Mercurial > emacs

changeset 64772:060177e931f8

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Sync with Tramp 2.0.50.
author Michael Albinus <michael.albinus@gmx.de>
date Sun, 07 Aug 2005 15:42:42 +0000
parents ef0eb1c0d920
children aebbf7125281
files lisp/ChangeLog lisp/net/tramp-ftp.el lisp/net/tramp-smb.el lisp/net/tramp-uu.el lisp/net/tramp.el lisp/net/trampver.el man/ChangeLog man/tramp.texi man/trampver.texi
diffstat 9 files changed, 347 insertions(+), 298 deletions(-) [+]
line wrap: on
line diff
--- a/lisp/ChangeLog	Sun Aug 07 12:46:16 2005 +0000
+++ b/lisp/ChangeLog	Sun Aug 07 15:42:42 2005 +0000
@@ -1,3 +1,57 @@
+2005-08-07  Michael Albinus  <michael.albinus@gmx.de>
+
+	Sync with Tramp 2.0.50.
+
+	* tramp.el: Remove defvar of `last-coding-system-used' in the
+	XEmacs case; not necessary anymore.
+	(tramp-user-regexp): Allow "@" as part of user name.
+	(tramp-handle-set-visited-file-modtime)
+	(tramp-handle-insert-file-contents)
+	(tramp-handle-write-region): No special handling for
+	`last-coding-system-used, because this is done in
+	`tramp-accept-process-output' now.
+	(tramp-accept-process-output): New defun.
+	(tramp-process-one-action, tramp-process-one-multi-action)
+	(tramp-wait-for-regexp, tramp-wait-for-output)
+	(tramp-discard-garbage-erase-buffer): Call it.  Reported by David
+	Howells <dhowells@redhat.com>.
+	(clear-visited-file-modtime): Defadvice removed.  The check for
+	unset buffer's modtime does not need to be based on
+	`tramp-buffer-file-attributes'.  Suggested by RMS.
+	(tramp-message): Insert "\n" if not being at beginning of line.
+	(tramp-find-shell): Use `tramp-barf-if-no-shell-prompt' for code
+	sequence with same logic.
+	(tramp-completion-handle-expand-file-name): Discard call of
+	`tramp-drop-volume-letter'.  It is not necessary, and there have
+	been problems with (expand-file-name "~/.netrc" "/") in ange-ftp.
+	Reported by Richard G. Bielawski
+	<Richard.G.Bielawski@wellsfargo.com>.
+	(tramp-do-copy-or-rename-file-out-of-band): Transfer message
+	should always be visible.
+	(tramp-handle-insert-directory, tramp-setup-complete)
+	(tramp-set-process-query-on-exit-flag)
+	(tramp-append-tramp-buffers): Pacify byte-compiler.
+	(tramp-bug): Delete non-existing variables from list.  Apply
+	`tramp-load-report-modules' as pre-hook.  Mask
+	`tramp-password-prompt-regexp', `tramp-shell-prompt-pattern' and
+	`shell-prompt-pattern' because of non-7bit characters.  Reported
+	by Sebastian Luque <sluque@mun.ca>.
+	(tramp-reporter-dump-variable, tramp-load-report-modules): New
+	defuns.
+	(tramp-match-string-list): Remove function.
+	(tramp-wait-for-regexp): Remove call of that function.  Suggested
+	by Kim F. Storm <storm@cua.dk>.
+	(tramp-set-auto-save-file-modes): Use octal integer code #o600
+	instead of octal character code ?\600.  The latter resulted in a
+	syntax error with XEmacs.
+
+	* tramp-smb.el: Remove defvar of `last-coding-system-used' in the
+	XEmacs case; not necessary anymore.
+	(tramp-smb-handle-write-region): No special handling for
+	`last-coding-system-used, because this is done in
+	`tramp-accept-process-output' now.
+	(tramp-smb-wait-for-output): Call `tramp-accept-process-output'.
+
 2005-08-06  Luc Teirlinck  <teirllm@auburn.edu>
 
 	* wid-edit.el (widget-choice-value-create): Unconditionally
--- a/lisp/net/tramp-ftp.el	Sun Aug 07 12:46:16 2005 +0000
+++ b/lisp/net/tramp-ftp.el	Sun Aug 07 15:42:42 2005 +0000
@@ -1,8 +1,8 @@
-;;; tramp-ftp.el --- Tramp convenience functions for Ange-FTP and EFS -*- coding: iso-8859-1; -*-
+;;; tramp-ftp.el --- Tramp convenience functions for Ange-FTP -*- coding: iso-8859-1; -*-
 
 ;; Copyright (C) 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-;; Author: Michael Albinus <Michael.Albinus@alcatel.de>
+;; Author: Michael Albinus <michael.albinus@gmx.de>
 ;; Keywords: comm, processes
 
 ;; This file is part of GNU Emacs.
--- a/lisp/net/tramp-smb.el	Sun Aug 07 12:46:16 2005 +0000
+++ b/lisp/net/tramp-smb.el	Sun Aug 07 15:42:42 2005 +0000
@@ -46,11 +46,6 @@
       (defalias 'warnings 'identity) ; Pacify Emacs byte-compiler
       (byte-compiler-options (warnings (- unused-vars))))))
 
-;; XEmacs byte-compiler raises warning abouts `last-coding-system-used'.
-(eval-when-compile
-  (unless (boundp 'last-coding-system-used)
-    (defvar last-coding-system-used nil)))
-
 ;; Define SMB method ...
 (defcustom tramp-smb-method "smb"
   "*Method to connect SAMBA and M$ SMB servers."
@@ -598,13 +593,6 @@
       (let ((share (tramp-smb-get-share localname))
 	    (file (tramp-smb-get-localname localname t))
 	    (curbuf (current-buffer))
-	    ;; We use this to save the value of `last-coding-system-used'
-	    ;; after writing the tmp file.  At the end of the function,
-	    ;; we set `last-coding-system-used' to this saved value.
-	    ;; This way, any intermediary coding systems used while
-	    ;; talking to the remote shell or suchlike won't hose this
-	    ;; variable.  This approach was snarfed from ange-ftp.el.
-	    coding-system-used
 	    tmpfil)
 	;; Write region into a tmp file.
 	(setq tmpfil (tramp-make-temp-file))
@@ -616,9 +604,6 @@
 	 (if confirm ; don't pass this arg unless defined for backward compat.
 	     (list start end tmpfil append 'no-message lockname confirm)
 	   (list start end tmpfil append 'no-message lockname)))
-	;; Now, `last-coding-system-used' has the right value.  Remember it.
-	(when (boundp 'last-coding-system-used)
-	  (setq coding-system-used last-coding-system-used))
 
