Mercurial > emacs
changeset 4872:628cbf7e7005
(comint-after-partial-file-name-command):
Renamed from comint-after-partial-pathname-command.
(comint-match-partial-file-name, comint-after-partial-file-name):
Renamed from comint-match-partial-pathname, etc.
(comint-last-output-start): New variable to record
where most recent process output started from.
(comint-mode): Initialise it.
(comint-output-filter): Set it.
(comint-previous-matching-input-string): Moved to
comint-previous-matching-input-position.
(comint-previous-matching-input-string): Use it.
(comint-search-arg, comint-search-start,
comint-previous-input-string): New subroutines.
(comint-previous-input, comint-next-input,
comint-previous-matching-input, comint-next-matching-input,
comint-previous-matching-input-from-input,
comint-next-matching-input-from-input): Use them.
(comint-mode-map): Added signal menu-bar. Moved
comint-backward/forward-matching-input to output menu-bar, since
they move within the buffer rather than do input.
(comint-send-input, comint-after-pmark-p,
comint-kill-input, comint-proc-query): Removed serialisation of
obtaining the process mark's marker-position.
Commented out comint-load-hooks.
(comint-dynamic-simple-complete): New subroutine.
(comint-dynamic-complete-filename-command): New variable.
(comint-after-partial-pathname-command): New variable.
(comint-after-partial-pathname): New subroutine.
(comint-dynamic-complete): Use them.
(comint-mode): Make them local.
Renamed comint-dynamic-complete-command to
comint-dynamic-complete-command-command for consistency.
Renamed comint-file-name-addsuffix/autolist/recexact to
comint-completion-addsuffix/autolist/recexact for consistency.
(comint-replace-by-expanded-history): Check if input
ring size is not big enough for relative reference.
(comint-read-input-ring, comint-input-ring-file-name):
From shell.el.
(shell-write-input-ring): New subroutine.
(comint-file-name-prefix): New variable.
(comint-directory): New inline subroutine.
(comint-dynamic-complete-filename, comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Use it.
(comint-dynamic-complete-filename,
comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Make sure local
completion-ignore-case is nil.
(comint-next-prompt, comint-previous-prompt): Use
paragraph-start and paragraph motion commands rather than
re-search-forward and re-search-backward commands.
(comint-dynamic-list-input-ring,
comint-previous-matching-input-string): Use ring-empty-p rather
than zerop and ring-length.
(comint-input-ignoredups): New variable.
(comint-send-input, shell-read-input-ring): Use it.
(comint-mode): Make comint-input-ignoredups local. Doc fix.
(comint-scroll-to-bottom-on-input): New variable.
(comint-scroll-to-bottom-on-output): New variable.
(comint-scroll-show-maximum-output): New variable.
(comint-output-filter-hook): New variable, defaults to
comint-postoutput-scroll-to-bottom.
(comint-output-filter): Renamed from comint-filter
for consistency. Now calls comint-output-filter-hook.
(comint-preinput-scroll-to-bottom): New subroutine.
(comint-postoutput-scroll-to-bottom): New subroutine.
(comint-show-maximum-output): New command.
(comint-copy-old-input): New command.
(comint-send-input): Run comint-output-filter-hook if
necessary as a kludge to prevent messy redisplays.
(comint-mode-map): Added comint-show-maximum-output to
C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i
and menu-bar input.
(comint-mode): Make local variables
comint-scroll-to-bottom-on-input, before-change-function,
comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output,
and comint-output-filter-hook.
(comint-version): Deleted--no need for separate version.
(comint-input-ring-index): Make this a permanent local.
(comint-mode): Don't alter comint-input-ring-index or comint-input-ring
if already set meaningfully.
(comint-mode-map): Added keys M-R/S for
comint-previous/next-matching-input-from-input and to completion
menu-bar. Added comint-forward/backward-matching-input and
comint-previous/next-matching-input to completion menu-bar.
(comint-mode): Doc fix for functionality.
(comint-exec-1): Uses setenv.
(comint-update-env): Removed.
(comint-input-ring-size): Incremented to 32, as with
command history.
(comint-dynamic-list-input-ring): Check for zero
length ring. Use ring length, not ring size, when generating
list. Use buffer " *Input History*".
(comint-previous-matching-input-string): Check for zero-length ring.
Check last item in case at end of cycle and it's a match.
(comint-searching-input-ring): New subroutine.
(comint-regexp-arg): New subroutine.
(comint-previous-matching-input-from-input): New command.
(comint-next-matching-input-from-input): New command.
(comint-replace-by-expanded-history): Fix for matching
inside quotes. Fix to allow argument subrange specifiers. Fix to
identify and reject absolute input number references.
(comint-within-quotes): New subroutine.
(comint-how-many-region): New subroutine.
(comint-args): New subroutine.
(comint-delim-arg): New subroutine.
(comint-arguments): New subroutine.
(comint-delimiter-argument-list): New variable.
(comint-send-input): Inserts input arguments into ring
separated by single spaces.
(comint-filter): Checks the buffer's process to make
sure it's still there. Otherwise, set-buffer will fail.
(comint-backward-matching-input): New command.
(comint-forward-matching-input): New command.
(comint-next-prompt, comint-previous-prompt):
Error if reach beg/end of buffer.
(comint-dynamic-complete): Fix for absolute input
number references.
(comint-dynamic-complete-filename): Changed listings
function to comint-dynamic-list-filename-completions. Uses
file-directory-p rather than string-match to test for directories.
(comint-dynamic-list-completions): Changed to list the
list of completions supplied as the function argument. Use buffer
" *Completions*".
(comint-match-partial-pathname): New subroutine.
(comint-dynamic-complete-variable): New command.
(comint-dynamic-list-filename-completions): New function.
(comint-previous-input):
Don't use replace-match; just insert before deleting.
(comint-magic-space): Use self-insert command.
(comint-history-file-name): New variable.
(comint-mode): Initialize comint-input-ring before
running comint-mode-hook.
(comint-input-autoexpand): New variable.
(comint-dynamic-complete-command): New variable.
(comint-get-current-command): New variable.
(comint-read-input-ring): New function.
(comint-send-input): Handle history expansion.
(comint-input-sentinel): Doc fix.
(comint-mode-map): Added key binding for C-c C-h.
Added menu bars for completion, input and output.
(comint-dynamic-list-input-ring): New function.
(comint-previous-input-string): New subroutine.
(comint-previous-input): Use it.
(comint-previous-matching-input-string): New subroutine.
(comint-previous-matching-input): Use it.
(comint-replace-by-expanded-history): New command.
(comint-magic-space): New command.
(comint-replace-by-expanded-filename): Now replaces
expanded match for a filename, and then calls filename completion
comint-dynamic-complete-filename to do file name completion.
(comint-kill-output): Don't kill prompt.
(comint-show-output): Don't move point if it's
visible where it is, and if point is moved, put it after prompt.
(comint-dynamic-complete): Totally new definition.
(comint-dynamic-complete-filename): New name for old
function comint-dynamic-complete, completes files and lists
candidates, souped up for configurability.
(comint-dynamic-complete-variable): New command.
(comint-file-name-autolist): New variable.
(comint-file-name-addsuffix): New variable,
(comint-file-name-recexact): New variable.
| author | Richard M. Stallman <rms@gnu.org> |
|---|---|
| date | Fri, 22 Oct 1993 02:57:36 +0000 |
| parents | 30a614eb52f7 |
| children | 8ba91b53e9a5 |
| files | lisp/comint.el |
| diffstat | 1 files changed, 1217 insertions(+), 602 deletions(-) [+] |
line wrap: on
line diff
--- a/lisp/comint.el Fri Oct 22 02:53:24 1993 +0000 +++ b/lisp/comint.el Fri Oct 22 02:57:36 1993 +0000 @@ -3,6 +3,7 @@ ;; Copyright (C) 1988, 1990, 1992, 1993 Free Software Foundation, Inc. ;; Author: Olin Shivers <shivers@cs.cmu.edu> +;; Adapted-by: Simon Marshall <s.marshall@dcs.hull.ac.uk> ;; Keywords: processes ;; This file is part of GNU Emacs. @@ -23,11 +24,10 @@ ;;; Commentary: -;;; The changelog is at the end of this file. - ;;; Please send me bug reports, bug fixes, and extensions, so that I can ;;; merge them into the master source. ;;; - Olin Shivers (shivers@cs.cmu.edu) +;;; - Simon Marshall (s.marshall@dcs.hull.ac.uk) ;;; This file defines a general command-interpreter-in-a-buffer package ;;; (comint mode). The idea is that you can build specific process-in-a-buffer @@ -65,11 +65,12 @@ ;;; ;;; m-p comint-previous-input Cycle backwards in input history ;;; m-n comint-next-input Cycle forwards -;;; m-r comint-previous-matching-input Previous input matching a regexp -;;; m-s comint-next-matching-input Next input that matches +;;; m-r comint-previous-matching-input Previous input matching a regexp +;;; m-s comint-next-matching-input Next input that matches +;;; m-c-r comint-previous-input-matching Search backwards in input history ;;; return comint-send-input -;;; c-a comint-bol Beginning of line; skip prompt. -;;; c-d comint-delchar-or-maybe-eof Delete char unless at end of buff. +;;; c-a comint-bol Beginning of line; skip prompt +;;; c-d comint-delchar-or-maybe-eof Delete char unless at end of buff ;;; c-c c-u comint-kill-input ^u ;;; c-c c-w backward-kill-word ^w ;;; c-c c-c comint-interrupt-subjob ^c @@ -77,50 +78,60 @@ ;;; c-c c-\ comint-quit-subjob ^\ ;;; c-c c-o comint-kill-output Delete last batch of process output ;;; c-c c-r comint-show-output Show last batch of process output +;;; c-c c-h comint-dynamic-list-input-ring List input history ;;; -;;; Not bound by default in comint-mode +;;; Not bound by default in comint-mode (some are in shell mode) ;;; send-invisible Read a line w/o echo, and send to proc -;;; (These are bound in shell-mode) -;;; comint-dynamic-complete Complete filename at point. -;;; comint-dynamic-list-completions List completions in help buffer. +;;; comint-dynamic-complete-filename Complete filename at point. +;;; comint-dynamic-complete-variable Complete variable name at point. +;;; comint-dynamic-list-filename-completions List completions in help buffer. ;;; comint-replace-by-expanded-filename Expand and complete filename at point; ;;; replace with expanded/completed name. +;;; comint-replace-by-expanded-history Expand history at point; +;;; replace with expanded name. +;;; comint-magic-space Expand history and add (a) space(s). ;;; comint-kill-subjob No mercy. +;;; comint-show-maximum-output Show as much output as possible. ;;; comint-continue-subjob Send CONT signal to buffer's process ;;; group. Useful if you accidentally ;;; suspend your process (with C-c C-z). -;;; -;;; These used to be bound for RMS -- I prefer the input history stuff, -;;; but you might like 'em. -;;; m-P comint-msearch-input Search backwards for prompt -;;; m-N comint-psearch-input Search forwards for prompt -;;; C-cR comint-msearch-input-matching Search backwards for prompt & string ;;; comint-mode-hook is the comint mode hook. Basically for your keybindings. -;;; comint-load-hook is run after loading in this package. ;;; Code: -(defconst comint-version "2.03") - (require 'ring) ;;; Buffer Local Variables: ;;;============================================================================ ;;; Comint mode buffer local variables: -;;; comint-prompt-regexp - string comint-bol uses to match prompt. -;;; comint-last-input-start - marker Handy if inferior always echos +;;; comint-prompt-regexp - string comint-bol uses to match prompt +;;; comint-delimiter-argument-list - list For delimiters and arguments +;;; comint-last-input-start - marker Handy if inferior always echoes ;;; comint-last-input-end - marker For comint-kill-output command ;;; comint-input-ring-size - integer For the input history ;;; comint-input-ring - ring mechanism ;;; comint-input-ring-index - number ... +;;; comint-input-autoexpand - symbol ... +;;; comint-input-ignoredups - boolean ... ;;; comint-last-input-match - string ... ;;; comint-get-old-input - function Hooks for specific -;;; comint-input-sentinel - function process-in-a-buffer -;;; comint-input-filter - function modes. -;;; comint-input-send - function -;;; comint-eol-on-send - boolean -;;; comint-process-echoes - boolean +;;; comint-get-current-command - function process-in-a-buffer +;;; comint-dynamic-complete-command-command - function modes. +;;; comint-after-partial-filename-command - +;;; comint-input-sentinel - function ... +;;; comint-input-filter - function ... +;;; comint-input-send - function ... +;;; comint-eol-on-send - boolean ... +;;; comint-process-echoes - boolean ... +;;; comint-scroll-to-bottom-on-input - symbol For scroll behaviour +;;; comint-scroll-to-bottom-on-output - symbol ... +;;; comint-scroll-show-maximum-output - boolean ... +;;; +;;; Comint mode non-buffer local variables: +;;; comint-completion-addsuffix - boolean For file name completion +;;; comint-completion-autolist - boolean behaviour +;;; comint-completion-recexact - boolean ... (defvar comint-prompt-regexp "^" "Regexp to recognise prompts in the inferior process. @@ -136,33 +147,129 @@ This is a good thing to set in mode hooks.") -(defvar comint-input-ring-size 30 +(defvar comint-delimiter-argument-list () + "List of characters to recognise as separate arguments in input. +Strings comprising a character in this list will separate the arguments +surrounding them, and also be regarded as arguments in their own right (unlike +whitespace). See `comint-arguments'. +Defaults to (), the empty list. + +Good choices: + shell: \(\"|\" \"&\" \"<\" \">\" \"\(\" \")\" \";\") + +This is a good thing to set in mode hooks.") + +(defvar comint-input-autoexpand 'history + "*If non-nil, expand input command history references on completion. +This mirrors the optional behaviour of the tcsh (its autoexpand and histlit). + +If the value is `input', then the expansion is seen on input. +If the value is `history', then the expansion is only when inserting +into the buffer's input ring. See also `comint-magic-space' and +`comint-dynamic-complete'. + +This variable is buffer-local.") + +(defvar comint-input-ignoredups nil + "*If non-nil, don't add input matching the last on the input ring. +This mirrors the optional behaviour of the bash. + +This variable is buffer-local.") + +(defvar comint-input-ring-file-name nil + "*If non-nil, name of the file to read/write input history. +See also `comint-read-input-ring' and `comint-write-input-ring'. + +This variable is buffer-local, and is a good thing to set in mode hooks.") + +(defvar comint-scroll-to-bottom-on-input 'this + "*Controls whether input to interpreter causes window to scroll. +If nil, then do not scroll. If t or `all', scroll all windows showing buffer. +If `this', scroll only the selected window. + +See `comint-preinput-scroll-to-bottom'. This variable is buffer-local.") + +(defvar comint-scroll-to-bottom-on-output 'this + "*Controls whether interpreter output causes window to scroll. +If nil, then do not scroll. If t or `all', scroll all windows showing buffer. +If `this', scroll only the selected window. +If `others', scroll only those that are not the selected window. + +See variable `comint-scroll-show-maximum-output' and function +`comint-postoutput-scroll-to-bottom'. This variable is buffer-local.") + +(defvar comint-scroll-show-maximum-output t + "*Controls how interpreter output causes window to scroll. +If non-nil, then show the maximum output when the window is scrolled. + +See variable `comint-scroll-to-bottom-on-output' and function +`comint-postoutput-scroll-to-bottom'. This variable is buffer-local.") + +(defvar comint-input-ring-size 32 "Size of input history ring.") (defvar comint-process-echoes nil "*If non-nil, assume that the subprocess echoes any input. If so, delete one copy of the input so that only one copy eventually -appears in the buffer. +appears in the buffer. This variable is buffer-local.") ;;; Here are the per-interpreter hooks. (defvar comint-get-old-input (function comint-get-old-input-default) - "Function that submits old text in comint mode. + "Function that returns old text in comint mode. This function is called when return is typed while the point is in old text. It returns the text to be submitted as process input. The default is `comint-get-old-input-default', which grabs the current line, and strips off leading text matching `comint-prompt-regexp'.") +(defvar comint-filename-prefix "" + "Prefix prepended to all absolute file names taken from process input. +This is used by the completion functions, and by directory tracking in shell +mode.") + +(defvar comint-after-partial-filename-command 'comint-after-partial-filename + "Function that returns non-nil if point is after a file name. +By default this is `comint-after-partial-filename'. + +This is a good thing to set in mode hooks.") + +(defvar comint-dynamic-complete-filename-command + 'comint-dynamic-complete-filename + "Function that dynamically completes the file name at point. +By default this is `comint-dynamic-complete-filename', though an alternative is +`comint-replace-by-expanded-filename'. + +This is a good thing to set in mode hooks.") + +(defvar comint-dynamic-complete-command-command + 'comint-dynamic-complete-filename + "Function that dynamically completes the command at point. +By default this is `comint-dynamic-complete-filename'. + +This is a good thing to set in mode hooks.") + +(defvar comint-get-current-command 'comint-get-old-input-default + "Function that returns the current command including arguments. +By default this is `comint-get-old-input-default', meaning the whole line. + +This is a good thing to set in mode hooks.") + (defvar comint-input-sentinel (function ignore) "Called on each input submitted to comint mode process by `comint-send-input'. -Thus it can, for instance, track cd/pushd/popd commands issued to the csh.") +Thus it can, for instance, track cd/pushd/popd commands issued to a shell.") (defvar comint-input-filter (function (lambda (str) (not (string-match "\\`\\s *\\'" str)))) "Predicate for filtering additions to input history. -Only inputs answering true to this function are saved on the input -history list. Default is to save anything that isn't all whitespace") +Takes one argument, the input. If non-nil, the input may be saved on the input +history list. Default is to save anything that isn't all whitespace.") + +(defvar comint-output-filter-hook '(comint-postoutput-scroll-to-bottom) + "Functions to call after output is inserted into the buffer. +Possible function is `comint-postoutput-scroll-to-bottom'. + +This variable is buffer-local.") (defvar comint-input-sender (function comint-simple-send) "Function to actually send to PROCESS the STRING submitted by user. @@ -172,7 +279,7 @@ This is called from the user command `comint-send-input'.") (defvar comint-eol-on-send t - "*Non-nil means go to the end of the line before sending input to process. + "*Non-nil means go to the end of the line before sending input. See `comint-send-input'.") (defvar comint-mode-hook '() @@ -189,18 +296,23 @@ (defvar comint-mode-map nil) (defvar comint-ptyp t - "True if communications via pty; false if by pipe. Buffer local. + "Non-nil if communications via pty; false if by pipe. Buffer local. This is to work around a bug in Emacs process signalling.") -;;(defvar comint-last-input-match "" -;; "Last string searched for by comint input history search, for defaulting. -;;Buffer local variable.") - (defvar comint-input-ring nil) (defvar comint-last-input-start) (defvar comint-last-input-end) -(defvar comint-input-ring-index) +(defvar comint-input-ring-index nil + "Index of last matched history element.") +(defvar comint-matching-input-from-input-string "" + "Input previously used to match input history.") (put 'comint-input-ring 'permanent-local t) +(put 'comint-input-ring-index 'permanent-local t) +(put 'comint-input-autoexpand 'permanent-local t) +(put 'comint-output-filter-hook 'permanent-local t) +(put 'comint-scroll-to-bottom-on-input 'permanent-local t) +(put 'comint-scroll-to-bottom-on-output 'permanent-local t) +(put 'comint-scroll-show-maximum-output 'permanent-local t) (put 'comint-ptyp 'permanent-local t) (defun comint-mode () @@ -211,60 +323,89 @@ Setting variable `comint-eol-on-send' means jump to the end of the line before submitting new input. -This mode is typically customised to create Inferior Lisp mode, -Shell mode, etc. This can be done by setting the hooks -`comint-input-sentinel', `comint-input-filter', `comint-input-sender' and -`comint-get-old-input' to appropriate functions, and the variable +This mode is customised to create major modes such as Inferior Lisp +mode, Shell mode, etc. This can be done by setting the hooks +`comint-input-sentinel', `comint-input-filter', `comint-input-sender' +and `comint-get-old-input' to appropriate functions, and the variable `comint-prompt-regexp' to the appropriate regular expression. An input history is maintained of size `comint-input-ring-size', and -can be accessed with the commands \\[comint-next-input] and \\[comint-previous-input]. +can be accessed with the commands \\[comint-next-input], \\[comint-previous-input], and \\[comint-dynamic-list-input-ring]. +Input ring history expansion can be achieved with the commands +\\[comint-replace-by-expanded-history] or \\[comint-magic-space]. +Input ring expansion is controlled by the variable `comint-input-autoexpand', +and addition is controlled by the variable `comint-input-ignoredups'. + Commands with no default key bindings include `send-invisible', -`comint-dynamic-complete', and `comint-list-dynamic-completions'. +`comint-dynamic-complete', `comint-list-dynamic-completions', and +`comint-magic-space'. + +Input to, and output from, the subprocess can cause the window to scroll to +the end of the buffer. See variables `comint-output-filter-hook', +`comint-scroll-to-bottom-on-input', and `comint-scroll-to-bottom-on-output'. If you accidentally suspend your process, use \\[comint-continue-subjob] to continue it. \\{comint-mode-map} -Entry to this mode runs the hooks on comint-mode-hook" +Entry to this mode runs the hooks on `comint-mode-hook'." (interactive) - ;; Do not remove this. All major modes must do this. - (kill-all-local-variables) - (setq major-mode 'comint-mode) - (setq mode-name "Comint") - (setq mode-line-process '(": %s")) - (use-local-map comint-mode-map) - (make-local-variable 'comint-last-input-start) - (setq comint-last-input-start (make-marker)) - (make-local-variable 'comint-last-input-end) - (setq comint-last-input-end (make-marker)) -;;; (make-local-variable 'comint-last-input-match) -;;; (setq comint-last-input-match "") - (make-local-variable 'comint-prompt-regexp) ; Don't set; default - (make-local-variable 'comint-input-ring-size) ; ...to global val. - (make-local-variable 'comint-input-ring) - (make-local-variable 'comint-input-ring-index) - (setq comint-input-ring-index 0) - (make-local-variable 'comint-get-old-input) - (make-local-variable 'comint-input-sentinel) - (make-local-variable 'comint-input-filter) - (make-local-variable 'comint-input-sender) - (make-local-variable 'comint-eol-on-send) - (make-local-variable 'comint-ptyp) - (make-local-variable 'comint-exec-hook) - (make-local-variable 'comint-process-echoes) - (run-hooks 'comint-mode-hook) - (or comint-input-ring - (setq comint-input-ring (make-ring comint-input-ring-size)))) + ;; Do not remove this. All major modes must do this. + (kill-all-local-variables) + (setq major-mode 'comint-mode) + (setq mode-name "Comint") + (setq mode-line-process '(": %s")) + (use-local-map comint-mode-map) + (make-local-variable 'comint-last-input-start) + (setq comint-last-input-start (make-marker)) + (make-local-variable 'comint-last-input-end) + (setq comint-last-input-end (make-marker)) + (make-local-variable 'comint-last-output-start) + (setq comint-last-output-start (make-marker)) + (make-local-variable 'comint-prompt-regexp) ; Don't set; default + (make-local-variable 'comint-input-ring-size) ; ...to global val. + (make-local-variable 'comint-input-ring) + (make-local-variable 'comint-input-ring-file-name) + (or (and (boundp 'comint-input-ring) comint-input-ring) + (setq comint-input-ring (make-ring comint-input-ring-size))) + (make-local-variable 'comint-input-ring-index) + (or (and (boundp 'comint-input-ring-index) comint-input-ring-index) + (setq comint-input-ring-index nil)) + (make-local-variable 'comint-matching-input-from-input-string) + (make-local-variable 'comint-input-autoexpand) + (make-local-variable 'comint-input-ignoredups) + (make-local-variable 'comint-delimiter-argument-list) + (make-local-variable 'comint-after-partial-filename-command) + (make-local-variable 'comint-dynamic-complete-filename-command) + (make-local-variable 'comint-dynamic-complete-command-command) + (make-local-variable 'comint-get-current-command) + (make-local-variable 'comint-get-old-input) + (make-local-variable 'comint-input-sentinel) + (make-local-variable 'comint-input-filter) + (make-local-variable 'comint-input-sender) + (make-local-variable 'comint-eol-on-send) + (make-local-variable 'comint-scroll-to-bottom-on-input) + (make-local-variable 'comint-scroll-to-bottom-on-output) + (make-local-variable 'comint-scroll-show-maximum-output) + (make-local-variable 'before-change-function) + (setq before-change-function 'comint-preinput-scroll-to-bottom) + (make-local-variable 'comint-output-filter-hook) + (make-local-variable 'comint-ptyp) + (make-local-variable 'comint-exec-hook) + (make-local-variable 'comint-process-echoes) + (run-hooks 'comint-mode-hook)) (if comint-mode-map nil + ;; Keys: (setq comint-mode-map (make-sparse-keymap)) (define-key comint-mode-map "\ep" 'comint-previous-input) (define-key comint-mode-map "\en" 'comint-next-input) (define-key comint-mode-map "\er" 'comint-previous-matching-input) (define-key comint-mode-map "\es" 'comint-next-matching-input) + (define-key comint-mode-map [?