# HG changeset patch # User Glenn Morris # Date 1189052022 0 # Node ID a81f341d1b4db41fb72f400ccf6cf279f0764238 # Parent 8d0bde55a205ac8efd5bcd9dfc5ebea7b067d03b Move to ../doc/lispref diff -r 8d0bde55a205 -r a81f341d1b4d lispref/os.texi --- a/lispref/os.texi Thu Sep 06 04:13:36 2007 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,2004 +0,0 @@ -@c -*-texinfo-*- -@c This is part of the GNU Emacs Lisp Reference Manual. -@c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2001, -@c 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. -@c See the file elisp.texi for copying conditions. -@setfilename ../info/os -@node System Interface, Antinews, Display, Top -@chapter Operating System Interface - - This chapter is about starting and getting out of Emacs, access to -values in the operating system environment, and terminal input, output, -and flow control. - - @xref{Building Emacs}, for related information. See also -@ref{Display}, for additional operating system status information -pertaining to the terminal and the screen. - -@menu -* Starting Up:: Customizing Emacs startup processing. -* Getting Out:: How exiting works (permanent or temporary). -* System Environment:: Distinguish the name and kind of system. -* User Identification:: Finding the name and user id of the user. -* Time of Day:: Getting the current time. -* Time Conversion:: Converting a time from numeric form - to calendrical data, and vice versa). -* Time Parsing:: Converting a time from numeric form to text - and vice versa. -* Processor Run Time:: Getting the run time used by Emacs. -* Time Calculations:: Adding, subtracting, comparing times, etc. -* Timers:: Setting a timer to call a function at a certain time. -* Idle Timers:: Setting a timer to call a function when Emacs has - been idle for a certain length of time. -* Terminal Input:: Accessing and recording terminal input. -* Terminal Output:: Controlling and recording terminal output. -* Sound Output:: Playing sounds on the computer's speaker. -* X11 Keysyms:: Operating on key symbols for X Windows -* Batch Mode:: Running Emacs without terminal interaction. -* Session Management:: Saving and restoring state with X Session Management. -@end menu - -@node Starting Up -@section Starting Up Emacs - - This section describes what Emacs does when it is started, and how you -can customize these actions. - -@menu -* Startup Summary:: Sequence of actions Emacs performs at startup. -* Init File:: Details on reading the init file (@file{.emacs}). -* Terminal-Specific:: How the terminal-specific Lisp file is read. -* Command-Line Arguments:: How command-line arguments are processed, - and how you can customize them. -@end menu - -@node Startup Summary -@subsection Summary: Sequence of Actions at Startup -@cindex initialization of Emacs -@cindex startup of Emacs -@cindex @file{startup.el} - - The order of operations performed (in @file{startup.el}) by Emacs when -it is started up is as follows: - -@enumerate -@item -It adds subdirectories to @code{load-path}, by running the file named -@file{subdirs.el} in each directory in the list. Normally this file -adds the directory's subdirectories to the list, and these will be -scanned in their turn. The files @file{subdirs.el} are normally -generated automatically by Emacs installation. - -@item -It sets the language environment and the terminal coding system, -if requested by environment variables such as @code{LANG}. - -@item -It loads the initialization library for the window system, if you are -using a window system. This library's name is -@file{term/@var{windowsystem}-win.el}. - -@item -It processes the initial options. (Some of them are handled -even earlier than this.) - -@item -It initializes the window frame and faces, if appropriate. - -@item -It runs the normal hook @code{before-init-hook}. - -@item -It loads the library @file{site-start} (if any), unless the option -@samp{-Q} (or @samp{--no-site-file}) was specified. The library's file -name is usually @file{site-start.el}. -@cindex @file{site-start.el} - -@item -It loads your init file (usually @file{~/.emacs}), unless the option -@samp{-q} (or @samp{--no-init-file}), @samp{-Q}, or @samp{--batch} was -specified on the command line. The @samp{-u} option can specify -another user whose home directory should be used instead of @file{~}. - -@item -It loads the library @file{default} (if any), unless -@code{inhibit-default-init} is non-@code{nil}. (This is not done in -@samp{-batch} mode, or if @samp{-Q} or @samp{-q} was specified on the -command line.) The library's file name is usually @file{default.el}. -@cindex @file{default.el} - -@item -It runs the normal hook @code{after-init-hook}. - -@item -It sets the major mode according to @code{initial-major-mode}, provided -the buffer @samp{*scratch*} is still current and still in Fundamental -mode. - -@item -It loads the terminal-specific Lisp file, if any, except when in batch -mode or using a window system. - -@item -It displays the initial echo area message, unless you have suppressed -that with @code{inhibit-startup-echo-area-message}. - -@item -It processes the action arguments from the command line. - -@item -It runs @code{emacs-startup-hook} and then @code{term-setup-hook}. - -@item -It calls @code{frame-notice-user-settings}, which modifies the -parameters of the selected frame according to whatever the init files -specify. - -@item -It runs @code{window-setup-hook}. @xref{Window Systems}. - -@item -It displays copyleft, nonwarranty, and basic use information, provided -the value of @code{inhibit-startup-message} is @code{nil}, you didn't -specify @samp{--no-splash} or @samp{-Q}. -@end enumerate - -@defopt inhibit-startup-message -This variable inhibits the initial startup messages (the nonwarranty, -etc.). If it is non-@code{nil}, then the messages are not printed. - -This variable exists so you can set it in your personal init file, once -you are familiar with the contents of the startup message. Do not set -this variable in the init file of a new user, or in a way that affects -more than one user, because that would prevent new users from receiving -the information they are supposed to see. -@end defopt - -@defopt inhibit-startup-echo-area-message -This variable controls the display of the startup echo area message. -You can suppress the startup echo area message by adding text with this -form to your init file: - -@example -(setq inhibit-startup-echo-area-message - "@var{your-login-name}") -@end example - -Emacs explicitly checks for an expression as shown above in your init -file; your login name must appear in the expression as a Lisp string -constant. Other methods of setting -@code{inhibit-startup-echo-area-message} to the same value do not -inhibit the startup message. - -This way, you can easily inhibit the message for yourself if you wish, -but thoughtless copying of your init file will not inhibit the message -for someone else. -@end defopt - -@node Init File -@subsection The Init File, @file{.emacs} -@cindex init file -@cindex @file{.emacs} - - When you start Emacs, it normally attempts to load your @dfn{init -file}, a file in your home directory. Its normal name is -@file{.emacs}, but you can also call it @file{.emacs.el}. -Alternatively, you can use a file named @file{init.el} in a -subdirectory @file{.emacs.d}. Whichever place you use, you can also -compile the file (@pxref{Byte Compilation}); then the actual file -loaded will be @file{.emacs.elc} or @file{init.elc}. - - The command-line switches @samp{-q}, @samp{-Q}, and @samp{-u} -control whether and where to find the init file; @samp{-q} (and the -stronger @samp{-Q}) says not to load an init file, while @samp{-u -@var{user}} says to load @var{user}'s init file instead of yours. -@xref{Entering Emacs,,, emacs, The GNU Emacs Manual}. If neither -option is specified, Emacs uses the @code{LOGNAME} environment -variable, or the @code{USER} (most systems) or @code{USERNAME} (MS -systems) variable, to find your home directory and thus your init -file; this way, even if you have su'd, Emacs still loads your own init -file. If those environment variables are absent, though, Emacs uses -your user-id to find your home directory. - -@cindex default init file - A site may have a @dfn{default init file}, which is the library -named @file{default.el}. Emacs finds the @file{default.el} file -through the standard search path for libraries (@pxref{How Programs Do -Loading}). The Emacs distribution does not come with this file; sites -may provide one for local customizations. If the default init file -exists, it is loaded whenever you start Emacs, except in batch mode or -if @samp{-q} (or @samp{-Q}) is specified. But your own personal init -file, if any, is loaded first; if it sets @code{inhibit-default-init} -to a non-@code{nil} value, then Emacs does not subsequently load the -@file{default.el} file. - - Another file for site-customization is @file{site-start.el}. Emacs -loads this @emph{before} the user's init file. You can inhibit the -loading of this file with the option @samp{--no-site-file}. - -@defvar site-run-file -This variable specifies the site-customization file to load before the -user's init file. Its normal value is @code{"site-start"}. The only -way you can change it with real effect is to do so before dumping -Emacs. -@end defvar - - @xref{Init Examples,, Init File Examples, emacs, The GNU Emacs Manual}, for -examples of how to make various commonly desired customizations in your -@file{.emacs} file. - -@defopt inhibit-default-init -This variable