 	(tramp-smb-maybe-open-connection user host share)
 	(tramp-message-for-buffer
@@ -636,10 +621,7 @@
 	  (error "Buffer has changed from `%s' to `%s'"
 		 curbuf (current-buffer)))
 	(when (eq visit t)
-	  (set-visited-file-modtime))
-	;; Make `last-coding-system-used' have the right value.
-	(when (boundp 'last-coding-system-used)
-	  (setq last-coding-system-used coding-system-used))))))
+	  (set-visited-file-modtime))))))
 
 
 ;; Internal file name functions
@@ -1000,7 +982,7 @@
     (while (and (not found) (not err))
 
       ;; Accept pending output.
-      (accept-process-output proc)
+      (tramp-accept-process-output proc)
 
       ;; Search for prompt.
       (goto-char (point-min))
--- a/lisp/net/tramp-uu.el	Sun Aug 07 12:46:16 2005 +0000
+++ b/lisp/net/tramp-uu.el	Sun Aug 07 15:42:42 2005 +0000
@@ -3,7 +3,7 @@
 
 ;; Copyright (C) 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-;; Author: Kai Gro,A_(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
+;; Author: Kai Gro,A_(Bjohann <kai.grossjohann@gmx.net>
 ;; Keywords: comm, terminals
 
 ;; This file is free software; you can redistribute it and/or modify
--- a/lisp/net/tramp.el	Sun Aug 07 12:46:16 2005 +0000
+++ b/lisp/net/tramp.el	Sun Aug 07 15:42:42 2005 +0000
@@ -4,7 +4,8 @@
 ;; Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 ;;   2005 Free Software Foundation, Inc.
 
-;; Author: kai.grossjohann@gmx.net
+;; Author: Kai Gro,A_(Bjohann <kai.grossjohann@gmx.net>
+;;         Michael Albinus <michael.albinus@gmx.de>
 ;; Keywords: comm, processes
 
 ;; This file is part of GNU Emacs.
@@ -147,11 +148,6 @@
   (when (boundp 'byte-compile-not-obsolete-var)
     (setq byte-compile-not-obsolete-var 'directory-sep-char)))
 
-;; XEmacs byte-compiler raises warning abouts `last-coding-system-used'.
-(eval-when-compile
-  (unless (boundp 'last-coding-system-used)
-    (defvar last-coding-system-used nil)))
-
 ;;; User Customizable Internal Variables:
 
 (defgroup tramp nil
@@ -1031,7 +1027,7 @@
   :type 'regexp)
 
 (defcustom tramp-user-regexp
-  "[^:@/ \t]*"
+  "[^:/ \t]*"
   "*Regexp matching user names."
   :group 'tramp
   :type 'regexp)
@@ -1914,7 +1910,9 @@
 	  tramp-current-multi-method tramp-current-method
 	  tramp-current-user tramp-current-host))
         (goto-char (point-max))
-        (tramp-insert-with-face
+	(unless (bolp)
+	  (insert "\n"))
+	(tramp-insert-with-face
          'italic
          (concat "# " (apply #'format fmt-string args) "\n"))))))
 
@@ -2370,16 +2368,13 @@
 	   (buffer-name)))
   (if time-list
       (tramp-run-real-handler 'set-visited-file-modtime (list time-list))
-    (let ((f (buffer-file-name))
-	  (coding-system-used nil))
+    (let ((f (buffer-file-name)))
       (with-parsed-tramp-file-name f nil
 	(let* ((attr (file-attributes f))
 	       ;; '(-1 65535) means file doesn't exists yet.
 	       (modtime (or (nth 5 attr) '(-1 65535))))
 	  ;; We use '(0 0) as a don't-know value.  See also
 	  ;; `tramp-handle-file-attributes-with-ls'.
-	  (when (boundp 'last-coding-system-used)
-	    (setq coding-system-used last-coding-system-used))
 	  (if (not (equal modtime '(0 0)))
 	      (tramp-run-real-handler 'set-visited-file-modtime (list modtime))
 	    (save-excursion
@@ -2392,9 +2387,7 @@
 	      (setq attr (buffer-substring (point)
 					   (progn (end-of-line) (point)))))
 	    (setq tramp-buffer-file-attributes attr))
-	  (when (boundp 'last-coding-system-used)
-	    (setq last-coding-system-used coding-system-used))
-	nil)))))
+	  nil)))))
 
 ;; CCC continue here
 
@@ -2412,7 +2405,7 @@
     ;; recorded last modification time.
     (if (or (not (buffer-file-name))
 	    (eq (visited-file-modtime) 0))
-      t
+	t
       (let ((f (buffer-file-name)))
 	(with-parsed-tramp-file-name f nil
 	  (let* ((attr (file-attributes f))
@@ -2447,12 +2440,6 @@
 	     ;; if and only if that agrees with the buffer's record.
 	     (t (equal mt '(-1 65535))))))))))
 
-(defadvice clear-visited-file-modtime (after tramp activate)
-  "Set `tramp-buffer-file-attributes' back to nil.
-Tramp uses this variable as an emulation for the actual modtime of the file,
-if the remote host can't provide the modtime."
-  (setq tramp-buffer-file-attributes nil))
-
 (defun tramp-handle-set-file-modes (filename mode)
   "Like `set-file-modes' for tramp files."
   (with-parsed-tramp-file-name filename nil
@@ -3137,8 +3124,7 @@
 	    tramp-current-method method
 	    tramp-current-user user
 	    tramp-current-host host)
-      (tramp-message
-       5 "Transferring %s to file %s..." filename newname)
+      (message "Transferring %s to %s..." filename newname)
 
       ;; Use rcp-like program for file transfer.
       (let ((p (apply 'start-process (buffer-name trampbuf) trampbuf
@@ -3147,8 +3133,7 @@
 	(tramp-process-actions p multi-method method user host
 			       tramp-actions-copy-out-of-band))
       (kill-buffer trampbuf)
-      (tramp-message
-       5 "Transferring %s to file %s...done" filename newname)
+      (message "Transferring %s to %s...done" filename newname)
 
       ;; Set the mode.
       (unless keep-date
@@ -3319,7 +3304,7 @@
   (filename switches &optional wildcard full-directory-p)
   "Like `insert-directory' for tramp files."
   (if (and (boundp 'ls-lisp-use-insert-directory-program)
-           (not ls-lisp-use-insert-directory-program))
+           (not (symbol-value 'ls-lisp-use-insert-directory-program)))
       (tramp-run-real-handler 'insert-directory
                               (list filename switches wildcard full-directory-p))
     ;; For the moment, we assume that the remote "ls" program does not
@@ -3505,7 +3490,7 @@
 ;; Remote commands.
 
