Mercurial > emacs
changeset 84111:36dfa0b3a8b7
Move here from ../../lispref
| author | Glenn Morris <rgm@gnu.org> |
|---|---|
| date | Thu, 06 Sep 2007 04:24:24 +0000 |
| parents | 31cb27daaf76 |
| children | 7087f74a4f1d |
| files | doc/lispref/vol2.texi |
| diffstat | 1 files changed, 1506 insertions(+), 0 deletions(-) [+] |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/doc/lispref/vol2.texi Thu Sep 06 04:24:24 2007 +0000 @@ -0,0 +1,1506 @@ +\input texinfo @c -*-texinfo-*- +@c This file is used for printing the GNU Emacs Lisp Reference Manual +@c in two volumes. It is a modified version of elisp.texi. +@c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2001, +@c 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. +@c %**start of header +@setfilename elisp +@settitle GNU Emacs Lisp Reference Manual: Volume 2 +@c %**end of header + +@c See two-volume-cross-refs.txt. +@tex +\message{Formatting for two volume edition...Volume 2...} +% +% Read special toc file, set up in two-volume.make. +\gdef\tocreadfilename{elisp2-toc-ready.toc} +% +% Don't make outlines, they're not needed and \readdatafile can't pay +% attention to the special definition above. +\global\let\pdfmakeoutlines=\relax +% +% Start volume 2 chapter numbering at 27; this must be listed as chapno26 +\global\chapno=26 +@end tex + +@c Version of the manual and of Emacs. +@c Please remember to update the edition number in README as well. +@set VERSION 2.9 +@set EMACSVER 22 + +@dircategory Emacs +@direntry +* Elisp: (elisp). The Emacs Lisp Reference Manual. +@end direntry + +@c in general, keep the following line commented out, unless doing a +@c copy of this manual that will be published. the manual should go +@c onto the distribution in the full, 8.5 x 11" size. +@set smallbook + +@ifset smallbook +@smallbook +@end ifset + +@c per rms and peterb, use 10pt fonts for the main text, mostly to +@c save on paper cost. +@c Do this inside @tex for now, so current makeinfo does not complain. +@tex +@ifset smallbook +@fonttextsize 10 +\global\let\urlcolor=\Black % don't print links in grayscale +\global\let\linkcolor=\Black +@end ifset +\global\hbadness=6666 % don't worry about not-too-underfull boxes +@end tex + +@c Combine indices. +@synindex cp fn +@syncodeindex vr fn +@syncodeindex ky fn +@syncodeindex pg fn +@c We use the "type index" to index new functions and variables. +@c @syncodeindex tp fn + +@copying +This is edition @value{VERSION} of the GNU Emacs Lisp Reference Manual,@* +corresponding to Emacs version @value{EMACSVER}. + +Copyright @copyright{} 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, +1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software +Foundation, Inc. + +@quotation +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.2 or +any later version published by the Free Software Foundation; with the +Invariant Sections being ``GNU General Public License,'' with the +Front-Cover texts being ``A GNU Manual,'' and with the Back-Cover +Texts as in (a) below. A copy of the license is included in the +section entitled ``GNU Free Documentation License.'' + +(a) The FSF's Back-Cover Text is: ``You are free to copy and modify +this GNU Manual. Buying copies from GNU Press supports the FSF in +developing GNU and promoting software freedom.'' +@end quotation +@end copying + +@titlepage +@title GNU Emacs Lisp Reference Manual +@subtitle Volume 2 +@subtitle For Emacs Version @value{EMACSVER} +@subtitle Revision @value{VERSION}, June 2007 + +@author by Bil Lewis, Dan LaLiberte, Richard Stallman +@author and the GNU Manual Group +@page +@vskip 0pt plus 1filll +@insertcopying + +@sp 2 +Published by the Free Software Foundation @* +51 Franklin St, Fifth Floor @* +Boston, MA 02110-1301 @* +USA @* +ISBN 1-882114-74-4 + +@sp 2 +Cover art by Etienne Suvasa. +@end titlepage + + +@c Print the tables of contents +@summarycontents +@contents + + +@ifnottex +@node Top, Introduction, (dir), (dir) +@top Emacs Lisp + +This Info file contains edition @value{VERSION} of the GNU Emacs Lisp +Reference Manual, corresponding to GNU Emacs version @value{EMACSVER}. +@end ifnottex + +@menu +* Introduction:: Introduction and conventions used. + +* Lisp Data Types:: Data types of objects in Emacs Lisp. +* Numbers:: Numbers and arithmetic functions. +* Strings and Characters:: Strings, and functions that work on them. +* Lists:: Lists, cons cells, and related functions. +* Sequences Arrays Vectors:: Lists, strings and vectors are called sequences. + Certain functions act on any kind of sequence. + The description of vectors is here as well. +* Hash Tables:: Very fast lookup-tables. +* Symbols:: Symbols represent names, uniquely. + +* Evaluation:: How Lisp expressions are evaluated. +* Control Structures:: Conditionals, loops, nonlocal exits. +* Variables:: Using symbols in programs to stand for values. +* Functions:: A function is a Lisp program + that can be invoked from other functions. +* Macros:: Macros are a way to extend the Lisp language. +* Customization:: Writing customization declarations. + +* Loading:: Reading files of Lisp code into Lisp. +* Byte Compilation:: Compilation makes programs run faster. +* Advising Functions:: Adding to the definition of a function. +* Debugging:: Tools and tips for debugging Lisp programs. + +* Read and Print:: Converting Lisp objects to text and back. +* Minibuffers:: Using the minibuffer to read input. +* Command Loop:: How the editor command loop works, + and how you can call its subroutines. +* Keymaps:: Defining the bindings from keys to commands. +* Modes:: Defining major and minor modes. +* Documentation:: Writing and using documentation strings. + +* Files:: Accessing files. +* Backups and Auto-Saving:: Controlling how backups and auto-save + files are made. +* Buffers:: Creating and using buffer objects. +* Windows:: Manipulating windows and displaying buffers. +* Frames:: Making multiple system-level windows. +* Positions:: Buffer positions and motion functions. +* Markers:: Markers represent positions and update + automatically when the text is changed. + +* Text:: Examining and changing text in buffers. +* Non-ASCII Characters:: Non-ASCII text in buffers and strings. +* Searching and Matching:: Searching buffers for strings or regexps. +* Syntax Tables:: The syntax table controls word and list parsing. +* Abbrevs:: How Abbrev mode works, and its data structures. + +* Processes:: Running and communicating with subprocesses. +* Display:: Features for controlling the screen display. +* System Interface:: Getting the user id, system type, environment + variables, and other such things. + +Appendices + +* Antinews:: Info for users downgrading to Emacs 21. +* GNU Free Documentation License:: The license for this documentation +* GPL:: Conditions for copying and changing GNU Emacs. +* Tips:: Advice and coding conventions for Emacs Lisp. +* GNU Emacs Internals:: Building and dumping Emacs; + internal data structures. +* Standard Errors:: List of all error symbols. +* Standard Buffer-Local Variables:: + List of variables buffer-local in all buffers. +* Standard Keymaps:: List of standard keymaps. +* Standard Hooks:: List of standard hook variables. + +* Index:: Index including concepts, functions, variables, + and other terms. + +@ignore +* New Symbols:: New functions and variables in Emacs @value{EMACSVER}. +@end ignore + +@c Do NOT modify the following 3 lines! They must have this form to +@c be correctly identified by `texinfo-multiple-files-update'. In +@c particular, the detailed menu header line MUST be identical to the +@c value of `texinfo-master-menu-header'. See texnfo-upd.el. + +@detailmenu + --- The Detailed Node Listing --- + --------------------------------- + +Here are other nodes that are inferiors of those already listed, +mentioned here so you can get