# HG changeset patch # User Chong Yidong # Date 1260763903 0 # Node ID c59fc4a754cc36a0a67ed050dddb0abf70150081 # Parent 18ebc6fe2cc983866e6d5758f8a4490972a2f545 * sem-user.texi (Semantic mode, Idle Scheduler, Smart Completion) (Smart Jump, Analyzer Debug): Copyedits. (Semantic mode user commands): Link to new nodes. (Speedbar, SymRef, MRU Bookmarks, Sticky Func Mode) (Highlight Func Mode, Tag Decoration Mode): New nodes, from the upstream Semantic manual. * semantic.texi (Introduction): Minor fix to diagram. diff -r 18ebc6fe2cc9 -r c59fc4a754cc doc/misc/ChangeLog --- a/doc/misc/ChangeLog Mon Dec 14 03:28:34 2009 +0000 +++ b/doc/misc/ChangeLog Mon Dec 14 04:11:43 2009 +0000 @@ -1,3 +1,14 @@ +2009-12-14 Chong Yidong + + * sem-user.texi (Semantic mode, Idle Scheduler, Smart Completion) + (Smart Jump, Analyzer Debug): Copyedits. + (Semantic mode user commands): Link to new nodes. + (Speedbar, SymRef, MRU Bookmarks, Sticky Func Mode) + (Highlight Func Mode, Tag Decoration Mode): New nodes, from the + upstream Semantic manual. + + * semantic.texi (Introduction): Minor fix to diagram. + 2009-12-09 Michael Albinus * eshell.texi (History): Add the other built-in variables. diff -r 18ebc6fe2cc9 -r c59fc4a754cc doc/misc/sem-user.texi --- a/doc/misc/sem-user.texi Mon Dec 14 03:28:34 2009 +0000 +++ b/doc/misc/sem-user.texi Mon Dec 14 04:11:43 2009 +0000 @@ -11,24 +11,31 @@ @c section entitled ``GNU Free Documentation License''. You can begin using @semantic{} by enabling Semantic mode, a global -minor mode: type @kbd{M-x semantic-mode}, or click on the @samp{Source -Code Parsers (Semantic)} menu item in the @samp{Tools} menu. +minor mode: type @kbd{M-x semantic-mode}, or open the @samp{Tools} +menu and click on the menu item named @samp{Source Code Parsers +(Semantic)}. @xref{Semantic mode}. When Semantic mode is turned on, Emacs automatically parses each file -you visit. This allows you to use @semantic{} user commands in those -buffers. It also enables a number of ``helper'' minor modes for -saving tags, displaying tag information, and so forth. @xref{Semantic -mode}. +you visit. You can then use @semantic{} user commands in those +buffers (@pxref{Semantic mode user commands}). You can also choose to +enable a number of ``helper'' minor modes for saving tags, displaying +tag information, and so forth. To enable Semantic mode each time you start Emacs, add the line @code{(semantic-mode 1)} to your initialization file. @xref{Init File,,,emacs,Emacs manual}. @menu -* Semantic mode:: Global minor mode for @semantic{}. -* SemanticDB:: Caching parsed buffers between sessions. -* Idle Scheduler:: Performing @semantic{} operations when idle. -* Analyzer:: Semantic tools for analyzing code. +* Semantic mode:: Global minor mode for @semantic{}. +* SemanticDB:: Caching parsed buffers between sessions. +* Idle Scheduler:: @semantic{} actions that occur when idle. +* Analyzer:: Semantic tools for analyzing code. +* Speedbar:: Using @semantic{} with the Speedbar. +* SymRef:: Interface to symbol reference tools. +* MRU Bookmarks:: Managing tag ``bookmarks''. +* Sticky Func Mode:: Showing declarations in the header line. +* Highlight Func Mode:: Highlight the current function declaration. +* Tag Decoration Mode:: Minor mode to decorate tags. @end menu @node Semantic mode @@ -38,8 +45,9 @@ Semantic mode is a global minor mode for @semantic{} as a whole. When enabled, each file you visit is automatically parsed, provided its major mode is specified in the variable -@code{semantic-new-buffer-setup-functions} (the default is to parse -every buffer @semantic{} knows how to parse). +@code{semantic-new-buffer-setup-functions} (the default value of this +variable sets up parsing for all the parsers included with Emacs, but +you may add to it if you install additional parsers). In each parser-enabled buffer, a number of @semantic{} commands are available for navigating, querying, and editing source code. @@ -48,14 +56,13 @@ commands. In addition, enabling Semantic mode turns on certain auxiliary global -minor modes, as specified by the variable -@code{semantic-default-submodes}. The default auxiliary modes are -SemanticDB mode (@pxref{SemanticDB}) and Global Semantic Idle -Scheduler mode (@pxref{Idle Scheduler}). You can also toggle the -auxiliary minor modes separately, using their mode functions -(e.g. @kbd{M-x semanticdb-minor-mode}), or via the @samp{Development} -menu. These auxiliary minor modes are described in the following -sections. +minor modes. The variable @code{semantic-default-submodes} determines +which auxiliary modes are enabled; the defaults are SemanticDB mode +(@pxref{SemanticDB}) and Global Semantic Idle Scheduler mode +(@pxref{Idle Scheduler}). You can also toggle the auxiliary minor +modes separately, using their mode functions (e.g. @kbd{M-x +semanticdb-minor-mode}), or via the @samp{Development} menu. The +various auxiliary minor modes are described in the following sections. @defvar semantic-new-buffer-setup-functions The value of this variable is an alist of functions to call for @@ -78,14 +85,14 @@ valid mode symbols are: @itemize -@item @code{semantic-idle-scheduler-mode} (@pxref{Idle Scheduler}). -@item @code{semanticdb-minor-mode} (@pxref{SemanticDB}). -@item @code{semantic-idle-summary-mode} (@pxref{Idle Summary Mode}). -@item @code{semantic-idle-completions-mode} (@pxref{Idle Completions Mode}). -@item @code{semantic-highlight-func-mode} -@item @code{semantic-decoration-mode} -@item @code{semantic-stickyfunc-mode} -@item @code{semantic-mru-bookmark-mode} +@item @code{global-semantic-idle-scheduler-mode} (@pxref{Idle Scheduler}). +@item @code{global-semanticdb-minor-mode} (@pxref{SemanticDB}). +@item @code{global-semantic-idle-summary-mode} (@pxref{Idle Summary Mode}). +@item @code{global-semantic-idle-completions-mode} (@pxref{Idle Completions Mode}). +@item @code{global-semantic-highlight-func-mode} (@pxref{Highlight Func Mode}). +@item @code{global-semantic-decoration-mode} (@pxref{Tag Decoration Mode}). +@item @code{global-semantic-stickyfunc-mode} (@pxref{Sticky Func Mode}). +@item @code{global-semantic-mru-bookmark-mode} (@pxref{MRU Bookmarks}). @end itemize @end defvar @@ -123,11 +130,13 @@ @item C-c , g Prompt for a tag, and display a list of tags that call it -(@code{semantic-symref-symbol}). +(@code{semantic-symref-symbol}). This relies on the presence of an +external symbol reference tool. @xref{SymRef}. @item C-c , G Display a list of tags that call the current tag -(@code{semantic-symref}). +(@code{semantic-symref}). This relies on the presence of an external +symbol reference tool. @xref{SymRef}. @item C-c , p Move point to the previous tag (@code{senator-previous-tag}). @@ -226,7 +235,6 @@ You can change the name of the SemanticDB directory by customizing the variable @code{semanticdb-default-save-directory}. -@anchor{semanticdb-default-save-directory} @deffn Option semanticdb-default-save-directory The name of the directory where SemanticDB cache files are saved. If the value is @code{nil}, SemanticDB saves its data into a single file, @@ -234,7 +242,6 @@ @code{semanticdb-default-file-name}. @end deffn -@anchor{semanticdb-default-file-name} @deffn Option semanticdb-default-file-name The name of a cache file in which to save SemanticDB, when @code{semanticdb-default-save-directory} is @code{nil}. @@ -244,7 +251,6 @@ suppress saving altogether, by customizing @code{semanticdb-persistent-path}: -@anchor{semanticdb-persistent-path} @deffn Option semanticdb-persistent-path List of valid paths for SemanticDB to cache. Each element should be a directory name (a string); then the parse data from any file in that @@ -260,7 +266,6 @@ The default value is @code{(always)}. @end deffn -@anchor{semanticdb-project-predicate-functions} @defvar semanticdb-project-predicate-functions The value of this variable is a list of predicates for indicating that a directory belongs to a project. This list is used when the value of @@ -273,7 +278,6 @@ controlled by them. @end defvar -@anchor{semanticdb-save-database-hooks} @deffn Option semanticdb-save-database-hooks Abnormal hook run after a database is saved. Each function is called with one argument, the object representing the database recently @@ -303,9 +307,9 @@ the @dfn{system include path} (@pxref{Include paths}). @menu -* Search Throttle:: Controlling how semanticdb searches occur -* Semanticdb Roots:: Specifying the root of different projects -* Include paths:: Add/Remove directories to include search paths +* Search Throttle:: Controlling how semanticdb searches occur. +* Semanticdb Roots:: Specifying the root of different projects. +* Include paths:: Specifying the directories to search. * Semanticdb search debugging commands:: @end menu @@ -328,7 +332,6 @@ '(project unloaded system recursive)) @end example -@anchor{semanticdb-find-default-throttle} @defvar semanticdb-find-default-throttle The default throttle for @code{semanticdb-find} routines. The throttle controls how detailed the list of database @@ -377,7 +380,6 @@ automatically. @xref{Top,,,ede,EDE manual}. You can also specify them yourself. -@anchor{semanticdb-project-roots} @deffn Option semanticdb-project-roots The value of this variable is a list of directories (strings) that are project roots. All subdirectories of a project root are considered @@ -385,7 +387,6 @@ @code{semanticdb-project-root-functions}. @end deffn -@anchor{semanticdb-project-root-functions} @defvar semanticdb-project-root-functions The value of this variable is a list of functions to determine a given directory's project root. These functions are called, one at a time, @@ -406,26 +407,22 @@ You can add and