Mercurial > emacs

changeset 84276:4d1a7898a1ff

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Move all targets that are not the Emacs manual to misc/Makefile.in. (INFO_TARGETS, DVI_TARGETS): Reduce to just the Emacs manual. (infodir): New variable. (info): Use $infodir. (emacsman): Delete target, not needed any more. (mostlyclean): Remove `gnustmp'. (INFOSOURCES): Delete. (.SUFFIXES): Use $(TEXI2DVI) rather than texi2dvi. (mostlyclean): Add *.op, *.ops. Move *.aux *.cps *.fns *.kys *.pgs
author Glenn Morris <rgm@gnu.org>
date Thu, 06 Sep 2007 04:51:52 +0000
parents 89ef17e17e61
children 4c63b44179d0
files doc/emacs/Makefile.in
diffstat 1 files changed, 22 insertions(+), 231 deletions(-) [+]
line wrap: on
line diff
--- a/doc/emacs/Makefile.in	Thu Sep 06 04:50:28 2007 +0000
+++ b/doc/emacs/Makefile.in	Thu Sep 06 04:51:52 2007 +0000
@@ -1,4 +1,4 @@
-#### Makefile for the Emacs Manual and other documentation.
+#### Makefile for the Emacs Manual
 
 # Copyright (C) 1994, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
 #   2004, 2005, 2006, 2007 Free Software Foundation, Inc.
@@ -29,38 +29,28 @@
 # Tell make where to find source files; this is needed for the makefiles.
 VPATH=@srcdir@
 
+## Where the output files go.
+## Note that the setfilename command in the .texi files assumes this.
+infodir=../../info
 
 # The makeinfo program is part of the Texinfo distribution.
 # Use --force so that it generates output even if there are errors.
 MAKEINFO = makeinfo --force
-INFO_TARGETS = ../info/emacs ../info/ccmode ../info/cl \
-	        ../info/dired-x ../info/ediff ../info/forms ../info/gnus \
-		../info/message ../info/sieve ../info/pgg ../info/emacs-mime \
-		../info/info ../info/mh-e ../info/reftex \
-		../info/sc ../info/vip ../info/viper ../info/widget \
-		../info/efaq ../info/ada-mode ../info/autotype ../info/calc \
-		../info/idlwave ../info/eudc ../info/ebrowse ../info/pcl-cvs \
-		../info/woman ../info/eshell ../info/org ../info/url \
-		../info/speedbar ../info/tramp ../info/ses ../info/smtpmail \
-		../info/flymake ../info/newsticker ../info/rcirc ../info/erc
-DVI_TARGETS = 	emacs.dvi calc.dvi cc-mode.dvi cl.dvi dired-x.dvi \
-		 ediff.dvi forms.dvi gnus.dvi message.dvi emacs-mime.dvi \
-                 gnus.dvi message.dvi sieve.dvi pgg.dvi mh-e.dvi \
-		 reftex.dvi sc.dvi vip.dvi viper.dvi widget.dvi faq.dvi \
-		 ada-mode.dvi autotype.dvi idlwave.dvi eudc.dvi ebrowse.dvi \
-		 pcl-cvs.dvi woman.dvi eshell.dvi org.dvi url.dvi \
-		 speedbar.dvi tramp.dvi ses.dvi smtpmail.dvi flymake.dvi \
-                 newsticker.dvi emacs-xtra.dvi rcirc.dvi erc.dvi
-INFOSOURCES = info.texi
+
+INFO_TARGETS = $(infodir)/emacs
+DVI_TARGETS  = emacs.dvi
+
+
+TEXI2DVI = texi2dvi
 
 # The following rule does not work with all versions of `make'.
 .SUFFIXES: .texi .dvi
 .texi.dvi:
-	texi2dvi $<
+	$(TEXI2DVI) $<
 
-TEXI2DVI = texi2dvi
 ENVADD = TEXINPUTS="$(srcdir):$(TEXINPUTS)" MAKEINFO="$(MAKEINFO) -I$(srcdir)"
 
+
 EMACS_XTRA=\
 	$(srcdir)/arevert-xtra.texi \
 	$(srcdir)/cal-xtra.texi \
@@ -120,9 +110,9 @@
 	${srcdir}/kmacro.texi \
 	$(EMACS_XTRA)
 
-info: $(top_srcdir)/info $(INFO_TARGETS)
+info: $(infodir) $(INFO_TARGETS)
 
-$(top_srcdir)/info:
+$(infodir):
 	mkdir $@
 
 dvi: $(DVI_TARGETS)
@@ -132,232 +122,30 @@
 # to exist in the build directory.
 # In a distribution of Emacs, the Info files should be up to date.
 