 (defvar tramp-async-proc nil
-  "Global variable keeping asyncronous process object.
+  "Global variable keeping asynchronous process object.
 Used in `tramp-handle-shell-command'")
 
 (defun tramp-handle-shell-command (command &optional output-buffer error-buffer)
@@ -3762,7 +3747,6 @@
 			      'insert-file-contents)
 		      'file-local-copy)))
 	       (file-local-copy filename)))
-	    (coding-system-used nil)
 	    (result nil))
 	(when visit
 	  (setq buffer-file-name filename)
@@ -3772,15 +3756,10 @@
 	 multi-method method user host
 	 9 "Inserting local temp file `%s'..." local-copy)
 	(setq result (insert-file-contents local-copy nil beg end replace))
-	;; Now `last-coding-system-used' has right value.  Remember it.
-	(when (boundp 'last-coding-system-used)
-	  (setq coding-system-used last-coding-system-used))
 	(tramp-message-for-buffer
 	 multi-method method user host
 	 9 "Inserting local temp file `%s'...done" local-copy)
 	(delete-file local-copy)
-	(when (boundp 'last-coding-system-used)
-	  (setq last-coding-system-used coding-system-used))
 	(list (expand-file-name filename)
 	      (second result))))))
 
@@ -3845,7 +3824,7 @@
   ;;              (string= lockname filename))
   ;;    (error
   ;;     "tramp-handle-write-region: LOCKNAME must be nil or equal FILENAME"))
-  ;; XEmacs takes a coding system as the sevent argument, not `confirm'
+  ;; XEmacs takes a coding system as the seventh argument, not `confirm'
   (when (and (not (featurep 'xemacs))
 	     confirm (file-exists-p filename))
     (unless (y-or-n-p (format "File %s exists; overwrite anyway? "
@@ -3859,13 +3838,6 @@
 	  (loc-dec (tramp-get-local-decoding multi-method method user host))
 	  (trampbuf (get-buffer-create "*tramp output*"))
 	  (modes (file-modes filename))
-	  ;; We use this to save the value of `last-coding-system-used'
-	  ;; after writing the tmp file.  At the end of the function,
-	  ;; we set `last-coding-system-used' to this saved value.
-	  ;; This way, any intermediary coding systems used while
-	  ;; talking to the remote shell or suchlike won't hose this
-	  ;; variable.  This approach was snarfed from ange-ftp.el.
-	  coding-system-used
 	  tmpfil)
       ;; Write region into a tmp file.  This isn't really needed if we
       ;; use an encoding function, but currently we use it always
@@ -3887,9 +3859,6 @@
       ;; the backup file.  This case `save-buffer' handles
       ;; permissions.
       (when modes (set-file-modes tmpfil modes))
-      ;; Now, `last-coding-system-used' has the right value.  Remember it.
-      (when (boundp 'last-coding-system-used)
-	(setq coding-system-used last-coding-system-used))
       ;; This is a bit lengthy due to the different methods possible for
       ;; file transfer.  First, we check whether the method uses an rcp
       ;; program.  If so, we call it.  Otherwise, both encoding and
@@ -3991,9 +3960,6 @@
 	 ;; We must pass modtime explicitely, because filename can be different
 	 ;; from (buffer-file-name), f.e. if `file-precious-flag' is set.
 	 (nth 5 (file-attributes filename))))
-      ;; Make `last-coding-system-used' have the right value.
-      (when (boundp 'last-coding-system-used)
-	(setq last-coding-system-used coding-system-used))
       (when (or (eq visit t)
 		(eq visit nil)
 		(stringp visit))
@@ -4301,7 +4267,7 @@
         (symbol-function 'PC-expand-many-files))
   (defun PC-expand-many-files (name)
     (if (tramp-tramp-file-p name)
-        (expand-many-files name)
+        (funcall (symbol-function 'expand-many-files) name)
       (tramp-save-PC-expand-many-files name))))
 
 ;; Why isn't eval-after-load sufficient?
@@ -4825,12 +4791,11 @@
 (defun tramp-completion-handle-expand-file-name (name &optional dir)
   "Like `expand-file-name' for tramp files."
   (let ((fullname (concat (or dir default-directory) name)))
-    (tramp-drop-volume-letter
-     (if (tramp-completion-mode fullname)
-	 (tramp-run-real-handler
-	  'expand-file-name (list name dir))
-       (tramp-completion-run-real-handler
-	'expand-file-name (list name dir))))))
+    (if (tramp-completion-mode fullname)
+	(tramp-run-real-handler
+	 'expand-file-name (list name dir))
+      (tramp-completion-run-real-handler
+       'expand-file-name (list name dir)))))
 
 ;;; Internal Functions:
 
@@ -5127,12 +5092,9 @@
       (tramp-send-command
        multi-method method user host
        (concat "PS1='$ ' exec " shell)) ;
-      (unless (tramp-wait-for-regexp
-               (get-buffer-process (current-buffer))
-               60 (format "\\(\\(%s\\)\\|\\(%s\\)\\)\\'"
-			  tramp-shell-prompt-pattern shell-prompt-pattern))
-        (pop-to-buffer (buffer-name))
-        (error "Couldn't find remote `%s' prompt" shell))
+      (tramp-barf-if-no-shell-prompt
+       (get-buffer-process (current-buffer))
+       60 "Couldn't find remote `%s' prompt" shell)
       (tramp-message
        9 "Setting remote shell prompt...")
       ;; Douglas Gray Stephens <DGrayStephens@slb.com> says that we
@@ -5331,7 +5293,7 @@
     (tramp-message 9 "Waiting 60s for prompt from remote shell")
     (with-timeout (60 (throw 'tramp-action 'timeout))
       (while (not found)
-	(accept-process-output p 1)
+	(tramp-accept-process-output p 1)
 	(goto-char (point-min))
 	(setq todo actions)
 	(while todo
@@ -5368,7 +5330,7 @@
     (tramp-message 9 "Waiting 60s for prompt from remote shell")
     (with-timeout (60 (throw 'tramp-action 'timeout))
       (while (not found)
-	(accept-process-output p 1)
+	(tramp-accept-process-output p 1)
 	(setq todo actions)
 	(goto-char (point-min))
 	(while todo
@@ -5757,6 +5719,14 @@
 
 ;; Utility functions.
 
