# HG changeset patch # User Glenn Morris # Date 1189054124 0 # Node ID aed95b18afb23691054399c41d5e7c01f3a4687e # Parent 63d20bc189198187c68e6a9e7dd619f82e13bc89 Move here from ../../man diff -r 63d20bc18919 -r aed95b18afb2 doc/emacs/text.texi --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/doc/emacs/text.texi Thu Sep 06 04:48:44 2007 +0000 @@ -0,0 +1,2901 @@ +@c This is part of the Emacs manual. +@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2000, 2001, +@c 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. +@c See file emacs.texi for copying conditions. +@node Text, Programs, Indentation, Top +@chapter Commands for Human Languages +@cindex text +@cindex manipulating text + + The term @dfn{text} has two widespread meanings in our area of the +computer field. One is data that is a sequence of characters. Any file +that you edit with Emacs is text, in this sense of the word. The other +meaning is more restrictive: a sequence of characters in a human language +for humans to read (possibly after processing by a text formatter), as +opposed to a program or binary data. This chapter is concerned with +editing text in the narrower sense. + + Human languages have syntactic/stylistic conventions that can be +supported or used to advantage by editor commands: conventions involving +words, sentences, paragraphs, and capital letters. This chapter +describes Emacs commands for all of these things. There are also +commands for @dfn{filling}, which means rearranging the lines of a +paragraph to be approximately equal in length. The commands for moving +over and killing words, sentences and paragraphs, while intended +primarily for editing text, are also often useful for editing programs. + + Emacs has several major modes for editing human-language text. If the +file contains text pure and simple, use Text mode, which customizes +Emacs in small ways for the syntactic conventions of text. Outline mode +provides special commands for operating on text with an outline +structure. +@iftex +@xref{Outline Mode}. +@end iftex + + For text which contains embedded commands for text formatters, Emacs +has other major modes, each for a particular formatter. Thus, for +input to @TeX{}, you would use @TeX{} +@iftex +mode (@pxref{TeX Mode,,@TeX{} Mode}). +@end iftex +@ifnottex +mode. +@end ifnottex +For input to groff or nroff, use Nroff mode. + + Instead of using a text formatter, you can edit formatted text in +WYSIWYG style (``what you see is what you get''), with Enriched mode. +Then the formatting appears on the screen in Emacs while you edit. +@iftex +@xref{Formatted Text}. +@end iftex + +@cindex ASCII art + If you need to edit pictures made out of text characters (commonly +referred to as ``ASCII art''), use @kbd{M-x edit-picture} to enter +Picture mode, a special major mode for editing such pictures. +@iftex +@xref{Picture Mode,,, emacs-xtra, Specialized Emacs Features}. +@end iftex +@ifnottex +@xref{Picture Mode}. +@end ifnottex + + +@cindex skeletons +@cindex templates +@cindex autotyping +@cindex automatic typing + The ``automatic typing'' features may be useful when writing text. +@inforef{Top,, autotype}. + +@menu +* Words:: Moving over and killing words. +* Sentences:: Moving over and killing sentences. +* Paragraphs:: Moving over paragraphs. +* Pages:: Moving over pages. +* Filling:: Filling or justifying text. +* Case:: Changing the case of text. +* Text Mode:: The major modes for editing text files. +* Outline Mode:: Editing outlines. +* TeX Mode:: Editing input to the formatter TeX. +* HTML Mode:: Editing HTML, SGML, and XML files. +* Nroff Mode:: Editing input to the formatter nroff. +* Formatted Text:: Editing formatted text directly in WYSIWYG fashion. +* Text Based Tables:: Editing text-based tables in WYSIWYG fashion. +@end menu + +@node Words +@section Words +@cindex words +@cindex Meta commands and words + + Emacs has commands for moving over or operating on words. By convention, +the keys for them are all Meta characters. + +@table @kbd +@item M-f +Move forward over a word (@code{forward-word}). +@item M-b +Move backward over a word (@code{backward-word}). +@item M-d +Kill up to the end of a word (@code{kill-word}). +@item M-@key{DEL} +Kill back to the beginning of a word (@code{backward-kill-word}). +@item M-@@ +Mark the end of the next word (@code{mark-word}). +@item M-t +Transpose two words or drag a word across others +(@code{transpose-words}). +@end table + + Notice how these keys form a series that parallels the character-based +@kbd{C-f}, @kbd{C-b}, @kbd{C-d}, @key{DEL} and @kbd{C-t}. @kbd{M-@@} is +cognate to @kbd{C-@@}, which is an alias for @kbd{C-@key{SPC}}. + +@kindex M-f +@kindex M-b +@findex forward-word +@findex backward-word + The commands @kbd{M-f} (@code{forward-word}) and @kbd{M-b} +(@code{backward-word}) move forward and backward over words. These +Meta characters are thus analogous to the corresponding control +characters, @kbd{C-f} and @kbd{C-b}, which move over single characters +in the text. The analogy extends to numeric arguments, which serve as +repeat counts. @kbd{M-f} with a negative argument moves backward, and +@kbd{M-b} with a negative argument moves forward. Forward motion +stops right after the last letter of the word, while backward motion +stops right before the first letter. + +@kindex M-d +@findex kill-word + @kbd{M-d} (@code{kill-word}) kills the word after point. To be +precise, it kills everything from point to the place @kbd{M-f} would +move to. Thus, if point is in the middle of a word, @kbd{M-d} kills +just the part after point. If some punctuation comes between point and the +next word, it is killed along with the word. (If you wish to kill only the +next word but not the punctuation before it, simply do @kbd{M-f} to get +the end, and kill the word backwards with @kbd{M-@key{DEL}}.) +@kbd{M-d} takes arguments just like @kbd{M-f}. + +@findex backward-kill-word +@kindex M-DEL + @kbd{M-@key{DEL}} (@code{backward-kill-word}) kills the word before +point. It kills everything from point back to where @kbd{M-b} would +move to. For instance, if point is after the space in @w{@samp{FOO, +BAR}}, it kills @w{@samp{FOO, }}. If you wish to kill just +@samp{FOO}, and not the comma and the space, use @kbd{M-b M-d} instead +of @kbd{M-@key{DEL}}. + +@c Don't index M-t and transpose-words here, they are indexed in +@c fixit.texi, in the node "Transpose". +@c @kindex M-t +@c @findex transpose-words + @kbd{M-t} (@code{transpose-words}) exchanges the word before or +containing point with the following word. The delimiter characters between +the words do not move. For example, @w{@samp{FOO, BAR}} transposes into +@w{@samp{BAR, FOO}} rather than @samp{@w{BAR FOO,}}. @xref{Transpose}, for +more on transposition. + +@kindex M-@@ +@findex mark-word + To operate on the next @var{n} words with an operation which applies +between point and mark, you can either set the mark at point and then move +over the words, or you can use the command @kbd{M-@@} (@code{mark-word}) +which does not move point, but sets the mark where @kbd{M-f} would move +to. @kbd{M-@@} accepts a numeric argument that says how many words to +scan for the place to put the mark. In Transient Mark mode, this command +activates the mark. + + The word commands' understanding of word boundaries is controlled +by the syntax table. Any character can, for example, be declared to +be a word delimiter. @xref{Syntax}. + +@node Sentences +@section Sentences +@cindex sentences +@cindex manipulating sentences + + The Emacs commands for manipulating sentences and paragraphs are mostly +on Meta keys, so as to be like the word-handling commands. + +@table @kbd +@item M-a +Move back to the beginning of the sentence (@code{backward-sentence}). +@item M-e +Move forward to the end of the sentence (@code{forward-sentence}). +@item M-k +Kill forward to the end of the sentence (@code{kill-sentence}). +@item C-x @key{DEL} +Kill back to the beginning of the sentence (@code{backward-kill-sentence}). +@end table + +@kindex M-a +@kindex M-e +@findex backward-sentence +@findex forward-sentence + The commands @kbd{M-a} and @kbd{M-e} (@code{backward-sentence} and +@code{forward-sentence}) move to the beginning and end of the current +sentence, respectively. They were chosen to resemble @kbd{C-a} and +@kbd{C-e}, which move to the beginning and end of a line. Unlike +them, @kbd{M-a} and @kbd{M-e} move over successive sentences if +repeated. + + Moving backward over a sentence places point just before the first +character of the sentence; moving forward places point right after the +punctuation that ends the sentence. Neither one moves over the +whitespace at the sentence boundary. + +@kindex M-k +@kindex C-x DEL +@findex kill-sentence +@findex backward-kill-sentence + Just as @kbd{C-a} and @kbd{C-e} have a kill command, @kbd{C-k}, to go +with them, so @kbd{M-a} and @kbd{M-e} have a corresponding kill command +@kbd{M-k} (@code{kill-sentence}) which kills from point to the end of +the sentence. With minus one as an argument it kills back to the +beginning of the sentence. Larger arguments serve as a repeat count. +There is also a command, @kbd{C-x @key{DEL}} +(@code{backward-kill-sentence}), for killing back to the beginning of a +sentence. This command is useful when you change your mind in the +middle of composing text. + + The sentence commands assume that you follow the American typist's +convention of putting two spaces at the end of a sentence; they consider +a sentence to end wherever there is a @samp{.}, @samp{?} or @samp{!} +followed by the end of a line or two spaces, with any number of +@samp{)}, @samp{]}, @samp{'}, or @samp{"} characters allowed in between. +A sentence also begins or ends wherever a paragraph begins or ends. +It is useful to follow this convention, because it makes a distinction +between periods that end a sentence and periods that indicate +abbreviations; that enables the Emacs sentence commands to distinguish, +too. These commands do not stop for periods that indicate abbreviations. + +@vindex sentence-end-double-space + If you want to use just one space between sentences, you can set the +variable @code{sentence-end-double-space} to @code{nil} to make the +sentence commands stop for single spaces. However, this mode has a +drawback: there is no way to distinguish between periods that end +sentences and those that indicate abbreviations. For convenient and +reliable editing, we therefore recommend you follow the two-space +convention. The variable @code{sentence-end-double-space} also +affects filling (@pxref{Fill Commands}) in related ways. + +@vindex sentence-end + The variable @code{sentence-end} controls how to recognize the end +of a sentence. If non-@code{nil}, it is a regexp that matches the +last few characters of a sentence, together with the whitespace +following the sentence. If the value is @code{nil}, the default, then +Emacs computes the regexp according to various criteria such as the +value of @code{sentence-end-double-space}. @xref{Regexp Example}, for +a detailed explanation of one of the regular expressions Emacs uses +for this purpose. + +@vindex sentence-end-without-period + Some languages do not use periods to indicate the end of a sentence. +For example, sentences in Thai end with a double space but without a +period. Set the variable @code{sentence-end-without-period} to +@code{t} in such cases. + +@node Paragraphs +@section Paragraphs +@cindex paragraphs +@cindex manipulating paragraphs +@kindex M-@{ +@kindex M-@} +@findex backward-paragraph +@findex forward-paragraph + + The Emacs commands for manipulating paragraphs are also on Meta keys. + +@table @kbd +@item M-@{ +Move back to previous paragraph beginning (@code{backward-paragraph}). +@item M-@} +Move forward to next paragraph end (@code{forward-paragraph}). +@item M-h +Put point and mark around this or next paragraph (@code{mark-paragraph}). +@end table + + @kbd{M-@{} moves to the beginning of the current or previous +paragraph, while @kbd{M-@}} moves to the end of the current or next +paragraph. Blank lines and text-formatter command lines separate +paragraphs and are not considered part of any paragraph. If there is +a blank line before the paragraph, @kbd{M-@{} moves to the blank line, +because that is convenient in practice. + + In Text mode, an indented line is not a paragraph break. If you +want indented lines to have this effect, use Paragraph-Indent Text +mode instead. @xref{Text Mode}. + + In major modes for programs, paragraphs begin and end only at blank +lines. This makes the paragraph commands useful, even though there +are no paragraphs as such in a program. + + When you have set a fill prefix, then paragraphs are delimited by +all lines which don't start with the fill prefix. @xref{Filling}. + +@kindex M-h +@findex mark-paragraph + When you wish to operate on a paragraph, you can use the command +@kbd{M-h} (@code{mark-paragraph}) to set the region around it. Thus, +for example, @kbd{M-h C-w} kills the paragraph around or after point. +The @kbd{M-h} command puts point at the beginning and mark at the end of +the paragraph point was in. In Transient Mark mode, it activates the +mark. If point is between paragraphs (in a run of blank lines, or at a +boundary), the paragraph following point is surrounded by point and +mark. If there are blank lines preceding the first line of the +paragraph, one of these blank lines is included in the region. + +@vindex paragraph-start +@vindex paragraph-separate + The precise definition of a paragraph boundary is controlled by the +variables @code{paragraph-separate} and @code{paragraph-start}. The +value of @code{paragraph-start} is a regexp that should match any line +that either starts or separates paragraphs. The value of +@code{paragraph-separate} is another regexp that should match only lines +that separate paragraphs without being part of any paragraph (for +example, blank lines). Lines that start a new paragraph and are +contained in it must match only @code{paragraph-start}, not +@code{paragraph-separate}. Each regular expression must match at the +left margin. For example, in Fundamental mode, @code{paragraph-start} +is @w{@code{"\f\\|[ \t]*$"}}, and @code{paragraph-separate} is +@w{@code{"[ \t\f]*$"}}. + + Normally it is desirable for page boundaries to separate paragraphs. +The default values of these variables recognize the usual separator for +pages. + +@node Pages +@section Pages + +@cindex pages +@cindex formfeed + Files are often thought of as divided into @dfn{pages} by the +@dfn{formfeed} character (@acronym{ASCII} control-L, octal code 014). +When you print hardcopy for a file, this character forces a page break; +thus, each page of the file goes on a separate page on paper. Most Emacs +commands treat the page-separator character just like any other +character: you can insert it with @kbd{C-q C-l}, and delete it with +@key{DEL}. Thus, you are free to paginate your file or not. However, +since pages are often meaningful divisions of the file, Emacs provides +commands to move over them and operate on them. + +@table @kbd +@item C-x [ +Move point to previous page boundary (@code{backward-page}). +@item C-x ] +Move point to next page boundary (@code{forward-page}). +@item