prevents Emacs from loading the default initialization -library file for your session of Emacs. If its value is non-@code{nil}, -then the default library is not loaded. The default value is -@code{nil}. -@end defopt - -@defvar before-init-hook -This normal hook is run, once, just before loading all the init files -(the user's init file, @file{default.el}, and/or @file{site-start.el}). -(The only way to change it with real effect is before dumping Emacs.) -@end defvar - -@defvar after-init-hook -This normal hook is run, once, just after loading all the init files -(the user's init file, @file{default.el}, and/or @file{site-start.el}), -before loading the terminal-specific library and processing the -command-line action arguments. -@end defvar - -@defvar emacs-startup-hook -This normal hook is run, once, just after handling the command line -arguments, just before @code{term-setup-hook}. -@end defvar - -@defvar user-init-file -This variable holds the absolute file name of the user's init file. If the -actual init file loaded is a compiled file, such as @file{.emacs.elc}, -the value refers to the corresponding source file. -@end defvar - -@defvar user-emacs-directory -This variable holds the name of the @file{.emacs.d} directory. It is -ordinarily @file{~/.emacs.d}, but differs on some platforms. -@end defvar - -@node Terminal-Specific -@subsection Terminal-Specific Initialization -@cindex terminal-specific initialization - - Each terminal type can have its own Lisp library that Emacs loads when -run on that type of terminal. The library's name is constructed by -concatenating the value of the variable @code{term-file-prefix} and the -terminal type (specified by the environment variable @code{TERM}). -Normally, @code{term-file-prefix} has the value -@code{"term/"}; changing this is not recommended. Emacs finds the file -in the normal manner, by searching the @code{load-path} directories, and -trying the @samp{.elc} and @samp{.el} suffixes. - -@cindex Termcap - The usual function of a terminal-specific library is to enable -special keys to send sequences that Emacs can recognize. It may also -need to set or add to @code{function-key-map} if the Termcap or -Terminfo entry does not specify all the terminal's function keys. -@xref{Terminal Input}. - - When the name of the terminal type contains a hyphen, and no library -is found whose name is identical to the terminal's name, Emacs strips -from the terminal's name the last hyphen and everything that follows -it, and tries again. This process is repeated until Emacs finds a -matching library or until there are no more hyphens in the name (the -latter means the terminal doesn't have any library specific to it). -Thus, for example, if there are no @samp{aaa-48} and @samp{aaa-30} -libraries, Emacs will try the same library @file{term/aaa.el} for -terminal types @samp{aaa-48} and @samp{aaa-30-rv}. If necessary, the -library can evaluate @code{(getenv "TERM")} to find the full name of -the terminal type.@refill - - Your init file can prevent the loading of the -terminal-specific library by setting the variable -@code{term-file-prefix} to @code{nil}. This feature is useful when -experimenting with your own peculiar customizations. - - You can also arrange to override some of the actions of the -terminal-specific library by setting the variable -@code{term-setup-hook}. This is a normal hook which Emacs runs using -@code{run-hooks} at the end of Emacs initialization, after loading both -your init file and any terminal-specific libraries. You can -use this variable to define initializations for terminals that do not -have their own libraries. @xref{Hooks}. - -@defvar term-file-prefix -@cindex @code{TERM} environment variable -If the @code{term-file-prefix} variable is non-@code{nil}, Emacs loads -a terminal-specific initialization file as follows: - -@example -(load (concat term-file-prefix (getenv "TERM"))) -@end example - -@noindent -You may set the @code{term-file-prefix} variable to @code{nil} in your -init file if you do not wish to load the -terminal-initialization file. To do this, put the following in -your init file: @code{(setq term-file-prefix nil)}. - -On MS-DOS, if the environment variable @code{TERM} is not set, Emacs -uses @samp{internal} as the terminal type. -@end defvar - -@defvar term-setup-hook -This variable is a normal hook that Emacs runs after loading your -init file, the default initialization file (if any) and the -terminal-specific Lisp file. - -You can use @code{term-setup-hook} to override the definitions made by a -terminal-specific file. -@end defvar - - See @code{window-setup-hook} in @ref{Window Systems}, for a related -feature. - -@node Command-Line Arguments -@subsection Command-Line Arguments -@cindex command-line arguments - - You can use command-line arguments to request various actions when you -start Emacs. Since you do not need to start Emacs more than once per -day, and will often leave your Emacs session running longer than that, -command-line arguments are hardly ever used. As a practical matter, it -is best to avoid making the habit of using them, since this habit would -encourage you to kill and restart Emacs unnecessarily often. These -options exist for two reasons: to be compatible with other editors (for -invocation by other programs) and to enable shell scripts to run -specific Lisp programs. - - This section describes how Emacs processes command-line arguments, -and how you can customize them. - -@ignore - (Note that some other editors require you to start afresh each time -you want to edit a file. With this kind of editor, you will probably -specify the file as a command-line argument. The recommended way to -use GNU Emacs is to start it only once, just after you log in, and do -all your editing in the same Emacs process. Each time you want to edit -a different file, you visit it with the existing Emacs, which eventually -comes to have many files in it ready for editing. Usually you do not -kill the Emacs until you are about to log out.) -@end ignore - -@defun command-line -This function parses the command line that Emacs was called with, -processes it, loads the user's init file and displays the -startup messages. -@end defun - -@defvar command-line-processed -The value of this variable is @code{t} once the command line has been -processed. - -If you redump Emacs by calling @code{dump-emacs}, you may wish to set -this variable to @code{nil} first in order to cause the new dumped Emacs -to process its new command-line arguments. -@end defvar - -@defvar command-switch-alist -@cindex switches on command line -@cindex options on command line -@cindex command-line options -The value of this variable is an alist of user-defined command-line -options and associated handler functions. This variable exists so you -can add elements to it. - -A @dfn{command-line option} is an argument on the command line, which -has the form: - -@example --@var{option} -@end example - -The elements of the @code{command-switch-alist} look like this: - -@example -(@var{option} . @var{handler-function}) -@end example - -The @sc{car}, @var{option}, is a string, the name of a command-line -option (not including the initial hyphen). The @var{handler-function} -is called to handle @var{option}, and receives the option name as its -sole argument. - -In some cases, the option is followed in the command line by an -argument. In these cases, the @var{handler-function} can find all the -remaining command-line arguments in the variable -@code{command-line-args-left}. (The entire list of command-line -arguments is in @code{command-line-args}.) - -The command-line arguments are parsed by the @code{command-line-1} -function in the @file{startup.el} file. See also @ref{Emacs -Invocation, , Command Line Arguments for Emacs Invocation, emacs, The -GNU Emacs Manual}. -@end defvar - -@defvar command-line-args -The value of this variable is the list of command-line arguments passed -to Emacs. -@end defvar - -@defvar command-line-functions -This variable's value is a list of functions for handling an -unrecognized command-line argument. Each time the next argument to be -processed has no special meaning, the functions in this list are called, -in order of appearance, until one of them returns a non-@code{nil} -value. - -These functions are called with no arguments. They can access the -command-line argument under consideration through the variable -@code{argi}, which is bound temporarily at this point. The remaining -arguments (not including the current one) are in the variable -@code{command-line-args-left}. - -When a function recognizes and processes the argument in @code{argi}, it -should return a non-@code{nil} value to say it has dealt with that -argument. If it has also dealt with some of the following arguments, it -can indicate that by deleting them from @code{command-line-args-left}. - -If all of these functions return @code{nil}, then the argument is used -as a file name to visit. -@end defvar - -@node Getting Out -@section Getting Out of Emacs -@cindex exiting Emacs - - There are two ways to get out of Emacs: you can kill the Emacs job, -which exits permanently, or you can suspend it, which permits you to -reenter the Emacs process later. As a practical matter, you seldom kill -Emacs---only when you are about to log out. Suspending is much more -common. - -@menu -* Killing Emacs:: Exiting Emacs irreversibly. -* Suspending Emacs:: Exiting Emacs reversibly. -@end menu - -@node Killing Emacs -@comment node-name, next, previous, up -@subsection Killing