# HG changeset patch # User Stefan Monnier # Date 1129138132 0 # Node ID 99e68b20efb2370ea62fe281abf9f2e568a438a0 # Parent 9a0d9cf10142cbadfb1a5f629341ed5f028521ea (mixal-mode-syntax-table): Add \n as end-comment. (mixal-operation-codes): Remove. (mixal-operation-codes-alist): Immediately initialize to full value. (mixal-add-operation-code): Remove. (mixal-describe-operation-code): Make the arg non-optional. Use the interactive spec instead. Use mixal-operation-codes-alist rather than mixal-operation-codes. (mixal-font-lock-keywords): Don't highlight comments here any more. (mixal-font-lock-syntactic-keywords): New var. (mixal-mode): Use it. Fix comment-start-skip. diff -r 9a0d9cf10142 -r 99e68b20efb2 lisp/progmodes/mixal-mode.el --- a/lisp/progmodes/mixal-mode.el Wed Oct 12 14:22:36 2005 +0000 +++ b/lisp/progmodes/mixal-mode.el Wed Oct 12 17:28:52 2005 +0000 @@ -46,6 +46,14 @@ ;;; History: ;; Version 0.3: +;; 12/10/05: Stefan Monnier +;; Use font-lock-syntactic-keywords to detect/mark comments. +;; Use [^ \t\n]+ to match the operand part of a line. +;; Drop mixal-operation-codes. +;; Build the mixal-operation-codes-alist immediately. +;; Use `interactive' in mixal-describe-operation-code. +;; Remove useless ".*$" at the end of some regexps. +;; Fix the definition of comment-start-skip. ;; 08/10/05: sync mdk and emacs cvs ;; from emacs: compile-command and require-final-newline ;; from mdk: see version 0.2 @@ -79,10 +87,12 @@ ;;; Syntax table (defvar mixal-mode-syntax-table (let ((st (make-syntax-table))) - ;; (modify-syntax-entry ?* "<" st) we need to do a bit more to make - ;; (modify-syntax-entry ?\n ">" st) fontlocking for comments work + ;; We need to do a bit more to make fontlocking for comments work. + ;; See mixal-font-lock-syntactic-keywords. + ;; (modify-syntax-entry ?* "<" st) + (modify-syntax-entry ?\n ">" st) st) - "Syntax table for `dot-mode'.") + "Syntax table for `mixal-mode'.") (defvar mixal-font-lock-label-face 'font-lock-variable-name-face "Face name to use for label names. @@ -99,48 +109,10 @@ Default value is that of `font-lock-builtin-face', but you can modify its value.") -(defvar mixal-operation-codes - '("NOP" "ADD" "FADD" "SUB" "FSUB" "MUL" "FMUL" "DIV" "FDIV" "NUM" "CHAR" - "HLT" "SLA" "SRA" "SLAX" "SRAX" "SLC" "SRC" "MOVE" "LDA" "LD1" "LD2" "LD3" - "LD4" "LD5" "LD6" "LDX" "LDAN" "LD1N" "LD2N" "LD3N" "LD4N" "LD5N" "LD6N" - "LDXN" "STA" "ST1" "ST2" "ST3" "ST4" "ST5" "ST6" "STX" "STJ" "STZ" "JBUS" - "IOC" "IN" "OUT" "JRAD" "JMP" "JSJ" "JOV" "JNOV" - "JL" "JE" "JG" "JGE" "JNE" "JLE" - "JAN" "J1N" "J2N" "J3N" "J4N" "J5N" "J6N" "JXN" - "JAZ" "J1Z" "J2Z" "J3Z" "J4Z" "J5Z" "J6Z" "JXZ" - "JAP" "J1P" "J2P" "J3P" "J4P" "J5P" "J6P" "JXP" - "JANN" "J1NN" "J2NN" "J3NN" "J4NN" "J5NN" "J6NN" "JXNN" - "JANZ" "J1NZ" "J2NZ" "J3NZ" "J4NZ" "J5NZ" "J6NZ" "JXNZ" - "JANP" "J1NP" "J2NP" "J3NP" "J4NP" "J5NP" "J6NP" "JXNP" - "INCA" "DECA" "ENTA" "ENNA" "INC1" "DEC1" "ENT1" "ENN1" - "INC2" "DEC2" "ENT2" "ENN2" "INC3" "DEC3" "ENT3" "ENN3" "INC4" "DEC4" - "ENT4" "ENN4" "INC5" "DEC5" "ENT5" "ENN5" "INC6" "DEC6" "ENT6" "ENN6" - "INCX" "DECX" "ENTX" "ENNX" "CMPA" "FCMP" "CMP1" "CMP2" "CMP3" "CMP4" - "CMP5" "CMP6" "CMPX") - "List of possible operation codes as strings.") -;; (makunbound 'mixal-operation-codes) - (defvar mixal-assembly-pseudoinstructions '("ORIG" "EQU" "CON" "ALF" "END") "List of possible assembly pseudoinstructions.") -;;; Font-locking: -(defvar mixal-font-lock-keywords - `(("^\\([A-Z0-9a-z]+\\).*$" - (1 mixal-font-lock-label-face)) - (,(regexp-opt mixal-operation-codes 'words) - . mixal-font-lock-operation-code-face) - (,(regexp-opt - mixal-assembly-pseudoinstructions 'words) - . mixal-font-lock-assembly-pseudoinstruction-face) - ("^[A-Z0-9a-z]*[ \t]+[A-ZO-9a-z]+[ \t]+\\(=.*=\\).*$" - (1 font-lock-constant-face)) - ("^[A-Z0-9a-z]*[ \t]+[A-Z0-9a-z]+[ \t]+[A-Z0-9a-z,():+-\\*=\" ]*\t+\\(.*\\)$" - (1 font-lock-comment-face)) - ("^\\*.*$" . font-lock-comment-face)) - "Keyword highlighting specification for `mixal-mode'.") -;; (makunbound 'mixal-font-lock-keywords) - ;;;; Compilation ;; Output from mixasm is compatible with default behavior of emacs, ;; I just added a key (C-cc) and modified the make-command. @@ -149,7 +121,954 @@ ;; Tabs works well by default. ;;;; Describe -(defvar mixal-operation-codes-alist '() +(defvar mixal-operation-codes-alist + ;; FIXME: the codes FADD, FSUB, FMUL, FDIV, JRAD, and FCMP were in + ;; mixal-operation-codes but not here. They should probably be added here. + `((LDA loading "load A" 8 field + "Put in rA the contents of cell no. M. +Uses a + when there is no sign in subfield. Subfield is left padded with +zeros to make a word." + 2) + + (LDX loading "load X" 15 field + "Put in rX the contents of cell no. M. +Uses a + when there is no sign in subfield. Subfield is left padded with +zeros to make a word." + 2) + + (LD1 loading "load I1" ,(+ 8 1) field + "Put in rI1 the contents of cell no. M. +Uses a + when there is no sign in subfield. Subfield is left padded with +zeros to make a word. Index registers only have 2 bytes and a sign, Trying +to set anything more that that will result in undefined behavior." + 2) + + (LD2 loading "load I2" ,(+ 8 2) field + "Put in rI2 the contents of cell no. M. +Uses a + when there is no sign in subfield. Subfield is left padded with +zeros to make a word. Index registers only have 2 bytes and a sign, Trying +to set anything more that that will result in undefined behavior." + 2) + + (LD3 loading "load I3" ,(+ 8 3) field + "Put in rI3 the contents of cell no. M. +Uses a + when there is no sign in subfield. Subfield is left padded with +zeros to make a word. Index registers only have 2 bytes and a sign, Trying +to set anything more that that will result in undefined behavior." + 2) + + (LD4 loading "load I4" ,(+ 8 4) field + "Put in rI4 the contents of cell no. M. +Uses a + when there is no sign in subfield. Subfield is left padded with +zeros to make a word. Index registers only have 2 bytes and a sign, Trying +to set anything more that that will result in undefined behavior." + 2) + + (LD5 loading "load I5" ,(+ 8 5) field + "Put in rI5 the contents of cell no. M. +Uses a + when there is no sign in subfield. Subfield is left padded with +zeros to make a word. Index registers only have 2 bytes and a sign, Trying +to set anything more that that will result in undefined behavior." + 2) + + (LD6 loading "load I6" ,(+ 8 6) field + "Put in rI6 the contents of cell no. M. +Uses a + when there is no sign in subfield. Subfield is left padded with +zeros to make a word. Index registers only have 2 bytes and a sign, Trying +to set anything more that that will result in undefined behavior." + 2) + + (LDAN loading "load A negative" 16 field + "Put in rA the contents of cell no. M, with opposite sign. +Uses a + when there is no sign in subfield, otherwise use the opposite sign. +Subfield is left padded with zeros to make a word." + 2) + + (LDXN loading "load X negative" 23 field + "Put in rX the contents of cell no. M, with opposite sign. +Uses a + when there is no sign in subfield, otherwise use the opposite sign. +Subfield is left padded with zeros to make a word." + 2) + + (LD1N loading "load I1 negative" ,(+ 16 1) field + "Put in rI1 the contents of cell no. M, with opposite sign. +Uses a + when there is no sign in subfield, otherwise use the opposite sign. +Subfield is left padded with zeros to make a word. Index registers only +have 2 bytes and a sign, Trying to set anything more that that will result +in undefined behavior." + 2) + + (LD2N loading "load I2 negative" ,(+ 16 2) field + "Put in rI2 the contents of cell no. M, with opposite sign. +Uses a + when there is no sign in subfield, otherwise use the opposite sign. +Subfield is left padded with zeros to make a word. Index registers only +have 2 bytes and a sign, Trying to set anything more that that will result +in undefined behavior." + 2) + + (LD3N