Mercurial > emacs

--- a/man/rcirc.texi	Thu Sep 06 04:39:33 2007 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,768 +0,0 @@
-\input texinfo
-@c %**start of header
-@setfilename ../info/rcirc
-@settitle rcirc Manual
-@c %**end of header
-
-@copying
-Copyright @copyright{} 2006, 2007 Free Software Foundation, Inc.
-
-@quotation
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.2 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with the Front-Cover texts being ``A GNU Manual'',
-and with the Back-Cover Texts as in (a) below.  A copy of the license is
-included in the section entitled ``GNU Free Documentation License'' in
-the Emacs manual.
-
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
-this GNU Manual, like GNU software.  Copies published by the Free
-Software Foundation raise funds for GNU development.''
-
-This document is part of a collection distributed under the GNU Free
-Documentation License.  If you want to distribute this document
-separately from the collection, you can do so by adding a copy of the
-license to the document, as described in section 6 of the license.
-@end quotation
-@end copying
-
-@dircategory Emacs
-@direntry
-* Rcirc: (rcirc).       Internet Relay Chat (IRC) client.
-@end direntry
-
-@titlepage
-@title rcirc Manual
-@page
-@vskip 0pt plus 1filll
-@insertcopying
-@end titlepage
-
-@ifnottex
-@node Top, Basics, (dir), (dir)
-@top rcirc Manual
-@end ifnottex
-
-@code{rcirc} is an Emacs IRC client.
-
-IRC (Internet Relay Chat) is a multi-user chat protocol.  Users
-communicate with each other in real-time.  Communication occurs both in
-topic channels which are collections of many users, or privately, with
-just one other user.
-
-@menu
-* Basics::
-* Reference::
-* Hacking and Tweaking::
-* GNU Free Documentation License::
-* Key Index::
-* Variable Index::
-* Index::
-
-@detailmenu
- --- The Detailed Node Listing ---
-
-Basics
-
-* Internet Relay Chat::
-* Getting started with rcirc::
-
-Reference
-
-* rcirc commands::
-* Useful IRC commands::
-* Configuration::
-
-Hacking and Tweaking
-
-* Skipping /away messages using handlers::
-* Using fly spell mode::
-* Scrolling conservatively::
-* Changing the time stamp format::
-* Defining a new command::
-* Reconnecting after you have lost the connection::
-
-@end detailmenu
-@end menu
-
-@node Basics, Reference, Top, Top
-@chapter Basics
-
-This chapter contains a brief introduction to IRC (Internet Relay Chat),
-and a quick tutorial on @code{rcirc}.
-
-@menu
-* Internet Relay Chat::
-* Getting started with rcirc::
-@end menu
-
-@node Internet Relay Chat, Getting started with rcirc, Basics, Basics
-@section Internet Relay Chat
-@cindex internet relay chat
-@cindex irc
-
-@cindex channel
-@dfn{Internet Relay Chat} (IRC) is a form of instant communication over the
-Internet.  It is mainly designed for group (many-to-many) communication
-in discussion forums called channels, but also allows one-to-one
-communication.
-
-@cindex instant messaging, comparison
-@cindex server
-@cindex network
-Contrary to most Instant Messenger (IM) systems, users usually don't
-connect to a central server.  Instead, users connect to a random server
-in a network, and the servers share information between them.
-
-Here's a typical example:
-
-@cindex redirection to random servers
-When you connect to the Freenode network
-(@code{http://freenode.net/}), you point your IRC client at the
-server @code{irc.freenode.net}.  That server will redirect your client
-to a random server on the network, such as @code{zelazny.freenode.net}.
-
-@cindex channel name
-@cindex # starts a channel name
-Once you're connected, you can send messages to all other users
-connected to the same network, and you can join all channels on the same
-network.  You might join the @code{#emacs} and the @code{#rcirc}
-channels, for example.  (Typically, channel names begin with a hash
-character.)
-
-Once you have joined a channel, anything you type will be broadcast to
-all the other users on the same channel.
-
-@cindex addressing other people
-@cindex other people, addressing them
-@cindex talk to other people
-If you want to address someone specifically, for example as an answer to
-a question, it is customary to prefix the message with the nick followed
-by a colon, like this:
-
-@example
-deego: fsbot rules!
