Mercurial > emacs

--- a/lisp/ChangeLog	Wed Sep 15 09:00:10 2004 +0000
+++ b/lisp/ChangeLog	Fri Sep 17 14:31:05 2004 +0000
@@ -1,3 +1,8 @@
+2004-09-15  Thien-Thi Nguyen  <ttn@gnu.org>
+
+	* vc.el (annotate-time): Document point handling.
+	(vc-annotate-display-autoscale): Doc fix.
+
 2004-09-15  Miles Bader  <miles@gnu.org>

 	* generic.el (generic-make-keywords-list): Use symbol rather than
--- a/lisp/calc/calc-embed.el	Wed Sep 15 09:00:10 2004 +0000
+++ b/lisp/calc/calc-embed.el	Fri Sep 17 14:31:05 2004 +0000
@@ -557,7 +557,7 @@
 	       (not (eq (cdr found) 'default)))
 	  (progn
 	    (if (eq (setq value (cdr (car v))) 'default)
-		(setq value (cdr (assq (car (car v)) calc-mode-var-list))))
+		(setq value (list (nth 1 (assq (car (car v)) calc-mode-var-list)))))
 	    (equal (symbol-value (car (car v))) value))
 	  (progn
 	    (setq changed t)
--- a/lisp/calc/calc.el	Wed Sep 15 09:00:10 2004 +0000
+++ b/lisp/calc/calc.el	Fri Sep 17 14:31:05 2004 +0000
@@ -3,8 +3,7 @@
 ;; Copyright (C) 1990, 1991, 1992, 1993, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.

 ;; Author: David Gillespie <daveg@synaptics.com>
-;; Maintainers: D. Goel <deego@gnufans.org>
-;;              Colin Walters <walters@debian.org>
+;; Maintainer: Jay Belanger <belanger@truman.edu>
 ;; Keywords: convenience, extensions
 ;; Version: 2.02g

@@ -237,7 +236,7 @@
 (defvar calc-gnuplot-print-command "lp %s"
   "*Name of command for printing GNUPLOT output; %s = file name to print.")

-(defvar calc-bug-address "deego@gnufans.org"
+(defvar calc-bug-address "belanger@truman.edu"
   "Address of the author of Calc, for use by `report-calc-bug'.")

 (defvar calc-scan-for-dels t
@@ -257,60 +256,145 @@
   "Index into `calc-stack' of \"top\" of stack.
 This is 1 unless `calc-truncate-stack' has been used.")

