Mercurial > emacs

--- a/lisp/ChangeLog	Wed Jun 27 15:56:38 2007 +0000
+++ b/lisp/ChangeLog	Wed Jun 27 18:06:14 2007 +0000
@@ -1,5 +1,16 @@
 2007-06-27  Stefan Monnier  <monnier@iro.umontreal.ca>

+	* textmodes/texinfmt.el (texinfo-raisesections-alist)
+	(texinfo-lowersections-alist): Merge definition and declaration.
+	(texinfo-start-of-header, texinfo-end-of-header): Remove.
+	(texinfo-format-syntax-table): Merge init into declaration.
+	(texinfo-format-parse-line-args, texinfo-format-parse-args)
+	(texinfo-format-parse-defun-args, texinfo-format-node)
+	(texinfo-push-stack, texinfo-multitable-widths)
+	(texinfo-define-info-enclosure, texinfo-alias)
+	(texinfo-format-defindex, batch-texinfo-format): Use push.
+	(texinfo-footnote-number): Remove duplicate declaration.
+
 	* ps-print.el: Update with auto-generated autoloads.

 	* ps-mule.el: Set generated-autoload-file to "ps-print.el".
--- a/lisp/textmodes/texinfmt.el	Wed Jun 27 15:56:38 2007 +0000
+++ b/lisp/textmodes/texinfmt.el	Wed Jun 27 18:06:14 2007 +0000
@@ -57,8 +57,6 @@
 (require 'texinfo)          ; So `texinfo-footnote-style' is defined.
 (require 'texnfo-upd)       ; So `texinfo-section-types-regexp' is defined.

-(defvar texinfo-format-syntax-table nil)
-
 (defvar texinfo-vindex)
 (defvar texinfo-findex)
 (defvar texinfo-cindex)
@@ -81,27 +79,80 @@
 (defvar texinfo-short-index-format-cmds-alist)
 (defvar texinfo-format-filename)
 (defvar texinfo-footnote-number)
-(defvar texinfo-start-of-header)
-(defvar texinfo-end-of-header)
-(defvar texinfo-raisesections-alist)
-(defvar texinfo-lowersections-alist)
+
+(defvar texinfo-raisesections-alist
+  '((@chapter . @chapter)             ; Cannot go higher
+    (@unnumbered . @unnumbered)
+    (@centerchap . @unnumbered)
+
+    (@majorheading . @majorheading)
+    (@chapheading . @chapheading)
+    (@appendix . @appendix)
+
+    (@section . @chapter)
+    (@unnumberedsec . @unnumbered)
+    (@heading . @chapheading)
+    (@appendixsec . @appendix)
+
+    (@subsection . @section)
+    (@unnumberedsubsec . @unnumberedsec)
+    (@subheading . @heading)
+    (@appendixsubsec . @appendixsec)
+
+    (@subsubsection . @subsection)
+    (@unnumberedsubsubsec . @unnumberedsubsec)
+    (@subsubheading . @subheading)
+    (@appendixsubsubsec . @appendixsubsec))
+  "*An alist of next higher levels for chapters, sections, etc...
+For example, section to chapter, subsection to section.
+Used by `texinfo-raise-lower-sections'.
+The keys specify types of section; the values correspond to the next
+higher types.")
+
+(defvar texinfo-lowersections-alist
+  '((@chapter . @section)
+    (@unnumbered . @unnumberedsec)
+    (@centerchap . @unnumberedsec)
+    (@majorheading . @heading)
+    (@chapheading . @heading)
+    (@appendix . @appendixsec)
+
+    (@section . @subsection)
+    (@unnumberedsec . @unnumberedsubsec)
+    (@heading . @subheading)
+    (@appendixsec . @appendixsubsec)
+
+    (@subsection . @subsubsection)
+    (@unnumberedsubsec . @unnumberedsubsubsec)
+    (@subheading . @subsubheading)
+    (@appendixsubsec . @appendixsubsubsec)
+
+    (@subsubsection . @subsubsection) ; Cannot go lower.
+    (@unnumberedsubsubsec . @unnumberedsubsubsec)
+    (@subsubheading . @subsubheading)
+    (@appendixsubsubsec . @appendixsubsubsec))
+  "*An alist of next lower levels for chapters, sections, etc...
+For example, chapter to section, section to subsection.
+Used by `texinfo-raise-lower-sections'.
+The keys specify types of section; the values correspond to the next
+lower types.")