remove system include paths using the following commands: -@anchor{semantic-add-system-include} @deffn Command semantic-add-system-include dir &optional mode Prompts for a directory, @var{dir}, and add it as a system include path for the current major mode. When called non-interactively, the major mode can be specified with the @var{mode} argument. @end deffn -@anchor{semantic-remove-system-include} @deffn Command semantic-remove-system-include dir &optional mode Prompt for a directory, @var{dir}, and remove it from the system include path for the current major mode (or @var{mode}). @end deffn -@anchor{semantic-customize-system-include-path} @deffn Command semantic-customize-system-include-path &optional mode Customize the system include path for the current major mode (or @var{mode}). @end deffn -@anchor{semanticdb-implied-include-tags} @defun semanticdb-implied-include-tags Include tags implied for all files of a given mode. You can set this variable with @code{defvar-mode-local} for a particular mode so that @@ -446,11 +443,9 @@ semanticdb-find-adebug-lost-includes}. @deffn Command semanticdb-dump-all-table-summary -@anchor{semanticdb-dump-all-table-summary} Dump a list of all databases in Emacs memory. @end deffn -@anchor{semanticdb-find-test-translate-path} @deffn Command semanticdb-find-test-translate-path &optional arg Call and output results of @dfn{semanticdb-find-translate-path}. In the displayed buffer, you can type @key{SPC} to expand items. With @@ -458,7 +453,6 @@ @end deffn @deffn Command semanticdb-find-adebug-lost-includes -@anchor{semanticdb-find-adebug-lost-includes} Translate the current path, then display the lost includes. Examines the variable @code{semanticdb-find-lost-includes}. @end deffn @@ -466,7 +460,6 @@ Lastly, you can test an explicit search term using this command: @deffn Command semantic-adebug-searchdb regex -@anchor{semantic-adebug-searchdb} Search the semanticdb for @var{regex} for the current buffer. Display the results as a debug list. @end deffn @@ -482,7 +475,6 @@ could write a new database backend that stores tags into a database, or other storage system. -@anchor{semanticdb-new-database-class} @defvar semanticdb-new-database-class The default type of database created for new files. This can be changed on a per file basis, so that some directories are saved using @@ -498,7 +490,6 @@ summary-mode, or the analyzer. @deffn Command semanticdb-create-ebrowse-database dir -@anchor{semanticdb-create-ebrowse-database} Create an @var{ebrowse} database for directory @var{dir}. The database file is stored in ~/.semanticdb, or whichever directory is specified by @code{semanticdb-default-system-save-directory}. @@ -508,13 +499,13 @@ @section Idle Scheduler @cindex Idle Scheduler -The @dfn{Semantic idle scheduler} is a part of @semantic{} that +The @dfn{Semantic Idle Scheduler} is a part of @semantic{} that performs various operations while Emacs is waiting for user input -(idle time). Its primary job is to perform buffer parsing, but it is -also used for other purposes, such as displaying information about -tags. +(idle time). Its primary job is to perform buffer parsing during idle +time. You can also use the Idle Scheduler to display function +prototypes (@pxref{Idle Summary Mode}) or symbol completions +(@pxref{Idle Completions Mode}). -@anchor{global-semantic-idle-scheduler-mode} @deffn Command global-semantic-idle-scheduler-mode &optional arg This command toggles Semantic Idle Scheduler mode in every @semantic{}-enabled buffer. This minor mode ensures that the buffer @@ -525,24 +516,22 @@ Mode}). @end deffn -@anchor{semantic-idle-scheduler-idle-time} @deffn Option semantic-idle-scheduler-idle-time The value of this variable is the amount of idle time, in seconds, before the Semantic idle scheduler activates. The default is 1. @end deffn -@anchor{semantic-idle-scheduler-verbose-flag} @deffn Option semantic-idle-scheduler-verbose-flag If this variable is non-@code{nil}, the idle scheduler prints verbose messages while running, which are useful for debugging. @end deffn @menu -* Reparsing Options:: Reparsing the current buffer in idle time -* Idle Working Options:: Options for extra work done at idle time -* Debugging Idle Time Issues:: How to produce good bug reports -* Idle Summary Mode:: Display prototype of symbol under cursor -* Idle Completions Mode:: Smart completion pop-up help +* Reparsing Options:: Reparsing the current buffer in idle time. +* Idle Working Options:: Options for extra work done at idle time. +* Debugging Idle Time Issues:: How to produce good bug reports. +* Idle Summary Mode:: Display prototype of symbol under cursor. +* Idle Completions Mode:: Smart completion pop-up help. @end menu @node Reparsing Options @@ -552,26 +541,22 @@ automatically reparses all buffers that need it. Any arriving