-(defvar calc-always-load-extensions nil
-  "If non-nil, load the calc-ext module automatically when calc is loaded.")
-
-(defvar calc-line-numbering t
-  "If non-nil, display line numbers in Calculator stack.")
-
-(defvar calc-line-breaking t
-  "If non-nil, break long values across multiple lines in Calculator stack.")
-
-(defvar calc-display-just nil
-  "If nil, stack display is left-justified.
+(defvar calc-display-sci-high 0
+  "Floating-point numbers with this positive exponent or higher above the
+current precision are displayed in scientific notation in calc-mode.")
+
+(defvar calc-display-sci-low -3
+  "Floating-point numbers with this negative exponent or lower are displayed
+scientific notation in calc-mode.")
+
+(defvar calc-other-modes nil
+  "List of used-defined strings to append to Calculator mode line.")
+
+(defvar calc-Y-help-msgs nil
+  "List of strings for Y prefix help.")
+
+(defvar calc-loaded-settings-file nil
+  "t if `calc-settings-file' has been loaded yet.")
+
+(defvar calc-always-load-extensions)
+(defvar calc-line-numbering)
+(defvar calc-line-breaking)
+(defvar calc-display-just)
+(defvar calc-display-origin)
+(defvar calc-number-radix)
+(defvar calc-leading-zeros)
+(defvar calc-group-digits)
+(defvar calc-group-char)
+(defvar calc-point-char)
+(defvar calc-frac-format)
+(defvar calc-prefer-frac)
+(defvar calc-hms-format)
+(defvar calc-date-format)
+(defvar calc-float-format)
+(defvar calc-full-float-format)
+(defvar calc-complex-format)
+(defvar calc-complex-mode)
+(defvar calc-infinite-mode)
+(defvar calc-display-strings)
+(defvar calc-matrix-just)
+(defvar calc-break-vectors)
+(defvar calc-full-vectors)
+(defvar calc-full-trail-vectors)
+(defvar calc-vector-commas)
+(defvar calc-vector-brackets)
+(defvar calc-matrix-brackets)
+(defvar calc-language)
+(defvar calc-language-option)
+(defvar calc-left-label)
+(defvar calc-right-label)
+(defvar calc-word-size)
+(defvar calc-previous-modulo)
+(defvar calc-simplify-mode)
+(defvar calc-auto-recompute)
+(defvar calc-display-raw)
+(defvar calc-internal-prec)
+(defvar calc-angle-mode)
+(defvar calc-algebraic-mode)
+(defvar calc-incomplete-algebraic-mode)
+(defvar calc-symbolic-mode)
+(defvar calc-matrix-mode)
+(defvar calc-shift-prefix)
+(defvar calc-window-height)
+(defvar calc-display-trail)
+(defvar calc-show-selections)
+(defvar calc-use-selections)
+(defvar calc-assoc-selections)
+(defvar calc-display-working-message)
+(defvar calc-auto-why)
+(defvar calc-timing)
+(defvar calc-mode-save-mode)
+(defvar calc-standard-date-formats)
+(defvar calc-autorange-units)
+(defvar calc-was-keypad-mode)
+(defvar calc-full-mode)
+(defvar calc-user-parse-tables)
+(defvar calc-gnuplot-default-device)
+(defvar calc-gnuplot-default-output)
+(defvar calc-gnuplot-print-device)
+(defvar calc-gnuplot-print-output)
+(defvar calc-gnuplot-geometry)
+(defvar calc-graph-default-resolution)
+(defvar calc-graph-default-resolution-3d)
+(defvar calc-invocation-macro)
+(defvar calc-show-banner)
+
+(defconst calc-mode-var-list '(
+  (calc-always-load-extensions nil
+   "If non-nil, load the calc-ext module automatically when calc is loaded.")
+
+  (calc-line-numbering t
+   "If non-nil, display line numbers in Calculator stack.")
+
+  (calc-line-breaking t
+   "If non-nil, break long values across multiple lines in Calculator stack.")
+
+  (calc-display-just nil
+   "If nil, stack display is left-justified.
 If `right', stack display is right-justified.
 If `center', stack display is centered.")

-(defvar calc-display-origin nil
-  "Horizontal origin of displayed stack entries.
+  (calc-display-origin nil
+   "Horizontal origin of displayed stack entries.
 In left-justified mode, this is effectively indentation.  (Default 0).
 In right-justified mode, this is effectively window width.
 In centered mode, center of stack entry is placed here.")

-(defvar calc-number-radix 10
-  "Radix for entry and display of numbers in calc-mode, 2-36.")
-
-(defvar calc-leading-zeros nil
-  "If non-nil, leading zeros are provided to pad integers to calc-word-size.")
-
-(defvar calc-group-digits nil
-  "If non-nil, group digits in large displayed integers by inserting spaces.
+  (calc-number-radix 10
+   "Radix for entry and display of numbers in calc-mode, 2-36.")
+
+  (calc-leading-zeros nil
+   "If non-nil, leading zeros are provided to pad integers to calc-word-size.")
+
+  (calc-group-digits nil
+   "If non-nil, group digits in large displayed integers by inserting spaces.
 If an integer, group that many digits at a time.
 If t, use 4 for binary and hex, 3 otherwise.")

-(defvar calc-group-char ","
-  "The character (in the form of a string) to be used for grouping digits.
+  (calc-group-char ","
+   "The character (in the form of a string) to be used for grouping digits.
 This is used only when calc-group-digits mode is on.")