-@end example
-
-@cindex nick completion
-@cindex completion of nicks
-@kindex TAB
-Since this is so common, you can use @key{TAB} to do nick completion.
-
-@node Getting started with rcirc, , Internet Relay Chat, Basics
-@section Getting started with rcirc
-@cindex getting started
-@cindex connecting to a server
-
-@cindex irc command
-Use the command @kbd{M-x irc} to connect using the defaults.
-@xref{Configuration}, if you want to change the defaults.
-
-Use @kbd{C-u M-x irc} if you don't want to use the defaults, eg. if you
-want to connect to a different network, or connect to the same network
-using a different nick.  This will prompt you for four things:
-
-@table @asis
-@cindex server, connecting
-@cindex Freenode network
-@item IRC server
-What server do you want to connect to? All the servers in a particular
-network are equivalent.  Some networks use a round-robin system where a
-single server redirects new connections to a random server in the
-network.  @code{irc.freenode.net} is such a server for the Freenode
-network.  Freenode provides the network ``for the Free and Open Source
-Software communities, for not-for-profit organisations and for related
-communities and organizations.''
-
-@cindex port, connecting
-@cindex 6667, default IRC port
-@item IRC port
-All network connections require a port.  Just as web servers and clients
-use port 80 per default, IRC uses port 6667 per default.  You rarely
-have to use a different port.
-
-@cindex nick, connecting
-@cindex changing nick
-@cindex name changes
-@item IRC nick
-@vindex user-login-name
-Every users needs a handle on-line.  You will automatically be assigned
-a slightly different nick if your chosen nick is already in use.  If
-your @code{user-login-name} is @code{alex}, and this nick is already
-in use, you might for example get assigned the nick @code{alex`}.
-
-@cindex channels, connecting
-@cindex initial channels
-@cindex startup channels
-@item Channels
-A space separated list of channels you want to join when connecting.
-You don't need to join any channels, if you just want to have one-to-one
-conversations with friends on the same network.  If you're new to the
-Freenode network, join @code{#emacs}, the channel about all things
-Emacs, or join @code{#rcirc}, the channel about @code{rcirc}.
-@end table
-
-@cindex server buffer
-When you have answered these questions, @code{rcirc} will create a server
-buffer, which will be named something like @code{*irc.freenode.net*},
-and a channel buffer for each of the channels you wanted to join.
-
-@kindex RET
-@cindex talking
-@cindex communicating
-To talk in a channel, just type in what you want to say in a channel
-buffer, and press @key{RET}.
-
-@kindex C-c C-c
-@cindex multiline messages
-@cindex messages, multiple lines
-@cindex pasting multiple lines
-@cindex edit message before sending
-If you want to paste multiple lines, such as source code, you can use
-@kbd{C-c C-c} to edit your message in a separate buffer.  Use @kbd{C-c
-C-c} to finish editing.  You still need to press @key{RET} to send it,
-though.  Generally, IRC users don't like people pasting more than around
-four lines of code, so use with care.
-
-@node Reference, Hacking and Tweaking, Basics, Top
-@chapter Reference
-@cindex reference
-
-This is the reference section of the manual.  It is not complete.  For
-complete listings of @code{rcirc} features, use Emacs built-in
-documentation.
-
-@menu
-* rcirc commands::
-* Useful IRC commands::
-* Configuration::
-@end menu
-
-@node rcirc commands, Useful IRC commands, Reference, Reference
-@section rcirc commands
-@cindex rcirc commands
-@cindex commands
-
-@kindex C-h m
-This is a list of commands that you may use in @code{rcirc}.  It is not
-complete.  For a complete listing, press @kbd{C-h m} in an @code{rcirc}
-buffer.
-
-In addition to using regular Emacs key bindings, you can call them by
-typing them into an @code{rcirc} buffer.
-
-@cindex call commands
-@cindex typing commands
-@cindex commands
-For instance, instead of using the command @kbd{C-c C-j} to join a new
-channel, you may type this in an @code{rcirc} buffer, and press @key{RET}:
-
-@example
-/join #emacs
-@end example
-
-@cindex / starts a command
-@cindex messages starting with a slash disappear
-@cindex disappearing messages if starting with a slash
-@cindex slash hides message
-This is why you cannot start a message with a slash.  You will have to
-precede the command with a space, or rewrite your message in order to
-send it to a channel.
