# HG changeset patch # User Karl Heuer # Date 898276227 0 # Node ID bbf2827a935638ac82075f29008e1438302b978a # Parent 6c1c72f0145be822877962ece0b71953bc887499 Initial revision diff -r 6c1c72f0145b -r bbf2827a9356 lisp/mail/feedmail.el --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/lisp/mail/feedmail.el Fri Jun 19 17:10:27 1998 +0000 @@ -0,0 +1,2647 @@ +;;; feedmail.el --- assist other email packages to massage outgoing messages +;;; A replacement for parts of GNUemacs' sendmail.el (specifically, +;;; it's what handles your outgoing mail after you hit C-c C-c in mail +;;; mode). See below for a list of additional features, including the +;;; ability to queue messages for later sending. If you are using +;;; fakemail as a subprocess, you can switch to feedmail and eliminate +;;; the use of fakemail. feedmail works with recent versions of +;;; GNUemacs (mostly, but not exclusively, tested against 19.34 on +;;; Win95; some testing on 20.x) and XEmacs (tested with 20.4 and +;;; later betas). It probably no longer works with GNUemacs v18, +;;; though I haven't tried that in a long time. Sorry, no manual yet +;;; in this release. Look for one with the next release. + +;; As far as I'm concerned, anyone can do anything they want with +;; this specific piece of code. No warranty or promise of support is +;; offered. This code is hereby released into the public domain. + +;; Author: Bill Carpenter , +;; Version: 8 +;; Keywords: email, queue, mail, sendmail, message, spray, smtp, draft +;; Where: +;; Thanks: My thanks to the many people who have sent me suggestions +;; and fixes over time, as well as those who have tested many beta +;; iterations. Some are cited in comments in code fragments below, +;; but that doesn't correlate well with the list of folks who have +;; actually helped me along the way. + +;;; Commentary: +;; +;; If you use feedmail, I invite you to send me some email about it. +;; I appreciate feedback about problems you find or suggestions for +;; improvements or added features (even though I can't predict when +;; I'll incorporate changes). It's also OK with me if you send me a +;; note along the lines of "I use feedmail and find it useful" or "I +;; tried feedmail and didn't find it useful, so I stopped using it". +;; +;; It is most useful, when sending a bug report, if you tell me what +;; version of emacs you are using, what version of feedmail you are +;; using, and what versions of other email-related elisp packages you +;; are using. If in doubt about any of that, send the bug report +;; anyhow. +;; +;; ===== +;; A NOTE TO THOSE WHO WOULD CHANGE THIS CODE... Since it is PD, +;; you're within your rights to do whatever you want. If you do +;; publish a new version with your changes in it, please (1) insert +;; lisp comments describing the changes, (2) insert lisp comments +;; that clearly delimit where your changes are, (3) email me a copy +;; (I can't always consistently follow the relevant usenet groups), +;; and (4) use a version number that is based on the version you're +;; changing along with something that indicates you changed it. For +;; example, +;; +;; (defconst feedmail-patch-level "123") +;; (defconst feedmail-patch-level "123-XYZ-mods") +;; +;; The point of the last item, of course, is to try to minimize +;; confusion. Odds are good that if your idea makes sense to me that +;; it will show up in some future version of feedmail, though it's +;; hard to say when releases will tumble out. +;; ===== +;; +;; This file requires the mail-utils library. +;; +;; This file requires the smtpmail library if you use +;; feedmail-buffer-to-smtpmail. +;; +;; This file requires the custom library. Unfortunately, there are +;; two incompatible versions of the custom library. If you don't have +;; custom or you have the old version, this file will still load and +;; work properly. If you don't know what custom is all about and want +;; to edit your user option elisp variables the old fashioned way, +;; just imagine that all the "defcustom" stuff you see below is really +;; "defvar", and ignore everthing else. For info about custom, see +;; . +;; +;; This code does in elisp a superset of the stuff that used to be done +;; by the separate program "fakemail" for processing outbound email. +;; In other words, it takes over after you hit "C-c C-c" in mail mode. +;; By appropriate setting of options, you can still use "fakemail", +;; or you can even revert to sendmail (which is not too popular +;; locally). See the variables at the top of the elisp for how to +;; achieve these effects (there are more features than in this bullet +;; list, so trolling through the variable and function doc strings may +;; be worth your while): +;; +;; --- you can park outgoing messages into a disk-based queue and +;; stimulate sending them all later (handy for laptop users); +;; there is also a queue for draft messages +;; +;; --- you can get one last look at the prepped outbound message and +;; be prompted for confirmation +;; +;; --- removes BCC:/RESENT-BCC: headers after getting address info +;; +;; --- does smart filling of address headers +;; +;; --- calls a routine to process FCC: lines and removes them +;; +;; --- empty headers are removed +;; +;; --- can force FROM: or SENDER: line +;; +;; --- can generate a MESSAGE-ID: line +;; +;; --- can generate a DATE: line; the date can be the time the +;; message was written or the time it is being sent +;; +;; --- strips comments from address info (both "()" and "<>" are +;; handled via a call to mail-strip-quoted-names); the +;; comments are stripped in the simplified address list given +;; to a subprocess, not in the headers in the mail itself +;; (they are left unchanged, modulo smart filling) +;; +;; --- error info is pumped into a normal buffer instead of the +;; minibuffer +;; +;; --- just before the optional prompt for confirmation, lets you +;; run a hook on the prepped message and simplified address +;; list +;; +;; --- you can specify something other than /bin/mail for the +;; subprocess +;; +;; --- you can generate/modify an X-MAILER: message header +;; +;; After a long list of options below, you will find the function +;; feedmail-send-it. Hers's the best way to use the stuff in this +;; file: +;; +;; Save this file as feedmail.el somewhere on your elisp +;; loadpath; byte-compile it. Put the following lines somewhere in +;; your ~/.emacs stuff: +;; +;; (setq send-mail-function 'feedmail-send-it) +;; (autoload 'feedmail-send-it "feedmail") +;; +;; If you plan to use the queue stuff, also use this: +;; +;; (setq feedmail-enable-queue t) +;; (autoload 'feedmail-run-the-queue "feedmail") +;; (autoload 'feedmail-run-the-queue-no-prompts "feedmail") +;; (setq auto-mode-alist (cons '("\\.fqm$" . mail-mode) auto-mode-alist)) +;; +;; If you are using the desktop.el library to restore your sessions, you might +;; like to add the suffix ".fqm" to the list of non-saved things via the variable +;; desktop-files-not-to-save. +;; +;; If you are planning to call feedmail-queue-reminder from your .emacs or +;; something similar, you might need this: +;; +;; (autoload 'feedmail-queue-reminder "feedmail") +;; +;; If you ever use rmail-resend and queue messages, you should do this: +;; +;; (setq feedmail-queue-alternative-mail-header-separator "") +;; +;; If you want to automatically spell-check messages, but not when sending +;; them from the queue, you could do something like this: +;; +;; (autoload 'feedmail-mail-send-hook-splitter "feedmail") +;; (add-hook 'mail-send-hook 'feedmail-mail-send-hook-splitter) +;; (add-hook 'feedmail-mail-send-hook 'ispell-message) +;; +;; If you are using message-mode to compose and send mail, feedmail will +;; probably work fine with that (someone else tested it and told me it worked). +;; Follow the directions above, but make these adjustments instead: +;; +;; (setq message-send-mail-function 'feedmail-send-it) +;; (add-hook 'message-mail-send-hook 'feedmail-mail-send-hook-splitter) +;; +;; I think the LCD is no longer being updated, but if it were, this +;; would be a proper LCD record. There is an old version of +;; feedmail.el in the LCD archive. It works but is missing a lot of +;; features. +;; +;; LCD record: +;; feedmail|Bill Carpenter|bill@bubblegum.net,bill@carpenter.ORG|Outbound mail queue handling|98-06-15|8|feedmail.el +;; +;; Change log: +;; original, 31 March 1991 +;; patchlevel 1, 5 April 1991 +;; patchlevel 2, 24 May 1991 +;; 5-may-92 jwz Conditionalized calling expand-mail-aliases, since that +;; function doesn't exist in Lucid GNU Emacs or when using +;; mail-abbrevs.el. +;; patchlevel 3, 3 October 1996 +;; added queue stuff; still works in v18 +;; patchlevel 4, issued by someone else +;; patchlevel 5, issued by someone else +;; patchlevel 6, not issued as far as I know +;; patchlevel 7, 20 May 1997 +;; abandon futile support of GNUemacs v18 (sorry if that hurts you) +;; provide a DATE: header by default +;; provide a default for generating MESSAGE-ID: header contents +;; and use it by default (slightly changed API) +;; return value from feedmail-run-the-queue +;; new wrapper function feedmail-run-the-queue-no-prompts +;; user-mail-address as default for FROM: +;; properly deal with RESENT-{TO,CC,BCC} +;; BCC and RESENT-* now included in smart filling +;; limited support for a "drafts" directory +;; user-configurable default message action +;; allow timeout for confirmation prompt (where available) +;; move FCC handling to as late as possible to get max +;; header munging in the saved file +;; work around sendmail.el's prompts when working from queue +;; more reliably detect voluntary user bailouts +;; offer to save modified buffers visiting queue files +;; offer to delete old file copies of messages being queued +;; offer to delete queue files when sending immediately +;; queue filename convention preserves queue order +;; default queue and draft directory names that work on VMS +;; deduced address list now really a list, not a string (API change) +;; no more address buffer +;; when sending immediately, brief reminder of queue/draft counts +;; copy trace of smtpmail stuff to feedmail error buffer on no-go +;; more granularity on when to confirm sending +;; pause a bit for errors while running queue +;; try to clean up some pesky auto-save files from the +;; queue/draft directories +;; feedmail-force-expand-mail-aliases in case you can't figure +;; any other way +;; cleanup some of my sloppiness about case-fold-search (a strange +;; variable) +;; best effort following coding conventions from GNUemacs +;; elisp manual appendix +;; "customize" (see custom.el) +;; when user selects "immediate send", clear action prompt since +;; hooks may take a while to operate, and user may think the +;; response didn't take +;; fixes to the argument conventions for the +;; feedmail-queue-runner-* functions; allows +;; feedmail-run-the-queue[-no-prompts] to properly be called +;; non-interactively +;; eliminate reliance on directory-sep-char and feedmail-sep-thing +;; tweak smart filling (reminded of comma problem by levitte@lp.se) +;; option to control writing in text vs binary mode +aqq2;; patchlevel 8, 15 June 1998 +;; reliable re-editing of text-mode (vs binary) queued messages +;; user option to keep BCC: in FCC: copy (keep by default) +;; user option to delete body from FCC: copy (keep by default) +;; feedmail-deduce-bcc-where for envelope (API change for +;; feedmail-deduce-address list) +;; feedmail-queue-alternative-mail-header-separator +;; at message action prompt, "I"/"S" bypass message confirmation prompt +;; feedmail-mail-send-hook-splitter, feedmail-mail-send-hook, +;; feedmail-mail-send-hook-queued +;; user can supply stuff for message action prompt +;; variable feedmail-queue-runner-confirm-global, function feedmail-run-the-queue-global-prompt +;; bugfix: absolute argument to directory-files (tracked down for me +;; by gray@austin.apc.slb.com (Douglas Gray Stephens)); relative +;; pathnames can tickle stuff in ange-ftp remote directories +;; (perhaps because feedmail is careless about its working +;; directory) +;; feedmail-deduce-envelope-from +;; always supply envelope "from" (user-mail-address) to sendmail +;; feedmail-message-id-suffix +;; feedmail-queue-reminder, feedmail-queue-reminder-alist (after suggestions +;; and/or code fragments from tonyl@Eng.Sun.COM (Tony Lam) and +;; burge@newvision.com (Shane Burgess); bumped up the default value of +;; feedmail-queue-chatty-sit-for since info is more complex sometimes +;; feedmail-enable-spray (individual transmissions, crude mailmerge) +;; blank SUBJECT: no longer a special case; see feedmail-nuke-empty-headers +;; fiddle-plexes data structure used lots of places; see feedmail-fiddle-plex-blurb +;; feedmail-fiddle-plex-user-list +;; feedmail-is-a-resend +;; honor mail-from-style in constructing default for feedmail-from-line +;; re-implement feedmail-from-line and feedmail-sender-line with +;; fiddle-plexes; slightly modified semantics for feedmail-sender-line +;; feedmail-queue-default-file-slug; tidy up some other slug details +;; feedmail-queue-auto-file-nuke +;; feedmail-queue-express-to-queue and feedmail-queue-express-to-draft +;; strong versions of "q"ueue and "d"raft answers (always make a new file) +;; +;; todo (probably in patchlevel 9): +;; write texinfo manual +;; maybe partition into multiple files, including files of examples +;; +;;; Code: + +(defconst feedmail-patch-level "8") + + +;; from : +;; If you write software that must work without the new custom, you +;; can use this hack stolen from w3-cus.el: +(eval-and-compile + (condition-case () + (require 'custom) + (error nil)) + (if (and (featurep 'custom) (fboundp 'custom-declare-variable)) + nil ;; We've got what we needed + ;; We have the old custom-library, hack around it! + (defmacro defgroup (&rest args) + nil) + (defmacro defcustom (var value doc &rest args) + (` (defvar (, var) (, value) (, doc)))))) + + +(defgroup feedmail nil + "Assist other