-(defvar calc-point-char "."
-  "The character (in the form of a string) to be used as a decimal point.")
-
-(defvar calc-frac-format '(":" nil)
-  "Format of displayed fractions; a string of one or two of \":\" or \"/\".")
-
-(defvar calc-prefer-frac nil
-  "If non-nil, prefer fractional over floating-point results.")
-
-(defvar calc-hms-format "%s@ %s' %s\""
-  "Format of displayed hours-minutes-seconds angles, a format string.
+  (calc-point-char "."
+   "The character (in the form of a string) to be used as a decimal point.")
+
+  (calc-frac-format (":" nil)
+   "Format of displayed fractions; a string of one or two of \":\" or \"/\".")
+
+  (calc-prefer-frac nil
+   "If non-nil, prefer fractional over floating-point results.")
+
+  (calc-hms-format "%s@ %s' %s\""
+   "Format of displayed hours-minutes-seconds angles, a format string.
 String must contain three %s marks for hours, minutes, seconds respectively.")

-(defvar calc-date-format '((H ":" mm C SS pp " ")
-			   Www " " Mmm " " D ", " YYYY)
-  "Format of displayed date forms.")
-
-(defvar calc-float-format '(float 0)
-  "Format to use for display of floating-point numbers in calc-mode.
+  (calc-date-format ((H ":" mm C SS pp " ")
+                     Www " " Mmm " " D ", " YYYY)
+   "Format of displayed date forms.")
+
+  (calc-float-format (float 0)
+   "Format to use for display of floating-point numbers in calc-mode.
 Must be a list of one of the following forms:
  (float 0)      Floating point format, display full precision.
  (float N)      N > 0: Floating point format, at most N significant figures.
@@ -323,54 +407,54 @@
  (eng N)        N > 0: Engineering notation, N significant figures.
  (eng -N)       -N < 0: Engineering notation, calc-internal-prec - N figs.")

-(defvar calc-full-float-format '(float 0)
-  "Format to use when full precision must be displayed.")
-
-(defvar calc-complex-format nil
-  "Format to use for display of complex numbers in calc-mode.  Must be one of:
+  (calc-full-float-format (float 0)
+   "Format to use when full precision must be displayed.")
+
+  (calc-complex-format nil
+   "Format to use for display of complex numbers in calc-mode.  Must be one of:
   nil            Use (x, y) form.
   i              Use x + yi form.
   j              Use x + yj form.")

-(defvar calc-complex-mode 'cplx
-  "Preferred form, either `cplx' or `polar', for complex numbers.")
-
-(defvar calc-infinite-mode nil
-  "If nil, 1 / 0 is left unsimplified.
+  (calc-complex-mode cplx
+   "Preferred form, either `cplx' or `polar', for complex numbers.")
+
+  (calc-infinite-mode nil
+   "If nil, 1 / 0 is left unsimplified.
 If 0, 1 / 0 is changed to inf (zeros are considered positive).
 Otherwise, 1 / 0 is changed to uinf (undirected infinity).")

-(defvar calc-display-strings nil
-  "If non-nil, display vectors of byte-sized integers as strings.")
-
-(defvar calc-matrix-just 'center
-  "If nil, vector elements are left-justified.
+  (calc-display-strings nil
+   "If non-nil, display vectors of byte-sized integers as strings.")
+
+  (calc-matrix-just 'center
+   "If nil, vector elements are left-justified.
 If `right', vector elements are right-justified.
 If `center', vector elements are centered.")

-(defvar calc-break-vectors nil
-  "If non-nil, display vectors one element per line.")
-
-(defvar calc-full-vectors t
-  "If non-nil, display long vectors in full.  If nil, use abbreviated form.")
-
-(defvar calc-full-trail-vectors t
-  "If non-nil, display long vectors in full in the trail.")
-
-(defvar calc-vector-commas ","
-  "If non-nil, separate elements of displayed vectors with this string.")
-
-(defvar calc-vector-brackets "[]"
-  "If non-nil, surround displayed vectors with these characters.")
-
-(defvar calc-matrix-brackets '(R O)
-  "A list of code-letter symbols that control \"big\" matrix display.
+  (calc-break-vectors nil
+   "If non-nil, display vectors one element per line.")
+
+  (calc-full-vectors t
+   "If non-nil, display long vectors in full.  If nil, use abbreviated form.")
+
+  (calc-full-trail-vectors t
+   "If non-nil, display long vectors in full in the trail.")
+
+  (calc-vector-commas ","
+   "If non-nil, separate elements of displayed vectors with this string.")
+
+  (calc-vector-brackets "[]"
+   "If non-nil, surround displayed vectors with these characters.")
+
+  (calc-matrix-brackets '(R O)
+   "A list of code-letter symbols that control \"big\" matrix display.
 If `R' is present, display inner brackets for matrices.
 If `O' is present, display outer brackets for matrices (above/below).
 If `C' is present, display outer brackets for matrices (centered).")