-
-@cindex multiple words as parameters
-@cindex string delimiters
-@cindex quotes
-@cindex double-quotes
-Many commands take parameters.  IRC commands usually ignore string
-delimiters.  Neither quote nor double-quote have special meanings in
-IRC.
-
-@example
-/nick "alex schroeder"
-@end example
-
-This will try to change your nick to @code{"alex}.  Usually this will
-fail because the double quote character is not a legal character for
-nicks.
-
-@cindex case insensitive commands
-These commands are case insensitive.
-
-@cindex new command
-@cindex unknown command
-@cindex command unknown
-If a command isn't known by @code{rcirc}, it will simply be sent along to the
-server.  There is a list of some useful commands like that in the next
-section.
-
-@table @kbd
-@item C-c C-j
-@kindex C-c C-j
-@cindex /join
-@cindex join channels
-@cindex other channels
-@cindex rooms, joining
-@cindex discussion, joining
-This joins a channel such as @code{#rcirc} or @code{#emacs}.  On most
-networks, anybody can create new channels.  If you want to talk with
-some friends, for example, all you have to do is agree on a valid
-channel name and join that channel.  (Also @code{/join #emacs}.)
-
-@item C-c C-p
-@kindex C-c C-p
-@cindex /part
-@cindex part a channel
-@cindex leave a channel
-@cindex disconnect from a channel
-@cindex stop talking on a channel
-@cindex kill channel buffer
-This leaves the current channel.  You can optionally provide a reason
-for parting.  When you kill a channel buffer, you automatically part the
-corresponding channel.  (Also @code{/part you are too weird!}.)
-
-@item C-c C-r
-@kindex C-c C-r
-@cindex /nick
-@cindex change name
-@cindex nick changing
-@cindex rename yourself
-@cindex other name
-This changes your nick to some other name.  Your nick must be unique
-across the network.  Most networks don't allow too many nick changes in
-quick succession, and have restrictions on the valid characters in nick
-names.  (Also @code{/nick alex-test})
-
-@item C-c C-w
-@kindex C-c C-w
-@cindex /whois
-@cindex who are these people
-@cindex identifying people
-@cindex channels other people are on
-@cindex what channels people are on
-Gives you some basic information about a nick.  This often includes what
-other channels people are on.  (Also @code{/whois fsbot}.)
-
-@item C-c C-q
-@kindex C-c C-q
-@cindex /query
-@cindex starting a private conversation
-@cindex one-to-one conversation
-@cindex talk privately
-@cindex private conversation
-@cindex contact one person only
-@cindex query a person
-Starts a one-to-one conversation with another person on the same
-network.  A new buffer will be created for this conversation.  It works
-like a channel with only two members.  (Also @code{/query fsbot}.)
-
-@item C-c @key{RET}
-@kindex C-c RET
-@cindex /msg
-@cindex single message
-@cindex message sending
-This sends a single message to a nick.  Like with @kbd{C-c C-q}, a new
-buffer is created, where the response from the other party will show
-up.  (Also @code{/msg nickserv identify secret}.)
-
-@item C-c C-x
-@kindex C-c C-x
-@cindex /quit
-@cindex quit
-@cindex disconnect
-@cindex kill connection
-@cindex connection end
-@cindex part all channels
-@cindex end connection
-@cindex server buffer killing
-@cindex reason for quitting
-This disconnects from the server and parts all channels.  You can
-optionally provide a reason for quitting.  When you kill the server
-buffer, you automatically quit the server and part all channels.  (Also
-@code{/quit ZZZzzz...}.)
-@end table
-
-Some commands may not have a key binding, but only be available as typed
-commands, such as:
-
-@table @code
-@item /ignore
-@cindex /ignore
-@cindex ignoring other people
-@cindex trolls, ignoring
-@cindex hide some posts
-@cindex idiots online
-This command toggles the ignore status of a nick, if you provide one.
-If you don't provide a nick, the command lists all the nicks you are
-ignoring.  All messages by ignored nicks are---you guessed it---ignored.
-Since only ``operators'' can kick people from channels, the
-ignore command is often the only way to deal with some of the more
-obnoxious fellows online.  Example: @code{/ignore xah}.