to them in one step: + +Introduction + +* Caveats:: Flaws and a request for help. +* Lisp History:: Emacs Lisp is descended from Maclisp. +* Conventions:: How the manual is formatted. +* Version Info:: Which Emacs version is running? +* Acknowledgements:: The authors, editors, and sponsors of this manual. + +Conventions + +* Some Terms:: Explanation of terms we use in this manual. +* nil and t:: How the symbols @code{nil} and @code{t} are used. +* Evaluation Notation:: The format we use for examples of evaluation. +* Printing Notation:: The format we use for examples that print output. +* Error Messages:: The format we use for examples of errors. +* Buffer Text Notation:: The format we use for buffer contents in examples. +* Format of Descriptions:: Notation for describing functions, variables, etc. + +Format of Descriptions + +* A Sample Function Description:: A description of an imaginary + function, @code{foo}. +* A Sample Variable Description:: A description of an imaginary + variable, @code{electric-future-map}. + +Lisp Data Types + +* Printed Representation:: How Lisp objects are represented as text. +* Comments:: Comments and their formatting conventions. +* Programming Types:: Types found in all Lisp systems. +* Editing Types:: Types specific to Emacs. +* Circular Objects:: Read syntax for circular structure. +* Type Predicates:: Tests related to types. +* Equality Predicates:: Tests of equality between any two objects. + +Programming Types + +* Integer Type:: Numbers without fractional parts. +* Floating Point Type:: Numbers with fractional parts and with a large range. +* Character Type:: The representation of letters, numbers and + control characters. +* Symbol Type:: A multi-use object that refers to a function, + variable, property list, or itself. +* Sequence Type:: Both lists and arrays are classified as sequences. +* Cons Cell Type:: Cons cells, and lists (which are made from cons cells). +* Array Type:: Arrays include strings and vectors. +* String Type:: An (efficient) array of characters. +* Vector Type:: One-dimensional arrays. +* Char-Table Type:: One-dimensional sparse arrays indexed by characters. +* Bool-Vector Type:: One-dimensional arrays of @code{t} or @code{nil}. +* Hash Table Type:: Super-fast lookup tables. +* Function Type:: A piece of executable code you can call from elsewhere. +* Macro Type:: A method of expanding an expression into another + expression, more fundamental but less pretty. +* Primitive Function Type:: A function written in C, callable from Lisp. +* Byte-Code Type:: A function written in Lisp, then compiled. +* Autoload Type:: A type used for automatically loading seldom-used + functions. + +Character Type + +* Basic Char Syntax:: Syntax for regular characters. +* General Escape Syntax:: How to specify characters by their codes. +* Ctl-Char Syntax:: Syntax for control characters. +* Meta-Char Syntax:: Syntax for meta-characters. +* Other Char Bits:: Syntax for hyper-, super-, and alt-characters. + +Cons Cell and List Types + +* Box Diagrams:: Drawing pictures of lists. +* Dotted Pair Notation:: An alternative syntax for lists. +* Association List Type:: A specially constructed list. + +String Type + +* Syntax for Strings:: How to specify Lisp strings. +* Non-ASCII in Strings:: International characters in strings. +* Nonprinting Characters:: Literal unprintable characters in strings. +* Text Props and Strings:: Strings with text properties. + +Editing Types + +* Buffer Type:: The basic object of editing. +* Marker Type:: A position in a buffer. +* Window Type:: What makes buffers visible. +* Frame Type:: Windows subdivide frames. +* Window Configuration Type:: Recording the way a frame is subdivided. +* Frame Configuration Type:: Recording the status of all frames. +* Process Type:: A process running on the underlying OS. +* Stream Type:: Receive or send characters. +* Keymap Type:: What function a keystroke invokes. +* Overlay Type:: How an overlay is represented. + +Numbers + +* Integer Basics:: Representation and range of integers. +* Float Basics:: Representation and range of floating point. +* Predicates on Numbers:: Testing for numbers. +* Comparison of Numbers:: Equality and inequality predicates. +* Numeric Conversions:: Converting float to integer and vice versa. +* Arithmetic Operations:: How to add, subtract, multiply and divide. +* Rounding Operations:: Explicitly rounding floating point numbers. +* Bitwise Operations:: Logical and, or, not, shifting. +* Math Functions:: Trig, exponential and logarithmic functions. +* Random Numbers:: Obtaining random integers, predictable or not. + +Strings and Characters + +* String Basics:: Basic properties of strings and characters. +* Predicates for Strings:: Testing whether an object is a string or char. +* Creating Strings:: Functions to allocate new strings. +* Modifying Strings:: Altering the contents of an existing string. +* Text Comparison:: Comparing characters or strings. +* String Conversion:: Converting characters to strings and vice versa. +* Formatting Strings:: @code{format}: Emacs's analogue of @code{printf}. +* Case Conversion:: Case conversion functions. +* Case Tables:: Customizing case conversion. + +Lists + +* Cons Cells:: How lists are made out of cons cells. +* List-related Predicates:: Is this object a list? Comparing two lists. +* List Elements:: Extracting the pieces of a list. +* Building Lists:: Creating list structure. +* List Variables:: Modifying lists stored in variables. +* Modifying Lists:: Storing new pieces into an existing list. +* Sets And Lists:: A list can represent a finite mathematical set. +* Association Lists:: A list can represent a finite relation or mapping. +* Rings:: Managing a fixed-size ring of objects. + +Modifying Existing List Structure + +* Setcar:: Replacing an element in a list. +* Setcdr:: Replacing part of the list backbone. + This can be used to remove or add elements. +* Rearrangement:: Reordering the elements in a list; combining lists. + +Sequences, Arrays, and Vectors + +* Sequence Functions:: Functions that accept any kind of sequence. +* Arrays:: Characteristics of arrays in Emacs Lisp. +* Array Functions:: Functions specifically for arrays. +* Vectors:: Special characteristics of Emacs Lisp vectors. +* Vector Functions:: Functions specifically for vectors. +* Char-Tables:: How to work with char-tables. +* Bool-Vectors:: How to work with bool-vectors. + +Hash Tables + +* Creating Hash:: Functions to create hash tables. +* Hash Access:: Reading and writing the hash table contents. +* Defining Hash:: Defining new comparison methods +* Other Hash:: Miscellaneous. + +Symbols + +* Symbol Components:: Symbols have names, values, function definitions + and property lists. +* Definitions:: A definition says how a symbol will be used. +* Creating Symbols:: How symbols are kept unique. +* Property Lists:: Each symbol has a property list + for recording miscellaneous information. + +Property Lists + +* Plists and Alists:: Comparison of the advantages of property + lists and association lists. +* Symbol Plists:: Functions to access symbols' property lists. +* Other Plists:: Accessing property lists stored elsewhere. + +Evaluation + +* Intro Eval:: Evaluation in the scheme of things. +* Forms:: How various sorts of objects are evaluated. +* Quoting:: Avoiding evaluation (to put constants in + the program). +* Eval:: How to invoke the Lisp interpreter explicitly. + +Kinds of Forms + +* Self-Evaluating Forms:: Forms that evaluate to themselves. +* Symbol Forms:: Symbols evaluate as variables. +* Classifying Lists:: How to distinguish various sorts of list forms. +* Function Indirection:: When a symbol appears as the car of a list, + we find the real function via the symbol. +* Function Forms:: Forms that call functions. +* Macro