\A-\M-r] 'comint-previous-matching-input-from-input) + (define-key comint-mode-map [?\A-\M-s] 'comint-next-matching-input-from-input) (define-key comint-mode-map "\C-m" 'comint-send-input) (define-key comint-mode-map "\C-d" 'comint-delchar-or-maybe-eof) (define-key comint-mode-map "\C-a" 'comint-bol) @@ -273,15 +414,91 @@ (define-key comint-mode-map "\C-c\C-c" 'comint-interrupt-subjob) (define-key comint-mode-map "\C-c\C-z" 'comint-stop-subjob) (define-key comint-mode-map "\C-c\C-\\" 'comint-quit-subjob) + ;; " ; Stops emacs-19.19's hilit getting confused. + (define-key comint-mode-map "\C-c\C-m" 'comint-copy-old-input) (define-key comint-mode-map "\C-c\C-o" 'comint-kill-output) (define-key comint-mode-map "\C-c\C-r" 'comint-show-output) - ;;; prompt-search commands commented out 3/90 -Olin -; (define-key comint-mode-map "\eP" 'comint-msearch-input) -; (define-key comint-mode-map "\eN" 'comint-psearch-input) -; (define-key comint-mode-map "\C-cR" 'comint-msearch-input-matching) + (define-key comint-mode-map "\C-c\C-e" 'comint-show-maximum-output) + (define-key comint-mode-map "\C-c\C-h" 'comint-dynamic-list-input-ring) (define-key comint-mode-map "\C-c\C-n" 'comint-next-prompt) - (define-key comint-mode-map "\C-c\C-p" 'comint-prev-prompt) + (define-key comint-mode-map "\C-c\C-p" 'comint-previous-prompt) (define-key comint-mode-map "\C-c\C-d" 'comint-send-eof) + ;; Menu bars: + ;; completion: + (define-key comint-mode-map [menu-bar completion] + (cons "Completion" (make-sparse-keymap "Completion"))) + (define-key comint-mode-map [menu-bar completion complete-expand] + '("Expand File Name" . comint-replace-by-expanded-filename)) + (define-key comint-mode-map [menu-bar completion complete-listing] + '("File Completion Listing" . comint-dynamic-list-filename-completions)) + (define-key comint-mode-map [menu-bar completion complete-variable] + '("Complete Variable Name" . comint-dynamic-complete-variable)) + (define-key comint-mode-map [menu-bar completion complete-command] + '("Complete Command Name" . (lambda () (interactive) + (funcall + comint-dynamic-complete-command-command)))) + (define-key comint-mode-map [menu-bar completion complete-file] + '("Complete File Name" . comint-dynamic-complete-filename)) + (define-key comint-mode-map [menu-bar completion complete] + '("Complete Before Point" . comint-dynamic-complete)) + ;; Input history: + (define-key comint-mode-map [menu-bar input] + (cons "Input" (make-sparse-keymap "Input"))) + (define-key comint-mode-map [menu-bar input kill-input] + '("Kill Current Input" . comint-kill-input)) + (define-key comint-mode-map [menu-bar input copy-input] + '("Copy Old Input" . comint-copy-old-input)) + (define-key comint-mode-map [menu-bar input next-matching-history] + '("Next Matching Input..." . comint-next-matching-input)) + (define-key comint-mode-map [menu-bar input previous-matching-history] + '("Previous Matching Input..." . comint-previous-matching-input)) + (define-key comint-mode-map [menu-bar input next-matching-history-from-input] + '("Next Matching Current Input" . comint-next-matching-input-from-input)) + (define-key comint-mode-map [menu-bar input previous-matching-history-from-input] + '("Previous Matching Current Input" . comint-previous-matching-input-from-input)) + (define-key comint-mode-map [menu-bar input next-history] + '("Next Input" . comint-next-input)) + (define-key comint-mode-map [menu-bar input previous-history] + '("Previous Input" . comint-previous-input)) + (define-key comint-mode-map [menu-bar input list-history] + '("List Input History" . comint-dynamic-list-input-ring)) + (define-key comint-mode-map [menu-bar input expand-history] + '("Expand History Before Point" . comint-replace-by-expanded-history)) + ;; Output: + (define-key comint-mode-map [menu-bar output] + (cons "Output" (make-sparse-keymap "Output"))) + (define-key comint-mode-map [menu-bar output kill-output] + '("Kill Current Output Group" . comint-kill-output)) + (define-key comint-mode-map [menu-bar input forward-matching-history] + '("Forward Matching Input..." . comint-forward-matching-input)) + (define-key comint-mode-map [menu-bar input backward-matching-history] + '("Backward Matching Input..." . comint-backward-matching-input)) + (define-key comint-mode-map [menu-bar output next-prompt] + '("Forward Output Group" . comint-next-prompt)) + (define-key comint-mode-map [menu-bar output previous-prompt] + '("Backward Output Group" . comint-previous-prompt)) + (define-key comint-mode-map [menu-bar output show-maximum-output] + '("Show Maximum Output" . comint-show-maximum-output)) + (define-key comint-mode-map [menu-bar output show-output] + '("Show Current Output Group" . comint-show-output)) + ;; Signals + (define-key comint-mode-map [menu-bar signals] + (cons "Signals" (make-sparse-keymap "Signals"))) + (define-key comint-mode-map [menu-bar signals eof] + '("EOF" . comint-send-eof)) + (define-key comint-mode-map [menu-bar signals kill] + '("KILL" . comint-kill-subjob)) + (define-key comint-mode-map [menu-bar signals quit] + '("QUIT" . comint-quit-subjob)) + (define-key comint-mode-map [menu-bar signals cont] + '("CONT" . comint-continue-subjob)) + (define-key comint-mode-map [menu-bar signals stop] + '("STOP" . comint-stop-subjob)) + (define-key comint-mode-map [menu-bar signals break] + '("BREAK" . comint-interrupt-subjob)) + ;; Put them in the menu bar: + (setq menu-bar-final-items (append '(completion input output signals) + menu-bar-final-items)) ) @@ -296,7 +513,7 @@ (t km))) (defun comint-check-proc (buffer) - "True if there is a living process associated w/buffer BUFFER. + "Return t if there is a living process associated w/buffer BUFFER. Living means the status is `run' or `stop'. BUFFER can be either a buffer or the name of one." (let ((proc (get-buffer-process buffer))) @@ -332,7 +549,7 @@ (if proc (delete-process proc))) ;; Crank up a new process (let ((proc (comint-exec-1 name buffer command switches))) - (set-process-filter proc 'comint-filter) + (set-process-filter proc 'comint-output-filter) (make-local-variable 'comint-ptyp) (setq comint-ptyp process-connection-type) ; T if pty, NIL if pipe. ;; Jump to the end, and set the process mark. @@ -358,238 +575,452 @@ ;;; the appropriate environment. (defun comint-exec-1 (name buffer command switches) - (let ((process-environment - (comint-update-env process-environment - (list (format "TERMCAP=emacs:co#%d:tc=unknown" - (frame-width)) - "TERM=emacs" - "EMACS=t")))) + (let ((process-environment process-environment)) + (setenv "TERMCAP" (format "emacs:co#%d:tc=unknown" (frame-width))) + (setenv "TERM" "emacs") + (setenv "EMACS" "t") (apply 'start-process name buffer command switches))) - + +;;; Input history processing in a buffer +;;; =========================================================================== +;;; Useful input history functions, courtesy of the Ergo group. + +;;; Eleven commands: +;;; comint-dynamic-list-input-ring List history in help buffer. +;;; comint-previous-input Previous input... +;;; comint-previous-matching-input ...matching a string. +;;; comint-previous-matching-input-from-input ... matching the current input. +;;; comint-next-input Next input... +;;; comint-next-matching-input ...matching a string. +;;; comint-next-matching-input-from-input ... matching the current input. +;;; comint-backward-matching-input Backwards input... +;;; comint-forward-matching-input ...matching a string. +;;; comint-replace-by-expanded-history Expand history at point; +;;; replace with expanded history. +;;; comint-magic-space Expand history and insert space. +;;; +;;; Two functions: +;;; comint-read-input-ring Read into comint-input-ring... +;;; comint-write-input-ring Write to comint-input-ring-file-name. + +(defun comint-read-input-ring () + "Sets the buffer's `comint-input-ring' from a history file. +The name of the file is given by the variable `comint-input-ring-file-name'. +The history ring is of size `comint-input-ring-size', regardless of file size. +If `comint-input-ring-file-name' is nil this function does nothing. + +Useful within mode or mode hooks. + +The structure of the history file should be one input command per line, and +most recent command last. +See also `comint-input-ignoredups' and `comint-write-input-ring'." + (cond ((null comint-input-ring-file-name) + nil) + ((not (file-readable-p comint-input-ring-file-name)) + (message "Cannot read history file %s" comint-input-ring-file-name)) + (t + (let ((history-buf (get-file-buffer comint-input-ring-file-name)) + (ring (make-ring comint-input-ring-size))) + (save-excursion + (set-buffer (or history-buf + (find-file-noselect comint-input-ring-file-name))) + ;; Save restriction in case file is already visited... + ;; Watch for those date stamps in history files! + (save-excursion + (save-restriction + (widen) + (goto-char (point-min)) + (while (re-search-forward "^\\s *\\([^#].*\\)\\s *$" nil t) + (let ((history (buffer-substring (match-beginning 1) + (match-end 1)))) + (if (or (null comint-input-ignoredups) + (ring-empty-p ring) + (not (string-equal (ring-ref ring 0) history))) + (ring-insert ring history))))) + ;; Kill buffer unless already visited. + (if (null history-buf) + (kill-buffer nil)))) + (setq comint-input-ring ring + comint-input-ring-index nil))))) + +(defun comint-write-input-ring () + "Writes the buffer's `comint-input-ring' to a history file. +The name of the file is given by the variable `comint-input-ring-file-name'. +The original contents of the file are lost if `comint-input-ring' is not empty. +If `comint-input-ring-file-name' is nil this function does nothing. + +Useful within process sentinels. + +See also `comint-read-input-ring'." + (cond ((or (null comint-input-ring-file-name) + (null comint-input-ring) (ring-empty-p comint-input-ring)) + nil) + ((not (file-writable-p comint-input-ring-file-name)) + (message "Cannot write history file %s" comint-input-ring-file-name)) + (t + (let* ((history-buf (get-buffer-create " *Temp Input History*")) + (ring comint-input-ring) + (file comint-input-ring-file-name) + (index (ring-length ring))) + ;; Write it all out into a buffer first. Much faster, but messier, + ;; than writing it one line at a time. + (save-excursion + (set-buffer history-buf) + (erase-buffer) + (while (> index 0) + (setq index (1- index)) + (insert (ring-ref ring index) ?