email packages to massage outgoing messages." + :group 'mail) + +(defgroup feedmail-misc nil + "Miscellaneous feedmail options that don't fit in other groups." + :group 'feedmail) + +(defgroup feedmail-headers nil + "Options related to manipulating specific headers or types of headers." + :group 'feedmail) + +(defgroup feedmail-queue nil + "Options related to queuing messages for later sending." + :group 'feedmail) + + +(defcustom feedmail-confirm-outgoing nil + "*If non-nil, give a y-or-n confirmation prompt before sending mail. +This is done after the message is completely prepped, and you'll be +looking at the top of the message in a buffer when you get the prompt. +If set to the symbol 'queued, give the confirmation prompt only while +running the queue (however, the prompt is always suppressed if you are +processing the queue via feedmail-run-the-queue-no-prompts). If set +to the symbol 'immediate, give the confirmation prompt only when +sending immediately. For any other non-nil value, prompt in both +cases. You can give a timeout for the prompt; see variable +feedmail-confirm-outgoing-timeout." + :group 'feedmail-misc + :type 'boolean + ) + + +(defcustom feedmail-confirm-outgoing-timeout nil + "*If non-nil, a timeout in seconds at the send confirmation prompt. +If a positive number, it's a timeout before sending. If a negative +number, it's a timeout before not sending. This will not work if your +version of emacs doesn't include the function y-or-n-p-with-timeout +(e.g., some versions of XEmacs)." + :group 'feedmail-misc + :type '(choice (const nil) integer) +) + + +(defcustom feedmail-nuke-bcc t + "*If non-nil remove BCC: lines from the message headers. +In any case, the BCC: lines do participate in the composed address +list. You may want to leave them in if you're using sendmail +(see feedmail-buffer-eating-function)." + :group 'feedmail-headers + :type 'boolean +) + + +(defcustom feedmail-nuke-resent-bcc t + "*If non-nil remove RESENT-BCC: lines from the message headers. +In any case, the RESENT-BCC: lines do participate in the composed +address list. You may want to leave them in if you're using sendmail +(see feedmail-buffer-eating-function)." + :group 'feedmail-headers + :type 'boolean +) + + +(defcustom feedmail-deduce-bcc-where nil + "*Where should BCC:/RESENT-BCC: addresses appear in the envelope list? +Addresses for the message envelope are deduced by examining +appropriate address headers in the message. Generally, they will show +up in the list of deduced addresses in the order that the headers +happen to appear (duplicate addresses are eliminated in any case). +This variable can be set to the symbol 'first, in which case the +BCC:/RESENT-BCC: addresses will appear at the beginning in the list; +or, it can be set to the symbol 'last, in which case they will appear +at the end of the list. + +Why should you care? Well, maybe you don't, and certainly the same +things could be accomplished by affecting the order of message headers +in the outgoing message. Some people use BCC: as a way of getting +their own \"come back\" copy of each message they send. If BCC: +addresses are not handled first, there can be substantial delays in +seeing the message again. Some configurations of sendmail, for example, +seem to try to deliver to each addressee at least once, immediately +and serially, so slow SMTP conversations can add up to a delay. There +is an option for either 'first or 'last because you might have a +delivery agent that processes the addresses backwards." + :group 'feedmail-headers + :type 'boolean +) + + +(defcustom feedmail-fill-to-cc t + "*If non-nil do smart filling of addressee header lines. +Smart filling means breaking long lines at appropriate points and +making continuation lines. Despite the function name, it includes +TO:, CC:, BCC: (and their RESENT-* forms), as well as FROM: and +REPLY-TO: (though they seldom need it). If nil, the lines are left +as-is. The filling is done after mail address alias expansion." + :group 'feedmail-headers + :type 'boolean +) + + +(defcustom feedmail-fill-to-cc-fill-column default-fill-column + "*Fill column used by feedmail-fill-to-cc." + :group 'feedmail-headers + :type 'integer +) + + +(defcustom feedmail-nuke-bcc-in-fcc nil + "*If non-nil remove [RESENT-]BCC: lines in message copies saved via FCC:. +This is independent of whether the BCC: header lines are actually sent +with the message (see feedmail-nuke-bcc). Though not implied in the name, +the same FCC: treatment applies to both BCC: and RESENT-BCC: lines." + :group 'feedmail-headers + :type 'boolean +) + + +(defcustom feedmail-nuke-body-in-fcc nil + "*If non-nil remove body of message in copies saved via FCC:. +If an positive integer value, leave (up to) that many lines of the +beginning of the body intact. The result is that the FCC: copy will +consist only of the message headers, serving as a sort of an outgoing +message log." + :group 'feedmail-headers + :type '(choice (const nil) (const t) integer) +;; :type 'boolean +) + + +(defcustom feedmail-force-expand-mail-aliases nil + "*If non-nil force the calling of expand-mail-aliases. +Normally, feedmail tries to figure out if you're using mailalias or +mailabbrevs and only calls expand-mail-aliases if it thinks you're +using the mailalias package. This user option can be used to force +the issue since there are configurations which fool the figuring +out." + :group 'feedmail-headers + :type 'boolean +) + + +(defcustom feedmail-nuke-empty-headers t + "*If non-nil, remove header lines which have no contents. +A completely empty SUBJECT: header is always removed, regardless of +the setting of this variable. The only time you would want them left +in would be if you used some headers whose presence indicated +something rather than their contents. This is rare in Internet email +but common in some proprietary systems." + :group 'feedmail-headers + :type 'boolean +) + +;; wjc sez: I think the use of the SENDER: line is pretty pointless, +;; but I left it in to be compatible with sendmail.el and because +;; maybe some distant mail system needs it. Really, though, if you +;; want a sender line in your mail, just put one in there and don't +;; wait for feedmail to do it for you. (Yes, I know all about +;; RFC-822 and RFC-1123, but are you *really* one of those cases +;; they're talking about? I doubt it.) +(defcustom feedmail-sender-line nil + "*If non-nil and the email has no SENDER: header, use this value. +May be nil, in which case nothing in particular is done with respect +to SENDER: lines. By design, will not replace an existing SENDER: +line, but you can achieve that with a fiddle-plex 'replace action. +NB: it makes no sense to use the value t since there is no sensible +default for SENDER:. + +If not nil, it may be a string, a fiddle-plex, or a function which +returns either nil, t, a string, or a fiddle-plex (or, in fact, +another function, but let's not be ridiculous). If a string, it +should be just the contents of the header, not the name of the header +itself nor the trailing newline. If a function, it will be called +with no arguments. For an explanation of fiddle-plexes, see the +documentation for the variable feedmail-fiddle-plex-blurb. In all +cases the name element of the fiddle-plex is ignored and is hardwired +by feedmail to either \"X-Sender\" or \"X-Resent-Sender\". + +You can probably leave this nil, but if you feel like using it, a good +value would be a string of a fully-qualified domain name form of your +address. For example, \"bill@bubblegum.net (WJCarpenter)\". The SENDER: +header is fiddled after the FROM: header is fiddled." + :group 'feedmail-headers + :type '(choice (const nil) string) +) + + +(defcustom feedmail-force-binary-write t + "*If non-nil, force writing file as binary. Applies to queues and FCC:. +On systems where there is a difference between binary and text files, +feedmail will temporarily manipulate the values of buffer-file-type +and/or default-buffer-file-type to make the writing as binary. If +nil, writing will be in text mode. On systems where there is no +distinction or where it is controlled by other variables or other +means, this option has no effect." + :group 'feedmail-misc + :type 'boolean +) + + +(defcustom feedmail-from-line t + "*If non-nil and the email has no FROM: header, use this value. +May be t, in which case a default is computed (and you probably won't +be happy with it). May be nil, in which case nothing in particular is +done with respect to FROM: lines. By design, will not replace an +existing FROM: line, but you can achieve that with a fiddle-plex 'replace +action. + +If neither nil nor t, it may be a string, a fiddle-plex, or a function +which returns either nil, t, a string, or a fiddle-plex (or, in fact, +another function, but let's not be ridiculous). If a string, it +should be just the contents of the header, not the name of the header +itself nor the trailing newline. If a function, it will be called +with no arguments. For an explanation of fiddle-plexes, see the +documentation for the variable feedmail-fiddle-plex-blurb. In all +cases the name element of the fiddle-plex is ignored and is hardwired +by feedmail to either \"X-From\" or \"X-Resent-From\". + +A good value would be a string fully-qualified domain name form of +your address. For example, \"bill@bubblegum.net (WJCarpenter)\". The +default value of this variable uses the standard elisp variable +user-mail-address which should be set on every system but has a decent +chance of being wrong. It also honors mail-from-style. Better to set +this variable explicitly to the string you want or find some other way +to arrange for the message to get a FROM: line." + :group 'feedmail-headers + :type '(choice (const nil) string) +) + + +(defcustom feedmail-deduce-envelope-from t + "*If non-nil, deduce message envelope \"from\" from header FROM: or SENDER:. +In other words, if there is a SENDER: header in the message, temporarily +change the value of user-mail-address to be the same while the message +is being sent. If there is no SENDER: header, use the FROM: header, +if any. Address values are taken from the actual message just before +it is sent, and the process is independent of the values of +feedmail-from-line and/or feedmail-sender-line. + +There are many and good reasons for having the message header +FROM:/SENDER: be different from the message envelope \"from\" +information. However, for most people and for most circumstances, it +is usual for them to be the same (this is probably especially true for +the case where the user doesn't understand the difference between the +two in the first place). + +The idea behind this feature is that you can have everything set up +some normal way for yourself. If for some reason you want to send a +message with another FROM: line, you can just type it at the top of +the message, and feedmail will take care of \"fixing up\" the envelope +\"from\". This only works for mail senders which make use of +user-mail-address as the envelope \"from\" value. For some mail +senders (e.g., feedmail-buffer-to-bin-mail), there is no simple way to +influence what they will use as the envelope." + :group 'feedmail-headers + :type 'boolean +) + + +(defcustom feedmail-x-mailer-line-user-appendage nil + "*See feedmail-x-mailer-line." + :group 'feedmail-headers + :type '(choice (const nil) string) +) + + +(defcustom feedmail-x-mailer-line t + "*Control the form of an X-MAILER: header in an outgoing message. +Moderately useful for debugging, keeping track of your correspondents' +mailer preferences, or just wearing your MUA on your sleeve. You +should probably know that some people are fairly emotional about the +presence of X-MAILER: lines in email. + +If nil, nothing is done about X-MAILER:. + +If t, an X-MAILER: header of a predetermined format is produced, +combining its efforts with any existing X-MAILER: header. If you want +to take the default construct and just add a little blob of your own +at the end, define the variable feedmail-x-mailer-line-user-appendage +as that blob string. A value of t is equivalent to using the function +feedmail-default-x-mailer-generator. + +If neither nil nor t, it may be a string, a fiddle-plex, or a function +which returns either nil, t, a string, or a fiddle-plex (or, in fact, +another function, but let's not be ridiculous). If a string, it +should be just the contents of the header, not the name of the header +itself nor the trailing newline. If a function, it will be called +with no arguments. For an explanation of fiddle-plexes, see the +documentation for the variable feedmail-fiddle-plex-blurb. In all +cases the name element of the fiddle-plex is ignored and is hardwired +by feedmail to either \"X-Mailer\" or \"X-Resent-Mailer\"." + :group 'feedmail-headers + :type '(choice (const t) (const nil) string function) +) + + +(defcustom feedmail-message-id-generator t + "*Specifies the creation of a MESSAGE-ID: header field. + +If nil, nothing is done about MESSAGE-ID:. + +If t, a MESSAGE-ID: header of a predetermined format is produced, but +only if there is not already a MESSAGE-ID: in the message. A value of +t is equivalent to using the function feedmail-default-message-id-generator. + +If neither nil nor t, it may be a string, a fiddle-plex, or a function +which returns either nil, t, a string, or a fiddle-plex (or, in fact, +another function, but let's not be ridiculous). If a string, it +should be just the contents of the header, not the name of the header +itself nor the trailing newline. If a function, it will be called +with one argument: the possibly-nil name of the file associated with +the message buffer. For an explanation of fiddle-plexes, see the +documentation for the variable feedmail-fiddle-plex-blurb. In all +cases the name element of the fiddle-plex is ignored and is hardwired +by feedmail to either \"Message-ID\" or \"Resent-Message-ID\". + +You should let feedmail generate a MESSAGE-ID: for you unless you are sure +that whatever you give your messages to will do it for you (e.g., most +configurations of sendmail). Even if the latter case is true, it +probably won't hurt you to generate your own, and it will then show up +in the saved message if you use FCC:." + :group 'feedmail-headers + :type '(choice (const nil) function) +) + + +(defcustom feedmail-message-id-suffix nil + "*If non-nil, used as a suffix in generated MESSAGE-ID: headers for uniqueness. +The function feedmail-default-message-id-generator creates its work based +on a formatted date-time string, a random number, and a domain-looking suffix. +You can control the suffix used by assigning a string value to this variable. If +you don't supply one, the value of the variable user-mail-address will be used. +If the value of feedmail-message-id-suffix contains an \"@\" character, the string +will be used verbatim, else an \"@\" character will be prepended automatically." + :group 'feedmail-headers + :type 'string +) + +;; this was suggested in various forms by several people; first was +;; Tony DeSimone in Oct 1992; sorry to be so tardy +(defcustom feedmail-date-generator t + "*Specifies the creation of a DATE: header field. + +If nil, nothing is done about DATE:. + +If t, a DATE: header of a predetermined format is produced, but only +if there is not already a DATE: in the message. A value of t is +equivalent to using the function feedmail-default-date-generator. + +If neither nil nor t, it may be a string, a fiddle-plex, or a function +which returns either nil, t, a string, or a fiddle-plex (or, in fact, +another function, but let's not be ridiculous). If a string, it +should be just the contents of the header, not the name of the header +itself nor the trailing newline. If a function, it will be called +with one argument: the possibly-nil name of the file associated with +the message buffer. For an explanation of fiddle-plexes, see the +documentation for the variable feedmail-fiddle-plex-blurb. In all +cases the name element of the fiddle-plex is ignored and is hardwired +by feedmail to either \"Date\" or \"Resent-Date\". + +If you decide to format your own date field, do us all a favor and know +what you're doing. Study the relevant parts of RFC-822 and RFC-1123. +Don't make me come up there! + +You should let feedmail generate a DATE: for you unless you are sure +that whatever you give your messages to will do it for you (e.g., most +configurations of sendmail). Even if the latter case is true, it +probably won't hurt you to generate your own, and it will then show up +in the saved message if you use FCC:." + :group 'feedmail-headers + :type '(choice (const nil) function) +) + + +(defcustom feedmail-fiddle-headers-upwardly t + "*Non-nil means fiddled header fields should be inserted at the top of the header. +Nil means insert them at the bottom. This is mostly a novelty issue since +the standards define the ordering of header fields to be immaterial and it's +fairly likely that some MTA along the way will have its own idea of what the +order should be, regardless of what you specify." + :group 'feedmail-header + :type 'boolean + ) + + +(defcustom feedmail-fiddle-plex-user-list nil + "If non-nil, should be a list of one or more fiddle-plexes. +Each element of the list can also be a function which returns a +fiddle-plex. + +feedmail will use this list of fiddle-plexes to manipulate user-specified +message header fields. It does this after it has completed all normal +message header field manipulation and before calling feedmail-last-chance-hook. + +For an explanation of fiddle-plexes, see the documentation for the +variable feedmail-fiddle-plex-blurb. In contrast to some other fiddle-plex +manipulation functions, in this context, it makes no sense to have an element +which is nil, t, or a simple string." + :group 'feedmail-header + :type 'list + ) + + +(defcustom feedmail-enable-spray nil + "If non-nil, transmit message separately to each addressee. +feedmail normally accumulates a list of addressees and passes the message +along with that list to a buffer-eating function which expects any number +of addressees. If this variable is non-nil, however, feedmail will +repeatedly call the same buffer-eating function. Each time, the list of +addressees will be just one item from the original list. This only affects +the message envelope addresses and doesn't affect what appears in the +message headers except as noted. + +Spray mode is usually pointless, and if you can't think of a good reason for +it, you should avoid it since it is inherently less efficient than normal +multiple delivery. One reason to use it is to overcome mis-featured mail +transports which betray your trust by revealing BCC: addressees in the +headers of a message. Another use is to do a crude form of mailmerge, for +which see feedmail-spray-address-fiddle-plex-list. + +If one of the calls to the buffer-eating function results in an error, +what happens next is carelessly defined, so beware." + :group 'feedmail-spray + :type 'boolean + ) + +(defvar feedmail-spray-this-address nil + "Do not set or change this variable. See feedmail-spray-address-fiddle-plex-list.") + +(defcustom feedmail-spray-address-fiddle-plex-list nil + "User-supplied specification for a crude form of mailmerge capability. +When spraying is enabled, feedmail composes a list of envelope addresses. +In turn, feedmail-spray-this-address is temporarily set to each address +(stripped of any comments and angle brackets) and calls a function which +fiddles message headers according to this variable. For an overview of +fiddle-plex data structures, see the documentation for feedmail-fiddle-plex-blurb. + +May be nil, in which case nothing in particular is done about message +headers for specific addresses. + +May be t, in which case a \"TO:\" header is added to the message with +the stripped address as the header contents. The fiddle-plex operator +is 'supplement. + +May be a string, in which case the string is assumed to be the name of +a message header field with the stripped address serving as the value. +The fiddle-plex operator is 'supplement. + +May be a function, in which case it is called with no arguments and is +expected to return nil, t, a string, another function, or a fiddle-plex. +The result is used recursively. + +May be a list of any combination of the foregoing and fiddle-plexes. (A +value for this variable which consists of a single fiddle-plex must be +nested inside another list to avoid ambiguity.) If a list, each item +is acted on in turn as described above. + +For example, + + (setq feedmail-spray-address-fiddle-plex-list 'my-address-embellisher) + +The idea of the example is that, during spray mode, as each message is +about to be transmitted to an individual address, the function will be +called and will consult feedmail-spray-this-address to find the +stripped envelope email address (no comments or angle brackets). The +function should return an embellished form of the address. + +The recipe for sending form letters is: (1) create a message with all +addressees on BCC: headers; (2) tell feedmail to remove BCC: headers +before sending the message; (3) create a function which will embellish +stripped addresses, if desired; (4) define feedmail-spray-address-fiddle-plex-list +appropriately; (5) send the message with feedmail-enable-spray set +non-nil; (6) stand back and watch co-workers wonder at how efficient +you are at accomplishing inherently inefficient things." + :group 'feedmail-spray + :type 'list + ) + + +(defcustom feedmail-enable-queue nil + "*If non-nil, provide for stashing outgoing messages in a queue. +This is the master on/off switch for feedmail message queuing. +Queuing is quite handy for laptop-based users. It's also handy if you +get a lot of mail and process it more or less sequentially. For +example, you might change your mind about contents of a reply based on +a message you see a bit later. + +There is a separate queue for draft messages, intended to prevent +you from accidentally sending incomplete messages. The queues are +disk-based and intended for later transmission. The messages are +queued in their raw state as they appear in the mail-mode buffer and +can be arbitrarily edited later, before sending, by visiting the +appropriate file in the queue directory (and setting the buffer to +mail-mode or whatever). If you visit a file in the queue directory +and try to queue it again, it will just get saved in its existing file +name. You can move a message from the draft to the main queue or vice +versa by pretending to send it and then selecting whichever queue +directory you want at the prompt. The right thing will happen. + +To transmit all the messages in the queue, invoke the command +feedmail-run-the-queue or feedmail-run-the-queue-no-prompts." + :group 'feedmail-queue + :type 'boolean +) + + +(defcustom feedmail-queue-runner-confirm-global nil + "*If non-nil, give a y-or-n confirmation prompt before running the queue. +Prompt even if the queue is about to be processed as a result of a call to +feedmail-run-the-queue-no-prompts. This gives you a way to bail out +without having to answer no to the individual message prompts." + :group 'feedmail-queue + :type 'boolean) + + +;; I provided a default for VMS because someone asked for it (the +;; normal default doesn't work there), but, puh-lease!, it is a user +;; definable option, so if you don't like the default, change it to +;; whatever you want. I am unable to directly test the VMS goop +;; provided here by levitte@lp.se (Richard Levitte - VMS Whacker). +(defcustom feedmail-queue-directory + (if (memq system-type '(axp-vms vax-vms)) + (expand-file-name (concat (getenv "HOME") "[.MAIL.Q]")) + (concat (getenv "HOME") "/mail/q")) + "*Name of a directory where messages will be queued. +Directory will be created if necessary. Should be a string that +doesn't end with a slash. Default, except on VMS, is \"$HOME/mail/q\"." + :group 'feedmail-queue + :type 'string +) + + +(defcustom feedmail-queue-draft-directory + (if (memq system-type '(axp-vms vax-vms)) + (expand-file-name (concat (getenv "HOME") "[.MAIL.DRAFT]")) + (concat (getenv "HOME") "/mail/draft")) + "*Name of an directory where DRAFT messages will be queued. +Directory will be created if necessary. Should be a string that +doesn't end with a slash. Default, except on VMS, is \"$HOME/mail/draft\"." + :group 'feedmail-queue + :type 'string +) + + +(defcustom feedmail-ask-before-queue t + "*If non-nil, feedmail will ask what you want to do with the message. +Default choices for the message action prompt will include sending it +immediately, putting it in the main queue, putting it in the draft +queue, or returning to the buffer to continue editing. Only matters if +queuing is enabled. If nil, the message is placed in the main queue +without a prompt." + :group 'feedmail-queue + :type 'boolean +) + + +(defcustom feedmail-ask-before-queue-prompt "FQM: Message action (q, i, d, e, ?)? [%s]: " + "*A string which will be used for the message action prompt. +If it contains a \"%s\", that will be replaced with the value of +feedmail-ask-before-queue-default." + :group 'feedmail-queue + :type 'string +) + + +(defcustom feedmail-ask-before-queue-reprompt "FQM: Please type q, i, d, or e; or ? for help [%s]: " + "*A string which will be used for repompting after invalid input. +If it contains a \"%s\", that will be replaced with the value of +feedmail-ask-before-queue-default." + :group 'feedmail-queue + :type 'string +) + + +(defcustom feedmail-ask-before-queue-default "queue" + "*Meaning if user hits return in response to the message action prompt. +Should be a character or a string; if a string, only the first +character is significant. Useful values are those described in +the help for the message action prompt." + :group 'feedmail-queue + :type '(choice string integer) ;use integer to get char +) + + +(defvar feedmail-prompt-before-queue-standard-alist + '((?q . feedmail-message-action-queue) + (?Q . feedmail-message-action-queue-strong) + + (?d . feedmail-message-action-draft) + (?r . feedmail-message-action-draft) + (?D . feedmail-message-action-draft-strong) + (?R . feedmail-message-action-draft-strong) + + (?e . feedmail-message-action-edit) + (?E . feedmail-message-action-edit) + (?\C-g . feedmail-message-action-edit) + (?n . feedmail-message-action-edit) + (?N . feedmail-message-action-edit) + + (?i . feedmail-message-action-send) + (?I . feedmail-message-action-send-strong) + (?s . feedmail-message-action-send) + (?S . feedmail-message-action-send-strong) + + (?* . feedmail-message-action-toggle-spray) + + (?