Forms:: Forms that call macros. +* Special Forms:: "Special forms" are idiosyncratic primitives, + most of them extremely important. +* Autoloading:: Functions set up to load files + containing their real definitions. + +Control Structures + +* Sequencing:: Evaluation in textual order. +* Conditionals:: @code{if}, @code{cond}, @code{when}, @code{unless}. +* Combining Conditions:: @code{and}, @code{or}, @code{not}. +* Iteration:: @code{while} loops. +* Nonlocal Exits:: Jumping out of a sequence. + +Nonlocal Exits + +* Catch and Throw:: Nonlocal exits for the program's own purposes. +* Examples of Catch:: Showing how such nonlocal exits can be written. +* Errors:: How errors are signaled and handled. +* Cleanups:: Arranging to run a cleanup form if an + error happens. + +Errors + +* Signaling Errors:: How to report an error. +* Processing of Errors:: What Emacs does when you report an error. +* Handling Errors:: How you can trap errors and continue execution. +* Error Symbols:: How errors are classified for trapping them. +* Standard Errors:: List of all error symbols. + +Variables + +* Global Variables:: Variable values that exist permanently, everywhere. +* Constant Variables:: Certain "variables" have values that never change. +* Local Variables:: Variable values that exist only temporarily. +* Void Variables:: Symbols that lack values. +* Defining Variables:: A definition says a symbol is used as a variable. +* Tips for Defining:: Things you should think about when you + define a variable. +* Accessing Variables:: Examining values of variables whose names + are known only at run time. +* Setting Variables:: Storing new values in variables. +* Variable Scoping:: How Lisp chooses among local and global values. +* Buffer-Local Variables:: Variable values in effect only in one buffer. +* Frame-Local Variables:: Variable values in effect only in one frame. +* Future Local Variables:: New kinds of local values we might add some day. +* File Local Variables:: Handling local variable lists in files. +* Variable Aliases:: Variables that are aliases for other variables. +* Variables with Restricted Values:: Non-constant variables whose value can + @emph{not} be an arbitrary Lisp object. +* Standard Buffer-Local Variables:: + List of variables buffer-local in all buffers. + +Scoping Rules for Variable Bindings + +* Scope:: Scope means where in the program a value + is visible. Comparison with other languages. +* Extent:: Extent means how long in time a value exists. +* Impl of Scope:: Two ways to implement dynamic scoping. +* Using Scoping:: How to use dynamic scoping carefully and + avoid problems. + +Buffer-Local Variables + +* Intro to Buffer-Local:: Introduction and concepts. +* Creating Buffer-Local:: Creating and destroying buffer-local bindings. +* Default Value:: The default value is seen in buffers + that don't have their own buffer-local values. + +Functions + +* What Is a Function:: Lisp functions vs primitives; terminology. +* Lambda Expressions:: How functions are expressed as Lisp objects. +* Function Names:: A symbol can serve as the name of a function. +* Defining Functions:: Lisp expressions for defining functions. +* Calling Functions:: How to use an existing function. +* Mapping Functions:: Applying a function to each element of a list, etc. +* Anonymous Functions:: Lambda-expressions are functions with no names. +* Function Cells:: Accessing or setting the function definition + of a symbol. +* Obsolete Functions:: Declaring functions obsolete. +* Inline Functions:: Defining functions that the compiler will open code. +* Function Safety:: Determining whether a function is safe to call. +* Related Topics:: Cross-references to specific Lisp primitives + that have a special bearing on how + functions work. + +Lambda Expressions + +* Lambda Components:: The parts of a lambda expression. +* Simple Lambda:: A simple example. +* Argument List:: Details and special features of argument lists. +* Function Documentation:: How to put documentation in a function. + +Macros + +* Simple Macro:: A basic example. +* Expansion:: How, when and why macros are expanded. +* Compiling Macros:: How macros are expanded by the compiler. +* Defining Macros:: How to write a macro definition. +* Backquote:: Easier construction of list structure. +* Problems with Macros:: Don't evaluate the macro arguments too many times. + Don't hide the user's variables. +* Indenting Macros:: Specifying how to indent macro calls. + +Common Problems Using Macros + +* Wrong Time:: Do the work in the expansion, not in the macro. +* Argument Evaluation:: The expansion should evaluate each macro arg once. +* Surprising Local Vars:: Local variable bindings in the expansion + require special care. +* Eval During Expansion:: Don't evaluate them; put them in the expansion. +* Repeated Expansion:: Avoid depending on how many times expansion is done. + +Writing Customization Definitions + +* Common Keywords:: Common keyword arguments for all kinds of + customization declarations. +* Group Definitions:: Writing customization group definitions. +* Variable Definitions:: Declaring user options. +* Customization Types:: Specifying the type of a user option. + +Customization Types + +* Simple Types:: Simple customization types: sexp, integer, number, + string, file, directory, alist. +* Composite Types:: Build new types from other types or data. +* Splicing into Lists:: Splice elements into list with @code{:inline}. +* Type Keywords:: Keyword-argument pairs in a customization type. +* Defining New Types:: Give your type a name. + +Loading + +* How Programs Do Loading:: The @code{load} function and others. +* Load Suffixes:: Details about the suffixes that @code{load} tries. +* Library Search:: Finding a library to load. +* Loading Non-ASCII:: Non-@acronym{ASCII} characters in Emacs Lisp files. +* Autoload:: Setting up a function to autoload. +* Repeated Loading:: Precautions about loading a file twice. +* Named Features:: Loading a library if it isn't already loaded. +* Where Defined:: Finding which file defined a certain symbol. +* Unloading:: How to "unload" a library that was loaded. +* Hooks for Loading:: Providing code to be run when + particular libraries are loaded. + +Byte Compilation + +* Speed of Byte-Code:: An example of speedup from byte compilation. +* Compilation Functions:: Byte compilation functions. +* Docs and Compilation:: Dynamic loading of documentation strings. +* Dynamic Loading:: Dynamic loading of individual functions. +* Eval During Compile:: Code to be evaluated when you compile. +* Compiler Errors:: Handling compiler error messages. +* Byte-Code Objects:: The data type used for byte-compiled functions. +* Disassembly:: Disassembling byte-code; how to read byte-code. + +Advising Emacs Lisp Functions + +* Simple Advice:: A simple example to explain the basics of advice. +* Defining Advice:: Detailed description of @code{defadvice}. +* Around-Advice:: Wrapping advice around a function's definition. +* Computed Advice:: ...is to @code{defadvice} as @code{fset} is to @code{defun}. +* Activation of Advice:: Advice doesn't do anything until you activate it. +* Enabling Advice:: You can enable or disable each piece of advice. +* Preactivation:: Preactivation is a way of speeding up the + loading of compiled advice. +* Argument Access in Advice:: How advice can access the function's arguments. +* Advising Primitives:: Accessing arguments when advising a primitive. +* Combined Definition:: How advice is implemented. + +Debugging Lisp Programs + +* Debugger:: How the Emacs Lisp debugger is implemented. +* Edebug:: A source-level Emacs Lisp debugger. +* Syntax Errors:: How to find syntax errors. +* Test Coverage:: Ensuring you have tested all branches in your code. +* Compilation Errors:: How to find