\n)) + (write-region (buffer-string) nil file nil 'no-message) + (kill-buffer nil)))))) -;; This is just (append new old-env) that compresses out shadowed entries. -;; It's also pretty ugly, mostly due to lisp's horrible iteration structures. -(defun comint-update-env (old-env new) - (let ((ans (reverse new)) - (vars (mapcar (function (lambda (vv) - (and (string-match "^[^=]*=" vv) - (substring vv 0 (match-end 0))))) - new))) - (while old-env - (let* ((vv (car old-env)) ; vv is var=value - (var (and (string-match "^[^=]*=" vv) - (substring vv 0 (match-end 0))))) - (setq old-env (cdr old-env)) - (cond ((not (and var (member var vars))) - (if var (setq var (cons var vars))) - (setq ans (cons vv ans)))))) - (nreverse ans))) +(defun comint-dynamic-list-input-ring () + "List in help buffer the buffer's input history." + (interactive) + (if (or (not (ring-p comint-input-ring)) + (ring-empty-p comint-input-ring)) + (message "No history") + (let ((history nil) + (history-buffer " *Input History*") + (index (1- (ring-length comint-input-ring))) + (conf (current-window-configuration))) + ;; We have to build up a list ourselves from the ring vector. + (while (>= index 0) + (setq history (cons (ring-ref comint-input-ring index) history) + index (1- index))) + ;; Change "completion" to "history reference" + ;; to make the display accurate. + (with-output-to-temp-buffer history-buffer + (display-completion-list history) + (set-buffer history-buffer) + (forward-line 3) + (while (search-backward "completion" nil 'move) + (replace-match "history reference"))) + (sit-for 0) + (message "Hit space to flush") + (let ((ch (read-event))) + (if (eq ch ?\ ) + (set-window-configuration conf) + (setq unread-command-events (list ch))))))) + - -;;; Input history retrieval commands -;;; M-p -- previous input M-n -- next input -;;; M-C-r -- previous input matching -;;; =========================================================================== +(defun comint-regexp-arg (prompt) + ;; Return list of regexp and prefix arg using PROMPT. + (let* ((minibuffer-history-sexp-flag nil) + ;; Don't clobber this. + (last-command last-command) + (regexp (read-from-minibuffer prompt nil nil nil + 'minibuffer-history-search-history))) + (list (if (string-equal regexp "") + (setcar minibuffer-history-search-history + (nth 1 minibuffer-history-search-history)) + regexp) + (prefix-numeric-value current-prefix-arg)))) + +(defun comint-search-arg (arg) + ;; First make sure there is a ring and that we are after the process mark + (cond ((not (comint-after-pmark-p)) + (error "Not at command line")) + ((or (null comint-input-ring) + (ring-empty-p comint-input-ring)) + (error "Empty input ring")) + ((zerop arg) + ;; arg of zero resets search from beginning, and uses arg of 1 + (setq comint-input-ring-index nil) + 1) + (t + arg))) + +(defun comint-search-start (arg) + ;; Index to start a directional search, starting at comint-input-ring-index + (if comint-input-ring-index + ;; If a search is running, offset by 1 in direction of arg + (mod (+ comint-input-ring-index (if (> arg 0) 1 -1)) + (ring-length comint-input-ring)) + ;; For a new search, start from beginning or end, as appropriate + (if (>= arg 0) + 0 ; First elt for forward search + (1- (ring-length comint-input-ring))))) ; Last elt for backward search + +(defun comint-previous-input-string (arg) + "Return the string ARG places along the input ring. +Moves relative to `comint-input-ring-index'." + (ring-ref comint-input-ring (if comint-input-ring-index + (mod (+ arg comint-input-ring-index) + (ring-length comint-input-ring)) + arg))) (defun comint-previous-input (arg) "Cycle backwards through input history." (interactive "*p") - (let ((len (ring-length comint-input-ring))) - (cond ((<= len 0) - (message "Empty input ring") - (ding)) - ((not (comint-after-pmark-p)) - (message "Not after process mark") - (ding)) - (t - (delete-region (point) - (process-mark (get-buffer-process (current-buffer)))) - ;; Initialize the index on the first use of this command - ;; so that the first M-p gets index 0, and the first M-n gets - ;; index -1. - (if (null comint-input-ring-index) - (setq comint-input-ring-index - (if (> arg 0) -1 - (if (< arg 0) 1 0)))) - (setq comint-input-ring-index - (mod (+ comint-input-ring-index arg) len)) - (message "%d" (1+ comint-input-ring-index)) - (insert (ring-ref comint-input-ring comint-input-ring-index)))))) + (comint-previous-matching-input "." arg)) (defun comint-next-input (arg) "Cycle forwards through input history." (interactive "*p") (comint-previous-input (- arg))) +(defun comint-previous-matching-input-string (regexp arg) + "Return the string matching REGEXP ARG places along the input ring. +Moves relative to `comint-input-ring-index'." + (let* ((pos (comint-previous-matching-input-string-position regexp arg))) + (if pos (ring-ref comint-input-ring pos)))) + +(defun comint-previous-matching-input-string-position (regexp arg &optional start) + "Return the index matching REGEXP ARG places along the input ring. +Moves relative to START, or `comint-input-ring-index'." + (if (or (not (ring-p comint-input-ring)) + (ring-empty-p comint-input-ring)) + (error "No history")) + (let* ((len (ring-length comint-input-ring)) + (motion (if (> arg 0) 1 -1)) + (n (mod (- (or start (comint-search-start arg)) motion) len)) + (tried-each-ring-item nil) + (prev nil)) + ;; Do the whole search as many times as the argument says. + (while (and (/= arg 0) (not tried-each-ring-item)) + ;; Step once. + (setq prev n + n (mod (+ n motion) len)) + ;; If we haven't reached a match, step some more. + (while (and (< n len) (not tried-each-ring-item) + (not (string-match regexp (ring-ref comint-input-ring n)))) + (setq n (mod (+ n motion) len) + ;; If we have gone all the way around in this search. + tried-each-ring-item (= n prev))) + (setq arg (if (> arg 0) (1- arg) (1+ arg)))) + ;; Now that we know which ring element to use, if we found it, return that. + (if (string-match regexp (ring-ref comint-input-ring n)) + n))) + (defun comint-previous-matching-input (regexp arg) "Search backwards through input history for match for REGEXP. \(Previous history elements are earlier commands.) With prefix argument N, search for Nth previous match. If N is negative, find the next or Nth next match." - (interactive - (let* ((minibuffer-history-sexp-flag nil) - ;; Don't clobber this. - (last-command last-command) - (regexp (read-from-minibuffer "Previous input matching (regexp): " - nil - minibuffer-local-map - nil - 'minibuffer-history-search-history))) - (list (if (string= regexp "") - (setcar minibuffer-history-search-history - (nth 1 minibuffer-history-search-history)) - regexp) - (prefix-numeric-value current-prefix-arg)))) - (if (null comint-input-ring-index) - (setq comint-input-ring-index -1)) - (let* ((len (ring-length comint-input-ring)) - (motion (if (> arg 0) 1 -1)) - (n comint-input-ring-index)) - ;; Do the whole search as many times as the argument says. - (while (/= arg 0) - (let ((prev n)) - ;; Step once. - (setq n (mod (+ n motion) len)) - ;; If we haven't reached a match, step some more. - (while (and (< n len) - (not (string-match regexp (ring-ref comint-input-ring n)))) - (setq n (mod (+ n motion) len)) - ;; If we have gone all the way around in this search, error. - (if (= n prev) - (error "Not found")))) - (setq arg (if (> arg 0) (1- arg) (1+ arg)))) - ;; Now that we know which ring element to use, - ;; substitute that for the current input. - (comint-previous-input (- n comint-input-ring-index)))) + (interactive (comint-regexp-arg "Previous input matching (regexp): ")) + (setq arg (comint-search-arg arg)) + (let ((pos (comint-previous-matching-input-string-position regexp arg))) + ;; Has a match been found? + (if (null pos) + (error "Not found") + (setq comint-input-ring-index pos) + (message "History item: %d" (1+ pos)) + (delete-region + ;; Can't use kill-region as it sets this-command + (process-mark (get-buffer-process (current-buffer))) (point)) + (insert (ring-ref comint-input-ring pos))))) (defun comint-next-matching-input (regexp arg) "Search forwards through input history for match for REGEXP. \(Later history elements are more recent commands.) With prefix argument N, search for Nth following match. If N is negative, find the previous or Nth previous match." - (interactive - (let ((minibuffer-history-sexp-flag nil) - ;; Don't clobber this. - (last-command last-command) - (regexp (read-from-minibuffer "Previous input matching (regexp): " - nil - minibuffer-local-map - nil - 'minibuffer-history-search-history))) - (list (if (string= regexp "") - (setcar minibuffer-history-search-history - (nth 1 minibuffer-history-search-history)) - regexp) - (prefix-numeric-value current-prefix-arg)))) + (interactive (comint-regexp-arg "Next input matching (regexp): ")) (comint-previous-matching-input regexp (- arg))) - -;;; These next three commands are alternatives to the input history commands -;;; They search through the process buffer -;;; text looking for occurrences of the prompt. Bound to M-P, M-N, and C-c R -;;; (uppercase P, N, and R) for now. Try'em out. Go with what you like... -;;; comint-msearch-input-matching prompts for a string, not a regexp. -;;; This could be considered to be the wrong thing. I decided to keep it -;;; simple, and not make the user worry about regexps. This, of course, -;;; limits functionality. +(defun comint-previous-matching-input-from-input (arg) + "Search backwards through input history for match for current input. +\(Previous history elements are earlier commands.) +With prefix argument N, search for Nth previous match. +If N is negative, find the next or Nth next match." + (interactive "p") + (if (not (memq last-command '(comint-previous-matching-input-from-input + comint-next-matching-input-from-input))) + ;; Starting a new search + (setq comint-matching-input-from-input-string + (buffer-substring + (process-mark (get-buffer-process (current-buffer))) + (point)) + comint-input-ring-index nil)) + (comint-previous-matching-input + (concat "^" (regexp-quote comint-matching-input-from-input-string)) + arg)) -;;; These commands were deemed non-winning and have been commented out. -;;; Feel free to re-enable them if you like. -Olin 3/91 +(defun comint-next-matching-input-from-input (arg) + "Search forwards through input history for match for current input. +\(Previous history elements are earlier commands.) +With prefix argument N, search for Nth previous match. +If N is negative, find the next or Nth next match." + (interactive "p") + (comint-previous-matching-input-from-input (- arg))) + + +(defun comint-replace-by-expanded-history () + "Expand input command history references before point. +This function depends on the buffer's idea of the input history, which may not +match the command interpreter's idea, assuming it has one. + +Assumes history syntax is like typical Un*x shells'. However, since emacs +cannot know the interpreter's idea of input line numbers, assuming it has one, +it cannot expand absolute input line number references. -;(defun comint-psearch-input () -; "Search forwards for next occurrence of prompt and skip to end of line. -;\(prompt is anything matching regexp comint-prompt-regexp)" -; (interactive) -; (if (re-search-forward comint-prompt-regexp (point-max) t) -; (end-of-line) -; (error "No occurrence of prompt found"))) -; -;(defun comint-msearch-input () -; "Search backwards for previous occurrence of prompt and skip to end of line. -;Search starts from beginning of current line." -; (interactive) -; (let ((p (save-excursion -; (beginning-of-line) -; (cond ((re-search-backward comint-prompt-regexp (point-min) t) -; (end-of-line) -; (point)) -; (t nil))))) -; (if p (goto-char p) -; (error "No occurrence of prompt found")))) -; -;(defun comint-msearch-input-matching (str) -; "Search backwards for occurrence of prompt followed by STRING. -;STRING is prompted for, and is NOT a regular expression." -; (interactive (let ((s (read-from-minibuffer -; (format "Command (default %s): " -; comint-last-input-match)))) -; (list (if (string= s "") comint-last-input-match s)))) -;; (interactive "sCommand: ") -; (setq comint-last-input-match str) ; update default -; (let* ((r (concat comint-prompt-regexp (regexp-quote str))) -; (p (save-excursion -; (beginning-of-line) -; (cond ((re-search-backward r (point-min) t) -; (end-of-line) -; (point)) -; (t nil))))) -; (if p (goto-char p) -; (error "No match")))) +See also `comint-magic-space'." + (interactive) + (save-excursion + (let ((toend (- (save-excursion (end-of-line nil) (point)) (point))) + (start (progn (comint-bol nil) (point)))) + (while (re-search-forward + "[!