 ;;; Syntax table

-(if texinfo-format-syntax-table
-    nil
-  (setq texinfo-format-syntax-table (make-syntax-table))
-  (modify-syntax-entry ?\" " " texinfo-format-syntax-table)
-  (modify-syntax-entry ?\\ " " texinfo-format-syntax-table)
-  (modify-syntax-entry ?@ "\\" texinfo-format-syntax-table)
-  (modify-syntax-entry ?\^q "\\" texinfo-format-syntax-table)
-  (modify-syntax-entry ?\[ "." texinfo-format-syntax-table)
-  (modify-syntax-entry ?\] "." texinfo-format-syntax-table)
-  (modify-syntax-entry ?\( "." texinfo-format-syntax-table)
-  (modify-syntax-entry ?\) "." texinfo-format-syntax-table)
-  (modify-syntax-entry ?{ "(}" texinfo-format-syntax-table)
-  (modify-syntax-entry ?} "){" texinfo-format-syntax-table)
-  (modify-syntax-entry ?\' "." texinfo-format-syntax-table))
+(defvar texinfo-format-syntax-table
+  (let ((st (make-syntax-table)))
+    (modify-syntax-entry ?\" " " st)
+    (modify-syntax-entry ?\\ " " st)
+    (modify-syntax-entry ?@ "\\" st)
+    (modify-syntax-entry ?\^q "\\" st)
+    (modify-syntax-entry ?\[ "." st)
+    (modify-syntax-entry ?\] "." st)
+    (modify-syntax-entry ?\( "." st)
+    (modify-syntax-entry ?\) "." st)
+    (modify-syntax-entry ?{ "(}" st)
+    (modify-syntax-entry ?} "){" st)
+    (modify-syntax-entry ?\' "." st)
+    st))


 ;;; Top level buffer and region formatting functions
@@ -113,8 +164,8 @@
 name specified in the @setfilename command.

 Non-nil argument (prefix, if interactive) means don't make tag table
-and don't split the file if large.  You can use Info-tagify and
-Info-split to do these manually."
+and don't split the file if large.  You can use `Info-tagify' and
+`Info-split' to do these manually."
   (interactive "P")
   (let ((lastmessage "Formatting Info file...")
 	(coding-system-for-write buffer-file-coding-system))
@@ -329,7 +380,7 @@
 Texinfo source buffer is not changed.

 Non-nil argument (prefix, if interactive) means don't split the file
-if large.  You can use Info-split to do this manually."
+if large.  You can use `Info-split' to do this manually."
   (interactive "P")
   (let ((temp-buffer (concat  "*--" (buffer-name) "--temporary-buffer*" )))
     (message "First updating nodes and menus, then creating Info file.")
@@ -764,64 +815,6 @@
               (setq count (1+ count)))
             (kill-word 1)
             (insert (symbol-name new-level))))))))))
-
-(defvar texinfo-raisesections-alist
-  '((@chapter . @chapter)             ; Cannot go higher
-    (@unnumbered . @unnumbered)
-    (@centerchap . @unnumbered)
-
-    (@majorheading . @majorheading)
-    (@chapheading . @chapheading)
-    (@appendix . @appendix)
-
-    (@section . @chapter)
-    (@unnumberedsec . @unnumbered)
-    (@heading . @chapheading)
-    (@appendixsec . @appendix)
-
-    (@subsection . @section)
-    (@unnumberedsubsec . @unnumberedsec)
-    (@subheading . @heading)
-    (@appendixsubsec . @appendixsec)
-
-    (@subsubsection . @subsection)
-    (@unnumberedsubsubsec . @unnumberedsubsec)
-    (@subsubheading . @subheading)
-    (@appendixsubsubsec . @appendixsubsec))
-  "*An alist of next higher levels for chapters, sections. etc.
-For example, section to chapter, subsection to section.
-Used by `texinfo-raise-lower-sections'.
-The keys specify types of section; the values correspond to the next
-higher types.")
-
-(defvar texinfo-lowersections-alist
-  '((@chapter . @section)
-    (@unnumbered . @unnumberedsec)
-    (@centerchap . @unnumberedsec)
-    (@majorheading . @heading)
-    (@chapheading . @heading)
-    (@appendix . @appendixsec)
-
-    (@section . @subsection)
-    (@unnumberedsec . @unnumberedsubsec)
-    (@heading . @subheading)
-    (@appendixsec . @appendixsubsec)
-
-    (@subsection . @subsubsection)
-    (@unnumberedsubsec . @unnumberedsubsubsec)
-    (@subheading . @subsubheading)
-    (@appendixsubsec . @appendixsubsubsec)
-
-    (@subsubsection . @subsubsection) ; Cannot go lower.
-    (@unnumberedsubsubsec . @unnumberedsubsubsec)
-    (@subsubheading . @subsubheading)
-    (@appendixsubsubsec . @appendixsubsubsec))
-  "*An alist of next lower levels for chapters, sections. etc.
-For example, chapter to section, section to subsection.
-Used by `texinfo-raise-lower-sections'.
-The keys specify types of section; the values correspond to the next
-lower types.")
-