errors that show up in + byte compilation. + +The Lisp Debugger + +* Error Debugging:: Entering the debugger when an error happens. +* Infinite Loops:: Stopping and debugging a program that doesn't exit. +* Function Debugging:: Entering it when a certain function is called. +* Explicit Debug:: Entering it at a certain point in the program. +* Using Debugger:: What the debugger does; what you see while in it. +* Debugger Commands:: Commands used while in the debugger. +* Invoking the Debugger:: How to call the function @code{debug}. +* Internals of Debugger:: Subroutines of the debugger, and global variables. + +Edebug + +* Using Edebug:: Introduction to use of Edebug. +* Instrumenting:: You must instrument your code + in order to debug it with Edebug. +* Edebug Execution Modes:: Execution modes, stopping more or less often. +* Jumping:: Commands to jump to a specified place. +* Edebug Misc:: Miscellaneous commands. +* Breaks:: Setting breakpoints to make the program stop. +* Trapping Errors:: Trapping errors with Edebug. +* Edebug Views:: Views inside and outside of Edebug. +* Edebug Eval:: Evaluating expressions within Edebug. +* Eval List:: Expressions whose values are displayed + each time you enter Edebug. +* Printing in Edebug:: Customization of printing. +* Trace Buffer:: How to produce trace output in a buffer. +* Coverage Testing:: How to test evaluation coverage. +* The Outside Context:: Data that Edebug saves and restores. +* Edebug and Macros:: Specifying how to handle macro calls. +* Edebug Options:: Option variables for customizing Edebug. + +Debugging Invalid Lisp Syntax + +* Excess Open:: How to find a spurious open paren or missing close. +* Excess Close:: How to find a spurious close paren or missing open. + +Reading and Printing Lisp Objects + +* Streams Intro:: Overview of streams, reading and printing. +* Input Streams:: Various data types that can be used as + input streams. +* Input Functions:: Functions to read Lisp objects from text. +* Output Streams:: Various data types that can be used as + output streams. +* Output Functions:: Functions to print Lisp objects as text. +* Output Variables:: Variables that control what the printing + functions do. + +Minibuffers + +* Intro to Minibuffers:: Basic information about minibuffers. +* Text from Minibuffer:: How to read a straight text string. +* Object from Minibuffer:: How to read a Lisp object or expression. +* Minibuffer History:: Recording previous minibuffer inputs + so the user can reuse them. +* Initial Input:: Specifying initial contents for the minibuffer. +* Completion:: How to invoke and customize completion. +* Yes-or-No Queries:: Asking a question with a simple answer. +* Multiple Queries:: Asking a series of similar questions. +* Reading a Password:: Reading a password from the terminal. +* Minibuffer Commands:: Commands used as key bindings in minibuffers. +* Minibuffer Contents:: How such commands access the minibuffer text. +* Minibuffer Windows:: Operating on the special minibuffer windows. +* Recursive Mini:: Whether recursive entry to minibuffer is allowed. +* Minibuffer Misc:: Various customization hooks and variables. + +Completion + +* Basic Completion:: Low-level functions for completing strings. + (These are too low level to use the minibuffer.) +* Minibuffer Completion:: Invoking the minibuffer with completion. +* Completion Commands:: Minibuffer commands that do completion. +* High-Level Completion:: Convenient special cases of completion + (reading buffer name, file name, etc.) +* Reading File Names:: Using completion to read file names. +* Programmed Completion:: Finding the completions for a given file name. + +Command Loop + +* Command Overview:: How the command loop reads commands. +* Defining Commands:: Specifying how a function should read arguments. +* Interactive Call:: Calling a command, so that it will read arguments. +* Command Loop Info:: Variables set by the command loop for you to examine. +* Adjusting Point:: Adjustment of point after a command. +* Input Events:: What input looks like when you read it. +* Reading Input:: How to read input events from the keyboard or mouse. +* Special Events:: Events processed immediately and individually. +* Waiting:: Waiting for user input or elapsed time. +* Quitting:: How @kbd{C-g} works. How to catch or defer quitting. +* Prefix Command Arguments:: How the commands to set prefix args work. +* Recursive Editing:: Entering a recursive edit, + and why you usually shouldn't. +* Disabling Commands:: How the command loop handles disabled commands. +* Command History:: How the command history is set up, and how accessed. +* Keyboard Macros:: How keyboard macros are implemented. + +Defining Commands + +* Using Interactive:: General rules for @code{interactive}. +* Interactive Codes:: The standard letter-codes for reading arguments + in various ways. +* Interactive Examples:: Examples of how to read interactive arguments. + +Input Events + +* Keyboard Events:: Ordinary characters--keys with symbols on them. +* Function Keys:: Function keys--keys with names, not symbols. +* Mouse Events:: Overview of mouse events. +* Click Events:: Pushing and releasing a mouse button. +* Drag Events:: Moving the mouse before releasing the button. +* Button-Down Events:: A button was pushed and not yet released. +* Repeat Events:: Double and triple click (or drag, or down). +* Motion Events:: Just moving the mouse, not pushing a button. +* Focus Events:: Moving the mouse between frames. +* Misc Events:: Other events the system can generate. +* Event Examples:: Examples of the lists for mouse events. +* Classifying Events:: Finding the modifier keys in an event symbol. +* Accessing Events:: Functions to extract info from events. +* Strings of Events:: Special considerations for putting + keyboard character events in a string. + +Reading Input + +* Key Sequence Input:: How to read one key sequence. +* Reading One Event:: How to read just one event. +* Event Mod:: How Emacs modifies events as they are read. +* Invoking the Input Method:: How reading an event uses the input method. +* Quoted Character Input:: Asking the user to specify a character. +* Event Input Misc:: How to reread or throw away input events. + +Keymaps + +* Key Sequences:: Key sequences as Lisp objects. +* Keymap Basics:: Basic concepts of keymaps. +* Format of Keymaps:: What a keymap looks like as a Lisp object. +* Creating Keymaps:: Functions to create and copy keymaps. +* Inheritance and Keymaps:: How one keymap can inherit the bindings + of another keymap. +* Prefix Keys:: Defining a key with a keymap as its definition. +* Active Keymaps:: How Emacs searches the active keymaps + for a key binding. +* Searching Keymaps:: A pseudo-Lisp summary of searching active maps. +* Controlling Active Maps:: Each buffer has a local keymap + to override the standard (global) bindings. + A minor mode can also override them. +* Key Lookup:: How extracting elements from keymaps works. +* Functions for Key Lookup:: How to request key lookup. +* Changing Key Bindings:: Redefining a key in a keymap. +* Remapping Commands:: A keymap can translate one command to another. +* Translation Keymaps:: Keymaps for translating sequences of events. +* Key Binding Commands:: Interactive interfaces for redefining keys. +* Scanning Keymaps:: Looking through all keymaps, for printing help. +* Menu Keymaps:: A keymap can define a menu for X + or for use from the terminal. +* Standard Keymaps:: List of standard keymaps. + +Major and Minor Modes + +* Hooks:: How to use hooks; how to write code that + provides hooks. +* Major Modes:: Defining major modes. +* Minor Modes:: Defining minor modes. +* Mode Line Format:: Customizing the text that appears in the mode line. +* Imenu:: How a mode can provide a menu + of definitions