-(defvar calc-language nil
-  "Language or format for entry and display of stack values.  Must be one of:
+  (calc-language nil
+   "Language or format for entry and display of stack values.  Must be one of:
   nil		Use standard Calc notation.
   flat		Use standard Calc notation, one-line format.
   big		Display formulas in 2-d notation (enter w/std notation).
@@ -383,38 +467,23 @@
   math		Use Mathematica(tm) notation.
   maple		Use Maple notation.")

-(defvar calc-language-option nil
-  "Numeric prefix argument for the command that set `calc-language'.")
-
-(defvar calc-function-open "("
-  "Open-parenthesis string for function call notation.")
-
-(defvar calc-function-close ")"
-  "Close-parenthesis string for function call notation.")
-
-(defvar calc-language-output-filter nil
-  "Function through which to pass strings after formatting.")
-
-(defvar calc-language-input-filter nil
-  "Function through which to pass strings before parsing.")
-
-(defvar calc-radix-formatter nil
-  "Formatting function used for non-decimal numbers.")
-
-(defvar calc-left-label ""
-  "Label to display at left of formula.")
-
-(defvar calc-right-label ""
-  "Label to display at right of formula.")
-
-(defvar calc-word-size 32
-  "Minimum number of bits per word, if any, for binary operations in calc-mode.")
-
-(defvar calc-previous-modulo nil
-  "Most recently used value of M in a modulo form.")
-
-(defvar calc-simplify-mode nil
-  "Type of simplification applied to results.
+  (calc-language-option nil
+   "Numeric prefix argument for the command that set `calc-language'.")
+
+  (calc-left-label ""
+   "Label to display at left of formula.")
+
+  (calc-right-label ""
+   "Label to display at right of formula.")
+
+  (calc-word-size 32
+   "Minimum number of bits per word, if any, for binary operations in calc-mode.")
+
+  (calc-previous-modulo nil
+   "Most recently used value of M in a modulo form.")
+
+  (calc-simplify-mode nil
+   "Type of simplification applied to results.
 If `none', results are not simplified when pushed on the stack.
 If `num', functions are simplified only when args are constant.
 If nil, only fast simplifications are applied.
@@ -423,119 +492,112 @@
 If `ext', `math-simplify-extended' is applied.
 If `units', `math-simplify-units' is applied.")

-(defvar calc-auto-recompute t
-  "If non-nil, recompute evalto's automatically when necessary.")
-
-(defvar calc-display-raw nil
-  "If non-nil, display shows unformatted Lisp exprs.  (For debugging)")
-
-(defvar calc-internal-prec 12
-  "Number of digits of internal precision for calc-mode calculations.")
-
-(defvar calc-inverse-flag nil
-  "If non-nil, next operation is Inverse.")
-
-(defvar calc-hyperbolic-flag nil
-  "If non-nil, next operation is Hyperbolic.")
-
-(defvar calc-keep-args-flag nil
-  "If non-nil, next operation should not remove its arguments from stack.")
-
-(defvar calc-angle-mode 'deg
-  "If deg, angles are in degrees; if rad, angles are in radians.
+  (calc-auto-recompute t
+   "If non-nil, recompute evalto's automatically when necessary.")
+
+  (calc-display-raw nil
+   "If non-nil, display shows unformatted Lisp exprs.  (For debugging)")
+
+  (calc-internal-prec 12
+   "Number of digits of internal precision for calc-mode calculations.")
+
+  (calc-angle-mode deg
+   "If deg, angles are in degrees; if rad, angles are in radians.
 If hms, angles are in degrees-minutes-seconds.")