user input cancels this, returning Emacs to its normal editing behavior. -@anchor{semantic-idle-scheduler-max-buffer-size} @deffn Option semantic-idle-scheduler-max-buffer-size Maximum size in bytes of buffers automatically reparsed. If this value is less than or equal to @var{0}, buffers are automatically reparsed regardless of their size. @end deffn -@anchor{semantic-idle-scheduler-no-working-message} @deffn Option semantic-idle-scheduler-no-working-message If non-@code{nil}, disable display of working messages whie reparsing. @end deffn -@anchor{semantic-idle-scheduler-working-in-modeline-flag} @deffn Option semantic-idle-scheduler-working-in-modeline-flag If non-@code{nil}, show working messages in the mode line. Normally, re-parsing shows messages in the minibuffer; this moves the parse message to the modeline instead. @end deffn -@anchor{semantic-before-idle-scheduler-reparse-hook} @defvar semantic-before-idle-scheduler-reparse-hook This normal hook is run just before the idle scheduler begins reparsing. If any hook function throws an error, the value of this @@ -579,7 +564,6 @@ lexical errors. @end defvar -@anchor{semantic-after-idle-scheduler-reparse-hook} @defvar semantic-after-idle-scheduler-reparse-hook This normal hook is run after the idle scheduler finishes reparsing. @@ -609,13 +593,11 @@ out after a longer idle delay. The following features control how the idle work is performed. -@anchor{semantic-idle-scheduler-work-idle-time} @deffn Option semantic-idle-scheduler-work-idle-time The value of this variable is the amount of idle time, in seconds, before commencing idle work. The default is 60. @end deffn -@anchor{semantic-idle-work-parse-neighboring-files-flag} @deffn Option semantic-idle-work-parse-neighboring-files-flag If the value of this variable is non-@code{nil}, the Semantic idle scheduler uses idle work time to parse files in the same directory as @@ -633,12 +615,10 @@ debugger. Instead, use the following commands to debug the error: @deffn Command semantic-debug-idle-function -@anchor{semantic-debug-idle-function} Run the Semantic idle function with debugging turned on. @end deffn @deffn Command semantic-debug-idle-work-function -@anchor{semantic-debug-idle-work-function} Run the Semantic idle work function with debugging turned on. @end deffn @@ -650,8 +630,6 @@ echo area. Its functionality is similar to what ElDoc mode provides for Emacs Lisp (@pxref{Lisp Doc,,,emacs,Emacs manual}). -@anchor{global-semantic-idle-summary-mode} -@anchor{semantic-idle-summary-mode} @deffn global-semantic-idle-summary-mode &optional arg This command toggles Semantic Idle Summary mode in all @semantic{}-enabled buffers. You can also toggle it via the @@ -666,14 +644,12 @@ You can override the method for getting the current tag to display by setting @code{idle-summary-current-symbol-info}. -@anchor{semantic-idle-summary-function} @deffn Option semantic-idle-summary-function The value of this variable should be a function to call to display tag information during idle time. See the variable @code{semantic-format-tag-functions} for a list of useful functions. @end deffn -@anchor{semantic-idle-summary-out-of-context-faces} @defvar semantic-idle-summary-out-of-context-faces The value of this variable is a list of font-lock faces indicating useless summary contexts. These are generally faces used to highlight @@ -692,8 +668,6 @@ Semantic Idle Completions mode performs completion based on the Semantic Analyzer (@pxref{Analyzer}). -@anchor{global-semantic-idle-completions-mode} -@anchor{semantic-idle-completions-mode} @deffn global-semantic-idle-completions-mode &optional arg This command toggles Semantic Idle Completions mode in every @semantic{}-enabled buffer. You can also toggle it via the @samp{Show @@ -743,7 +717,6 @@ You can also exit inline completion by issuing any other Emacs command. The completion text then disappears from the buffer. -@anchor{semantic-complete-analyze-inline-idle} @deffn Command semantic-complete-analyze-inline-idle This is the command for performing inline code completion. It is called by Semantic Idle Completions mode during idle time, but you can @@ -751,7 +724,6 @@ a state for inline completion. @end deffn -@anchor{semantic-complete-inline-analyzer-idle-displayor-class} @deffn Option semantic-complete-inline-analyzer-idle-displayor-class The value of this variable determines how @code{semantic-complete-analyze-inline-idle} shows its completions. @@ -789,16 +761,14 @@ @subsection Smart Completion The Semantic Analyzer can be used to perform code completion in a -manner that takes the local context into account. - -In addition to the user commands documented in this section, the -completions performed by Semantic Idle Completions mode also uses the -Semantic Analyzer. @xref{Idle Completions Mode}. +manner that