C-x C-p +Put point and mark around this page (or another page) (@code{mark-page}). +@item C-x l +Count the lines in this page (@code{count-lines-page}). +@end table + +@kindex C-x [ +@kindex C-x ] +@findex forward-page +@findex backward-page + The @kbd{C-x [} (@code{backward-page}) command moves point to immediately +after the previous page delimiter. If point is already right after a page +delimiter, it skips that one and stops at the previous one. A numeric +argument serves as a repeat count. The @kbd{C-x ]} (@code{forward-page}) +command moves forward past the next page delimiter. + +@kindex C-x C-p +@findex mark-page + The @kbd{C-x C-p} command (@code{mark-page}) puts point at the +beginning of the current page and the mark at the end. The page +delimiter at the end is included (the mark follows it). The page +delimiter at the front is excluded (point follows it). In Transient +Mark mode, this command activates the mark. + + @kbd{C-x C-p C-w} is a handy way to kill a page to move it +elsewhere. If you move to another page delimiter with @kbd{C-x [} and +@kbd{C-x ]}, then yank the killed page, all the pages will be properly +delimited once again. The reason @kbd{C-x C-p} includes only the +following page delimiter in the region is to ensure that. + + A numeric argument to @kbd{C-x C-p} is used to specify which page to go +to, relative to the current one. Zero means the current page. One means +the next page, and @minus{}1 means the previous one. + +@kindex C-x l +@findex count-lines-page + The @kbd{C-x l} command (@code{count-lines-page}) is good for deciding +where to break a page in two. It displays in the echo area the total number +of lines in the current page, and then divides it up into those preceding +the current line and those following, as in + +@example +Page has 96 (72+25) lines +@end example + +@noindent + Notice that the sum is off by one; this is correct if point is not at the +beginning of a line. + +@vindex page-delimiter + The variable @code{page-delimiter} controls where pages begin. Its +value is a regexp that matches the beginning of a line that separates +pages. The normal value of this variable is @code{"^\f"}, which +matches a formfeed character at the beginning of a line. + +@node Filling +@section Filling Text +@cindex filling text + + @dfn{Filling} text means breaking it up into lines that fit a +specified width. Emacs does filling in two ways. In Auto Fill mode, +inserting text with self-inserting characters also automatically fills +it. There are also explicit fill commands that you can use when editing +text leaves it unfilled. When you edit formatted text, you can specify +a style of filling for each portion of the text (@pxref{Formatted +Text}). + +@menu +* Auto Fill:: Auto Fill mode breaks long lines automatically. +* Fill Commands:: Commands to refill paragraphs and center lines. +* Fill Prefix:: Filling paragraphs that are indented + or in a comment, etc. +* Adaptive Fill:: How Emacs can determine the fill prefix automatically. +* Refill:: Keeping paragraphs filled. +* Longlines:: Editing text with very long lines. +@end menu + +@node Auto Fill +@subsection Auto Fill Mode +@cindex Auto Fill mode +@cindex mode, Auto Fill + + @dfn{Auto Fill} mode is a minor mode in which lines are broken +automatically when they become too wide. Breaking happens only when +you type a @key{SPC} or @key{RET}. + +@table @kbd +@item M-x auto-fill-mode +Enable or disable Auto Fill mode. +@item @key{SPC} +@itemx @key{RET} +In Auto Fill mode, break lines when appropriate. +@end table + +@findex auto-fill-mode + @kbd{M-x auto-fill-mode} turns Auto Fill mode on if it was off, or off +if it was on. With a positive numeric argument it always turns Auto +Fill mode on, and with a negative argument always turns it off. You can +see when Auto Fill mode is in effect by the presence of the word +@samp{Fill} in the mode line, inside the parentheses. Auto Fill mode is +a minor mode which is enabled or disabled for each buffer individually. +@xref{Minor Modes}. + + In Auto Fill mode, lines are broken automatically at spaces when they +get longer than the desired width. Line breaking and rearrangement +takes place only when you type @key{SPC} or @key{RET}. If you wish to +insert a space or newline without permitting line-breaking, type +@kbd{C-q @key{SPC}} or @kbd{C-q C-j} (recall that a newline is really a +control-J). Also, @kbd{C-o} inserts a newline without line breaking. + + Auto Fill mode works well with programming-language modes, because it +indents new lines with @key{TAB}. If a line ending in a comment gets +too long, the text of the comment is split into two comment lines. +Optionally, new comment delimiters are inserted at the end of the first +line and the beginning of the second so that each line is a separate +comment; the variable @code{comment-multi-line} controls the choice +(@pxref{Comments}). + + Adaptive filling (@pxref{Adaptive Fill}) works for Auto Filling as +well as for explicit fill commands. It takes a fill prefix +automatically from the second or first line of a paragraph. + + Auto Fill mode does not refill entire paragraphs; it can break lines but +cannot merge lines. So editing in the middle of a paragraph can result in +a paragraph that is not correctly filled. The easiest way to make the +paragraph properly filled again is usually with the explicit fill commands. +@ifnottex +@xref{Fill Commands}. +@end ifnottex + + Many users like Auto Fill mode and want to use it in all text files. +The section on init files says how to arrange this permanently for yourself. +@xref{Init File}. + +@node Fill Commands +@subsection Explicit Fill Commands + +@table @kbd +@item M-q +Fill current paragraph (@code{fill-paragraph}). +@item C-x f +Set the fill column (@code{set-fill-column}). +@item M-x fill-region +Fill each paragraph in the region (@code{fill-region}). +@item M-x fill-region-as-paragraph +Fill the region, considering it as one paragraph. +@item M-s +Center a line. +@end table + +@kindex M-q +@findex fill-paragraph + To refill a paragraph, use the command @kbd{M-q} +(@code{fill-paragraph}). This operates on the paragraph that point is +inside, or the one after point if point is between paragraphs. +Refilling works by removing all the line-breaks, then inserting new ones +where necessary. + +@findex fill-region + To refill many paragraphs, use @kbd{M-x fill-region}, which +finds the paragraphs in the region and fills each of them. + +@findex fill-region-as-paragraph + @kbd{M-q} and @code{fill-region} use the same criteria as @kbd{M-h} +for finding paragraph boundaries (@pxref{Paragraphs}). For more +control, you can use @kbd{M-x fill-region-as-paragraph}, which refills +everything between point and mark as a single paragraph. This command +deletes any blank lines within the region, so separate blocks of text +end up combined into one block. + +@cindex justification + A numeric argument to @kbd{M-q} tells it to @dfn{justify} the text +as well as filling it. This means that extra spaces are inserted to +make the right margin line up exactly at the fill column. To remove +the extra spaces, use @kbd{M-q} with no argument. (Likewise for +@code{fill-region}.) Another way to control justification, and choose +other styles of filling, is with the @code{justification} text +property; see @ref{Format Justification}. + +@kindex M-s @r{(Text mode)} +@cindex centering +@findex center-line + The command @kbd{M-s} (@code{center-line}) centers the current line +within the current fill column. With an argument @var{n}, it centers +@var{n} lines individually and moves past them. This binding is +made by Text mode and is available only in that and related modes +(@pxref{Text Mode}). + +@vindex fill-column +@kindex C-x f +@findex set-fill-column + The maximum line width for filling is in the variable +@code{fill-column}. Altering the value of @code{fill-column} makes it +local to the current buffer; until that time, the default value is in +effect. The default is initially 70. @xref{Locals}. The easiest way +to set @code{fill-column} is to use the command @kbd{C-x f} +(@code{set-fill-column}). With a numeric argument, it uses that as the +new fill column. With just @kbd{C-u} as argument, it sets +@code{fill-column} to the current horizontal position of point. + + Emacs commands normally consider a period followed by two spaces or by +a newline as the end of a sentence; a period followed by just one space +indicates an abbreviation and not the end of a sentence. To preserve +the distinction between these two ways of using a period, the fill +commands do not break a line after a period followed by just one space. + + If the variable @code{sentence-end-double-space} is @code{nil}, the +fill commands expect and leave just one space at the end of a sentence. +Ordinarily this variable is @code{t}, so the fill commands insist on +two spaces for the end of a sentence, as explained above. @xref{Sentences}. + +@vindex colon-double-space + If the variable @code{colon-double-space} is non-@code{nil}, the +fill commands put two spaces after a colon. + +@vindex fill-nobreak-predicate + The variable @code{fill-nobreak-predicate} is a hook (an abnormal +hook, @pxref{Hooks}) specifying additional conditions where +line-breaking is not allowed. Each function is called with no +arguments, with point at a place where Emacs is considering breaking +the line. If a function returns a non-@code{nil} value, then that's +a bad place to break the line. Two standard functions you can use are +@code{fill-single-word-nobreak-p} (don't break after the first word of +a sentence or before the last) and @code{fill-french-nobreak-p} (don't +break after @samp{(} or before @samp{)}, @samp{:} or @samp{?}). + +@node Fill Prefix +@subsection The Fill Prefix + +@cindex fill prefix + To fill a paragraph in which each line starts with a special marker +(which might be a few spaces, giving an indented paragraph), you can use +the @dfn{fill prefix} feature. The fill prefix is a string that Emacs +expects every line to start with, and which is not included in filling. +You can specify a fill prefix explicitly; Emacs can also deduce the +fill prefix automatically (@pxref{Adaptive Fill}). + +@table @kbd +@item C-x . +Set the fill prefix (@code{set-fill-prefix}). +@item M-q +Fill a paragraph using current fill prefix (@code{fill-paragraph}). +@item M-x fill-individual-paragraphs +Fill the region, considering each change of indentation as starting a +new paragraph. +@item M-x fill-nonuniform-paragraphs +Fill the region, considering only paragraph-separator lines as starting +a new paragraph. +@end table + +@kindex C-x . +@findex set-fill-prefix + To specify a fill prefix for the current buffer, move to a line that +starts with the desired prefix, put point at the end of the prefix, +and type @w{@kbd{C-x .}}@: (@code{set-fill-prefix}). (That's a period +after the @kbd{C-x}.) To turn off the fill prefix, specify an empty +prefix: type @w{@kbd{C-x .}}@: with point at the beginning of a line. + + When a fill prefix is in effect, the fill commands remove the fill +prefix from each line of the paragraph before filling and insert it on +each line after filling. (The beginning of the first line of the +paragraph is left unchanged, since often that is intentionally +different.) Auto Fill mode also inserts the fill prefix automatically +when it makes a new line. The @kbd{C-o} command inserts the fill +prefix on new lines it creates, when you use it at the beginning of a +line (@pxref{Blank Lines}). Conversely, the command @kbd{M-^} deletes +the prefix (if it occurs) after the newline that it deletes +(@pxref{Indentation}). + + For example, if @code{fill-column} is 40 and you set the fill prefix +to @samp{;; }, then @kbd{M-q} in the following text + +@example +;; This is an +;; example of a paragraph +;; inside a Lisp-style comment. +@end example + +@noindent +produces this: + +@example +;; This is an example of a paragraph +;; inside a Lisp-style comment. +@end example + + Lines that do not start with the fill prefix are considered to start +paragraphs, both in @kbd{M-q} and the paragraph commands; this gives +good results for paragraphs with hanging indentation (every line +indented except the first one). Lines which are blank or indented once +the prefix is removed also separate or start paragraphs; this is what +you want if you are writing multi-paragraph comments with a comment +delimiter on each line. + +@findex fill-individual-paragraphs + You can use @kbd{M-x fill-individual-paragraphs} to set the fill +prefix for each paragraph automatically. This command divides the +region into paragraphs, treating every change in the amount of +indentation as the start of a new paragraph, and fills each of these +paragraphs. Thus, all the lines in one ``paragraph'' have the same +amount of indentation. That indentation serves as the fill prefix for +that paragraph. + +@findex fill-nonuniform-paragraphs + @kbd{M-x fill-nonuniform-paragraphs} is a similar command that divides +the region into paragraphs in a different way. It considers only +paragraph-separating lines (as defined by @code{paragraph-separate}) as +starting a new paragraph. Since this means that the lines of one +paragraph may have different amounts of indentation, the fill prefix +used is the smallest amount of indentation of any of the lines of the +paragraph. This gives good results with styles that indent a paragraph's +first line more or less that the rest of the paragraph. + +@vindex fill-prefix + The fill prefix is stored in the variable @code{fill-prefix}. Its value +is a string, or @code{nil} when there is no fill prefix. This is a +per-buffer variable; altering the variable affects only the current buffer, +but there is a default value which you can change as well. @xref{Locals}. + + The @code{indentation} text property provides another way to control +the amount of indentation paragraphs receive. @xref{Format Indentation}. + +@node Adaptive Fill +@subsection Adaptive Filling + +@cindex adaptive filling + The fill commands can deduce the proper fill prefix for a paragraph +automatically in certain cases: either whitespace or certain punctuation +characters at the beginning of a line are propagated to all lines of the +paragraph. + + If the paragraph has two or more lines, the fill prefix is taken from +the paragraph's second line, but only if it appears on the first line as +well. + + If a paragraph has just one line, fill commands @emph{may} take a +prefix from that line. The decision is complicated because there are +three reasonable things to do in such a case: + +@itemize @bullet +@item +Use the first line's prefix on all the lines of the paragraph. + +@item +Indent subsequent lines with whitespace, so that they line up under the +text that follows the prefix on the first line, but don't actually copy +the prefix from the first line. + +@item +Don't do anything special with the second and following lines. +@end itemize + + All three of these styles of formatting are commonly used. So the +fill commands try to determine what you would like, based on the prefix +that appears and on the major mode. Here is how. + +@vindex adaptive-fill-first-line-regexp + If the prefix found on the first line