in the buffer. +* Font Lock Mode:: How modes can highlight text according to syntax. +* Desktop Save Mode:: How modes can have buffer state saved between + Emacs sessions. + +Menu Keymaps + +* Defining Menus:: How to make a keymap that defines a menu. +* Mouse Menus:: How users actuate the menu with the mouse. +* Keyboard Menus:: How users actuate the menu with the keyboard. +* Menu Example:: Making a simple menu. +* Menu Bar:: How to customize the menu bar. +* Tool Bar:: A tool bar is a row of images. +* Modifying Menus:: How to add new items to a menu. + +Defining Menus + +* Simple Menu Items:: A simple kind of menu key binding, + limited in capabilities. +* Extended Menu Items:: More powerful menu item definitions + let you specify keywords to enable + various features. +* Menu Separators:: Drawing a horizontal line through a menu. +* Alias Menu Items:: Using command aliases in menu items. + +Major and Minor Modes + +* Hooks:: How to use hooks; how to write code that provides hooks. +* Major Modes:: Defining major modes. +* Minor Modes:: Defining minor modes. +* Mode Line Format:: Customizing the text that appears in the mode line. +* Imenu:: How a mode can provide a menu + of definitions in the buffer. +* Font Lock Mode:: How modes can highlight text according to syntax. +* Desktop Save Mode:: How modes can have buffer state saved between + Emacs sessions. + +Major Modes + +* Major Mode Basics:: +* Major Mode Conventions:: Coding conventions for keymaps, etc. +* Example Major Modes:: Text mode and Lisp modes. +* Auto Major Mode:: How Emacs chooses the major mode automatically. +* Mode Help:: Finding out how to use a mode. +* Derived Modes:: Defining a new major mode based on another major + mode. +* Generic Modes:: Defining a simple major mode that supports + comment syntax and Font Lock mode. +* Mode Hooks:: Hooks run at the end of major mode functions. + +Minor Modes + +* Minor Mode Conventions:: Tips for writing a minor mode. +* Keymaps and Minor Modes:: How a minor mode can have its own keymap. +* Defining Minor Modes:: A convenient facility for defining minor modes. + +Mode Line Format + +* Mode Line Basics:: +* Mode Line Data:: The data structure that controls the mode line. +* Mode Line Variables:: Variables used in that data structure. +* %-Constructs:: Putting information into a mode line. +* Properties in Mode:: Using text properties in the mode line. +* Header Lines:: Like a mode line, but at the top. +* Emulating Mode Line:: Formatting text as the mode line would. + +Font Lock Mode + +* Font Lock Basics:: Overview of customizing Font Lock. +* Search-based Fontification:: Fontification based on regexps. +* Customizing Keywords:: Customizing search-based fontification. +* Other Font Lock Variables:: Additional customization facilities. +* Levels of Font Lock:: Each mode can define alternative levels + so that the user can select more or less. +* Precalculated Fontification:: How Lisp programs that produce the buffer + contents can also specify how to fontify it. +* Faces for Font Lock:: Special faces specifically for Font Lock. +* Syntactic Font Lock:: Fontification based on syntax tables. +* Setting Syntax Properties:: Defining character syntax based on context + using the Font Lock mechanism. +* Multiline Font Lock:: How to coerce Font Lock into properly + highlighting multiline constructs. + +Multiline Font Lock Constructs + +* Font Lock Multiline:: Marking multiline chunks with a text property +* Region to Fontify:: Controlling which region gets refontified + after a buffer change. + +Documentation + +* Documentation Basics:: Good style for doc strings. + Where to put them. How Emacs stores them. +* Accessing Documentation:: How Lisp programs can access doc strings. +* Keys in Documentation:: Substituting current key bindings. +* Describing Characters:: Making printable descriptions of + non-printing characters and key sequences. +* Help Functions:: Subroutines used by Emacs help facilities. + +Files + +* Visiting Files:: Reading files into Emacs buffers for editing. +* Saving Buffers:: Writing changed buffers back into files. +* Reading from Files:: Reading files into other buffers. +* Writing to Files:: Writing new files from parts of buffers. +* File Locks:: Locking and unlocking files, to prevent + simultaneous editing by two people. +* Information about Files:: Testing existence, accessibility, size of files. +* Changing Files:: Renaming files, changing protection, etc. +* File Names:: Decomposing and expanding file names. +* Contents of Directories:: Getting a list of the files in a directory. +* Create/Delete Dirs:: Creating and Deleting Directories. +* Magic File Names:: Defining "magic" special handling + for certain file names. +* Format Conversion:: Conversion to and from various file formats. + +Visiting Files + +* Visiting Functions:: The usual interface functions for visiting. +* Subroutines of Visiting:: Lower-level subroutines that they use. + +Information about Files + +* Testing Accessibility:: Is a given file readable? Writable? +* Kinds of Files:: Is it a directory? A symbolic link? +* Truenames:: Eliminating symbolic links from a file name. +* File Attributes:: How large is it? Any other names? Etc. +* Locating Files:: How to find a file in standard places. + +File Names + +* File Name Components:: The directory part of a file name, and the rest. +* Relative File Names:: Some file names are relative to a + current directory. +* Directory Names:: A directory's name as a directory + is different from its name as a file. +* File Name Expansion:: Converting relative file names to absolute ones. +* Unique File Names:: Generating names for temporary files. +* File Name Completion:: Finding the completions for a given file name. +* Standard File Names:: If your package uses a fixed file name, + how to handle various operating systems simply. + +Backups and Auto-Saving + +* Backup Files:: How backup files are made; how their names + are chosen. +* Auto-Saving:: How auto-save files are made; how their + names are chosen. +* Reverting:: @code{revert-buffer}, and how to customize + what it does. + +Backup Files + +* Making Backups:: How Emacs makes backup files, and when. +* Rename or Copy:: Two alternatives: renaming the old file + or copying it. +* Numbered Backups:: Keeping multiple backups for each source file. +* Backup Names:: How backup file names are computed; customization. + +Buffers + +* Buffer Basics:: What is a buffer? +* Current Buffer:: Designating a buffer as current + so primitives will access its contents. +* Buffer Names:: Accessing and changing buffer names. +* Buffer File Name:: The buffer file name indicates which file + is visited. +* Buffer Modification:: A buffer is @dfn{modified} if it needs to be saved. +* Modification Time:: Determining whether the visited file was changed + ``behind Emacs's back''. +* Read Only Buffers:: Modifying text is not allowed in a + read-only buffer. +* The Buffer List:: How to look at all the existing buffers. +* Creating Buffers:: Functions that create buffers. +* Killing Buffers:: Buffers exist until explicitly killed. +* Indirect Buffers:: An indirect buffer shares text with some + other buffer. +* Buffer Gap:: The gap in the buffer. + +Windows + +* Basic Windows:: Basic information on using windows. +* Splitting Windows:: Splitting one window into two windows. +* Deleting Windows:: Deleting a window gives its space to other windows. +* Selecting Windows:: The selected window is the one that you edit in. +* Cyclic Window Ordering:: Moving around the existing windows. +* Buffers and Windows:: Each window displays the contents of a buffer. +* Displaying Buffers:: Higher-level functions for displaying a buffer + and choosing a window for it. +* Choosing Window:: How to choose a window for