select its message. -@item > -Move to the last line, and select its message. -@item < -Move to the first line, and select its message. -@item j -@itemx @key{RET} -Select the message on the current line (ensuring that the RMAIL buffer -appears on the screen). With argument @var{n}, select message number -@var{n} and move to its line in the summary buffer; this signals an -error if the message is not listed in the summary buffer. -@item M-s @var{pattern} @key{RET} -Search through messages for @var{pattern} starting with the current -message; select the message found, and move point in the summary buffer -to that message's line. -@end table - -@vindex rmail-redisplay-summary - Deletion, undeletion, and getting new mail, and even selection of a -different message all update the summary buffer when you do them in the -Rmail buffer. If the variable @code{rmail-redisplay-summary} is -non-@code{nil}, these actions also bring the summary buffer back onto -the screen. - -@kindex Q @r{(Rmail summary)} -@findex rmail-summary-wipe -@kindex q @r{(Rmail summary)} -@findex rmail-summary-quit - When you are finished using the summary, type @kbd{Q} -(@code{rmail-summary-wipe}) to delete the summary buffer's window. You -can also exit Rmail while in the summary: @kbd{q} -(@code{rmail-summary-quit}) deletes the summary window, then exits from -Rmail by saving the Rmail file and switching to another buffer. - -@node Rmail Sorting -@section Sorting the Rmail File - -@table @kbd -@item M-x rmail-sort-by-date -Sort messages of current Rmail file by date. - -@item M-x rmail-sort-by-subject -Sort messages of current Rmail file by subject. - -@item M-x rmail-sort-by-author -Sort messages of current Rmail file by author's name. - -@item M-x rmail-sort-by-recipient -Sort messages of current Rmail file by recipient's names. - -@item M-x rmail-sort-by-correspondent -Sort messages of current Rmail file by the name of the other -correspondent. - -@item M-x rmail-sort-by-lines -Sort messages of current Rmail file by size (number of lines). - -@item M-x rmail-sort-by-keywords @key{RET} @var{labels} @key{RET} -Sort messages of current Rmail file by labels. The argument -@var{labels} should be a comma-separated list of labels. The order of -these labels specifies the order of messages; messages with the first -label come first, messages with the second label come second, and so on. -Messages which have none of these labels come last. -@end table - - The Rmail sort commands perform a @emph{stable sort}: if there is no -reason to prefer either one of two messages, their order remains -unchanged. You can use this to sort by more than one criterion. For -example, if you use @code{rmail-sort-by-date} and then -@code{rmail-sort-by-author}, messages from the same author appear in -order by date. - - With a numeric argument, all these commands reverse the order of -comparison. This means they sort messages from newest to oldest, from -biggest to smallest, or in reverse alphabetical order. - -@node Rmail Display -@section Display of Messages - - Rmail reformats the header of each message before displaying it for -the first time. Reformatting hides uninteresting header fields to -reduce clutter. You can use the @kbd{t} command to show the entire -header or to repeat the header reformatting operation. - -@table @kbd -@item t -Toggle display of complete header (@code{rmail-toggle-header}). -@end table - -@vindex rmail-ignored-headers -@vindex rmail-nonignored-headers - Reformatting the header involves deleting most header fields, on the -grounds that they are not interesting. The variable -@code{rmail-ignored-headers} holds a regular expression that specifies -which header fields to hide in this way---if it matches the beginning -of a header field, that whole field is hidden. However, the variable -@code{rmail-nonignored-headers} provides a further override: a header -matching that regular expression is shown even if it matches -@code{rmail-ignored-headers} too. - -@kindex t @r{(Rmail)} -@findex rmail-toggle-header - Rmail saves the complete original header before reformatting; to see -it, use the @kbd{t} command (@code{rmail-toggle-header}). This -discards the reformatted headers of the current message and displays -it with the original header. Repeating @kbd{t} reformats the message -again, which shows only the interesting headers according to the -current