matches +@code{adaptive-fill-first-line-regexp}, or if it appears to be a +comment-starting sequence (this depends on the major mode), then the +prefix found is used for filling the paragraph, provided it would not +act as a paragraph starter on subsequent lines. + + Otherwise, the prefix found is converted to an equivalent number of +spaces, and those spaces are used as the fill prefix for the rest of the +lines, provided they would not act as a paragraph starter on subsequent +lines. + + In Text mode, and other modes where only blank lines and page +delimiters separate paragraphs, the prefix chosen by adaptive filling +never acts as a paragraph starter, so it can always be used for filling. + +@vindex adaptive-fill-mode +@vindex adaptive-fill-regexp + The variable @code{adaptive-fill-regexp} determines what kinds of line +beginnings can serve as a fill prefix: any characters at the start of +the line that match this regular expression are used. If you set the +variable @code{adaptive-fill-mode} to @code{nil}, the fill prefix is +never chosen automatically. + +@vindex adaptive-fill-function + You can specify more complex ways of choosing a fill prefix +automatically by setting the variable @code{adaptive-fill-function} to a +function. This function is called with point after the left margin of a +line, and it should return the appropriate fill prefix based on that +line. If it returns @code{nil}, @code{adaptive-fill-regexp} gets +a chance to find a prefix. + +@node Refill +@subsection Refill Mode +@cindex refilling text, word processor style +@cindex modes, Refill +@cindex Refill minor mode + + Refill minor mode provides support for keeping paragraphs filled as +you type or modify them in other ways. It provides an effect similar +to typical word processor behavior. This works by running a +paragraph-filling command at suitable times. + + To toggle the use of Refill mode in the current buffer, type +@kbd{M-x refill-mode}. When you are typing text, only characters +which normally trigger auto filling, like the space character, will +trigger refilling. This is to avoid making it too slow. Apart from +self-inserting characters, other commands which modify the text cause +refilling. + + The current implementation is preliminary and not robust. You can +get better ``line wrapping'' behavior using Longlines mode. +@xref{Longlines}. However, Longlines mode has an important +side-effect: the newlines that it inserts for you are not saved to +disk, so the files that you make with Longlines mode will appear to be +completely unfilled if you edit them without Longlines mode. + +@node Longlines +@subsection Long Lines Mode +@cindex refilling text, word processor style +@cindex modes, Long Lines +@cindex word wrap +@cindex Long Lines minor mode + + Long Lines mode is a minor mode for @dfn{word wrapping}; it lets you +edit ``unfilled'' text files, which Emacs would normally display as a +bunch of extremely long lines. Many text editors, such as those built +into many web browsers, normally do word wrapping. + +@findex longlines-mode + To enable Long Lines mode, type @kbd{M-x longlines-mode}. If the +text is full of long lines, this will ``wrap'' them +immediately---i.e., break up to fit in the window. As you edit the +text, Long Lines mode automatically re-wraps lines by inserting or +deleting @dfn{soft newlines} as necessary (@pxref{Hard and Soft +Newlines}.) These soft newlines won't show up when you save the +buffer into a file, or when you copy the text into the kill ring, +clipboard, or a register. + +@findex longlines-auto-wrap + Word wrapping is @emph{not} the same as ordinary filling +(@pxref{Fill Commands}). It does not contract multiple spaces into a +single space, recognize fill prefixes (@pxref{Fill Prefix}), or +perform adaptive filling (@pxref{Adaptive Fill}). The reason for this +is that a wrapped line is still, conceptually, a single line. Each +soft newline is equivalent to exactly one space in that long line, and +vice versa. However, you can still call filling functions such as +@kbd{M-q}, and these will work as expected, inserting soft newlines +that won't show up on disk or when the text is copied. You can even +rely entirely on the normal fill commands by turning off automatic +line wrapping, with @kbd{C-u M-x longlines-auto-wrap}. To turn +automatic line wrapping back on, type @kbd{M-x longlines-auto-wrap}. + +@findex longlines-show-hard-newlines + Type @kbd{RET} to insert a hard newline, one which automatic +refilling will not remove. If you want to see where all the hard +newlines are, type @kbd{M-x longlines-show-hard-newlines}. This will +mark each hard newline with a special symbol. The same command with a +prefix argument turns this display off. + + Long Lines mode does not change normal text files that are already +filled, since the existing newlines are considered hard newlines. +Before Long Lines can do anything, you need to transform each +paragraph into a long line. One way is to set @code{fill-column} to a +large number (e.g., @kbd{C-u 9999 C-x f}), re-fill all the paragraphs, +and then set @code{fill-column} back to its original value. + +@node Case +@section Case Conversion Commands +@cindex case conversion + + Emacs has commands for converting either a single word or any arbitrary +range of text to upper case or to lower case. + +@table @kbd +@item M-l +Convert following word to lower case (@code{downcase-word}). +@item M-u +Convert following word to upper case (@code{upcase-word}). +@item M-c +Capitalize the following word (@code{capitalize-word}). +@item C-x C-l +Convert region to lower case (@code{downcase-region}). +@item C-x C-u +Convert region to upper case (@code{upcase-region}). +@end table + +@kindex M-l +@kindex M-u +@kindex M-c +@cindex words, case conversion +@cindex converting text to upper or lower case +@cindex capitalizing words +@findex downcase-word +@findex upcase-word +@findex capitalize-word + The word conversion commands are the most useful. @kbd{M-l} +(@code{downcase-word}) converts the word after point to lower case, moving +past it. Thus, repeating @kbd{M-l} converts successive words. +@kbd{M-u} (@code{upcase-word}) converts to all capitals instead, while +@kbd{M-c} (@code{capitalize-word}) puts the first letter of the word +into upper case and the rest into lower case. All these commands convert +several words at once if given an argument. They are especially convenient +for converting a large amount of text from all upper case to mixed case, +because you can move through the text using @kbd{M-l}, @kbd{M-u} or +@kbd{M-c} on each word as appropriate, occasionally using @kbd{M-f} instead +to skip a word. + + When given a negative argument, the word case conversion commands apply +to the appropriate number of words before point, but do not move point. +This is convenient when you have just typed a word in the wrong case: you +can give the case conversion command and continue typing. + + If a word case conversion command is given in the middle of a word, +it applies only to the part of the word which follows point. (This is +comparable to what @kbd{M-d} (@code{kill-word}) does.) With a +negative argument, case conversion applies only to the part of the +word before point. + +@kindex C-x C-l +@kindex C-x C-u +@findex downcase-region +@findex upcase-region + The other case conversion commands are @kbd{C-x C-u} +(@code{upcase-region}) and @kbd{C-x C-l} (@code{downcase-region}), which +convert everything between point and mark to the specified case. Point and +mark do not move. + + The region case conversion commands @code{upcase-region} and +@code{downcase-region} are normally disabled. This means that they ask +for confirmation if you try to use them. When you confirm, you may +enable the command, which means it will not ask for confirmation again. +@xref{Disabling}. + +@node Text Mode +@section Text Mode +@cindex Text mode +@cindex mode, Text +@findex text-mode + + When you edit files of text in a human language, it's more convenient +to use Text mode rather than Fundamental mode. To enter Text mode, type +@kbd{M-x text-mode}. + + In Text mode, only blank lines and page delimiters separate +paragraphs. As a result, paragraphs can be indented, and adaptive +filling determines what indentation to use when filling a paragraph. +@xref{Adaptive Fill}. + +@kindex TAB @r{(Text mode)} + Text mode defines @key{TAB} to run @code{indent-relative} +(@pxref{Indentation}), so that you can conveniently indent a line like +the previous line. + + Text mode turns off the features concerned with comments except when +you explicitly invoke them. It changes the syntax table so that +single-quotes are considered part of words. However, if a word starts +with single-quotes, these are treated as a prefix for purposes such as +capitalization. That is, @kbd{M-c} will convert @samp{'hello'} into +@samp{'Hello'}, as expected. + +@cindex Paragraph-Indent Text mode +@cindex mode, Paragraph-Indent Text +@findex paragraph-indent-text-mode +@findex paragraph-indent-minor-mode + If you indent the first lines of paragraphs, then you should use +Paragraph-Indent Text mode rather than Text mode. In this mode, you +do not need to have blank lines between paragraphs, because the +first-line indentation is sufficient to start a paragraph; however +paragraphs in which every line is indented are not supported. Use +@kbd{M-x paragraph-indent-text-mode} to enter this mode. Use @kbd{M-x +paragraph-indent-minor-mode} to enable an equivalent minor mode in +situations where you can't change the major mode---in mail +composition, for instance. + +@kindex M-TAB @r{(Text mode)} + Text mode, and all the modes based on it, define @kbd{M-@key{TAB}} +as the command @code{ispell-complete-word}, which performs completion +of the partial word in the buffer before point, using the spelling +dictionary as the space of possible words. @xref{Spelling}. If your +window manager defines @kbd{M-@key{TAB}} to switch windows, you can +type @kbd{@key{ESC} @key{TAB}} or @kbd{C-M-i}. + +@vindex text-mode-hook + Entering Text mode runs the hook @code{text-mode-hook}. Other major +modes related to Text mode also run this hook, followed by hooks of +their own; this includes Paragraph-Indent Text mode, Nroff mode, @TeX{} +mode, Outline mode, and Mail mode. Hook functions on +@code{text-mode-hook} can look at the value of @code{major-mode} to see +which of these modes is actually being entered. @xref{Hooks}. + +@ifnottex + Emacs provides two other modes for editing text that is to be passed +through a text formatter to produce fancy formatted printed output. +@xref{Nroff Mode}, for editing input to the formatter nroff. +@xref{TeX Mode,,@TeX{} Mode}, for editing input to the formatter TeX. + + Another mode is used for editing outlines. It allows you to view the +text at various levels of detail. You can view either the outline +headings alone or both headings and text; you can also hide some of the +headings at lower levels from view to make the high level structure more +visible. @xref{Outline Mode}. +@end ifnottex + +@node Outline Mode +@section Outline Mode +@cindex Outline mode +@cindex mode, Outline +@cindex invisible lines + +@findex outline-mode +@findex outline-minor-mode +@vindex outline-minor-mode-prefix + Outline mode is a major mode much like Text mode but intended for +editing outlines. It allows you to make parts of the text temporarily +invisible so that you can see the outline structure. Type @kbd{M-x +outline-mode} to switch to Outline mode as the major mode of the current +buffer. + + When Outline mode makes a line invisible, the line does not appear +on the screen. The screen appears exactly as if the invisible line +were deleted, except that an ellipsis (three periods in a row) appears +at the end of the previous visible line. (Multiple consecutive +invisible lines produce just one ellipsis.) + + Editing commands that operate on lines, such as @kbd{C-n} and +@kbd{C-p}, treat the text of the invisible line as part of the previous +visible line. Killing the ellipsis at the end of a visible line +really kills all the following invisible lines. + + Outline minor mode provides the same commands as the major mode, +Outline mode, but you can use it in conjunction with other major modes. +Type @kbd{M-x outline-minor-mode} to enable the Outline minor mode in +the current buffer. You can also specify this in the text of a file, +with a file local variable of the form @samp{mode: outline-minor} +(@pxref{File Variables}). + +@kindex C-c @@ @r{(Outline minor mode)} + The major mode, Outline mode, provides special key bindings on the +@kbd{C-c} prefix. Outline minor mode provides similar bindings with +@kbd{C-c @@} as the prefix; this is to reduce the conflicts with the +major mode's special commands. (The variable +@code{outline-minor-mode-prefix} controls the prefix used.) + +@vindex outline-mode-hook + Entering Outline mode runs the hook @code{text-mode-hook} followed by +the hook @code{outline-mode-hook} (@pxref{Hooks}). + +@menu +* Format: Outline Format. What the text of an outline looks like. +* Motion: Outline Motion. Special commands for moving through + outlines. +* Visibility: Outline Visibility. Commands to control what is visible. +* Views: Outline Views. Outlines and multiple views. +* Foldout:: Folding means zooming in on outlines. +@end menu + +@node Outline Format +@subsection Format of Outlines + +@cindex heading lines (Outline mode) +@cindex body lines (Outline mode) + Outline mode assumes that the lines in the buffer are of two types: +@dfn{heading lines} and @dfn{body lines}. A heading line represents a +topic in the outline. Heading lines start with one or more stars; the +number of stars determines the depth of the heading in the outline +structure. Thus, a heading line with one star is a major topic; all the +heading lines with two stars between it and the next one-star heading +are its subtopics; and so on. Any line that is not a heading line is a +body line. Body lines belong with the preceding heading line. Here is +an example: + +@example +* Food +This is the body, +which says something about the topic of food. + +** Delicious Food +This is the body of the second-level header. + +** Distasteful Food +This could have +a body too, with +several lines. + +*** Dormitory Food + +* Shelter +Another first-level topic with its header line. +@end example + + A heading line together with all following body lines is called +collectively an @dfn{entry}. A heading line together with all following +deeper heading lines and their body lines is called a @dfn{subtree}. + +@vindex outline-regexp + You can customize the criterion for distinguishing heading lines by +setting the variable @code{outline-regexp}. (The recommended ways to +do this are in a major mode function or with a file local variable.) +Any line whose beginning has a match for this regexp is considered a +heading line. Matches that start within a line (not at the left +margin) do not count. + + The length of the matching text determines the level of the heading; +longer matches make a more deeply nested level. Thus, for example, if +a text formatter has commands @samp{@@chapter}, @samp{@@section} and +@samp{@@subsection} to divide the document into chapters