loading "load I3 negative" ,(+ 16 3) field + "Put in rI3 the contents of cell no. M, with opposite sign. +Uses a + when there is no sign in subfield, otherwise use the opposite sign. +Subfield is left padded with zeros to make a word. Index registers only +have 2 bytes and a sign, Trying to set anything more that that will result +in undefined behavior." + 2) + + (LD4N loading "load I4 negative" ,(+ 16 4) field + "Put in rI4 the contents of cell no. M, with opposite sign. +Uses a + when there is no sign in subfield, otherwise use the opposite sign. +Subfield is left padded with zeros to make a word. Index registers only +have 2 bytes and a sign, Trying to set anything more that that will result +in undefined behavior." + 2) + + (LD5N loading "load I5 negative" ,(+ 16 5) field + "Put in rI5 the contents of cell no. M, with opposite sign. +Uses a + when there is no sign in subfield, otherwise use the opposite sign. +Subfield is left padded with zeros to make a word. Index registers only +have 2 bytes and a sign, Trying to set anything more that that will result +in undefined behavior." + 2) + + (LD6N loading "load I6 negative" ,(+ 16 6) field + "Put in rI6 the contents of cell no. M, with opposite sign. +Uses a + when there is no sign in subfield, otherwise use the opposite sign. +Subfield is left padded with zeros to make a word. Index registers only +have 2 bytes and a sign, Trying to set anything more that that will result +in undefined behavior." + 2) + + (STA storing "store A" 24 field + "Store in cell Nr. M the contents of rA. +The modification of the operation code represents the subfield of the +memory cell that is to be overwritten with bytes from a register. These +bytes are taken beginning by the rightmost side of the register. The +sign of the memory cell is not changed, unless it is part of the subfield." + 2) + + (STX storing "store X" 31 field + "Store in cell Nr. M the contents of rX. +The modification of the operation code represents the subfield of the +memory cell that is to be overwritten with bytes from a register. These +bytes are taken beginning by the rightmost side of the register. The +sign of the memory cell is not changed, unless it is part of the subfield." + 2) + + (ST1 storing "store I1" ,(+ 24 1) field + "Store in cell Nr. M the contents of rI1. +The modification of the operation code represents the subfield of the +memory cell that is to be overwritten with bytes from a register. These +bytes are taken beginning by the rightmost side of the register. The +sign of the memory cell is not changed, unless it is part of the subfield. +Because index registers only have 2 bytes and a sign, the rest of the bytes +are assumed to be 0." + 2) + + (ST2 storing "store I2" ,(+ 24 2) field + "Store in cell Nr. M the contents of rI2. +The modification of the operation code represents the subfield of the +memory cell that is to be overwritten with bytes from a register. These +bytes are taken beginning by the rightmost side of the register. The +sign of the memory cell is not changed, unless it is part of the subfield. +Because index registers only have 2 bytes and a sign, the rest of the bytes +are assumed to be 0." + 2) + + (ST3 storing "store I3" ,(+ 24 3) field + "Store in cell Nr. M the contents of rI3. +The modification of the operation code represents the subfield of the +memory cell that is to be overwritten with bytes from a register. These +bytes are taken beginning by the rightmost side of the register. The +sign of the memory cell is not changed, unless it is part of the subfield. +Because index registers only have 2 bytes and a sign, the rest of the bytes +are assumed to be 0." + 2) + + (ST4 storing "store I4" ,(+ 24 4) field + "Store in cell Nr. M the contents of rI4. +The modification of the operation code represents the subfield of the +memory cell that is to be overwritten with bytes from a register. These +bytes are taken beginning by the rightmost side of the register. The +sign of the memory cell is not changed, unless it is part of the subfield. +Because index registers only have 2 bytes and a sign, the rest of the bytes +are assumed to be 0." + 2) + + (ST5 storing "store I5" ,(+ 24 5) field + "Store in cell Nr. M the contents of rI5. +The modification of the operation code represents the subfield of the +memory cell that is to be overwritten with bytes from a register. These +bytes are taken beginning by the rightmost side of the register. The +sign of the memory cell is not changed, unless it is part of the subfield. +Because index registers only have 2 bytes and a sign, the rest of the bytes +are assumed to be 0." + 2) + + (ST6 storing "store I6" ,(+ 24 6) field + "Store in cell Nr. M the contents of rI6. +The modification of the operation code represents the subfield of the +memory cell that is to be overwritten with bytes from a register. These +bytes are taken beginning by the rightmost side of the register. The +sign of the memory cell is not changed, unless it is part of the subfield. +Because index registers only have 2 bytes and a sign, the rest of the bytes +are assumed to be 0." + 2) + + (STJ storing "store J" 32 field + "Store in cell Nr. M the contents of rJ. +The modification of the operation code represents the subfield of the +memory cell that is to be overwritten with bytes from a register. These +bytes are taken beginning by the rightmost side of the register. The sign +of rJ is always +, sign of the memory cell is not changed, unless it is +part of the subfield. The default field for STJ is (0:2)." + 2) + + (STZ storing "store zero" 33 field + "Store in cell Nr. M '+ 0'. +The modification of the operation code represents the subfield of the +memory cell that is to be overwritten with zeros." + 2) + + (ADD arithmetic "add" 1 field + "Add to A the contents of cell Nr. M. +Subfield is padded with zero to make a word. +If the result is to large, the operation result modulo 1,073,741,823 (the +maximum value storable in a MIX word) is stored in `rA', and the overflow +toggle is set to TRUE." + 2) + + (SUB arithmetic "subtract" 2 field + "Subtract to A the contents of cell Nr. M. +Subfield is padded with zero to make a word. +If the result is to large, the operation result modulo 1,073,741,823 (the +maximum value storable in a MIX word) is stored in `rA', and the overflow +toggle is set to TRUE." + 2) + + (MUL arithmetic "multiply" 3 field + "Multiplies the contents of cell Nr. M with A, result is 10 bytes and stored in rA and rX. +The sign is + if the sign of rA and cell M where the same, otherwise, it is -" + 10) + + (DIV arithmetic "divide" 4 field + "Both rA and rX are taken together and divided by cell Nr. M, quotient is placed in rA, remainder in rX. +The sign is taken from rA, and after the divide the sign of rA is set to + when +both the sign of rA and M where the same. Divide by zero and overflow of rA +result in undefined behavior." + 12) + + (ENTA address-transfer "enter A" 48 + "Literal value is stored in rA. +Indexed, stores value of index in rA." + 1) + + (ENTX address-transfer "enter X" 55 + "Literal value is stored in rX. +Indexed, stores value of index in rX." + 1) + + (ENT1 address-transfer "Enter rI1" ,(+ 48 1) + "Literal value is stored in rI1. +Indexed, stores value of index in rI1." + 1) + + (ENT2 address-transfer "Enter rI2" ,(+ 48 2) + "Literal value is stored in rI2. +Indexed, stores value of index in rI2." + 1) + + (ENT3 address-transfer "Enter rI3" ,(+ 48 3) + "Literal value is stored in rI3. +Indexed, stores value of index in rI3." + 1) + + (ENT4 address-transfer "Enter rI4" ,(+ 48 4) + "Literal value is stored in rI4. +Indexed, stores value of index in rI4." + 1) + + (ENT5 address-transfer "Enter rI5" ,(+ 48 5) + "Literal value is stored in rI5. +Indexed, stores value of index in rI5." + 1) + + (ENT6 address-transfer "Enter rI6" ,(+ 48 6) + "Literal value is stored in rI6. +Indexed, stores value of