values of those variable. Selecting the message again also -reformats it if necessary. - - One consequence of this is that if you edit the reformatted header -(using @kbd{e}; @pxref{Rmail Editing}), subsequent use of @kbd{t} will -discard your edits. On the other hand, if you use @kbd{e} after -@kbd{t}, to edit the original (unreformatted) header, those changes are -permanent. - - When the @kbd{t} command has a prefix argument, a positive argument -means to show the reformatted header, and a zero or negative argument -means to show the full header. - -@vindex rmail-highlighted-headers - When the terminal supports multiple fonts or colors, Rmail -highlights certain header fields that are especially interesting---by -default, the @samp{From} and @samp{Subject} fields. The variable -@code{rmail-highlighted-headers} holds a regular expression that -specifies the header fields to highlight; if it matches the beginning -of a header field, that whole field is highlighted. - - If you specify unusual colors for your text foreground and -background, the colors used for highlighting may not go well with -them. If so, specify different colors by setting the variable -@code{rmail-highlight-face} to a suitable face. To turn off -highlighting entirely in Rmail, set @code{rmail-highlighted-headers} -to @code{nil}. - - You can highlight and activate URLs in incoming messages by adding -the function @code{goto-address} to the hook -@code{rmail-show-message-hook}. Then you can browse these URLs by -clicking on them with @kbd{Mouse-2} (or @kbd{Mouse-1} quickly) or by -moving to one and typing @kbd{C-c @key{RET}}. @xref{Goto-address, -Activating URLs, Activating URLs}. - -@node Rmail Coding -@section Rmail and Coding Systems - -@cindex decoding mail messages (Rmail) - Rmail automatically decodes messages which contain non-@acronym{ASCII} -characters, just as Emacs does with files you visit and with subprocess -output. Rmail uses the standard @samp{charset=@var{charset}} header in -the message, if any, to determine how the message was encoded by the -sender. It maps @var{charset} into the corresponding Emacs coding -system (@pxref{Coding Systems}), and uses that coding system to decode -message text. If the message header doesn't have the @samp{charset} -specification, or if @var{charset} is not recognized, -Rmail chooses the coding system with the usual Emacs heuristics and -defaults (@pxref{Recognize Coding}). - -@cindex fixing incorrectly decoded mail messages - Occasionally, a message is decoded incorrectly, either because Emacs -guessed the wrong coding system in the absence of the @samp{charset} -specification, or because the specification was inaccurate. For -example, a misconfigured mailer could send a message with a -@samp{charset=iso-8859-1} header when the message is actually encoded -in @code{koi8-r}. When you see the message text garbled, or some of -its characters displayed as empty boxes, this may have happened. - -@findex rmail-redecode-body - You can correct the problem by decoding the message again using the -right coding system, if you can figure out or guess which one is -right. To do this, invoke the @kbd{M-x rmail-redecode-body} command. -It reads the name of a coding system, encodes the message body using -whichever coding system was used to decode it before, then redecodes -it using the coding system you specified. If you specified the right -coding system, the result should be readable. - - Decoding and encoding using the wrong coding system is lossless for -most encodings, in particular with 8-bit encodings such as iso-8859 or -koi8. So, if the initial attempt to redecode the message didn't -result in a legible text, you can try other coding systems until you -succeed. - - With some coding systems, notably those from the iso-2022 family, -information can be lost in decoding, so that encoding the message -again won't bring back the original incoming text. In such a case, -@code{rmail-redecode-body} cannot work. However, the problems that -call for use of @code{rmail-redecode-body} rarely occur with those -coding systems. So in practice the command works when you need it. - -@node Rmail Editing -@section Editing Within a Message - - Most of the usual Emacs commands are available in Rmail mode, though a -few, such as @kbd{C-M-n} and @kbd{C-M-h}, are redefined by Rmail for -other purposes. However, the Rmail