Mercurial > emacs
changeset 616:3c1ffcac443f
Initial revision
| author | Jim Blandy <jimb@redhat.com> |
|---|---|
| date | Sun, 19 Apr 1992 08:53:10 +0000 |
| parents | e2b34caa2da8 |
| children | cde1f15848c6 |
| files | lib-src/Makefile.in make-dist src/epaths.in |
| diffstat | 3 files changed, 410 insertions(+), 0 deletions(-) [+] |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/lib-src/Makefile.in Sun Apr 19 08:53:10 1992 +0000 @@ -0,0 +1,194 @@ +# DIST: This is the distribution Makefile for Emacs. configure can +# DIST: make most of the changes to this file you might want, so try +# DIST: that first. + +# add -DUSG for SysV movemail and timer +# For Xenix, add the following for movemail: +# LOADLIBES= -lx +# For Mips, the following is needed for who knows what. +# LOADLIBES = -lmld /usr/bsd43/usr/lib/libc.a + +# Avoid trouble on systems where the `SHELL' variable might be +# inherited from the environment. +SHELL = /bin/sh + +# Allow the user to specify the install program. +INSTALL = install +INSTALLFLAGS = + +# Things that a user might actually run +INSTALLABLES = etags ctags emacsclient b2m + +# Things that Emacs runs internally, or during the build process. +UTILITIES= test-distrib wakeup make-docfile digest-doc sorted-doc \ + movemail cvtmail fakemail yow env emacsserver hexl timer + +EXECUTABLES= ${UTILITIES} ${INSTALLABLES} + +# These things are edited by ../configure; don't change anything before +# or including the '='; everything after that gets blown away. +CC=gcc +CFLAGS= -g -O +LOADLIBES= + +all: ../arch-lib + +../arch-lib: ${EXECUTABLES} + for file in ${EXECUTABLES} ; do \ + if [ -f $${file} ]; then \ + if [ -f ../arch-lib/$${file} ]; then \ + rm ../arch-lib/$${file} ; \ + fi ; \ + ln $${file} ../arch-lib ; \ + fi ; \ + done + +# We don't need to install `wakeup' explicitly, because it will be copied when +# this whole directory is copied. +install: all + ${INSTALL} ${INSTALLFLAGS} -c emacsclient ${BINDIR}/emacsclient + ${INSTALL} ${INSTALLFLAGS} -c etags ${BINDIR}/etags + ${INSTALL} ${INSTALLFLAGS} -c ctags ${BINDIR}/ctags + ${INSTALL} ${INSTALLFLAGS} -c b2m ${BINDIR}/b2m + ${INSTALL} ${INSTALLFLAGS} -c -m 444 emacs.1 ${MANDIR}/emacs.${MANEXT} + +install.sysv: all + -cp emacsclient ${BINDIR}/emacsclient.new + -chmod 755 ${BINDIR}/emacsclient.new + -chgrp bin ${BINDIR}/emacsclient.new + -chown bin ${BINDIR}/emacsclient.new + -mv ${BINDIR}/emacsclient.new ${BINDIR}/emacsclient + -cp etags ${BINDIR}/etags.new + -chmod 755 ${BINDIR}/etags.new + -chgrp bin ${BINDIR}/etags.new + -chown bin ${BINDIR}/etags.new + -mv ${BINDIR}/etags.new ${BINDIR}/etags + -cp ctags ${BINDIR}/ctags.new + -chmod 755 ${BINDIR}/ctags.new + -chgrp bin ${BINDIR}/ctags.new + -chown bin ${BINDIR}/ctags.new + -mv ${BINDIR}/ctags.new ${BINDIR}/ctags + -cp b2m ${BINDIR}/b2m.new + -chmod 755 ${BINDIR}/b2m.new + -chgrp bin ${BINDIR}/b2m.new + -chown bin ${BINDIR}/b2m.new + -mv ${BINDIR}/b2m.new ${BINDIR}/b2m + -cp emacs.1 ${MANDIR}/emacs.${MANEXT}.new + -chmod 444 ${MANDIR}/emacs.${MANEXT}.new + -mv ${MANDIR}/emacs.${MANEXT}.new ${MANDIR}/emacs.${MANEXT} + +install.xenix: + cp etags ctags emacsclient ${BINDIR} + chmod 755 ${BINDIR}/etags ${BINDIR}/ctags + chmod 755 ${BINDIR}/emacsclient + cp b2m ${BINDIR} + chmod 755 ${BINDIR}/b2m + cp emacs.1 ${MANDIR}/emacs.${MANEXT} + chmod 444 ${MANDIR}/emacs.