 ;;; Perform those texinfo-to-info conversions that apply to the whole input
 ;;; uniformly.
@@ -1077,8 +1070,8 @@
       (forward-char -1)
       (skip-chars-backward " ")
       (setq end (point))
-      (setq args (cons (if (> end beg) (buffer-substring-no-properties beg end))
-                       args))
+      (push (if (> end beg) (buffer-substring-no-properties beg end))
+            args)
       (goto-char next)
       (skip-chars-forward " "))
     (if (eolp) (forward-char 1))
@@ -1110,8 +1103,8 @@
              (goto-char beg)
              (while (search-forward "\n" end t)
                (replace-match " "))))
-      (setq args (cons (if (> end beg) (buffer-substring-no-properties beg end))
-                       args))
+      (push (if (> end beg) (buffer-substring-no-properties beg end))
+            args)
       (goto-char next))
     ;;(if (eolp) (forward-char 1))
     (setq texinfo-command-end (point))
@@ -1140,7 +1133,7 @@
                (re-search-forward "[\n ]")
                (forward-char -1)
                (setq end (point))))
-        (setq args (cons (buffer-substring-no-properties beg end) args))
+        (push (buffer-substring-no-properties beg end) args)
         (skip-chars-forward " "))
       (forward-char 1)
       (nreverse args))))
@@ -1184,7 +1177,7 @@
     (let ((tem (if texinfo-fold-nodename-case (downcase name) name)))
       (if (assoc tem texinfo-node-names)
           (error "Duplicate node name: %s" name)
-        (setq texinfo-node-names (cons (list tem) texinfo-node-names))))
+        (push (list tem) texinfo-node-names)))
     (setq texinfo-footnote-number 0)
     ;; insert "\n\^_" unconditionally since this is what info is looking for
     (insert "\n\^_\nFile: " texinfo-format-filename
@@ -1494,8 +1487,6 @@
 Argument is either end or separate."
   (setq texinfo-footnote-style (texinfo-parse-arg-discard)))

-(defvar texinfo-footnote-number)
-
 (put 'footnote 'texinfo-format 'texinfo-format-footnote)
 (defun texinfo-format-footnote ()
   "Format a footnote in either end of node or separate node style.
@@ -1601,9 +1592,8 @@

 (defun texinfo-push-stack (check arg)
   (setq texinfo-stack-depth (1+ texinfo-stack-depth))
-  (setq texinfo-stack
-        (cons (list check arg texinfo-command-start)
-              texinfo-stack)))
+  (push (list check arg texinfo-command-start)
+        texinfo-stack))

 (defun texinfo-pop-stack (check)
   (setq texinfo-stack-depth (1- texinfo-stack-depth))
@@ -1974,7 +1964,7 @@
     @end multitable

 where the fractions specify the width of each column as a percent
-of the current width of the text (i.e., of the fill-column).
+of the current width of the text (i.e., of the `fill-column').

 Long lines of text are filled within columns.

@@ -2028,12 +2018,10 @@
      ((looking-at "@columnfractions")
       (forward-word 1)
       (while (not (eolp))
-        (setq texinfo-multitable-width-list
-              (cons
-               (truncate
-                (1-
-                 (* fill-column (read (get-buffer (current-buffer))))))
-               texinfo-multitable-width-list))))
+        (push (truncate
+               (1-
+                (* fill-column (read (get-buffer (current-buffer))))))
+              texinfo-multitable-width-list)))
      ;;
      ;; Case 2: {Column 1 template} {Column 2} {Column 3 example}
      ((looking-at "{")
@@ -2044,9 +2032,8 @@
                  (end-of-template
                  ;; forward-sexp works with braces in Texinfo mode
                   (progn (forward-sexp 1) (1- (point)))))
-            (setq texinfo-multitable-width-list
-                  (cons (- end-of-template start-of-template)
-                        texinfo-multitable-width-list))
+            (push (- end-of-template start-of-template)
+                  texinfo-multitable-width-list)
             ;; Remove carriage return from within a template, if any.
             ;; This helps those those who want to use more than
             ;; one line's worth of words in @multitable line.
@@ -2417,13 +2404,11 @@
          (beginning-delimiter (or (nth 1 args) ""))
          (end-delimiter (or (nth 2 args) "")))
     (texinfo-discard-command)
-    (setq texinfo-enclosure-list
-        (cons
-         (list command-name
-               (list
-                beginning-delimiter
-                end-delimiter))
-         texinfo-enclosure-list))))
+    (push (list command-name
+                (list
+                 beginning-delimiter
+                 end-delimiter))
+          texinfo-enclosure-list)))


