changeset 60010:65f9ec90583b

Change @LaTeX to La@TeX throughout.

--- a/man/calc.texi	Thu Feb 10 06:51:28 2005 +0000
+++ b/man/calc.texi	Thu Feb 10 18:54:10 2005 +0000
@@ -48,9 +48,6 @@
 @macro cpiover{den}
 @expr{pi/\den\}
 @end macro
-@macro LaTeX{}
-La@TeX{}
-@end macro
 @end ifnottex
 
 
@@ -739,7 +736,7 @@
 Type @kbd{d B} to view the solutions in more readable notation.
 Type @w{@kbd{d C}} to view them in C language notation, @kbd{d T}
 to view them in the notation for the @TeX{} typesetting system,
-and @kbd{d L} to view them in the notation for the @LaTeX{} typesetting
+and @kbd{d L} to view them in the notation for the La@TeX{} typesetting
 system.  Type @kbd{d N} to return to normal notation.
 
 @noindent
@@ -1124,7 +1121,7 @@
 Calc has added annotations to the file to help it remember the modes
 that were used for this formula.  They are formatted like comments
 in the @TeX{} typesetting language, just in case you are using @TeX{} or
-@LaTeX{}. (In this example @TeX{} is not being used, so you might want
+La@TeX{}. (In this example @TeX{} is not being used, so you might want
 to move these comments up to the top of the file or otherwise put them
 out of the way.)
 
@@ -5221,7 +5218,7 @@
 Here things like powers, square roots, and quotients and fractions
 are displayed in a two-dimensional pictorial form.  Calc has other
 language modes as well, such as C mode, FORTRAN mode, @TeX{} mode
-and @LaTeX{} mode.
+and La@TeX{} mode.
 
 @smallexample
 @group
@@ -13925,7 +13922,7 @@
 @noindent
 The commands in this section change Calc to use a different notation for
 entry and display of formulas, corresponding to the conventions of some
-other common language such as Pascal or @LaTeX{}.  Objects displayed on the
+other common language such as Pascal or La@TeX{}.  Objects displayed on the
 stack or yanked from the Calculator to an editing buffer will be formatted
 in the current language; objects entered in algebraic entry or yanked from
 another buffer will be interpreted according to the current language.
@@ -13950,10 +13947,10 @@
 and would have written the formula back with notations (like implicit
 multiplication) which would not have been legal for a C program.
 
-As another example, suppose you are maintaining a C program and a @LaTeX{}
+As another example, suppose you are maintaining a C program and a La@TeX{}
 document, each of which needs a copy of the same formula.  You can grab the
-formula from the program in C mode, switch to @LaTeX{} mode, and yank the
-formula into the document in @LaTeX{} math-mode format.
+formula from the program in C mode, switch to La@TeX{} mode, and yank the
+formula into the document in La@TeX{} math-mode format.
 
 Language modes are selected by typing the letter @kbd{d} followed by a
 shifted letter key.
@@ -14147,7 +14144,7 @@
 convert to lower-case for display and input.
 
 @node TeX and LaTeX Language Modes, Eqn Language Mode, C FORTRAN Pascal, Language Modes
-@subsection @TeX{} and @LaTeX{} Language Modes
+@subsection @TeX{} and La@TeX{} Language Modes
 
 @noindent
 @kindex d T
@@ -14159,38 +14156,38 @@
 The @kbd{d T} (@code{calc-tex-language}) command selects the conventions
 of ``math mode'' in Donald Knuth's @TeX{} typesetting language,
 and the @kbd{d L} (@code{calc-latex-language}) command selects the
-conventions of ``math mode'' in @LaTeX{}, a typesetting language that
-uses @TeX{} as its formatting engine.  Calc's @LaTeX{} language mode can
-read any formula that the @TeX{} language mode can, although @LaTeX{}
+conventions of ``math mode'' in La@TeX{}, a typesetting language that
+uses @TeX{} as its formatting engine.  Calc's La@TeX{} language mode can
+read any formula that the @TeX{} language mode can, although La@TeX{}
 mode may display it differently.
 
 Formulas are entered and displayed in the appropriate notation;
 @texline @math{\sin(a/b)}
 @infoline @expr{sin(a/b)}
 will appear as @samp{\sin\left( a \over b \right)} in @TeX{} mode and
-@samp{\sin\left(\frac@{a@}@{b@}\right)} in @LaTeX{} mode.
+@samp{\sin\left(\frac@{a@}@{b@}\right)} in La@TeX{} mode.
 Math formulas are often enclosed by @samp{$ $} signs in @TeX{} and
-@LaTeX{}; these should be omitted when interfacing with Calc.  To Calc,
+La@TeX{}; these should be omitted when interfacing with Calc.  To Calc,
 the @samp{$} sign has the same meaning it always does in algebraic
 formulas (a reference to an existing entry on the stack).
 