+(defun tramp-accept-process-output
+  (&optional process timeout timeout-msecs)
+  "Like `accept-process-output' for Tramp processes.
+This is needed in order to hide `last-coding-system-used', which is set
+for process communication also."
+  (let (last-coding-system-used)
+    (accept-process-output process timeout timeout-msecs)))
+
 (defun tramp-wait-for-regexp (proc timeout regexp)
   "Wait for a REGEXP to appear from process PROC within TIMEOUT seconds.
 Expects the output of PROC to be sent to the current buffer.  Returns
@@ -5773,20 +5743,18 @@
                           timeout))
              (with-timeout (timeout)
                (while (not found)
-                 (accept-process-output proc 1)
+                 (tramp-accept-process-output proc 1)
 		 (unless (memq (process-status proc) '(run open))
 		   (error "Process has died"))
                  (goto-char (point-min))
-                 (setq found (when (re-search-forward regexp nil t)
-                               (tramp-match-string-list)))))))
+                 (setq found (re-search-forward regexp nil t))))))
           (t
            (while (not found)
-             (accept-process-output proc 1)
+             (tramp-accept-process-output proc 1)
 	     (unless (memq (process-status proc) '(run open))
 	       (error "Process has died"))
              (goto-char (point-min))
-             (setq found (when (re-search-forward regexp nil t)
-                           (tramp-match-string-list))))))
+             (setq found (re-search-forward regexp nil t)))))
     (when tramp-debug-buffer
       (append-to-buffer
        (tramp-get-debug-buffer tramp-current-multi-method tramp-current-method
@@ -6399,7 +6367,7 @@
                             timeout))
                (with-timeout (timeout)
                  (while (not found)
-                   (accept-process-output proc 1)
+                   (tramp-accept-process-output proc 1)
 		   (unless (memq (process-status proc) '(run open))
 		     (error "Process has died"))
                    (goto-char (point-max))
@@ -6407,7 +6375,7 @@
                    (setq found (looking-at end-of-output))))))
             (t
              (while (not found)
-               (accept-process-output proc 1)
+               (tramp-accept-process-output proc 1)
 	       (unless (memq (process-status proc) '(run open))
 		 (error "Process has died"))
                (goto-char (point-max))
@@ -6444,18 +6412,6 @@
     ;; Return value is whether end-of-output sentinel was found.
     found))
 
-(defun tramp-match-string-list (&optional string)
-  "Returns list of all match strings.
-That is, (list (match-string 0) (match-string 1) ...), according to the
-number of matches."
-  (let* ((nmatches (/ (length (match-data)) 2))
-         (i (- nmatches 1))
-         (res nil))
-    (while (>= i 0)
-      (setq res (cons (match-string i string) res))
-      (setq i (- i 1)))
-    res))
-
 (defun tramp-send-command-and-check (multi-method method user host command
                                                   &optional subshell)
   "Run COMMAND and check its exit status.
@@ -6556,7 +6512,7 @@
 If `tramp-discard-garbage' is nil, just erase buffer."
   (if (not tramp-discard-garbage)
       (erase-buffer)
-    (while (prog1 (erase-buffer) (accept-process-output p 0.25))
+    (while (prog1 (erase-buffer) (tramp-accept-process-output p 0.25))
       (when tramp-debug-buffer
         (save-excursion
           (set-buffer (tramp-get-debug-buffer multi-method method user host))
@@ -6993,7 +6949,7 @@
       ;; auto-saved file belonging to another original file.  This could
       ;; be a security threat.
       (set-file-modes buffer-auto-save-file-name
-		      (or (file-modes bfn) ?\600)))))
+		      (or (file-modes bfn) #o600)))))
 
 (unless (or (> emacs-major-version 21)
 	    (and (featurep 'xemacs)
@@ -7130,10 +7086,11 @@
   "Specify if query is needed for process when Emacs is exited.
 If the second argument flag is non-nil, Emacs will query the user before
 exiting if process is running."
+ (funcall
   (if (fboundp 'set-process-query-on-exit-flag)
-      (set-process-query-on-exit-flag process flag)
-    (funcall (symbol-function 'process-kill-without-query)
-	     process flag)))
+      (symbol-function 'set-process-query-on-exit-flag)
+    (symbol-function 'process-kill-without-query))
+  process flag))
 
 
 ;; ------------------------------------------------------------
@@ -7213,20 +7170,19 @@
 ;; CCC: This check is now also really awful; we should search all
 ;; of the filename format, not just the prefix.
 (when (string-match "\\[" tramp-prefix-format)
-(defadvice file-expand-wildcards (around tramp-fix activate)
-  (let ((name (ad-get-arg 0)))
-    (if (tramp-tramp-file-p name)
-	;; If it's a Tramp file, dissect it and look if wildcards
-	;; need to be expanded at all.
-	(let ((v (tramp-dissect-file-name name)))
-	  (if (string-match "[[*?]" (tramp-file-name-localname v))
-	      (let ((res ad-do-it))
-		(setq ad-return-value (or res (list name))))
-	    (setq ad-return-value (list name))))
-      ;; If it is not a Tramp file, just run the original function.
-      (let ((res ad-do-it))
-	(setq ad-return-value (or res (list name)))))))
-)
+  (defadvice file-expand-wildcards (around tramp-fix activate)
+    (let ((name (ad-get-arg 0)))
+      (if (tramp-tramp-file-p name)
+	  ;; If it's a Tramp file, dissect it and look if wildcards
+	  ;; need to be expanded at all.
+	  (let ((v (tramp-dissect-file-name name)))
+	    (if (string-match "[[*?]" (tramp-file-name-localname v))
+		(let ((res ad-do-it))
+		  (setq ad-return-value (or res (list name))))
+	      (setq ad-return-value (list name))))
+	;; If it is not a Tramp file, just run the original function.
+	(let ((res ad-do-it))
+	  (setq ad-return-value (or res (list name))))))))
 
 ;; Tramp version is useful in a number of situations.
 