takes the local context into account. (In addition to the +user commands in this section, Semantic Idle Completions mode also +uses the Semantic Analyzer. @xref{Idle Completions Mode}.) @deffn Command semantic-analyze-possible-completions context This is the most basic command for Semantic Analyzer-based completion. -Called interactively, it displays in another window a list of the -possible completions for the symbol at point. +Called interactively, it displays a list of the possible completions +for the symbol at point. When called from a Lisp program, @code{semantic-analyze-possible-completions} does not display a @@ -818,7 +788,6 @@ @code{semantic-analyze-possible-completions} internally. @end deffn -@anchor{semantic-complete-analyze-inline} @deffn Command semantic-complete-analyze-inline This command is bound to @kbd{C-c , @key{SPC}} when Semantic mode is enabled (@pxref{Semantic mode user commands}). It displays a list of @@ -836,7 +805,6 @@ idle time (@pxref{Idle Completions Mode}). @end deffn -@anchor{semantic-complete-inline-analyzer-displayor-class} @deffn Option semantic-complete-inline-analyzer-idle-displayor-class The value of this variable determines how @code{semantic-complete-analyze-inline} shows its completions. @@ -860,9 +828,8 @@ the simpler command @code{semantic-ia-complete-symbol point}. This behaves like the usual @kbd{M-@key{TAB}} (@code{complete-symbol}) command (@pxref{Symbol Completion,,,emacs,Emacs manual}), except it -uses Semantic Analyzer. +uses the Semantic Analyzer. -@anchor{semantic-ia-complete-symbol} @deffn Command semantic-ia-complete-symbol point Complete the current symbol at @var{point}. @end deffn @@ -870,22 +837,19 @@ @node Smart Summary @subsection Smart Summary -You can use the commands in this section to find information about the +You can use the following commands to obtain information about the code at point: -@anchor{semantic-ia-show-summary} @deffn Command semantic-ia-show-summary pos Display a summary for the symbol at @var{pos}. Called interactively, @var{pos} defaults to point. @end deffn -@anchor{semantic-ia-show-doc} @deffn Command semantic-ia-show-doc pos Display the code-level documentation for the symbol at @var{pos}. Called interactively, @var{pos} defaults to point. @end deffn -@anchor{semantic-ia-describe-class} @deffn Command semantic-ia-describe-class typename Prompt for the name of a data type, @var{typename}, and display its components. For instance, if the type in question is a class, this @@ -900,17 +864,13 @@ @subsection Smart Jump The Semantic Analyzer can be used to jump directly to the definition -for a code symbol. Because it is based on code analysis, its behavior -is often more accurate than than the @code{find-tag} command -(@pxref{Tags,,,emacs,Emacs manual}). +for a code symbol. -@anchor{semantic-ia-fast-jump} @deffn Command semantic-ia-fast-jump pos Jump to the definition for the symbol at @var{pos}. Called interactively, @var{pos} defaults to point. @end deffn -@anchor{semantic-ia-fast-mouse-jump} @defun semantic-ia-fast-mouse-jump event Jump to the definition for the symbol at the position of the mouse event @var{event}. This command is meant to be bound to a mouse @@ -921,6 +881,10 @@ @end example @end defun +These commands are often more accurate than than the @code{find-tag} +command (@pxref{Tags,,,emacs,Emacs manual}), because the Semantic +Analyzer is context-sensitive. + You can also use @kbd{C-c , j} (@code{semantic-complete-jump-local}) and @kbd{C-c , J} (@code{semantic-complete-jump}) to navigate tags. @xref{Semantic mode user commands}. Those commands do not make use of @@ -929,15 +893,15 @@ @node Analyzer Debug @subsection Debugging the Semantic Analyzer -In the event that the Semantic Analyzer does not analyze your code -properly, you can take steps to identify and solve the problem. This -section was written with C/C++ in mind, but should be relevant for any -typed language. +If the Semantic Analyzer does not analyze your code properly, you can +take steps to identify and solve the problem. This section was +written with C/C++ in mind, but should be relevant for any typed +language. @subsubsection Step 1: Check the context -The first thing to do is check the current context. You can do this -with @kbd{M-x semantic-analyze-current-context}. +To check the current context, type @kbd{M-x +semantic-analyze-current-context}. @deffn Command semantic-analyze-current-context pos Analyze the context at @var{pos}. This function is used by most of @@ -947,10 +911,10 @@ manual}). When called interactively, this displays a @samp{*Semantic Context -Analysis*} buffer in a separate window. This buffer contains a -summary of the context at point. +Analysis*} buffer containing a summary of the context at point. @end deffn +@noindent The Prefix section of the @samp{*Semantic