-(defvar calc-algebraic-mode nil
-  "If non-nil, numeric entry accepts whole algebraic expressions.
+  (calc-algebraic-mode nil
+   "If non-nil, numeric entry accepts whole algebraic expressions.
 If nil, algebraic expressions must be preceded by \"'\".")

-(defvar calc-incomplete-algebraic-mode nil
-  "Like calc-algebraic-mode except only affects ( and [ keys.")
-
-(defvar calc-symbolic-mode nil
-  "If non-nil, inexact numeric computations like sqrt(2) are postponed.
+  (calc-incomplete-algebraic-mode nil
+   "Like calc-algebraic-mode except only affects ( and [ keys.")
+
+  (calc-symbolic-mode nil
+   "If non-nil, inexact numeric computations like sqrt(2) are postponed.
 If nil, computations on numbers always yield numbers where possible.")

-(defvar calc-matrix-mode nil
-  "If `matrix', variables are assumed to be matrix-valued.
+  (calc-matrix-mode nil
+   "If `matrix', variables are assumed to be matrix-valued.
 If a number, variables are assumed to be NxN matrices.
 If `scalar', variables are assumed to be scalar-valued.
 If nil, symbolic math routines make no assumptions about variables.")

-(defvar calc-shift-prefix nil
-  "If non-nil, shifted letter keys are prefix keys rather than normal meanings.")
-
-(defvar calc-window-height 7
-  "Initial height of Calculator window.")
-
-(defvar calc-display-trail t
-  "If non-nil, M-x calc creates a window to display Calculator trail.")
-
-(defvar calc-show-selections t
-  "If non-nil, selected sub-formulas are shown by obscuring rest of formula.
+  (calc-shift-prefix nil
+   "If non-nil, shifted letter keys are prefix keys rather than normal meanings.")
+
+  (calc-window-height 7
+   "Initial height of Calculator window.")
+
+  (calc-display-trail t
+   "If non-nil, M-x calc creates a window to display Calculator trail.")
+
+  (calc-show-selections t
+   "If non-nil, selected sub-formulas are shown by obscuring rest of formula.
 If nil, selected sub-formulas are highlighted by obscuring the sub-formulas.")

-(defvar calc-use-selections t
-  "If non-nil, commands operate only on selected portions of formulas.
+  (calc-use-selections t
+   "If non-nil, commands operate only on selected portions of formulas.
 If nil, selections displayed but ignored.")