-# The following target uses an explicit -o switch to work around
-# the @setfilename directive in info.texi, which is required for
-# the Texinfo distribution.
+emacs : $(infodir)/emacs
 
-../info/info: ${INFOSOURCES}
-	cd $(srcdir); $(MAKEINFO) --no-split info.texi -o $@
-
-info.dvi: ${INFOSOURCES}
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/info.texi
-
-../info/emacs: ${EMACSSOURCES}
+$(infodir)/emacs: ${EMACSSOURCES}
 	cd $(srcdir); $(MAKEINFO) emacs.texi
 
 emacs.dvi: ${EMACSSOURCES}
 	$(ENVADD) $(TEXI2DVI) ${srcdir}/emacs.texi
 
-# This target is here so you could easily get the list of the *.texi
-# files which belong to the Emacs manual (as opposed to the separate
-# manuals for CL, CC Mode, Ebrowse, etc.).  With this target, you can
-# say things like "grep foo `make emacsman`".
-emacsman:
-	@echo $(EMACSSOURCES)
-
-../info/ccmode: cc-mode.texi
-	cd $(srcdir); $(MAKEINFO) cc-mode.texi
-cc-mode.dvi: cc-mode.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/cc-mode.texi
-
-../info/ada-mode: ada-mode.texi
-	cd $(srcdir); $(MAKEINFO) ada-mode.texi
-ada-mode.dvi: ada-mode.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/ada-mode.texi
-
-../info/pcl-cvs: pcl-cvs.texi
-	cd $(srcdir); $(MAKEINFO) pcl-cvs.texi
-pcl-cvs.dvi: pcl-cvs.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/pcl-cvs.texi
-
-../info/eshell: eshell.texi
-	cd $(srcdir); $(MAKEINFO) eshell.texi
-eshell.dvi: eshell.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/eshell.texi
-
-../info/cl: cl.texi
-	cd $(srcdir); $(MAKEINFO) cl.texi
-cl.dvi: cl.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/cl.texi
-
-../info/dired-x: dired-x.texi
-	cd $(srcdir); $(MAKEINFO) dired-x.texi
-dired-x.dvi: dired-x.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/dired-x.texi
-
-../info/ediff: ediff.texi
-	cd $(srcdir); $(MAKEINFO) ediff.texi
-ediff.dvi: ediff.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/ediff.texi
 
 emacs-xtra.dvi: emacs-xtra.texi $(EMACS_XTRA)
 	$(ENVADD) $(TEXI2DVI) ${srcdir}/emacs-xtra.texi
 