-@end table
-
-@node Useful IRC commands, Configuration, rcirc commands, Reference
-@section Useful IRC commands
-@cindex irc commands
-@cindex commands
-
-As mentioned, if a command isn't known by @code{rcirc}, it will simply be sent
-along to the server.  Some such commands are available on nearly all IRC
-servers, such as:
-
-@table @code
-@item /away
-@cindex /away
-@cindex away status
-@cindex pause status
-@cindex unavailable status
-@cindex set away status
-This sets your status as ``being away'' if you provide a reason, or sets
-your status as ``being back'' if you do not.  People can use the
-@kbd{C-c C-w} command to check your status.  Example: @code{/away food}.
-@end table
-
-@cindex irc resources
-@cindex help about irc
-Typical IRC servers implement many more commands.  You can read more
-about the fantastic world of IRC online at
-@uref{http://www.irchelp.org/, the Internet Relay Chat (IRC) help
-archive}.
-
-@node Configuration, , Useful IRC commands, Reference
-@section Configuration
-@cindex configuring rcirc
-
-These are some variables you can change to configure @code{rcirc} to your
-liking.
-
-@table @code
-@item rcirc-default-server
-@vindex rcirc-default-server
-the default server to connect to.
-
-@item rcirc-default-port
-@vindex rcirc-default-port
-the default port to connect to.
-
-@item rcirc-default-nick
-@vindex rcirc-default-nick
-the default nick to use.
-@end table
-
-@example
-(setq rcirc-default-server "irc.mozilla.org"
-      rcirc-default-port 6666
-      rcirc-default-nick "alx")
-@end example
-
-@vindex rcirc-default-user-full-name
-@cindex full name
-@cindex real name
-@cindex surname
-@code{rcirc-default-user-full-name} is used to set your ``real name'' on
-IRC.  It defaults to @code{user-full-name}.  If you want to hide your
-full name, you might want to set it to some pseudonym.
-
-@example
-(setq rcirc-default-user-full-name "Curious Minds Want To Know")
-@end example
-
-@vindex rcirc-startup-channels-alist
-@cindex channels, configuration
-@cindex initial channels, configuration
-@cindex startup channels, configuration
-@code{rcirc-startup-channels-alist} is the alist of channels to join
-when connecting to a particular network.  An alist is a list of lists.
-Each sublist starts with a regular expression that is compared to the
-server address you're connecting to.  The remaining sublist items are
-the channels to join.
-
-@example
-(setq rcirc-startup-channels-alist
-      '(("\\.freenode\\.net$" "#emacs" "#rcirc" "#wiki")))
-@end example
-
-Note the subtle problem, here --- IRC clients connect to servers, and
-there is no way of knowing which servers belong to a particular network.
-In the example above we're exploiting a naming convention used by within
-the Freenode network --- all servers within the network have a host in
-the @code{freenode.net} domain.
-
-@vindex rcirc-authinfo
-@cindex authentification
-@cindex identification
-@cindex nickserv
-@cindex login
-@code{rcirc-authinfo} is an alist used to automatically identify
-yourself on networks.  Each sublist starts with a regular expression
-that is compared to the server address you're connecting to.  The second
-element in the list is a symbol representing the method to use, followed
-by the arguments this method requires.
-
-Here is an example to illustrate how you would set it:
-
-@example
-(setq rcirc-authinfo
-      '(("freenode" nickserv "bob" "p455w0rd")
-        ("freenode" chanserv "bob" "#bobland" "passwd99")
-        ("bitlbee" bitlbee "robert" "sekrit")))
-@end example
-
-And here are the valid method symbols and the arguments they require:
-
-@table @code
-@item nickserv
-@cindex nickserv authentification
-Use this symbol if you need to identify yourself as follows when
-connecting to a network: @code{/msg nickserv identify secret}.  The
-necessary arguments are the nickname you want to use this for, and the
-password to use.
-
-Before you can use this method, you will have to register your nick and
-pick a password for it.  Contact @code{nickserv} and check out the
-details.  (Using @code{/msg nickserv help}, for example.)
-
-@item chanserv
-@cindex chanserv authentification
-Use this symbol if you need to identify yourself as follows if you want
-to join a particular channel: @code{/msg chanserv identify #underground
-secret}.  The necessary arguments are the nickname and channel you want
-to use this for, and the password to use.