index in rI6." + 1) + + (ENNA address-transfer "enter negative A" 48 + "Literal value is stored in rA with opposite sign. +Indexed, stores value of index in rA with opposite sign." + 1) + + (ENNX address-transfer "enter negative X" 55 + "Literal value is stored in rX with opposite sign. +Indexed, stores value of index in rX with opposite sign." + 1) + + (ENN1 address-transfer "Enter negative rI1" ,(+ 48 1) + "Literal value is stored in rI1 with opposite sign. +Indexed, stores value of index in rI1 with opposite sign." + 1) + + (ENN2 address-transfer "Enter negative rI2" ,(+ 48 2) + "Literal value is stored in rI2 with opposite sign. +Indexed, stores value of index in rI2 with opposite sign." + 1) + + (ENN3 address-transfer "Enter negative rI3" ,(+ 48 3) + "Literal value is stored in rI3 with opposite sign. +Indexed, stores value of index in rI3 with opposite sign." + 1) + + (ENN4 address-transfer "Enter negative rI4" ,(+ 48 4) + "Literal value is stored in rI4 with opposite sign. +Indexed, stores value of index in rI4 with opposite sign." + 1) + + (ENN5 address-transfer "Enter negative rI5" ,(+ 48 5) + "Literal value is stored in rI5 with opposite sign. +Indexed, stores value of index in rI5 with opposite sign." + 1) + + (ENN6 address-transfer "Enter negative rI6" ,(+ 48 6) + "Literal value is stored in rI6 with opposite sign. +Indexed, stores value of index in rI6 with opposite sign." + 1) + + (INCA address-transfer "increase A" 48 + "Increase register A with the literal value of M. +On overflow the overflow toggle is set." + 1) + + (INCX address-transfer "increase X" 55 + "Increase register X with the literal value of M. +On overflow the overflow toggle is set." + 1) + + (INC1 address-transfer "increase I1" ,(+ 48 1) + "Increase register I1 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (INC2 address-transfer "increase I2" ,(+ 48 2) + "Increase register I2 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (INC3 address-transfer "increase I3" ,(+ 48 3) + "Increase register I3 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (INC4 address-transfer "increase I4" ,(+ 48 4) + "Increase register I4 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (INC5 address-transfer "increase I5" ,(+ 48 5) + "Increase register I5 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (INC6 address-transfer "increase I6" ,(+ 48 6) + "Increase register I6 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (DECA address-transfer "decrease A" 48 + "Decrease register A with the literal value of M. +On overflow the overflow toggle is set." + 1) + + (DECX address-transfer "decrease X" 55 + "Decrease register X with the literal value of M. +On overflow the overflow toggle is set." + 1) + + (DEC1 address-transfer "decrease I1" ,(+ 48 1) + "Decrease register I1 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (DEC2 address-transfer "decrease I2" ,(+ 48 2) + "Decrease register I2 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (DEC3 address-transfer "decrease I3" ,(+ 48 3) + "Decrease register I3 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (DEC4 address-transfer "decrease I4" ,(+ 48 4) + "Decrease register I4 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (DEC5 address-transfer "decrease I5" ,(+ 48 5) + "Decrease register I5 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (DEC6 address-transfer "decrease I6" ,(+ 48 6) + "Decrease register I6 with the literal value of M. +The result is undefined when the result does not fit in +2 bytes." + 1) + + (CMPA comparison "compare A" 56 field + "Compare contents of A with contents of M. +The field specifier works on both fields. The comparison indicator +is set to LESS, EQUAL or GREATER depending on the outcome." + 2) + + + (CMPX comparison "compare X" 63 field + "Compare contents of rX with contents of M. +The field specifier works on both fields. The comparison indicator +is set to LESS, EQUAL or GREATER depending on the outcome." + 2) + + + (CMP1 comparison "compare I1" ,(+ 56 1) field + "Compare contents of rI1 with contents of M. +The field specifier works on both fields. The comparison indicator +is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 +have a value of 0." + 2) + + + (CMP2 comparison "compare I2" ,(+ 56 2) field + "Compare contents of rI2 with contents of M. +The field specifier works on both fields. The comparison indicator +is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 +have a value of 0." + 2) + + + (CMP3 comparison "compare I3" ,(+ 56 3) field + "Compare contents of rI3 with contents of M. +The field specifier works on both fields. The comparison indicator +is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 +have a value of 0." + 2) + + + (CMP4 comparison "compare I4" ,(+ 56 4) field + "Compare contents of rI4 with contents of M. +The field specifier works on both fields. The comparison indicator +is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 +have a value of 0." + 2) + + + (CMP5 comparison "compare I5" ,(+ 56 5) field + "Compare contents of rI5 with contents of M. +The field specifier works on both fields. The comparison indicator +is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 +have a value of 0." + 2) + + + (CMP6 comparison "compare I6" ,(+ 56 6) field + "Compare contents of rI6 with contents of M. +The field specifier works on both fields. The comparison indicator +is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 +have a value of 0." + 2) + + (JMP jump "jump" 39 + "Unconditional jump. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + (JSJ jump "jump, save J" 39 + "Unconditional jump, but rJ is not modified." + 1) + + (JOV jump "jump on overflow" 39 + "Jump if OV is set (and turn it off). +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + (JNOV jump "Jump on no overflow" 39 + "Jump if OV is not set (and turn it off). +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + (JL jump "Jump on less" 39 + "Jump if '[CM] = L'. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JE jump "Jump on equal" 39 + "Jump if '[CM] = E'. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JG jump "Jump on greater" 39 + "Jump if '[CM] = G'. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JGE jump "Jump on not less" 39 + "Jump if '[CM]' does not equal 'L'. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JNE jump "Jump on not equal" 39 + "Jump if '[CM]' does not equal 'E'. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JLE jump "Jump on not greater" 39 + "Jump if '[CM]' does not equal 'G'. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + (JAN jump "jump A negative" 40 + "Jump if the content of rA is negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JAZ jump "jump A zero" 40 + "Jump if the content of rA is zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JAP jump "jump A positive" 40 + "Jump if the content of rA is positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JANN jump "jump A non-negative" 40 + "Jump if the content of rA is non-negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JANZ jump "jump A non-zero" 40 + "Jump if the content of rA is non-zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JANP jump "jump A non-positive" 40 + "Jump if the content of rA is non-positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + (JXN jump "jump X negative" 47 + "Jump if the content of rX is negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JXZ jump "jump X zero" 47 + "Jump if the content of rX is zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JXP jump "jump X positive" 47 + "Jump if the content of rX is positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JXNN jump "jump X non-negative" 47 + "Jump if the content of rX is non-negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JXNZ jump "jump X non-zero" 47 + "Jump if the content of rX is non-zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (JXNP