^]" (save-excursion (end-of-line nil) (- (point) toend)) t) + ;; This seems a bit complex. We look for references such as !!, !-num, + ;; !foo, !?foo, !{bar}, !?{bar}, ^oh, ^my^, ^god^it, ^never^ends^. + ;; If that wasn't enough, the plings can be suffixed with argument + ;; range specifiers. + ;; Argument ranges are complex too, so we hive off the input line, + ;; referenced with plings, with the range string to `comint-args'. + (setq comint-input-ring-index nil) + (goto-char (match-beginning 0)) + (cond ((or (= (preceding-char) ?\\) + (comint-within-quotes start (point))) + ;; The history is quoted, or we're in quotes. + (goto-char (match-end 0))) + ((looking-at "![0-9]+\\($\\|[^-]\\)") + ;; We cannot know the interpreter's idea of input line numbers. + (goto-char (match-end 0)) + (message "Absolute reference cannot be expanded")) + ((looking-at "!-\\([0-9]+\\)\\(:?[0-9^$*-]+\\)?") + ;; Just a number of args from `number' lines backward. + (let ((number (1- (string-to-number + (buffer-substring (match-beginning 1) + (match-end 1)))))) + (if (<= number (ring-length comint-input-ring)) + (progn + (replace-match + (comint-args (comint-previous-input-string number) + (match-beginning 2) (match-end 2)) t t) + (setq comint-input-ring-index number) + (message "History item: %d" (1+ number))) + (goto-char (match-end 0)) + (message "Relative reference exceeds input history size")))) + ((or (looking-at "!!?:?\\([0-9^$*-]+\\)") (looking-at "!!")) + ;; Just a number of args from the previous input line. + (replace-match + (comint-args (comint-previous-input-string 0) + (match-beginning 1) (match-end 1)) t t)) + ((looking-at + "!\\??\\({\\(.+\\)}\\|\\(\\sw+\\)\\)\\(:?[0-9^$*-]+\\)?") + ;; Most recent input starting with or containing (possibly + ;; protected) string, maybe just a number of args. Phew. + (let* ((mb1 (match-beginning 1)) (me1 (match-end 1)) + (mb2 (match-beginning 2)) (me2 (match-end 2)) + (exp (buffer-substring (or mb2 mb1) (or me2 me1))) + (pref (if (save-match-data (looking-at "!\\?")) "" "^")) + (pos (save-match-data + (comint-previous-matching-input-string-position + (concat pref (regexp-quote exp)) 1)))) + (if (null pos) + (progn (message "Not found") + (goto-char (match-end 0)) + (ding)) + (setq comint-input-ring-index pos) + (message "History item: %d" (1+ pos)) + (replace-match + (comint-args (ring-ref comint-input-ring pos) + (match-beginning 4) (match-end 4)) + t t)))) + ((looking-at "\\^\\([^^]+\\)\\^?\\([^^]*\\)\\^?") + ;; Quick substitution on the previous input line. + (let ((old (buffer-substring (match-beginning 1) (match-end 1))) + (new (buffer-substring (match-beginning 2) (match-end 2))) + (pos nil)) + (replace-match (comint-previous-input-string 0) t t) + (setq pos (point)) + (goto-char (match-beginning 0)) + (if (search-forward old pos t) + (replace-match new t t) + (message "Not found") + (ding)))) + (t + (goto-char (match-end 0)))))))) + -;;; -;;; Similar input -- contributed by ccm and highly winning. -;;; -;;; Reenter input, removing back to the last insert point if it exists. +(defun comint-magic-space (arg) + "Expand input history references before point and insert ARG spaces. +A useful command to bind to SPC. See `comint-replace-by-expanded-history'." + (interactive "p") + (comint-replace-by-expanded-history) + (self-insert-command arg)) + +(defun comint-within-quotes (beg end) + "Return t if the number of quotes between BEG and END is odd. +Quotes are single and double." + (let ((countsq (comint-how-many-region "\\(^\\|[^\\\\]\\)\'" beg end)) + (countdq (comint-how-many-region "\\(^\\|[^\\\\]\\)\"" beg end))) + (or (= (mod countsq 2) 1) (= (mod countdq 2) 1)))) + +(defun comint-how-many-region (regexp beg end) + "Return number of matches for REGEXP from BEG to END." + (let ((count 0)) + (save-excursion + (save-match-data + (goto-char beg) + (while (re-search-forward regexp end t) + (setq count (1+ count))))) + count)) + +(defun comint-args (string begin end) + ;; From STRING, return the args depending on the range specified in the text + ;; from BEGIN to END. If BEGIN is nil, assume all args. Ignore leading `:'. + ;; Range can be x-y, x-, -y, where x/y can be [0-9], *, ^, $. + (save-match-data + (if (null begin) + (comint-arguments string 0 nil) + (let* ((range (buffer-substring + (if (eq (char-after begin) ?:) (1+ begin) begin) end)) + (nth (cond ((string-match "^[*^]" range) 1) + ((string-match "^-" range) 0) + ((string-equal range "$") nil) + (t (string-to-number range)))) + (mth (cond ((string-match "[-*$]$" range) nil) + ((string-match "-" range) + (string-to-number (substring range (match-end 0)))) + (t nth)))) + (comint-arguments string nth mth))))) + +(defun comint-delim-arg (arg) + ;; Return a list of arguments from ARG. If there's a quote in there, just + ;; a list of the arg, otherwise try and break up using characters in + ;; comint-delimiter-argument-list. Returned list is backwards. + (if (or (null comint-delimiter-argument-list) + (string-match "[\"\'\`]" arg)) + (list arg) + (let ((not-delim (format "[^%s]+" (mapconcat + (function (lambda (d) (regexp-quote d))) + comint-delimiter-argument-list ""))) + (delim-str (mapconcat (function (lambda (d) + (concat (regexp-quote d) "+"))) + comint-delimiter-argument-list "\\|")) + (args ()) (pos 0)) + (while (or (eq pos (string-match not-delim arg pos)) + (eq pos (string-match delim-str arg pos))) + (setq pos (match-end 0) + args (cons (substring arg (match-beginning 0) pos) args))) + args))) + +(defun comint-arguments (string nth mth) + "Return from STRING the NTH to MTH arguments. +NTH and/or MTH can be nil, which means the last argument. +Returned arguments are separated by single spaces. Arguments are assumed to be +delimited by whitespace. Strings comprising characters in the variable +`comint-delimiter-argument-list' are treated as delimiters and arguments. +Argument 0 is the command name." + (let ((arg "\\(\\S \\|\\(\"[^\"]*\"\\|\'[^\']*\'\\|\`[^\`]*\`\\)\\)+") + (args ()) (pos 0) (str nil)) + ;; We build a list of all the args. Unnecessary, but more efficient, when + ;; ranges of args are required, than picking out one by one and recursing. + (while (string-match arg string pos) + (setq pos (match-end 0) + str (substring string (match-beginning 0) pos) + args (nconc (comint-delim-arg str) args))) + (let ((n (or nth (1- (length args)))) + (m (if mth (1- (- (length args) mth)) 0))) + (mapconcat + (function (lambda (a) a)) (nthcdr n (nreverse (nthcdr m args))) " ")))) + ;;; -;;(defvar comint-last-similar-string "" -;; "The string last used in a similar string search.") +;;; Input processing stuff +;;; -;;(defun comint-previous-similar-input (arg) -;; "Fetch the previous (older) input that matches the string typed so far. -;;Successive repetitions find successively older matching inputs. -;;A prefix argument serves as a repeat count; a negative argument -;;fetches following (more recent) inputs." -;; (interactive "p") -;; (if (not (comint-after-pmark-p)) -;; (error "Not after process mark")) -;; (if (null comint-input-ring-index) -;; (setq comint-input-ring-index -;; (if (> arg 0) -1 -;; (if (< arg 0) 1 0)))) -;; (if (not (or (eq last-command 'comint-previous-similar-input) -;; (eq last-command 'comint-next-similar-input))) -;; (setq comint-last-similar-string -;; (buffer-substring -;; (process-mark (get-buffer-process (current-buffer))) -;; (point)))) -;; (let* ((size (length comint-last-similar-string)) -;; (len (ring-length comint-input-ring)) -;; (n (+ comint-input-ring-index arg)) -;; entry) -;; (while (and (< n len) -;; (or (< (length (setq entry (ring-ref comint-input-ring n))) size) -;; (not (equal comint-last-similar-string -;; (substring entry 0 size))))) -;; (setq n (+ n arg))) -;; (cond ((< n len) -;; (setq comint-input-ring-index n) -;; (if (or (eq last-command 'comint-previous-similar-input) -;; (eq last-command 'comint-next-similar-input)) -;; (delete-region (mark) (point)) ; repeat -;; (push-mark (point))) ; 1st time -;; (insert (substring entry size))) -;; (t (error "Not found"))) -;; (message "%d" (1+ comint-input-ring-index)))) - -;;(defun comint-next-similar-input (arg) -;; "Fetch the next (newer) input that matches the string typed so far. -;;Successive repetitions find successively newer matching inputs. -;;A prefix argument serves as a repeat count; a negative argument -;;fetches previous (older) inputs." -;; (interactive "p") -;; (comint-previous-similar-input (- arg))) - (defun comint-send-input () "Send input to process. After the process output mark, sends all text from the process mark to @@ -600,10 +1031,11 @@ \(if it is non-nil, all text from the process mark to point is deleted, since it is assumed the remote process will re-echo it). -The value of variable `comint-input-sentinel' is called on the input -before sending it. The input is entered into the input history ring, -if the value of variable `comint-input-filter' returns non-nil when -called on the input. +Any history reference may be expanded depending on the value of the variable +`comint-input-autoexpand'. The value of variable `comint-input-sentinel' is +called on the input before sending it. The input is entered into the input +history ring, if the value of variable `comint-input-filter' returns non-nil +when called on the input. If variable `comint-eol-on-send' is non-nil, then point is moved to the end of line before sending the input. @@ -615,13 +1047,13 @@ initial string matching regexp comint-prompt-regexp. comint-input-sentinel monitors input for \"cd\", \"pushd\", and \"popd\" commands. When it sees one, it cd's the buffer. - comint-input-filter is the default: returns T if the input isn't all white + comint-input-filter is the default: returns t if the input isn't all white space. If the comint is Lucid Common Lisp, comint-get-old-input snarfs the sexp ending at point. comint-input-sentinel does nothing. - comint-input-filter returns NIL if the input matches input-filter-regexp, + comint-input-filter returns nil if the input matches input-filter-regexp, which matches (1) all whitespace (2) :a, :c, etc. Similarly for Soar, Scheme, etc." @@ -630,64 +1062,155 @@ (let ((proc (get-buffer-process (current-buffer)))) (if (not proc) (error "Current buffer has no process") (let* ((pmark (process-mark proc)) - (pmark-val (marker-position pmark)) - (input (if (>= (point) pmark-val) + (intxt (if (>= (point) (marker-position pmark)) (progn (if comint-eol-on-send (end-of-line)) (buffer-substring pmark (point))) (let ((copy (funcall comint-get-old-input))) (goto-char pmark) (insert copy) - copy)))) + copy))) + (input (if (not (eq comint-input-autoexpand 'input)) + ;; Just whatever's already there + intxt + ;; Expand and leave it visible in buffer + (comint-replace-by-expanded-history) + (buffer-substring pmark (point)))) + (history (if (not (eq comint-input-autoexpand 'history)) + (comint-arguments input 0 nil) + ;; This is messy 'cos ultimately the original + ;; functions used do insertion, rather than return + ;; strings. We have to expand, then insert back. + (comint-replace-by-expanded-history) + (let ((copy (buffer-substring pmark (point)))) + (delete-region pmark (point)) + (insert input) + (comint-arguments copy 0 nil))))) (if comint-process-echoes (delete-region pmark (point)) - (insert ?\n)) - (if (funcall comint-input-filter input) - (ring-insert comint-input-ring input)) + (insert ?