Context Analysis*} buffer lists the tags based on the text at point. If it shows only a simple string, the Semantic was unable to identify what the data type was. @@ -989,21 +953,15 @@ @subsubsection Step 2 : Check your include path -Once you know what symbol can't be found, the next thing to check is -your include path. Is the header or include file that has the -definitions you need actually in the list of headers @semantic{} is -searching through? To get a basic list, you can use @kbd{M-x -semanticdb-find-test-translate-path}. @xref{Semanticdb search -debugging commands}. +Once you know the missing symbol, check your include path. The header +or include file containing the needed definition may not be in the +list of headers @semantic{} is searching through. To get a basic +list, you can use @kbd{M-x semanticdb-find-test-translate-path}. +@xref{Semanticdb search debugging commands}. -For C++, check to make sure that your project level include files are -in quotes, and not angle brackets. Items in angle brackets are system -includes. - -If items should be loaded but aren't, you may need to update the -search throttle. @xref{Search Throttle}. If you see some tables that -have 0 tags in them, then you you may have an incorrectly set -throttle. For example, +If items should be loaded but aren't, or if you see some tables that +have no tags in them, then you you may have an incorrectly-set search +throttle (@pxref{Search Throttle}). For example, @example *# @@ -1011,9 +969,13 @@ @end example Here, @semantic{} found @file{foo.hh}, but there are 0 tags. This may -be because the throttle was set to not read in and parse files that -Emacs has not yet loaded in. To fix this case, visit the file, and -let @semantic{} parse and save the tags table. +be because you had set the throttle to avoid reading and parsing files +that Emacs has not visited. To fix this, visit the file and let +@semantic{} parse it. + +For C++, check also that the @samp{#include} statements for your +project-level files use quotes, not angle brackets; angle brackets are +for system files. @subsubsection Step 3: Check the local scope @@ -1080,7 +1042,7 @@ The @code{dependants} slot will specify other files that depend on this one. -@section Step 5: Check the parser +@subsubsection Step 5: Check the parser Go to the location where your unfound tag should be. You can call @kbd{M-x bovinate}, and see a dump of the raw tag structure. To see a @@ -1104,6 +1066,271 @@ Or perhaps the parser needs to be fixed. @end enumerate +@node Speedbar +@section Speedbar +@cindex speedbar + +You can integrate @semantic{} with the Speedbar. +@xref{Speedbar,,,emacs,Emacs manual}. To do this, add the following +line to your init file: + +@example +(add-hook 'speedbar-load-hook (lambda () (require 'semantic/sb))) +@end example + +@noindent +Or, alternatively: + +@example +(require 'semantic/sb) +@end example + +Once installed, the Speedbar will use @semantic{} to find and display +tags. Tags from @semantic{} are displayed with more details than +ordinary Speedbar tags, such as function arguments and return type. + +In addition, you can use the Speedbar to show the output of the +Semantic Analyzer (@pxref{Analyzer}). To do this, go to the +@samp{Display} menu item on the Speedbar menu and select +@samp{Analyze}; or type @kbd{M-x semantic-speedbar-analysis}. + +@deffn Command semantic-speedbar-analysis +Start the Speedbar in Semantic Analysis mode. +@end deffn + +In Semantic Analysis mode, the Speedbar displays information about the +local context, such as the current function, local arguments and +variables, and details on the prefix (the current symbol). Each entry +has an @samp{} button; clicking on this shows a summary of what +@semantic{} knows about that variable or type. The Speedbar also +displays a list of possible completions at point. + +@node SymRef +@section Symbol References +@cindex symref + +@semantic{} can interface with external @dfn{symbol reference tools}, +such as GNU Global and GNU Idutils. These tools provide information +about where different tags or symbols appear. + +By default, @semantic{} tries to look for the best external symbol +reference tool that can be used. The supported tools are GNU Global, +GNU Idutils, CScope, and Grep (the fallback method). For best +results, use GNU Global. However, @semantic{} does not manage your +GNU Global tables for you; you must manage them yourself. + +@defvar semantic-symref-tool +The value of this variable is a symbol that determines the external +symbol reference tool to use. The default value, @code{detect}, says +to look for the best available tool. Other possible values are +@code{global}, @code{idutils}, @code{cscope}, and @code{grep}. Note +that @code{grep} is much slower than the others. +@end defvar + +The commands to display symbol