\C-v . feedmail-message-action-help) + (?? . feedmail-message-action-help)) + "An alist of choices for the message action prompt. +All of the values are function names, except help, which is a special +symbol that calls up help for the prompt (the help describes the +actions from the standard alist). To customize your own choices, +define a similar alist called feedmail-prompt-before-queue-user-alist. +The actual alist used for message action will be the standard alist +overlaid with the user-alist. To neutralize an item in the standard +alist without providing a replacement, define an appropriate element +in the user alist with a value of nil." ) + + +(defcustom feedmail-prompt-before-queue-user-alist nil + "See feedmail-prompt-before-queue-standard-alist." + :group 'feedmail-queue + :type 'alist + ) + + +(defcustom feedmail-prompt-before-queue-help-supplement nil + "User-provided supplementary help string for the message action prompt. +When the message action prompt is shown, the user can as for verbose help, +at which point a buffer pops up describing the meaning of possible +responses to the prompt. Through various customizations (see, for +example, feedmail-prompt-before-queue-user-alist), the available responses +and the prompt itself can be changed. If this variable is set to a string +value, that string is written to the help buffer after the standard info. +It may contain embedded line breaks. It will be printed via princ." + :group 'feedmail-queue + :type 'string + ) + + +(defcustom feedmail-queue-reminder-alist + '((after-immediate . feedmail-queue-reminder-brief) + (after-queue . feedmail-queue-reminder-medium) + (after-draft . feedmail-queue-reminder-medium) + (after-run . feedmail-queue-reminder-brief) + (on-demand . feedmail-run-the-queue-global-prompt)) + "See feedmail-queue-reminder." + :group 'feedmail-queue + :type 'alist + ) + + +(defcustom feedmail-queue-chatty t + "*If non-nil, blat a few status messages and such in the mini-buffer. +If nil, just do the work and don't pester people about what's going on. +In some cases, though, specific options inspire mini-buffer prompting. +That's not affected by this variable setting. Also does not control +reporting of error/abnormal conditions." + :group 'feedmail-queue + :type 'boolean +) + + +(defcustom feedmail-queue-chatty-sit-for 2 + "*Duration of pause after most queue-related messages. +After some messages are divulged, it is prudent to pause before +something else obliterates them. This value controls the duration of +the pause." + :group 'feedmail-queue + :type 'integer +) + + +(defcustom feedmail-queue-run-orderer nil + "*If non-nil, name a function which will sort the queued messages. +The function is called during a running of the queue for sending, and +takes one argument, a list of the files in the queue directory. It +may contain the names of non-message files, and it's okay to leave +them in the list when reordering it; they get skipped over later. +When nil, the default action processes the messages in normal sort +order by queued file name, which will typically result in the order +they were placed in the queue." + :group 'feedmail-queue + :type '(choice (const nil) function) +) + + +(defcustom feedmail-queue-use-send-time-for-date nil + "*If non-nil, use send time for the DATE: header value. +This variable is used by the default date generating function, +feedmail-default-date-generator. If nil, the default, the +last-modified timestamp of the queue file is used to create the +message DATE: header; if there is no queue file, the current time is +used." + :group 'feedmail-queue + :type 'boolean +) + + +(defcustom feedmail-queue-use-send-time-for-message-id nil + "*If non-nil, use send time for the MESSAGE-ID: header value. +This variable is used by the default MESSAGE-ID: generating function, +feedmail-default-message-id-generator. If nil, the default, the +last-modified timestamp of the queue file is used to create the +message MESSAGE-ID: header; if there is no queue file, the current time is +used." + :group 'feedmail-queue + :type 'boolean +) + + +(defcustom feedmail-ask-for-queue-slug nil + "*If non-nil, prompt user for part of the queue file name. +The file will automatically get the FQM suffix and an embedded +sequence number for uniqueness, so don't specify that. feedmail will +get rid of all characters other than alphanumeric and hyphen in the +results. If this variable is nil or if you just hit return in +response to the prompt, feedmail queuing will take care of things +properly. At the prompt, completion is available if you want to see +what filenames are already in use, though, as noted, you will not be +typing a complete file name. You probably don't want to be bothered +with this prompting since feedmail, by default, uses queue file names +based on the subjects of the messages." + :group 'feedmail-queue + :type 'boolean +) + + +(defcustom feedmail-queue-slug-maker 'feedmail-queue-subject-slug-maker + "*If non-nil, a function which creates part of the queued file name. +Takes a single argument giving the name of the directory into +which the message will be queued. The returned string should be just +the non-directory filename part, without FQM suffix or uniquifying +sequence numbers. The current buffer holds the raw message. The +default function creates the slug based on the message subject, if +any." + :group 'feedmail-queue + :type '(choice (const nil) function) +) + + +(defcustom feedmail-queue-default-file-slug t + "*Indicates what to use for subject-less messages when forming a file name. +When feedmail queues a message, it creates a unique file name. By default, +the file name is based in part on the subject of the message being queued. +If there is no subject, consult this variable. See documentation for the +function feedmail-queue-subject-slug-maker. + +If t, an innocuous default is used. + +If a string, it is used directly. + +If a function, it is called with no arguments from the buffer containing the raw +text of the message. It must return a string (which may be empty). + +If the symbol 'ask, you will be prompted for a string in the mini-buffer. +Filename completion is available so that you can inspect what's already been +used, but feedmail will do further manipulation on the string you return, so +it's not expected to be a complete filename." + :group 'feedmail-queue + :type 'string +) + + +(defcustom feedmail-queue-fqm-suffix ".fqm" + "*The FQM suffix used to distinguish feedmail queued message files. +You probably want this to be a period followed by some letters and/or +digits. The distinction is to be able to tell them from other random +files that happen to be in the feedmail-queue-directory or +feedmail-queue-draft-directory. By the way, FQM stands for feedmail +queued message." + :group 'feedmail-queue + :type 'string +) + + +(defcustom feedmail-nuke-buffer-after-queue nil + "*If non-nil, silently kill the buffer after a message is queued. +You might like that since a side-effect of queueing the message is +that its buffer name gets changed to the filename. That means that +the buffer won't be reused for the next message you compose. If you +are using VM for creating messages, you probably want to leave this +nil, since VM has its own options for managing the recycling of +message buffers." + :group 'feedmail-queue + :type 'boolean +) + + +(defcustom feedmail-queue-auto-file-nuke nil + "*If non-nil, automatically delete queue files when a message is sent. +Normally, feedmail will notice such files when you send a message in +immediate mode (i.e., not when you're running the queue) and will ask if +you want to delete them. Since the answer is usually yes, setting this +variable to non-nil will tell feedmail to skip the prompt and just delete +the file without bothering you." + :group 'feedmail-queue + :type 'boolean +) + + +;; defvars to make byte-compiler happy(er) +(defvar feedmail-error-buffer nil "not a user option variable") +(defvar feedmail-prepped-text-buffer nil "not a user option variable") +(defvar feedmail-raw-text-buffer nil "not a user option variable") +(defvar feedmail-address-list nil "not a user option variable") + + +(defun feedmail-mail-send-hook-splitter () + "Facilitate dividing mail-send-hook things into queued and immediate cases. +If you have mail-send-hook functions that should only be called for sending/ +queueing messages or only be called for the sending of queued messages, this is +for you. Add this function to mail-send-hook with something like this: + + (add-hook 'mail-send-hook 'feedmail-mail-send-hook-splitter) + +Then add the functions you want called to either feedmail-mail-send-hook-queued +or feedmail-mail-send-hook, as apprpriate. The distinction is that +feedmail-mail-send-hook will be called when you send mail from a composition +buffer (typically by typing C-c C-c), whether the message is sent immediately +or placed in the queue or drafts directory. feedmail-mail-send-hook-queued is +called when messages are being sent from the queue directory, typically via a +call to feedmail-run-the-queue." + (if feedmail-queue-runner-is-active + (run-hooks 'feedmail-mail-send-hook-queued) + (run-hooks 'feedmail-mail-send-hook)) +) + + +(defvar feedmail-mail-send-hook nil + "*See documentation for feedmail-mail-send-hook-splitter.") + + +(defvar feedmail-mail-send-hook-queued nil + "*See documentation for feedmail-mail-send-hook-splitter.") + + +(defun feedmail-confirm-addresses-hook-example () + "An example of a feedmail-last-chance-hook. +It shows the simple addresses and gets a confirmation. Use as: + (setq feedmail-last-chance-hook 'feedmail-confirm-addresses-hook-example)." + (save-window-excursion + (display-buffer (set-buffer (get-buffer-create " F-C-A-H-E"))) + (erase-buffer) + (insert (mapconcat 'identity feedmail-address-list " ")) + (if (not (y-or-n-p "How do you like them apples? ")) + (error "FQM: Sending...gave up in last chance hook") + ))) + + +(defcustom feedmail-last-chance-hook nil + "*User's last opportunity to modify the message on its way out. +It has already had all the header prepping from the standard package. +The next step after running the hook will be to push the buffer into a +subprocess that mails the mail. The hook might be interested in +these: (1) feedmail-prepped-text-buffer contains the header and body +of the message, ready to go; (2) feedmail-address-list contains a list +of simplified recipients of addresses which are to be given to the +subprocess (the hook may change the list); (3) feedmail-error-buffer +is an empty buffer intended to soak up errors for display to the user. +If the hook allows interactive activity, the user should not send more +mail while in the hook since some of the internal buffers will be +reused and things will get confused." + :group 'feedmail-misc + :type 'hook +) + + +(defcustom feedmail-before-fcc-hook nil + "*User's last opportunity to modify the message before FCC action. +It has already had all the header prepping from the standard package. +The next step after running the hook will be to save the message via +FCC: processing. The hook might be interested in these: (1) +feedmail-prepped-text-buffer contains the header and body of the +message, ready to go; (2) feedmail-address-list contains a list of +simplified recipients of addressees to whom the message was sent (3) +feedmail-error-buffer is an empty buffer intended to soak up errors +for display to the user. If the hook allows interactive activity, the +user should not send more mail while in the hook since some of the +internal buffers will be reused and things will get confused." + :group 'feedmail-misc + :type 'hook +) + +(defcustom feedmail-queue-runner-mode-setter + '(lambda (&optional arg) (mail-mode)) + "*A function to set the proper mode of a message file. Called when +the message is read back out of the queue directory with a single +argument, the optional argument used in the call to +feedmail-run-the-queue or feedmail-run-the-queue-no-prompts. + +Most people want mail-mode, so the default value is an anonymous +function which is just a wrapper to ignore the supplied argument when +calling it, but here's your chance to have something different. +Called with funcall, not call-interactively." + :group 'feedmail-queue + :type 'function +) + + +(defcustom feedmail-queue-alternative-mail-header-separator nil + "*Alternative header demarcation for queued messages. +If you sometimes get alternative values for mail-header-separator in +queued messages, set the value of this variable to whatever it is. +For example, rmail-resend uses a mail-header-separator value of empty +string (\"\") when you send/queue a message. + +When trying to send a queued message, if the value of this variable is +non-nil, feedmail will first try to send the message using the value +of mail-header-separator. If it can't find that, it will temporarily +set mail-header-separator to the value of +feedmail-queue-alternative-mail-header-separator and try again." + :group 'feedmail-queue + :type 'string +) + + +(defcustom feedmail-queue-runner-message-sender 'mail-send-and-exit + "*Function to initiate sending a message file. +Called for each message read back out of the queue directory with a +single argument, the optional argument used in the call to +feedmail-run-the-queue or feedmail-run-the-queue-no-prompts. +Interactively, that argument will be the prefix argument. Most people +want mail-send-and-exit (bound to C-c C-c in mail-mode), but here's +your chance to have something different. Called with funcall, not +call-interactively." + :group 'feedmail-queue + :type 'function +) + + +(defcustom feedmail-queue-runner-cleaner-upper + '(lambda (fqm-file &optional arg) + (delete-file fqm-file) + (if (and arg feedmail-queue-chatty) (message "FQM: Nuked %s" fqm-file))) + "*Function that will be called after a message has been sent. It's +not called in the case of errors. This function is called with two +arguments, the name of the message queue file for the message just +sent, and the optional argument used in the call to +feedmail-run-the-queue or feedmail-run-the-queue-no-prompts. +Interactively, that argument will be the prefix argument. In any +case, the affiliated buffer is killed elsewhere, so don't do that +inside this function. Return value is ignored. + +The default action is an anonymous function which gets rid of the file +from the queue directory. With a non-nil second argument, a brief +message is give for each file deleted. You could replace this +function, for example, to archive all of your sent messages someplace +(though there are better ways to get that particular result)." + :group 'feedmail-queue + :type 'function +) + + +(defvar feedmail-queue-runner-is-active nil + "*Non-nil means we're inside the logic of the queue-running loop. +That is, iterating over all messages in the queue to send them. In +that case, the value is the name of the queued message file currently +being processed. This can be used for differentiating customized code +for different scenarios. Users shouldn't set or change this +variable, but may depend on its value as described here.") + + +(defvar feedmail-is-a-resend nil + "*Non-nil means the the message is a RESEND (in the RFC-822 sense). +This affects the composition