# HG changeset patch # User Chong Yidong # Date 1272924083 14400 # Node ID e2da1d33db9526e59729149fc0b97be1bb7be304 # Parent f51f0593c8409692f2a70f1359d4ef4b8002fea6 Fix typos (Bug#6094). From tpn Nmec. diff -r f51f0593c840 -r e2da1d33db95 ChangeLog --- a/ChangeLog Sun May 02 21:55:01 2010 -0400 +++ b/ChangeLog Mon May 03 18:01:23 2010 -0400 @@ -1,3 +1,7 @@ +2010-05-03 Štěpán Němec (tiny change) + + * INSTALL: Fix typos. + 2010-05-03 Chong Yidong * configure.in: Add check for buggy version of GCC (Bug#6031). diff -r f51f0593c840 -r e2da1d33db95 INSTALL --- a/INSTALL Sun May 02 21:55:01 2010 -0400 +++ b/INSTALL Mon May 03 18:01:23 2010 -0400 @@ -408,7 +408,7 @@ switch to the compiler, and link against libfoo.a and libbar.a libraries in addition to the standard ones. -For some libraries, like Gtk+, fontconfig and ALSA, `configure' use +For some libraries, like Gtk+, fontconfig and ALSA, `configure' uses pkg-config to find where those libraries are installed. If you want pkg-config to look in special directories, you have to set the environment variable PKG_CONFIG_PATH to point to the directories @@ -466,7 +466,7 @@ documentation strings to be in the etc/DOC file (see src/Makefile.in if you wish to figure out how to do that). For all else, use site-init.el. Do not load byte-compiled code which -was build with a non-nil value of `byte-compile-dynamic'. +was built with a non-nil value of `byte-compile-dynamic'. If you set load-path to a different value in site-init.el or site-load.el, Emacs will use *precisely* that value when it starts up @@ -491,7 +491,7 @@ copying it, if you wish; then it automatically uses the sibling directories ../lisp, ../lib-src, ../info. -Or you can "install" the executable and the other Emacs into their +Or you can "install" the executable and the other files into their installed locations, with `make install'. By default, Emacs's files are installed in the following directories: diff -r f51f0593c840 -r e2da1d33db95 doc/emacs/ChangeLog --- a/doc/emacs/ChangeLog Sun May 02 21:55:01 2010 -0400 +++ b/doc/emacs/ChangeLog Mon May 03 18:01:23 2010 -0400 @@ -1,3 +1,10 @@ +2010-05-03 Štěpán Němec (tiny change) + + * programs.texi (Man Page): + * misc.texi (Invoking emacsclient): + * mini.texi (Repetition): + * mark.texi (Setting Mark): Fix typos. + 2010-04-25 Chong Yidong * misc.texi (Printing): Document htmlfontify-buffer. diff -r f51f0593c840 -r e2da1d33db95 doc/emacs/mark.texi --- a/doc/emacs/mark.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/emacs/mark.texi Mon May 03 18:01:23 2010 -0400 @@ -80,7 +80,7 @@ character in @acronym{ASCII}; usually, typing @kbd{C-@key{SPC}} on a text terminal gives the character @kbd{C-@@}. This key is also bound to @code{set-mark-command}, so unless you are unlucky enough to have -an text terminal that behaves differently, you might as well think of +a text terminal that behaves differently, you might as well think of @kbd{C-@@} as @kbd{C-@key{SPC}}.}. This sets the mark where point is, and activates it. You can then move point away, leaving the mark behind. diff -r f51f0593c840 -r e2da1d33db95 doc/emacs/mini.texi --- a/doc/emacs/mini.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/emacs/mini.texi Mon May 03 18:01:23 2010 -0400 @@ -601,7 +601,7 @@ unchanged. You can also change the command by editing the Lisp expression before you execute it. The repeated command is added to the front of the command history unless it is identical to the most -recently item. +recent item. Once inside the minibuffer for @kbd{C-x @key{ESC} @key{ESC}}, you can use the minibuffer history commands (@kbd{M-p}, @kbd{M-n}, @kbd{M-r}, diff -r f51f0593c840 -r e2da1d33db95 doc/emacs/misc.texi --- a/doc/emacs/misc.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/emacs/misc.texi Mon May 03 18:01:23 2010 -0400 @@ -1528,7 +1528,7 @@ @kbd{C-x #} (@code{server-edit}) in its buffer. This saves the file and sends a message back to the @command{emacsclient} program, telling it to exit. Programs that use @env{EDITOR} usually wait for the -``editor''---in the case @command{emacsclient}---to exit before doing +``editor''---in this case @command{emacsclient}---to exit before doing something else. You can also call @command{emacsclient} with multiple file name diff -r f51f0593c840 -r e2da1d33db95 doc/emacs/programs.texi --- a/doc/emacs/programs.