Mercurial > emacs

changeset 7329:1b783ac3851d

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Put in a separator for where to start cpp procssing. Move all autoconf substitutions above that point. Above that point, use Make-style comments. This goes with changes in ../configure.in.
author Richard M. Stallman <rms@gnu.org>
date Thu, 05 May 1994 04:11:17 +0000
parents 29e2aa20e7b8
children e66a72c5f8d3
files lib-src/Makefile.in
diffstat 1 files changed, 102 insertions(+), 97 deletions(-) [+]
line wrap: on
line diff
--- a/lib-src/Makefile.in	Thu May 05 04:08:19 1994 +0000
+++ b/lib-src/Makefile.in	Thu May 05 04:11:17 1994 +0000
@@ -1,21 +1,108 @@
-/* Makefile for lib-src subdirectory in GNU Emacs.
-   Copyright (C) 1985, 1987, 1988, 1993, 1994 Free Software Foundation, Inc.
+# Makefile for lib-src subdirectory in GNU Emacs.
+# Copyright (C) 1985, 1987, 1988, 1993, 1994 Free Software Foundation, Inc.
+
+# This file is part of GNU Emacs.
+
+# GNU Emacs is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# GNU Emacs is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GNU Emacs; see the file COPYING.  If not, write to
+# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+# Avoid trouble on systems where the `SHELL' variable might be
+# inherited from the environment.
+SHELL = /bin/sh
+
+# ==================== Things `configure' will edit ====================
 
-This file is part of GNU Emacs.
+CC=@CC@
+CFLAGS=@CFLAGS@
+ALLOCA=@ALLOCA@
+YACC=@YACC@
+version=@version@
+configuration=@configuration@
+
+# ==================== Where To Install Things ====================
+
+# The default location for installation.  Everything is placed in
+# subdirectories of this directory.  The default values for many of
+# the variables below are expressed in terms of this one, so you may
+# not need to change them.  This is set with the --prefix option to
+# `../configure'.
+prefix=@prefix@
+
+# Like `prefix', but used for architecture-specific files.  This is
+# set with the --exec-prefix option to `../configure'.
+exec_prefix=@exec_prefix@
+
+# Where to install Emacs and other binaries that people will want to
+# run directly (like etags).  This is set with the --bindir option
+# to `../configure'.
+bindir=@bindir@
 
-GNU Emacs is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+# Where to install and expect executable files to be run by Emacs
+# rather than directly by users, and other architecture-dependent
+# data.  ${archlibdir} is usually below this.  This is set with the
+# --libdir option to `../configure'.
+libdir=@libdir@
+
+# Where to find the source code.  This is set by the configure
+# script's `--srcdir' option.  However, the value of ${srcdir} in
+# this makefile is not identical to what was specified with --srcdir,
+# since the variable here has `/lib-src' added at the end.
+srcdir=@srcdir@
+VPATH=@srcdir@
+
+# ==================== Emacs-specific directories ====================
+
+# These variables hold the values Emacs will actually use.  They are
+# based on the values of the standard Make variables above.
+
+# Where to put executables to be run by Emacs rather than the user.
+# This path usually includes the Emacs version and configuration name,
+# so that multiple configurations for multiple versions of Emacs may
+# be installed at once.  This can be set with the --archlibdir option
+# to `../configure'.
+archlibdir=@archlibdir@
+
+# ==================== Utility Programs for the Build =================
 
-GNU Emacs is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
+# ../configure figures out the correct values for these.
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+# ========================== Lists of Files ===========================
+
+# Things that a user might actually run,
+# which should be installed in bindir.
+INSTALLABLES = etags ctags emacsclient b2m
+INSTALLABLE_SCRIPTS = rcs-checkin
 
-You should have received a copy of the GNU General Public License
-along with GNU Emacs; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+# Things that Emacs runs internally, or during the build process,
+#  which should not be installed in bindir.
+UTILITIES= test-distrib make-path wakeup profile make-docfile digest-doc \
+	sorted-doc movemail cvtmail fakemail yow emacsserver hexl timer
+
+# Like UTILITIES, but they're not system-dependent, and should not be
+#  deleted by the distclean target.
+SCRIPTS= rcs2log vcdiff
+
+EXECUTABLES= ${UTILITIES} ${INSTALLABLES} ${SCRIPTS} ${INSTALLABLE_SCRIPTS}
+
+SOURCES = COPYING ChangeLog Makefile.in README aixcc.lex emacs.csh \
+	makedoc.com *.[chy] rcs2log vcdiff
+
+# ========================== start of cpp stuff =======================
+/* From here on, comments must be done in C syntax.  */
 