of certain headers. feedmail sets this +variable as soon as it starts prepping the message text buffer, so any +user-supplied functions can rely on it. Users shouldn't set or change this +variable, but may depend on its value as described here.") + + +(defcustom feedmail-buffer-eating-function 'feedmail-buffer-to-binmail + "*Function used to send the prepped buffer to a subprocess. +The function's three (mandatory) arguments are: (1) the buffer +containing the prepped message; (2) a buffer where errors should be +directed; and (3) a list containing the addresses individually as +strings. Three popular choices for this are +feedmail-buffer-to-binmail, feedmail-buffer-to-smtpmail, and +feedmail-buffer-to-sendmail. If you use the sendmail form, you +probably want to set feedmail-nuke-bcc and/or feedmail-nuke-resent-bcc +to nil. If you use the binmail form, check the value of +feedmail-binmail-template." + :group 'feedmail-misc + :type 'function +) + + +(defcustom feedmail-binmail-template (if mail-interactive "/bin/mail %s" "/bin/rmail %s") + "*Command template for the subprocess which will get rid of the mail. +It can result in any command understandable by /bin/sh. Might not +work at all in non-UNIX environments. The single '%s', if present, +gets replaced by the space-separated, simplified list of addressees. +Used in feedmail-buffer-to-binmail to form the shell command which +will receive the contents of the prepped buffer as stdin. If you'd +like your errors to come back as mail instead of immediately in a +buffer, try /bin/rmail instead of /bin/mail (this can be accomplished +by keeping the default nil setting of mail-interactive). You might +also like to consult local mail experts for any other interesting +command line possibilities." + :group 'feedmail-misc + :type 'string +) + + +;; feedmail-buffer-to-binmail, feedmail-buffer-to-sendmail, and +;; feedmail-buffer-to-smptmail are the only things provided for values +;; for the variable feedmail-buffer-eating-function. It's pretty easy +;; to write your own, though. +(defun feedmail-buffer-to-binmail (prepped errors-to addr-listoid) + "Function which actually calls /bin/mail as a subprocess. +Feeds the buffer to it." + (set-buffer prepped) + (apply + 'call-process-region + (append (list (point-min) (point-max) "/bin/sh" nil errors-to nil "-c" + (format feedmail-binmail-template + (mapconcat 'identity addr-listoid " ")))))) + + +(defun feedmail-buffer-to-sendmail (prepped errors-to addr-listoid) + "Function which actually calls sendmail as a subprocess. +Feeds the buffer to it. Probably has some flaws for RESENT-* and other +complicated cases." + (set-buffer prepped) + (apply 'call-process-region + (append (list (point-min) (point-max) + (if (boundp 'sendmail-program) sendmail-program "/usr/lib/sendmail") + nil errors-to nil "-oi" "-t") + ;; provide envelope "from" to sendmail; results will vary + (list "-f" user-mail-address) + ;; These mean "report errors by mail" and "deliver in background". + (if (null mail-interactive) '("-oem" "-odb"))))) + +;; provided by jam@austin.asc.slb.com (James A. McLaughlin); +;; simplified by WJC after more feedmail development; +;; idea (but not implementation) of copying smtpmail trace buffer to +;; feedmail error buffer from: +;; Mon 14-Oct-1996; Douglas Gray Stephens +;; modified to insert error for displaying +(defun feedmail-buffer-to-smtpmail (prepped errors-to addr-listoid) + "Function which actually calls smtpmail-via-smtp to send buffer as e-mail." + ;; I'm not sure smtpmail.el is careful about the following + ;; return value, but it also uses it internally, so I will fear + ;; no evil. + (require 'smtpmail) + (if (not (smtpmail-via-smtp addr-listoid prepped)) + (progn + (set-buffer errors-to) + (insert "Send via smtpmail failed. Probable SMTP protocol error.\n") + (insert "Look for details below or in the *Messages* buffer.\n\n") + (let ((case-fold-search t) + ;; don't be overconfident about the name of the trace buffer + (tracer (concat "trace.*smtp.*" (regexp-quote smtpmail-smtp-server)))) + (mapcar + '(lambda (buffy) + (if (string-match tracer (buffer-name buffy)) + (progn + (insert "SMTP Trace from " (buffer-name buffy) "\n---------------") + (insert-buffer buffy) + (insert "\n\n")))) + (buffer-list)))))) + + +;; just a place to park a docstring +(defconst feedmail-fiddle-plex-blurb nil + "A fiddle-plex is a concise way of specifying how to fiddle with a header field. +It is a list of up to 4 elements: NAME, VALUE, ACTION, FOLDING. The element +VALUE can also be a list sometimes. + +NAME is the name of the header field to be fiddled with. Although case doesn't +matter in looking for headers, case of NAME is preserved when a header is inserted +via fiddling. It shouldn't include the trailing colon. + +VALUE is either nil, a simple string, a function returning nil or a string, or, +as described below for ACTION 'combine, a list of up to three values. + +ACTION describes the nature of the fiddling to be done. Possibilities +for ACTION (default is 'supplement): + + 'supplement Leave other like fields as-is, insert this one. + + 'replace Delete other like fields, if any, and insert this one. + + 'create Insert this one only if no like field exists. + + 'combine Combine aggregate values of like fields with this one. + In this case, VALUE has a special form. It is a list + of three items: VAL-PRE, VAL-LIKE, and VAL-POST. + VAL-PRE and VAL-POST are strings or nil. VAL-LIKE may + be either a string or a function (it may also be nil, + but there's not much point to that). + + Values of like header fields are aggregated, leading and + trailing whitespace is removed, and embedded + whitespace is left as-is. If there are no like + fields, or the aggregate value is an empty string, + VAL-LIKE is not used. Else, if VAL-LIKE is a function, + it is called with two arguments: NAME and the + aggregate like values. Else, if VAL-LIKE is a string, it is + used as a format string where a single \%s will be + replaced by the aggregate values of like fields. + + VAL-PRE, the results of using VAL-LIKE, and VAL-POST + are concatenated, and the result, if not nil and not + an empty string, is used as the new value for the + field. Although this description sounds a bit + complicated, the idea is to provide a mechanism for + combining the old value with a new value in a flexible + way. For example, if you wanted to add a new value to + an existing header field by adding a semi-colon and + then starting the new value on a continuation line, + you might specify this: + + (nil \"%s;\\n\\t\" \"This is my new value\") + +FOLDING can be nil, in which case VALUE is used as-is. If FOLDING is +non-nil, feedmail \"smart filling\" is done on VALUE just before +insertion. +") + + +(defun feedmail-send-it () + "A function which is a suitable value for send-mail-function. +To use it, you probably want something like this in your .emacs or +similar place: + + (setq send-mail-function 'feedmail-send-it) + (autoload 'feedmail-send-it \"feedmail\")" + + ;; avoid matching trouble over slash vs backslash by getting canonical + (if feedmail-queue-directory + (setq feedmail-queue-directory (expand-file-name feedmail-queue-directory))) + (if feedmail-queue-draft-directory + (setq feedmail-queue-draft-directory (expand-file-name feedmail-queue-draft-directory))) + (if (not feedmail-enable-queue) (feedmail-send-it-immediately) + ;; else, queuing is enabled, should we ask about it or just do it? + (if feedmail-ask-before-queue + (funcall (feedmail-queue-send-edit-prompt)) + (feedmail-dump-message-to-queue feedmail-queue-directory 'after-queue)))) + + +(defun feedmail-message-action-send () + ;; hooks can make this take a while so clear the prompt + (message "FQM: Immediate send...") + (feedmail-send-it-immediately)) + + +;; From a VM mailing list discussion and some suggestions from Samuel Mikes +(defun feedmail-queue-express-to-queue () + "*Send message directly to the queue, with a minimum of fuss and bother." + (interactive) + (let ((feedmail-enable-queue t) + (feedmail-ask-before-queue nil) + (feedmail-queue-reminder-alist nil) + (feedmail-queue-chatty-sit-for 0)) + (feedmail-send-it) + ) +) + + +(defun feedmail-queue-express-to-draft () + "*Send message directly to the draft queue, with a minimum of fuss and bother." + (interactive) + (let ((feedmail-queue-directory feedmail-queue-draft-directory)) + (feedmail-queue-express-to-queue) + ) +) + + +(defun feedmail-message-action-send-strong () + (let ((feedmail-confirm-outgoing nil)) (feedmail-message-action-send))) + + +(defun feedmail-message-action-edit () + (error "FQM: Message not queued; returning to edit")) + + +(defun feedmail-message-action-draft () + (feedmail-dump-message-to-queue feedmail-queue-draft-directory 'after-draft)) + + +(defun feedmail-message-action-draft-strong () + (let ((buffer-file-name nil)) + (feedmail-message-action-draft))) + + +(defun feedmail-message-action-queue () + (feedmail-dump-message-to-queue feedmail-queue-directory 'after-queue)) + + +(defun feedmail-message-action-queue-strong () + (let ((buffer-file-name nil)) + (feedmail-message-action-queue))) + + +(defun feedmail-message-action-toggle-spray () + (let ((feedmail-enable-spray (not feedmail-enable-spray))) + (if feedmail-enable-spray + (message "FQM: For this message, spray toggled ON") + (message "FQM: For this message, spray toggled OFF")) + (sit-for 3) + ;; recursion, but harmless + (feedmail-send-it))) + + +(defun feedmail-message-action-help () + (let ((d-string " ")) + (if (stringp feedmail-ask-before-queue-default) + (setq d-string feedmail-ask-before-queue-default) + (setq d-string (char-to-string feedmail-ask-before-queue-default))) + (feedmail-queue-send-edit-prompt-help d-string) + ;; recursive, but no worries (it goes deeper on user action) + (feedmail-send-it))) + + +;;;###autoload +(defun feedmail-run-the-queue-no-prompts (&optional arg) + "Like feedmail-run-the-queue, but suppress confirmation prompts." + (interactive "p") + (let ((feedmail-confirm-outgoing nil)) (feedmail-run-the-queue arg))) + +;;;###autoload +(defun feedmail-run-the-queue-global-prompt (&optional arg) + "Like feedmail-run-the-queue, but with a global confirmation prompt. +This is generally most useful if run non-interactively, since you can +bail out with an appropriate answer to the global confirmation prompt." + (interactive "p") + (let ((feedmail-queue-runner-confirm-global t)) (feedmail-run-the-queue arg))) + +;;;###autoload +(defun feedmail-run-the-queue (&optional arg) + "Visit each message in the feedmail queue directory and send it out. +Return value is a list of three things: number of messages sent, number of +messages skipped, and number of non-message things in the queue (commonly +backup file names and the like)." + (interactive "p") + ;; avoid matching trouble over slash vs backslash by getting canonical + (if feedmail-queue-directory + (setq feedmail-queue-directory (expand-file-name feedmail-queue-directory))) + (if feedmail-queue-draft-directory + (setq feedmail-queue-draft-directory (expand-file-name feedmail-queue-draft-directory))) + (let* ((maybe-file) + (qlist (feedmail-look-at-queue-directory feedmail-queue-directory)) + (dlist (feedmail-look-at-queue-directory feedmail-queue-draft-directory)) + (q-cnt (nth 0 qlist)) + (q-oth (nth 1 qlist)) + (d-cnt (nth 0 dlist)) + (d-oth (nth 1 dlist)) + (messages-sent 0) + (messages-skipped 0) + (blobby-buffer) + (already-buffer) + (this-mhsep) + (do-the-run t) + (list-of-possible-fqms)) + (if (and (> q-cnt 0) feedmail-queue-runner-confirm-global) + (setq do-the-run + (if (fboundp 'y-or-n-p-with-timeout) + (y-or-n-p-with-timeout (format "FQM: Draft: %dm+%d, Queue: %dm+%d; run the queue? " + d-cnt d-oth q-cnt q-oth) + 5 nil) + (y-or-n-p (format "FQM: Draft: %dm+%d, Queue: %dm+%d; run the queue? " + d-cnt d-oth q-cnt q-oth)) + ))) + (if (not do-the-run) + (setq messages-skipped q-cnt) + (save-window-excursion + (setq list-of-possible-fqms (directory-files feedmail-queue-directory t)) + (if feedmail-queue-run-orderer + (setq list-of-possible-fqms (funcall feedmail-queue-run-orderer list-of-possible-fqms))) + (mapcar + '(lambda (blobby) + (setq maybe-file (expand-file-name blobby feedmail-queue-directory)) + (cond + ((file-directory-p maybe-file) nil) ; don't care about subdirs + ((feedmail-fqm-p blobby) + (setq blobby-buffer (generate-new-buffer (concat "FQM " blobby))) + (setq already-buffer + (if (fboundp 'find-buffer-visiting) ; missing from XEmacs + (find-buffer-visiting maybe-file) + (get-file-buffer maybe-file))) + (if (and already-buffer (buffer-modified-p already-buffer)) + (save-window-excursion + (display-buffer (set-buffer already-buffer)) + (if (fboundp 'y-or-n-p-with-timeout) + ;; make a guess that the user just forgot to save + (if (y-or-n-p-with-timeout (format "FQM: Visiting %s; save before send? " blobby) 10 t) + (save-buffer)) + (if (y-or-n-p (format "FQM: Visiting %s; save before send? " blobby)) + (save-buffer)) + ))) + + (set-buffer blobby-buffer) + (setq buffer-offer-save nil) + (buffer-disable-undo blobby-buffer) + (insert-file-contents-literally maybe-file) + ;; work around text-vs-binary wierdness and also around rmail-resend's creative + ;; manipulation of mail-header-separator + ;; + ;; if we don't find the normal M-H-S, and the alternative is defined but also + ;; not found, try reading the file a different way + ;; + ;; if M-H-S not found and (a-M-H-S is nil or not found) + (if (and (not (feedmail-find-eoh t)) + (or (not feedmail-queue-alternative-mail-header-separator) + (not + (let ((mail-header-separator feedmail-queue-alternative-mail-header-separator)) + (feedmail-find-eoh t))))) + (let ((file-name-buffer-file-type-alist nil) (default-buffer-file-type nil)) + (erase-buffer) (insert-file-contents maybe-file)) + ) + ;; if M-H-S not found and (a-M-H-S is non-nil and is found) + ;; temporarily set M-H-S to the value of a-M-H-S + (if (and (not (feedmail-find-eoh t)) + feedmail-queue-alternative-mail-header-separator + (let ((mail-header-separator feedmail-queue-alternative-mail-header-separator)) + (feedmail-find-eoh t))) + (setq this-mhsep feedmail-queue-alternative-mail-header-separator) + (setq this-mhsep mail-header-separator)) + (funcall feedmail-queue-runner-mode-setter arg) + (condition-case nil ; don't give up the loop if user skips some + (let ((feedmail-enable-queue nil) + (mail-header-separator this-mhsep) + (feedmail-queue-runner-is-active maybe-file)) + (funcall feedmail-queue-runner-message-sender arg) + (set-buffer blobby-buffer) + (if (buffer-modified-p) ; still modified, means wasn't sent + (setq messages-skipped (1+ messages-skipped)) + (setq messages-sent (1+ messages-sent)) + (funcall feedmail-queue-runner-cleaner-upper maybe-file arg) + (if (and already-buffer (not (file-exists-p maybe-file))) + ;; we have gotten rid of the file associated with the + ;; buffer, so update the buffer's notion of that + (save-excursion + (set-buffer already-buffer) + (setq buffer-file-name nil))))) + (error (setq messages-skipped (1+ messages-skipped)))) + (kill-buffer blobby-buffer) + (if feedmail-queue-chatty + (progn + (message "FQM: %d to go, %d sent, %d skipped (%d other files ignored)" + (- q-cnt messages-sent messages-skipped) + messages-sent messages-skipped q-oth) + (sit-for feedmail-queue-chatty-sit-for)))))) + list-of-possible-fqms))) + (if feedmail-queue-chatty + (progn + (message "FQM: %d sent, %d skipped (%d other files ignored)" + messages-sent messages-skipped q-oth) + (sit-for feedmail-queue-chatty-sit-for) + (feedmail-queue-reminder 'after-run) + (sit-for feedmail-queue-chatty-sit-for))) + (list messages-sent messages-skipped q-oth))) + + +;;;###autoload +(defun feedmail-queue-reminder (&optional what-event) + "Perform some kind of reminder activity about queued and draft messages. +Called with an optional symbol argument which says what kind of event +is triggering the reminder activity. The default is 'on-demand, which +is what you typically would use if you were putting this in your emacs start-up +or mail hook code. Other recognized values for WHAT-EVENT (these are passed +internally by feedmail): + + after-immediate (a message has just been sent in immediate mode) + after-queue (a message has just been queued) + after-draft (a message has just been placed in the draft directory) + after-run (the queue has just been run, possibly sending messages) + +WHAT-EVENT is used as a key into the table feedmail-queue-reminder-alist. If +the associated value is a function, it is called without arguments and is expected +to perform the reminder activity. You can supply your own reminder functions +by redefining feedmail-queue-reminder-alist. If you don't want any reminders, +you can set feedmail-queue-reminder-alist to nil." + (interactive "p") + (let ((key (if (and what-event (symbolp what-event)) what-event 'on-demand)) entry reminder) + (setq entry (assoc key feedmail-queue-reminder-alist)) + (setq reminder (cdr entry)) + (if (fboundp reminder) (funcall reminder))) + ) + + +(defun feedmail-queue-reminder-brief () + "Brief display of draft and queued message counts in modeline." + (interactive) + (let (q-cnt d-cnt q-lis d-lis) + (setq q-lis (feedmail-look-at-queue-directory feedmail-queue-directory)) + (setq d-lis (feedmail-look-at-queue-directory feedmail-queue-draft-directory)) + (setq q-cnt (car q-lis)) + (setq d-cnt (car d-lis)) + (if (or (> q-cnt 0) (> d-cnt 0)) + (progn + (message "FQM: [D: %d, Q: %d]" d-cnt q-cnt)))) + ) + + +(defun feedmail-queue-reminder-medium () + "Verbose display of draft and queued message counts in modeline." + (interactive) + (let (q-cnt d-cnt q-oth d-oth q-lis d-lis) + (setq q-lis (feedmail-look-at-queue-directory feedmail-queue-directory)) + (setq d-lis (feedmail-look-at-queue-directory feedmail-queue-draft-directory)) + (setq q-cnt (car q-lis)) + (setq d-cnt (car d-lis)) + (setq q-oth (nth 1 q-lis)) + (setq d-oth (nth 1 d-lis)) + (if (or (> q-cnt 0) (> d-cnt 0)) + (progn + (message "FQM: Draft: %dm+%d in \"%s\", Queue: %dm+%d in \"%s\"" + d-cnt d-oth (file-name-nondirectory feedmail-queue-draft-directory) + q-cnt q-oth (file-name-nondirectory feedmail-queue-directory))))) + ) + + +(defun feedmail-queue-send-edit-prompt () + "Ask whether to queue, send immediately, or return to editing a message." + ;; Some implementation ideas here came from the userlock.el code + (discard-input) + (save-window-excursion + (let ((answer) (d-char) (d-string " ")) + (if (stringp feedmail-ask-before-queue-default) + (progn + (setq d-char (string-to-char feedmail-ask-before-queue-default)) + (setq d-string feedmail-ask-before-queue-default)) + (setq d-string (char-to-string feedmail-ask-before-queue-default)) + (setq d-char feedmail-ask-before-queue-default) + ) + (while (null answer) + (message feedmail-ask-before-queue-prompt d-string) + (let ((user-sez + (let ((inhibit-quit t) (cursor-in-echo-area t) (echo-keystrokes 0)) + (read-char-exclusive)))) + (if (= user-sez help-char) + (setq answer '(^ . feedmail-message-action-help)) + (if (or (eq user-sez ?\C-m) (eq user-sez ?\C-j) (eq user-sez ?y)) + (setq user-sez d-char)) + ;; these char-to-int things because of some incomprensible difference + ;; between the two in byte-compiled stuff between GNUemacs and XEmacs + ;; (well, I'm sure someone could comprehend it, but I say 'uncle') + (setq answer (or (assoc user-sez feedmail-prompt-before-queue-user-alist) + (and (fboundp 'char-to-int) + (assoc (char-to-int user-sez) feedmail-prompt-before-queue-user-alist)) + (assoc user-sez feedmail-prompt-before-queue-standard-alist) + (and (fboundp 'char-to-int) + (assoc (char-to-int user-sez) feedmail-prompt-before-queue-standard-alist)))) + (if (or (null answer) (null (cdr answer))) + (progn + (beep) + (message feedmail-ask-before-queue-reprompt d-string) + (sit-for 3))) + ))) + (cdr answer) + ))) + +(defconst feedmail-p-h-b-n "*FQM Help*") + +(defun feedmail-queue-send-edit-prompt-help (d-string) + (let ((fqm-help (get-buffer feedmail-p-h-b-n))) + (if (and fqm-help (get-buffer-window fqm-help)) + (feedmail-queue-send-edit-prompt-help-later fqm-help d-string) + (feedmail-queue-send-edit-prompt-help-first d-string)))) + +(defun feedmail-queue-send-edit-prompt-help-later (fqm-help d-string) + ;; scrolling fun + (save-selected-window + (let ((signal-error-on-buffer-boundary nil) + (fqm-window (display-buffer fqm-help))) + (select-window fqm-window) + (if (pos-visible-in-window-p (point-max) fqm-window) + (feedmail-queue-send-edit-prompt-help-first d-string) +;; (goto-char (point-min)) + (scroll-up nil) + )))) + +(defun feedmail-queue-send-edit-prompt-help-first (d-string) + (with-output-to-temp-buffer feedmail-p-h-b-n + (princ "You're dispatching a message and feedmail queuing is enabled. +Typing ? or C-v will normally scroll this help buffer. + +Choices: + q QUEUE for later sending (via feedmail-run-the-queue) + Q QUEUE! like \"q\", but always make a new file + i IMMEDIATELY send this (but not the other queued messages) + I IMMEDIATELY! like \"i\", but skip following confirmation prompt + d DRAFT queue in the draft directory + D DRAFT! like \"d\", but always make a new file + e EDIT return to the message edit buffer (don't send or queue) + * SPRAY toggle spray mode (individual message transmissions) + +Synonyms: + s SEND immediately (same as \"i\") + S SEND! immediately (same as \"I\") + r ROUGH draft (same as \"d\") + R ROUGH! draft (same as \"R\") + n NOPE didn't mean it (same as \"e\") + y YUP do the default behavior (same as \"C-m\") + +The user-configurable default is currently \"") + (princ d-string) + (princ "\". For other possibilities, +see the variable feedmail-prompt-before-queue-user-alist. +") + (and (stringp feedmail-prompt-before-queue-help-supplement) + (princ feedmail-prompt-before-queue-help-supplement)) + (save-excursion (set-buffer standard-output) (if (fboundp 'help-mode) (help-mode))))) + +(defun feedmail-look-at-queue-directory (queue-directory) + "Find out some things about a queue directory. +Result is a list containing a count of queued messages in the +directory, a count of other files in the directory, and a high water +mark for prefix sequence numbers. Subdirectories are not included in +the counts." + (let ((q-cnt 0) (q-oth 0) (high-water 0) (blobbet)) + ;; iterate, counting things we find along the way in the directory + (if (file-directory-p queue-directory) + (mapcar + '(lambda (blobby) + (cond + ((file-directory-p blobby) nil) ; don't care about subdirs + ((feedmail-fqm-p blobby) + (setq blobbet (file-name-nondirectory blobby)) + (if (string-match "^[0-9][0-9][0-9]-" blobbet) + (let ((water-mark)) + (setq water-mark (string-to-int (substring blobbet 0 3))) + (if (> water-mark high-water) (setq high-water water-mark)))) + (setq q-cnt (1+ q-cnt))) + (t (setq q-oth (1+ q-oth))) + )) + (directory-files queue-directory t))) + (list q-cnt q-oth high-water))) + +(defun feedmail-tidy-up-slug (slug) + "Utility for mapping out suspect characters in a potential filename" + ;; even programmers deserve a break sometimes, so cover nil for them + (if (null slug) (setq slug "")) + ;; replace all non-alphanumerics with hyphen for safety + (while (string-match "[^a-z0-9-]+" slug) (setq slug (replace-match "-" nil nil slug))) + ;; collapse multiple hyphens to one + (while (string-match "--+" slug) (setq slug (replace-match "-" nil nil slug))) + ;; for tidyness, peel off leading hyphens + (if (string-match "^-*" slug) (setq slug (replace-match "" nil nil slug))) + ;; for tidyness, peel off trailing hyphens + (if (string-match "-*$" slug) (setq slug (replace-match "" nil nil slug))) + slug +) + +(defun feedmail-queue-subject-slug-maker (&optional queue-directory) + "Create a name for storing the message in the queue. +Optional argument QUEUE-DIRECTORY specifies into which directory the +file will be placed. The name is based on the SUBJECT: header (if +there is one). If there is no subject, +feedmail-queue-default-file-slug is consulted Special characters are +mapped to mostly alphanumerics for safety." + (let ((eoh-marker) (case-fold-search t) (subject "") (s-point)) + (setq eoh-marker (feedmail-find-eoh)) + (goto-char (point-min)) + ;; get raw subject value (first line, anyhow) + (if (re-search-forward "^SUBJECT:" eoh-marker t) + (progn (setq s-point (point)) + (end-of-line) + (setq subject (buffer-substring s-point (point))))) + (setq subject (feedmail-tidy-up-slug subject)) + (if (zerop (length subject)) + (setq subject + (cond + ((stringp feedmail-queue-default-file-slug) feedmail-queue-default-file-slug) + ((fboundp feedmail-queue-default-file-slug) + (save-excursion (funcall feedmail-queue-default-file-slug))) + ((eq feedmail-queue-default-file-slug 'ask) + (file-name-nondirectory + (read-file-name "FQM: Message filename slug? " + (file-name-as-directory queue-directory) subject nil subject))) + (t "no subject")) + )) + (feedmail-tidy-up-slug subject) ;; one more time, with feeling + )) + + +(defun feedmail-create-queue-filename (queue-directory) + (let ((slug "wjc")) + (cond + (feedmail-queue-slug-maker + (save-excursion (setq slug (funcall feedmail-queue-slug-maker queue-directory)))) + (feedmail-ask-for-queue-slug + (setq slug (file-name-nondirectory + (read-file-name (concat "FQM: Message filename slug? [" slug "]? ") + (file-name-as-directory queue-directory) slug nil slug)))) + ) + (setq slug (feedmail-tidy-up-slug slug)) + (setq slug (format "%03d-%s" (1+ (nth 2 (feedmail-look-at-queue-directory queue-directory))) slug)) + (concat + (expand-file-name slug queue-directory) + feedmail-queue-fqm-suffix) + )) + + +(defun feedmail-dump-message-to-queue (queue-directory what-event) + (or (file-accessible-directory-p queue-directory) + ;; progn to get nil result no matter what + (progn (make-directory queue-directory t) nil) + (file-accessible-directory-p queue-directory) + (error (concat "FQM: Message not queued; trouble with directory " queue-directory))) + (let ((filename) + (is-fqm) + (is-in-this-dir) + (previous-buffer-file-name buffer-file-name)) + (if buffer-file-name + (progn + (setq is-fqm (feedmail-fqm-p buffer-file-name)) + (setq is-in-this-dir (string-equal + (directory-file-name queue-directory) + (directory-file-name (expand-file-name (file-name-directory buffer-file-name))))))) + ;; if visiting a queued message, just save + (if (and is-fqm is-in-this-dir) + (setq filename buffer-file-name) + (setq filename (feedmail-create-queue-filename queue-directory))) + ;; make binary file on DOS/Win95/WinNT, etc + (let ((buffer-file-type feedmail-force-binary-write)) (write-file filename)) + ;; convenient for moving from draft to q, for example + (if (and previous-buffer-file-name (or (not is-fqm) (not is-in-this-dir)) + (y-or-n-p (format "FQM: Was previously %s; delete that? " previous-buffer-file-name))) + (delete-file previous-buffer-file-name)) + (if feedmail-nuke-buffer-after-queue + (let ((a-s-file-name buffer-auto-save-file-name)) + ;; be aggressive in nuking auto-save files + (and (kill-buffer (current-buffer)) + delete-auto-save-files + (file-exists-p a-s-file-name) + (delete-file a-s-file-name)))) + (if feedmail-queue-chatty + (progn (message (concat "FQM: Queued in " filename)) + (sit-for feedmail-queue-chatty-sit-for))) + (if feedmail-queue-chatty + (progn + (feedmail-queue-reminder what-event) + (sit-for feedmail-queue-chatty-sit-for))))) + + +;; from a similar function in mail-utils.el +(defun feedmail-rfc822-time-zone (time) + (let* ((sec (or (car (current-time-zone time)) 0)) + (absmin (/ (abs sec) 60))) + (format "%c%02d%02d" (if (< sec 0) ?- ?