Emacs -@cindex killing Emacs - - Killing Emacs means ending the execution of the Emacs process. The -parent process normally resumes control. The low-level primitive for -killing Emacs is @code{kill-emacs}. - -@defun kill-emacs &optional exit-data -This function exits the Emacs process and kills it. - -If @var{exit-data} is an integer, then it is used as the exit status -of the Emacs process. (This is useful primarily in batch operation; see -@ref{Batch Mode}.) - -If @var{exit-data} is a string, its contents are stuffed into the -terminal input buffer so that the shell (or whatever program next reads -input) can read them. -@end defun - - All the information in the Emacs process, aside from files that have -been saved, is lost when the Emacs process is killed. Because killing -Emacs inadvertently can lose a lot of work, Emacs queries for -confirmation before actually terminating if you have buffers that need -saving or subprocesses that are running. This is done in the function -@code{save-buffers-kill-emacs}, the higher level function from which -@code{kill-emacs} is usually called. - -@defvar kill-emacs-query-functions -After asking the standard questions, @code{save-buffers-kill-emacs} -calls the functions in the list @code{kill-emacs-query-functions}, in -order of appearance, with no arguments. These functions can ask for -additional confirmation from the user. If any of them returns -@code{nil}, @code{save-buffers-kill-emacs} does not kill Emacs, and -does not run the remaining functions in this hook. Calling -@code{kill-emacs} directly does not run this hook. -@end defvar - -@defvar kill-emacs-hook -This variable is a normal hook; once @code{save-buffers-kill-emacs} is -finished with all file saving and confirmation, it calls -@code{kill-emacs} which runs the functions in this hook. -@code{kill-emacs} does not run this hook in batch mode. - -@code{kill-emacs} may be invoked directly (that is not via -@code{save-buffers-kill-emacs}) if the terminal is disconnected, or in -similar situations where interaction with the user is not possible. -Thus, if your hook needs to interact with the user, put it on -@code{kill-emacs-query-functions}; if it needs to run regardless of -how Emacs is killed, put it on @code{kill-emacs-hook}. -@end defvar - -@node Suspending Emacs -@subsection Suspending Emacs -@cindex suspending Emacs - - @dfn{Suspending Emacs} means stopping Emacs temporarily and returning -control to its superior process, which is usually the shell. This -allows you to resume editing later in the same Emacs process, with the -same buffers, the same kill ring, the same undo history, and so on. To -resume Emacs, use the appropriate command in the parent shell---most -likely @code{fg}. - - Some operating systems do not support suspension of jobs; on these -systems, ``suspension'' actually creates a new shell temporarily as a -subprocess of Emacs. Then you would exit the shell to return to Emacs. - - Suspension is not useful with window systems, because the Emacs job -may not have a parent that can resume it again, and in any case you can -give input to some other job such as a shell merely by moving to a -different window. Therefore, suspending is not allowed when Emacs is using -a window system (X, MS Windows, or Mac). - -@defun suspend-emacs &optional string -This function stops Emacs and returns control to the superior process. -If and when the superior process resumes Emacs, @code{suspend-emacs} -returns @code{nil} to its caller in Lisp. - -If @var{string} is non-@code{nil}, its characters are sent to be read -as terminal input by Emacs's superior shell. The characters in -@var{string} are not echoed by the superior shell; only the results -appear. - -Before suspending, @code{suspend-emacs} runs the normal hook -@code{suspend-hook}. - -After the user resumes Emacs, @code{suspend-emacs} runs the normal hook -@code{suspend-resume-hook}. @xref{Hooks}. - -The next redisplay after resumption will redraw the entire screen, -unless the variable @code{no-redraw-on-reenter} is non-@code{nil} -(@pxref{Refresh Screen}). - -In the following example, note that @samp{pwd} is not echoed after -Emacs is suspended. But it is read and executed by the shell. - -@smallexample -@group -(suspend-emacs) - @result{} nil -@end group - -@group -(add-hook 'suspend-hook - (function (lambda () - (or (y-or-n-p - "Really suspend? ") - (error "Suspend canceled"))))) - @result{} (lambda nil - (or (y-or-n-p "Really suspend? ") - (error "Suspend canceled"))) -@end group -@group -(add-hook 'suspend-resume-hook - (function (lambda () (message "Resumed!")))) - @result{} (lambda nil (message "Resumed!")) -@end group -@group -(suspend-emacs "pwd") - @result{} nil -@end group -@group ----------- Buffer: Minibuffer ---------- -Really suspend? @kbd{y} ----------- Buffer: Minibuffer ---------- -@end group - -@group ----------- Parent Shell ---------- -lewis@@slug[23] % /user/lewis/manual -lewis@@slug[24] % fg -@end group - -@group ----------- Echo Area ---------- -Resumed! -@end group -@end smallexample -@end defun - -@defvar suspend-hook -This variable is a normal hook that Emacs runs before suspending. -@end defvar - -@defvar suspend-resume-hook -This variable is a normal hook that Emacs runs on resuming -after a suspension. -@end defvar - -@node System Environment -@section Operating System Environment -@cindex operating system environment - - Emacs provides access to variables in the operating system environment -through various functions. These variables include the name of the -system, the user's @acronym{UID}, and so on. - -@defvar system-configuration -This variable holds the standard GNU configuration name for the -hardware/software configuration of your system, as a string. The -convenient way to test parts of this string is with -@code{string-match}. -@end defvar - -@cindex system type and name -@defvar system-type -The value of this variable is a symbol indicating the type of operating -system Emacs is operating on. Here is a table of the possible values: - -@table @code -@item alpha-vms -VMS on the Alpha. - -@item aix-v3 -AIX. - -@item berkeley-unix -Berkeley BSD. - -@item cygwin -Cygwin. - -@item dgux -Data General DGUX operating system. - -@item gnu -the GNU system (using the GNU kernel, which consists of the HURD and Mach). - -@item gnu/linux -A GNU/Linux system---that is, a variant GNU system, using the Linux -kernel. (These systems are the ones people often call ``Linux,'' but -actually Linux is just the kernel, not the whole system.) - -@item hpux -Hewlett-Packard HPUX operating system. - -@item irix -Silicon Graphics Irix system. - -@item ms-dos -Microsoft MS-DOS ``operating system.'' Emacs compiled with DJGPP for -MS-DOS binds @code{system-type} to @code{ms-dos} even when you run it on -MS-Windows. - -@item next-mach -NeXT Mach-based system. - -@item rtu -Masscomp RTU, UCB universe. - -@item unisoft-unix -UniSoft UniPlus. - -@item usg-unix-v -AT&T System V. - -@item vax-vms -VAX VMS. - -@item windows-nt -Microsoft windows NT. The same executable supports Windows 9X, but the -value of @code{system-type} is @code{windows-nt} in either case. - -@item xenix -SCO Xenix 386. -@end table - -We do not wish to add new symbols to make finer distinctions unless it -is absolutely necessary! In fact, we hope to eliminate some of these -alternatives in the future. We recommend using -@code{system-configuration} to distinguish between different operating -systems. -@end defvar - -@defun system-name -This function returns the name of the machine you are running on. -@example -(system-name) - @result{} "www.gnu.org" -@end example -@end defun - - The symbol @code{system-name} is a variable as well as a function. In -fact, the function returns whatever value the variable -@code{system-name} currently holds. Thus, you can set the variable -@code{system-name} in case Emacs is confused about the name of your -system. The variable is also useful for constructing frame titles -(@pxref{Frame Titles}). - -@defvar mail-host-address -If this variable is non-@code{nil}, it is used instead of -@code{system-name} for purposes of generating email addresses. For -example, it is used when constructing the default value of -@code{user-mail-address}. @xref{User Identification}. (Since this is -done when Emacs starts up, the value actually used is the one saved when -Emacs was dumped. @xref{Building Emacs}.) -@end defvar - -@deffn Command getenv var -@cindex environment variable access -This function returns the value of the environment variable @var{var}, -as a string. @var{var} should be a string. If @var{var} is undefined -in the environment, @code{getenv} returns @code{nil}. If returns -@samp{""} if @var{var} is set but null. Within Emacs, the environment -variable values are kept in the Lisp variable @code{process-environment}. - -@example -@group -(getenv "USER") - @result{} "lewis" -@end group - -@group -lewis@@slug[10] % printenv -PATH=.:/user/lewis/bin:/usr/bin:/usr/local/bin -USER=lewis -@end group -@group -TERM=ibmapa16 -SHELL=/bin/csh -HOME=/user/lewis -@end group -@end example -@end deffn - -@c Emacs 19 feature -@deffn Command setenv variable &optional value -This command sets the value of the environment variable named -@var{variable} to @var{value}. @var{variable} should be a string. -Internally, Emacs Lisp can handle any string. However, normally -@var{variable} should be a valid shell identifier, that is, a sequence -of letters, digits and underscores, starting with a letter or -underscore. Otherwise, errors may occur if