# HG changeset patch # User Karl Berry # Date 1181695503 0 # Node ID 919d04a3dedad025194f77878e06eb7cbc5613c5 # Parent 1c1d498b545823339fce7980f3eae7e11eab7bd8 update two-volume material for printing diff -r 1c1d498b5458 -r 919d04a3deda lispref/two-volume.make --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/lispref/two-volume.make Wed Jun 13 00:45:03 2007 +0000 @@ -0,0 +1,226 @@ +# Copyright 2007 Free Software Foundation, Inc. +# See end for copying conditions. + +# although it would be nice to use tex rather than pdftex to avoid +# colors, spurious warnings about names being referenced but not +# existing, etc., dvips | ps2pdf doesn't preserve the page size. +# Instead of creating a special dvips config file, put up with the warnings. +tex = pdftex -interaction=nonstopmode + +all: vol1.pdf vol2.pdf + +# vol1.texi and vol2.texi specially define \tocreadfilename so we can +# use our premade .toc's. +# +vol1.pdf: elisp1med-fns-ready elisp1med-aux-ready elisp1med-toc-ready + @echo -e "\f Final TeX run for volume 1..." + cp elisp1med-toc-ready elisp1-toc-ready.toc + cp elisp1med-fns-ready vol1.fns + cp elisp1med-aux-ready vol1.aux + $(tex) vol1.texi +# +vol2.pdf: elisp2med-fns-ready elisp2med-aux-ready elisp2med-toc-ready + @echo "Final TeX run for volume 2..." + cp elisp2med-toc-ready elisp2-toc-ready.toc + cp elisp2med-fns-ready vol2.fns + cp elisp2med-aux-ready vol2.aux + $(tex) vol2.texi + +# intermediate toc files. +# +# vol1 toc: volume 1, page break, volume 2 (with II: prepended). +elisp1med-toc-ready: elisp1med-init elisp2med-init + echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@ + cat elisp1med-toc >>$@ + echo '@page' >>$@ + echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@ + sed 's/{\([^}]*\)}$$/{II:\1}/' elisp2med-toc >>$@ +# +# vol2 toc: volume 1 (with I: prepended), page break, volume 2. +elisp2med-toc-ready: elisp1med-init elisp2med-init + echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@ + sed 's/{\([^}]*\)}$$/{I:\1}/' elisp1med-toc >>$@ + echo '@page' >>$@ + echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@ + cat elisp2med-toc >>$@ + + +# intermediate aux files. +# +# append vol2's fixed aux to normal vol1. +elisp1med-aux-ready: elisp2med-aux-vol-added + cat elisp1med-aux $< >$@ +# +# prepend vol1's fixed aux to vol2. +elisp2med-aux-ready: elisp1med-aux-vol-added + cat $< elisp2med-aux >$@ + +# on -pg entries, append volume number after page number. +elisp1med-aux-vol-added: elisp1med-init + sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie1}/' elisp1med-aux >$@ +# +elisp2med-aux-vol-added: elisp2med-init + sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie2}/' elisp2med-aux >$@ + + + +# intermediate index (fns) file. +# +elisp1med-fns-ready: elisp1med-fn-vol-added elisp2med-fn-vol-added + cat elisp2med-fn-vol-added >>vol1.fn + texindex vol1.fn + cp vol1.fns $@ +# +elisp2med-fns-ready: elisp1med-fn-vol-added elisp2med-fn-vol-added + cat elisp1med-fn-vol-added >>vol2.fn + texindex vol2.fn + cp vol2.fns $@ + +# Insert volume number (I: or II:) into index file. +elisp1med-fn-vol-added: elisp1med-init + cp vol1.fn elisp1med-fn + sed 's/}{/}{I:/' elisp1med-fn >$@ +# +elisp2med-fn-vol-added: elisp2med-init + cp vol2.fn elisp2med-fn + sed 's/}{/}{II:/' elisp2med-fn >$@ + +# ----------------------------------------------------------------------------- +# everything above is essentially a duplicate of everything below. sorry. +# ----------------------------------------------------------------------------- + +# intermediate TeX runs. +# +# this generates what would be the final versions -- except the page +# numbers aren't right. The process of adding the I: and II: changes +# the page