buffer is normally read only, and -most of the letters are redefined as Rmail commands. If you want to -edit the text of a message, you must use the Rmail command @kbd{e}. - -@table @kbd -@item e -Edit the current message as ordinary text. -@end table - -@kindex e @r{(Rmail)} -@findex rmail-edit-current-message - The @kbd{e} command (@code{rmail-edit-current-message}) switches from -Rmail mode into Rmail Edit mode, another major mode which is nearly the -same as Text mode. The mode line indicates this change. - - In Rmail Edit mode, letters insert themselves as usual and the Rmail -commands are not available. When you are finished editing the message and -are ready to go back to Rmail, type @kbd{C-c C-c}, which switches back to -Rmail mode. Alternatively, you can return to Rmail mode but cancel all the -editing that you have done, by typing @kbd{C-c C-]}. - -@vindex rmail-edit-mode-hook - Entering Rmail Edit mode runs the hook @code{text-mode-hook}; then it -runs the hook @code{rmail-edit-mode-hook} (@pxref{Hooks}). It adds the -attribute @samp{edited} to the message. It also displays the full -headers of the message, so that you can edit the headers as well as the -body of the message, and your changes in the headers will be -permanent. - -@node Rmail Digest -@section Digest Messages -@cindex digest message -@cindex undigestify - - A @dfn{digest message} is a message which exists to contain and carry -several other messages. Digests are used on some moderated mailing -lists; all the messages that arrive for the list during a period of time -such as one day are put inside a single digest which is then sent to the -subscribers. Transmitting the single digest uses much less computer -time than transmitting the individual messages even though the total -size is the same, because the per-message overhead in network mail -transmission is considerable. - -@findex undigestify-rmail-message - When you receive a digest message, the most convenient way to read it is -to @dfn{undigestify} it: to turn it back into many individual messages. -Then you can read and delete the individual messages as it suits you. -To do this, select the digest message and type the command @kbd{M-x -undigestify-rmail-message}. This extracts the submessages as separate -Rmail messages, and inserts them following the digest. The digest -message itself is flagged as deleted. - -@node Out of Rmail -@section Converting an Rmail File to Inbox Format -@cindex Babyl format to Inbox format -@cindex converting Rmail file to mailbox format - -@findex unrmail - The command @kbd{M-x unrmail} converts a file in Rmail format to inbox -format (also known as the system mailbox, or mbox, format), so that -you can use it with other mail-editing tools. You must specify two -arguments, the name of the Rmail file and the name to use for the -converted file. @kbd{M-x unrmail} does not alter the Rmail file itself. - -@pindex b2m - @kbd{M-x unrmail} is useful if you can run Emacs on the machine -where the Rmail file resides, or can access the Rmail file remotely -(@pxref{Remote Files}) from a machine where Emacs is installed. If -accessing Rmail files from Emacs is impossible, you can use the -@command{b2m} program instead. @command{b2m} is part of the Emacs -distribution, it is installed into the same directory where all the -other auxiliary programs (@command{etags} etc.) are installed, and its -source is available in the Emacs source distribution, so that you -could copy the source to the target machine and compile it there. - - To convert a file @file{@var{babyl-file}} into @file{@var{mbox-file}}, -invoke @command{b2m} like this: - -@example - b2m < @var{babyl-file} > @var{mbox-file} -@end example - -@node Rmail Rot13 -@section Reading Rot13 Messages -@cindex rot13 code - - Mailing list messages that might offend some readers are sometimes -encoded in a simple code called @dfn{rot13}---so named because it -rotates the alphabet by 13 letters. This code is not for secrecy, as it -provides none; rather, it enables those who might be offended to avoid -seeing the real text of the message. - -@findex rot13-other-window - To view a buffer which uses the rot13 code, use the command @kbd{M-x -rot13-other-window}. This displays the current buffer in another window -which applies the code when displaying the text. - -@node Movemail -@section @code{movemail} program -@cindex @code{movemail} program - - When invoked for the first time, Rmail attempts to locate the -@code{movemail} program and determine its version. There are two -versions of @code{movemail} program: the native one, shipped with GNU -Emacs (the ``emacs version'') and the one included in GNU mailutils -(the ``mailutils version,'' @pxref{movemail,,,mailutils,GNU -mailutils}). They support the same command line syntax and the same -basic subset of options. However, the Mailutils version offers -additional features. - - The Emacs version of @code{movemail} is able to retrieve mail from -usual UNIX mailbox formats and from remote mailboxes using the POP3 -protocol. - - The Mailutils version is able to handle a wide set of mailbox -formats, such as plain UNIX mailboxes, @code{maildir} and @code{MH} -mailboxes, etc. It is able to retrieve remote mail using POP3 or -IMAP4 protocol, and can retrieve mail from them using a TLS encrypted -channel. It also accepts mailbox argument in the @acronym{URL} form. -The detailed description of mailbox @acronym{URL}s can be found in -@ref{URL,,,mailutils,Mailbox URL Formats}. In short, a @acronym{URL} -is: - -@smallexample -@var{proto}://[@var{user}[:@var{password}]@@]@var{host-or-file-name} -@end smallexample - -@noindent -where square brackets denote optional elements. - -@table @var -@item proto -Specifies the @dfn{mailbox protocol}, or @dfn{format} to -use. The exact semantics of the rest of @acronym{URL} elements depends -on the actual value of @var{proto} (see below). - -@item user -User name to access the remote mailbox. - -@item password -User password to access the remote mailbox. - -@item host-or-file-name -Hostname of the remote server for remote mailboxes or file name of a -local mailbox. -@end table - -@noindent -@var{Proto} can be one of: - -@table @code -@item mbox -Usual UNIX mailbox format. In this case, neither @var{user} nor -@var{pass} are used, and @var{host-or-file-name} denotes the file name of -the mailbox file, e.g., @code{mbox://var/spool/mail/smith}. - -@item mh -A local mailbox in the @acronym{MH} format. @var{User} and -@var{pass} are not used. @var{Host-or-file-name} denotes the name of -@acronym{MH} folder, e.g., @code{mh://Mail/inbox}. - -@item maildir -A local mailbox in the @acronym{maildir} format. @var{User} and -@var{pass} are not used, and @var{host-or-file-name} denotes the name of -@code{maildir} mailbox, e.g., @code{maildir://mail/inbox}. - -@item file -Any local mailbox format. Its actual format is detected automatically -by @code{movemail}. - -@item pop -A remote mailbox to be accessed via POP3 protocol. @var{User} -specifies the remote user name to use, @var{pass} may be used to -specify the user password, @var{host-or-file-name} is the name or IP -address of the remote mail server to connect to; e.g., -@code{pop://smith:guessme@@remote.server.net}. - -@item imap -A remote mailbox to be accessed via IMAP4 protocol. @var{User} -specifies the remote user name to use, @var{pass} may be used to -specify the user password, @var{host-or-file-name} is the name or IP -address of the remote mail server to connect to; -e.g., @code{imap://smith:guessme@@remote.server.net}. -@end table - - Alternatively, you can specify the file name of the mailbox to use. -This is equivalent to specifying the @samp{file} protocol: - -@smallexample -/var/spool/mail/@var{user} @equiv{} file://var/spool/mail/@var{user} -@end smallexample - -@vindex rmail-movemail-program -@vindex rmail-movemail-search-path - The variable @code{rmail-movemail-program} controls which version of -@code{movemail} to use. If that is a string, it specifies the -absolute file name of the @code{movemail} executable. If it is -@code{nil}, Rmail searches for @code{movemail} in the directories -listed in @code{rmail-movemail-search-path} and @code{exec-path}, then -in @code{exec-directory}. - -@node Remote Mailboxes -@section Retrieving Mail from Remote Mailboxes -@pindex movemail - - Some sites use a method called POP for accessing users' inbox data -instead of storing the data in inbox files. The @code{Emacs -movemail} can work with POP if you compile it with the macro -@code{MAIL_USE_POP} defined. (You can achieve that by specifying -@samp{--with-pop} when you run @code{configure} during the -installation of Emacs.) - -The Mailutils @code{movemail} by default supports POP, unless it was -configured