@@ -7246,69 +7202,74 @@
   (interactive)
   (require 'reporter)
   (catch 'dont-send
-    (let ((reporter-prompt-for-summary-p	t))
+    (let ((reporter-prompt-for-summary-p t))
       (reporter-submit-bug-report
        tramp-bug-report-address		; to-address
        (format "tramp (%s)" tramp-version) ; package name and version
-       `(;; Current state
-	 tramp-ls-command
-	 tramp-test-groks-nt
-	 tramp-file-exists-command
-	 tramp-current-multi-method
-	 tramp-current-method
-	 tramp-current-user
-	 tramp-current-host
-
-	 ;; System defaults
-	 tramp-auto-save-directory        ; vars to dump
-	 tramp-default-method
-	 tramp-rsh-end-of-line
-	 tramp-default-password-end-of-line
-	 tramp-remote-path
-	 tramp-login-prompt-regexp
-	 tramp-password-prompt-regexp
-	 tramp-wrong-passwd-regexp
-	 tramp-yesno-prompt-regexp
-	 tramp-yn-prompt-regexp
-	 tramp-terminal-prompt-regexp
-	 tramp-temp-name-prefix
-	 tramp-file-name-structure
-	 tramp-file-name-regexp
-	 tramp-multi-file-name-structure
-	 tramp-multi-file-name-hop-structure
-	 tramp-multi-methods
-	 tramp-multi-connection-function-alist
-	 tramp-methods
-	 tramp-end-of-output
-	 tramp-coding-commands
-	 tramp-actions-before-shell
-	 tramp-actions-copy-out-of-band
-	 tramp-multi-actions
-	 tramp-terminal-type
-	 tramp-shell-prompt-pattern
-	 tramp-chunksize
-	 ,(when (boundp 'tramp-backup-directory-alist)
-	    'tramp-backup-directory-alist)
-	 ,(when (boundp 'tramp-bkup-backup-directory-info)
-	    'tramp-bkup-backup-directory-info)
-
-	 ;; Non-tramp variables of interest
-	 shell-prompt-pattern
-	 backup-by-copying
-	 backup-by-copying-when-linked
-	 backup-by-copying-when-mismatch
-	 ,(when (boundp 'backup-by-copying-when-privileged-mismatch)
-	    'backup-by-copying-when-privileged-mismatch)
-	 ,(when (boundp 'password-cache)
-	    'password-cache)
-	 ,(when (boundp 'password-cache-expiry)
-	    'password-cache-expiry)
-	 ,(when (boundp 'backup-directory-alist)
-	    'backup-directory-alist)
-	 ,(when (boundp 'bkup-backup-directory-info)
-	    'bkup-backup-directory-info)
-	 file-name-handler-alist)
-       nil				; pre-hook
+       (delq nil
+	     `(;; Current state
+	       tramp-ls-command
+	       tramp-test-groks-nt
+	       tramp-file-exists-command
+	       tramp-current-multi-method
+	       tramp-current-method
+	       tramp-current-user
+	       tramp-current-host
+
+	       ;; System defaults
+	       tramp-auto-save-directory        ; vars to dump
+	       tramp-default-method
+	       tramp-rsh-end-of-line
+	       tramp-default-password-end-of-line
+	       tramp-remote-path
+	       tramp-login-prompt-regexp
+	       ;; Mask non-7bit characters
+	       (tramp-password-prompt-regexp . tramp-reporter-dump-variable)
+	       tramp-wrong-passwd-regexp
+	       tramp-yesno-prompt-regexp
+	       tramp-yn-prompt-regexp
+	       tramp-terminal-prompt-regexp
+	       tramp-temp-name-prefix
+	       tramp-file-name-structure
+	       tramp-file-name-regexp
+	       tramp-multi-file-name-structure
+	       tramp-multi-file-name-hop-structure
+	       tramp-multi-methods
+	       tramp-multi-connection-function-alist
+	       tramp-methods
+	       tramp-end-of-output
+	       tramp-coding-commands
+	       tramp-actions-before-shell
+	       tramp-actions-copy-out-of-band
+	       tramp-multi-actions
+	       tramp-terminal-type
+	       ;; Mask non-7bit characters
+	       (tramp-shell-prompt-pattern . tramp-reporter-dump-variable)
+	       tramp-chunksize
+	       ,(when (boundp 'tramp-backup-directory-alist)
+		  'tramp-backup-directory-alist)
+	       ,(when (boundp 'tramp-bkup-backup-directory-info)
+		  'tramp-bkup-backup-directory-info)
+
+	       ;; Non-tramp variables of interest
+	       ;; Mask non-7bit characters
+	       (shell-prompt-pattern . tramp-reporter-dump-variable)
+	       backup-by-copying
+	       backup-by-copying-when-linked
+	       backup-by-copying-when-mismatch
+	       ,(when (boundp 'backup-by-copying-when-privileged-mismatch)
+		  'backup-by-copying-when-privileged-mismatch)
+	       ,(when (boundp 'password-cache)
+		  'password-cache)
+	       ,(when (boundp 'password-cache-expiry)
+		  'password-cache-expiry)
+	       ,(when (boundp 'backup-directory-alist)
+		  'backup-directory-alist)
+	       ,(when (boundp 'bkup-backup-directory-info)
+		  'bkup-backup-directory-info)
+	       file-name-handler-alist))
+
+       'tramp-load-report-modules	; pre-hook
        'tramp-append-tramp-buffers	; post-hook
        "\
 Enter your bug report in this message, including as much detail as you
@@ -7327,8 +7288,43 @@
 --bug report follows this line--
 "))))
 
-(defun tramp-append-tramp-buffers ()
-  "Append Tramp buffers into the bug report."
+(defun tramp-reporter-dump-variable (varsym mailbuf)
+  "Pretty-print the value of the variable in symbol VARSYM.
+Used for non-7bit chars in strings."
+  (let* ((reporter-eval-buffer (symbol-value 'reporter-eval-buffer))
+	 (val (with-current-buffer reporter-eval-buffer
+		(symbol-value varsym))))
+
+    ;; There are characters to be masked.
+    (when (and (boundp 'mm-7bit-chars)
+	       (string-match
+		(concat "[^" (symbol-value 'mm-7bit-chars) "]") val))
+      (with-current-buffer reporter-eval-buffer
+	(set varsym (concat "(base64-decode-string \""
+			    (base64-encode-string val)
+			    "\")"))))
+
+    ;; Dump variable.
+    (funcall (symbol-function 'reporter-dump-variable) varsym mailbuf)
+
+    ;; Remove string quotation.
+    (forward-line -1)
+    (when (looking-at
+	   (concat "\\(^.*\\)" "\""                       ;; \1 "
+		   "\\((base64-decode-string \\)" "\\\\"  ;; \2 \
+		   "\\(\".*\\)" "\\\\"                    ;; \3 \
+		   "\\(\")\\)" "\"$"))                    ;; \4 "
+      (replace-match "\\1\\2\\3\\4")
+      (beginning-of-line)
+      (insert " ;; variable encoded due to non-printable characters\n"))
+    (forward-line 1)
+
+    ;; Reset VARSYM to old value.
+    (with-current-buffer reporter-eval-buffer
+      (set varsym val))))
+
+(defun tramp-load-report-modules ()
+  "Load needed modules for reporting."
 
   ;; We load message.el and mml.el from Gnus.
   (if (featurep 'xemacs)
@@ -7338,9 +7334,12 @@
     (require 'message nil 'noerror)
     (require 'mml nil 'noerror))
   (when (functionp 'message-mode)
-    (funcall 'message-mode))
+    (funcall (symbol-function 'message-mode)))
   (when (functionp 'mml-mode)
-    (funcall 'mml-mode t))
+    (funcall (symbol-function 'mml-mode) t)))
+
+(defun tramp-append-tramp-buffers ()
+  "Append Tramp buffers into the bug report."
 