${MANEXT} + + +clean mostlyclean: + -rm -f ${EXECUTABLES} core *.o + +distclean: + -rm -f ${EXECUTABLES} *~ \#* ../etc/DOC* core *.o + cd ../arch-lib; rm -f ${EXECUTABLES} + +realclean: distclean + rm TAGS aixcc.c + +# Test the contents of the directory. +check: + @echo "We don't have any tests for GNU Emacs yet." + +TAGS: etags + etags *.[ch] + +# This verifies that the non-ASCII characters in the file `testfile' +# have not been clobbered by whatever means were used to copy and +# distribute Emacs. If they were clobbered, all the .elc files were +# clobbered too. +test-distrib: test-distrib.c + $(CC) -o test-distrib test-distrib.c + ./test-distrib + +GETOPTOBJS = getopt.o getopt1.o +GETOPTDEPS = $(GETOPTOBJS) getopt.h +getopt.o: getopt.c getopt.h +getopt1.o: getopt1.c getopt.h + +etags: etags.c $(GETOPTDEPS) + $(CC) -o etags ${CFLAGS} -DETAGS etags.c $(GETOPTOBJS) $(LOADLIBES) + +ctags: etags.c $(GETOPTDEPS) + $(CC) -o ctags ${CFLAGS} -DCTAGS etags.c $(GETOPTOBJS) $(LOADLIBES) + +wakeup: wakeup.c + $(CC) -o wakeup ${CFLAGS} wakeup.c $(LOADLIBES) + +make-docfile: make-docfile.c + $(CC) -o make-docfile ${CFLAGS} make-docfile.c $(LOADLIBES) + +digest-doc: digest-doc.c + $(CC) -o digest-doc ${CFLAGS} digest-doc.c $(LOADLIBES) + +sorted-doc: sorted-doc.c + $(CC) -o sorted-doc ${CFLAGS} sorted-doc.c $(LOADLIBES) + +b2m: b2m.c + $(CC) -o b2m ${CFLAGS} b2m.c $(LOADLIBES) + +movemail: movemail.c ../src/config.h + $(CC) -o movemail ${CFLAGS} movemail.c $(LOADLIBES) + +cvtmail: cvtmail.c + $(CC) -o cvtmail ${CFLAGS} cvtmail.c $(LOADLIBES) + +fakemail: fakemail.c ../src/config.h + $(CC) -o fakemail ${CFLAGS} fakemail.c $(LOADLIBES) + +yow: yow.c ../src/paths.h + $(CC) -o yow ${CFLAGS} yow.c $(LOADLIBES) + +env: env.c ../src/config.h + $(CC) -o env -DEMACS ${CFLAGS} env.c $(LOADLIBES) + +emacsserver: emacsserver.c ../src/config.h + $(CC) -o emacsserver ${CFLAGS} emacsserver.c $(LOADLIBES) + +emacsclient: emacsclient.c ../src/config.h + $(CC) -o emacsclient ${CFLAGS} emacsclient.c $(LOADLIBES) + +hexl: hexl.c + $(CC) -o hexl ${CFLAGS} hexl.c $(LOADLIBES) + +timer: getdate.o timer.o + $(CC) -o timer $(CFLAGS) getdate.o timer.o + +# These are NOT included in INSTALLABLES or UTILITIES. +# See ../src/ymakefile. +emacstool: emacstool.c + $(CC) emacstool.c -o emacstool ${CFLAGS} \ + -lsuntool -lsunwindow -lpixrect $(LOADLIBES) + +# For SUN Japanese Language Environment +nemacstool: emacstool.c + $(CC) -o nemacstool -DJLE ${CFLAGS} emacstool.c \ + -lsuntool -lmle -lsunwindow -lpixrect $(LOADLIBES) + +xvetool: emacstool.c + $(CC) -o xvetool -DXVIEW ${CFLAGS} emacstool.c \ + -lxview -lX -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \ + $(LOADLIBES) + +xveterm: emacstool.c + $(CC) -o xveterm -DXVIEW -DTTERM ${CFLAGS} emacstool.c \ + -lxview -lolgx -lX -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \ + $(LOADLIBES) + +aixcc: aixcc.c + $(CC) $(CFLAGS) -o aixcc aixcc.c + +aixcc.c: aixcc.lex + lex aixcc.lex + mv lex.yy.c aixcc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/make-dist Sun Apr 19 08:53:10 1992 +0000 @@ -0,0 +1,183 @@ +#!