-
-Before you can use this method, a channel contact must tell you about
-the password to use.  Contact @code{chanserv} and check out the details.
-(Using @code{/msg chanserv help}, for example.)
-
-@item bitlbee
-@cindex bitlbee authentification
-Use this symbol if you need to identify yourself in the Bitlbee channel
-as follows: @code{identify secret}.  The necessary arguments are the
-nickname you want to use this for, and the password to use.
-
-@cindex gateway to other IM services
-@cindex instant messaging, other services
-@cindex Jabber
-@cindex AIM
-@cindex ICQ
-@cindex MSN
-@cindex Yahoo!
-Bitlbee acts like an IRC server, but in fact it is a gateway to a lot of
-other instant messaging services.  You can either install Bitlbee
-locally or use a public Bitlbee server.  There, you need to create an
-account with a password.  This is the nick and password you need to
-provide for the bitlbee authentification method.
-
-Later, you will tell Bitlbee about your accounts and passwords on all
-the other instant messaging services, and Bitlbee will log you in.  All
-@code{rcirc} needs to know, is the login to your Bitlbee account.  Don't
-confuse the Bitlbee account with all the other accounts.
-@end table
-
-@kindex C-c C-SPC
-@vindex rcirc-track-minor-mode
-@cindex switching channels
-@cindex tracking activity
-@cindex active channel
-@cindex abbreviated channel names
-@cindex modeline tracks activity
-Most people want a notification when something is said on a channel they
-have joined, particularly if they have been addressed directly.  There
-is a global minor mode that will do this kind of tracking for you.  All
-you need to do is switch it on using @kbd{M-x rcirc-track-minor-mode}.
-To make this permanent, add the following to your init file:
-
-@example
-(rcirc-track-minor-mode 1)
-@end example
-
-When other people say things in buffers that are currently buried (no
-window is showing them), the mode line will now show you the abbreviated
-channel or nick name.  Use @kbd{C-c C-@key{SPC}} to switch to these
-buffers.
-
-@vindex rcirc-mode-hook
-If you prefer not to load @code{rcirc} immediately, you can delay the
-activation of this mode:
-
-@example
-(add-hook 'rcirc-mode-hook
-          (lambda ()
-            (rcirc-track-minor-mode 1)))
-@end example
-
-@node Hacking and Tweaking, GNU Free Documentation License, Reference, Top
-@chapter Hacking and Tweaking
-@cindex hacking and tweaking
-
-Here are some examples of stuff you can do to configure @code{rcirc}.
-
-@menu
-* Skipping /away messages using handlers::
-* Using fly spell mode::
-* Scrolling conservatively::
-* Changing the time stamp format::
-* Defining a new command::
-* Reconnecting after you have lost the connection::
-@end menu
-
-@node Skipping /away messages using handlers, Using fly spell mode, Hacking and Tweaking, Hacking and Tweaking
-@section Skipping @code{/away} messages using handlers
-@cindex /away messages
-
-@cindex handlers
-@cindex status codes
-The IRC protocol specifies how certain events are signaled from server
-to client.  These events have numbers and are dealt with using so-called
-handlers.  You can override existing handlers by exploiting the naming
-convention adopted for @code{rcirc}.
-
-Here's how to stop @code{rcirc} from printing @code{/away} messages.
-Since @code{rcirc} doesn't define a 301 handler, you don't need to
-require @code{rcirc} before defining the handler:
-
-@example
-(defun rcirc-handler-301 (process cmd sender args)
-  "/away message handler.")
-@end example
-
-@node Using fly spell mode, Scrolling conservatively, Skipping /away messages using handlers, Hacking and Tweaking
-@section Using fly spell mode
-@cindex fly spell
-@cindex spelling
-@cindex spell-checking as you type
-@cindex automatic spelling
-@vindex rcirc-mode-hook
-
-The following code activates Fly Spell Mode
-for @code{rcirc} buffers:
-
-@example
-(add-hook 'rcirc-mode-hook (lambda ()
-                             (flyspell-mode 1)))
-@end example
-
-@xref{Spelling, , Flyspell mode, emacs, The GNU Emacs Manual},
-for details.