   (when (and
 	 (eq major-mode 'message-mode)
@@ -7394,10 +7393,10 @@
 	      (goto-char (point-max))
 	      (insert "\n\n")
 	      (dolist (buffer buffer-list)
-		(mml-insert-empty-tag
-		 'part 'type "text/plain" 'encoding "base64"
-		 'disposition "attachment" 'buffer (buffer-name buffer)
-		 'description (buffer-name buffer)))
+		(funcall (symbol-function 'mml-insert-empty-tag)
+			 'part 'type "text/plain" 'encoding "base64"
+			 'disposition "attachment" 'buffer (buffer-name buffer)
+			 'description (buffer-name buffer)))
 	      (set-buffer-modified-p nil))
 
 	  ;; Don't send.  Delete the message buffer.
--- a/lisp/net/trampver.el	Sun Aug 07 12:46:16 2005 +0000
+++ b/lisp/net/trampver.el	Sun Aug 07 15:42:42 2005 +0000
@@ -4,7 +4,7 @@
 
 ;; Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
 
-;; Author: Kai.Grossjohann@CS.Uni-Dortmund.DE 
+;; Author: Kai Gro,A_(Bjohann <kai.grossjohann@gmx.net>
 ;; Keywords: comm, processes
 
 ;; This file is part of GNU Emacs.
@@ -30,7 +30,7 @@
 ;; are auto-frobbed from configure.ac, so you should edit that file and run
 ;; "autoconf && ./configure" to change them.
 
-(defconst tramp-version "2.0.49"
+(defconst tramp-version "2.0.50"
   "This version of Tramp.")
 
 (defconst tramp-bug-report-address "tramp-devel@gnu.org"
--- a/man/ChangeLog	Sun Aug 07 12:46:16 2005 +0000
+++ b/man/ChangeLog	Sun Aug 07 15:42:42 2005 +0000
@@ -1,3 +1,13 @@
+2005-08-07  Michael Albinus  <michael.albinus@gmx.de>
+
+	Sync with Tramp 2.0.50.
+
+	* tramp.texi: Use @option{} consequently for method names.
+	(Inline methods, External transfer methods): Remove references to
+	Cygwin.
+	(Issues with Cygwin ssh): Explain trouble with Cygwin's ssh
+	implementation.
+
 2005-08-06  Eli Zaretskii  <eliz@gnu.org>
 
 	* mule.texi (Coding Systems): Rephrase the paragraph about
--- a/man/tramp.texi	Sun Aug 07 12:46:16 2005 +0000
+++ b/man/tramp.texi	Sun Aug 07 15:42:42 2005 +0000
@@ -218,10 +218,10 @@
 @chapter An overview of @value{tramp}
 @cindex overview
 
-After the installation of @value{tramp} into your @value{emacsname}, you
-will be able to access files on remote machines as though they were
-local.  Access to the remote file system for editing files, version
-control, and @command{dired} are transparently enabled.
+After the installation of @value{tramp} into your @value{emacsname},
+you will be able to access files on remote machines as though they
+were local.  Access to the remote file system for editing files,
+version control, and @code{dired} are transparently enabled.
 
 Your access to the remote machine can be with the @command{rsh},
 @command{rlogin}, @command{telnet} programs or with any similar
@@ -289,9 +289,9 @@
 goes into a buffer.
 
 @item
-The remote host may prompt for a login name (for @command{telnet}).  The
-login name is given in the file name, so @value{tramp} sends the login name and
-a newline.
+The remote host may prompt for a login name (for @command{telnet}).
+The login name is given in the file name, so @value{tramp} sends the
+login name and a newline.
 
 @item
 The remote host may prompt for a password or pass phrase (for
@@ -365,7 +365,6 @@
 Again, @value{tramp} transfers the file contents to the remote host either
 inline or out-of-band.  This is the reverse of what happens when reading
 the file.
-
 @end itemize
 
 I hope this has provided you with a basic overview of what happens
@@ -653,7 +652,6 @@
 @item @option{sshx}
 @cindex method sshx
 @cindex sshx method
-@cindex Cygwin (with sshx method)
 
 As you would expect, this is similar to @option{ssh}, only a little
 different.  Whereas @option{ssh} opens a normal interactive shell on
@@ -674,9 +672,9 @@
 This is also useful for Windows users where @command{ssh}, when
 invoked from an @value{emacsname} buffer, tells them that it is not
 allocating a pseudo tty.  When this happens, the login shell is wont
-to not print any shell prompt, which confuses @value{tramp} mightily.  For
-reasons unknown, some Windows ports for @command{ssh} (maybe the
-Cygwin one) require the doubled @samp{-t} option.
+to not print any shell prompt, which confuses @value{tramp} mightily.
+For reasons unknown, some Windows ports for @command{ssh} require the
+doubled @samp{-t} option.
 
 This supports the @samp{-p} kludge.
 
@@ -817,7 +815,6 @@
 @cindex scpx method
 @cindex scp (with scpx method)
 @cindex ssh (with scpx method)
-@cindex Cygwin (with scpx method)
 
 As you would expect, this is similar to @option{scp}, only a little
 different.  Whereas @option{scp} opens a normal interactive shell on
@@ -832,7 +829,6 @@
 invoked from an @value{emacsname} buffer, tells them that it is not
 allocating a pseudo tty.  When this happens, the login shell is wont
 to not print any shell prompt, which confuses @value{tramp} mightily.
-Maybe this applies to the Cygwin port of SSH.
 
 This method supports the @samp{-p} hack.
 
@@ -1025,7 +1021,7 @@
  '("sshf" tramp-multi-connect-rlogin "ssh %h -l %u -p 4400%n"))
 @end lisp
 
-Now you can use an @code{sshf} hop which connects to port 4400 instead of
+Now you can use an @option{sshf} hop which connects to port 4400 instead of
 the standard port.
 
 
@@ -1074,16 +1070,16 @@
 environment you will use them in and, especially when used over the
 Internet, the security implications of your preferred method.
 
-The @command{rsh} and @command{telnet} methods send your password as
-plain text as you log in to the remote machine, as well as transferring
-the files in such a way that the content can easily be read from other
-machines.
+The @option{rsh} and @option{telnet} methods send your password as
+plain text as you log in to the remote machine, as well as
+transferring the files in such a way that the content can easily be
+read from other machines.
 
 If you need to connect to remote systems that are accessible from the
-Internet, you should give serious thought to using @command{ssh} based
+Internet, you should give serious thought to using @option{ssh} based
 methods to connect. These provide a much higher level of security,
-making it a non-trivial exercise for someone to obtain your password or
-read the content of the files you are editing.
+making it a non-trivial exercise for someone to obtain your password
+or read the content of the files you are editing.
 
 
 @subsection Which method is the right one for me?
@@ -1101,28 +1097,29 @@
 to edit mostly small files.
 
 I guess that these days, most people can access a remote machine by
-using @code{ssh}.  So I suggest that you use the @code{ssh} method.
-So, type @kbd{C-x C-f
+using @command{ssh}.  So I suggest that you use the @option{ssh}
+method.  So, type @kbd{C-x C-f
 @value{prefix}ssh@value{postfixsinglehop}root@@otherhost@value{postfix}/etc/motd
 @key{RET}} to edit the @file{/etc/motd} file on the other host.
 