references are @kbd{C-c , g} +(@code{semantic-symref-symbol} and @kbd{C-c , G} +(@code{semantic-symref}). These keybindings are available whenever +Semantic mode is enabled (@pxref{Semantic mode user commands}). + +@deffn Command semantic-symref-symbol sym +This command (normally bound to @kbd{C-c , g}) prompts for a symbol +name, and uses an external reference tool to find references to that +tag. +@end deffn + +@deffn Command semantic-symref +This command (normally bound to @kbd{C-c , G}) uses an external +reference tool to find references to the current tag. +@end deffn + +Both @code{semantic-symref-symbol} and @code{semantic-symref} display +a list of symbol references in a separate buffer. The entries are +organized by file, and by function name. Typing @key{RET} on the +@samp{[+]} next to each function name ``expands'' that entry, listing +all references to the target symbol occurring within that function. +Typing @kbd{RET} on a reference line jumps to that reference. + +@node MRU Bookmarks +@section MRU Bookmarks mode +@cindex semantic-mru-bookmark-mode + +Semantic MRU Bookmarks mode is a minor mode that keeps track of the +tags you have edited, allowing you to quickly return to them later +(MRU stands for ``Most Recently Used''). + +@deffn Command global-semantic-mru-bookmark-mode &optional arg +Toggle Semantic MRU Bookmarks mode globally. The minor mode can be +turned on only if the current buffer was set up for parsing. With +argument @var{arg}, turn the minor mode if @var{arg} is positive, and +off otherwise. +@end deffn + +Semantic MRU Bookmarks mode takes note of each tag you edit. +Afterwards, you can type @kbd{C-x B} +(@code{semantic-mrub-switch-tags}) to return to a tag. This command +prompts for a tag name, completing with the names of edited tags; at +the prompt, you can use @kbd{M-p} and @kbd{M-n} to cycle through tags +in order of last modification time. + +@node Sticky Func Mode +@section Sticky Function mode + +Semantic Sticky Function minor mode displays a header line that shows +the declaration line of the function or tag on the topmost line in the +text area. This allows you to keep that declaration line in view at +all times, even if it is scrolls off the ``top'' of the screen. + +In addition, clicking @kbd{Mouse-1} on the header line opens a context +menu that contains menu items for copying, killing, or narrowing to +that tag. + +@deffn Command global-semantic-stickyfunc-mode &optional arg +Toggle Semantic Sticky Function mode in all Semantic-enabled buffers. +With an optional argument @var{arg}, enable if @var{arg} is positive, +and disable otherwise. +@end deffn + +@defvar semantic-stickyfunc-sticky-classes +The value of this variable is a list of tag classes that Semantic +Sticky Function mode makes ``sticky''. The default is +@code{'(function type)}, meaning function declarations and type +declarations. Other possible tag classes are @code{variable}, +@code{include}, and @code{package}. +@end defvar + +@node Highlight Func Mode +@section Highlight Func Mode +@cindex semantic-highlight-func-mode + +Semantic Highlight Function minor mode highlights the declaration line +of the current function or tag (that is to say, the first line that +describes the rest of the construct). + +In addition, clicking @kbd{Mouse-3} on the highlighted declaration +line opens a context menu that contains menu items for copying, +killing, or narrowing to that tag. + +The tag classes highlighted by Semantic Highlight Function mode are +the same ones given by @code{semantic-stickyfunc-sticky-classes}. +@xref{Sticky Func Mode}. + +@defun global-semantic-highlight-func-mode &optional arg +Toggle Semantic Highlight Function mode in all Semantic-enabled +buffers. With an optional argument @var{arg}, enable if @var{arg} is +positive, and disable otherwise. +@end defun + +@deffn Face semantic-highlight-func-current-tag-face +This face is used to highlight declaration lines in Semantic Highlight +Func mode. +@end deffn + +@node Tag Decoration Mode +@section Tag Decoration Mode +@cindex semantic-decoration-mode + +Semantic Tag Decoration mode ``decorates'' each tag based on certain +arbitrary features of that tag. Decorations are specified using the +variable @code{semantic-decoration-styles}. + +@deffn Command global-semantic-decoration-mode &optional arg +Toggle Semantic Tag Decoration mode in all Semantic-enabled buffers. +With an optional argument @var{arg}, enable if @var{arg} is positive, +and disable otherwise. +@end deffn + +@defvar semantic-decoration-styles +The value of this variable is a list of decoration styles for Semantic +Tag Decoration mode. Each element in this list should have the form +@code{(@var{name} . @var{flag})}, where @var{name} is a style name (a +symbol) and @var{flag} is non-@code{nil} if the style is enabled. + +The