-
-@node Scrolling conservatively, Changing the time stamp format, Using fly spell mode, Hacking and Tweaking
-@section Scrolling conservatively
-@cindex input line
-@cindex scrolling
-@vindex scroll-conservatively
-@vindex rcirc-mode-hook
-
-IRC buffers are constantly growing.  If you want to see as much as
-possible at all times, you would want the prompt at the bottom of the
-window when possible.  The following snippet uses a local value for
-@code{scroll-conservatively} to achieve this:
-
-@example
-(add-hook 'rcirc-mode-hook
-          (lambda ()
-            (set (make-local-variable 'scroll-conservatively)
-                 8192)))
-@end example
-
-@xref{Scrolling, , Scrolling conservatively, emacs, The GNU Emacs
-Manual}, for details.
-
-@node Changing the time stamp format, Defining a new command, Scrolling conservatively, Hacking and Tweaking
-@section Changing the time stamp format
-@cindex time stamp
-@cindex date time
-@cindex format time stamp
-@vindex rcirc-time-format
-
-@code{rcirc-time-format} is the format used for the time stamp.  Here's
-how to include the date in the time stamp:
-
-@example
-(setq rcirc-time-format "%Y-%m-%d %H:%M ")
-@end example
-
-@node Defining a new command, Reconnecting after you have lost the connection, Changing the time stamp format, Hacking and Tweaking
-@section Defining a new command
-@cindex defining commands
-@cindex commands, defining
-@cindex new commands, defining
-
-Here's a simple new command, @code{/sv}.  With it, you can boast about
-your IRC client.  It shows how you can use @code{defun-rcirc-command} to
-define new commands.
-
-We're waiting for the definition of this command until @code{rcirc} is loaded
-because @code{defun-rcirc-command} is not yet available, and without
-@code{rcirc} loaded, the command wouldn't do us much good anyway.
-
-@smallexample
-(eval-after-load 'rcirc
-  '(defun-rcirc-command sv (arg)
-     "Boast about rcirc."
-     (interactive "i")
-     (rcirc-send-message process target
-                         (concat "I use " rcirc-id-string))))
-@end smallexample
-
-@node Reconnecting after you have lost the connection, , Defining a new command, Hacking and Tweaking
-@section Reconnecting after you have lost the connection
-@cindex reconnecting
-@cindex disconnecting servers, reconnecting
-
-If you're chatting from a laptop, then you might be familiar with this
-problem: When your laptop falls asleep and wakes up later, your IRC
-client doesn't realise that it has been disconnected.  It takes several
-minutes until the client decides that the connection has in fact been
-lost.  The simple solution is to use @kbd{M-x rcirc}.  The problem is
-that this opens an @emph{additional} connection, so you'll have two
-copies of every channel buffer --- one dead and one live.
-
-The real answer, therefore, is a @code{/reconnect} command:
-
-@smallexample
-(eval-after-load 'rcirc
-  '(defun-rcirc-command reconnect (arg)
-     "Reconnect the server process."
-     (interactive "i")
-     (unless process
-       (error "There's no process for this target"))
-     (let* ((server (car (process-contact process)))
-            (port (process-contact process :service))
-            (nick (rcirc-nick process))
-            channels query-buffers)
-       (dolist (buf (buffer-list))
-         (with-current-buffer buf
-           (when (eq process (rcirc-buffer-process))
-             (remove-hook 'change-major-mode-hook
-                          'rcirc-change-major-mode-hook)
-             (if (rcirc-channel-p rcirc-target)
-                 (setq channels (cons rcirc-target channels))
-               (setq query-buffers (cons buf query-buffers))))))
-       (delete-process process)
-       (rcirc-connect server port nick
-                      rcirc-default-user-name
-                      rcirc-default-user-full-name
-                      channels))))
-@end smallexample
-
-@node GNU Free Documentation License, Key Index, Hacking and Tweaking, Top
-@appendix GNU Free Documentation License
-@include doclicense.texi
-
-
-@node Key Index, Variable Index, GNU Free Documentation License, Top
-@unnumbered Key Index
-@printindex ky
-
-@node Variable Index, Index, Key Index, Top
-@unnumbered Variable Index
-@printindex vr
-
-@node Index, , Variable Index, Top
-@unnumbered Index
-@printindex cp
-
-@bye
-
-@ignore
-   arch-tag: 2589e562-3843-4ffc-8c2f-477cbad57c01
-@end ignore