+) (/ absmin 60) (% absmin 60)))) + +(defun feedmail-rfc822-date (arg-time) + (let ((time (if arg-time arg-time (current-time)))) + (concat + (format-time-string "%a, %e %b %Y %T " time) + (feedmail-rfc822-time-zone time) + ))) + + +(defun feedmail-send-it-immediately () + "Handle immediate sending, including during a queue run." + (let* ((feedmail-error-buffer (get-buffer-create " *FQM Outgoing Email Errors*")) + (feedmail-prepped-text-buffer (get-buffer-create " *FQM Outgoing Email Text*")) + (feedmail-raw-text-buffer (current-buffer)) + (feedmail-address-list) + (eoh-marker) + (bcc-holder) + (resent-bcc-holder) + (a-re-rtcb "^RESENT-\\(TO\\|CC\\|BCC\\):") + (a-re-rtc "^RESENT-\\(TO\\|CC\\):") + (a-re-rb "^RESENT-BCC:") + (a-re-dtcb "^\\(TO\\|CC\\|BCC\\):") + (a-re-dtc "^\\(TO\\|CC\\):") + (a-re-db "^BCC:") + (mail-header-separator mail-header-separator) ;; to get a temporary changable copy + ) + (unwind-protect + (save-excursion + (set-buffer feedmail-error-buffer) (erase-buffer) + (set-buffer feedmail-prepped-text-buffer) (erase-buffer) + + ;; jam contents of user-supplied mail buffer into our scratch buffer + (insert-buffer feedmail-raw-text-buffer) + + ;; require one newline at the end. + (goto-char (point-max)) + (or (= (preceding-char) ?\n) (insert ?\n)) + + (let ((case-fold-search nil)) + ;; Change header-delimiter to be what mailers expect (empty line). + (setq eoh-marker (feedmail-find-eoh)) ;; leaves match data in place or signals error + (replace-match "\n") + (setq mail-header-separator "")) + + ;; mail-aliases nil = mail-abbrevs.el + (if (or feedmail-force-expand-mail-aliases + (and (fboundp 'expand-mail-aliases) mail-aliases)) + (expand-mail-aliases (point-min) eoh-marker)) + + ;; make it pretty + (if feedmail-fill-to-cc (feedmail-fill-to-cc-function eoh-marker)) + ;; ignore any blank lines in the header + (goto-char (point-min)) + (while (and (re-search-forward "\n\n\n*" eoh-marker t) (< (point) eoh-marker)) + (replace-match "\n")) + + (let ((case-fold-search t) (addr-regexp)) + (goto-char (point-min)) + ;; there are some RFC-822 combinations/cases missed here, + ;; but probably good enough and what users expect + ;; + ;; use resent-* stuff only if there is at least one non-empty one + (setq feedmail-is-a-resend + (re-search-forward + ;; header name, followed by optional whitespace, followed by + ;; non-whitespace, followed by anything, followed by newline; + ;; the idea is empty RESENT-* headers are ignored + "^\\(RESENT-TO:\\|RESENT-CC:\\|RESENT-BCC:\\)\\s-*\\S-+.*$" + eoh-marker t)) + ;; if we say so, gather the BCC stuff before the main course + (if (eq feedmail-deduce-bcc-where 'first) + (progn (if feedmail-is-a-resend (setq addr-regexp a-re-rb) (setq addr-regexp a-re-db)) + (setq feedmail-address-list (feedmail-deduce-address-list feedmail-prepped-text-buffer (point-min) eoh-marker addr-regexp feedmail-address-list)))) + ;; the main course + (if (or (eq feedmail-deduce-bcc-where 'first) (eq feedmail-deduce-bcc-where 'last)) + ;; handled by first or last cases, so don't get BCC stuff + (progn (if feedmail-is-a-resend (setq addr-regexp a-re-rtc) (setq addr-regexp a-re-dtc)) + (setq feedmail-address-list (feedmail-deduce-address-list feedmail-prepped-text-buffer (point-min) eoh-marker addr-regexp feedmail-address-list))) + ;; not handled by first or last cases, so also get BCC stuff + (progn (if feedmail-is-a-resend (setq addr-regexp a-re-rtcb) (setq addr-regexp a-re-dtcb)) + (setq feedmail-address-list (feedmail-deduce-address-list feedmail-prepped-text-buffer (point-min) eoh-marker addr-regexp feedmail-address-list)))) + ;; if we say so, gather the BCC stuff after the main course + (if (eq feedmail-deduce-bcc-where 'last) + (progn (if feedmail-is-a-resend (setq addr-regexp a-re-rb) (setq addr-regexp a-re-db)) + (setq feedmail-address-list (feedmail-deduce-address-list feedmail-prepped-text-buffer (point-min) eoh-marker addr-regexp feedmail-address-list)))) + (if (not feedmail-address-list) (error "FQM: Sending...abandoned, no addressees")) + ;; not needed, but meets user expectations + (setq feedmail-address-list (nreverse feedmail-address-list)) + ;; Find and handle any BCC fields. + (setq bcc-holder (feedmail-accume-n-nuke-header eoh-marker "^BCC:")) + (setq resent-bcc-holder (feedmail-accume-n-nuke-header eoh-marker "^RESENT-BCC:")) + (if (and bcc-holder (not feedmail-nuke-bcc)) + (progn (goto-char (point-min)) + (insert bcc-holder))) + (if (and resent-bcc-holder (not feedmail-nuke-resent-bcc)) + (progn (goto-char (point-min)) + (insert resent-bcc-holder))) + (goto-char (point-min)) + + ;; fiddle about, fiddle about, fiddle about.... + (feedmail-fiddle-from) + (feedmail-fiddle-sender) + (feedmail-fiddle-x-mailer) + (feedmail-fiddle-message-id + (or feedmail-queue-runner-is-active (buffer-file-name feedmail-raw-text-buffer))) + (feedmail-fiddle-date + (or feedmail-queue-runner-is-active (buffer-file-name feedmail-raw-text-buffer))) + (feedmail-fiddle-list-of-fiddle-plexes feedmail-fiddle-plex-user-list) + + ;; don't send out a blank headers of various sorts + ;; (this loses on continued line with a blank first line) + (goto-char (point-min)) + (and feedmail-nuke-empty-headers ; hey, who's an empty-header? + (while (re-search-forward "^[A-Za-z0-9-]+:[ \t]*\n" eoh-marker t) + (replace-match "")))) + + (run-hooks 'feedmail-last-chance-hook) + + (let ((fcc (feedmail-accume-n-nuke-header eoh-marker "^FCC:")) + (also-file) + (confirm (cond + ((eq feedmail-confirm-outgoing 'immediate) + (not feedmail-queue-runner-is-active)) + ((eq feedmail-confirm-outgoing 'queued) feedmail-queue-runner-is-active) + (t feedmail-confirm-outgoing)))) + (if (or (not confirm) (feedmail-one-last-look feedmail-prepped-text-buffer)) + (let ((user-mail-address (feedmail-envelope-deducer eoh-marker))) + (feedmail-give-it-to-buffer-eater) + (if (and (not feedmail-queue-runner-is-active) (setq also-file (buffer-file-name feedmail-raw-text-buffer))) + (progn ; if a file but not running the queue, offer to delete it + (setq also-file (expand-file-name also-file)) + (if (or feedmail-queue-auto-file-nuke + (y-or-n-p (format "FQM: Delete message file %s? " also-file))) + (save-excursion + ;; if we delete the affiliated file, get rid + ;; of the file name association and make sure we + ;; don't annoy people with a prompt on exit + (delete-file also-file) + (set-buffer feedmail-raw-text-buffer) + (setq buffer-offer-save nil) + (setq buffer-file-name nil) + ) + ))) + (goto-char (point-min)) + ;; re-insert and handle any FCC fields (and, optionally, any BCC). + (if fcc (let ((default-buffer-file-type feedmail-force-binary-write)) + (insert fcc) + (if (not feedmail-nuke-bcc-in-fcc) + (progn (if bcc-holder (insert bcc-holder)) + (if resent-bcc-holder (insert resent-bcc-holder)))) + + (run-hooks 'feedmail-before-fcc-hook) + + (if feedmail-nuke-body-in-fcc + (progn (goto-char eoh-marker) + (if (natnump feedmail-nuke-body-in-fcc) + (forward-line feedmail-nuke-body-in-fcc)) + (delete-region (point) (point-max)) + )) + (mail-do-fcc eoh-marker) + ))) + (error "FQM: Sending...abandoned") ; user bailed out of one-last-look + ))) ; unwind-protect body (save-excursion) + + ;; unwind-protect cleanup forms + (kill-buffer feedmail-prepped-text-buffer) + (set-buffer feedmail-error-buffer) + (if (zerop (buffer-size)) (kill-buffer feedmail-error-buffer) + (progn (display-buffer feedmail-error-buffer) + ;; read fast ... the meter is running + (if (and feedmail-queue-runner-is-active feedmail-queue-chatty) + (progn (message "FQM: Sending...failed") (ding t) (sit-for 3))) + (error "FQM: Sending...failed"))) + (set-buffer feedmail-raw-text-buffer)) + ) ; let + (if (and feedmail-queue-chatty (not feedmail-queue-runner-is-active)) + (progn + (feedmail-queue-reminder 'after-immediate) + (sit-for feedmail-queue-chatty-sit-for))) + ) + + +(defun feedmail-fiddle-header (name value &optional action folding) + "Internal feedmail function for jamming fields into message header. +NAME, VALUE, ACTION, and FOLDING are the four elements of a +fiddle-plex, as described in the documentation for the variable +feedmail-fiddle-plex-blurb." + (let ((case-fold-search t) + (header-colon (concat (regexp-quote name) ":")) + header-regexp eoh-marker has-like ag-like val-like that-point) + (setq header-regexp (concat "^" header-colon)) + (setq eoh-marker (feedmail-find-eoh)) + (goto-char (point-min)) + (setq has-like (re-search-forward header-regexp eoh-marker t)) + + (if (not action) (setq action 'supplement)) + (cond + ((eq action 'supplement) + ;; trim leading/trailing whitespace + (if (string-match "\\`[ \t\n]+" value) + (setq value (substring value (match-end 0)))) + (if (string-match "[ \t\n]+\\'" value) + (setq value (substring value 0 (match-beginning 0)))) + (if (> (length value) 0) + (progn + (if feedmail-fiddle-headers-upwardly + (goto-char (point-min)) + (goto-char eoh-marker)) + (setq that-point (point)) + (insert name ": " value "\n") + (if folding (feedmail-fill-this-one that-point (point)))))) + + ((eq action 'replace) + (if has-like (feedmail-accume-n-nuke-header eoh-marker header-regexp)) + (feedmail-fiddle-header name value 'supplement folding)) + + ((eq action 'create) + (if (not has-like) (feedmail-fiddle-header name value 'supplement folding))) + + ((eq action 'combine) + (setq val-like (nth 1 value)) + (setq ag-like (or (feedmail-accume-n-nuke-header eoh-marker header-regexp) "")) + ;; get rid of initial header name from first instance (front of string) + (if (string-match (concat header-regexp "[ \t\n]+") ag-like) + (setq ag-like (replace-match "" t t ag-like))) + ;; get rid of embedded header names from subsequent instances + (while (string-match (concat "\n" header-colon "[ \t\n]+") ag-like) + (setq ag-like (replace-match "\n\t" t t ag-like))) + ;; trim leading/trailing whitespace + (if (string-match "\\`[ \t\n]+" ag-like) + (setq ag-like (substring ag-like (match-end 0)))) + (if (string-match "[ \t\n]+\\'" ag-like) + (setq ag-like (substring ag-like 0 (match-beginning 0)))) + ;; if ag-like is not nil and not an empty string, transform it via a function + ;; call or format operation + (if (> (length ag-like) 0) + (setq ag-like + (cond + ((and (symbolp val-like) (fboundp val-like)) + (funcall val-like name ag-like)) + ((stringp val-like) + (format val-like ag-like)) + (t nil)))) + (feedmail-fiddle-header name (concat (nth 0 value) ag-like (nth 2 value)) 'supplement folding))) + )) + +(defun feedmail-give-it-to-buffer-eater () + (save-excursion + (if feedmail-enable-spray + (mapcar + '(lambda (feedmail-spray-this-address) + (let ((spray-buffer (get-buffer-create " *FQM Outgoing Email Spray*"))) + (save-excursion + (set-buffer spray-buffer) + (erase-buffer) + ;; not life's most efficient methodology, but spraying isn't + ;; an every-5-minutes event either + (insert-buffer feedmail-prepped-text-buffer) + ;; There's a good case to me made that each separate transmission of + ;; a message in the spray should have a distinct MESSAGE-ID:. There + ;; is also a less compelling argument in the other direction. I think + ;; they technically should have distinct MESSAGE-ID:s, but I doubt that + ;; anyone cares, practically. If someone complains about it, I'll add + ;; it. + (feedmail-fiddle-list-of-spray-fiddle-plexes feedmail-spray-address-fiddle-plex-list) + ;; this (let ) is just in case some buffer eater + ;; is cheating and using the global variable name instead + ;; of its argument to find the buffer + (let ((feedmail-prepped-text-buffer spray-buffer)) + (funcall feedmail-buffer-eating-function + feedmail-prepped-text-buffer + feedmail-error-buffer + (list feedmail-spray-this-address)))) + (kill-buffer spray-buffer) + )) + feedmail-address-list) + (funcall feedmail-buffer-eating-function + feedmail-prepped-text-buffer + feedmail-error-buffer + feedmail-address-list)))) + + +(defun feedmail-envelope-deducer (eoh-marker) + "If feedmail-deduce-envelope-from is false, simply return +user-mail-address. Else, look for SENDER: or FROM: (or RESENT-*) and +return that value." + (if (not feedmail-deduce-envelope-from) + user-mail-address + (let ((from-list)) + (setq from-list + (feedmail-deduce-address-list + (current-buffer) (point-min) eoh-marker (if feedmail-is-a-resend "^RESENT-SENDER:" "^SENDER:") + from-list)) + (if (not from-list) + (setq from-list + (feedmail-deduce-address-list + (current-buffer) (point-min) eoh-marker (if feedmail-is-a-resend "^RESENT-FROM:" "^FROM:") + from-list))) + (if (and from-list (car from-list)) (car from-list) user-mail-address)))) + + +(defun feedmail-fiddle-from () + "Fiddle FROM:." + ;; default is to fall off the end of the list and do nothing + (cond + ;; nil means do nothing + ((eq nil feedmail-from-line) nil) + ;; t is the same a using the default computation, so compute it and recurse + ;; user-full-name suggested by kpc@ptolemy.arc.nasa.gov (=Kimball Collins) + ;; improvement using user-mail-address suggested by + ;; gray@austin.apc.slb.com (Douglas Gray Stephens) + ((eq t feedmail-from-line) + (let ((feedmail-from-line + (let ((at-stuff + (if user-mail-address user-mail-address (concat (user-login-name) "@" (system-name))))) + (cond + ((eq mail-from-style nil) at-stuff) + ((eq mail-from-style 'parens) (concat at-stuff " (" (user-full-name) ")")) + ((eq mail-from-style 'angles) (concat "\"" (user-full-name) "\" <" at-stuff ">")) + )))) + (feedmail-fiddle-from))) + + ;; if it's a string, simply make a fiddle-plex out of it and recurse + ((stringp feedmail-from-line) + (let ((feedmail-from-line (list "ignored" feedmail-from-line 'create))) + (feedmail-fiddle-from))) + + ;; if it's a function, call it and recurse with the resulting value + ((and (symbolp feedmail-from-line) (fboundp feedmail-from-line)) + (let ((feedmail-from-line (funcall feedmail-from-line))) + (feedmail-fiddle-from))) + + ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle + ((listp feedmail-from-line) + (feedmail-fiddle-header + (if feedmail-is-a-resend "Resent-From" "From") + (nth 1 feedmail-from-line) ;; value + (nth 2 feedmail-from-line) ;; action + (nth 3 feedmail-from-line))))) ;; folding + + +(defun feedmail-fiddle-sender () + "Fiddle SENDER:." + ;; default is to fall off the end of the list and do nothing + (cond + ;; nil means do nothing + ((eq nil feedmail-sender-line) nil) + ;; t is not allowed, but handled it just to avoid bugs later + ((eq t feedmail-sender-line) nil) + + ;; if it's a