and sections, +you could make those lines count as heading lines by setting +@code{outline-regexp} to @samp{"@@chap\\|@@\\(sub\\)*section"}. Note +the trick: the two words @samp{chapter} and @samp{section} are equally +long, but by defining the regexp to match only @samp{chap} we ensure +that the length of the text matched on a chapter heading is shorter, +so that Outline mode will know that sections are contained in +chapters. This works as long as no other command starts with +@samp{@@chap}. + +@vindex outline-level + You can explicitly specify a rule for calculating the level of a +heading line by setting the variable @code{outline-level}. The value +of @code{outline-level} should be a function that takes no arguments +and returns the level of the current heading. The recommended ways to +set this variable are in a major mode command or with a file local +variable. + +@node Outline Motion +@subsection Outline Motion Commands + + Outline mode provides special motion commands that move backward and +forward to heading lines. + +@table @kbd +@item C-c C-n +Move point to the next visible heading line +(@code{outline-next-visible-heading}). +@item C-c C-p +Move point to the previous visible heading line +(@code{outline-previous-visible-heading}). +@item C-c C-f +Move point to the next visible heading line at the same level +as the one point is on (@code{outline-forward-same-level}). +@item C-c C-b +Move point to the previous visible heading line at the same level +(@code{outline-backward-same-level}). +@item C-c C-u +Move point up to a lower-level (more inclusive) visible heading line +(@code{outline-up-heading}). +@end table + +@findex outline-next-visible-heading +@findex outline-previous-visible-heading +@kindex C-c C-n @r{(Outline mode)} +@kindex C-c C-p @r{(Outline mode)} + @kbd{C-c C-n} (@code{outline-next-visible-heading}) moves down to the next +heading line. @kbd{C-c C-p} (@code{outline-previous-visible-heading}) moves +similarly backward. Both accept numeric arguments as repeat counts. The +names emphasize that invisible headings are skipped, but this is not really +a special feature. All editing commands that look for lines ignore the +invisible lines automatically. + +@findex outline-up-heading +@findex outline-forward-same-level +@findex outline-backward-same-level +@kindex C-c C-f @r{(Outline mode)} +@kindex C-c C-b @r{(Outline mode)} +@kindex C-c C-u @r{(Outline mode)} + More powerful motion commands understand the level structure of headings. +@kbd{C-c C-f} (@code{outline-forward-same-level}) and +@kbd{C-c C-b} (@code{outline-backward-same-level}) move from one +heading line to another visible heading at the same depth in +the outline. @kbd{C-c C-u} (@code{outline-up-heading}) moves +backward to another heading that is less deeply nested. + +@node Outline Visibility +@subsection Outline Visibility Commands + + The other special commands of outline mode are used to make lines visible +or invisible. Their names all start with @code{hide} or @code{show}. +Most of them fall into pairs of opposites. They are not undoable; instead, +you can undo right past them. Making lines visible or invisible is simply +not recorded by the undo mechanism. + + Many of these commands act on the ``current'' heading line. If +point is on a heading line, that is the current heading line; if point +is on a body line, the current heading line is the nearest preceding +header line. + +@table @kbd +@item C-c C-c +Make the current heading line's body invisible (@code{hide-entry}). +@item C-c C-e +Make the current heading line's body visible (@code{show-entry}). +@item C-c C-d +Make everything under the current heading invisible, not including the +heading itself (@code{hide-subtree}). +@item C-c C-s +Make everything under the current heading visible, including body, +subheadings, and their bodies (@code{show-subtree}). +@item C-c C-l +Make the body of the current heading line, and of all its subheadings, +invisible (@code{hide-leaves}). +@item C-c C-k +Make all subheadings of the current heading line, at all levels, +visible (@code{show-branches}). +@item C-c C-i +Make immediate subheadings (one level down) of the current heading +line visible (@code{show-children}). +@item C-c C-t +Make all body lines in the buffer invisible (@code{hide-body}). +@item C-c C-a +Make all lines in the buffer visible (@code{show-all}). +@item C-c C-q +Hide everything except the top @var{n} levels of heading lines +(@code{hide-sublevels}). +@item C-c C-o +Hide everything except for the heading or body that point is in, plus +the headings leading up from there to the top level of the outline +(@code{hide-other}). +@end table + +@findex hide-entry +@findex show-entry +@kindex C-c C-c @r{(Outline mode)} +@kindex C-c C-e @r{(Outline mode)} + Two commands that are exact opposites are @kbd{C-c C-c} +(@code{hide-entry}) and @kbd{C-c C-e} (@code{show-entry}). They apply +to the body lines directly following the current heading line. +Subheadings and their bodies are not affected. + +@findex hide-subtree +@findex show-subtree +@kindex C-c C-s @r{(Outline mode)} +@kindex C-c C-d @r{(Outline mode)} +@cindex subtree (Outline mode) + Two more powerful opposites are @kbd{C-c C-d} (@code{hide-subtree}) +and @kbd{C-c C-s} (@code{show-subtree}). Both apply to the current +heading line's @dfn{subtree}: its body, all its subheadings, both +direct and indirect, and all of their bodies. In other words, the +subtree contains everything following the current heading line, up to +and not including the next heading of the same or higher rank. + +@findex hide-leaves +@findex show-branches +@kindex C-c C-l @r{(Outline mode)} +@kindex C-c C-k @r{(Outline mode)} + Intermediate between a visible subtree and an invisible one is having +all the subheadings visible but none of the body. There are two +commands for doing this, depending on whether you want to hide the +bodies or make the subheadings visible. They are @kbd{C-c C-l} +(@code{hide-leaves}) and @kbd{C-c C-k} (@code{show-branches}). + +@kindex C-c C-i @r{(Outline mode)} +@findex show-children + A little weaker than @code{show-branches} is @kbd{C-c C-i} +(@code{show-children}). It makes just the direct subheadings +visible---those one level down. Deeper subheadings remain invisible, if +they were invisible. + +@findex hide-body +@findex show-all +@kindex C-c C-t @r{(Outline mode)} +@kindex C-c C-a @r{(Outline mode)} + Two commands have a blanket effect on the whole file. @kbd{C-c C-t} +(@code{hide-body}) makes all body lines invisible, so that you see just +the outline structure (as a special exception, it will not hide lines +at the top of the file, preceding the first header line, even though +these are technically body lines). @kbd{C-c C-a} (@code{show-all}) +makes all lines visible. These commands can be thought of as a pair +of opposites even though @kbd{C-c C-a} applies to more than just body +lines. + +@findex hide-sublevels +@kindex C-c C-q @r{(Outline mode)} + The command @kbd{C-c C-q} (@code{hide-sublevels}) hides all but the +top level headings. With a numeric argument @var{n}, it hides everything +except the top @var{n} levels of heading lines. + +@findex hide-other +@kindex C-c C-o @r{(Outline mode)} + The command @kbd{C-c C-o} (@code{hide-other}) hides everything except +the heading and body text that point is in, plus its parents (the headers +leading up from there to top level in the outline) and the top level +headings. + +@findex reveal-mode + When incremental search finds text that is hidden by Outline mode, +it makes that part of the buffer visible. If you exit the search +at that position, the text remains visible. You can also +automatically make text visible as you navigate in it by using +@kbd{M-x reveal-mode}. + +@node Outline Views +@subsection Viewing One Outline in Multiple Views + +@cindex multiple views of outline +@cindex views of an outline +@cindex outline with multiple views +@cindex indirect buffers and outlines + You can display two views of a single outline at the same time, in +different windows. To do this, you must create an indirect buffer using +@kbd{M-x make-indirect-buffer}. The first argument of this command is +the existing outline buffer name, and its second argument is the name to +use for the new indirect buffer. @xref{Indirect Buffers}. + + Once the indirect buffer exists, you can display it in a window in the +normal fashion, with @kbd{C-x 4 b} or other Emacs commands. The Outline +mode commands to show and hide parts of the text operate on each buffer +independently; as a result, each buffer can have its own view. If you +want more than two views on the same outline, create additional indirect +buffers. + +@node Foldout +@subsection Folding Editing + +@cindex folding editing + The Foldout package extends Outline mode and Outline minor mode with +``folding'' commands. The idea of folding is that you zoom in on a +nested portion of the outline, while hiding its relatives at higher +levels. + + Consider an Outline mode buffer with all the text and subheadings under +level-1 headings hidden. To look at what is hidden under one of these +headings, you could use @kbd{C-c C-e} (@kbd{M-x show-entry}) to expose +the body, or @kbd{C-c C-i} to expose the child (level-2) headings. + +@kindex C-c C-z +@findex foldout-zoom-subtree + With Foldout, you use @kbd{C-c C-z} (@kbd{M-x foldout-zoom-subtree}). +This exposes the body and child subheadings, and narrows the buffer so +that only the @w{level-1} heading, the body and the level-2 headings are +visible. Now to look under one of the level-2 headings, position the +cursor on it and use @kbd{C-c C-z} again. This exposes the level-2 body +and its level-3 child subheadings and narrows the buffer again. Zooming +in on successive subheadings can be done as much as you like. A string +in the mode line shows how deep you've gone. + + When zooming in on a heading, to see only the child subheadings specify +a numeric argument: @kbd{C-u C-c C-z}. The number of levels of children +can be specified too (compare @kbd{M-x show-children}), e.g.@: @kbd{M-2 +C-c C-z} exposes two levels of child subheadings. Alternatively, the +body can be specified with a negative argument: @kbd{M-- C-c C-z}. The +whole subtree can be expanded, similarly to @kbd{C-c C-s} (@kbd{M-x +show-subtree}), by specifying a zero argument: @kbd{M-0 C-c C-z}. + + While you're zoomed in, you can still use Outline mode's exposure and +hiding functions without disturbing Foldout. Also, since the buffer is +narrowed, ``global'' editing actions will only affect text under the +zoomed-in heading. This is useful for restricting changes to a +particular chapter or section of your document. + +@kindex C-c C-x +@findex foldout-exit-fold + To unzoom (exit) a fold, use @kbd{C-c C-x} (@kbd{M-x foldout-exit-fold}). +This hides all the text and subheadings under the top-level heading and +returns you to the previous view of the buffer. Specifying a numeric +argument exits that many levels of folds. Specifying a zero argument +exits all folds. + + To cancel the narrowing of a fold without hiding the text and +subheadings, specify a negative argument. For example, @kbd{M--2 C-c +C-x} exits two folds and leaves the text and subheadings exposed. + + Foldout mode also provides mouse commands for entering and exiting +folds, and for showing and hiding text: + +@table @asis +@item @kbd{C-M-Mouse-1} zooms in on the heading clicked on +@itemize @asis +@item +single click: expose body. +@item +double click: expose subheadings. +@item +triple click: expose body and subheadings. +@item +quad click: expose entire subtree. +@end itemize +@item @kbd{C-M-Mouse-2} exposes text under the heading clicked on +@itemize @asis +@item +single click: expose body. +@item +double click: expose subheadings. +@item +triple click: expose body and subheadings. +@item +quad click: expose entire subtree. +@end itemize +@item @kbd{C-M-Mouse-3} hides text under the heading clicked on or exits fold +@itemize @asis +@item +single click: hide subtree. +@item +double click: exit fold and hide text. +@item +triple click: exit fold without hiding text. +@item +quad click: exit all folds and hide text. +@end itemize +@end table + +@vindex foldout-mouse-modifiers + You can specify different modifier keys (instead of +@kbd{Control-Meta-}) by setting @code{foldout-mouse-modifiers}; but if +you have already loaded the @file{foldout.el} library, you must reload +it in order for this to take effect. + + To use the Foldout package, you can type @kbd{M-x load-library +@key{RET} foldout @key{RET}}; or you can arrange for to do that +automatically by putting this in your @file{.emacs} file: + +@example +(eval-after-load "outline" '(require 'foldout)) +@end example + +@node TeX Mode +@section @TeX{} Mode +@cindex @TeX{} mode +@cindex La@TeX{} mode +@cindex Sli@TeX{} mode +@cindex Doc@TeX{} mode +@cindex mode, @TeX{} +@cindex mode, La@TeX{} +@cindex mode, Sli@TeX{} +@cindex mode, Doc@TeX{} +@findex tex-mode +@findex plain-tex-mode +@findex latex-mode +@findex slitex-mode +@findex doctex-mode + + @TeX{} is a powerful text formatter written by Donald Knuth; it is +also free software, like GNU Emacs. La@TeX{} is a simplified input +format for @TeX{}, implemented by @TeX{} macros; it comes with @TeX{}. +Sli@TeX{} is a special form of La@TeX{}.@footnote{Sli@TeX{} is +obsoleted by the @samp{slides} document class and other alternative +packages in recent La@TeX{} versions.