\n)) + (if (and (funcall comint-input-filter history) + (or (null comint-input-ignoredups) + (not (ring-p comint-input-ring)) + (ring-empty-p comint-input-ring) + (not (string-equal (ring-ref comint-input-ring 0) + history)))) + (ring-insert comint-input-ring history)) (funcall comint-input-sentinel input) (funcall comint-input-sender proc input) (setq comint-input-ring-index nil) (set-marker comint-last-input-start pmark) (set-marker comint-last-input-end (point)) - (set-marker (process-mark proc) (point)))))) + (set-marker (process-mark proc) (point)) + ;; A kludge to prevent the delay between insert and process output + ;; affecting the display. A case for a comint-send-input-hook? + (run-hooks 'comint-output-filter-hook))))) -;; The sole purpose of using this filter for comint processes +;; The purpose of using this filter for comint processes ;; is to keep comint-last-input-end from moving forward ;; when output is inserted. -(defun comint-filter (process string) - (let ((obuf (current-buffer)) - opoint obeg oend) - (set-buffer (process-buffer process)) - (setq opoint (point)) - (setq obeg (point-min)) - (setq oend (point-max)) - (let ((buffer-read-only nil) - (nchars (length string))) - (widen) - (goto-char (process-mark process)) - (if (<= (point) opoint) - (setq opoint (+ opoint nchars))) - ;; Insert after old_begv, but before old_zv. - (if (< (point) obeg) - (setq obeg (+ obeg nchars))) - (if (<= (point) oend) - (setq oend (+ oend nchars))) +(defun comint-output-filter (process string) + ;; First check for killed buffer + (if (not (comint-check-proc (process-buffer process))) + (message + "comint-output-filter: buffer %s received output with no process" + (process-buffer process)) + (let ((obuf (current-buffer)) + (opoint nil) (obeg nil) (oend nil)) + (set-buffer (process-buffer process)) + (setq opoint (point)) + (setq obeg (point-min)) + (setq oend (point-max)) + (let ((buffer-read-only nil) + (nchars (length string)) + (ostart nil)) + (widen) + (goto-char (process-mark process)) + (setq ostart (point)) + (if (<= (point) opoint) + (setq opoint (+ opoint nchars))) + ;; Insert after old_begv, but before old_zv. + (if (< (point) obeg) + (setq obeg (+ obeg nchars))) + (if (<= (point) oend) + (setq oend (+ oend nchars))) + (insert-before-markers string) + ;; Don't insert initial prompt outside the top of the window. + (if (= (window-start (selected-window)) (point)) + (set-window-start (selected-window) (- (point) (length string)))) + (if (and comint-last-input-end + (marker-buffer comint-last-input-end) + (= (point) comint-last-input-end)) + (set-marker comint-last-input-end (- comint-last-input-end nchars))) + (set-marker comint-last-output-start ostart) + (set-marker (process-mark process) (point)) + (force-mode-line-update)) + + (narrow-to-region obeg oend) + (goto-char opoint) + (run-hooks 'comint-output-filter-hook) + + (set-buffer obuf)))) + +(defun comint-preinput-scroll-to-bottom (beg end) + "Go to the end of buffer in all windows showing it. +Movement occurs if point in the selected window is not after the process mark, +and `this-command' is an insertion command. Insertion commands recognised +are `self-insert-command', `yank', `mouse-yank-at-click', and `hilit-yank'. +Depends on the value of `comint-scroll-to-bottom-on-input'. - (insert-before-markers string) - ;; Don't insert initial prompt outside the top of the window. - (if (= (window-start (selected-window)) (point)) - (set-window-start (selected-window) (- (point) (length string)))) +This function should be bound to `before-change-function'." + (if (and comint-scroll-to-bottom-on-input + (memq this-command '(self-insert-command yank mouse-yank-at-click + hilit-yank))) + (let* ((selected (selected-window)) + (current (current-buffer)) + (process (get-buffer-process current)) + (scroll comint-scroll-to-bottom-on-input)) + (if (and process (< (point) (process-mark process)) + scroll (not (window-minibuffer-p selected))) + (walk-windows + (function (lambda (window) + (if (and (eq (window-buffer window) current) + (or (eq scroll t) (eq scroll 'all) + (and (eq scroll 'this) (eq selected window)))) + (progn + (select-window window) + (goto-char (point-max)) + (select-window selected))))) + 'not-minibuf t))))) + +(defun comint-postoutput-scroll-to-bottom () + "Go to the end of buffer in all windows showing it. +Does not scroll if the current line is the last line in the buffer. +Depends on the value of `comint-scroll-to-bottom-on-output' and +`comint-scroll-show-maximum-output'. - (and comint-last-input-end - (marker-buffer comint-last-input-end) - (= (point) comint-last-input-end) - (set-marker comint-last-input-end - (- comint-last-input-end nchars))) - (set-marker (process-mark process) (point) nil) - (force-mode-line-update)) +This function should be bound to `comint-output-filter-hook'." + (let* ((selected (selected-window)) + (current (current-buffer)) + (process (get-buffer-process current)) + (scroll comint-scroll-to-bottom-on-output)) + (if (and process scroll (not (window-minibuffer-p selected))) + (walk-windows + (function (lambda (window) + (if (and (eq (window-buffer window) current) + (or (eq scroll t) (eq scroll 'all) + (and (eq scroll 'this) (eq selected window)) + (and (eq scroll 'others) (not (eq selected window))))) + (progn + (select-window window) + (if (not (save-excursion (end-of-line nil) (eobp))) + (goto-char (process-mark process))) + (if comint-scroll-show-maximum-output + (recenter -1)) + (select-window selected))))) + 'not-minibuf t)))) - (narrow-to-region obeg oend) - (goto-char opoint) - (set-buffer obuf))) +(defun comint-show-maximum-output () + "Put the end of the buffer at the bottom of the window." + (interactive) + (goto-char (point-max)) + (recenter -1)) (defun comint-get-old-input-default () "Default for `comint-get-old-input'. @@ -700,6 +1223,17 @@ (end-of-line) (buffer-substring beg (point))))) +(defun comint-copy-old-input () + "Insert after prompt old input at point as new input to be edited. +Calls `comint-get-old-input' to get old input." + (interactive) + (let ((input (funcall comint-get-old-input)) + (process (get-buffer-process (current-buffer)))) + (if (not process) + (error "Current buffer has no process") + (goto-char (process-mark process)) + (insert input)))) + (defun comint-skip-prompt () "Skip past the text matching regexp `comint-prompt-regexp'. If this takes us past the end of the current line, don't skip at all." @@ -708,16 +1242,10 @@ (<= (match-end 0) eol)) (goto-char (match-end 0))))) - (defun comint-after-pmark-p () - "Is point after the process output marker?" - ;; Since output could come into the buffer after we looked at the point - ;; but before we looked at the process marker's value, we explicitly - ;; serialise. This is just because I don't know whether or not emacs - ;; services input during execution of lisp commands. - (let ((proc-pos (marker-position - (process-mark (get-buffer-process (current-buffer)))))) - (<= proc-pos (point)))) + "Return t if point is after the process output marker." + (let ((pmark (process-mark (get-buffer-process (current-buffer))))) + (<= (marker-position pmark) (point)))) (defun comint-simple-send (proc string) "Default function for sending to PROC input STRING. @@ -728,8 +1256,7 @@ (defun comint-bol (arg) "Goes to the beginning of line, then skips past the prompt, if any. -If a prefix argument is given (\\[universal-argument]), then no prompt skip --- go straight to column 0. +If prefix argument is given (\\[universal-argument]) the prompt is not skipped. The prompt skip is done by skipping text matching the regular expression `comint-prompt-regexp', a buffer local variable. @@ -798,7 +1325,6 @@ is additionally sent. String is not saved on comint input history list. Security bug: your string can still be temporarily recovered with \\[view-lossage]." -; (interactive (list (comint-read-noecho "Enter non-echoed text"))) (interactive "P") ; Defeat snooping via C-x esc (let ((proc (get-buffer-process (current-buffer)))) (if (not proc) (error "Current buffer has no process") @@ -826,6 +1352,7 @@ (while (< i len) (let ((next-i (+ i comint-input-chunk-size))) (accept-process-output) + (sit-for 0) (process-send-string proc (substring str i (min len next-i))) (setq i next-i))))) @@ -834,28 +1361,33 @@ This is a replacement for `process-send-region' that tries to keep your process from hanging on long inputs. See `comint-send-string'." (comint-send-string proc (buffer-substring start end))) - ;;; Random input hackage (defun comint-kill-output () - "Kill all output from interpreter since last input." + "Kill all output from interpreter since last input. +Does not delete the prompt." (interactive) - (let ((pmark (process-mark (get-buffer-process (current-buffer))))) + (let ((pmark (progn (goto-char + (process-mark (get-buffer-process (current-buffer)))) + (beginning-of-line nil) + (point-marker)))) (kill-region comint-last-input-end pmark) - (goto-char pmark) (insert "*** output flushed ***\n") + (comint-skip-prompt) (set-marker pmark (point)))) (defun comint-show-output () "Display start of this batch of interpreter output at top of window. -Also put cursor there." +Also put cursor there if the current position is not visible." (interactive) - (goto-char comint-last-input-end) - (backward-char) - (beginning-of-line) - (set-window-start (selected-window) (point)) - (end-of-line)) + (let ((pos (point))) + (goto-char comint-last-input-end) + (beginning-of-line 0) + (set-window-start (selected-window) (point)) + (if (pos-visible-in-window-p pos) + (goto-char pos) + (comint-skip-prompt)))) (defun comint-interrupt-subjob () "Interrupt the current subjob." @@ -890,41 +1422,62 @@ (defun comint-kill-input () "Kill all text from last stuff output by interpreter to point." (interactive) - (let* ((pmark (process-mark (get-buffer-process (current-buffer)))) - (p-pos (marker-position pmark))) - (if (> (point) p-pos) + (let ((pmark (process-mark (get-buffer-process (current-buffer))))) + (if (> (point) (marker-position pmark)) (kill-region pmark (point))))) (defun comint-delchar-or-maybe-eof (arg) - "Delete ARG characters forward, or send an EOF to process if at end of buffer." + "Delete ARG characters forward, or (if at eob) send an EOF to subprocess." (interactive "p") (if (eobp) (process-send-eof) - (delete-char arg))) + (delete-char arg))) (defun comint-send-eof () "Send an EOF to the current buffer's process." (interactive) (process-send-eof)) + +(defun comint-backward-matching-input (regexp arg) + "Search backward through buffer for match for REGEXP. +Matches are searched for on lines that match `comint-prompt-regexp'. +With prefix argument N, search for Nth previous match. +If N is negative, find the next or Nth next match." + (interactive (comint-regexp-arg "Backward input matching (regexp): ")) + (let* ((re (concat comint-prompt-regexp ".*" regexp)) + (pos (save-excursion (end-of-line (if (> arg 0) 0 1)) + (if (re-search-backward re nil t arg) + (point))))) + (if (null pos) + (progn (message "Not found") + (ding)) + (goto-char pos) + (comint-bol nil)))) + +(defun comint-forward-matching-input (regexp arg) + "Search forward through buffer for match for REGEXP. +Matches are searched for on lines that match `comint-prompt-regexp'. +With prefix argument N, search for Nth following match. +If N is negative, find the previous or Nth previous match." + (interactive (comint-regexp-arg "Forward input matching (regexp): ")) + (comint-backward-matching-input regexp (- arg))) + + (defun comint-next-prompt (n) - "\ -Move to end of next prompt in the buffer (with prefix arg, Nth next). + "Move to end of Nth next prompt in the buffer. See `comint-prompt-regexp'." (interactive "p") - (re-search-forward comint-prompt-regexp nil nil n)) + (let ((paragraph-start comint-prompt-regexp)) + (end-of-line (if (> n 0) 1 0)) + (forward-paragraph n) + (comint-skip-prompt))) -(defun comint-prev-prompt (n) - "\ -Move to end of previous prompt in the buffer (with prefix arg, Nth previous). +(defun comint-previous-prompt (n) + "Move to end of Nth previous prompt in the buffer. See `comint-prompt-regexp'." (interactive "p") - (if (= (save-excursion (re-search-backward comint-prompt-regexp nil t) - (match-end 0)) - (point)) - (setq n (1+ n))) - (re-search-backward comint-prompt-regexp nil nil n) - (goto-char (match-end 0))) + (comint-next-prompt (- n))) ;;; Support for source-file processing commands. ;;;============================================================================ @@ -1009,8 +1562,7 @@ (let ((buff (get-file-buffer fname))) (if (and buff (buffer-modified-p buff) - (y-or-n-p (format "Save buffer %s first? " - (buffer-name buff)))) + (y-or-n-p (format "Save buffer %s first? " (buffer-name buff)))) ;; save BUFF. (let ((old-buffer (current-buffer))) (set-buffer buff) @@ -1112,148 +1664,319 @@ ;; I don't know why. Wizards invited to improve it. (if (not (pos-visible-in-window-p proc-pt proc-win)) (let ((opoint (window-point proc-win))) - (set-window-point proc-win proc-mark) (sit-for 0) + (set-window-point proc-win proc-mark) + (sit-for 0) (if (not (pos-visible-in-window-p opoint proc-win)) (push-mark opoint) - (set-window-point proc-win opoint))))))) + (set-window-point proc-win opoint))))))) -;;; Filename completion in a buffer +;;; Filename/command/history completion in a buffer ;;; =========================================================================== ;;; Useful completion functions, courtesy of the Ergo group. -;;; Three commands: -;;; comint-dynamic-complete Complete filename at point. -;;; comint-dynamic-list-completions List completions in help buffer. +;;; Six functions: +;;; comint-dynamic-complete Complete or expand command, filename, +;;; history at point. +;;; comint-dynamic-complete-filename Complete filename at point. +;;; comint-dynamic-complete-variable Complete variable at point. +;;; comint-dynamic-list-filename-completions List completions in help buffer. ;;; comint-replace-by-expanded-filename Expand and complete filename at point; ;;; replace with expanded/completed name. +;;; comint-dynamic-simple-complete Complete stub given candidates. + +;;; Four hooks (defined above): +;;; comint-dynamic-complete-filename-command Complete file name at point. +;;; comint-dynamic-complete-command-command Complete command at point. +;;; comint-get-current-command Return command at point. +;;; comint-after-partial-filename-command Return non-nil if after file. ;;; These are not installed in the comint-mode keymap. But they are ;;; available for people who want them. Shell-mode installs them: ;;; (define-key shell-mode-map "\t" 'comint-dynamic-complete) -;;; (define-key shell-mode-map "\M-?" 