/bin/sh +# +# make-dist: create an Emacs distribution tar file from the current +# source tree. This basically creates a duplicate directory +# structure, and then hard links into it only those files that should +# be distributed. This means that if you add a file with an odd name, +# you should make sure that this script will include it. + +progname="$0" + +# Exit if a command fails. +set -e + +# Print out each line we read, for debugging's sake. +# set -v + +cleanup=yes + +while [ $# -gt 0 ]; do + case "$1" in + "--no-cleanup" ) + cleanup=no + ;; + * ) + echo "${progname}: Unrecognized argument: $1" >&2 + exit 1 + ;; + esac + shift +done + +# Make sure we're running in the right place. +if [ ! -d src -o ! -f src/lisp.h -o ! -d lisp -o ! -f lisp/version.el ]; then + echo "${progname}: must run in the top directory of the Emacs" >&2 + echo "distribution tree. Cd to that directory and try again." >&2 + exit 1 +fi + +# Find out which version of Emacs this is. +version=`grep 'defconst[ ]*emacs-version' lisp/version.el \ + | sed -e 's/^.*"\([0-9]+\.[0-9]+\)\..*$/\1/'` +if [ ! "${version}" ]; then + echo "${progname}: can't find current emacs version in ./lisp/version.el." >&2 + exit 1 +fi + +# Make sure the subdirectory is available. +tempparent="make-dist.$$" +if [ -d ${tempparent} ]; then + echo "${progname}: staging directory ${tempparent} already exists. +Perhaps a previous invocation of ${progname} failed to clean up +after itself. Check that directories whose names are of the form +make-dist.NNNNN don't contain any important information, remove them, +and try again." >&2 + exit 1 +fi + +echo "Creating staging directory: ${tempparent}" +mkdir ${tempparent} +emacsname="emacs-${version}" +tempdir="${tempparent}/${emacsname}" + +echo "Creating top directory: ${tempdir}" +mkdir ${tempdir} + +# We copy in the top-level files before creating the subdirectories in +# hopes that this will make the top-level files appear first in the +# tar file. +echo "Copying top-level files." +ln INSTALL PROBLEMS README ${tempdir} +ln ChangeLog Makefile.in build-install.in configure make-dist ${tempdir} + +echo "Creating subdirectories." +for subdir in lisp lisp/term src src/m src/s lib-src oldXMenu \ + etc lock local-lisp arch-lib cpp info man shortnames; do + mkdir ${tempdir}/${subdir} +done + +echo "Copying lisp." +# Don't distribute =*.el files, site-init.el, or site-load.el. +(cd lisp + ln [a-zA-Z]*.el ../${tempdir}/lisp + ln [a-zA-Z]*.elc ../${tempdir}/lisp + ln [a-zA-Z]*.defns ../${tempdir}/lisp + ln ChangeLog README ../${tempdir}/lisp + cd ../${tempdir}/lisp + rm -f site-init site-init.el site-init.elc + rm -f site-load site-load.el site-load.elc) + +echo "Copying lisp/term." +# Don't distribute =*.el files. +(cd lisp/term + ln [a-zA-Z]*.el ../../${tempdir}/lisp/term + ln [a-zA-Z]*.elc ../../${tempdir}/lisp/term + ln README ../../${tempdir}/lisp/term) + +echo "Copying src." +# Don't distribute =*.[ch] files, or the configured versions of +# config.h.in, paths.h.in, or Makefile.in. +(cd src + ln [a-zA-Z]*.c ../${tempdir}/src + ln [a-zA-Z]*.h ../${tempdir}/src + ln [a-zA-Z]*.s ../${tempdir}/src + ln README Makefile.in ymakefile ChangeLog config.h.in paths.h.in \ + ../${tempdir}/src + ln .gdbinit .dbxinit ../${tempdir}/src + ln *.com *.opt vms-pp.trans vmsbuild ../${tempdir}/src + cd ../${tempdir}/src + etags *.h *.c ../lisp/*.el) + +echo "Copying src/m." +(cd src/m + ln README *.h ../../${tempdir}/src/m) + +echo "Copying src/s." +(cd src/s + ln README *.h ../../${tempdir}/src/s) + +echo "Copying lib-src." +(cd lib-src + ln [a-zA-Z]*.c [a-zA-Z]*.h [a-zA-Z]*.y [a-zA-Z]*.lex ../${tempdir}/lib-src + ln ChangeLog Makefile.in README testfile ../${tempdir}/lib-src) + +echo "Copying oldXMenu." +(cd