jump "jump X non-positive" 47 + "Jump if the content of rX is non-positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + (J1N jump "jump I1 negative" ,(+ 40 1) + "Jump if the content of rI1 is negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J1Z jump "jump I1 zero" ,(+ 40 1) + "Jump if the content of rI1 is zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J1P jump "jump I1 positive" ,(+ 40 1) + "Jump if the content of rI1 is positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J1NN jump "jump I1 non-negative" ,(+ 40 1) + "Jump if the content of rI1 is non-negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J1NZ jump "jump I1 non-zero" ,(+ 40 1) + "Jump if the content of rI1 is non-zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J1NP jump "jump I1 non-positive" ,(+ 40 1) + "Jump if the content of rI1 is non-positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + (J2N jump "jump I2 negative" ,(+ 40 1) + "Jump if the content of rI2 is negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J2Z jump "jump I2 zero" ,(+ 40 1) + "Jump if the content of rI2 is zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J2P jump "jump I2 positive" ,(+ 40 1) + "Jump if the content of rI2 is positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J2NN jump "jump I2 non-negative" ,(+ 40 1) + "Jump if the content of rI2 is non-negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J2NZ jump "jump I2 non-zero" ,(+ 40 1) + "Jump if the content of rI2 is non-zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J2NP jump "jump I2 non-positive" ,(+ 40 1) + "Jump if the content of rI2 is non-positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J3N jump "jump I3 negative" ,(+ 40 1) + "Jump if the content of rI3 is negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J3Z jump "jump I3 zero" ,(+ 40 1) + "Jump if the content of rI3 is zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J3P jump "jump I3 positive" ,(+ 40 1) + "Jump if the content of rI3 is positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J3NN jump "jump I3 non-negative" ,(+ 40 1) + "Jump if the content of rI3 is non-negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J3NZ jump "jump I3 non-zero" ,(+ 40 1) + "Jump if the content of rI3 is non-zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J3NP jump "jump I3 non-positive" ,(+ 40 1) + "Jump if the content of rI3 is non-positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J4N jump "jump I4 negative" ,(+ 40 1) + "Jump if the content of rI4 is negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J4Z jump "jump I4 zero" ,(+ 40 1) + "Jump if the content of rI4 is zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J4P jump "jump I4 positive" ,(+ 40 1) + "Jump if the content of rI4 is positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J4NN jump "jump I4 non-negative" ,(+ 40 1) + "Jump if the content of rI4 is non-negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J4NZ jump "jump I4 non-zero" ,(+ 40 1) + "Jump if the content of rI4 is non-zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J4NP jump "jump I4 non-positive" ,(+ 40 1) + "Jump if the content of rI4 is non-positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J5N jump "jump I5 negative" ,(+ 40 1) + "Jump if the content of rI5 is negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J5Z jump "jump I5 zero" ,(+ 40 1) + "Jump if the content of rI5 is zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J5P jump "jump I5 positive" ,(+ 40 1) + "Jump if the content of rI5 is positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J5NN jump "jump I5 non-negative" ,(+ 40 1) + "Jump if the content of rI5 is non-negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J5NZ jump "jump I5 non-zero" ,(+ 40 1) + "Jump if the content of rI5 is non-zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J5NP jump "jump I5 non-positive" ,(+ 40 1) + "Jump if the content of rI5 is non-positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J6N jump "jump I6 negative" ,(+ 40 1) + "Jump if the content of rI6 is negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J6Z jump "jump I6 zero" ,(+ 40 1) + "Jump if the content of rI6 is zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J6P jump "jump I6 positive" ,(+ 40 1) + "Jump if the content of rI6 is positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J6NN jump "jump I6 non-negative" ,(+ 40 1) + "Jump if the content of rI6 is non-negative. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J6NZ jump "jump I6 non-zero" ,(+ 40 1) + "Jump if the content of rI6 is non-zero. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + + (J6NP jump "jump I6 non-positive" ,(+ 40 1) + "Jump if the content of rI6 is non-positive. +Register J is set to the value of the next instruction that would have +been executed when there was no jump." + 1) + + (SLA miscellaneous "shift left A" 6 + "Shift to A, M bytes left. +Hero's will be added to the right." + 2) + + + (SRA miscellaneous "shift right A" 6 + "Shift to A, M bytes right. +Zeros will be added to the left." + 2) + + + (SLAX miscellaneous "shift left AX" 6 + "Shift AX, M bytes left. +Zeros will be added to the right." + 2) + + + + (SRAX miscellaneous "shift right AX" 6 + "Shift AX, M bytes right. +Zeros will be added to the left." + 2) + + + (SLC miscellaneous "shift left AX circularly" 6 + "Shift AX, M bytes left circularly. +The bytes that fall off to the left will be added to the right." + 2) + + + (SRC miscellaneous "shift right AX circularly" 6 + "Shift AX, M bytes right circularly. +The bytes that fall off to the right will be added to the left." + 2) + + (MOVE miscellaneous "move" 7 number + "Move MOD words from M to the location stored in rI1." + (+ 1 (* 2 number))) + + (NOP miscellaneous "no operation" 0 ignored + "No operation, M and F are not used by the machine." + 1) + + (HLT miscellaneous "halt" 5 + "Halt. +Stop instruction fetching." + 1) + + (IN input-output "input" 36 unit + "Transfer a block of words from the specified unit to memory. +The transfer starts at address M." + 1) + + (OUT input-output "output" 37 unit + "Transfer a block of words from memory. +The transfer starts at address M to the specified unit." + 1) + + (IOC input-output "input-output control" 35 unit + "Perform a control operation. +The control operation is given by M on the specified unit." + 1) + + (JRED input-output "jump ready" 38 unit + "Jump to M if the specified unit is ready." + 1) + + + (JBUS input-output "jump busy" 34 unit + "Jump to M if the specified unit is busy." + 1) + + (NUM conversion "convert to numeric" 5 + "Convert rAX to its numerical value and store it in rA. +the register rAX is assumed to contain a character representation of +a number." + 10) + + (CHAR conversion "convert to characters" 5 + "Convert the number stored in rA to a character representation. +The converted character representation is stored in rAX." + 10)) + "Alist that contains all the possible operation codes for mix. Each elt has the form (OP-CODE GROUP FULL-NAME C-BYTE F-BYTE DESCRIPTION EXECUTION-TIME) @@ -162,1114 +1081,36 @@ EXECUTION-TIME holds info about the time it takes, number or string.") ;; (makunbound 'mixal-operation-codes-alist) -(defun mixal-add-operation-code (op-code group full-name C-byte F-byte - description execution-time) - "Add an operation code to `mixal-operation-codes-alist'." - (setq mixal-operation-codes-alist - (cons (list op-code group full-name C-byte F-byte - description execution-time) - mixal-operation-codes-alist))) -;; now add each operation code - -(mixal-add-operation-code - 'LDA 'loading "load A" 8 'field - "Put in rA the contents of cell no. M. -Uses a + when there is no sign in subfield. Subfield is left padded with -zeros to make a word." - 2) - -(mixal-add-operation-code - 'LDX 'loading "load X" 15 'field - "Put in rX the contents of