'comint-dynamic-list-completions))) +;;; (define-key shell-mode-map "\M-?" +;;; 'comint-dynamic-list-filename-completions))) ;;; ;;; Commands like this are fine things to put in load hooks if you ;;; want them present in specific modes. +(defvar comint-completion-autolist nil + "*If non-nil, automatically list possiblities on partial completion. +This mirrors the optional behaviour of the tcsh.") -(defun comint-match-partial-pathname () - "Return the filename at point, or signal an error." +(defvar comint-completion-addsuffix t + "*If non-nil, add a `/' to completed directories, ` ' to file names. +This mirrors the optional behaviour of the tcsh.") + +(defvar comint-completion-recexact nil + "*If non-nil, use shortest completion if characters cannot be added. +This mirrors the optional behaviour of the tcsh. + +A non-nil value is useful if `comint-completion-autolist' is non-nil too.") + +(defvar comint-file-name-prefix "" + "Prefix prepended to absolute file names taken from process input. +This is used by comint's and shell's completion functions, and by shell's +directory tracking functions.") + + +(defun comint-directory (directory) + ;; Return expanded DIRECTORY, with `comint-file-name-prefix' if absolute. + (expand-file-name (if (file-name-absolute-p directory) + (concat comint-file-name-prefix directory) + directory))) + + +(defun comint-match-partial-filename () + "Return the filename at point, or signal an error. +Environment variables are substituted." (save-excursion - (if (re-search-backward "[^~/A-Za-z0-9_.$#,=-]" nil 'move) + (if (re-search-backward "[^~/A-Za-z0-9_.$#,={}()-]" nil 'move) (forward-char 1)) ;; Anchor the search forwards. - (if (not (looking-at "[~/A-Za-z0-9_.$#,=-]")) (error "")) - (re-search-forward "[~/A-Za-z0-9_.$#,=-]+") + (if (not (looking-at "[~/A-Za-z0-9_.$#,={}()-]")) (error "")) + (re-search-forward "[~/A-Za-z0-9_.$#,={}()-]+") (substitute-in-file-name (buffer-substring (match-beginning 0) (match-end 0))))) -(defvar comint-filename-prefix nil - "Prefix prepended to all absolute file names taken from process input. -This is used by the completion functions, and by directory tracking in shell -mode.") + +(defun comint-match-partial-variable () + "Return the variable at point, or signal an error." + (save-excursion + (if (re-search-backward "[^A-Za-z0-9_${}]" nil 'move) + (forward-char 1)) + ;; Anchor the search forwards. + (if (not (looking-at "\\$")) (error "")) + (re-search-forward "\\${?[A-Za-z0-9_]+}?") + (buffer-substring (match-beginning 0) (match-end 0)))) -(defun comint-replace-by-expanded-filename () - "Expand the filename at point. -Replace the filename with an expanded, canonicalised, and completed - replacement. -\"Expanded\" means environment variables (e.g., $HOME) and ~'s are -replaced with the corresponding directories. \"Canonicalised\" means .. -and \. are removed, and the filename is made absolute instead of relative. -See functions `expand-file-name' and `substitute-in-file-name'. See also -`comint-dynamic-complete'." - (interactive) - (let* ((pathname (comint-match-partial-pathname)) - (pathdir (file-name-directory pathname)) - (pathnondir (file-name-nondirectory pathname)) - (completion (file-name-completion - pathnondir - (if pathdir - ;; It is important to expand PATHDIR because - ;; default-directory might be a handled name, and - ;; the unexpanded PATHDIR won't necessarily match - ;; the handler regexp. - (expand-file-name (concat - (if (file-name-absolute-p pathdir) - comint-filename-prefix) - pathdir)) - default-directory)))) - (cond ((null completion) - (message "No completions of %s" pathname) - (ding)) - ((eql completion t) - (message "Sole completion")) - (t ; this means a string was returned. - (delete-region (match-beginning 0) (match-end 0)) - (insert (expand-file-name (concat pathdir completion))))))) + +(defun comint-after-partial-filename () + "Returns t if point is after a file name. +File names are assumed to contain `/'s or not be the first item in the input. + +See also `comint-bol'." + (let ((filename (comint-match-partial-filename))) + (or (save-match-data (string-match "/" filename)) + (not (eq (match-beginning 0) + (save-excursion (comint-bol nil) (point))))))) (defun comint-dynamic-complete () + "Dynamically complete/expand the command/filename/history at point. +If the text contains (a non-absolute line reference) `!' or `^' and +`comint-input-autoexpand' is non-nil, then an attempt is made to complete the +history. The value of the variable `comint-after-partial-filename-command' is +used to match file names. Otherwise, an attempt is made to complete the +command. + +See also the variables `comint-after-partial-filename-command', +`comint-dynamic-complete-filename-command', and +`comint-dynamic-complete-command-command', and functions +`comint-replace-by-expanded-history' and `comint-magic-space'." + (interactive) + (let ((previous-modified-tick (buffer-modified-tick))) + (if (and comint-input-autoexpand + (string-match "[!^]" (funcall comint-get-current-command))) + ;; Looks like there might be history references in the command. + (comint-replace-by-expanded-history)) + (if (= previous-modified-tick (buffer-modified-tick)) + ;; No references were expanded, so maybe they were none after all. + (cond ((funcall comint-after-partial-filename-command) + ;; It's a file name. + (funcall comint-dynamic-complete-filename-command)) + (t + ;; Assume it's a command. + (funcall comint-dynamic-complete-command-command)))))) + + +(defun comint-dynamic-complete-filename () "Dynamically complete the filename at point. -This function is similar to `comint-replace-by-expanded-filename', except -that it won't change parts of the filename already entered in the buffer; -it just adds completion characters to the end of the filename." +This function is similar to `comint-replace-by-expanded-filename', except that +it won't change parts of the filename already entered in the buffer; it just +adds completion characters to the end of the filename. A completions listing +may be shown in a help buffer if completion is ambiguous. + +Completion is dependent on the value of `comint-completion-addsuffix' and +`comint-completion-recexact', and the timing of completions listing is +dependent on the value of `comint-completion-autolist'." (interactive) - (if (and (interactive-p) - (eq last-command this-command)) - ;; If you hit TAB twice in a row, you get a completion list. - (comint-dynamic-list-completions) - (let* ((pathname (comint-match-partial-pathname)) - (pathdir (file-name-directory pathname)) - (pathnondir (file-name-nondirectory pathname)) - (completion (file-name-completion - pathnondir - (if pathdir - ;; It is important to expand PATHDIR because - ;; default-directory might be a handled name, and - ;; the unexpanded PATHDIR won't necessarily match - ;; the handler regexp. - (expand-file-name - (concat (if (file-name-absolute-p pathdir) - comint-filename-prefix) - pathdir)) - default-directory)))) - (cond ((null completion) - (message "No completions of %s" pathname) - (ding)) - ((eql completion t) - (message "Sole completion")) - (t ; this means a string was returned. - (goto-char (match-end 0)) - (insert (substring completion (length pathnondir)))))))) + (let* ((completion-ignore-case nil) + (filename (comint-match-partial-filename)) + (pathdir (file-name-directory filename)) + (pathnondir (file-name-nondirectory filename)) + (directory (if pathdir (comint-directory pathdir) default-directory)) + (completion (file-name-completion pathnondir directory))) + (cond ((null completion) + (message "No completions of %s" filename) + (ding)) + ((eq completion t) ; Means already completed "file". + (if comint-completion-addsuffix (insert " ")) + (message "Sole completion")) + ((string-equal completion "") ; Means completion on "directory/". + (comint-dynamic-list-filename-completions)) + (t ; Completion string returned. + (let ((file (concat (file-name-as-directory directory) completion))) + (goto-char (match-end 0)) + (insert (substring (directory-file-name completion) + (length pathnondir))) + (cond ((symbolp (file-name-completion completion directory)) + ;; We inserted a unique completion. + (if comint-completion-addsuffix + (insert (if (file-directory-p file) "/" " "))) + (message "Completed")) + ((and comint-completion-recexact comint-completion-addsuffix + (string-equal pathnondir completion) + (file-exists-p file)) + ;; It's not unique, but user wants shortest match. + (insert (if (file-directory-p file) "/" " ")) + (message "Completed shortest")) + ((or comint-completion-autolist + (string-equal pathnondir completion)) + ;; It's not unique, list possible completions. + (comint-dynamic-list-filename-completions)) + (t + (message "Partially completed")))))))) + + +(defun comint-replace-by-expanded-filename () + "Dynamically expand and complete the filename at point. +Replace the filename with an expanded, canonicalised and completed replacement. +\"Expanded\" means environment variables (e.g., $HOME) and `~'s are replaced +with the corresponding directories. \"Canonicalised\" means `..' and `.' are +removed, and the filename is made absolute instead of relative. For expansion +see `expand-file-name' and `substitute-in-file-name'. For completion see +`comint-dynamic-complete-filename'." + (interactive) + (replace-match (expand-file-name (comint-match-partial-filename)) t t) + (comint-dynamic-complete-filename)) + + +(defun comint-dynamic-complete-variable () + "Dynamically complete the environment variable at point. +This function is similar to `comint-dynamic-complete-filename', except that it +searches `process-environment' for completion candidates. Note that this may +not be the same as the interpreter's idea of variable names. The main +problem with this type of completion is that `process-environment' is the +environment which Emacs started with. Emacs does not track changes to the +environment made by the interpreter. Perhaps it would be more accurate if this +function was called `comint-dynamic-complete-process-environment-variable'. -(defun comint-dynamic-list-completions () - "List in help buffer all possible completions of the filename at point." +See also `comint-dynamic-complete-filename'." (interactive) - (let* ((pathname (comint-match-partial-pathname)) - (pathdir (file-name-directory pathname)) - (pathnondir (file-name-nondirectory pathname)) - (completions - (file-name-all-completions - pathnondir - (if pathdir - ;; It is important to expand PATHDIR because - ;; default-directory might be a handled name, and - ;; the unexpanded PATHDIR won't necessarily match - ;; the handler regexp. - (expand-file-name - (concat (if (file-name-absolute-p pathdir) - comint-filename-prefix) - pathdir)) - default-directory)))) + (let* ((completion-ignore-case nil) + (variable (comint-match-partial-variable)) + (varname (substring variable (string-match "[^$({]" variable))) + (protection (cond ((string-match "{" variable) "}") + ((string-match "(" variable) ")") + (t ""))) + (variables (mapcar (function (lambda (x) + (list (substring x 0 (string-match "=" x))))) + process-environment)) + (var-directory-p + (function (lambda (var) + (file-directory-p + (comint-directory (substitute-in-file-name (concat "$" var))))))) + (completions (all-completions varname variables))) + ;; Complete variable as if its value were a filename (which it might be). (cond ((null completions) - (message "No completions of %s" pathname) - (ding)) - (t - (let ((conf (current-window-configuration))) - (with-output-to-temp-buffer "*Help*" - (display-completion-list completions)) - (sit-for 0) - (message "Hit space to flush") - (let ((ch (read-event))) - (if (eq ch ?