-(defvar calc-assoc-selections t
-  "If non-nil, selection hides deep structure of associative formulas.")
-
-(defvar calc-display-working-message 'lots
-  "If non-nil, display \"Working...\" for potentially slow Calculator commands.")
-
-(defvar calc-auto-why 'maybe
-  "If non-nil, automatically execute a \"why\" command to explain odd results.")
-
-(defvar calc-timing nil
-  "If non-nil, display timing information on each slow command.")
-
-(defvar calc-display-sci-high 0
-  "Floating-point numbers with this positive exponent or higher above the
-current precision are displayed in scientific notation in calc-mode.")
-
-(defvar calc-display-sci-low -3
-  "Floating-point numbers with this negative exponent or lower are displayed
-scientific notation in calc-mode.")
-
-
-(defvar calc-other-modes nil
-  "List of used-defined strings to append to Calculator mode line.")
-
-(defvar calc-Y-help-msgs nil
-  "List of strings for Y prefix help.")
-
-(defvar calc-loaded-settings-file nil
-  "t if `calc-settings-file' has been loaded yet.")
-
-
-
-(defvar calc-mode-save-mode 'local)
-(defvar calc-standard-date-formats
-  '("N"
-    "<H:mm:SSpp >Www Mmm D, YYYY"
-    "D Mmm YYYY<, h:mm:SS>"
-    "Www Mmm BD< hh:mm:ss> YYYY"
-    "M/D/Y< H:mm:SSpp>"
-    "D.M.Y< h:mm:SS>"
-    "M-D-Y< H:mm:SSpp>"
-    "D-M-Y< h:mm:SS>"
-    "j<, h:mm:SS>"
-    "YYddd< hh:mm:ss>"))
-(defvar calc-autorange-units nil)
-(defvar calc-was-keypad-mode nil)
-(defvar calc-full-mode nil)
-(defvar calc-user-parse-tables nil)
-(defvar calc-gnuplot-default-device "default")
-(defvar calc-gnuplot-default-output "STDOUT")
-(defvar calc-gnuplot-print-device "postscript")
-(defvar calc-gnuplot-print-output "auto")
-(defvar calc-gnuplot-geometry nil)
-(defvar calc-graph-default-resolution 15)
-(defvar calc-graph-default-resolution-3d 5)
-(defvar calc-invocation-macro nil)
-(defvar calc-show-banner t)
+  (calc-assoc-selections t
+   "If non-nil, selection hides deep structure of associative formulas.")
+
+  (calc-display-working-message 'lots
+   "If non-nil, display \"Working...\" for potentially slow Calculator commands.")
+
+  (calc-auto-why 'maybe
+   "If non-nil, automatically execute a \"why\" command to explain odd results.")
+
+  (calc-timing nil
+   "If non-nil, display timing information on each slow command.")
+
+  (calc-mode-save-mode local)
+
+  (calc-standard-date-formats
+   '("N"
+     "<H:mm:SSpp >Www Mmm D, YYYY"
+     "D Mmm YYYY<, h:mm:SS>"
+     "Www Mmm BD< hh:mm:ss> YYYY"
+     "M/D/Y< H:mm:SSpp>"
+     "D.M.Y< h:mm:SS>"
+     "M-D-Y< H:mm:SSpp>"
+     "D-M-Y< h:mm:SS>"
+     "j<, h:mm:SS>"
+     "YYddd< hh:mm:ss>"))
+
+  (calc-autorange-units nil)
+
+  (calc-was-keypad-mode nil)
+
+  (calc-full-mode nil)
+
+  (calc-user-parse-tables nil)
+
+  (calc-gnuplot-default-device "default")
+
+  (calc-gnuplot-default-output "STDOUT")
+
+  (calc-gnuplot-print-device "postscript")
+
+  (calc-gnuplot-print-output "auto")
+
+  (calc-gnuplot-geometry nil)
+
+  (calc-graph-default-resolution 15)
+
+  (calc-graph-default-resolution-3d 5)
+
+  (calc-invocation-macro nil)
+
+  (calc-show-banner t))
+  "List of variables (and default values) used in customizing GNU Calc.")
+
+(mapcar (function (lambda (v)
+                    (or (boundp (car v))
+                        (set (car v) (nth 1 v)))
+                    (if (nth 2 v)
+                        (put (car v) 'variable-documentation (nth 2 v)))))
+        calc-mode-var-list)

 (defconst calc-local-var-list '(calc-stack
 				calc-stack-top
@@ -666,9 +728,23 @@
 (defvar calc-trail-buffer nil)		; Pointer to Calc Trail buffer.
 (defvar calc-why nil)			; Explanations of most recent errors.
 (defvar calc-next-why nil)
-(defvar calc-inverse-flag nil)
-(defvar calc-hyperbolic-flag nil)
-(defvar calc-keep-args-flag nil)
+(defvar calc-inverse-flag nil
+  "If non-nil, next operation is Inverse.")
+(defvar calc-hyperbolic-flag nil
+  "If non-nil, next operation is Hyperbolic.")
+(defvar calc-keep-args-flag nil
+  "If non-nil, next operation should not remove its arguments from stack.")
+(defvar calc-function-open "("
+  "Open-parenthesis string for function call notation.")
+(defvar calc-function-close ")"
+  "Close-parenthesis string for function call notation.")
+(defvar calc-language-output-filter nil
+  "Function through which to pass strings after formatting.")
+(defvar calc-language-input-filter nil
+  "Function through which to pass strings before parsing.")
+(defvar calc-radix-formatter nil
+  "Formatting function used for non-decimal numbers.")
+
 (defvar calc-last-kill nil)		; Last number killed in calc-mode.
 (defvar calc-previous-alg-entry nil)	; Previous algebraic entry.
 (defvar calc-dollar-values nil)		; Values to be used for '$'.
@@ -982,7 +1058,7 @@
   (setq calc-stack-top (- (length calc-stack) calc-stack-top -1))
   (or calc-loaded-settings-file
       (null calc-settings-file)
-      (string-match "\\.emacs" calc-settings-file)
+      (equal calc-settings-file user-init-file)
       (progn
 	(setq calc-loaded-settings-file t)
 	(load calc-settings-file t)))   ; t = missing-ok
--- a/lisp/gnus/ChangeLog	Wed Sep 15 09:00:10 2004 +0000
+++ b/lisp/gnus/ChangeLog	Fri Sep 17 14:31:05 2004 +0000
@@ -1,3 +1,12 @@
+2004-09-16  Reiner Steib  <Reiner.Steib@gmx.de>
+
+	* gnus-sum.el (gnus-fetch-old-headers): Added custom choices `t'
+	and `invisible'.
+
+2004-09-13  Simon Josefsson  <jas@extundo.com>
+
+	* nnimap.el (nnimap-demule): Revert 2004-08-30 change.
+
 2004-09-13  Reiner Steib  <Reiner.Steib@gmx.de>