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/emacs/programs.texi Mon May 03 18:01:23 2010 -0400 @@ -1202,7 +1202,7 @@ your machine; the list of available manual pages is computed automatically the first time you invoke @code{woman}. The word at point in the current buffer is used to suggest the default for the -name the manual page. +name of the manual page. With a numeric argument, @kbd{M-x woman} recomputes the list of the manual pages used for completion. This is useful if you add or delete diff -r f51f0593c840 -r e2da1d33db95 doc/lispref/ChangeLog --- a/doc/lispref/ChangeLog Sun May 02 21:55:01 2010 -0400 +++ b/doc/lispref/ChangeLog Mon May 03 18:01:23 2010 -0400 @@ -1,3 +1,12 @@ +2010-05-03 Štěpán Němec (tiny change) + + * windows.texi (Textual Scrolling): + * tips.texi (Coding Conventions): + * minibuf.texi (Minibuffer History): + * maps.texi (Standard Keymaps): + * loading.texi (Where Defined): + * edebug.texi (Instrumenting): Fix typos. + 2010-04-25 Chong Yidong * keymaps.texi (Menu Bar): Document :advertised-binding property. diff -r f51f0593c840 -r e2da1d33db95 doc/lispref/edebug.texi --- a/doc/lispref/edebug.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/lispref/edebug.texi Mon May 03 18:01:23 2010 -0400 @@ -186,7 +186,7 @@ While Edebug is active, the command @kbd{I} (@code{edebug-instrument-callee}) instruments the definition of the -function or macro called by the list form after point, if is not already +function or macro called by the list form after point, if it is not already instrumented. This is possible only if Edebug knows where to find the source for that function; for this reason, after loading Edebug, @code{eval-region} records the position of every definition it diff -r f51f0593c840 -r e2da1d33db95 doc/lispref/loading.texi --- a/doc/lispref/loading.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/lispref/loading.texi Mon May 03 18:01:23 2010 -0400 @@ -823,7 +823,7 @@ @code{load-history}. @defvar load-history -This value of this variable is an alist that associates the names of +The value of this variable is an alist that associates the names of loaded library files with the names of the functions and variables they defined, as well as the features they provided or required. diff -r f51f0593c840 -r e2da1d33db95 doc/lispref/locals.texi --- a/doc/lispref/locals.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/lispref/locals.texi Mon May 03 18:01:23 2010 -0400 @@ -85,6 +85,9 @@ @item case-fold-search @xref{Searching and Case}. +@item comment-column +@xref{Comments,,, emacs, The GNU Emacs Manual}. + @item ctl-arrow @xref{Usual Display}. @@ -94,9 +97,6 @@ @item cursor-type @xref{Cursor Parameters}. -@item comment-column -@xref{Comments,,, emacs, The GNU Emacs Manual}. - @item default-directory @xref{File Name Expansion}. diff -r f51f0593c840 -r e2da1d33db95 doc/lispref/maps.texi --- a/doc/lispref/maps.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/lispref/maps.texi Mon May 03 18:01:23 2010 -0400 @@ -163,7 +163,7 @@ @item key-translation-map A keymap for translating keys. This one overrides ordinary key -bindings, unlike @code{local- function-key-map}. @xref{Translation +bindings, unlike @code{local-function-key-map}. @xref{Translation Keymaps}. @item kmacro-map diff -r f51f0593c840 -r e2da1d33db95 doc/lispref/minibuf.texi --- a/doc/lispref/minibuf.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/lispref/minibuf.texi Mon May 03 18:01:23 2010 -0400 @@ -511,7 +511,7 @@ @defopt history-length The value of this variable specifies the maximum length for all history lists that don't specify their own maximum lengths. If the -value is @code{t}, that means there no maximum (don't delete old +value is @code{t}, that means there is no maximum (don't delete old elements). The value of @code{history-length} property of the history list variable's symbol, if set, overrides this variable for that particular history list. diff -r f51f0593c840 -r e2da1d33db95 doc/lispref/tips.texi --- a/doc/lispref/tips.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/lispref/tips.texi Mon May 03 18:01:23 2010 -0400 @@ -90,7 +90,7 @@ If a file requires certain other Lisp programs to be loaded beforehand, then the comments at the beginning of the file should say so. Also, use @code{require} to make sure they are loaded. -x@xref{Named Features}. +@xref{Named Features}. @item If a file @var{foo} uses a macro defined in another file @var{bar}, diff -r f51f0593c840 -r e2da1d33db95 doc/lispref/windows.texi --- a/doc/lispref/windows.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/lispref/windows.texi Mon May 03 18:01:23 2010 -0400 @@ -1661,8 +1661,8 @@ @end defopt @defopt scroll-step -This variable is an older variant of @code{scroll-conservatively}. The -difference is that it if its value is @var{n}, that permits scrolling +This variable is an older variant of @code{scroll-conservatively}. +The difference is that if its value is @var{n}, that permits scrolling only by precisely @var{n} lines, not a smaller number. This feature does not work with @code{scroll-margin}. The default value is zero. @end defopt diff -r f51f0593c840 -r e2da1d33db95 doc/misc/ChangeLog --- a/doc/misc/ChangeLog Sun May 02 21:55:01 2010 -0400 +++ b/doc/misc/ChangeLog Mon May 03 18:01:23 2010 -0400 @@ -1,3 +1,9 @@ +2010-05-03 Štěpán Němec (tiny change) + + * url.texi (HTTP language/coding, Customization): + * message.texi (Header Commands, Responses): + * cl.texi (Argument Lists): Fix typos. + 2010-04-18 Chong Yidong * ede.texi (EDE Mode): Refer to init file rather than `.emacs'. Note diff -r f51f0593c840 -r e2da1d33db95 doc/misc/cl.texi --- a/doc/misc/cl.