following styles are available: + +@table @code +@item semantic-tag-boundary +Place an overline in front of each long tag (excluding prototypes). + +@item semantic-decoration-on-private-members +Highlight class members that are designated as private. + +@item semantic-decoration-on-protected-members +Highlight class members that are designated as protected. + +@item semantic-decoration-on-includes +Highlight class members that are includes. Clicking on the +highlighted include statements opens a context menu for configuring +@semantic{} includes. +@end table +@end defvar + +To enable or disable specific decorations, use this function: + +@deffn Command semantic-toggle-decoration-style name &optional arg +Prompt for a decoration style, @var{name}, and turn it on or off. +With prefix argument @var{arg}, turn on if positive, otherwise off. +Return non-@code{nil} if the decoration style is enabled. +@end deffn + +@deffn Face semantic-tag-boundary-face +Face for long tags in the @code{semantic-tag-boundary} decoration +style. +@end deffn + +@deffn Face semantic-decoration-on-private-members-face +Face for privately-scoped tags in the +@code{semantic-decoration-on-private-members} decoration style. +@end deffn + +@deffn Face semantic-decoration-on-protected-members-face +Face for protected tags in the +@code{semantic-decoration-on-protected-members} decoration style. +@end deffn + +@deffn Face semantic-decoration-on-includes +Face for includes that are not in some other state, in the +@code{semantic-decoration-on-includes} decoration style. +@end deffn + +@deffn Face semantic-decoration-on-unknown-includes +Face for includes that cannot be found, in the +@code{semantic-decoration-on-includes} decoration style. +@end deffn + +@deffn Face semantic-decoration-on-unparsed-includes +Face for includes that have not yet been parsed, in the +@code{semantic-decoration-on-includes} decoration style. +@end deffn + +@subsection Creating New Decoration Modes + +You can create new types of decorations using the following function: + +@defun define-semantic-decoration-style name doc &rest flags +Define a new decoration style with @var{name}. +@var{doc} is a documentation string describing the decoration style @var{name}. +It is appended to auto-generated doc strings. +An Optional list of @var{flags} can also be specified. Flags are: + @code{:enabled} - specify the default enabled value for @var{name}. + + +This defines two new overload functions respectively called @code{NAME-p} +and @code{NAME-highlight}, for which you must provide a default +implementation in respectively the functions @code{NAME-p-default} and +@code{NAME-highlight-default}. Those functions are passed a tag. @code{NAME-p} +must return non-@code{nil} to indicate that the tag should be decorated by +@code{NAME-highlight}. + +To put primary decorations on a tag @code{NAME-highlight}, use +functions like @dfn{semantic-set-tag-face}, +@dfn{semantic-set-tag-intangible}, etc., found in the +semantic-decorate library. + +To add other kind of decorations on a tag, @code{NAME-highlight} must use +@dfn{semantic-decorate-tag}, and other functions of the semantic +decoration @var{api} found in this library. +@end defun + @ignore arch-tag: 760dca58-7119-484e-8237-866cbaf36f79 @end ignore diff -r 18ebc6fe2cc9 -r c59fc4a754cc doc/misc/semantic.texi --- a/doc/misc/semantic.texi Mon Dec 14 03:28:34 2009 +0000 +++ b/doc/misc/semantic.texi Mon Dec 14 04:11:43 2009 +0000 @@ -153,8 +153,8 @@ +---------------+ | COMMON | | COMMON |<--- SPEEDBAR Java --->| JAVA PARSER |--->| PARSE | | | +---------------+ | TREE | | PARSE |<--- SEMANTICDB - +---------------+ | FORMAT | | API |<--- ecb - Scheme --->| SCHEME PARSER |--->| | | | + +---------------+ | FORMAT | | API | + Scheme --->| SCHEME PARSER |--->| | | |<--- ecb +---------------+ | | | | +---------------+ | | | | Texinfo --->| TEXI. PARSER |--->| | | | @@ -162,15 +162,6 @@ ... ... ... ... - +---------------+ | | | |<--- app. 1 - Lang. A --->| A Parser |--->| | | | - +---------------+ | | | |<--- app. 2 - +---------------+ | | | | - Lang. B --->| B Parser |--->| | | |<--- app. 3 - +---------------+ | | | | - - ... ... ... ... ... - +---------------+ | | | | Lang. Y --->| Y Parser |--->| | | |<--- app. ? +---------------+ | | | | @@ -231,11 +222,9 @@ @chapter Semantic Internals This chapter provides an overview of the internals of @semantic{}. -This information would not be needed by neither application developers -nor grammar developers. - -It would be useful mostly for the hackers who would like to learn -more about how @semantic{} works. +This information is usually not needed by application developers or +grammar developers; it is useful mostly for the hackers who would like +to learn more about how @semantic{} works. @menu * Parser code :: Code used for the parsers