-If you can't use @code{ssh} to log in to the remote host, then select a
-method that uses a program that works.  For instance, Windows users
-might like the @code{plink} method which uses the PuTTY implementation
-of @code{ssh}.  Or you use Kerberos and thus like @code{krlogin}.
+If you can't use @option{ssh} to log in to the remote host, then
+select a method that uses a program that works.  For instance, Windows
+users might like the @option{plink} method which uses the PuTTY
+implementation of @command{ssh}.  Or you use Kerberos and thus like
+@option{krlogin}.
 
 For the special case of editing files on the local host as another
-user, see the @code{su} or @code{sudo} method.  It offers shortened
-syntax for the @samp{root} account, like
+user, see the @option{su} or @option{sudo} methods.  They offer
+shortened syntax for the @samp{root} account, like
 @file{@value{prefix}su@value{postfixsinglehop}@value{postfix}/etc/motd}.
 
-People who edit large files may want to consider @code{scp} instead of
-@code{ssh}, or @code{pscp} instead of @code{plink}.  These out-of-band
-methods are faster than inline methods for large files.  Note, however,
-that out-of-band methods suffer from some limitations.  Please try
-first whether you really get a noticeable speed advantage from using an
-out-of-band method!  Maybe even for large files, inline methods are
-fast enough.
+People who edit large files may want to consider @option{scp} instead
+of @option{ssh}, or @option{pscp} instead of @option{plink}.  These
+out-of-band methods are faster than inline methods for large files.
+Note, however, that out-of-band methods suffer from some limitations.
+Please try first whether you really get a noticeable speed advantage
+from using an out-of-band method!  Maybe even for large files, inline
+methods are fast enough.
 
 
 @node Customizing Methods
@@ -1365,16 +1362,16 @@
 be inconvenient because you have to invest a lot of effort into shell
 setup before you can begin to use @value{tramp}.
 
-The package, therefore, pursues a combined approach.  It tries to figure
-out some of the more common setups, and only requires you to avoid
-really exotic stuff.  For example, it looks through a list of
+The package, therefore, pursues a combined approach.  It tries to
+figure out some of the more common setups, and only requires you to
+avoid really exotic stuff.  For example, it looks through a list of
 directories to find some programs on the remote host.  And also, it
 knows that it is not obvious how to check whether a file exists, and
-therefore it tries different possibilities.  (On some hosts and shells,
-the command @code{test -e} does the trick, on some hosts the shell
-builtin doesn't work but the program @code{/usr/bin/test -e} or
-@code{/bin/test -e} works.  And on still other hosts, @code{ls -d} is
-the right way to do this.)
+therefore it tries different possibilities.  (On some hosts and
+shells, the command @command{test -e} does the trick, on some hosts
+the shell builtin doesn't work but the program @command{/usr/bin/test
+-e} or @command{/bin/test -e} works.  And on still other hosts,
+@command{ls -d} is the right way to do this.)
 
 Below you find a discussion of a few things that @value{tramp} does not deal
 with, and that you therefore have to set up correctly.
@@ -1409,11 +1406,11 @@
 @code{shell-prompt-pattern}, which is reported to work well in many
 circumstances.
 
-@item @code{tset} and other questions
+@item @command{tset} and other questions
 @cindex Unix command tset
 @cindex tset Unix command
 
-Some people invoke the @code{tset} program from their shell startup
+Some people invoke the @command{tset} program from their shell startup
 scripts which asks the user about the terminal type of the shell.
 Maybe some shells ask other questions when they are started.  @value{tramp}
 does not know how to answer these questions.  There are two approaches
@@ -1443,20 +1440,21 @@
 @item Non-Bourne commands in @file{.profile}
 
 After logging in to the remote host, @value{tramp} issues the command
-@code{exec /bin/sh}.  (Actually, the command is slightly different.)
-When @code{/bin/sh} is executed, it reads some init files, such as
-@file{~/.shrc} or @file{~/.profile}.
+@command{exec /bin/sh}.  (Actually, the command is slightly
+different.)  When @command{/bin/sh} is executed, it reads some init
+files, such as @file{~/.shrc} or @file{~/.profile}.
 
 Now, some people have a login shell which is not @code{/bin/sh} but a
 Bourne-ish shell such as bash or ksh.  Some of these people might put
-their shell setup into the files @code{~/.shrc} or @code{~/.profile}.
+their shell setup into the files @file{~/.shrc} or @file{~/.profile}.
 This way, it is possible for non-Bourne constructs to end up in those
-files.  Then, @code{exec /bin/sh} might cause the Bourne shell to barf
-on those constructs.
-
-As an example, imagine somebody putting @code{export FOO=bar} into the
-file @file{~/.profile}.  The standard Bourne shell does not understand
-this syntax and will emit a syntax error when it reaches this line.
+files.  Then, @command{exec /bin/sh} might cause the Bourne shell to
+barf on those constructs.
+
+As an example, imagine somebody putting @command{export FOO=bar} into
+the file @file{~/.profile}.  The standard Bourne shell does not
+understand this syntax and will emit a syntax error when it reaches
+this line.
 
 Another example is the tilde (@code{~}) character, say when adding
 @file{~/bin} to @code{$PATH}.  Many Bourne shells will not expand this
@@ -1467,8 +1465,8 @@
 
 Well, one possibility is to make sure that everything in @file{~/.shrc}
 and @file{~/.profile} on all remote hosts is Bourne-compatible.  In the
-above example, instead of @code{export FOO=bar}, you might use
-@code{FOO=bar; export FOO} instead.
+above example, instead of @command{export FOO=bar}, you might use
+@command{FOO=bar; export FOO} instead.
 
 The other possibility is to put your non-Bourne shell setup into some
 other files.  For example, bash reads the file @file{~/.bash_profile}
@@ -1476,14 +1474,15 @@
 aficionados just rename their @file{~/.profile} to
 @file{~/.bash_profile} on all remote hosts, and Bob's your uncle.
 
-The @value{tramp} developers would like to circumvent this problem, so if you
-have an idea about it, please tell us.  However, we are afraid it is not
-that simple: before saying @code{exec /bin/sh}, @value{tramp} does not know
-which kind of shell it might be talking to.  It could be a Bourne-ish
-shell like ksh or bash, or it could be a csh derivative like tcsh, or
-it could be zsh, or even rc.  If the shell is Bourne-ish already, then
-it might be prudent to omit the @code{exec /bin/sh} step.  But how to
-find out if the shell is Bourne-ish?
+The @value{tramp} developers would like to circumvent this problem, so
+if you have an idea about it, please tell us.  However, we are afraid
+it is not that simple: before saying @command{exec /bin/sh},
+@value{tramp} does not know which kind of shell it might be talking
+to.  It could be a Bourne-ish shell like ksh or bash, or it could be a
+csh derivative like tcsh, or it could be zsh, or even rc.  If the
+shell is Bourne-ish already, then it might be prudent to omit the
+@command{exec /bin/sh} step.  But how to find out if the shell is
+Bourne-ish?
 