 Complex numbers are displayed as in @samp{3 + 4i}.  Fractions and
 quotients are written using @code{\over} in @TeX{} mode (as in 
-@code{@{a \over b@}}) and @code{\frac} in @LaTeX{} mode (as in
+@code{@{a \over b@}}) and @code{\frac} in La@TeX{} mode (as in
 @code{\frac@{a@}@{b@}});  binomial coefficients are written with
 @code{\choose} in @TeX{} mode (as in @code{@{a \choose b@}}) and
-@code{\binom} in @LaTeX{} mode (as in @code{\binom@{a@}@{b@}}).
+@code{\binom} in La@TeX{} mode (as in @code{\binom@{a@}@{b@}}).
 Interval forms are written with @code{\ldots}, and error forms are
 written with @code{\pm}. Absolute values are written as in 
 @samp{|x + 1|}, and the floor and ceiling functions are written with
 @code{\lfloor}, @code{\rfloor}, etc. The words @code{\left} and
-@code{\right} are ignored when reading formulas in @TeX{} and @LaTeX{}
+@code{\right} are ignored when reading formulas in @TeX{} and La@TeX{}
 modes.  Both @code{inf} and @code{uinf} are written as @code{\infty};
 when read, @code{\infty} always translates to @code{inf}.
 
 Function calls are written the usual way, with the function name followed
 by the arguments in parentheses.  However, functions for which @TeX{}
-and @LaTeX{} have special names (like @code{\sin}) will use curly braces
+and La@TeX{} have special names (like @code{\sin}) will use curly braces
 instead of parentheses for very simple arguments.  During input, curly
 braces and parentheses work equally well for grouping, but when the
 document is formatted the curly braces will be invisible.  Thus the
@@ -14201,14 +14198,14 @@
 @texline @math{\sin(2 + x)}.
 @infoline @expr{sin(2 + x)}.
 
-Function and variable names not treated specially by @TeX{} and @LaTeX{}
+Function and variable names not treated specially by @TeX{} and La@TeX{}
 are simply written out as-is, which will cause them to come out in
 italic letters in the printed document.  If you invoke @kbd{d T} or
 @kbd{d L} with a positive numeric prefix argument, names of more than
 one character will instead be enclosed in a protective commands that
 will prevent them from being typeset in the math italics; they will be
 written @samp{\hbox@{@var{name}@}} in @TeX{} mode and 
-@samp{\text@{@var{name}@}} in @LaTeX{} mode.  The
+@samp{\text@{@var{name}@}} in La@TeX{} mode.  The
 @samp{\hbox@{ @}} and @samp{\text@{ @}} notations are ignored during
 reading.  If you use a negative prefix argument, such function names are
 written @samp{\@var{name}}, and function names that begin with @code{\} during
@@ -14219,7 +14216,7 @@
 
 During reading, text of the form @samp{\matrix@{ ...@: @}} is replaced
 by @samp{[ ...@: ]}.  The same also applies to @code{\pmatrix} and
-@code{\bmatrix}.  In @LaTeX{} mode this also applies to 
+@code{\bmatrix}.  In La@TeX{} mode this also applies to 
 @samp{\begin@{matrix@} ... \end@{matrix@}},
 @samp{\begin@{bmatrix@} ... \end@{bmatrix@}},
 @samp{\begin@{pmatrix@} ... \end@{pmatrix@}}, as well as
@@ -14229,7 +14226,7 @@
 During output, matrices are displayed in @samp{\matrix@{ a & b \\ c & d@}}
 format in @TeX{} mode and in 
 @samp{\begin@{pmatrix@} a & b \\ c & d \end@{pmatrix@}} format in
-@LaTeX{} mode; you may need to edit this afterwards to change to your
+La@TeX{} mode; you may need to edit this afterwards to change to your
 preferred matrix form.  If you invoke @kbd{d T} or @kbd{d L} with an
 argument of 2 or -2, then matrices will be displayed in two-dimensional
 form, such as 
@@ -14253,7 +14250,7 @@
 @end example
 
 @noindent
-While this wouldn't bother Calc, it is incorrect @LaTeX{}.
+While this wouldn't bother Calc, it is incorrect La@TeX{}.
 (Similarly for @TeX{}.)
 