cell no. M. -Uses a + when there is no sign in subfield. Subfield is left padded with -zeros to make a word." - 2) - -(mixal-add-operation-code - 'LD1 'loading "load I1" (+ 8 1) 'field - "Put in rI1 the contents of cell no. M. -Uses a + when there is no sign in subfield. Subfield is left padded with -zeros to make a word. Index registers only have 2 bytes and a sign, Trying -to set anything more that that will result in undefined behavior." - 2) - -(mixal-add-operation-code - 'LD2 'loading "load I2" (+ 8 2) 'field - "Put in rI2 the contents of cell no. M. -Uses a + when there is no sign in subfield. Subfield is left padded with -zeros to make a word. Index registers only have 2 bytes and a sign, Trying -to set anything more that that will result in undefined behavior." - 2) - -(mixal-add-operation-code - 'LD3 'loading "load I3" (+ 8 3) 'field - "Put in rI3 the contents of cell no. M. -Uses a + when there is no sign in subfield. Subfield is left padded with -zeros to make a word. Index registers only have 2 bytes and a sign, Trying -to set anything more that that will result in undefined behavior." - 2) - -(mixal-add-operation-code - 'LD4 'loading "load I4" (+ 8 4) 'field - "Put in rI4 the contents of cell no. M. -Uses a + when there is no sign in subfield. Subfield is left padded with -zeros to make a word. Index registers only have 2 bytes and a sign, Trying -to set anything more that that will result in undefined behavior." - 2) - -(mixal-add-operation-code - 'LD5 'loading "load I5" (+ 8 5) 'field - "Put in rI5 the contents of cell no. M. -Uses a + when there is no sign in subfield. Subfield is left padded with -zeros to make a word. Index registers only have 2 bytes and a sign, Trying -to set anything more that that will result in undefined behavior." - 2) - -(mixal-add-operation-code - 'LD6 'loading "load I6" (+ 8 6) 'field - "Put in rI6 the contents of cell no. M. -Uses a + when there is no sign in subfield. Subfield is left padded with -zeros to make a word. Index registers only have 2 bytes and a sign, Trying -to set anything more that that will result in undefined behavior." - 2) - -(mixal-add-operation-code - 'LDAN 'loading "load A negative" 16 'field - "Put in rA the contents of cell no. M, with opposite sign. -Uses a + when there is no sign in subfield, otherwise use the opposite sign. -Subfield is left padded with zeros to make a word." - 2) - -(mixal-add-operation-code - 'LDXN 'loading "load X negative" 23 'field - "Put in rX the contents of cell no. M, with opposite sign. -Uses a + when there is no sign in subfield, otherwise use the opposite sign. -Subfield is left padded with zeros to make a word." - 2) - -(mixal-add-operation-code - 'LD1N 'loading "load I1 negative" (+ 16 1) 'field - "Put in rI1 the contents of cell no. M, with opposite sign. -Uses a + when there is no sign in subfield, otherwise use the opposite sign. -Subfield is left padded with zeros to make a word. Index registers only -have 2 bytes and a sign, Trying to set anything more that that will result -in undefined behavior." - 2) - -(mixal-add-operation-code - 'LD2N 'loading "load I2 negative" (+ 16 2) 'field - "Put in rI2 the contents of cell no. M, with opposite sign. -Uses a + when there is no sign in subfield, otherwise use the opposite sign. -Subfield is left padded with zeros to make a word. Index registers only -have 2 bytes and a sign, Trying to set anything more that that will result -in undefined behavior." - 2) - -(mixal-add-operation-code - 'LD3N 'loading "load I3 negative" (+ 16 3) 'field - "Put in rI3 the contents of cell no. M, with opposite sign. -Uses a + when there is no sign in subfield, otherwise use the opposite sign. -Subfield is left padded with zeros to make a word. Index registers only -have 2 bytes and a sign, Trying to set anything more that that will result -in undefined behavior." - 2) - -(mixal-add-operation-code - 'LD4N 'loading "load I4 negative" (+ 16 4) 'field - "Put in rI4 the contents of cell no. M, with opposite sign. -Uses a + when there is no sign in subfield, otherwise use the opposite sign. -Subfield is left padded with zeros to make a word. Index registers only -have 2 bytes and a sign, Trying to set anything more that that will result -in undefined behavior." - 2) - -(mixal-add-operation-code - 'LD5N 'loading "load I5 negative" (+ 16 5) 'field - "Put in rI5 the contents of cell no. M, with opposite sign. -Uses a + when there is no sign in subfield, otherwise use the opposite sign. -Subfield is left padded with zeros to make a word. Index registers only -have 2 bytes and a sign, Trying to set anything more that that will result -in undefined behavior." - 2) - -(mixal-add-operation-code - 'LD6N 'loading "load I6 negative" (+ 16 6) 'field - "Put in rI6 the contents of cell no. M, with opposite sign. -Uses a + when there is no sign in subfield, otherwise use the opposite sign. -Subfield is left padded with zeros to make a word. Index registers only -have 2 bytes and a sign, Trying to set anything more that that will result -in undefined behavior." - 2) - -(mixal-add-operation-code - 'STA 'storing "store A" 24 'field - "Store in cell Nr. M the contents of rA. -The modification of the operation code represents the subfield of the -memory cell that is to be overwritten with bytes from a register. These -bytes are taken beginning by the rightmost side of the register. The -sign of the memory cell is not changed, unless it is part of the subfield." - 2) - -(mixal-add-operation-code - 'STX 'storing "store X" 31 'field - "Store in cell Nr. M the contents of rX. -The modification of the operation code represents the subfield of the -memory cell that is to be overwritten with bytes from a register. These -bytes are taken beginning by the rightmost side of the register. The -sign of the memory cell is not changed, unless it is part of the subfield." - 2) - -(mixal-add-operation-code - 'ST1 'storing "store I1" (+ 24 1) 'field - "Store in cell Nr. M the contents of rI1. -The modification of the operation code represents the subfield of the -memory cell that is to be overwritten with bytes from a register. These -bytes are taken beginning by the rightmost side of the register. The -sign of the memory cell is not changed, unless it is part of the subfield. -Because index registers only have 2 bytes and a sign, the rest of the bytes -are assumed to be 0." - 2) - -(mixal-add-operation-code - 'ST2 'storing "store I2" (+ 24 2) 'field - "Store in cell Nr. M the contents of rI2. -The modification of the operation code represents the subfield of the -memory cell that is to be overwritten with bytes from a register. These -bytes are taken beginning by the rightmost side of the register. The -sign of the memory cell is not changed, unless it is part of the subfield. -Because index registers only have 2 bytes and a sign, the rest of the bytes -are assumed to be 0." - 2) - -(mixal-add-operation-code - 'ST3 'storing "store I3" (+ 24 3) 'field - "Store in cell Nr. M the contents of rI3. -The modification of the operation code represents the subfield of the -memory cell that is to be overwritten with bytes from a register. These -bytes are taken beginning by the rightmost side of the register. The -sign of the memory cell is not changed, unless it is part of the subfield. -Because index registers only have 2 bytes and a sign, the rest of the bytes -are assumed to be 0." - 2) - -(mixal-add-operation-code - 'ST4 'storing "store I4" (+ 24 4) 'field - "Store in cell Nr. M the contents of rI4. -The modification of the operation code represents the subfield of the -memory cell that is to be overwritten with bytes from a register. These -bytes are taken beginning by the rightmost side of the register. The -sign of the memory cell is not changed, unless it is part of the subfield. -Because index registers only have 2 bytes and a sign, the rest of the bytes -are assumed to be 0." - 