} Doc@TeX{} (@file{.dtx}) is a +special file format in which the La@TeX{} sources are written, +combining sources with documentation. + + Emacs has a special @TeX{} mode for editing @TeX{} input files. +It provides facilities for checking the balance of delimiters and for +invoking @TeX{} on all or part of the file. + +@vindex tex-default-mode + @TeX{} mode has four variants: Plain @TeX{} mode, La@TeX{} mode, +Sli@TeX{} mode, and Doc@TeX{} mode (these distinct major modes differ +only slightly). They are designed for editing the four different +formats. The command @kbd{M-x tex-mode} looks at the contents of the +buffer to determine whether the contents appear to be either La@TeX{} +input, Sli@TeX{}, or Doc@TeX{} input; if so, it selects the +appropriate mode. If the file contents do not appear to be La@TeX{}, +Sli@TeX{} or Doc@TeX{}, it selects Plain @TeX{} mode. If the contents +are insufficient to determine this, the variable +@code{tex-default-mode} controls which mode is used. + + When @kbd{M-x tex-mode} does not guess right, you can use the commands +@kbd{M-x plain-tex-mode}, @kbd{M-x latex-mode}, @kbd{M-x slitex-mode}, +and @kbd{doctex-mode} to select explicitly the particular variants of +@TeX{} mode. + +@menu +* Editing: TeX Editing. Special commands for editing in TeX mode. +* LaTeX: LaTeX Editing. Additional commands for LaTeX input files. +* Printing: TeX Print. Commands for printing part of a file with TeX. +* Misc: TeX Misc. Customization of TeX mode, and related features. +@end menu + +@node TeX Editing +@subsection @TeX{} Editing Commands + + Here are the special commands provided in @TeX{} mode for editing the +text of the file. + +@table @kbd +@item " +Insert, according to context, either @samp{``} or @samp{"} or +@samp{''} (@code{tex-insert-quote}). +@item C-j +Insert a paragraph break (two newlines) and check the previous +paragraph for unbalanced braces or dollar signs +(@code{tex-terminate-paragraph}). +@item M-x tex-validate-region +Check each paragraph in the region for unbalanced braces or dollar signs. +@item C-c @{ +Insert @samp{@{@}} and position point between them (@code{tex-insert-braces}). +@item C-c @} +Move forward past the next unmatched close brace (@code{up-list}). +@end table + +@findex tex-insert-quote +@kindex " @r{(@TeX{} mode)} + In @TeX{}, the character @samp{"} is not normally used; we use +@samp{``} to start a quotation and @samp{''} to end one. To make +editing easier under this formatting convention, @TeX{} mode overrides +the normal meaning of the key @kbd{"} with a command that inserts a pair +of single-quotes or backquotes (@code{tex-insert-quote}). To be +precise, this command inserts @samp{``} after whitespace or an open +brace, @samp{"} after a backslash, and @samp{''} after any other +character. + + If you need the character @samp{"} itself in unusual contexts, use +@kbd{C-q} to insert it. Also, @kbd{"} with a numeric argument always +inserts that number of @samp{"} characters. You can turn off the +feature of @kbd{"} expansion by eliminating that binding in the local +map (@pxref{Key Bindings}). + + In @TeX{} mode, @samp{$} has a special syntax code which attempts to +understand the way @TeX{} math mode delimiters match. When you insert a +@samp{$} that is meant to exit math mode, the position of the matching +@samp{$} that entered math mode is displayed for a second. This is the +same feature that displays the open brace that matches a close brace that +is inserted. However, there is no way to tell whether a @samp{$} enters +math mode or leaves it; so when you insert a @samp{$} that enters math +mode, the previous @samp{$} position is shown as if it were a match, even +though they are actually unrelated. + +@findex tex-insert-braces +@kindex C-c @{ @r{(@TeX{} mode)} +@findex up-list +@kindex C-c @} @r{(@TeX{} mode)} + @TeX{} uses braces as delimiters that must match. Some users prefer +to keep braces balanced at all times, rather than inserting them +singly. Use @kbd{C-c @{} (@code{tex-insert-braces}) to insert a pair of +braces. It leaves point between the two braces so you can insert the +text that belongs inside. Afterward, use the command @kbd{C-c @}} +(@code{up-list}) to move forward past the close brace. + +@findex tex-validate-region +@findex tex-terminate-paragraph +@kindex C-j @r{(@TeX{} mode)} + There are two commands for checking the matching of braces. @kbd{C-j} +(@code{tex-terminate-paragraph}) checks the paragraph before point, and +inserts two newlines to start a new paragraph. It outputs a message in +the echo area if any mismatch is found. @kbd{M-x tex-validate-region} +checks a region, paragraph by paragraph. The errors are listed in the +@samp{*Occur*} buffer, and you can use @kbd{C-c C-c} or @kbd{Mouse-2} in +that buffer to go to a particular mismatch. + + Note that Emacs commands count square brackets and parentheses in +@TeX{} mode, not just braces. This is not strictly correct for the +purpose of checking @TeX{} syntax. However, parentheses and square +brackets are likely to be used in text as matching delimiters and it is +useful for the various motion commands and automatic match display to +work with them. + +@node LaTeX Editing +@subsection La@TeX{} Editing Commands + + La@TeX{} mode, and its variant, Sli@TeX{} mode, provide a few extra +features not applicable to plain @TeX{}. + +@table @kbd +@item C-c C-o +Insert @samp{\begin} and @samp{\end} for La@TeX{} block and position +point on a line between them (@code{tex-latex-block}). +@item C-c C-e +Close the innermost La@TeX{} block not yet closed +(@code{tex-close-latex-block}). +@end table + +@findex tex-latex-block +@kindex C-c C-o @r{(La@TeX{} mode)} +@vindex latex-block-names + In La@TeX{} input, @samp{\begin} and @samp{\end} commands are used to +group blocks of text. To insert a @samp{\begin} and a matching +@samp{\end} (on a new line following the @samp{\begin}), use @kbd{C-c +C-o} (@code{tex-latex-block}). A blank line is inserted between the +two, and point is left there. You can use completion when you enter the +block type; to specify additional block type names beyond the standard +list, set the variable @code{latex-block-names}. For example, here's +how to add @samp{theorem}, @samp{corollary}, and @samp{proof}: + +@example +(setq latex-block-names '("theorem" "corollary" "proof")) +@end example + +@findex tex-close-latex-block +@kindex C-c C-e @r{(La@TeX{} mode)} + In La@TeX{} input, @samp{\begin} and @samp{\end} commands must +balance. You can use @kbd{C-c C-e} (@code{tex-close-latex-block}) to +insert automatically a matching @samp{\end} to match the last unmatched +@samp{\begin}. It indents the @samp{\end} to match the corresponding +@samp{\begin}. It inserts a newline after @samp{\end} if point is at +the beginning of a line. + +@node TeX Print +@subsection @TeX{} Printing Commands + + You can invoke @TeX{} as an inferior of Emacs on either the entire +contents of the buffer or just a region at a time. Running @TeX{} in +this way on just one chapter is a good way to see what your changes +look like without taking the time to format the entire file. + +@table @kbd +@item C-c C-r +Invoke @TeX{} on the current region, together with the buffer's header +(@code{tex-region}). +@item C-c C-b +Invoke @TeX{} on the entire current buffer (@code{tex-buffer}). +@item C-c @key{TAB} +Invoke Bib@TeX{} on the current file (@code{tex-bibtex-file}). +@item C-c C-f +Invoke @TeX{} on the current file (@code{tex-file}). +@item C-c C-l +Recenter the window showing output from the inferior @TeX{} so that +the last line can be seen (@code{tex-recenter-output-buffer}). +@item C-c C-k +Kill the @TeX{} subprocess (@code{tex-kill-job}). +@item C-c C-p +Print the output from the last @kbd{C-c C-r}, @kbd{C-c C-b}, or @kbd{C-c +C-f} command (@code{tex-print}). +@item C-c C-v +Preview the output from the last @kbd{C-c C-r}, @kbd{C-c C-b}, or @kbd{C-c +C-f} command (@code{tex-view}). +@item C-c C-q +Show the printer queue (@code{tex-show-print-queue}). +@item C-c C-c +Invoke some other compilation command on the entire current buffer +(@code{tex-compile}). +@end table + +@findex tex-buffer +@kindex C-c C-b @r{(@TeX{} mode)} +@findex tex-print +@kindex C-c C-p @r{(@TeX{} mode)} +@findex tex-view +@kindex C-c C-v @r{(@TeX{} mode)} +@findex tex-show-print-queue +@kindex C-c C-q @r{(@TeX{} mode)} + You can pass the current buffer through an inferior @TeX{} by means of +@kbd{C-c C-b} (@code{tex-buffer}). The formatted output appears in a +temporary file; to print it, type @kbd{C-c C-p} (@code{tex-print}). +Afterward, you can use @kbd{C-c C-q} (@code{tex-show-print-queue}) to +view the progress of your output towards being printed. If your terminal +has the ability to display @TeX{} output files, you can preview the +output on the terminal with @kbd{C-c C-v} (@code{tex-view}). + +@cindex @env{TEXINPUTS} environment variable +@vindex tex-directory + You can specify the directory to use for running @TeX{} by setting the +variable @code{tex-directory}. @code{"."} is the default value. If +your environment variable @env{TEXINPUTS} contains relative directory +names, or if your files contains @samp{\input} commands with relative +file names, then @code{tex-directory} @emph{must} be @code{"."} or you +will get the wrong results. Otherwise, it is safe to specify some other +directory, such as @code{"/tmp"}. + +@vindex tex-run-command +@vindex latex-run-command +@vindex slitex-run-command +@vindex tex-dvi-print-command +@vindex tex-dvi-view-command +@vindex tex-show-queue-command + If you want to specify which shell commands are used in the inferior @TeX{}, +you can do so by setting the values of the variables @code{tex-run-command}, +@code{latex-run-command}, @code{slitex-run-command}, +@code{tex-dvi-print-command}, @code{tex-dvi-view-command}, and +@code{tex-show-queue-command}. The default values may +(or may not) be appropriate for your system. + + Normally, the file name given to these commands comes at the end of +the command string; for example, @samp{latex @var{filename}}. In some +cases, however, the file name needs to be embedded in the command; an +example is when you need to provide the file name as an argument to one +command whose output is piped to another. You can specify where to put +the file name with @samp{*} in the command string. For example, + +@example +(setq tex-dvi-print-command "dvips -f * | lpr") +@end example + +@findex tex-kill-job +@kindex C-c C-k @r{(@TeX{} mode)} +@findex tex-recenter-output-buffer +@kindex C-c C-l @r{(@TeX{} mode)} + The terminal output from @TeX{}, including any error messages, appears +in a buffer called @samp{*tex-shell*}. If @TeX{} gets an error, you can +switch to this buffer and feed it input (this works as in Shell mode; +@pxref{Interactive Shell}). Without switching to this buffer you can +scroll it so that its last line is visible by typing @kbd{C-c +C-l}. + + Type @kbd{C-c C-k} (@code{tex-kill-job}) to kill the @TeX{} process if +you see that its output is no longer useful. Using @kbd{C-c C-b} or +@kbd{C-c C-r} also kills any @TeX{} process still running. + +@findex tex-region +@kindex C-c C-r @r{(@TeX{} mode)} + You can also pass an arbitrary region through an inferior @TeX{} by typing +@kbd{C-c C-r} (@code{tex-region}). This is tricky, however, because most files +of @TeX{} input contain commands at the beginning to set parameters and +define macros, without which no later part of the file will format +correctly. To solve this problem, @kbd{C-c C-r} allows you to designate a +part of the file as containing essential commands; it is included before +the specified region as part of the input to @TeX{}. The designated part +of the file is called the @dfn{header}. + +@cindex header (@TeX{} mode) + To indicate the bounds of the header in Plain @TeX{} mode, you insert two +special strings in the file. Insert @samp{%**start of header} before the +header, and @samp{%**end of header} after it. Each string must appear +entirely on one line, but there may be other text on the line before or +after. The lines containing the two strings are included in the header. +If @samp{%**start of header} does not appear within the first 100 lines of +the buffer, @kbd{C-c C-r} assumes that there is no header. + + In La@TeX{} mode, the header begins with @samp{\documentclass} or +@samp{\documentstyle} and ends with @samp{\begin@{document@}}. These +are commands that La@TeX{} requires you to use in any case, so nothing +special needs to be done to identify the header. + +@findex tex-file +@kindex C-c C-f @r{(@TeX{} mode)} + The commands (@code{tex-buffer}) and (@code{tex-region}) do all of their +work in a temporary directory, and do not have available any of the auxiliary +files needed by @TeX{} for cross-references; these commands are generally +not suitable for running the final copy in which all of the cross-references +need to be correct. + + When you want the auxiliary files for cross references, use @kbd{C-c +C-f} (@code{tex-file}) which runs @TeX{} on the current buffer's file, +in that file's directory. Before running @TeX{}, it offers to save any +modified buffers. Generally, you need to use (@code{tex-file}) twice to +get the cross-references right. + +@vindex tex-start-options + The value of the variable @code{tex-start-options} specifies +options for the @TeX{} run. + +@vindex tex-start-commands + The value of the variable @code{tex-start-commands} specifies @TeX{} +commands for starting @TeX{}. The default value causes @TeX{} to run +in nonstop mode. To run @TeX{} interactively, set the variable to +@code{""}. + +@vindex tex-main-file + Large @TeX{} documents are often split into several files---one main +file, plus subfiles. Running @TeX{} on a subfile typically does not +work; you have to run it on the main file. In order to make +@code{tex-file} useful when you are editing a subfile, you can set the +variable @code{tex-main-file} to the name of the main file. Then +@code{tex-file} runs @TeX{} on that file. + + The most convenient way to use @code{tex-main-file} is to specify it +in a local variable list in each of the subfiles. @xref{File +Variables}. + +@findex tex-bibtex-file +@kindex C-c TAB @r{(@TeX{} mode)} +@vindex tex-bibtex-command + For La@TeX{} files, you can use Bib@TeX{} to process the auxiliary +file for the current buffer's file. Bib@TeX{} looks up bibliographic +citations in a data base and prepares the cited references for the +bibliography section. The command @kbd{C-c @key{TAB}} +(@code{tex-bibtex-file}) runs the shell command +(@code{tex-bibtex-command}) to produce a @samp{.bbl} file for the +current buffer's file. Generally, you need to do @kbd{C-c C-f} +(@code{tex-file}) once to generate the @samp{.aux} file, then do +@kbd{C-c @key{TAB}} (@code{tex-bibtex-file}), and then repeat @kbd{C-c C-f} +(@code{tex-file}) twice more to get the cross-references correct. + +@findex tex-compile +@kindex C-c C-c @r{(@TeX{} mode)} + To invoke some other compilation program on the current @TeX{} +buffer, type @kbd{C-c C-c} (@code{tex-compile}). This command knows +how to pass arguments to many common programs, including +@file{pdflatex}, @file{yap}, @file{xdvi}, and @file{dvips}. You can +select your desired compilation program using the standard completion +keys (@pxref{Completion}). + +@node TeX Misc +@subsection @TeX{} Mode Miscellany + +@vindex tex-shell-hook +@vindex tex-mode-hook +@vindex latex-mode-hook +@vindex slitex-mode-hook +@vindex plain-tex-mode-hook + Entering any variant of @TeX{} mode runs the hooks +@code{text-mode-hook} and @code{tex-mode-hook}. Then it runs either +@code{plain-tex-mode-hook}, @code{latex-mode-hook}, or +@code{slitex-mode-hook}, whichever is appropriate. Starting the +@TeX{} shell runs the hook @code{tex-shell-hook}. @xref{Hooks}. + +@findex iso-iso2tex +@findex iso-tex2iso +@findex iso-iso2gtex +@findex iso-gtex2iso +@cindex Latin-1 @TeX{} encoding +@cindex @TeX{} encoding + The commands @kbd{M-x iso-iso2tex}, @kbd{M-x iso-tex2iso}, @kbd{M-x +iso-iso2gtex} and @kbd{M-x iso-gtex2iso} can be used to convert +between Latin-1 encoded files and @TeX{}-encoded equivalents. +@ignore +@c Too cryptic to be useful, too cryptic for me to make it better -- rms. + They +are included by default in the @code{format-alist} variable, so they +can be used with @kbd{M-x format-find-file}, for instance. +@end ignore + +@ignore @c Not worth documenting if it is only for Czech -- rms. +@findex tildify-buffer +@findex tildify-region +@cindex ties, @TeX{}, inserting +@cindex hard spaces, @TeX{}, inserting + The commands @kbd{M-x tildify-buffer} and @kbd{M-x tildify-region} +insert @samp{~} (@dfn{tie}) characters where they are conventionally +required. This is set up for Czech---customize the group +@samp{tildify} for other languages or for other sorts of markup. +@end ignore + +@cindex Ref@TeX{} package +@cindex references, La@TeX{} +@cindex La@TeX{} references + For managing all kinds of references for La@TeX{}, you can use +Ref@TeX{}. @inforef{Top,, reftex}. + +@node HTML Mode +@section SGML, XML, and HTML Modes + + The major modes for SGML and HTML include indentation support and +commands to operate on tags. This section describes the special +commands of these modes. (HTML mode is a slightly customized variant +of SGML mode.) + +@table @kbd +@item C-c C-n +@kindex C-c C-n @r{(SGML mode)} +@findex sgml-name-char +Interactively specify a special character and insert the SGML +@samp{&}-command for that character. + +@item C-c C-t +@kindex C-c C-t @r{(SGML mode)} +@findex sgml-tag +Interactively specify a tag and its attributes (@code{sgml-tag}). +This command asks you for a tag name and for the attribute values, +then inserts both the opening tag and the closing tag, leaving point +between them. + +With a prefix argument @var{n}, the command puts the tag around the +@var{n} words already present in the buffer after point. With +@minus{}1 as argument, it puts the tag around the region. (In +Transient Mark mode, it does this whenever a region is active.) + +@item C-c C-a +@kindex C-c C-a @r{(SGML mode)} +@findex sgml-attributes +Interactively insert attribute values for the current tag +(@code{sgml-attributes}). + +@item C-c C-f +@kindex C-c C-f @r{(SGML mode)} +@findex sgml-skip-tag-forward +Skip across a balanced tag group (which extends from an opening tag +through its corresponding closing tag) (@code{sgml-skip-tag-forward}). +A numeric argument acts as a repeat count. + +@item C-c C-b +@kindex C-c C-b @r{(SGML mode)} +@findex sgml-skip-tag-backward +Skip backward across a balanced tag group (which extends from an +opening tag through its corresponding closing tag) +(@code{sgml-skip-tag-forward}). A numeric argument acts as a repeat +count. + +@item C-c C-d +@kindex C-c C-d @r{(SGML mode)} +@findex sgml-delete-tag +Delete the tag at or after point, and delete the matching tag too +(@code{sgml-delete-tag}). If the tag at or after point is an opening +tag, delete the closing tag too; if it is a closing tag, delete the +opening tag too. + +@item C-c ? @var{tag} @key{RET} +@kindex C-c ? @r{(SGML mode)} +@findex sgml-tag-help +Display a description of the meaning of tag @var{tag} +(@code{sgml-tag-help}). If the argument @var{tag} is empty, describe +the tag at point. + +@item C-c / +@kindex C-c / @r{(SGML mode)} +@findex sgml-close-tag +Insert a close tag for the innermost unterminated tag +(@code{sgml-close-tag}). If called from within a tag or a comment, +close this element instead of inserting a close tag. + +@item C-c 8 +@kindex C-c 8 @r{(SGML mode)} +@findex sgml-name-8bit-mode +Toggle a minor mode in which Latin-1 characters insert the +corresponding SGML commands that stand for them, instead of the +characters themselves (@code{sgml-name-8bit-mode}). + +@item C-c C-v +@kindex C-c C-v @r{(SGML mode)} +@findex sgml-validate +Run a shell command (which you must specify) to validate the current +buffer as SGML (@code{sgml-validate}). + +@item C-c TAB +@kindex C-c TAB @r{(SGML mode)} +@findex sgml-tags-invisible +Toggle the visibility of existing tags in the buffer. This can be +used as a cheap preview. +@end table + +@vindex sgml-xml-mode + SGML mode and HTML mode support XML also. In XML, every opening tag +must have an explicit closing tag. When @code{sgml-xml-mode} is +non-@code{nil}, SGML mode and HTML mode always insert explicit +closing tags. When you visit a file, these modes determine from the +file contents whether it is XML or not, and set @code{sgml-xml-mode} +accordingly, so that they do the right thing for the file in either +case. + +@node Nroff Mode +@section Nroff Mode + +@cindex nroff +@findex nroff-mode + Nroff mode is a mode like Text mode but modified to handle nroff commands +present in the text. Invoke @kbd{M-x nroff-mode} to enter this mode. It +differs from Text mode in only a few ways. All nroff command lines are +considered paragraph separators, so that filling will never garble the +nroff commands. Pages are separated by @samp{.bp} commands. Comments +start with backslash-doublequote. Also, three special commands are +provided that are not in Text mode: + +@findex forward-text-line +@findex backward-text-line +@findex count-text-lines +@kindex M-n @r{(Nroff mode)} +@kindex M-p @r{(Nroff mode)} +@kindex M-? @r{(Nroff mode)} +@table @kbd +@item M-n +Move to the beginning of the next line that isn't an nroff command +(@code{forward-text-line}). An argument is a repeat count. +@item M-p +Like @kbd{M-n} but move up (@code{backward-text-line}). +@item M-? +Displays in the echo area the number of text lines (lines that are not +nroff commands) in the region (@code{count-text-lines}). +@end table + +@findex electric-nroff-mode + The other feature of Nroff mode is that you can turn on Electric Nroff +mode. This is a minor mode that you can turn on or off with @kbd{M-x +electric-nroff-mode} (@pxref{Minor Modes}). When the mode is on, each +time you use @key{RET} to end a line that contains an nroff command that +opens a kind of grouping, the matching nroff command to close that +grouping is automatically inserted on the following line. For example, +if you are at the beginning of a line and type @kbd{.@: ( b @key{RET}}, +this inserts the matching command @samp{.)b} on a new line following +point. + + If you use Outline minor mode with Nroff mode (@pxref{Outline Mode}), +heading lines are lines of the form @samp{.H} followed by a number (the +header level). + +@vindex nroff-mode-hook + Entering Nroff mode runs the hook @code{text-mode-hook}, followed by +the hook @code{nroff-mode-hook} (@pxref{Hooks}). + +@node Formatted Text +@section Editing Formatted Text + +@cindex Enriched mode +@cindex mode, Enriched +@cindex formatted text +@cindex WYSIWYG +@cindex word processing + @dfn{Enriched mode} is a minor mode for editing files that contain +formatted text in WYSIWYG fashion, as in a word processor. Currently, +formatted text in Enriched mode can specify fonts, colors, underlining, +margins, and types of filling and justification. In the future, we plan +to implement other formatting features as well. + + Enriched mode is a minor mode (@pxref{Minor Modes}). It is +typically used in conjunction with Text mode (@pxref{Text Mode}), but +you can also use it with other major modes such as Outline mode and +Paragraph-Indent Text mode. + +@cindex text/enriched MIME format + Potentially, Emacs can store formatted text files in various file +formats. Currently, only one format is implemented: @dfn{text/enriched} +format, which is defined by the MIME protocol. @xref{Format +Conversion,, Format Conversion, elisp, the Emacs Lisp Reference Manual}, +for details of how Emacs recognizes and converts file formats. + + The Emacs distribution contains a formatted text file that can serve as +an example. Its name is @file{etc/enriched.doc}. It contains samples +illustrating all the features described in this section. It also +contains a list of ideas for future enhancements. + +@menu +* Requesting Formatted Text:: Entering and exiting Enriched mode. +* Hard and Soft Newlines:: There are two different kinds of newlines. +* Editing Format Info:: How to edit text properties. +* Faces: Format Faces. Bold, italic, underline, etc. +* Color: Format Colors. Changing the color of text. +* Indent: Format Indentation. Changing the left and right margins. +* Justification: Format Justification. + Centering, setting text flush with the + left or right margin, etc. +* Other: Format Properties. The "special" text properties submenu. +* Forcing Enriched Mode:: How to force use of Enriched mode. +@end menu + +@node Requesting Formatted Text +@subsection Requesting to Edit Formatted Text + + Whenever you visit a file that Emacs saved in the text/enriched +format, Emacs automatically converts the formatting information in the +file into Emacs's own internal format (known as @dfn{text +properties}), and turns on Enriched mode. + +@findex enriched-mode + To create a new file of formatted text, first visit the nonexistent +file, then type @kbd{M-x enriched-mode} before you start inserting text. +This command turns on Enriched mode. Do this before you begin inserting +text, to ensure that the text you insert is handled properly. + + More generally, the command @code{enriched-mode} turns Enriched mode +on if it was off, and off if it was on. With a prefix argument, this +command turns Enriched mode on if the argument is positive, and turns +the mode off otherwise. + + When you save a buffer while Enriched mode is enabled in it, Emacs +automatically converts the text to text/enriched format while writing it +into the file. When you visit the file again, Emacs will automatically +recognize the format, reconvert the text, and turn on Enriched mode +again. + +@vindex enriched-translations + You can add annotations for saving additional text properties, which +Emacs normally does not save, by adding to @code{enriched-translations}. +Note that the text/enriched standard requires any non-standard +annotations to have names starting with @samp{x-}, as in +@samp{x-read-only}. This ensures that they will not conflict with +standard annotations that may be added later. + + @xref{Text Properties,,, elisp, the Emacs Lisp Reference Manual}, +for more information about text properties. + +@node Hard and Soft Newlines +@subsection Hard and Soft Newlines +@cindex hard newline +@cindex soft newline +@cindex newlines, hard and soft + +@cindex use-hard-newlines + In formatted text, Emacs distinguishes between two different kinds of +newlines, @dfn{hard} newlines and @dfn{soft} newlines. (You can enable +or disable this feature separately in any buffer with the command +@code{use-hard-newlines}.) + + Hard newlines are used to separate paragraphs, or items in a list, or +anywhere that there should always be a line break regardless of the +margins. The @key{RET} command (@code{newline}) and @kbd{C-o} +(@code{open-line}) insert hard newlines. + + Soft newlines are used to make text fit between the margins. All the +fill commands, including Auto Fill, insert soft newlines---and they +delete only soft newlines. + + Although hard and soft newlines look the same, it is important to bear +the difference in mind. Do not use @key{RET} to break lines in the +middle of filled paragraphs, or else you will get hard newlines that are +barriers to further filling. Instead, let Auto Fill mode break lines, +so that if the text or the margins change, Emacs can refill the lines +properly. @xref{Auto Fill}. + + On the other hand, in tables and lists, where the lines should always +remain as you type them, you can use @key{RET} to end lines. For these +lines, you may also want to set the justification style to +@code{unfilled}. @xref{Format Justification}. + +@node Editing Format Info +@subsection Editing Format Information + + There are two ways to alter the formatting information for a formatted +text file: with keyboard commands, and with the mouse. + + The easiest way to add properties to your document is with the Text +Properties menu. You can get to this menu in two ways: from the Edit +menu in the menu bar (use @kbd{@key{F10} e t} if you have no mouse), +or with @kbd{C-Mouse-2} (hold the @key{CTRL} key and press the middle +mouse button). There are also keyboard commands described in the +following section. + + Most of the items in the Text Properties menu lead to other submenus. +These are described in the sections that follow. Some items run +commands directly: + +@table @code +@findex facemenu-remove-face-props +@item Remove Face Properties +Delete from the region all face and color text properties +(@code{facemenu-remove-face-props}). + +@findex facemenu-remove-all +@item Remove Text Properties +Delete @emph{all} text properties from the region +(@code{facemenu-remove-all}). + +@findex describe-text-properties +@cindex text properties of characters +@cindex overlays at character position +@cindex widgets at buffer position +@cindex buttons at buffer position +@item Describe Properties +List all the text properties, widgets, buttons, and overlays of the +character following point (@code{describe-text-properties}). + +@item Display Faces +Display a list of all the defined faces (@code{list-faces-display}). + +@item Display Colors +Display a list of all the defined colors (@code{list-colors-display}). +@end table + +@node Format Faces +@subsection Faces in Formatted Text + + The Faces submenu lists various Emacs faces including @code{bold}, +@code{italic}, and @code{underline} (@pxref{Faces}). These menu items +operate on the region if it is active and nonempty. Otherwise, they +specify to use that face for an immediately following self-inserting +character. Instead of the menu, you can use these keyboard commands: + +@table @kbd +@kindex M-o d @r{(Enriched mode)} +@findex facemenu-set-default +@item M-o d +Remove all @code{face} properties from the region (which includes +specified colors), or force the following inserted character to have no +@code{face} property (@code{facemenu-set-default}). +@kindex M-o b @r{(Enriched mode)} +@findex facemenu-set-bold +@item M-o b +Add the face @code{bold} to the region or to the following inserted +character (@code{facemenu-set-bold}). +@kindex M-o i @r{(Enriched mode)} +@findex facemenu-set-italic +@item M-o i +Add the face @code{italic} to the region or to the following inserted +character (@code{facemenu-set-italic}). +@kindex M-o l @r{(Enriched mode)} +@findex facemenu-set-bold-italic +@item M-o l +Add the face @code{bold-italic} to the region or to the following +inserted character (@code{facemenu-set-bold-italic}). +@kindex M-o u @r{(Enriched mode)} +@findex facemenu-set-underline +@item M-o u +Add the face @code{underline} to the region or to the following inserted +character (@code{facemenu-set-underline}). +@kindex M-o o @r{(Enriched mode)} +@findex facemenu-set-face +@item M-o o @var{face} @key{RET} +Add the face @var{face} to the region or to the following inserted +character (@code{facemenu-set-face}). +@end table + + With a prefix argument, all these commands apply to an immediately +following self-inserting character, disregarding the region. + + A self-inserting character normally inherits the @code{face} +property (and most other text properties) from the preceding character +in the buffer. If you use the above commands to specify face for the +next self-inserting character, or the next section's commands to +specify a foreground or background color for it, then it does not +inherit the @code{face} property from the preceding character; instead +it uses whatever you specified. It will still inherit other text +properties, though. + + Strictly speaking, these commands apply only to the first following +self-inserting character that you type. But if you insert additional +characters after it, they will inherit from the first one. So it +appears that these commands apply to all of them. + + Enriched mode defines two additional faces: @code{excerpt} and +@code{fixed}. These correspond to codes used in the text/enriched file +format. + + The @code{excerpt} face is intended for quotations. This face is the +same as @code{italic} unless you customize it (@pxref{Face Customization}). + + The @code{fixed} face means, ``Use a fixed-width font for this part +of the text.'' Applying the @code{fixed} face to a part of the text +will