displaying a buffer. +* Window Point:: Each window has its own location of point. +* Window Start:: The display-start position controls which text + is on-screen in the window. +* Textual Scrolling:: Moving text up and down through the window. +* Vertical Scrolling:: Moving the contents up and down on the window. +* Horizontal Scrolling:: Moving the contents sideways on the window. +* Size of Window:: Accessing the size of a window. +* Resizing Windows:: Changing the size of a window. +* Coordinates and Windows:: Converting coordinates to windows. +* Window Tree:: The layout and sizes of all windows in a frame. +* Window Configurations:: Saving and restoring the state of the screen. +* Window Hooks:: Hooks for scrolling, window size changes, + redisplay going past a certain point, + or window configuration changes. + +Frames + +* Creating Frames:: Creating additional frames. +* Multiple Displays:: Creating frames on other displays. +* Frame Parameters:: Controlling frame size, position, font, etc. +* Frame Titles:: Automatic updating of frame titles. +* Deleting Frames:: Frames last until explicitly deleted. +* Finding All Frames:: How to examine all existing frames. +* Frames and Windows:: A frame contains windows; + display of text always works through windows. +* Minibuffers and Frames:: How a frame finds the minibuffer to use. +* Input Focus:: Specifying the selected frame. +* Visibility of Frames:: Frames may be visible or invisible, or icons. +* Raising and Lowering:: Raising a frame makes it hide other windows; + lowering it puts it underneath the others. +* Frame Configurations:: Saving the state of all frames. +* Mouse Tracking:: Getting events that say when the mouse moves. +* Mouse Position:: Asking where the mouse is, or moving it. +* Pop-Up Menus:: Displaying a menu for the user to select from. +* Dialog Boxes:: Displaying a box to ask yes or no. +* Pointer Shape:: Specifying the shape of the mouse pointer. +* Window System Selections::Transferring text to and from other windows. +* Drag and Drop:: Internals of Drag-and-Drop implementation. +* Color Names:: Getting the definitions of color names. +* Text Terminal Colors:: Defining colors for text-only terminals. +* Resources:: Getting resource values from the server. +* Display Feature Testing:: Determining the features of a terminal. + +Frame Parameters + +* Parameter Access:: How to change a frame's parameters. +* Initial Parameters:: Specifying frame parameters when you make a frame. +* Window Frame Parameters:: List of frame parameters for window systems. +* Size and Position:: Changing the size and position of a frame. +* Geometry:: Parsing geometry specifications. + +Window Frame Parameters + +* Basic Parameters:: Parameters that are fundamental. +* Position Parameters:: The position of the frame on the screen. +* Size Parameters:: Frame's size. +* Layout Parameters:: Size of parts of the frame, and + enabling or disabling some parts. +* Buffer Parameters:: Which buffers have been or should be shown. +* Management Parameters:: Communicating with the window manager. +* Cursor Parameters:: Controlling the cursor appearance. +* Color Parameters:: Colors of various parts of the frame. + +Positions + +* Point:: The special position where editing takes place. +* Motion:: Changing point. +* Excursions:: Temporary motion and buffer changes. +* Narrowing:: Restricting editing to a portion of the buffer. + +Motion + +* Character Motion:: Moving in terms of characters. +* Word Motion:: Moving in terms of words. +* Buffer End Motion:: Moving to the beginning or end of the buffer. +* Text Lines:: Moving in terms of lines of text. +* Screen Lines:: Moving in terms of lines as displayed. +* List Motion:: Moving by parsing lists and sexps. +* Skipping Characters:: Skipping characters belonging to a certain set. + +Markers + +* Overview of Markers:: The components of a marker, and how it relocates. +* Predicates on Markers:: Testing whether an object is a marker. +* Creating Markers:: Making empty markers or markers at certain places. +* Information from Markers::Finding the marker's buffer or character + position. +* Marker Insertion Types:: Two ways a marker can relocate when you + insert where it points. +* Moving Markers:: Moving the marker to a new buffer or position. +* The Mark:: How "the mark" is implemented with a marker. +* The Region:: How to access "the region". + +Text + +* Near Point:: Examining text in the vicinity of point. +* Buffer Contents:: Examining text in a general fashion. +* Comparing Text:: Comparing substrings of buffers. +* Insertion:: Adding new text to a buffer. +* Commands for Insertion:: User-level commands to insert text. +* Deletion:: Removing text from a buffer. +* User-Level Deletion:: User-level commands to delete text. +* The Kill Ring:: Where removed text sometimes is saved for + later use. +* Undo:: Undoing changes to the text of a buffer. +* Maintaining Undo:: How to enable and disable undo information. + How to control how much information is kept. +* Filling:: Functions for explicit filling. +* Margins:: How to specify margins for filling commands. +* Adaptive Fill:: Adaptive Fill mode chooses a fill prefix + from context. +* Auto Filling:: How auto-fill mode is implemented to break lines. +* Sorting:: Functions for sorting parts of the buffer. +* Columns:: Computing horizontal positions, and using them. +* Indentation:: Functions to insert or adjust indentation. +* Case Changes:: Case conversion of parts of the buffer. +* Text Properties:: Assigning Lisp property lists to text characters. +* Substitution:: Replacing a given character wherever it appears. +* Transposition:: Swapping two portions of a buffer. +* Registers:: How registers are implemented. Accessing + the text or position stored in a register. +* Base 64:: Conversion to or from base 64 encoding. +* MD5 Checksum:: Compute the MD5 "message digest"/"checksum". +* Atomic Changes:: Installing several buffer changes "atomically". +* Change Hooks:: Supplying functions to be run when text is changed. + +The Kill Ring + +* Kill Ring Concepts:: What text looks like in the kill ring. +* Kill Functions:: Functions that kill text. +* Yanking:: How yanking is done. +* Yank Commands:: Commands that access the kill ring. +* Low-Level Kill Ring:: Functions and variables for kill ring access. +* Internals of Kill Ring:: Variables that hold kill-ring data. + +Indentation + +* Primitive Indent:: Functions used to count and insert indentation. +* Mode-Specific Indent:: Customize indentation for different modes. +* Region Indent:: Indent all the lines in a region. +* Relative Indent:: Indent the current line based on previous lines. +* Indent Tabs:: Adjustable, typewriter-like tab stops. +* Motion by Indent:: Move to first non-blank character. + +Text Properties + +* Examining Properties:: Looking at the properties of one character. +* Changing Properties:: Setting the properties of a range of text. +* Property Search:: Searching for where a property changes value. +* Special Properties:: Particular properties with special meanings. +* Format Properties:: Properties for representing formatting of text. +* Sticky Properties:: How inserted text gets properties from + neighboring text. +* Saving Properties:: Saving text properties in files, and reading + them back. +* Lazy Properties:: Computing text properties in a lazy fashion + only when text is examined. +* Clickable Text:: Using text properties to make regions of text + do something when you click on them. +* Links and Mouse-1:: How to make @key{Mouse-1} follow a link. +* Fields:: The @code{field} property defines + fields within the buffer. +* Not Intervals:: Why text properties do not use + Lisp-visible text intervals. + +Non-ASCII Characters + +* Text Representations:: Unibyte and