string, simply make a fiddle-plex out of it and recurse + ((stringp feedmail-sender-line) + (let ((feedmail-sender-line (list "ignored" feedmail-sender-line 'create))) + (feedmail-fiddle-sender))) + + ;; if it's a function, call it and recurse with the resulting value + ((and (symbolp feedmail-sender-line) (fboundp feedmail-sender-line)) + (let ((feedmail-sender-line (funcall feedmail-sender-line))) + (feedmail-fiddle-sender))) + + ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle + ((listp feedmail-sender-line) + (feedmail-fiddle-header + (if feedmail-is-a-resend "Resent-Sender" "Sender") + (nth 1 feedmail-sender-line) ;; value + (nth 2 feedmail-sender-line) ;; action + (nth 3 feedmail-sender-line))))) ;; folding + + +(defun feedmail-default-date-generator (maybe-file) + "Default function for generating DATE: header contents." + (let ((date-time)) + (if (and (not feedmail-queue-use-send-time-for-date) maybe-file) + (setq date-time (nth 5 (file-attributes maybe-file)))) + (feedmail-rfc822-date date-time)) + ) + + +(defun feedmail-fiddle-date (maybe-file) + "Fiddle DATE:. See documentation of feedmail-date-generator." + ;; default is to fall off the end of the list and do nothing + (cond + ;; nil means do nothing + ((eq nil feedmail-date-generator) nil) + ;; t is the same a using the function feedmail-default-date-generator, so let it and recurse + ((eq t feedmail-date-generator) + (let ((feedmail-date-generator (feedmail-default-date-generator maybe-file))) + (feedmail-fiddle-date maybe-file))) + + ;; if it's a string, simply make a fiddle-plex out of it and recurse + ((stringp feedmail-date-generator) + (let ((feedmail-date-generator (list "ignored" feedmail-date-generator 'create))) + (feedmail-fiddle-date maybe-file))) + + ;; if it's a function, call it and recurse with the resulting value + ((and (symbolp feedmail-date-generator) (fboundp feedmail-date-generator)) + (let ((feedmail-date-generator (funcall feedmail-date-generator maybe-file))) + (feedmail-fiddle-date maybe-file))) + + ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle + ((listp feedmail-date-generator) + (feedmail-fiddle-header + (if feedmail-is-a-resend "Resent-Date" "Date") + (nth 1 feedmail-date-generator) ;; value + (nth 2 feedmail-date-generator) ;; action + (nth 3 feedmail-date-generator))))) ;; folding + + +(defun feedmail-default-message-id-generator (maybe-file) + "Default function for generating MESSAGE-ID: header contents. +Based on a date and a sort of random number for tie breaking. Unless +feedmail-message-id-suffix is defined, uses user-mail-address, so be +sure it's set." + (let ((date-time) + (end-stuff (if feedmail-message-id-suffix feedmail-message-id-suffix user-mail-address))) + (if (string-match "^\\(.*\\)@" end-stuff) + (setq end-stuff + (concat (if (equal (match-beginning 1) (match-end 1)) "" "-") end-stuff)) + (setq end-stuff (concat "@" end-stuff))) + (if (and (not feedmail-queue-use-send-time-for-message-id) maybe-file) + (setq date-time (nth 5 (file-attributes maybe-file)))) + (format "<%d-%s%s%s>" + (mod (random) 10000) + (format-time-string "%a%d%b%Y%H%M%S" date-time) + (feedmail-rfc822-time-zone date-time) + end-stuff)) + ) + +(defun feedmail-fiddle-message-id (maybe-file) + "Fiddle MESSAGE-ID:. See documentation of feedmail-message-id-generator." + ;; default is to fall off the end of the list and do nothing + (cond + ;; nil means do nothing + ((eq nil feedmail-message-id-generator) nil) + ;; t is the same a using the function feedmail-default-message-id-generator, so let it and recurse + ((eq t feedmail-message-id-generator) + (let ((feedmail-message-id-generator (feedmail-default-message-id-generator maybe-file))) + (feedmail-fiddle-message-id maybe-file))) + + ;; if it's a string, simply make a fiddle-plex out of it and recurse + ((stringp feedmail-message-id-generator) + (let ((feedmail-message-id-generator (list "ignored" feedmail-message-id-generator 'create))) + (feedmail-fiddle-message-id maybe-file))) + + ;; if it's a function, call it and recurse with the resulting value + ((and (symbolp feedmail-message-id-generator) (fboundp feedmail-message-id-generator)) + (let ((feedmail-message-id-generator (funcall feedmail-message-id-generator maybe-file))) + (feedmail-fiddle-message-id maybe-file))) + + ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle + ((listp feedmail-message-id-generator) + (feedmail-fiddle-header + (if feedmail-is-a-resend "Resent-Message-ID" "Message-ID") + (nth 1 feedmail-message-id-generator) ;; value + (nth 2 feedmail-message-id-generator) ;; action + (nth 3 feedmail-message-id-generator))))) ;; folding + + +(defun feedmail-default-x-mailer-generator () + "Default function for generating X-MAILER: header contents." + (concat + (let ((case-fold-search t)) (if (string-match "emacs" emacs-version) "" "emacs ")) + emacs-version " (via feedmail " feedmail-patch-level + (if feedmail-queue-runner-is-active " Q" " I") + (if feedmail-enable-spray "S" "") + (if feedmail-x-mailer-line-user-appendage ") " ")") + feedmail-x-mailer-line-user-appendage)) + + +(defun feedmail-fiddle-x-mailer () + "Fiddle X-MAILER:. See documentation of feedmail-x-mailer-line." + ;; default is to fall off the end of the list and do nothing + (cond + ;; t is the same a using the function feedmail-default-x-mailer-generator, so let it and recurse + ((eq t feedmail-x-mailer-line) + (let ((feedmail-x-mailer-line (feedmail-default-x-mailer-generator))) + (feedmail-fiddle-x-mailer))) + + ;; if it's a string, simply make a fiddle-plex out of it and recurse + ((stringp feedmail-x-mailer-line) + (let ((feedmail-x-mailer-line (list "ignored" (list feedmail-x-mailer-line ";\n\t%s") 'combine))) + (feedmail-fiddle-x-mailer))) + + ;; if it's a function, call it and recurse with the resulting value + ((and (symbolp feedmail-x-mailer-line) (fboundp feedmail-x-mailer-line)) + (let ((feedmail-x-mailer-line (funcall feedmail-x-mailer-line))) + (feedmail-fiddle-x-mailer))) + + ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle + ((listp feedmail-x-mailer-line) + (feedmail-fiddle-header + (if feedmail-is-a-resend "X-Resent-Mailer" "X-Mailer") + (nth 1 feedmail-x-mailer-line) ;; value + (nth 2 feedmail-x-mailer-line) ;; action + (nth 3 feedmail-x-mailer-line))))) ;; folding + + +(defun feedmail-fiddle-spray-address (addy-plex) + "Fiddle header for single spray address. Uses feedmail-spray-this-address." + ;; default is to fall off the end of the list and do nothing + (cond + ;; nil means do nothing + ((eq nil addy-plex) nil) + ;; t means the same as using "TO: and unembellished addy + ((eq t addy-plex) + (let ((addy-plex (list "To" feedmail-spray-this-address))) + (feedmail-fiddle-spray-address addy-plex))) + + ;; if it's a string, simply make a fiddle-plex out of it and recurse, assuming + ;; the string names a header field (e.g., "TO") + ((stringp addy-plex) + (let ((addy-plex (list addy-plex feedmail-spray-this-address))) + (feedmail-fiddle-spray-address addy-plex))) + + ;; if it's a function, call it and recurse with the resulting value + ((and (symbolp addy-plex) (fboundp addy-plex)) + (let ((addy-plex (funcall addy-plex))) + (feedmail-fiddle-spray-address addy-plex))) + + ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle + ((listp addy-plex) + (feedmail-fiddle-header + (nth 0 addy-plex) ;; name + (nth 1 addy-plex) ;; value + (nth 2 addy-plex) ;; action + (nth 3 addy-plex))))) ;; folding + + +(defun feedmail-fiddle-list-of-spray-fiddle-plexes (list-of-fiddle-plexes) + "Fiddling based on a list of fiddle-plexes for spraying." + ;; default is to fall off the end of the list and do nothing + (let ((lofp list-of-fiddle-plexes) fp) + (if (listp lofp) + (while lofp + (setq fp (car lofp)) + (setq lofp (cdr lofp)) + (feedmail-fiddle-spray-address fp)) + (feedmail-fiddle-spray-address lofp)))) + + +(defun feedmail-fiddle-list-of-fiddle-plexes (list-of-fiddle-plexes) + "Fiddling based on a list of fiddle-plexes. Values t, nil, and string are pointless." + ;; default is to fall off the end of the list and do nothing + (let ((lofp list-of-fiddle-plexes) fp) + (while lofp + (setq fp (car lofp)) + (setq lofp (cdr lofp)) + (cond + + ;; if it's a function, call it and recurse with the resulting value + ((and (symbolp fp) (fboundp fp)) + (let ((lofp (list (funcall fp)))) (feedmail-fiddle-list-of-fiddle-plexes lofp))) + + ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle + ((listp fp) + (feedmail-fiddle-header + (nth 0 fp) + (nth 1 fp) ;; value + (nth 2 fp) ;; action + (nth 3 fp))))))) ;; folding + + +(defun feedmail-accume-n-nuke-header (header-end header-regexp) + "Delete headers matching a regexp and their continuation lines. +There may be multiple such lines, and each may have arbitrarily +many continuation lines. Return an accumulation of the deleted +headers, including the intervening newlines." + (let ((case-fold-search t) (dropout)) + (save-excursion + (goto-char (point-min)) + ;; iterate over all matching lines + (while (re-search-forward header-regexp header-end t) + (forward-line 1) + (setq dropout (concat dropout (buffer-substring (match-beginning 0) (point)))) + (delete-region (match-beginning 0) (point)) + ;; get rid of any continuation lines + (while (and (looking-at "^[ \t].*\n") (< (point) header-end)) + (forward-line 1) + (setq dropout (concat dropout (buffer-substring (match-beginning 0) (point)))) + (replace-match "")))) + (identity dropout))) + +(defun feedmail-fill-to-cc-function (header-end) + "Smart filling of address headers (don't be fooled by the name). +The filling tries to avoid splitting lines except at commas. This +avoids, in particular, splitting within parenthesized comments in +addresses. Headers filled include FROM:, REPLY-TO:, TO:, CC:, BCC:, +RESENT-TO:, RESENT-CC:, and RESENT-BCC:." + (let ((case-fold-search t) + this-line + this-line-end) + (save-excursion + (goto-char (point-min)) + ;; iterate over all TO:/CC:, etc, lines + (while + (re-search-forward + "^\\(FROM:\\|REPLY-TO:\\|TO:\\|CC:\\|BCC:\\|RESENT-TO:\\|RESENT-CC:\\|RESENT-BCC:\\)" + header-end t) + (setq this-line (match-beginning 0)) + ;; replace 0 or more leading spaces with a single space + (and (looking-at "[ \t]*") (replace-match " ")) + (forward-line 1) + ;; get any continuation lines + (while (and (looking-at "[ \t]+") (< (point) header-end)) + (forward-line 1)) + (setq this-line-end (point-marker)) + (save-excursion (feedmail-fill-this-one this-line this-line-end)) + )))) + + +(defun feedmail-fill-this-one (this-line this-line-end) + "In-place smart filling of the region bounded by the two arguments." + (let ((fill-prefix "\t") + (fill-column feedmail-fill-to-cc-fill-column)) + ;; The general idea is to break only on commas. Collapse + ;; multiple whitespace to a single blank; change + ;; all the blanks to something unprintable; change the + ;; commas to blanks; fill the region; change it back. + (goto-char this-line) + (while (re-search-forward "\\s-+" (1- this-line-end) t) + (replace-match " ")) + + (subst-char-in-region this-line this-line-end ? 2 t) ; blank->C-b + (subst-char-in-region this-line this-line-end ?, ? t) ; comma->blank + + (fill-region-as-paragraph this-line this-line-end) + + (subst-char-in-region this-line this-line-end ? ?, t) ; comma<-blank + (subst-char-in-region this-line this-line-end 2 ? t) ; blank<-C-b + + ;; look out for missing commas before continuation lines + (goto-char this-line) + (while (re-search-forward "\\([^,]\\)\n\t[ ]*" this-line-end t) + (replace-match "\\1,\n\t")) + )) + + +(require 'mail-utils) ; pick up mail-strip-quoted-names +(defun feedmail-deduce-address-list (message-buffer header-start header-end addr-regexp address-list) + "Get address list with all comments and other excitement trimmed. +Addresses are collected only from headers whose names match the fourth +argument Returns a list of strings. Duplicate addresses will have +been weeded out." + (let ((simple-address) + (address-blob) + (this-line) + (this-line-end)) + (unwind-protect + (save-excursion + (set-buffer (get-buffer-create " *FQM scratch*")) (erase-buffer) + (insert-buffer-substring message-buffer header-start header-end) + (goto-char (point-min)) + (let ((case-fold-search t)) + (while (re-search-forward addr-regexp (point-max) t) + (replace-match "") + (setq this-line (match-beginning 0)) + (forward-line 1) + ;; get any continuation lines + (while (and (looking-at "^[ \t]+") (< (point) (point-max))) + (forward-line 1)) + (setq this-line-end (point-marker)) + ;; only keep if we don't have it already + (setq address-blob + (mail-strip-quoted-names (buffer-substring this-line this-line-end))) + (while (string-match "\\([, \t\n\r]*\\)\\([^, \t\n\r]+\\)" address-blob) + (setq simple-address (substring address-blob (match-beginning 2) (match-end 2))) + (setq address-blob (replace-match "" t t address-blob)) + (if (not (member simple-address address-list)) + (add-to-list 'address-list simple-address))) + )) + (kill-buffer nil))) + (identity address-list))) + + +(defun feedmail-one-last-look (feedmail-prepped-text-buffer) + "Offer the user one last chance to give it up." + (save-excursion + (save-window-excursion + (switch-to-buffer feedmail-prepped-text-buffer) + (if (and (fboundp 'y-or-n-p-with-timeout) (numberp feedmail-confirm-outgoing-timeout)) + (y-or-n-p-with-timeout + "FQM: Send this email? " + (abs feedmail-confirm-outgoing-timeout) + (> feedmail-confirm-outgoing-timeout 0)) + (y-or-n-p "FQM: Send this email? ")) + ))) + +(defun feedmail-fqm-p (might-be) + "Internal; does filename end with FQM suffix?" + (string-match (concat (regexp-quote feedmail-queue-fqm-suffix) "$") might-be)) + + +(defun feedmail-find-eoh (&optional noerror) + "Internal; finds the end of message header fields, returns mark just before it" + (save-excursion + (goto-char (point-min)) + (if (re-search-forward (concat "^" (regexp-quote mail-header-separator) "\n") nil noerror) + (progn + (forward-line -1) + (point-marker))))) + +(provide 'feedmail) +;;; feedmail.el ends here