 	* gnus-sum.el (gnus-summary-copy-article): Fixed doc string.
--- a/lisp/gnus/gnus-sum.el	Wed Sep 15 09:00:10 2004 +0000
+++ b/lisp/gnus/gnus-sum.el	Fri Sep 17 14:31:05 2004 +0000
@@ -63,7 +63,7 @@
   "*Non-nil means that Gnus will try to build threads by grabbing old headers.
 If an unread article in the group refers to an older, already read (or
 just marked as read) article, the old article will not normally be
-displayed in the Summary buffer.  If this variable is non-nil, Gnus
+displayed in the Summary buffer.  If this variable is t, Gnus
 will attempt to grab the headers to the old articles, and thereby
 build complete threads.  If it has the value `some', only enough
 headers to connect otherwise loose threads will be displayed.  This
@@ -74,7 +74,9 @@
 The server has to support NOV for any of this to work."
   :group 'gnus-thread
   :type '(choice (const :tag "off" nil)
+		 (const :tag "on" t)
 		 (const some)
+		 (const invisible)
 		 number
 		 (sexp :menu-tag "other" t)))
--- a/lisp/gnus/nnimap.el	Wed Sep 15 09:00:10 2004 +0000
+++ b/lisp/gnus/nnimap.el	Fri Sep 17 14:31:05 2004 +0000
@@ -812,9 +812,11 @@
   ;; BEWARE: we used to use string-as-multibyte here which is braindead
   ;; because it will turn accidental emacs-mule-valid byte sequences
   ;; into multibyte chars.  --Stef
-  (funcall (if (and (fboundp 'string-to-multibyte)
-		    (subrp (symbol-function 'string-to-multibyte)))
-	       'string-to-multibyte
+  ;; Reverted, braindead got 7.5 out of 10 on imdb, so it can't be
+  ;; that bad. --Simon
+  (funcall (if (and (fboundp 'string-as-multibyte)
+		    (subrp (symbol-function 'string-as-multibyte)))
+	       'string-as-multibyte
 	     'identity)
 	   (or string "")))
--- a/lisp/vc.el	Wed Sep 15 09:00:10 2004 +0000
+++ b/lisp/vc.el	Fri Sep 17 14:31:05 2004 +0000
@@ -338,7 +338,8 @@
 ;;   in the buffer.  You can safely assume that point is placed at the
 ;;   beginning of each line, starting at `point-min'.  The buffer that
 ;;   point is placed in is the Annotate output, as defined by the
-;;   relevant backend.
+;;   relevant backend.  This function also affects how much of the line
+;;   is fontified; where it leaves point is where fontification begins.
 ;;
 ;; - annotate-current-time ()
 ;;
@@ -2896,7 +2897,7 @@
   (message "Redisplaying annotation...done"))

 (defun vc-annotate-display-autoscale (&optional full)
-  "Highlight the output of \\[vc-annotate]] using an autoscaled color map.
+  "Highlight the output of \\[vc-annotate] using an autoscaled color map.
 Autoscaling means that the map is scaled from the current time to the
 oldest annotation in the buffer, or, with argument FULL non-nil, to
 cover the range from the oldest annotation to the newest."