multibyte representations +* Converting Representations:: Converting unibyte to multibyte and vice versa. +* Selecting a Representation:: Treating a byte sequence as unibyte or multi. +* Character Codes:: How unibyte and multibyte relate to + codes of individual characters. +* Character Sets:: The space of possible character codes + is divided into various character sets. +* Chars and Bytes:: More information about multibyte encodings. +* Splitting Characters:: Converting a character to its byte sequence. +* Scanning Charsets:: Which character sets are used in a buffer? +* Translation of Characters:: Translation tables are used for conversion. +* Coding Systems:: Coding systems are conversions for saving files. +* Input Methods:: Input methods allow users to enter various + non-ASCII characters without special keyboards. +* Locales:: Interacting with the POSIX locale. + +Coding Systems + +* Coding System Basics:: Basic concepts. +* Encoding and I/O:: How file I/O functions handle coding systems. +* Lisp and Coding Systems:: Functions to operate on coding system names. +* User-Chosen Coding Systems:: Asking the user to choose a coding system. +* Default Coding Systems:: Controlling the default choices. +* Specifying Coding Systems:: Requesting a particular coding system + for a single file operation. +* Explicit Encoding:: Encoding or decoding text without doing I/O. +* Terminal I/O Encoding:: Use of encoding for terminal I/O. +* MS-DOS File Types:: How DOS "text" and "binary" files + relate to coding systems. + +Searching and Matching + +* String Search:: Search for an exact match. +* Searching and Case:: Case-independent or case-significant searching. +* Regular Expressions:: Describing classes of strings. +* Regexp Search:: Searching for a match for a regexp. +* POSIX Regexps:: Searching POSIX-style for the longest match. +* Match Data:: Finding out which part of the text matched, + after a string or regexp search. +* Search and Replace:: Commands that loop, searching and replacing. +* Standard Regexps:: Useful regexps for finding sentences, pages,... + +Regular Expressions + +* Syntax of Regexps:: Rules for writing regular expressions. +* Regexp Example:: Illustrates regular expression syntax. +* Regexp Functions:: Functions for operating on regular expressions. + +Syntax of Regular Expressions + +* Regexp Special:: Special characters in regular expressions. +* Char Classes:: Character classes used in regular expressions. +* Regexp Backslash:: Backslash-sequences in regular expressions. + +The Match Data + +* Replacing Match:: Replacing a substring that was matched. +* Simple Match Data:: Accessing single items of match data, + such as where a particular subexpression started. +* Entire Match Data:: Accessing the entire match data at once, as a list. +* Saving Match Data:: Saving and restoring the match data. + +Syntax Tables + +* Syntax Basics:: Basic concepts of syntax tables. +* Syntax Descriptors:: How characters are classified. +* Syntax Table Functions:: How to create, examine and alter syntax tables. +* Syntax Properties:: Overriding syntax with text properties. +* Motion and Syntax:: Moving over characters with certain syntaxes. +* Parsing Expressions:: Parsing balanced expressions + using the syntax table. +* Standard Syntax Tables:: Syntax tables used by various major modes. +* Syntax Table Internals:: How syntax table information is stored. +* Categories:: Another way of classifying character syntax. + +Syntax Descriptors + +* Syntax Class Table:: Table of syntax classes. +* Syntax Flags:: Additional flags each character can have. + +Parsing Expressions + +* Motion via Parsing:: Motion functions that work by parsing. +* Position Parse:: Determining the syntactic state of a position. +* Parser State:: How Emacs represents a syntactic state. +* Low-Level Parsing:: Parsing across a specified region. +* Control Parsing:: Parameters that affect parsing. + +Abbrevs And Abbrev Expansion + +* Abbrev Mode:: Setting up Emacs for abbreviation. +* Abbrev Tables:: Creating and working with abbrev tables. +* Defining Abbrevs:: Specifying abbreviations and their expansions. +* Abbrev Files:: Saving abbrevs in files. +* Abbrev Expansion:: Controlling expansion; expansion subroutines. +* Standard Abbrev Tables:: Abbrev tables used by various major modes. + +Processes + +* Subprocess Creation:: Functions that start subprocesses. +* Shell Arguments:: Quoting an argument to pass it to a shell. +* Synchronous Processes:: Details of using synchronous subprocesses. +* Asynchronous Processes:: Starting up an asynchronous subprocess. +* Deleting Processes:: Eliminating an asynchronous subprocess. +* Process Information:: Accessing run-status and other attributes. +* Input to Processes:: Sending input to an asynchronous subprocess. +* Signals to Processes:: Stopping, continuing or interrupting + an asynchronous subprocess. +* Output from Processes:: Collecting output from an asynchronous subprocess. +* Sentinels:: Sentinels run when process run-status changes. +* Query Before Exit:: Whether to query if exiting will kill a process. +* Transaction Queues:: Transaction-based communication with subprocesses. +* Network:: Opening network connections. +* Network Servers:: Network servers let Emacs accept net connections. +* Datagrams:: UDP network connections. +* Low-Level Network:: Lower-level but more general function + to create connections and servers. +* Misc Network:: Additional relevant functions for network connections. +* Byte Packing:: Using bindat to pack and unpack binary data. + +Receiving Output from Processes + +* Process Buffers:: If no filter, output is put in a buffer. +* Filter Functions:: Filter functions accept output from the process. +* Decoding Output:: Filters can get unibyte or multibyte strings. +* Accepting Output:: How to wait until process output arrives. + +Low-Level Network Access + +* Proc: Network Processes. Using @code{make-network-process}. +* Options: Network Options. Further control over network connections. +* Features: Network Feature Testing. + Determining which network features work on + the machine you are using. + +Packing and Unpacking Byte Arrays + +* Bindat Spec:: Describing data layout. +* Bindat Functions:: Doing the unpacking and packing. +* Bindat Examples:: Samples of what bindat.el can do for you! + +Emacs Display + +* Refresh Screen:: Clearing the screen and redrawing everything on it. +* Forcing Redisplay:: Forcing redisplay. +* Truncation:: Folding or wrapping long text lines. +* The Echo Area:: Displaying messages at the bottom of the screen. +* Warnings:: Displaying warning messages for the user. +* Invisible Text:: Hiding part of the buffer text. +* Selective Display:: Hiding part of the buffer text (the old way). +* Temporary Displays:: Displays that go away automatically. +* Overlays:: Use overlays to highlight parts of the buffer. +* Width:: How wide a character or string is on the screen. +* Line Height:: Controlling the height of lines. +* Faces:: A face defines a graphics style + for text characters: font, colors, etc. +* Fringes:: Controlling window fringes. +* Scroll Bars:: Controlling vertical scroll bars. +* Display Property:: Enabling special display features. +* Images:: Displaying images in Emacs buffers. +* Buttons:: Adding clickable buttons to Emacs buffers. +* Abstract Display:: Emacs' Widget for Object Collections. +* Blinking:: How Emacs shows the matching open parenthesis. +* Usual Display:: The usual conventions for displaying nonprinting chars. +* Display Tables:: How to specify other conventions. +* Beeping:: Audible signal to the user. +* Window Systems:: Which window system is being used. + +The Echo Area + +* Displaying Messages:: Explicitly displaying text in the echo area. +* Progress:: Informing user about