\ ) - (set-window-configuration conf) - (setq unread-command-events (list ch))))))))) + (message "No completions of %s" varname) + (ding)) + ((= 1 (length completions)) ; Gotcha! + (let ((completion (car completions))) + (if (string-equal completion varname) + (message "Sole completion") + (insert (substring (directory-file-name completion) + (length varname))) + (message "Completed")) + (insert protection) + (if comint-completion-addsuffix + (insert (if (funcall var-directory-p completion) "/" " "))))) + (t ; There's no unique completion. + (let ((completion (try-completion varname variables))) + ;; Insert the longest substring. + (insert (substring (directory-file-name completion) + (length varname))) + (cond ((and comint-completion-recexact comint-completion-addsuffix + (string-equal varname completion) + (member completion completions)) + ;; It's not unique, but user wants shortest match. + (insert protection + (if (funcall var-directory-p completion) "/" " ")) + (message "Completed shortest")) + ((or comint-completion-autolist + (string-equal varname completion)) + ;; It's not unique, list possible completions. + (comint-dynamic-list-completions completions)) + (t + (message "Partially completed")))))))) + + +(defun comint-dynamic-simple-complete (stub candidates) + "Dynamically complete STUB from CANDIDATES list. +This function inserts completion characters at point by completing STUB from +the strings in CANDIDATES. A completions listing may be shown in a help buffer +if completion is ambiguous. + +See also `comint-dynamic-complete-filename'." + (let* ((completion-ignore-case nil) + (candidates (mapcar (function (lambda (x) (list x))) candidates)) + (completions (all-completions stub candidates))) + (cond ((null completions) + (message "No completions of %s" stub) + (ding)) + ((= 1 (length completions)) ; Gotcha! + (let ((completion (car completions))) + (if (string-equal completion stub) + (message "Sole completion") + (insert (substring completion (length stub))) + (message "Completed")) + (if comint-completion-addsuffix (insert " ")))) + (t ; There's no unique completion. + (let ((completion (try-completion stub candidates))) + ;; Insert the longest substring. + (insert (substring completion (length stub))) + (cond ((and comint-completion-recexact comint-completion-addsuffix + (string-equal stub completion) + (member completion completions)) + ;; It's not unique, but user wants shortest match. + (insert " ") + (message "Completed shortest")) + ((or comint-completion-autolist + (string-equal stub completion)) + ;; It's not unique, list possible completions. + (comint-dynamic-list-completions completions)) + (t + (message "Partially completed")))))))) + + +(defun comint-dynamic-list-filename-completions () + "List in help buffer possible completions of the filename at point." + (interactive) + (let* ((completion-ignore-case nil) + (filename (comint-match-partial-filename)) + (pathdir (file-name-directory filename)) + (pathnondir (file-name-nondirectory filename)) + (directory (if pathdir (comint-directory pathdir) default-directory)) + (completions (file-name-all-completions pathnondir directory))) + (if completions + (comint-dynamic-list-completions completions) + (message "No completions of %s" filename) + (ding)))) + + +(defun comint-dynamic-list-completions (completions) + "List in help buffer sorted COMPLETIONS. +Typing SPC flushes the help buffer." + (let ((conf (current-window-configuration))) + (with-output-to-temp-buffer " *Completions*" + (display-completion-list (sort completions 'string-lessp))) + (sit-for 0) + (message "Hit space to flush") + (let ((ch (read-event))) + (if (eq ch ?\ ) + (set-window-configuration conf) + (setq unread-command-events (list ch)))))) ;;; Converting process modes to use comint mode ;;; =========================================================================== @@ -1318,7 +2041,7 @@ ;;; (setq shell-mode-map (full-copy-sparse-keymap comint-mode-map)) ;;; (define-key shell-mode-map "\M-\t" 'comint-dynamic-complete) ;;; (define-key shell-mode-map "\M-?" -;;; 'comint-dynamic-list-completions))) +;;; 'comint-dynamic-list-filename-completions))) ;;; (use-local-map shell-mode-map) ;;; (make-local-variable 'shell-directory-stack) ;;; (setq shell-directory-stack nil) @@ -1332,133 +2055,25 @@ ;;; $ESHELL, $SHELL, or /bin/sh. If you give make-comint a program argument ;;; of NIL, it barfs. Adjust your code accordingly... ;;; +;;; Completion for comint-mode users +;;; +;;; For modes that use comint-mode, comint-after-partial-filename-command +;;; should be set to a function that returns t if the stub before point is to +;;; be treated as a filename. By default, if the stub contains a `/', or does +;;; not follow the prompt, comint-dynamic-complete-filename-command is called. +;;; Otherwise, comint-dynamic-complete-command-command is called. This should +;;; also be set to a function that completes whatever the mode calls commands. +;;; You could use comint-dynamic-simple-complete to do the bulk of the +;;; completion job. ;;; Do the user's customisation... - -(defvar comint-load-hook nil - "This hook is run when comint is loaded in. -This is a good place to put keybindings.") - -(run-hooks 'comint-load-hook) - -;;; Change log: -;;; 9/12/89 -;;; - Souped up the filename expansion procedures. -;;; Doc strings are much clearer and more detailed. -;;; Fixed a bug where doing a filename completion when the point -;;; was in the middle of the filename instead of at the end would lose. ;;; -;;; 2/17/90 -;;; - Souped up the command history stuff so that text inserted -;;; by comint-previous-input-matching is removed by following -;;; command history recalls. comint-next/previous-input-matching -;;; is now much more smoothly integrated w/the command history stuff. -;;; - Added comint-eol-on-send flag and comint-input-sender hook. -;;; Comint-input-sender based on code contributed by Jeff Peck -;;; (peck@sun.com). -;;; -;;; 3/13/90 ccm@cmu.cs.edu -;;; - Added comint-previous-similar-input for looking up similar inputs. -;;; - Added comint-send-and-get-output to allow snarfing input from -;;; buffer. -;;; - Added the ability to pick up a source file by positioning over -;;; a string in comint-get-source. -;;; - Added add-hook to make it a little easier for the user to use -;;; multiple hooks. -;;; -;;; 5/22/90 shivers -;;; - Moved Chris' multiplexed ipc stuff to comint-ipc.el. -;;; - Altered Chris' comint-get-source string feature. The string -;;; is only offered as a default if it names an existing file. -;;; - Changed comint-exec to directly crank up the process, instead -;;; of calling the env program. This made background.el happy. -;;; - Added new buffer-local var comint-ptyp. The problem is that -;;; the signalling functions don't work as advertised. If you are -;;; communicating via pipes, the CURRENT-GROUP arg is supposed to -;;; be ignored, but, unfortunately it seems to be the case that you -;;; must pass a NIL for this arg in the pipe case. COMINT-PTYP -;;; is a flag that tells whether the process is communicating -;;; via pipes or a pty. The comint signalling functions use it -;;; to determine the necessary CURRENT-GROUP arg value. The bug -;;; has been reported to the Gnu folks. -;;; - comint-dynamic-complete flushes the help window if you hit space -;;; after you execute it. -;;; - Added functions comint-send-string, comint-send-region and var -;;; comint-input-chunk-size. comint-send-string tries to prevent processes -;;; from hanging when you send them long strings by breaking them into -;;; chunks and allowing process output between chunks. I got the idea from -;;; Eero Simoncelli's Common Lisp package. Note that using -;;; comint-send-string means that the process buffer's contents can change -;;; during a call! If you depend on process output only happening between -;;; toplevel commands, this could be a problem. In such a case, use -;;; process-send-string instead. If this is a problem for people, I'd like -;;; to hear about it. -;;; - Added comint-proc-query as a simple mechanism for commands that -;;; want to query an inferior process and display its response. For a -;;; typical use, see lisp-show-arglist in cmulisp.el. -;;; - Added constant comint-version, which is now "2.01". -;;; -;;; 6/14/90 shivers -;;; - Had comint-update-env defined twice. Removed extra copy. Also -;;; renamed mem to be comint-mem, for modularity. The duplication -;;; was reported by Michael Meissner. -;;; 6/16/90 shivers -;;; - Emacs has two different mechanisms for maintaining the process -;;; environment, determined at compile time by the MAINTAIN-ENVIRONMENT -;;; #define. One uses the process-environment global variable, and -;;; one uses a getenv/setenv interface. comint-exec assumed the -;;; process-environment interface; it has been generalised (with -;;; comint-exec-1) to handle both cases. Pretty bogus. We could, -;;; of course, skip all this and just use the etc/env program to -;;; handle the environment tweaking, but that obscures process -;;; queries that other modules (like background.el) depend on. etc/env -;;; is also fairly bogus. This bug, and some of the fix code was -;;; reported by Dan Pierson. -;;; -;;; 9/5/90 shivers -;;; - Changed make-variable-buffer-local's to make-local-variable's. -;;; This leaves non-comint-mode buffers alone. Stephane Payrard -;;; reported the sloppy usage. -;;; - You can now go from comint-previous-similar-input to -;;; comint-previous-input with no problem. -;;; -;;; 12/21/90 shivers -;;; - Added a condition-case to comint-get-source. Bogus strings -;;; beginning with ~ were making the file-exists-p barf. -;;; - Added "=" to the set of chars recognised by file completion -;;; as constituting a filename. -;;; -;;; 1/90 shivers -;;; These changes comprise release 2.02: -;;; - Removed the kill-all-local-variables in comint-mode. This -;;; made it impossible for client modes to set things before calling -;;; comint-mode. (In particular, it messed up ilisp.el) In general, -;;; the client mode should be responsible for a k-a-l-v's. -;;; - Fixed comint-match-partial-pathname so that it works in -;;; more cases: if the filename begins at the start-of-buffer; -;;; if point is on the first char of the filename. Just a question -;;; of getting the tricky bits right. -;;; - Added a hook, comint-exec-hook that is run each time a process -;;; is cranked up. Useful for things like process-kill-without-query. -;;; -;;; These two were pointed out by tale: -;;; - Improved the doc string in comint-send-input a little bit. -;;; - Tweaked make-comint to check process status with comint-check-proc -;;; instead of equivalent inline code. -;;; -;;; - Prompt-search history commands have been commented out. I never -;;; liked them; I don't think anyone used them. -;;; - Made comint-exec-hook a local var, as it should have been. -;;; (This way, for instance, you can have shell procs kill-w/o-query, -;;; but let Scheme procs be default.) -;;; -;;; 7/91 Shivers -;;; - Souped up comint-read-noecho with an optional argument, STARS. -;;; Suggested by mjlx@EAGLE.CNSF.CORNELL.EDU. -;;; - Moved comint-previous-input-matching from C-c r to C-M-r. -;;; C-c <letter> bindings are reserved for the user. -;;; These bindings were done by Jim Blandy. -;;; These changes comprise version 2.03. +;;; Isn't this what eval-after-load is for? +;;;(defvar comint-load-hook nil +;;; "This hook is run when comint is loaded in. +;;;This is a good place to put keybindings.") +;;; +;;;(run-hooks 'comint-load-hook) (provide 'comint)