subprocesses of Emacs try -to access the value of @var{variable}. If @var{value} is omitted or -@code{nil}, @code{setenv} removes @var{variable} from the environment. -Otherwise, @var{value} should be a string. - -@code{setenv} works by modifying @code{process-environment}; binding -that variable with @code{let} is also reasonable practice. - -@code{setenv} returns the new value of @var{variable}, or @code{nil} -if it removed @var{variable} from the environment. -@end deffn - -@defvar process-environment -This variable is a list of strings, each describing one environment -variable. The functions @code{getenv} and @code{setenv} work by means -of this variable. - -@smallexample -@group -process-environment -@result{} ("l=/usr/stanford/lib/gnuemacs/lisp" - "PATH=.:/user/lewis/bin:/usr/class:/nfsusr/local/bin" - "USER=lewis" -@end group -@group - "TERM=ibmapa16" - "SHELL=/bin/csh" - "HOME=/user/lewis") -@end group -@end smallexample - -If @code{process-environment} contains ``duplicate'' elements that -specify the same environment variable, the first of these elements -specifies the variable, and the other ``duplicates'' are ignored. -@end defvar - -@defvar path-separator -This variable holds a string which says which character separates -directories in a search path (as found in an environment variable). Its -value is @code{":"} for Unix and GNU systems, and @code{";"} for MS-DOS -and MS-Windows. -@end defvar - -@defun parse-colon-path path -This function takes a search path string such as would be the value of -the @code{PATH} environment variable, and splits it at the separators, -returning a list of directory names. @code{nil} in this list stands for -``use the current directory.'' Although the function's name says -``colon,'' it actually uses the value of @code{path-separator}. - -@example -(parse-colon-path ":/foo:/bar") - @result{} (nil "/foo/" "/bar/") -@end example -@end defun - -@defvar invocation-name -This variable holds the program name under which Emacs was invoked. The -value is a string, and does not include a directory name. -@end defvar - -@defvar invocation-directory -This variable holds the directory from which the Emacs executable was -invoked, or perhaps @code{nil} if that directory cannot be determined. -@end defvar - -@defvar installation-directory -If non-@code{nil}, this is a directory within which to look for the -@file{lib-src} and @file{etc} subdirectories. This is non-@code{nil} -when Emacs can't find those directories in their standard installed -locations, but can find them in a directory related somehow to the one -containing the Emacs executable. -@end defvar - -@defun load-average &optional use-float -This function returns the current 1-minute, 5-minute, and 15-minute load -averages, in a list. - -By default, the values are integers that are 100 times the system load -averages, which indicate the average number of processes trying to run. -If @var{use-float} is non-@code{nil}, then they are returned -as floating point numbers and without multiplying by 100. - -If it is impossible to obtain the load average, this function signals -an error. On some platforms, access to load averages requires -installing Emacs as setuid or setgid so that it can read kernel -information, and that usually isn't advisable. - -If the 1-minute load average is available, but the 5- or 15-minute -averages are not, this function returns a shortened list containing -the available averages. - -@example -@group -(load-average) - @result{} (169 48 36) -@end group -@group -(load-average t) - @result{} (1.69 0.48 0.36) -@end group - -@group -lewis@@rocky[5] % uptime - 11:55am up 1 day, 19:37, 3 users, - load average: 1.69, 0.48, 0.36 -@end group -@end example -@end defun - -@defun emacs-pid -This function returns the process @acronym{ID} of the Emacs process, -as an integer. -@end defun - -@defvar tty-erase-char -This variable holds the erase character that was selected -in the system's terminal driver, before Emacs was started. -The value is @code{nil} if Emacs is running under a window system. -@end defvar - -@defun setprv privilege-name &optional setp getprv -This function sets or resets a VMS privilege. (It does not exist on -other systems.) The first argument is the privilege name, as a string. -The second argument, @var{setp}, is @code{t} or @code{nil}, indicating -whether the privilege is to be turned on or off. Its default is -@code{nil}. The function returns @code{t} if successful, @code{nil} -otherwise. - -If the third argument, @var{getprv}, is non-@code{nil}, @code{setprv} -does not change the privilege, but returns @code{t} or @code{nil} -indicating whether the privilege is currently enabled. -@end defun - -@node User Identification -@section User Identification -@cindex user identification - -@defvar init-file-user -This variable says which user's init files should be used by -Emacs---or @code{nil} if none. @code{""} stands for the user who -originally logged in. The value reflects command-line options such as -@samp{-q} or @samp{-u @var{user}}. - -Lisp packages that load files of customizations, or any other sort of -user profile, should obey this variable in deciding where to find it. -They should load the profile of the user name found in this variable. -If @code{init-file-user} is @code{nil}, meaning that the @samp{-q} -option was used, then Lisp packages should not load any customization -files or user profile. -@end defvar - -@defvar user-mail-address -This holds the nominal email address of the user who is using Emacs. -Emacs normally sets this variable to a default value after reading your -init files, but not if you have already set it. So you can set the -variable to some other value in your init file if you do not -want to use the default value. -@end defvar - -@defun user-login-name &optional uid -If you don't specify @var{uid}, this function returns the name under -which the user is logged in. If the environment variable @code{LOGNAME} -is set, that value is used. Otherwise, if the environment variable -@code{USER} is set, that value is used. Otherwise, the value is based -on the effective @acronym{UID}, not the real @acronym{UID}. - -If you specify @var{uid}, the value is the user name that corresponds -to @var{uid} (which should be an integer), or @code{nil} if there is -no such user. - -@example -@group -(user-login-name) - @result{} "lewis" -@end group -@end example -@end defun - -@defun user-real-login-name -This function returns the user name corresponding to Emacs's real -@acronym{UID}. This ignores the effective @acronym{UID} and ignores the -environment variables @code{LOGNAME} and @code{USER}. -@end defun - -@defun user-full-name &optional uid -This function returns the full name of the logged-in user---or the value -of the environment variable @code{NAME}, if that is set. - -@c "Bil" is the correct spelling. -@example -@group -(user-full-name) - @result{} "Bil Lewis" -@end group -@end example - -If the Emacs job's user-id does not correspond to any known user (and -provided @code{NAME} is not set), the value is @code{"unknown"}. - -If @var{uid} is non-@code{nil}, then it should be a number (a user-id) -or a string (a login name). Then @code{user-full-name} returns the full -name corresponding to that user-id or login name. If you specify a -user-id or login name that isn't defined, it returns @code{nil}. -@end defun - -@vindex user-full-name -@vindex user-real-login-name -@vindex user-login-name - The symbols @code{user-login-name}, @code{user-real-login-name} and -@code{user-full-name} are variables as well as functions. The functions -return the same values that the variables hold. These variables allow -you to ``fake out'' Emacs by telling the functions what to return. The -variables are also useful for constructing frame titles (@pxref{Frame -Titles}). - -@defun user-real-uid -This function returns the real @acronym{UID} of the user. -The value may be a floating point number. - -@example -@group -(user-real-uid) - @result{} 19 -@end group -@end example -@end defun - -@defun user-uid -This function returns the effective @acronym{UID} of the user. -The value may be a floating point number. -@end defun - -@node Time of Day -@section Time of Day - - This section explains how to determine the current time and the time -zone. - -@defun current-time-string &optional time-value -This function returns the current time and date as a human-readable -string. The format of the string is unvarying; the number of characters -used for each part is always the same, so you can reliably use -@code{substring} to extract pieces of it. It is wise to count the -characters from the beginning of the string rather than from the end, as -additional information may some day be added at the end. - -@c Emacs 19 feature -The argument @var{time-value}, if given, specifies a time to format -instead of the current time. The argument should be a list whose first -two elements are integers. Thus, you can use times obtained from -@code{current-time} (see below) and from @code{file-attributes} -(@pxref{Definition of file-attributes}). @var{time-value} can also be -a cons of two integers, but this is considered obsolete. - -@example -@group -(current-time-string) - @result{} "Wed Oct 14 22:21:05 1987" -@end group -@end example -@end defun - -@c Emacs 19 feature -@defun current-time -This function returns the system's time value as a list of three -integers: @code{(@var{high} @var{low} @var{microsec})}. The integers -@var{high} and @var{low} combine to give the number of seconds since -0:00 