 Accents like @code{\tilde} and @code{\bar} translate into function
@@ -14261,7 +14258,7 @@
 sequence is treated as an accent.  The @code{\vec} accent corresponds
 to the function name @code{Vec}, because @code{vec} is the name of
 a built-in Calc function.  The following table shows the accents
-in Calc, @TeX{}, @LaTeX{} and @dfn{eqn} (described in the next section):
+in Calc, @TeX{}, La@TeX{} and @dfn{eqn} (described in the next section):
 
 @iftex
 @begingroup
@@ -14436,7 +14433,7 @@
 @end example
 
 Note that, because these symbols are ignored, reading a @TeX{} or
-@LaTeX{} formula into Calc and writing it back out may lose spacing and
+La@TeX{} formula into Calc and writing it back out may lose spacing and
 font information. 
 
 Also, the ``discretionary multiplication sign'' @samp{\*} is read
@@ -14607,7 +14604,7 @@
 symbol (these are used to introduce spaces of various widths into
 the typeset output of @dfn{eqn}).
 
-As in @LaTeX{} mode, Calc's formatter omits parentheses around the
+As in La@TeX{} mode, Calc's formatter omits parentheses around the
 arguments of functions like @code{ln} and @code{sin} if they are
 ``simple-looking''; in this case Calc surrounds the argument with
 braces, separated by a @samp{~} from the function name: @samp{sin~@{x@}}.
@@ -15939,7 +15936,7 @@
 @TeX{} language mode (@kbd{d T}; @pxref{TeX and LaTeX Language Modes}).
 
 @item LaTeX
-@LaTeX{} language mode (@kbd{d L}; @pxref{TeX and LaTeX Language Modes}).
+La@TeX{} language mode (@kbd{d L}; @pxref{TeX and LaTeX Language Modes}).
 
 @item Eqn
 @dfn{Eqn} language mode (@kbd{d E}; @pxref{Eqn Language Mode}).
@@ -28353,7 +28350,7 @@
 @cindex @samp{=>} operator
 The special algebraic symbol @samp{=>} is known as the @dfn{evaluates-to
 operator}.  (It will show up as an @code{evalto} function call in
-other language modes like Pascal and @LaTeX{}.)  This is a binary
+other language modes like Pascal and La@TeX{}.)  This is a binary
 operator, that is, it has a lefthand and a righthand argument,
 although it can be entered with the righthand argument omitted.
 
@@ -30008,16 +30005,16 @@
 When Embedded mode ``activates'' a formula, i.e., when it examines
 the formula for the first time since the buffer was created or
 loaded, Calc tries to sense the language in which the formula was
-written.  If the formula contains any @LaTeX{}-like @samp{\} sequences,
-it is parsed (i.e., read) in @LaTeX{} mode.  If the formula appears to
+written.  If the formula contains any La@TeX{}-like @samp{\} sequences,
+it is parsed (i.e., read) in La@TeX{} mode.  If the formula appears to
 be written in multi-line Big mode, it is parsed in Big mode.  Otherwise,
 it is parsed according to the current language mode.
 
 Note that Calc does not change the current language mode according
-to what it finds.  Even though it can read a @LaTeX{} formula when
-not in @LaTeX{} mode, it will immediately rewrite this formula using
+to what it finds.  Even though it can read a La@TeX{} formula when
+not in La@TeX{} mode, it will immediately rewrite this formula using
 whatever language mode is in effect.  You must then type @kbd{d L}
-to switch Calc permanently into @LaTeX{} mode if that is what you
+to switch Calc permanently into La@TeX{} mode if that is what you
 desire.
 
 @tex
@@ -30038,8 +30035,8 @@
 
 Plain formulas are preceded and followed by @samp{%%%} signs
 by default.  This notation has the advantage that the @samp{%}
-character begins a comment in @TeX{} and @LaTeX{}, so if your formula is 
-embedded in a @TeX{} or @LaTeX{} document its plain version will be
+character begins a comment in @TeX{} and La@TeX{}, so if your formula is 
+embedded in a @TeX{} or La@TeX{} document its plain version will be
 invisible in the final printed copy.  @xref{Customizing
 Embedded Mode}, to see how to change the ``plain'' formula
 delimiters, say to something that @dfn{eqn} or some other
@@ -30329,7 +30326,7 @@
 @noindent
 where the leading and trailing @samp{---} can be replaced by
 any suitable strings (which must be the same on all three lines)
-or omitted altogether; in a @TeX{} or @LaTeX{} file, @samp{%} would be a good
+or omitted altogether; in a @TeX{} or La@TeX{} file, @samp{%} would be a good
 leading string and no trailing string would be necessary.  In a
 C program, @samp{/*} and @samp{*/} would be good leading and
 trailing strings.