 #define NO_SHORTNAMES
 #define THIS_IS_YMAKEFILE
@@ -53,90 +140,7 @@
 #define BLESSMAIL
 #endif
 
-/* Avoid trouble on systems where the `SHELL' variable might be
-   inherited from the environment.  */
-SHELL = /bin/sh
-
-/* ==================== Things `configure' will edit ==================== */
-
-CC=@CC@
-CFLAGS=@CFLAGS@
-ALLOCA=@ALLOCA@
 LOADLIBES=LIBS_SYSTEM LIBS_MACHINE
-YACC=@YACC@
-version=@version@
-configuration=@configuration@
-
-/* ==================== Where To Install Things ==================== */
-
-/* The default location for installation.  Everything is placed in
-   subdirectories of this directory.  The default values for many of
-   the variables below are expressed in terms of this one, so you may
-   not need to change them.  This is set with the --prefix option to
-   `../configure'.  */
-prefix=@prefix@
-
-/* Like `prefix', but used for architecture-specific files.  This is
-   set with the --exec-prefix option to `../configure'.  */
-exec_prefix=@exec_prefix@
-
-/* Where to install Emacs and other binaries that people will want to
-   run directly (like etags).  This is set with the --bindir option
-   to `../configure'.  */
-bindir=@bindir@
-
-/* Where to install and expect executable files to be run by Emacs
-   rather than directly by users, and other architecture-dependent
-   data.  ${archlibdir} is usually below this.  This is set with the
-   --libdir option to `../configure'.  */
-libdir=@libdir@
-
-/* Where to find the source code.  This is set by the configure
-   script's `--srcdir' option.  However, the value of ${srcdir} in
-   this makefile is not identical to what was specified with --srcdir,
-   since the variable here has `/lib-src' added at the end.  */
-srcdir=@srcdir@
-VPATH=@srcdir@
-
-/* ==================== Emacs-specific directories ==================== */
-
-/* These variables hold the values Emacs will actually use.  They are
-   based on the values of the standard Make variables above.  */
-
-/* Where to put executables to be run by Emacs rather than the user.
-   This path usually includes the Emacs version and configuration name,
-   so that multiple configurations for multiple versions of Emacs may
-   be installed at once.  This can be set with the --archlibdir option
-   to `../configure'.  */
-archlibdir=@archlibdir@
-
-/* ==================== Utility Programs for the Build ================= */
-
-/* ../configure figures out the correct values for these.  */
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-
-/* ============================= Targets ============================== */
-
-/* Things that a user might actually run,
-   which should be installed in bindir.  */
-INSTALLABLES = etags ctags emacsclient b2m
-INSTALLABLE_SCRIPTS = rcs-checkin
-
-/* Things that Emacs runs internally, or during the build process,
-   which should not be installed in bindir.  */
-UTILITIES= test-distrib make-path wakeup profile make-docfile digest-doc \
-	sorted-doc movemail cvtmail fakemail yow emacsserver hexl timer
-
-/* Like UTILITIES, but they're not system-dependent, and should not be
-   deleted by the distclean target.  */
-SCRIPTS= rcs2log vcdiff
-
-EXECUTABLES= ${UTILITIES} ${INSTALLABLES} ${SCRIPTS} ${INSTALLABLE_SCRIPTS}
-
-SOURCES = COPYING ChangeLog Makefile.in README aixcc.lex emacs.csh \
-	makedoc.com *.[chy] rcs2log vcdiff
 
 /* We need to #define emacs to get the right versions of some files.
    Some other files - those shared with other GNU utilities - need
@@ -173,6 +177,7 @@
 	  echo Assuming $$dir is really the mail spool directory, you should; \
 	  echo run  ./blessmail ${archlibdir}/movemail; \
 	  echo as root, to give  movemail  appropriate permissions.; \
+	  echo Do that after running  make install.; \
 	fi
 #endif