2) - -(mixal-add-operation-code - 'ST5 'storing "store I5" (+ 24 5) 'field - "Store in cell Nr. M the contents of rI5. -The modification of the operation code represents the subfield of the -memory cell that is to be overwritten with bytes from a register. These -bytes are taken beginning by the rightmost side of the register. The -sign of the memory cell is not changed, unless it is part of the subfield. -Because index registers only have 2 bytes and a sign, the rest of the bytes -are assumed to be 0." - 2) - -(mixal-add-operation-code - 'ST6 'storing "store I6" (+ 24 6) 'field - "Store in cell Nr. M the contents of rI6. -The modification of the operation code represents the subfield of the -memory cell that is to be overwritten with bytes from a register. These -bytes are taken beginning by the rightmost side of the register. The -sign of the memory cell is not changed, unless it is part of the subfield. -Because index registers only have 2 bytes and a sign, the rest of the bytes -are assumed to be 0." - 2) - -(mixal-add-operation-code - 'STJ 'storing "store J" 32 'field - "Store in cell Nr. M the contents of rJ. -The modification of the operation code represents the subfield of the -memory cell that is to be overwritten with bytes from a register. These -bytes are taken beginning by the rightmost side of the register. The sign -of rJ is always +, sign of the memory cell is not changed, unless it is -part of the subfield. The default field for STJ is (0:2)." - 2) - -(mixal-add-operation-code - 'STZ 'storing "store zero" 33 'field - "Store in cell Nr. M '+ 0'. -The modification of the operation code represents the subfield of the -memory cell that is to be overwritten with zeros." - 2) - -(mixal-add-operation-code - 'ADD 'arithmetic "add" 1 'field - "Add to A the contents of cell Nr. M. -Subfield is padded with zero to make a word. -If the result is to large, the operation result modulo 1,073,741,823 (the -maximum value storable in a MIX word) is stored in `rA', and the overflow -toggle is set to TRUE." - 2) - -(mixal-add-operation-code - 'SUB 'arithmetic "subtract" 2 'field - "Subtract to A the contents of cell Nr. M. -Subfield is padded with zero to make a word. -If the result is to large, the operation result modulo 1,073,741,823 (the -maximum value storable in a MIX word) is stored in `rA', and the overflow -toggle is set to TRUE." - 2) - -(mixal-add-operation-code - 'MUL 'arithmetic "multiply" 3 'field - "Multiplies the contents of cell Nr. M with A, result is 10 bytes and stored in rA and rX. -The sign is + if the sign of rA and cell M where the same, otherwise, it is -" - 10) - -(mixal-add-operation-code - 'DIV 'arithmetic "divide" 4 'field - "Both rA and rX are taken together and divided by cell Nr. M, quotient is placed in rA, remainder in rX. -The sign is taken from rA, and after the divide the sign of rA is set to + when -both the sign of rA and M where the same. Divide by zero and overflow of rA result -in undefined behavior." - 12) - -(mixal-add-operation-code - 'ENTA 'address-transfer "enter A" 48 2 - "Literal value is stored in rA. -Indexed, stores value of index in rA." - 1) - -(mixal-add-operation-code - 'ENTX 'address-transfer "enter X" 55 2 - "Literal value is stored in rX. -Indexed, stores value of index in rX." - 1) - -(mixal-add-operation-code - 'ENT1 'address-transfer "Enter rI1" (+ 48 1) 2 - "Literal value is stored in rI1. -Indexed, stores value of index in rI1." - 1) - -(mixal-add-operation-code - 'ENT2 'address-transfer "Enter rI2" (+ 48 2) 2 - "Literal value is stored in rI2. -Indexed, stores value of index in rI2." - 1) - -(mixal-add-operation-code - 'ENT3 'address-transfer "Enter rI3" (+ 48 3) 2 - "Literal value is stored in rI3. -Indexed, stores value of index in rI3." - 1) - -(mixal-add-operation-code - 'ENT4 'address-transfer "Enter rI4" (+ 48 4) 2 - "Literal value is stored in rI4. -Indexed, stores value of index in rI4." - 1) - -(mixal-add-operation-code - 'ENT5 'address-transfer "Enter rI5" (+ 48 5) 2 - "Literal value is stored in rI5. -Indexed, stores value of index in rI5." - 1) - -(mixal-add-operation-code - 'ENT6 'address-transfer "Enter rI6" (+ 48 6) 2 - "Literal value is stored in rI6. -Indexed, stores value of index in rI6." - 1) - -(mixal-add-operation-code - 'ENNA 'address-transfer "enter negative A" 48 3 - "Literal value is stored in rA with opposite sign. -Indexed, stores value of index in rA with opposite sign." - 1) - -(mixal-add-operation-code - 'ENNX 'address-transfer "enter negative X" 55 3 - "Literal value is stored in rX with opposite sign. -Indexed, stores value of index in rX with opposite sign." - 1) - -(mixal-add-operation-code - 'ENN1 'address-transfer "Enter negative rI1" (+ 48 1) 3 - "Literal value is stored in rI1 with opposite sign. -Indexed, stores value of index in rI1 with opposite sign." - 1) - -(mixal-add-operation-code - 'ENN2 'address-transfer "Enter negative rI2" (+ 48 2) 3 - "Literal value is stored in rI2 with opposite sign. -Indexed, stores value of index in rI2 with opposite sign." - 1) - -(mixal-add-operation-code - 'ENN3 'address-transfer "Enter negative rI3" (+ 48 3) 3 - "Literal value is stored in rI3 with opposite sign. -Indexed, stores value of index in rI3 with opposite sign." - 1) - -(mixal-add-operation-code - 'ENN4 'address-transfer "Enter negative rI4" (+ 48 4) 3 - "Literal value is stored in rI4 with opposite sign. -Indexed, stores value of index in rI4 with opposite sign." - 1) - -(mixal-add-operation-code - 'ENN5 'address-transfer "Enter negative rI5" (+ 48 5) 3 - "Literal value is stored in rI5 with opposite sign. -Indexed, stores value of index in rI5 with opposite sign." - 1) - -(mixal-add-operation-code - 'ENN6 'address-transfer "Enter negative rI6" (+ 48 6) 3 - "Literal value is stored in rI6 with opposite sign. -Indexed, stores value of index in rI6 with opposite sign." - 1) - -(mixal-add-operation-code - 'INCA 'address-transfer "increase A" 48 0 - "Increase register A with the literal value of M. -On overflow the overflow toggle is set." - 1) - -(mixal-add-operation-code - 'INCX 'address-transfer "increase X" 55 0 - "Increase register X with the literal value of M. -On overflow the overflow toggle is set." - 1) - -(mixal-add-operation-code - 'INC1 'address-transfer "increase I1" (+ 48 1) 0 - "Increase register I1 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'INC2 'address-transfer "increase I2" (+ 48 2) 0 - "Increase register I2 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'INC3 'address-transfer "increase I3" (+ 48 3) 0 - "Increase register I3 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'INC4 'address-transfer "increase I4" (+ 48 4) 0 - "Increase register I4 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'INC5 'address-transfer "increase I5" (+ 48 5) 0 - "Increase register I5 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'INC6 'address-transfer "increase I6" (+ 48 6) 0 - "Increase register I6 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'DECA 'address-transfer "decrease A" 48 1 - "Decrease register A with the literal value of M. -On overflow the overflow toggle is set." - 1) - -(mixal-add-operation-code - 'DECX 'address-transfer "decrease X" 55 1 - "Decrease register X with the literal value of M. -On overflow the overflow toggle is set." - 1) - -(mixal-add-operation-code - 'DEC1 'address-transfer "decrease I1" (+ 48 1) 1 - "Decrease register I1 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'DEC2 'address-transfer "decrease I2" (+ 48 2) 1 - "Decrease register I2 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'DEC3 'address-transfer "decrease I3" (+ 48 3) 1 - "Decrease register I3 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'DEC4 'address-transfer "decrease I4" (+ 48 4) 1 - "Decrease register I4 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'DEC5 'address-transfer "decrease I5" (+ 48 5) 1 - "Decrease register I5 