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/misc/cl.texi Mon May 03 18:01:23 2010 -0400 @@ -356,7 +356,7 @@ calls to it may be expanded into in-line code by the byte compiler. This is analogous to the @code{defsubst} form; @code{defsubst*} uses a different method (compiler macros) which -works in all version of Emacs, and also generates somewhat more +works in all versions of Emacs, and also generates somewhat more efficient inline expansions. In particular, @code{defsubst*} arranges for the processing of keyword arguments, default values, etc., to be done at compile-time whenever possible. diff -r f51f0593c840 -r e2da1d33db95 doc/misc/message.texi --- a/doc/misc/message.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/misc/message.texi Mon May 03 18:01:23 2010 -0400 @@ -659,7 +659,7 @@ @findex message-insert-disposition-notification-to Insert a request for a disposition notification. (@code{message-insert-disposition-notification-to}). -This means that if the recipient support RFC 2298 she might send you a +This means that if the recipient supports RFC 2298 she might send you a notification that she received the message. @item M-x message-insert-importance-high @@ -2387,7 +2387,7 @@ @item wide reply A @dfn{wide reply} is a mail response that includes @emph{all} entities -mentioned in the message you are responded to. All mailboxes from the +mentioned in the message you are responding to. All mailboxes from the following headers will be concatenated to form the outgoing @code{To}/@code{Cc} headers: diff -r f51f0593c840 -r e2da1d33db95 doc/misc/url.texi --- a/doc/misc/url.texi Sun May 02 21:55:01 2010 -0400 +++ b/doc/misc/url.texi Mon May 03 18:01:23 2010 -0400 @@ -313,7 +313,7 @@ variables, the value is a string; it can specify a single choice, or it can be a comma-separated list. -Normally this list ordered by descending preference. However, each +Normally, this list is ordered by descending preference. However, each element can be followed by @samp{;q=@var{priority}} to specify its preference level, a decimal number from 0 to 1; e.g., for @code{url-mime-language-string}, @w{@code{"de, en-gb;q=0.8, @@ -1120,11 +1120,11 @@ @defopt url-debug @cindex debugging -Specifies the types of debug messages the library which are logged to +Specifies the types of debug messages which are logged to the @code{*URL-DEBUG*} buffer. @code{t} means log all messages. A number means log all messages and show them with @code{message}. -If may also be a list of the types of messages to be logged. +It may also be a list of the types of messages to be logged. @end defopt @defopt url-personal-mail-address @end defopt diff -r f51f0593c840 -r e2da1d33db95 etc/NEWS --- a/etc/NEWS Sun May 02 21:55:01 2010 -0400 +++ b/etc/NEWS Mon May 03 18:01:23 2010 -0400 @@ -1350,11 +1350,11 @@ ** Gnus *** The Gnus package has been updated -There are many news features, bug fixes and improvements; see the file +There are many new features, bug fixes and improvements; see the file GNUS-NEWS or the node "No Gnus" in the Gnus manual for details. *** In Emacs 23, Gnus uses Emacs' new internal coding system `utf-8-emacs' for -saving articles drafts and ~/.newsrc.eld. These file may not be read +saving articles, drafts, and ~/.newsrc.eld. These file may not be read correctly in Emacs 22 and below. If you want to Gnus across different Emacs versions, you may set `mm-auto-save-coding-system' to `emacs-mule'. @@ -1407,8 +1407,8 @@ *** `C-h C-h' in Isearch mode displays isearch-specific Help screen, `C-h b' displays all Isearch key bindings, `C-h k' displays the full documentation of the given Isearch key sequence, `C-h m' displays -documentation of Isearch mode. All the rest Help commands exit Isearch mode -and execute their global definitions. +documentation for Isearch mode. All the other Help commands exit +Isearch mode and execute their global definitions. *** When started in the minibuffer, Isearch searches in the minibuffer history. See `Minibuffer changes', above. diff -r f51f0593c840 -r e2da1d33db95 etc/enriched.doc --- a/etc/enriched.doc Sun May 02 21:55:01 2010 -0400 +++ b/etc/enriched.doc Mon May 03 18:01:23 2010 -0400 @@ -219,7 +219,7 @@ paragraph properly filled all the time, without slowing down editing too much. Refill mode is a start at this, but needs - improvment. + improvement. + Refill after yank. [Refill mode does that.] @@ -272,4 +272,4 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License - along with this program. If not, see . + along with this program. If not, see <.