progress of a long operation. +* Logging Messages:: Echo area messages are logged for the user. +* Echo Area Customization:: Controlling the echo area. + +Reporting Warnings + +* Warning Basics:: Warnings concepts and functions to report them. +* Warning Variables:: Variables programs bind to customize their warnings. +* Warning Options:: Variables users set to control display of warnings. + +Overlays + +* Managing Overlays:: Creating and moving overlays. +* Overlay Properties:: How to read and set properties. + What properties do to the screen display. +* Finding Overlays:: Searching for overlays. + +Faces + +* Defining Faces:: How to define a face with @code{defface}. +* Face Attributes:: What is in a face? +* Attribute Functions:: Functions to examine and set face attributes. +* Displaying Faces:: How Emacs combines the faces specified for + a character. +* Font Selection:: Finding the best available font for a face. +* Face Functions:: How to define and examine faces. +* Auto Faces:: Hook for automatic face assignment. +* Font Lookup:: Looking up the names of available fonts + and information about them. +* Fontsets:: A fontset is a collection of fonts + that handle a range of character sets. + +Fringes + +* Fringe Size/Pos:: Specifying where to put the window fringes. +* Fringe Indicators:: Displaying indicator icons in the window fringes. +* Fringe Cursors:: Displaying cursors in the right fringe. +* Fringe Bitmaps:: Specifying bitmaps for fringe indicators. +* Customizing Bitmaps:: Specifying your own bitmaps to use in the fringes. +* Overlay Arrow:: Display of an arrow to indicate position. + +The @code{display} Property + +* Specified Space:: Displaying one space with a specified width. +* Pixel Specification:: Specifying space width or height in pixels. +* Other Display Specs:: Displaying an image; magnifying text; moving it + up or down on the page; adjusting the width + of spaces within text. +* Display Margins:: Displaying text or images to the side of + the main text. + +Images + +* Image Descriptors:: How to specify an image for use in @code{:display}. +* XBM Images:: Special features for XBM format. +* XPM Images:: Special features for XPM format. +* GIF Images:: Special features for GIF format. +* PostScript Images:: Special features for PostScript format. +* Other Image Types:: Various other formats are supported. +* Defining Images:: Convenient ways to define an image for later use. +* Showing Images:: Convenient ways to display an image once + it is defined. +* Image Cache:: Internal mechanisms of image display. + +Buttons + +* Button Properties:: Button properties with special meanings. +* Button Types:: Defining common properties for classes of buttons. +* Making Buttons:: Adding buttons to Emacs buffers. +* Manipulating Buttons:: Getting and setting properties of buttons. +* Button Buffer Commands:: Buffer-wide commands and bindings for buttons. + +Abstract Display + +* Abstract Display Functions:: Functions in the Ewoc package. +* Abstract Display Example:: Example of using Ewoc. + +Display Tables + +* Display Table Format:: What a display table consists of. +* Active Display Table:: How Emacs selects a display table to use. +* Glyphs:: How to define a glyph, and what glyphs mean. + +Operating System Interface + +* Starting Up:: Customizing Emacs start-up processing. +* Getting Out:: How exiting works (permanent or temporary). +* System Environment:: Distinguish the name and kind of system. +* User Identification:: Finding the name and user id of the user. +* Time of Day:: Getting the current time. +* Time Conversion:: Converting a time from numeric form to a string, or + to calendrical data (or vice versa). +* Time Parsing:: Converting a time from numeric form to text + and vice versa. +* Processor Run Time:: Getting the run time used by Emacs. +* Time Calculations:: Adding, subtracting, comparing times, etc. +* Timers:: Setting a timer to call a function at a certain time. +* Idle Timers:: Setting a timer to call a function when Emacs has + been idle for a certain length of time. +* Terminal Input:: Accessing and recording terminal input. +* Terminal Output:: Controlling and recording terminal output. +* Sound Output:: Playing sounds on the computer's speaker. +* X11 Keysyms:: Operating on key symbols for X Windows +* Batch Mode:: Running Emacs without terminal interaction. +* Session Management:: Saving and restoring state with X Session Management. + +Starting Up Emacs + +* Startup Summary:: Sequence of actions Emacs performs at start-up. +* Init File:: Details on reading the init file (@file{.emacs}). +* Terminal-Specific:: How the terminal-specific Lisp file is read. +* Command-Line Arguments:: How command-line arguments are processed, + and how you can customize them. + +Getting Out of Emacs + +* Killing Emacs:: Exiting Emacs irreversibly. +* Suspending Emacs:: Exiting Emacs reversibly. + +Terminal Input + +* Input Modes:: Options for how input is processed. +* Recording Input:: Saving histories of recent or all input events. + +Tips and Conventions + +* Coding Conventions:: Conventions for clean and robust programs. +* Key Binding Conventions:: Which keys should be bound by which programs. +* Programming Tips:: Making Emacs code fit smoothly in Emacs. +* Compilation Tips:: Making compiled code run fast. +* Warning Tips:: Turning off compiler warnings. +* Documentation Tips:: Writing readable documentation strings. +* Comment Tips:: Conventions for writing comments. +* Library Headers:: Standard headers for library packages. + +GNU Emacs Internals + +* Building Emacs:: How the dumped Emacs is made. +* Pure Storage:: A kludge to make preloaded Lisp functions sharable. +* Garbage Collection:: Reclaiming space for Lisp objects no longer used. +* Memory Usage:: Info about total size of Lisp objects made so far. +* Writing Emacs Primitives:: Writing C code for Emacs. +* Object Internals:: Data formats of buffers, windows, processes. + +Object Internals + +* Buffer Internals:: Components of a buffer structure. +* Window Internals:: Components of a window structure. +* Process Internals:: Components of a process structure. +@end detailmenu +@end menu + +@c include intro.texi +@c include objects.texi +@c include numbers.texi +@c include strings.texi + +@c include lists.texi +@c include sequences.texi +@c include hash.texi +@c include symbols.texi +@c include eval.texi + +@c include control.texi +@c include variables.texi +@c include functions.texi +@c include macros.texi + +@c include customize.texi +@c include loading.texi +@c include compile.texi +@c include advice.texi + +@c include debugging.texi +@c include streams.texi +@c include minibuf.texi +@c include commands.texi + +@c include keymaps.texi +@c include modes.texi +@c include help.texi +@c include files.texi + +@c include backups.texi + +@c ================ Beginning of Volume 2 ================ +@include buffers.texi +@include windows.texi +@include frames.texi + +@include positions.texi +@include markers.texi +@include text.texi +@include nonascii.texi + +@include searching.texi +@include syntax.texi +@include abbrevs.texi +@include processes.texi + +@include display.texi +@include os.texi + +@c MOVE to Emacs Manual: include misc-modes.texi + +@c appendices + +@c REMOVE this: include non-hacker.texi + +@include anti.texi +@include doclicense.texi +@include gpl.texi +@include tips.texi +@include internals.texi +@include errors.texi +@include locals.texi +@include maps.texi +@include hooks.texi + +@include index.texi + +@ignore +@node New Symbols, , Index, Top +@unnumbered New Symbols Since the Previous Edition + +@printindex tp +@end ignore + +@bye + + +These words prevent "local variables" above from confusing Emacs. + +@ignore + arch-tag: dfdbecf8-fec2-49c1-8427-3e8ac8b0b849 +@end ignore