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'DEC6 'address-transfer "decrease I6" (+ 48 6) 1 - "Decrease register I6 with the literal value of M. -The result is undefined when the result does not fit in -2 bytes." - 1) - -(mixal-add-operation-code - 'CMPA 'comparison "compare A" 56 'field - "Compare contents of A with contents of M. -The field specifier works on both fields. The comparison indicator -is set to LESS, EQUAL or GREATER depending on the outcome." - 2) - - -(mixal-add-operation-code - 'CMPX 'comparison "compare X" 63 'field - "Compare contents of rX with contents of M. -The field specifier works on both fields. The comparison indicator -is set to LESS, EQUAL or GREATER depending on the outcome." - 2) - - -(mixal-add-operation-code - 'CMP1 'comparison "compare I1" (+ 56 1) 'field - "Compare contents of rI1 with contents of M. -The field specifier works on both fields. The comparison indicator -is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 -have a value of 0." - 2) - - -(mixal-add-operation-code - 'CMP2 'comparison "compare I2" (+ 56 2) 'field - "Compare contents of rI2 with contents of M. -The field specifier works on both fields. The comparison indicator -is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 -have a value of 0." - 2) - - -(mixal-add-operation-code - 'CMP3 'comparison "compare I3" (+ 56 3) 'field - "Compare contents of rI3 with contents of M. -The field specifier works on both fields. The comparison indicator -is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 -have a value of 0." - 2) - - -(mixal-add-operation-code - 'CMP4 'comparison "compare I4" (+ 56 4) 'field - "Compare contents of rI4 with contents of M. -The field specifier works on both fields. The comparison indicator -is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 -have a value of 0." - 2) - - -(mixal-add-operation-code - 'CMP5 'comparison "compare I5" (+ 56 5) 'field - "Compare contents of rI5 with contents of M. -The field specifier works on both fields. The comparison indicator -is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 -have a value of 0." - 2) - - -(mixal-add-operation-code - 'CMP6 'comparison "compare I6" (+ 56 6) 'field - "Compare contents of rI6 with contents of M. -The field specifier works on both fields. The comparison indicator -is set to LESS, EQUAL or GREATER depending on the outcome. Bit 1,2 and 3 -have a value of 0." - 2) +;;; Font-locking: +(defvar mixal-font-lock-syntactic-keywords + ;; Normal comments start with a * in column 0 and end at end of line. + '(("^\\*" (0 '(11))) ;(string-to-syntax "<") == '(11) + ;; Every line can end with a comment which is placed after the operand. + ;; I assume here that mnemonics without operands can not have a comment. + ("^[[:alnum:]]*[ \t]+[[:alnum:]]+[ \t]+[^ \n\t]+[ \t]*\\([ \t]\\)[^\n \t]" + (1 '(11))))) -(mixal-add-operation-code - 'JMP 'jump "jump" 39 0 - "Unconditional jump. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - -(mixal-add-operation-code - 'JSJ 'jump "jump, save J" 39 1 - "Unconditional jump, but rJ is not modified." - 1) - -(mixal-add-operation-code - 'JOV 'jump "jump on overflow" 39 2 - "Jump if OV is set (and turn it off). -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - -(mixal-add-operation-code - 'JNOV 'jump "Jump on no overflow" 39 3 - "Jump if OV is not set (and turn it off). -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - -(mixal-add-operation-code - 'JL 'jump "Jump on less" 39 4 - "Jump if '[CM] = L'. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JE 'jump "Jump on equal" 39 5 - "Jump if '[CM] = E'. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JG 'jump "Jump on greater" 39 6 - "Jump if '[CM] = G'. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JGE 'jump "Jump on not less" 39 7 - "Jump if '[CM]' does not equal 'L'. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JNE 'jump "Jump on not equal" 39 8 - "Jump if '[CM]' does not equal 'E'. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JLE 'jump "Jump on not greater" 39 9 - "Jump if '[CM]' does not equal 'G'. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - -(mixal-add-operation-code - 'JAN 'jump "jump A negative" 40 0 - "Jump if the content of rA is negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JAZ 'jump "jump A zero" 40 1 - "Jump if the content of rA is zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JAP 'jump "jump A positive" 40 2 - "Jump if the content of rA is positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JANN 'jump "jump A non-negative" 40 3 - "Jump if the content of rA is non-negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JANZ 'jump "jump A non-zero" 40 4 - "Jump if the content of rA is non-zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JANP 'jump "jump A non-positive" 40 5 - "Jump if the content of rA is non-positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - -(mixal-add-operation-code - 'JXN 'jump "jump X negative" 47 0 - "Jump if the content of rX is negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JXZ 'jump "jump X zero" 47 1 - "Jump if the content of rX is zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JXP 'jump "jump X positive" 47 2 - "Jump if the content of rX is positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JXNN 'jump "jump X non-negative" 47 3 - "Jump if the content of rX is non-negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JXNZ 'jump "jump X non-zero" 47 4 - "Jump if the content of rX is non-zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'JXNP 'jump "jump X non-positive" 47 5 - "Jump if the content of rX is non-positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - -(mixal-add-operation-code - 'J1N 'jump "jump I1 negative" (+ 40 1) 0 - "Jump if the content of rI1 is negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J1Z 'jump "jump I1 zero" (+ 40 1) 1 - "Jump if the content of rI1 is zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J1P 'jump "jump I1 positive" (+ 40 1) 2 - "Jump if the content of rI1 is positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J1NN 'jump "jump I1 non-negative" (+ 40 1) 3 - "Jump if the content of rI1 is non-negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J1NZ 'jump "jump I1 non-zero" (+ 40 1) 4 - "Jump if the content of rI1 is non-zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J1NP 'jump "jump I1 non-positive" (+ 40 1) 5 - "Jump if the content of rI1 is non-positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - -(mixal-add-operation-code - 'J2N 'jump "jump I2 negative" (+ 40 1) 0 - "Jump if the content of rI2 is negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J2Z 'jump "jump I2 zero" (+ 40 1) 1 - "Jump if the content of rI2 is zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J2P 'jump "jump I2 positive" (+ 40 1) 2 - "Jump if the content of rI2 is positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J2NN 'jump "jump I2 non-negative" (+ 40 1) 3 - "Jump if the content of rI2 is non-negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J2NZ 'jump "jump I2 non-zero" (+ 40 1) 4 - "Jump if the content of rI2 is non-zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J2NP 'jump "jump I2 non-positive" (+ 40 1) 5 - "Jump if the content of rI2 is non-positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J3N 'jump "jump I3 negative" (+ 40 1) 0 - "Jump if the content of rI3 is negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J3Z 'jump "jump I3 zero" (+ 40 1) 1 - "Jump if the content of rI3 is zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J3P 'jump "jump I3 positive" (+ 40 1) 2 - "Jump if the content of rI3 is positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J3NN 'jump "jump I3 non-negative" (+ 40 1) 3 - "Jump if the content of rI3 is non-negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J3NZ 'jump "jump I3 non-zero" (+ 40 1) 4 - "Jump if the