cause that part of the text to appear in a fixed-width font, even +if the default font is variable-width. This applies to Emacs and to +other systems that display text/enriched format. So if you +specifically want a certain part of the text to use a fixed-width +font, you should specify the @code{fixed} face for that part. + + By default, the @code{fixed} face looks the same as @code{bold}. +This is an attempt to distinguish it from @code{default}. You may +wish to customize @code{fixed} to some other fixed-width medium font. +@xref{Face Customization}. + + If your terminal cannot display different faces, you will not be +able to see them, but you can still edit documents containing faces, +and even add faces and colors to documents. The faces you specify +will be visible when the file is viewed on a terminal that can display +them. + +@node Format Colors +@subsection Colors in Formatted Text + + You can specify foreground and background colors for portions of the +text. There is a menu for specifying the foreground color and a menu +for specifying the background color. Each color menu lists all the +colors that you have used in Enriched mode in the current Emacs session. + + If you specify a color with a prefix argument---or, in Transient +Mark mode, if the region is not active---then it applies to any +immediately following self-inserting input. Otherwise, the command +applies to the region. + + Each color menu contains one additional item: @samp{Other}. You can use +this item to specify a color that is not listed in the menu; it reads +the color name with the minibuffer. To display a list of available colors +and their names, use the @samp{Display Colors} menu item in the Text +Properties menu (@pxref{Editing Format Info}). + + Any color that you specify in this way, or that is mentioned in a +formatted text file that you read in, is added to the corresponding +color menu for the duration of the Emacs session. + +@findex facemenu-set-foreground +@findex facemenu-set-background + There are no predefined key bindings for specifying colors, but you can do so +with the extended commands @kbd{M-x facemenu-set-foreground} and +@kbd{M-x facemenu-set-background}. Both of these commands read the name +of the color with the minibuffer. + +@node Format Indentation +@subsection Indentation in Formatted Text + + When editing formatted text, you can specify different amounts of +indentation for the right or left margin of an entire paragraph or a +part of a paragraph. The margins you specify automatically affect the +Emacs fill commands (@pxref{Filling}) and line-breaking commands. + + The Indentation submenu provides a convenient interface for specifying +these properties. The submenu contains four items: + +@table @code +@kindex C-x TAB @r{(Enriched mode)} +@findex increase-left-margin +@item Indent More +Indent the region by 4 columns (@code{increase-left-margin}). In +Enriched mode, this command is also available on @kbd{C-x @key{TAB}}; if +you supply a numeric argument, that says how many columns to add to the +margin (a negative argument reduces the number of columns). + +@item Indent Less +Remove 4 columns of indentation from the region. + +@item Indent Right More +Make the text narrower by indenting 4 columns at the right margin. + +@item Indent Right Less +Remove 4 columns of indentation from the right margin. +@end table + + You can use these commands repeatedly to increase or decrease the +indentation. + + The most common way to use them is to change the indentation of an +entire paragraph. For other uses, the effects of refilling can be +hard to predict, except in some special cases like the one described +next. + + The most common other use is to format paragraphs with @dfn{hanging +indents}, which means that the first line is indented less than +subsequent lines. To set up a hanging indent, increase the +indentation of the region starting after the first word of the +paragraph and running until the end of the paragraph. + + Indenting the first line of a paragraph is easier. Set the margin for +the whole paragraph where you want it to be for the body of the +paragraph, then indent the first line by inserting extra spaces or tabs. + +@vindex standard-indent + The variable @code{standard-indent} specifies how many columns these +commands should add to or subtract from the indentation. The default +value is 4. The overall default right margin for Enriched mode is +controlled by the variable @code{fill-column}, as usual. + +@kindex C-c [ @r{(Enriched mode)} +@kindex C-c ] @r{(Enriched mode)} +@findex set-left-margin +@findex set-right-margin + There are also two commands for setting the left or right margin of +the region absolutely: @code{set-left-margin} and +@code{set-right-margin}. Enriched mode binds these commands to +@kbd{C-c [} and @kbd{C-c ]}, respectively. You can specify the +margin width either with a numeric argument or in the minibuffer. + + Sometimes, as a result of editing, the filling of a paragraph becomes +messed up---parts of the paragraph may extend past the left or right +margins. When this happens, use @kbd{M-q} (@code{fill-paragraph}) to +refill the paragraph. + + The fill prefix, if any, works in addition to the specified paragraph +indentation: @kbd{C-x .} does not include the specified indentation's +whitespace in the new value for the fill prefix, and the fill commands +look for the fill prefix after the indentation on each line. @xref{Fill +Prefix}. + +@node Format Justification +@subsection Justification in Formatted Text + + When editing formatted text, you can specify various styles of +justification for a paragraph. The style you specify automatically +affects the Emacs fill commands. + + The Justification submenu provides a convenient interface for specifying +the style. The submenu contains five items: + +@table @code +@item Left +This is the most common style of justification (at least for English). +Lines are aligned at the left margin but left uneven at the right. + +@item Right +This aligns each line with the right margin. Spaces and tabs are added +on the left, if necessary, to make lines line up on the right. + +@item Full +This justifies the text, aligning both edges of each line. Justified +text looks very nice in a printed book, where the spaces can all be +adjusted equally, but it does not look as nice with a fixed-width font +on the screen. Perhaps a future version of Emacs will be able to adjust +the width of spaces in a line to achieve elegant justification. + +@item Center +This centers every line between the current margins. + +@item Unfilled +This turns off filling entirely. Each line will remain as you wrote it; +the fill and auto-fill functions will have no effect on text which has +this setting. You can, however, still indent the left margin. In +unfilled regions, all newlines are treated as hard newlines (@pxref{Hard +and Soft Newlines}) . +@end table + + In Enriched mode, you can also specify justification from the keyboard +using the @kbd{M-j} prefix character: + +@table @kbd +@kindex M-j l @r{(Enriched mode)} +@findex set-justification-left +@item M-j l +Make the region left-filled (@code{set-justification-left}). +@kindex M-j r @r{(Enriched mode)} +@findex set-justification-right +@item M-j r +Make the region right-filled (@code{set-justification-right}). +@kindex M-j b @r{(Enriched mode)} +@findex set-justification-full +@item M-j b +Make the region fully justified (@code{set-justification-full}). +@kindex M-j c @r{(Enriched mode)} +@kindex M-S @r{(Enriched mode)} +@findex set-justification-center +@item M-j c +@itemx M-S +Make the region centered (@code{set-justification-center}). +@kindex M-j u @r{(Enriched mode)} +@findex set-justification-none +@item M-j u +Make the region unfilled (@code{set-justification-none}). +@end table + + Justification styles apply to entire paragraphs. All the +justification-changing commands operate on the paragraph containing +point, or, if the region is active, on all paragraphs which overlap the +region. + +@vindex default-justification + The default justification style is specified by the variable +@code{default-justification}. Its value should be one of the symbols +@code{left}, @code{right}, @code{full}, @code{center}, or @code{none}. +This is a per-buffer variable. Setting the variable directly affects +only the current buffer. However, customizing it in a Custom buffer +sets (as always) the default value for buffers that do not override it. +@xref{Locals}, and @ref{Easy Customization}. + +@node Format Properties +@subsection Setting Other Text Properties + + The Special Properties menu lets you add or remove three other useful text +properties: @code{read-only}, @code{invisible} and @code{intangible}. +The @code{intangible} property disallows moving point within the text, +the @code{invisible} text property hides text from display, and the +@code{read-only} property disallows alteration of the text. + + Each of these special properties has a menu item to add it to the +region. The last menu item, @samp{Remove Special}, removes all of these +special properties from the text in the region. + + Currently, the @code{invisible} and @code{intangible} properties are +@emph{not} saved in the text/enriched format. The @code{read-only} +property is saved, but it is not a standard part of the text/enriched +format, so other editors may not respect it. + +@node Forcing Enriched Mode +@subsection Forcing Enriched Mode + + Normally, Emacs knows when you are editing formatted text because it +recognizes the special annotations used in the file that you visited. +However, sometimes you must take special actions to convert file +contents or turn on Enriched mode: + +@itemize @bullet +@item +When you visit a file that was created with some other editor, Emacs may +not recognize the file as being in the text/enriched format. In this +case, when you visit the file you will see the formatting commands +rather than the formatted text. Type @kbd{M-x format-decode-buffer} to +translate it. This also automatically turns on Enriched mode. + +@item +When you @emph{insert} a file into a buffer, rather than visiting it, +Emacs does the necessary conversions on the text which you insert, but +it does not enable Enriched mode. If you wish to do that, type @kbd{M-x +enriched-mode}. +@end itemize + + The command @code{format-decode-buffer} translates text in various +formats into Emacs's internal format. It asks you to specify the format +to translate from; however, normally you can type just @key{RET}, which +tells Emacs to guess the format. + +@findex format-find-file + If you wish to look at a text/enriched file in its raw form, as a +sequence of characters rather than as formatted text, use the @kbd{M-x +find-file-literally} command. This visits a file, like +@code{find-file}, but does not do format conversion. It also inhibits +character code conversion (@pxref{Coding Systems}) and automatic +uncompression (@pxref{Compressed Files}). To disable format conversion +but allow character code conversion and/or automatic uncompression if +appropriate, use @code{format-find-file} with suitable arguments. + +@node Text Based Tables +@section Editing Text-based Tables +@cindex table mode +@cindex text-based tables + + Table mode provides an easy and intuitive way to create and edit WYSIWYG +text-based tables. Here is an example of such a table: + +@smallexample +@group ++-----------------+--------------------------------+-----------------+ +| Command | Description | Key Binding | ++-----------------+--------------------------------+-----------------+ +| forward-char |Move point right N characters | C-f | +| |(left if N is negative). | | +| | | | +| |On reaching end of buffer, stop | | +| |and signal error. | | ++-----------------+--------------------------------+-----------------+ +| backward-char |Move point left N characters | C-b | +| |(right if N is negative). | | +| | | | +| |On attempt to pass beginning or | | +| |end of buffer, stop and signal | | +| |error. | | ++-----------------+--------------------------------+-----------------+ +@end group +@end smallexample + + Table mode allows the contents of the table such as this one to be +easily manipulated by inserting or deleting characters inside a cell. +A cell is effectively a localized rectangular edit region and edits to +a cell do not affect the contents of the surrounding cells. If the +contents do not fit into a cell, then the cell is automatically +expanded in the vertical and/or horizontal directions and the rest of +the table is restructured and reformatted in accordance with the +growth of the cell. + +@menu +* Table Definition:: What is a text based table. +* Table Creation:: How to create a table. +* Table Recognition:: How to activate and deactivate tables. +* Cell Commands:: Cell-oriented commands in a table. +* Cell Justification:: Justifying cell contents. +* Row Commands:: Manipulating rows of table cell. +* Column Commands:: Manipulating columns of table cell. +* Fixed Width Mode:: Fixing cell width. +* Table Conversion:: Converting between plain text and tables. +* Measuring Tables:: Analyzing table dimension. +* Table Misc:: Table miscellany. +@end menu + +@node Table Definition +@subsection What is a Text-based Table? + + Keep the following examples of valid tables in mind as a reference +while you read this section: + +@example + +--+----+---+ +-+ +--+-----+ + | | | | | | | | | + +--+----+---+ +-+ | +--+--+ + | | | | | | | | + +--+----+---+ +--+--+ | + | | | + +-----+--+ +@end example + + A table consists of a rectangular frame whose inside is divided into +cells. Each cell must be at least one character wide and one +character high, not counting its border lines. A cell can be +subdivided into multiple rectangular cells, but cells cannot overlap. + + The table frame and cell border lines are made of three special +characters. These variables specify those characters: + +@table @code +@vindex table-cell-vertical-char +@item table-cell-vertical-char +Holds the character used for vertical lines. The default value is +@samp{|}. + +@vindex table-cell-horizontal-char +@item table-cell-horizontal-char +Holds the character used for horizontal lines. The default value is +@samp{-}. + +@vindex table-cell-intersection-char +@item table-cell-intersection-char +Holds the character used at where horizontal line and vertical line +meet. The default value is @samp{+}. +@end table + +@noindent +Based on this definition, the following five tables are examples of invalid +tables: + +@example + +-----+ +-----+ +--+ +-++--+ ++ + | | | | | | | || | ++ + | +-+ | | | | | | || | + | | | | +--+ | +--+--+ +-++--+ + | +-+ | | | | | | | +-++--+ + | | | | | | | | | || | + +-----+ +--+--+ +--+--+ +-++--+ + a b c d e +@end example + +From left to right: + +@enumerate a +@item +Overlapped cells or non-rectangular cells are not allowed. +@item +Same as a. +@item +The border must be rectangular. +@item +Cells must have a minimum width/height of one character. +@item +Same as d. +@end enumerate + +@node Table Creation +@subsection How to Create a Table? +@cindex create a text-based table +@cindex table creation + +@findex table-insert + The command to create a table is @code{table-insert}. When called +interactively, it asks for the number of columns, number of rows, cell +width and cell height. The number of columns is the number of cells +horizontally side by side. The number of rows is the number of cells +vertically within the table's height. The cell width is a number of +characters that each cell holds, left to right. The cell height is a +number of lines each cell holds. The cell width and the cell height +can be either an integer (when the value is constant across the table) +or a series of integer, separated by spaces or commas, where each +number corresponds to the next cell within a row from left to right, +or the next cell within a column from top to bottom. + +@node Table Recognition +@subsection Table Recognition +@cindex table recognition + +@findex table-recognize +@findex table-unrecognize + Table mode maintains special text properties in the buffer to allow +editing in a convenient fashion. When a buffer with tables is saved +to its file, these text properties are lost, so when you visit this +file again later, Emacs does not see a table, but just formatted text. +To resurrect the table text properties, issue the @kbd{M-x +table-recognize} command. It scans the current buffer, recognizes +valid table cells, and attaches appropriate text properties to allow +for table editing. The converse command, @code{table-unrecognize}, is +used to remove the special text properties and convert the buffer back +to plain text. + + Special commands exist to enable or disable tables within a region, +enable or disable individual tables, and enable/disable individual +cells. These commands are: + +@table @kbd +@findex table-recognize-region +@item M-x table-recognize-region +Recognize tables within the current region and activate them. +@findex table-unrecognize-region +@item M-x table-unrecognize-region +Deactivate tables within the current region. +@findex table-recognize-table +@item M-x table-recognize-table +Recognize the table under point and activate it. +@findex table-unrecognize-table +@item M-x table-unrecognize-table +Deactivate the table under point. +@findex table-recognize-cell +@item M-x table-recognize-cell +Recognize the cell under point and activate it. +@findex table-unrecognize-cell +@item M-x table-unrecognize-cell +Deactivate the cell under point. +@end table + + For another way of converting text into tables, see @ref{Table +Conversion}. + +@node Cell Commands +@subsection Commands for Table Cells + +@findex table-forward-cell +@findex table-backward-cell + The commands @code{table-forward-cell} and +@code{table-backward-cell} move point from the current cell to an +adjacent cell forward and backward respectively. The order of the +cells is cyclic: when point is in the last cell of a table, typing +@kbd{M-x table-forward-cell} moves to the first cell in the table. +Likewise @kbd{M-x table-backward-cell} from the first cell in a table +moves to the last cell. + +@findex table-span-cell + The command @code{table-span-cell} merges the current cell with the +adjacent cell in a specified direction---right, left, above or below. +You specify the direction with the minibuffer. It does not allow +merges which don't result in a legitimate cell layout. + +@findex table-split-cell +@cindex text-based tables, split a cell +@cindex split table cell + The command @code{table-split-cell} splits the current cell +vertically or horizontally. This command is a wrapper to the +direction specific commands @code{table-split-cell-vertically} and +@code{table-split-cell-horizontally}. You specify the direction with +a minibuffer argument. + +@findex table-split-cell-vertically + The command @code{table-split-cell-vertically} splits the current +cell vertically and creates a pair of cells above and below where +point is located. The content in the original cell is split as well. + +@findex table-split-cell-horizontally + The command @code{table-split-cell-horizontally} splits the current +cell horizontally and creates a pair of cells right and left of where +point is located. If the cell being split is not empty, this asks you +how to handle the cell contents. The three options are: @code{split}, +@code{left}, or @code{right}. @code{split} splits the contents at +point literally, while the @code{left} and @code{right} options move +the entire contents into the left or right cell respectively. + +@cindex enlarge a table cell +@cindex shrink a table cell + The next four commands enlarge or shrink a cell. They use numeric +arguments (@pxref{Arguments}) to specify how many columns or rows to +enlarge or shrink a particular table. + +@table @kbd +@findex table-heighten-cell +@item M-x table-heighten-cell +Enlarge the current cell vertically. +@findex table-shorten-cell +@item M-x table-shorten-cell +Shrink the current cell vertically. +@findex table-widen-cell +@item M-x table-widen-cell +Enlarge the current cell horizontally. +@findex table-narrow-cell +@item M-x table-narrow-cell +Shrink the current cell horizontally. +@end table + +@node Cell Justification +@subsection Cell Justification +@cindex cell text justification + + You can specify text justification for each cell. The justification +is remembered independently for each cell and the subsequent editing +of cell contents is subject to the specified justification. + +@findex table-justify + The command @code{table-justify} ask you to specify what to justify: +a cell, a column, or a row. If you select cell justification, this +command sets the justification only for the current cell. Selecting +column or row justification sets the justification for all the cells +within a column or row respectively. The command then ask you which +kind of justification to apply: @code{left}, @code{center}, +@code{right}, @code{top}, @code{middle}, @code{bottom}, or +@code{none}. Horizontal justification and vertical justification are +specified independently. The options @code{left}, @code{center}, and +@code{right} specify horizontal justification while the options +@code{top}, @code{middle}, @code{bottom}, and @code{none} specify +vertical justification. The vertical justification @code{none} +effectively removes vertical justification. Horizontal justification +must be one of @code{left}, @code{center}, or @code{right}. + +@vindex table-detect-cell-alignment + Justification information is stored in the buffer as a part of text +property. Therefore, this information is ephemeral and does not +survive through the loss of the buffer (closing the buffer and +revisiting the buffer erase any previous text properties). To +countermand for this, the command @code{table-recognize} and other +recognition commands (@pxref{Table Recognition}) are equipped with a +convenience feature (turned on by default). During table recognition, +the contents of a cell are examined to determine which justification +was originally applied to the cell and then applies this justification +to the cell. This is a speculative algorithm and is therefore not +perfect, however, the justification is deduced correctly most of the +time. To disable this feature, customize the variable +@code{table-detect-cell-alignment} and set it to @code{nil}. + +@node Row Commands +@subsection Commands for Table Rows +@cindex table row commands + +@cindex insert row in table +@findex table-insert-row + The command @code{table-insert-row} inserts a row of cells before +the current row in a table. The current row where point is located is +pushed down after the newly inserted row. A numeric prefix argument +specifies the number of rows to insert. Note that in order to insert +rows @emph{after} the last row at the bottom of a table, you must +place point below the table---that is, outside the table---prior to +invoking this command. + +@cindex delete row in table +@findex table-delete-row + The command @code{table-delete-row} deletes a row of cells at point. +A numeric prefix argument specifies the number of rows to delete. + +@node Column Commands +@subsection Commands for Table Columns +@cindex table column commands + +@cindex insert column in table +@findex table-insert-column + The command @code{table-insert-column} inserts a column of cells to +the left of the current row in a table. This pushes the current +column to the right. To insert a column to the right side of the +rightmost column, place point to the right of the rightmost column, +which is outside of the table, prior to invoking this command. A +numeric prefix argument specifies the number of columns to insert. + +@cindex delete column in table + A command @code{table-delete-column} deletes a column of cells at +point. A numeric prefix argument specifies the number of columns to +delete. + +@node Fixed Width Mode +@subsection Fix Width of Cells +@cindex fix width of table cells + +@findex table-fixed-width-mode + The command @code{table-fixed-width-mode} toggles fixed width mode +on and off. When fixed width mode is turned on, editing inside a +cell never changes the cell width; when it is off, the cell width +expands automatically in order to prevent a word from being folded +into multiple lines. By default, fixed width mode is disabled. + +@node Table Conversion +@subsection Conversion Between Plain Text and Tables +@cindex text to table +@cindex table to text + +@findex table-capture + The command @code{table-capture} captures plain text in a region and +turns it into a table. Unlike @code{table-recognize} (@pxref{Table +Recognition}), the original text does not have a table appearance but +may hold a logical table structure. For example, some elements +separated by known patterns form a two dimensional structure which can +be turned into a table. + + Here's an example of data that @code{table-capture} can operate on. +The numbers are horizontally separated by a comma and vertically +separated by a newline character. + +@example +1, 2, 3, 4 +5, 6, 7, 8 +, 9, 10 +@end example + +@noindent +Invoking @kbd{M-x table-capture} on that text produces this table: + +@example ++-----+-----+-----+-----+ +|1 |2 |3 |4 | ++-----+-----+-----+-----+ +|5 |6 |7 |8 | ++-----+-----+-----+-----+ +| |9 |10 | | ++-----+-----+-----+-----+ +@end example + +@noindent +The conversion uses @samp{,} for the column delimiter and newline for +a row delimiter, cells are left justified, and minimum cell width is +5. + +@findex table-release + The command @code{table-release} does the opposite of +@code{table-capture}. It releases a table by removing the table frame +and cell borders. This leaves the table contents as plain text. One +of the useful applications of @code{table-capture} and +@code{table-release} is to edit a text in layout. Look at the +following three paragraphs (the latter two are indented with header +lines): + +@example +@samp{table-capture} is a powerful command, but mastering its +power requires some practice. Here are some things it can do: + +Parse Cell Items By using column delimiter regular + expression and raw delimiter regular + expression, it parses the specified text + area and extracts cell items from + non-table text and then forms a table out + of them. + +Capture Text Area When no delimiters are specified it + creates a single cell table. The text in + the specified region is placed in that + cell. +@end example + +@noindent +Applying @code{table-capture} to a region containing the above three +paragraphs, with empty strings for column delimiter regexp and row +delimiter regexp, creates a table with a single cell like the +following one. + +@c The first line's right-hand frame in the following two examples +@c sticks out to accommodate for the removal of @samp in the +@c produced output!! +@smallexample +@group ++-----------------------------------------------------------------+ +|@samp{table-capture} is a powerful command, but mastering its | +|power requires some practice. Here are some things it can do: | +| | +|Parse Cell Items By using column delimiter regular | +| expression and raw delimiter regular | +| expression, it parses the specified text | +| area and extracts cell items from | +| non-table text and then forms a table out | +| of them. | +| | +|Capture Text Area When no delimiters are specified it | +| creates a single cell table. The text in | +| the specified region is placed in that | +| cell. | ++-----------------------------------------------------------------+ +@end group +@end smallexample + +@noindent +By splitting the cell appropriately we now have a table consisting of +paragraphs occupying its own cell. Each cell can now be edited +independently without affecting the layout of other cells. + +@smallexample ++-----------------------------------------------------------------+ +|@samp{table-capture} is a powerful command, but mastering its | +|power requires some practice. Here are some things it can do: | ++---------------------+-------------------------------------------+ +|Parse Cell Items |By using column delimiter regular | +| |expression and raw delimiter regular | +| |expression, it parses the specified text | +| |area and extracts cell items from | +| |non-table text and then forms a table out | +| |of them. | ++---------------------+-------------------------------------------+ +|Capture Text Area |When no delimiters are specified it | +| |creates a single cell table. The text in | +| |the specified region is placed in that | +| |cell. | ++---------------------+-------------------------------------------+ +@end smallexample + +@noindent +By applying @code{table-release}, which does the opposite process, the +contents become once again plain text. @code{table-release} works as +a companion command to @code{table-capture}. + +@node Measuring Tables +@subsection Analyzing Table Dimensions +@cindex table dimensions + +@findex table-query-dimension + The command @code{table-query-dimension} analyzes a table structure +and reports information regarding its dimensions. In case of the +above example table, the @code{table-query-dimension} command displays +in echo area: + +@smallexample +Cell: (21w, 6h), Table: (67w, 16h), Dim: (2c, 3r), Total Cells: 5 +@end smallexample + +@noindent +This indicates that the current cell is 21 character wide and 6 lines +high, the entire table is 67 characters wide and 16 lines high. The +table has 2 columns and 3 rows. It has a total of 5 cells, since the +first row has a spanned cell. + +@node Table Misc +@subsection Table Miscellany + +@cindex insert string into table cells +@findex table-insert-sequence + The command @code{table-insert-sequence} inserts a string into each +cell. Each string is a part of a sequence i.e.@: a series of +increasing integer numbers. + +@cindex table in language format +@cindex table for HTML and LaTeX +@findex table-generate-source + The command @code{table-generate-source} generates a table formatted +for a specific markup language. It asks for a language (which must be +one of @code{html}, @code{latex}, or @code{cals}), a destination +buffer where to put the result, and the table caption (a string), and +then inserts the generated table in the proper syntax into the +destination buffer. The default destination buffer is +@code{table.@var{lang}}, where @var{lang} is the language you +specified. + +@ignore + arch-tag: 8db54ed8-2036-49ca-b0df-23811d03dc70 +@end ignore