January 1, 1970 UTC (Coordinated Universal Time), which is -@ifnottex -@var{high} * 2**16 + @var{low}. -@end ifnottex -@tex -$high*2^{16}+low$. -@end tex - -The third element, @var{microsec}, gives the microseconds since the -start of the current second (or 0 for systems that return time with -the resolution of only one second). - -The first two elements can be compared with file time values such as you -get with the function @code{file-attributes}. -@xref{Definition of file-attributes}. -@end defun - -@c Emacs 19 feature -@defun current-time-zone &optional time-value -This function returns a list describing the time zone that the user is -in. - -The value has the form @code{(@var{offset} @var{name})}. Here -@var{offset} is an integer giving the number of seconds ahead of UTC -(east of Greenwich). A negative value means west of Greenwich. The -second element, @var{name}, is a string giving the name of the time -zone. Both elements change when daylight saving time begins or ends; -if the user has specified a time zone that does not use a seasonal time -adjustment, then the value is constant through time. - -If the operating system doesn't supply all the information necessary to -compute the value, the unknown elements of the list are @code{nil}. - -The argument @var{time-value}, if given, specifies a time to analyze -instead of the current time. The argument should have the same form -as for @code{current-time-string} (see above). Thus, you can use -times obtained from @code{current-time} (see above) and from -@code{file-attributes}. @xref{Definition of file-attributes}. -@end defun - -@defun set-time-zone-rule tz -This function specifies the local time zone according to @var{tz}. If -@var{tz} is @code{nil}, that means to use an implementation-defined -default time zone. If @var{tz} is @code{t}, that means to use -Universal Time. Otherwise, @var{tz} should be a string specifying a -time zone rule. -@end defun - -@defun float-time &optional time-value -This function returns the current time as a floating-point number of -seconds since the epoch. The argument @var{time-value}, if given, -specifies a time to convert instead of the current time. The argument -should have the same form as for @code{current-time-string} (see -above). Thus, it accepts the output of @code{current-time} and -@code{file-attributes}. - -@emph{Warning}: Since the result is floating point, it may not be -exact. Do not use this function if precise time stamps are required. -@end defun - -@node Time Conversion -@section Time Conversion - - These functions convert time values (lists of two or three integers) -to calendrical information and vice versa. You can get time values -from the functions @code{current-time} (@pxref{Time of Day}) and -@code{file-attributes} (@pxref{Definition of file-attributes}). - - Many operating systems are limited to time values that contain 32 bits -of information; these systems typically handle only the times from -1901-12-13 20:45:52 UTC through 2038-01-19 03:14:07 UTC. However, some -operating systems have larger time values, and can represent times far -in the past or future. - - Time conversion functions always use the Gregorian calendar, even -for dates before the Gregorian calendar was introduced. Year numbers -count the number of years since the year 1 B.C., and do not skip zero -as traditional Gregorian years do; for example, the year number -@minus{}37 represents the Gregorian year 38 B.C@. - -@defun decode-time &optional time -This function converts a time value into calendrical information. If -you don't specify @var{time}, it decodes the current time. The return -value is a list of nine elements, as follows: - -@example -(@var{seconds} @var{minutes} @var{hour} @var{day} @var{month} @var{year} @var{dow} @var{dst} @var{zone}) -@end example - -Here is what the elements mean: - -@table @var -@item seconds -The number of seconds past the minute, as an integer between 0 and 59. -On some operating systems, this is 60 for leap seconds. -@item minutes -The number of minutes past the hour, as an integer between 0 and 59. -@item hour -The hour of the day, as an integer between 0 and 23. -@item day -The day of the month, as an integer between 1 and 31. -@item month -The month of the year, as an integer between 1 and 12. -@item year -The year, an integer typically greater than 1900. -@item dow -The day of week, as an integer between 0 and 6, where 0 stands for -Sunday. -@item dst -@code{t} if daylight saving time is effect, otherwise @code{nil}. -@item zone -An integer indicating the time zone, as the number of seconds east of -Greenwich. -@end table - -@strong{Common Lisp Note:} Common Lisp has different meanings for -@var{dow} and @var{zone}. -@end defun - -@defun encode-time seconds minutes hour day month year &optional zone -This function is the inverse of @code{decode-time}. It converts seven -items of calendrical data into a time value. For the meanings of the -arguments, see the table above under @code{decode-time}. - -Year numbers less than 100 are not treated specially. If you want them -to stand for years above 1900, or years above 2000, you must alter them -yourself before you call @code{encode-time}. - -The optional argument @var{zone} defaults to the current time zone and -its daylight saving time rules. If specified, it can be either a list -(as you would get from @code{current-time-zone}), a string as in the -@code{TZ} environment variable, @code{t} for Universal Time, or an -integer (as you would get from @code{decode-time}). The specified -zone is used without any further alteration for daylight saving time. - -If you pass more than seven arguments to @code{encode-time}, the first -six are used as @var{seconds} through @var{year}, the last argument is -used as @var{zone}, and the arguments in between are ignored. This -feature makes it possible to use the elements of a list returned by -@code{decode-time} as the arguments to @code{encode-time}, like this: - -@example -(apply 'encode-time (decode-time @dots{})) -@end example - -You can perform simple date arithmetic by using out-of-range values for -the @var{seconds}, @var{minutes}, @var{hour}, @var{day}, and @var{month} -arguments; for example, day 0 means the day preceding the given month. - -The operating system puts limits on the range of possible time values; -if you try to encode a time that is out of range, an error results. -For instance, years before 1970 do not work on some systems; -on others, years as early as 1901 do work. -@end defun - -@node Time Parsing -@section Parsing and Formatting Times - - These functions convert time values (lists of two or three integers) -to text in a string, and vice versa. - -@defun date-to-time string -This function parses the time-string @var{string} and returns the -corresponding time value. -@end defun - -@defun format-time-string format-string &optional time universal -This function converts @var{time} (or the current time, if @var{time} is -omitted) to a string according to @var{format-string}. The argument -@var{format-string} may contain @samp{%}-sequences which say to -substitute parts of the time. Here is a table of what the -@samp{%}-sequences mean: - -@table @samp -@item %a -This stands for the abbreviated name of the day of week. -@item %A -This stands for the full name of the day of week. -@item %b -This stands for the abbreviated name of the month. -@item %B -This stands for the full name of the month. -@item %c -This is a synonym for @samp{%x %X}. -@item %C -This has a locale-specific meaning. In the default locale (named C), it -is equivalent to @samp{%A, %B %e, %Y}. -@item %d -This stands for the day of month, zero-padded. -@item %D -This is a synonym for @samp{%m/%d/%y}. -@item %e -This stands for the day of month, blank-padded. -@item %h -This is a synonym for @samp{%b}. -@item %H -This stands for the hour (00-23). -@item %I -This stands for the hour (01-12). -@item %j -This stands for the day of the year (001-366). -@item %k -This stands for the hour (0-23), blank padded. -@item %l -This stands for the hour (1-12), blank padded. -@item %m -This stands for the month (01-12). -@item %M -This stands for the minute (00-59). -@item %n -This stands for a newline. -@item %p -This stands for @samp{AM} or @samp{PM}, as appropriate. -@item %r -This is a synonym for @samp{%I:%M:%S %p}. -@item %R -This is a synonym for @samp{%H:%M}. -@item %S -This stands for the seconds (00-59). -@item %t -This stands for a tab character. -@item %T -This is a synonym for @samp{%H:%M:%S}. -@item %U -This stands for the week of the year (01-52), assuming that weeks -start on Sunday. -@item %w -This stands for the numeric day of week (0-6). Sunday is day 0. -@item %W -This stands for the week of the year (01-52), assuming that weeks -start on Monday. -@item %x -This has a locale-specific meaning. In the default locale (named -@samp{C}), it is equivalent to @samp{%D}. -@item %X -This has a locale-specific meaning. In the default locale (named -@samp{C}), it is equivalent to @samp{%T}. -@item %y -This stands for the year without century (00-99). -@item %Y -This stands for the year with century. -@item %Z -This stands for the time zone abbreviation (e.g., @samp{EST}). -@item %z -This stands for the time zone numerical offset (e.g., @samp{-0500}). -@end table - -You can also specify the field width and type of padding for any of -these @samp{%}-sequences. This works as in @code{printf}: you write -the field width as digits in the middle of a @samp{%}-sequences. If you -start the field width with @samp{0}, it means to pad with zeros. If you -start the field width with @samp{_}, it means to pad with spaces. - -For example, @samp{%S} specifies the number of seconds since the minute; -@samp{%03S} means to pad this with zeros to 3 positions, @samp{%_3S} to -pad with spaces to 3 positions. Plain @samp{%3S} pads with zeros, -because that is how @samp{%S} normally pads to two positions. - -The characters @samp{E} and @samp{O} act as modifiers when used between -@samp{%} and one of the letters in the table above. @samp{E} specifies -using the current locale's ``alternative'' version of the date and time. -In a Japanese locale, for example, @code{%Ex} might yield a date format -based on the Japanese Emperors' reigns. @samp{E} is allowed in -@samp{%Ec}, @samp{%EC}, @samp{%Ex}, @samp{%EX}, @samp{%Ey}, and -@samp{%EY}. - -@samp{O} means to use the current locale's ``alternative'' -representation of numbers, instead of the ordinary decimal digits. This -is allowed with most letters, all the ones that output numbers. - -If @var{universal} is non-@code{nil}, that means to describe the time as -Universal Time; @code{nil} means describe it using what Emacs believes -is the local time zone (see @code{current-time-zone}). - -This function uses the C library function @code{strftime} -(@pxref{Formatting Calendar Time,,, libc, The GNU C Library Reference -Manual}) to do most of the work. In order to communicate with that -function, it first encodes its argument using the coding system -specified by @code{locale-coding-system} (@pxref{Locales}); after -@code{strftime} returns the resulting string, -@code{format-time-string} decodes the string using that same coding -system. -@end defun - -@defun seconds-to-time seconds -This function converts @var{seconds}, a floating point number of -seconds since the epoch, to a time value and returns that. To perform -the inverse conversion, use @code{float-time}. -@end defun - -@node Processor Run Time -@section Processor Run time -@cindex processor run time - -@defun get-internal-run-time -This function returns the processor run time used by Emacs as a list -of three integers: @code{(@var{high} @var{low} @var{microsec})}. The -integers @var{high} and @var{low} combine to give the number of -seconds, which is -@ifnottex -@var{high} * 2**16 + @var{low}. -@end ifnottex -@tex -$high*2^{16}+low$. -@end tex - -The third element, @var{microsec}, gives the microseconds (or 0 for -systems that return time with the resolution of only one second). - -If the system doesn't provide a way to determine the processor run -time, get-internal-run-time returns the same time as current-time. -@end defun - -@node Time Calculations -@section Time Calculations - - These functions perform calendrical computations using time values -(the kind of list that @code{current-time} returns). - -@defun time-less-p t1 t2 -This returns @code{t} if time value @var{t1} is less than time value -@var{t2}. -@end defun - -@defun time-subtract t1 t2 -This returns the time difference @var{t1} @minus{} @var{t2} between -two time values, in the same format as a time value. -@end defun - -@defun time-add t1 t2 -This returns the sum of two time values, one of which ought to -represent a time difference rather than a point in time. -Here is how to add a number of seconds to a time value: - -@example -(time-add @var{time} (seconds-to-time @var{seconds})) -@end example -@end defun - -@defun time-to-days time -This function returns the number of days between the beginning of year -1 and @var{time}. -@end defun - -@defun time-to-day-in-year time -This returns the day number within the year corresponding to @var{time}. -@end defun - -@defun date-leap-year-p year -This function returns @code{t} if @var{year} is a leap year. -@end defun - -@node Timers -@section Timers for Delayed Execution -@cindex timer - - You can set up a @dfn{timer} to call a function at a specified -future time or after a certain length of idleness. - - Emacs cannot run timers at any arbitrary point in a Lisp program; it -can run them only when Emacs could accept output from a subprocess: -namely, while waiting or inside certain primitive functions such as -@code{sit-for} or @code{read-event} which @emph{can} wait. Therefore, a -timer's execution may be delayed if Emacs is busy. However, the time of -execution is very precise if Emacs is idle. - - Emacs binds @code{inhibit-quit} to @code{t} before calling the timer -function, because quitting out of many timer functions can leave -things in an inconsistent state. This is normally unproblematical -because most timer functions don't do a lot of work. Indeed, for a -timer to call a function that takes substantial time to run is likely -to be annoying. If a timer function needs to allow quitting, it -should use @code{with-local-quit} (@pxref{Quitting}). For example, if -a timer function calls @code{accept-process-output} to receive output -from an external process, that call should be wrapped inside -@code{with-local-quit}, to ensure that @kbd{C-g} works if the external -process hangs. - - It is usually a bad idea for timer functions to alter buffer -contents. When they do, they usually should call @code{undo-boundary} -both before and after changing the buffer, to separate the timer's -changes from user commands' changes and prevent a single undo entry -from growing to be quite large. - - Timer functions should also avoid calling functions that cause Emacs -to wait, such as @code{sit-for} (@pxref{Waiting}). This can lead to -unpredictable effects, since other timers (or even the same timer) can -run while waiting. If a timer function needs to perform an action -after a certain time has elapsed, it can do this by scheduling a new -timer. - - If a timer function calls functions that can change the match data, -it should save and restore the match data. @xref{Saving Match Data}. - -@deffn Command run-at-time time repeat function &rest args -This sets up a timer that calls the function @var{function} with -arguments @var{args} at time @var{time}. If @var{repeat} is a number -(integer or floating point), the timer is scheduled to run again every -@var{repeat} seconds after @var{time}. If @var{repeat} is @code{nil}, -the timer runs only once. - -@var{time} may specify an absolute or a relative time. - -Absolute times may be specified using a string with a limited variety -of formats, and are taken to be times @emph{today}, even if already in -the past. The recognized forms are @samp{@var{xxxx}}, -@samp{@var{x}:@var{xx}}, or @samp{@var{xx}:@var{xx}} (military time), -and @samp{@var{xx}am}, @samp{@var{xx}AM}, @samp{@var{xx}pm}, -@samp{@var{xx}PM}, @samp{@var{xx}:@var{xx}am}, -@samp{@var{xx}:@var{xx}AM}, @samp{@var{xx}:@var{xx}pm}, or -@samp{@var{xx}:@var{xx}PM}. A period can be used instead of a colon -to separate the hour and minute parts. - -To specify a relative time as a string, use numbers followed by units. -For example: - -@table @samp -@item 1 min -denotes 1 minute from now. -@item 1 min 5 sec -denotes 65 seconds from now. -@item 1 min 2 sec 3 hour 4 day 5 week 6 fortnight 7 month 8 year -denotes exactly 103 months, 123 days, and 10862 seconds from now. -@end table - -For relative time values, Emacs considers a month to be exactly thirty -days, and a year to be exactly 365.25 days. - -Not all convenient formats are strings. If @var{time} is a number -(integer or floating point), that specifies a relative time measured in -seconds. The result of @code{encode-time} can also be used to specify -an absolute value for @var{time}. - -In most cases, @var{repeat} has no effect on when @emph{first} call -takes place---@var{time} alone specifies that. There is one exception: -if @var{time} is @code{t}, then the timer runs whenever the time is a -multiple of @var{repeat} seconds after the epoch. This is useful for -functions like @code{display-time}. - -The function @code{run-at-time} returns a timer value that identifies -the particular scheduled future action. You can use this value to call -@code{cancel-timer} (see below). -@end deffn - - A repeating timer nominally ought to run every @var{repeat} seconds, -but remember that any invocation of a timer can be late. Lateness of -one repetition has no effect on the scheduled time of the next -repetition. For instance, if Emacs is busy computing for long enough -to cover three scheduled repetitions of the timer, and then starts to -wait, it will immediately call the timer function three times in -immediate succession (presuming no other timers trigger before or -between them). If you want a timer to run again no less than @var{n} -seconds after the last invocation, don't use the @var{repeat} argument. -Instead, the timer function should explicitly reschedule the timer. - -@defvar timer-max-repeats -This variable's value specifies the maximum number of times to repeat -calling a timer function in a row, when many previously scheduled -calls were unavoidably delayed. -@end defvar - -@defmac with-timeout (seconds timeout-forms@dots{}) body@dots{} -Execute @var{body}, but give up after @var{seconds} seconds. If -@var{body} finishes before the time is up, @code{with-timeout} returns -the value of the last form in @var{body}. If, however, the execution of -@var{body} is cut short by the timeout, then @code{with-timeout} -executes all the @var{timeout-forms} and returns the value of the last -of them. - -This macro works by setting a timer to run after @var{seconds} seconds. If -@var{body} finishes before that time, it cancels the timer. If the -timer actually runs, it