content of rI3 is non-zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J3NP 'jump "jump I3 non-positive" (+ 40 1) 5 - "Jump if the content of rI3 is non-positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J4N 'jump "jump I4 negative" (+ 40 1) 0 - "Jump if the content of rI4 is negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J4Z 'jump "jump I4 zero" (+ 40 1) 1 - "Jump if the content of rI4 is zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J4P 'jump "jump I4 positive" (+ 40 1) 2 - "Jump if the content of rI4 is positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J4NN 'jump "jump I4 non-negative" (+ 40 1) 3 - "Jump if the content of rI4 is non-negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J4NZ 'jump "jump I4 non-zero" (+ 40 1) 4 - "Jump if the content of rI4 is non-zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J4NP 'jump "jump I4 non-positive" (+ 40 1) 5 - "Jump if the content of rI4 is non-positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J5N 'jump "jump I5 negative" (+ 40 1) 0 - "Jump if the content of rI5 is negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J5Z 'jump "jump I5 zero" (+ 40 1) 1 - "Jump if the content of rI5 is zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J5P 'jump "jump I5 positive" (+ 40 1) 2 - "Jump if the content of rI5 is positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J5NN 'jump "jump I5 non-negative" (+ 40 1) 3 - "Jump if the content of rI5 is non-negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J5NZ 'jump "jump I5 non-zero" (+ 40 1) 4 - "Jump if the content of rI5 is non-zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J5NP 'jump "jump I5 non-positive" (+ 40 1) 5 - "Jump if the content of rI5 is non-positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J6N 'jump "jump I6 negative" (+ 40 1) 0 - "Jump if the content of rI6 is negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J6Z 'jump "jump I6 zero" (+ 40 1) 1 - "Jump if the content of rI6 is zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J6P 'jump "jump I6 positive" (+ 40 1) 2 - "Jump if the content of rI6 is positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J6NN 'jump "jump I6 non-negative" (+ 40 1) 3 - "Jump if the content of rI6 is non-negative. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J6NZ 'jump "jump I6 non-zero" (+ 40 1) 4 - "Jump if the content of rI6 is non-zero. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - - -(mixal-add-operation-code - 'J6NP 'jump "jump I6 non-positive" (+ 40 1) 5 - "Jump if the content of rI6 is non-positive. -Register J is set to the value of the next instruction that would have -been executed when there was no jump." - 1) - -(mixal-add-operation-code - 'SLA 'miscellaneous "shift left A" 6 0 - "Shift to A, M bytes left. -Hero's will be added to the right." - 2) - - -(mixal-add-operation-code - 'SRA 'miscellaneous "shift right A" 6 1 - "Shift to A, M bytes right. -Zeros will be added to the left." - 2) - - -(mixal-add-operation-code - 'SLAX 'miscellaneous "shift left AX" 6 2 - "Shift AX, M bytes left. -Zeros will be added to the right." - 2) - - - -(mixal-add-operation-code - 'SRAX 'miscellaneous "shift right AX" 6 3 - "Shift AX, M bytes right. -Zeros will be added to the left." - 2) - - -(mixal-add-operation-code - 'SLC 'miscellaneous "shift left AX circularly" 6 4 - "Shift AX, M bytes left circularly. -The bytes that fall off to the left will be added to the right." - 2) - - -(mixal-add-operation-code - 'SRC 'miscellaneous "shift right AX circularly" 6 4 - "Shift AX, M bytes right circularly. -The bytes that fall off to the right will be added to the left." - 2) - -(mixal-add-operation-code - 'MOVE 'miscellaneous "move" 7 'number - "Move MOD words from M to the location stored in rI1." - '(+ 1 (* 2 number))) - -(mixal-add-operation-code - 'NOP 'miscellaneous "no operation" 0 'ignored - "No operation, M and F are not used by the machine." - 1) - -(mixal-add-operation-code - 'HLT 'miscellaneous "halt" 5 2 - "Halt. -Stop instruction fetching." - 1) - -(mixal-add-operation-code - 'IN 'input-output "input" 36 'unit - "Transfer a block of words from the specified unit to memory. -The transfer starts at address M." - 1) - -(mixal-add-operation-code - 'OUT 'input-output "output" 37 'unit - "Transfer a block of words from memory. -The transfer starts at address M to the specified unit." - 1) - -(mixal-add-operation-code - 'IOC 'input-output "input-output control" 35 'unit - "Perform a control operation. -The control operation is given by M on the specified unit." - 1) - -(mixal-add-operation-code - 'JRED 'input-output "jump ready" 38 'unit - "Jump to M if the specified unit is ready." - 1) - - -(mixal-add-operation-code - 'JBUS 'input-output "jump busy" 34 'unit - "Jump to M if the specified unit is busy." - 1) - -(mixal-add-operation-code - 'NUM 'conversion "convert to numeric" 5 0 - "Convert rAX to its numerical value and store it in rA. -the register rAX is assumed to contain a character representation of -a number." - 10) - -(mixal-add-operation-code - 'CHAR 'conversion "convert to characters" 5 1 - "Convert the number stored in rA to a character representation. -The converted character representation is stored in rAX." - 10) +(defvar mixal-font-lock-keywords + `(("^\\([A-Z0-9a-z]+\\)" + (1 mixal-font-lock-label-face)) + (,(regexp-opt (mapcar (lambda (x) (symbol-name (car x))) + mixal-operation-codes-alist) 'words) + . mixal-font-lock-operation-code-face) + (,(regexp-opt mixal-assembly-pseudoinstructions 'words) + . mixal-font-lock-assembly-pseudoinstruction-face) + ("^[A-Z0-9a-z]*[ \t]+[A-ZO-9a-z]+[ \t]+\\(=.*=\\)" + (1 font-lock-constant-face))) + "Keyword highlighting specification for `mixal-mode'.") +;; (makunbound 'mixal-font-lock-keywords) (defvar mixal-describe-operation-code-history nil "History list for describe operation code.") -(defun mixal-describe-operation-code (&optional op-code) +(defun mixal-describe-operation-code (op-code) "Display the full documentation of OP-CODE." - (interactive) - ;; We like to provide completion and history, so do it ourself - ;; (interactive "?bla")? - (unless op-code + (interactive + (list (let* ((completion-ignore-case t) ;; we already have a list, but it is not in the right format ;; transform it to a valid table so completition can use it @@ -1277,15 +1118,16 @@ (cons (symbol-name (car elm)) nil)) mixal-operation-codes-alist)) ;; prompt is different depending on we are close to a valid op-code - (have-default (member (current-word) mixal-operation-codes)) + (have-default (assq (intern-soft (current-word)) + mixal-operation-codes-alist)) (prompt (concat "Describe operation code " (if have-default (concat "(default " (current-word) "): ") ": ")))) - ;; as the operation code to the user - (setq op-code (completing-read prompt table nil t nil - 'mixal-describe-operation-code-history - (current-word))))) + ;; As the operation code to the user. + (completing-read prompt table nil t nil + 'mixal-describe-operation-code-history + (current-word))))) ;; get the info on the op-code and output it to the help buffer (let ((op-code-help (assq (intern-soft op-code) mixal-operation-codes-alist))) (when op-code-help @@ -1317,8 +1159,11 @@ "Major mode for the mixal asm language. \\{mixal-mode-map}" (set (make-local-variable 'comment-start) "*") - (set (make-local-variable 'comment-start-skip) "*") - (set (make-local-variable 'font-lock-defaults) '(mixal-font-lock-keywords)) + (set (make-local-variable 'comment-start-skip) "^\\*[ \t]*") + (set (make-local-variable 'font-lock-defaults) + `(mixal-font-lock-keywords nil nil nil nil + (font-lock-syntactic-keywords . ,mixal-font-lock-syntactic-keywords) + (parse-sexp-lookup-properties . t))) ;; might add an indent function in the future ;; (set (make-local-variable 'indent-line-function) 'mixal-indent-line) (set (make-local-variable 'compile-command) (concat "mixasm "