oldXMenu + ln *.c *.h ../${tempdir}/oldXMenu + ln README Makefile Imakefile ChangeLog ../${tempdir}/oldXMenu) + +echo "Copying etc." +# Don't distribute DOC files, backups, autosaves, or tex litter. +(cd etc + ln [0-9a-zA-Z]* ../${tempdir}/etc + cd ../${tempdir}/etc + # Avoid an error when expanding the wildcards later. + for dummy in DOC-dummy dummy~ \#dummy\# dummy.dvi dummy.log; do + ln MACHINES ${dummy} + done + rm -f DOC* *~ \#*\# *.dvi *.log core) + +# For now, we comment these out, since I'm not changing them any. +#!! echo "Copying cpp." +#!! (cd cpp +#!! ln cccp.c cexp.y Makefile README ../${tempdir}/cpp) +#!! +#!! echo "Copying info." +#!! # Don't distribute backups or autosaves. +#!! (cd info +#!! ln [a-zA-Z]* ../${tempdir}/info +#!! cd ../${tempdir}/info +#!! # Avoid an error when expanding the wildcards later. +#!! ln emacs dummy~ ; ln emacs \#dummy\# +#!! rm -f *~ \#*\# core) +#!! +#!! echo "Copying man." +#!! (cd man +#!! ln *.tex *.texinfo *.texi *.aux *.cps *.fns *.kys *.vrs ../${tempdir}/man +#!! ln *.c ../${tempdir}/man +#!! ln ChangeLog Makefile README split-man ../${tempdir}/man) + +echo "Copying shortnames." +(cd shortnames + ln *.c ../${tempdir}/shortnames + ln Makefile reserved special ../${tempdir}/shortnames) + +echo "Making sure copying notices are symlinks." +if [ -f ${tempdir}/etc/COPYING ]; then + rm ${tempdir}/etc/COPYING + ln etc/COPYING ${tempdir}/etc/COPYING +fi +for subdir in lisp src lib-src info shortnames; do + if [ -f ${tempdir}/${subdir}/COPYING ]; then + rm ${tempdir}/${subdir}/COPYING + fi + ln -s ../etc/COPYING ${tempdir}/${subdir} +done + +echo "Creating tar file." +(cd ${tempparent}; tar cvf - ${emacsname}) | compress > ${emacsname}.tar.Z + +if [ "${cleanup}" = yes ]; then + echo "Cleaning up the staging directory." + rm -rf ${tempparent} +fi
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/epaths.in Sun Apr 19 08:53:10 1992 +0000 @@ -0,0 +1,33 @@ +/* Hey Emacs, this is -*- C -*- code! */ + +/* The default search path for Lisp function "load". + This sets load-path. */ +#define PATH_LOADSEARCH "/usr/local/lib/emacs/lisp" + +/* Like PATH_LOADSEARCH, but used only when Emacs is dumping. This + path is usually identical to PATH_LOADSEARCH except that the entry + for the directory containing the installed lisp files has been + replaced with ../lisp. */ +#define PATH_DUMPLOADSEARCH "../lisp" + +/* The extra search path for programs to invoke. This is appended to + whatever the PATH environment variable says to set the Lisp + variable exec-path and the first file name in it sets the Lisp + variable exec-directory. exec-directory is used for finding + executables and other architecture-dependent files. */ +#define PATH_EXEC "/usr/local/lib/emacs/etc" + +/* Where Emacs should look for its architecture-independent data + files, like the docstring file. The lisp variable data-directory + is set to this value. */ +#define PATH_DATA "/usr/local/lib/emacs/data" + +/* The name of the directory that contains lock files with which we + record what files are being modified in Emacs. This directory + should be writable by everyone. THE STRING MUST END WITH A + SLASH!!! */ +#define PATH_LOCK "/usr/local/lib/emacs/lock/" + +/* the name of the file !!!SuperLock!!! in the directory + specified by PATH_LOCK. Yes, this is redundant. */ +#define PATH_SUPERLOCK "/usr/local/lib/emacs/lock/!!!SuperLock!!!"