terminates execution of @var{body}, then -executes @var{timeout-forms}. - -Since timers can run within a Lisp program only when the program calls a -primitive that can wait, @code{with-timeout} cannot stop executing -@var{body} while it is in the midst of a computation---only when it -calls one of those primitives. So use @code{with-timeout} only with a -@var{body} that waits for input, not one that does a long computation. -@end defmac - - The function @code{y-or-n-p-with-timeout} provides a simple way to use -a timer to avoid waiting too long for an answer. @xref{Yes-or-No -Queries}. - -@defun cancel-timer timer -This cancels the requested action for @var{timer}, which should be a -timer---usually, one previously returned by @code{run-at-time} or -@code{run-with-idle-timer}. This cancels the effect of that call to -one of these functions; the arrival of the specified time will not -cause anything special to happen. -@end defun - -@node Idle Timers -@section Idle Timers - - Here is how to set up a timer that runs when Emacs is idle for a -certain length of time. Aside from how to set them up, idle timers -work just like ordinary timers. - -@deffn Command run-with-idle-timer secs repeat function &rest args -Set up a timer which runs when Emacs has been idle for @var{secs} -seconds. The value of @var{secs} may be an integer or a floating point -number; a value of the type returned by @code{current-idle-time} -is also allowed. - -If @var{repeat} is @code{nil}, the timer runs just once, the first time -Emacs remains idle for a long enough time. More often @var{repeat} is -non-@code{nil}, which means to run the timer @emph{each time} Emacs -remains idle for @var{secs} seconds. - -The function @code{run-with-idle-timer} returns a timer value which you -can use in calling @code{cancel-timer} (@pxref{Timers}). -@end deffn - -@cindex idleness - Emacs becomes ``idle'' when it starts waiting for user input, and it -remains idle until the user provides some input. If a timer is set for -five seconds of idleness, it runs approximately five seconds after Emacs -first becomes idle. Even if @var{repeat} is non-@code{nil}, this timer -will not run again as long as Emacs remains idle, because the duration -of idleness will continue to increase and will not go down to five -seconds again. - - Emacs can do various things while idle: garbage collect, autosave or -handle data from a subprocess. But these interludes during idleness do -not interfere with idle timers, because they do not reset the clock of -idleness to zero. An idle timer set for 600 seconds will run when ten -minutes have elapsed since the last user command was finished, even if -subprocess output has been accepted thousands of times within those ten -minutes, and even if there have been garbage collections and autosaves. - - When the user supplies input, Emacs becomes non-idle while executing the -input. Then it becomes idle again, and all the idle timers that are -set up to repeat will subsequently run another time, one by one. - -@c Emacs 19 feature -@defun current-idle-time -This function returns the length of time Emacs has been idle, as a -list of three integers: @code{(@var{high} @var{low} @var{microsec})}. -The integers @var{high} and @var{low} combine to give the number of -seconds of idleness, which is -@ifnottex -@var{high} * 2**16 + @var{low}. -@end ifnottex -@tex -$high*2^{16}+low$. -@end tex - -The third element, @var{microsec}, gives the microseconds since the -start of the current second (or 0 for systems that return time with -the resolution of only one second). - -The main use of this function is when an idle timer function wants to -``take a break'' for a while. It can set up another idle timer to -call the same function again, after a few seconds more idleness. -Here's an example: - -@smallexample -(defvar resume-timer nil - "Timer that `timer-function' used to reschedule itself, or nil.") - -(defun timer-function () - ;; @r{If the user types a command while @code{resume-timer}} - ;; @r{is active, the next time this function is called from} - ;; @r{its main idle timer, deactivate @code{resume-timer}.} - (when resume-timer - (cancel-timer resume-timer)) - ...@var{do the work for a while}... - (when @var{taking-a-break} - (setq resume-timer - (run-with-idle-timer - ;; Compute an idle time @var{break-length} - ;; more than the current value. - (time-add (current-idle-time) - (seconds-to-time @var{break-length})) - nil - 'timer-function)))) -@end smallexample -@end defun - - Some idle timer functions in user Lisp packages have a loop that -does a certain amount of processing each time around, and exits when -@code{(input-pending-p)} is non-@code{nil}. That approach seems very -natural but has two problems: - -@itemize -@item -It blocks out all process output (since Emacs accepts process output -only while waiting). - -@item -It blocks out any idle timers that ought to run during that time. -@end itemize - -@noindent -To avoid these problems, don't use that technique. Instead, write -such idle timers to reschedule themselves after a brief pause, using -the method in the @code{timer-function} example above. - -@node Terminal Input -@section Terminal Input -@cindex terminal input - - This section describes functions and variables for recording or -manipulating terminal input. See @ref{Display}, for related -functions. - -@menu -* Input Modes:: Options for how input is processed. -* Recording Input:: Saving histories of recent or all input events. -@end menu - -@node Input Modes -@subsection Input Modes -@cindex input modes -@cindex terminal input modes - -@defun set-input-mode interrupt flow meta &optional quit-char -This function sets the mode for reading keyboard input. If -@var{interrupt} is non-null, then Emacs uses input interrupts. If it is -@code{nil}, then it uses @sc{cbreak} mode. The default setting is -system-dependent. Some systems always use @sc{cbreak} mode regardless -of what is specified. - -When Emacs communicates directly with X, it ignores this argument and -uses interrupts if that is the way it knows how to communicate. - -If @var{flow} is non-@code{nil}, then Emacs uses @sc{xon/xoff} -(@kbd{C-q}, @kbd{C-s}) flow control for output to the terminal. This -has no effect except in @sc{cbreak} mode. - -@c Emacs 19 feature -The argument @var{meta} controls support for input character codes -above 127. If @var{meta} is @code{t}, Emacs converts characters with -the 8th bit set into Meta characters. If @var{meta} is @code{nil}, -Emacs disregards the 8th bit; this is necessary when the terminal uses -it as a parity bit. If @var{meta} is neither @code{t} nor @code{nil}, -Emacs uses all 8 bits of input unchanged. This is good for terminals -that use 8-bit character sets. - -@c Emacs 19 feature -If @var{quit-char} is non-@code{nil}, it specifies the character to -use for quitting. Normally this character is @kbd{C-g}. -@xref{Quitting}. -@end defun - -The @code{current-input-mode} function returns the input mode settings -Emacs is currently using. - -@c Emacs 19 feature -@defun current-input-mode -This function returns the current mode for reading keyboard input. It -returns a list, corresponding to the arguments of @code{set-input-mode}, -of the form @code{(@var{interrupt} @var{flow} @var{meta} @var{quit})} in -which: -@table @var -@item interrupt -is non-@code{nil} when Emacs is using interrupt-driven input. If -@code{nil}, Emacs is using @sc{cbreak} mode. -@item flow -is non-@code{nil} if Emacs uses @sc{xon/xoff} (@kbd{C-q}, @kbd{C-s}) -flow control for output to the terminal. This value is meaningful only -when @var{interrupt} is @code{nil}. -@item meta -is @code{t} if Emacs treats the eighth bit of input characters as -the meta bit; @code{nil} means Emacs clears the eighth bit of every -input character; any other value means Emacs uses all eight bits as the -basic character code. -@item quit -is the character Emacs currently uses for quitting, usually @kbd{C-g}. -@end table -@end defun - -@node Recording Input -@subsection Recording Input -@cindex recording input - -@defun recent-keys -This function returns a vector containing the last 300 input events from -the keyboard or mouse. All input events are included, whether or not -they were used as parts of key sequences. Thus, you always get the last -100 input events, not counting events generated by keyboard macros. -(These are excluded because they are less interesting for debugging; it -should be enough to see the events that invoked the macros.) - -A call to @code{clear-this-command-keys} (@pxref{Command Loop Info}) -causes this function to return an empty vector immediately afterward. -@end defun - -@deffn Command open-dribble-file filename -@cindex dribble file -This function opens a @dfn{dribble file} named @var{filename}. When a -dribble file is open, each input event from the keyboard or mouse (but -not those from keyboard macros) is written in that file. A -non-character event is expressed using its printed representation -surrounded by @samp{<@dots{}>}. - -You close the dribble file by calling this function with an argument -of @code{nil}. - -This function is normally used to record the input necessary to -trigger an Emacs bug, for the sake of a bug report. - -@example -@group -(open-dribble-file "~/dribble") - @result{} nil -@end group -@end example -@end deffn - - See also the @code{open-termscript} function (@pxref{Terminal Output}). - -@node Terminal Output -@section Terminal Output -@cindex terminal output - - The terminal output functions send output to a