 @end table
 
@@ -1630,38 +1629,44 @@
 
 @cindex method sshx with Cygwin
 @cindex sshx method with Cygwin
-If you use the Cygwin installation of ssh (you have to explicitly select
-it in the installer), then it should work out of the box to just select
-@code{sshx} as the connection method.  You can find information about
-setting up Cygwin in their FAQ at @uref{http://cygwin.com/faq/}.
+The recent Cygwin installation of @command{ssh} works only with a
+Cygwinized @value{emacsname}.  You can check it by typing @kbd{M-x
+eshell}, and starting @kbd{ssh test.machine}.  The problem is evident
+if you see a message like this:
+
+@example
+Pseudo-terminal will not be allocated because stdin is not a terminal.
+@end example
+
+Older @command{ssh} versions of Cygwin are told to cooperate with
+@value{tramp} selecting @option{sshx} as the connection method.  You
+can find information about setting up Cygwin in their FAQ at
+@uref{http://cygwin.com/faq/}.
 
 @cindex method scpx with Cygwin
 @cindex scpx method with Cygwin
-If you wish to use the @code{scpx} connection method, then you might
-have the problem that @value{emacsname} calls @code{scp} with a
+If you wish to use the @option{scpx} connection method, then you might
+have the problem that @value{emacsname} calls @command{scp} with a
 Windows filename such as @code{c:/foo}.  The Cygwin version of
-@code{scp} does not know about Windows filenames and interprets this
+@command{scp} does not know about Windows filenames and interprets this
 as a remote filename on the host @code{c}.
 
-One possible workaround is to write a wrapper script for @code{scp}
+One possible workaround is to write a wrapper script for @option{scp}
 which converts the Windows filename to a Cygwinized filename.
 
-I guess that another workaround is to run @value{emacsname} under
-Cygwin, or to run a Cygwinized @value{emacsname}.
-
 @cindex Cygwin and ssh-agent
 @cindex SSH_AUTH_SOCK and @value{emacsname} on Windows
-If you want to use either @code{ssh} based method on Windows, then you
-might encounter problems with @code{ssh-agent}.  Using this program,
-you can avoid typing the pass-phrase every time you log in.  However,
-if you start @value{emacsname} from a desktop shortcut, then the
-environment variable @code{SSH_AUTH_SOCK} is not set and so
-@value{emacsname} and thus @value{tramp} and thus @code{ssh} and
-@code{scp} started from @value{tramp} cannot communicate with
-@code{ssh-agent}.  It works better to start @value{emacsname} from
+If you want to use either @option{ssh} based method on Windows, then
+you might encounter problems with @command{ssh-agent}.  Using this
+program, you can avoid typing the pass-phrase every time you log in.
+However, if you start @value{emacsname} from a desktop shortcut, then
+the environment variable @code{SSH_AUTH_SOCK} is not set and so
+@value{emacsname} and thus @value{tramp} and thus @command{ssh} and
+@command{scp} started from @value{tramp} cannot communicate with
+@command{ssh-agent}.  It works better to start @value{emacsname} from
 the shell.
 
-If anyone knows how to start @code{ssh-agent} under Windows in such a
+If anyone knows how to start @command{ssh-agent} under Windows in such a
 way that desktop shortcuts can profit, please holler.  I don't really
 know anything at all about Windows@dots{}
 
@@ -2108,10 +2113,10 @@
 There's this @file{~/.sh_history} file on the remote host which keeps
 growing and growing.  What's that?
 
-Sometimes, @value{tramp} starts @code{ksh} on the remote host for tilde
-expansion.  Maybe @code{ksh} saves the history by default.  @value{tramp}
-tries to turn off saving the history, but maybe you have to help.  For
-example, you could put this in your @file{.kshrc}:
+Sometimes, @value{tramp} starts @command{ksh} on the remote host for
+tilde expansion.  Maybe @command{ksh} saves the history by default.
+@value{tramp} tries to turn off saving the history, but maybe you have
+to help.  For example, you could put this in your @file{.kshrc}:
 
 @example
 if [ -f $HOME/.sh_history ] ; then
@@ -2316,18 +2321,18 @@
 @itemize @bullet
 @item The uuencode method does not always work.
 
-Due to the design of @value{tramp}, the encoding and decoding programs need to
-read from stdin and write to stdout.  On some systems, @code{uudecode -o
--} will read stdin and write the decoded file to stdout, on other
-systems @code{uudecode -p} does the same thing.  But some systems have
-uudecode implementations which cannot do this at all---it is not
-possible to call these uudecode implementations with suitable parameters
-so that they write to stdout.
+Due to the design of @value{tramp}, the encoding and decoding programs
+need to read from stdin and write to stdout.  On some systems,
+@command{uudecode -o -} will read stdin and write the decoded file to
+stdout, on other systems @command{uudecode -p} does the same thing.
+But some systems have uudecode implementations which cannot do this at
+all---it is not possible to call these uudecode implementations with
+suitable parameters so that they write to stdout.
 
 Of course, this could be circumvented: the @code{begin foo 644} line
 could be rewritten to put in some temporary file name, then
-@code{uudecode} could be called, then the temp file could be printed and
-deleted.
+@command{uudecode} could be called, then the temp file could be
+printed and deleted.
 
 But I have decided that this is too fragile to reliably work, so on some
 systems you'll have to do without the uuencode methods.
@@ -2368,13 +2373,12 @@
 
 In case of unified filenames, all @value{emacsname} download sites
 are added to @code{tramp-default-method-alist} with default method
-@code{ftp} @xref{Default Method}.  These settings shouldn't be touched
+@option{ftp} @xref{Default Method}.  These settings shouldn't be touched
 for proper working of the @value{emacsname} package system.
 
 The syntax for unified filenames is described in the @value{tramp} manual
 for @value{emacsothername}.
 @end ifset
-
 @end itemize
 
 @node Concept Index
--- a/man/trampver.texi	Sun Aug 07 12:46:16 2005 +0000
+++ b/man/trampver.texi	Sun Aug 07 15:42:42 2005 +0000
@@ -4,7 +4,7 @@
 @c In the Tramp CVS, the version number is auto-frobbed from
 @c configure.ac, so you should edit that file and run
 @c "autoconf && ./configure" to change the version number.
-@set trampver 2.0.49
+@set trampver 2.0.50
 
 @c Other flags from configuration
 @set prefix /usr/local