with @samp{--disable-pop} option. - -Both versions of @code{movemail} only work with POP3, not with older -versions of POP. - -@cindex @env{MAILHOST} environment variable -@cindex POP mailboxes - No matter which flavor of @code{movemail} you use, you can specify -POP inbox by using POP @dfn{URL} (@pxref{Movemail}). A POP -@acronym{URL} is a ``file name'' of the form -@samp{pop://@var{username}@@@var{hostname}}, where -@var{hostname} is the host name or IP address of the remote mail -server and @var{username} is the user name on that server. -Additionally, you may specify the password in the mailbox @acronym{URL}: -@samp{pop://@var{username}:@var{password}@@@var{hostname}}. In this -case, @var{password} takes preference over the one set by -@code{rmail-remote-password}. This is especially useful if you have -several remote mailboxes with different passwords. - - For backward compatibility, Rmail also supports two alternative ways -of specifying remote POP mailboxes. First, specifying an inbox name -in the form @samp{po:@var{username}:@var{hostname}} is equivalent to -@samp{pop://@var{username}@@@var{hostname}}. Alternatively, you may -set a ``file name'' of @samp{po:@var{username}} in the inbox list of -an Rmail file. @code{movemail} will handle such a name by opening a -connection to the POP server. In this case, the @env{MAILHOST} -environment variable specifies the machine on which to look for the -POP server. - -@cindex IMAP mailboxes - Another method for accessing remote mailboxes is IMAP. This method is -supported only by the Mailutils @code{movemail}. To specify an IMAP -mailbox in the inbox list, use the following mailbox @acronym{URL}: -@samp{imap://@var{username}[:@var{password}]@@@var{hostname}}. The -@var{password} part is optional, as described above. - -@vindex rmail-remote-password -@vindex rmail-remote-password-required -@vindex rmail-pop-password -@vindex rmail-pop-password-required - Accessing a remote mailbox may require a password. Rmail uses the -following algorithm to retrieve it: - -@enumerate -@item -If the @var{password} is present in mailbox URL (see above), it is -used. -@item -If the variable @code{rmail-remote-password} is non-@code{nil}, its -value is used. -@item -Otherwise, if @code{rmail-remote-password-required} is non-@code{nil}, -then Rmail will ask you for the password to use. -@item -Otherwise, Rmail assumes no password is required. -@end enumerate - - For compatibility with previous versions, the variables -@code{rmail-pop-password} and @code{rmail-pop-password-required} may -be used instead of @code{rmail-remote-password} and -@code{rmail-remote-password-required}. - -@vindex rmail-movemail-flags - If you need to pass additional command-line flags to @code{movemail}, -set the variable @code{rmail-movemail-flags} a list of the flags you -wish to use. Do not use this variable to pass the @samp{-p} flag to -preserve your inbox contents; use @code{rmail-preserve-inbox} instead. - -@cindex Kerberos POP authentication - The @code{movemail} program installed at your site may support -Kerberos authentication. If it is -supported, it is used by default whenever you attempt to retrieve -POP mail when @code{rmail-pop-password} and -@code{rmail-pop-password-required} are unset. - -@cindex reverse order in POP inboxes - Some POP servers store messages in reverse order. If your server does -this, and you would rather read your mail in the order in which it was -received, you can tell @code{movemail} to reverse the order of -downloaded messages by adding the @samp{-r} flag to -@code{rmail-movemail-flags}. - -@cindex TLS encryption (Rmail) - Mailutils @code{movemail} supports TLS encryption. If you wish to -use it, add the @samp{--tls} flag to @code{rmail-movemail-flags}. - -@node Other Mailbox Formats -@section Retrieving Mail from Local Mailboxes in Various Formats - - If your incoming mail is stored on a local machine in a format other -than UNIX mailbox, you will need the Mailutils @code{movemail} to -retrieve it. @xref{Movemail}, for the detailed description of -@code{movemail} versions. For example, to access mail from a inbox in -@code{maildir} format located in @file{/var/spool/mail/in}, you would -include the following in the Rmail inbox list: - -@smallexample -maildir://var/spool/mail/in -@end smallexample - -@ignore - arch-tag: 034965f6-38df-47a2-a9f1-b8bc8ab37e23 -@end ignore