-../info/forms: forms.texi
-	cd $(srcdir); $(MAKEINFO) forms.texi
-forms.dvi: forms.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/forms.texi
-
-# gnus/message/emacs-mime/sieve/pgg are part of Gnus:
-../info/gnus: gnus.texi gnus-faq.texi
-	cd $(srcdir); $(MAKEINFO) gnus.texi
-gnus.dvi: gnus.texi gnus-faq.texi
-	sed -e '/@iflatex/,/@end iflatex/d' ${srcdir}/gnus.texi > gnustmp.texi
-	$(ENVADD) $(TEXI2DVI) gnustmp.texi
-	cp gnustmp.dvi $*.dvi
-	rm gnustmp.*
-
-../info/message: message.texi
-	cd $(srcdir); $(MAKEINFO) message.texi
-message.dvi: message.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/message.texi
-
-../info/sieve: sieve.texi
-	cd $(srcdir); $(MAKEINFO) sieve.texi
-sieve.dvi: sieve.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/sieve.texi
-
-../info/emacs-mime: emacs-mime.texi
-	cd $(srcdir); $(MAKEINFO) --enable-encoding emacs-mime.texi
-emacs-mime.dvi: emacs-mime.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/emacs-mime.texi
-
-../info/pgg: pgg.texi
-	cd $(srcdir); $(MAKEINFO) pgg.texi
-pgg.dvi: pgg.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/pgg.texi
-
-../info/mh-e: mh-e.texi
-	cd $(srcdir); $(MAKEINFO) mh-e.texi
-mh-e.dvi: mh-e.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/mh-e.texi
-
-../info/reftex: reftex.texi
-	cd $(srcdir); $(MAKEINFO) reftex.texi
-reftex.dvi: reftex.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/reftex.texi
-
-../info/sc: sc.texi
-	cd $(srcdir); $(MAKEINFO) sc.texi
-sc.dvi: sc.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/sc.texi
-
-../info/vip: vip.texi
-	cd $(srcdir); $(MAKEINFO) vip.texi
-vip.dvi: vip.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/vip.texi
-
-../info/viper: viper.texi
-	cd $(srcdir); $(MAKEINFO) viper.texi
-viper.dvi: viper.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/viper.texi
-
-../info/widget: widget.texi
-	cd $(srcdir); $(MAKEINFO) widget.texi
-widget.dvi: widget.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/widget.texi
-
-../info/efaq: faq.texi
-	cd $(srcdir); $(MAKEINFO) faq.texi
-faq.dvi: faq.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/faq.texi
-
-../etc/GNU: gnu1.texi gnu.texi
-	cd $(srcdir) && makeinfo --no-headers -o ../etc/GNU gnu1.texi
-
-../info/autotype: autotype.texi
-	cd $(srcdir); $(MAKEINFO) autotype.texi
-autotype.dvi: autotype.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/autotype.texi
-
-../info/calc: calc.texi
-	cd $(srcdir); $(MAKEINFO) calc.texi
-
-calc.dvi: calc.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/calc.texi
-
-# This is produced with --no-split to avoid making files whose
-# names clash on DOS 8+3 filesystems
-../info/idlwave: idlwave.texi
-	cd $(srcdir); $(MAKEINFO) --no-split idlwave.texi
-idlwave.dvi: idlwave.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/idlwave.texi
-
-../info/eudc: eudc.texi
-	cd $(srcdir); $(MAKEINFO) eudc.texi
-eudc.dvi: eudc.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/eudc.texi
-
-../info/ebrowse: ebrowse.texi
-	cd $(srcdir); $(MAKEINFO) ebrowse.texi
-ebrowse.dvi: ebrowse.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/ebrowse.texi
-
-../info/woman: woman.texi
-	cd $(srcdir); $(MAKEINFO) woman.texi
-woman.dvi: woman.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/woman.texi
-
-../info/org: org.texi
-	cd $(srcdir); $(MAKEINFO) org.texi
-org.dvi: org.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/org.texi
-
-../info/url: url.texi
-	cd $(srcdir); $(MAKEINFO) url.texi
-url.dvi: url.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/url.texi
-
-../info/speedbar: speedbar.texi
-	cd $(srcdir); $(MAKEINFO) speedbar.texi
-speedbar.dvi: speedbar.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/speedbar.texi
-
-../info/tramp: tramp.texi trampver.texi
-	cd $(srcdir); $(MAKEINFO) -D emacs tramp.texi
-tramp.dvi: tramp.texi trampver.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/tramp.texi
-
-../info/ses: ses.texi
-	cd $(srcdir); $(MAKEINFO) ses.texi
-ses.dvi: ses.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/ses.texi
-
-../info/smtpmail: smtpmail.texi
-	cd $(srcdir); $(MAKEINFO) smtpmail.texi
-smtpmail.dvi: smtpmail.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/smtpmail.texi
-
-../info/flymake: flymake.texi
-	cd $(srcdir); $(MAKEINFO) flymake.texi
-flymake.dvi: flymake.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/flymake.texi
-
-../info/newsticker: newsticker.texi
-	cd $(srcdir); $(MAKEINFO) newsticker.texi
-newsticker.dvi: newsticker.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/newsticker.texi
-
-../info/rcirc: rcirc.texi
-	cd $(srcdir); $(MAKEINFO) rcirc.texi
-rcirc.dvi: rcirc.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/rcirc.texi
-
-../info/erc: erc.texi
-	cd $(srcdir); $(MAKEINFO) erc.texi
-erc.dvi: erc.texi
-	$(ENVADD) $(TEXI2DVI) ${srcdir}/erc.texi
 
 mostlyclean:
-	rm -f *.log *.cp *.fn *.ky *.pg *.vr core *.tp *.core gnustmp.*
+	rm -f *.log *.cp *.fn *.ky *.op *.ops *.pg *.vr core *.tp *.core
+	rm -f *.aux *.cps *.fns *.kys *.pgs *.vrs *.toc
 
 clean: mostlyclean
 	rm -f *.dvi
 
 distclean: clean
+#	rm -f Makefile
 
 maintainer-clean: distclean
-	rm -f *.aux *.cps *.fns *.kys *.pgs *.vrs *.toc
 	for file in $(INFO_TARGETS); do rm -f $${file}*; done
 
 
@@ -366,3 +154,6 @@
 # That caused trouble because this is run entirely in the source directory.
 # Since we expect to get texi2dvi from elsewhere,
 # it is ok to expect texindex from elsewhere also.
+
+
+### Makefile ends here