breaks, so a few index entries, at least are wrong. (In +# 2007, x-meta-keysym in vol.II ended up on page 374 when the index had +# it on page 375 from the initial run.) +# +# So, we start all over again, from these fns/aux/toc files. +# +elisp1med-init: elisp1-fns-ready elisp1-aux-ready elisp1init-toc-ready texinfo.tex + @echo -e "\f Intermediate TeX run for volume 1..." + cp elisp1init-toc-ready elisp1-toc-ready.toc + cp elisp1-fns-ready vol1.fns + cp elisp1-aux-ready vol1.aux + $(tex) vol1.texi + texindex vol1.?? + mv vol1.aux elisp1med-aux + mv vol1.toc elisp1med-toc +# +elisp2med-init: elisp2-fns-ready elisp2-aux-ready elisp2init-toc-ready texinfo.tex + @echo "Final TeX run for volume 2..." + cp elisp2init-toc-ready elisp2-toc-ready.toc + cp elisp2-fns-ready vol2.fns + cp elisp2-aux-ready vol2.aux + $(tex) vol2.texi + texindex vol2.?? + mv vol2.aux elisp2med-aux + mv vol2.toc elisp2med-toc + + +# initial toc files. +# +# vol1 toc: volume 1, page break, volume 2 (with II: prepended). +elisp1init-toc-ready: elisp1-init elisp2-init + echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@ + cat elisp1-toc >>$@ + echo '@page' >>$@ + echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@ + sed 's/{\([^}]*\)}$$/{II:\1}/' elisp2-toc >>$@ +# +# vol2 toc: volume 1 (with I: prepended), page break, volume 2. +elisp2init-toc-ready: elisp1-init elisp2-init + echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@ + sed 's/{\([^}]*\)}$$/{I:\1}/' elisp1-toc >>$@ + echo '@page' >>$@ + echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@ + cat elisp2-toc >>$@ + + +# initial aux files. +# +# append vol2's fixed aux to normal vol1. The initial runs saved +# elisp1-aux and elisp2-aux. +elisp1-aux-ready: elisp2-aux-vol-added + cat elisp1-aux $< >$@ +# +# prepend vol1's fixed aux to vol2. +elisp2-aux-ready: elisp1-aux-vol-added + cat $< elisp2-aux >$@ + +# on -pg entries, append volume number after page number. +elisp1-aux-vol-added: elisp1-init + sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie1}/' elisp1-aux >$@ +# +elisp2-aux-vol-added: elisp2-init + sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie2}/' elisp2-aux >$@ + + +# initial index (fns) file. +# +# Append other volume's index entries to this one's. +# Index entries in this volume will then take precedence. +elisp1-fns-ready: elisp1-fn-vol-added elisp2-fn-vol-added + cat elisp2-fn-vol-added >>vol1.fn + texindex vol1.fn + cp vol1.fns $@ +# +elisp2-fns-ready: elisp1-fn-vol-added elisp2-fn-vol-added + cat elisp1-fn-vol-added >>vol2.fn + texindex vol2.fn + cp vol2.fns $@ + +# Insert volume number (I: or II:) into index file. +elisp1-fn-vol-added: elisp1-init + cp vol1.fn elisp1-fn + sed 's/}{/}{I:/' elisp1-fn >$@ +# +elisp2-fn-vol-added: elisp2-init + cp vol2.fn elisp2-fn + sed 's/}{/}{II:/' elisp2-fn >$@ + + +# initial TeX runs. +# +# We use the .fn, .aux, and .toc files created here in subsequent +# processing. The page numbers generated here will not be correct yet, +# but we run texindex and TeX a second time just to get them closer. +# Otherwise it might take even longer for them to converge. +# +elisp1-init: vol1.texi + @echo -e "\f Initial TeX run for volume 1..." + rm -f vol1.aux vol1.toc + $(tex) $< + texindex vol1.?? + mv vol1.aux elisp1-aux + mv vol1.toc elisp1-toc + touch $@ +# +elisp2-init: vol2.texi + @echo "Initial TeX run for volume 2..." + rm -f vol2.aux vol2.toc + $(tex) $< + texindex vol2.?? + mv vol2.aux elisp2-aux + mv vol2.toc elisp2-toc + touch $@ + +# COPYING CONDITIONS +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This file is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this file; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. +