text terminal, or keep -track of output sent to the terminal. The variable @code{baud-rate} -tells you what Emacs thinks is the output speed of the terminal. - -@defvar baud-rate -This variable's value is the output speed of the terminal, as far as -Emacs knows. Setting this variable does not change the speed of actual -data transmission, but the value is used for calculations such as -padding. - - It also affects decisions about whether to scroll part of the -screen or repaint on text terminals. @xref{Forcing Redisplay}, -for the corresponding functionality on graphical terminals. - -The value is measured in baud. -@end defvar - - If you are running across a network, and different parts of the -network work at different baud rates, the value returned by Emacs may be -different from the value used by your local terminal. Some network -protocols communicate the local terminal speed to the remote machine, so -that Emacs and other programs can get the proper value, but others do -not. If Emacs has the wrong value, it makes decisions that are less -than optimal. To fix the problem, set @code{baud-rate}. - -@defun baud-rate -This obsolete function returns the value of the variable -@code{baud-rate}. -@end defun - -@defun send-string-to-terminal string -This function sends @var{string} to the terminal without alteration. -Control characters in @var{string} have terminal-dependent effects. -This function operates only on text terminals. - -One use of this function is to define function keys on terminals that -have downloadable function key definitions. For example, this is how (on -certain terminals) to define function key 4 to move forward four -characters (by transmitting the characters @kbd{C-u C-f} to the -computer): - -@example -@group -(send-string-to-terminal "\eF4\^U\^F") - @result{} nil -@end group -@end example -@end defun - -@deffn Command open-termscript filename -@cindex termscript file -This function is used to open a @dfn{termscript file} that will record -all the characters sent by Emacs to the terminal. It returns -@code{nil}. Termscript files are useful for investigating problems -where Emacs garbles the screen, problems that are due to incorrect -Termcap entries or to undesirable settings of terminal options more -often than to actual Emacs bugs. Once you are certain which characters -were actually output, you can determine reliably whether they correspond -to the Termcap specifications in use. - -You close the termscript file by calling this function with an -argument of @code{nil}. - -See also @code{open-dribble-file} in @ref{Recording Input}. - -@example -@group -(open-termscript "../junk/termscript") - @result{} nil -@end group -@end example -@end deffn - -@node Sound Output -@section Sound Output -@cindex sound - - To play sound using Emacs, use the function @code{play-sound}. Only -certain systems are supported; if you call @code{play-sound} on a system -which cannot really do the job, it gives an error. Emacs version 20 and -earlier did not support sound at all. - - The sound must be stored as a file in RIFF-WAVE format (@samp{.wav}) -or Sun Audio format (@samp{.au}). - -@defun play-sound sound -This function plays a specified sound. The argument, @var{sound}, has -the form @code{(sound @var{properties}...)}, where the @var{properties} -consist of alternating keywords (particular symbols recognized -specially) and values corresponding to them. - -Here is a table of the keywords that are currently meaningful in -@var{sound}, and their meanings: - -@table @code -@item :file @var{file} -This specifies the file containing the sound to play. -If the file name is not absolute, it is expanded against -the directory @code{data-directory}. - -@item :data @var{data} -This specifies the sound to play without need to refer to a file. The -value, @var{data}, should be a string containing the same bytes as a -sound file. We recommend using a unibyte string. - -@item :volume @var{volume} -This specifies how loud to play the sound. It should be a number in the -range of 0 to 1. The default is to use whatever volume has been -specified before. - -@item :device @var{device} -This specifies the system device on which to play the sound, as a -string. The default device is system-dependent. -@end table - -Before actually playing the sound, @code{play-sound} -calls the functions in the list @code{play-sound-functions}. -Each function is called with one argument, @var{sound}. -@end defun - -@defun play-sound-file file &optional volume device -This function is an alternative interface to playing a sound @var{file} -specifying an optional @var{volume} and @var{device}. -@end defun - -@defvar play-sound-functions -A list of functions to be called before playing a sound. Each function -is called with one argument, a property list that describes the sound. -@end defvar - -@node X11 Keysyms -@section Operating on X11 Keysyms -@cindex X11 keysyms - -To define system-specific X11 keysyms, set the variable -@code{system-key-alist}. - -@defvar system-key-alist -This variable's value should be an alist with one element for each -system-specific keysym. Each element has the form @code{(@var{code} -. @var{symbol})}, where @var{code} is the numeric keysym code (not -including the ``vendor specific'' bit, -@ifnottex --2**28), -@end ifnottex -@tex -$-2^{28}$), -@end tex -and @var{symbol} is the name for the function key. - -For example @code{(168 . mute-acute)} defines a system-specific key (used -by HP X servers) whose numeric code is -@ifnottex --2**28 -@end ifnottex -@tex -$-2^{28}$ -@end tex -+ 168. - -It is not crucial to exclude from the alist the keysyms of other X -servers; those do no harm, as long as they don't conflict with the ones -used by the X server actually in use. - -The variable is always local to the current terminal, and cannot be -buffer-local. @xref{Multiple Displays}. -@end defvar - -You can specify which keysyms Emacs should use for the Meta, Alt, Hyper, and Super modifiers by setting these variables: - -@defvar x-alt-keysym -@defvarx x-meta-keysym -@defvarx x-hyper-keysym -@defvarx x-super-keysym -The name of the keysym that should stand for the Alt modifier -(respectively, for Meta, Hyper, and Super). For example, here is -how to swap the Meta and Alt modifiers within Emacs: -@lisp -(setq x-alt-keysym 'meta) -(setq x-meta-keysym 'alt) -@end lisp -@end defvar - -@node Batch Mode -@section Batch Mode -@cindex batch mode - - The command-line option @samp{-batch} causes Emacs to run -noninteractively. In this mode, Emacs does not read commands from the -terminal, it does not alter the terminal modes, and it does not expect -to be outputting to an erasable screen. The idea is that you specify -Lisp programs to run; when they are finished, Emacs should exit. The -way to specify the programs to run is with @samp{-l @var{file}}, which -loads the library named @var{file}, or @samp{-f @var{function}}, which -calls @var{function} with no arguments, or @samp{--eval @var{form}}. - - Any Lisp program output that would normally go to the echo area, -either using @code{message}, or using @code{prin1}, etc., with @code{t} -as the stream, goes instead to Emacs's standard error descriptor when -in batch mode. Similarly, input that would normally come from the -minibuffer is read from the standard input descriptor. -Thus, Emacs behaves much like a noninteractive -application program. (The echo area output that Emacs itself normally -generates, such as command echoing, is suppressed entirely.) - -@defvar noninteractive -This variable is non-@code{nil} when Emacs is running in batch mode. -@end defvar - -@node Session Management -@section Session Management -@cindex session manager - -Emacs supports the X Session Management Protocol for suspension and -restart of applications. In the X Window System, a program called the -@dfn{session manager} has the responsibility to keep track of the -applications that are running. During shutdown, the session manager -asks applications to save their state, and delays the actual shutdown -until they respond. An application can also cancel the shutdown. - -When the session manager restarts a suspended session, it directs -these applications to individually reload their saved state. It does -this by specifying a special command-line argument that says what -saved session to restore. For Emacs, this argument is @samp{--smid -@var{session}}. - -@defvar emacs-save-session-functions -Emacs supports saving state by using a hook called -@code{emacs-save-session-functions}. Each function in this hook is -called when the session manager tells Emacs that the window system is -shutting down. The functions are called with no arguments and with the -current buffer set to a temporary buffer. Each function can use -@code{insert} to add Lisp code to this buffer. At the end, Emacs -saves the buffer in a file that a subsequent Emacs invocation will -load in order to restart the saved session. - -If a function in @code{emacs-save-session-functions} returns -non-@code{nil}, Emacs tells the session manager to cancel the -shutdown. -@end defvar - -Here is an example that just inserts some text into @samp{*scratch*} when -Emacs is restarted by the session manager. - -@example -@group -(add-hook 'emacs-save-session-functions 'save-yourself-test) -@end group - -@group -(defun save-yourself-test () - (insert "(save-excursion - (switch-to-buffer \"*scratch*\") - (insert \"I am restored\"))") - nil) -@end group -@end example - -@ignore - arch-tag: 8378814a-30d7-467c-9615-74a80b9988a7 -@end ignore