 ;;; @alias
@@ -2436,12 +2421,10 @@
     (save-excursion (end-of-line) (setq texinfo-command-end (point)))
     (if (not (looking-at "\\([^=]+\\)=\\(.*\\)"))
 	(error "Invalid alias command")
-      (setq texinfo-alias-list
-	    (cons
-	     (cons
-	      (match-string-no-properties 1)
-	      (match-string-no-properties 2))
-	     texinfo-alias-list))
+      (push (cons
+             (match-string-no-properties 1)
+             (match-string-no-properties 2))
+            texinfo-alias-list)
       (texinfo-discard-command))
     )
   )
@@ -2570,8 +2553,7 @@
    "lisp\\|"
    "smalllisp"
    "\\)")
-  "Regexp specifying environments in which @kbd does not put `...'
-  around argument.")
+  "Regexp matching environments in which @kbd does not put `...' around arg.")

 (defvar texinfo-format-kbd-end-regexp
   (concat
@@ -2584,7 +2566,7 @@
    "smalllisp"
    "\\)")
   "Regexp specifying end of environments in which @kbd does not put `...'
-  around argument. (See `texinfo-format-kbd-regexp')")
+around argument. (See `texinfo-format-kbd-regexp')")

 (put 'kbd 'texinfo-format 'texinfo-format-kbd)
 (defun texinfo-format-kbd ()
@@ -2793,8 +2775,8 @@

 ;;; Refilling and indenting:  @refill, @paragraphindent, @noindent

-;;; Indent only those paragraphs that are refilled as a result of an
-;;; @refill command.
+;; Indent only those paragraphs that are refilled as a result of an
+;; @refill command.

 ;;    * If the value is `asis', do not change the existing indentation at
 ;;      the starts of paragraphs.
@@ -2804,8 +2786,8 @@
 ;;    * If the value is greater than zero, indent each paragraph by that
 ;;      number of spaces.

-;;; But do not refill paragraphs with an @refill command that are
-;;; preceded by @noindent or are part of a table, list, or deffn.
+;; But do not refill paragraphs with an @refill command that are
+;; preceded by @noindent or are part of a table, list, or deffn.

 (defvar texinfo-paragraph-indent "asis"
   "Number of spaces for @refill to indent a paragraph; else to leave as is.")
@@ -2822,7 +2804,7 @@

 (put 'refill 'texinfo-format 'texinfo-format-refill)
 (defun texinfo-format-refill ()
-  "Refill paragraph. Also, indent first line as set by @paragraphindent.
+  "Refill paragraph.  Also, indent first line as set by @paragraphindent.
 Default is to leave paragraph indentation as is."
   (texinfo-discard-command)
   (let ((position (point-marker)))
@@ -2941,11 +2923,9 @@

     ;; eg: "aa" . texinfo-aaindex
     (or (assoc index-name texinfo-indexvar-alist)
-        (setq texinfo-indexvar-alist
-              (cons
-               (cons index-name
-                     index-alist-name)
-               texinfo-indexvar-alist)))
+        (push (cons index-name
+                    index-alist-name)
+              texinfo-indexvar-alist))

     (fset index-formatting-command
           (list 'lambda 'nil
@@ -4024,7 +4004,7 @@
 (put 'ifset 'texinfo-end 'texinfo-discard-command)
 (put 'ifset 'texinfo-format 'texinfo-if-set)
 (defun texinfo-if-set ()
-  "If set, continue formatting; else do not format region up to @end ifset"
+  "If set, continue formatting; else do not format region up to @end ifset."
   (let ((arg (texinfo-parse-arg-discard)))
     (cond
      ((eq (get (car (read-from-string arg)) 'texinfo-whether-setp)
@@ -4045,7 +4025,7 @@
 (put 'ifclear 'texinfo-end 'texinfo-discard-command)
 (put 'ifclear 'texinfo-format 'texinfo-if-clear)
 (defun texinfo-if-clear ()
-  "If clear, continue formatting; if set, do not format up to @end ifset"
+  "If clear, continue formatting; if set, do not format up to @end ifset."
   (let ((arg (texinfo-parse-arg-discard)))
     (cond
      ((eq (get (car (read-from-string arg)) 'texinfo-whether-setp)
@@ -4291,7 +4271,7 @@
 ;;; Batch formatting

 (defun batch-texinfo-format ()
-  "Runs  texinfo-format-buffer  on the files remaining on the command line.
+  "Run `texinfo-format-buffer' on the files remaining on the command line.
 Must be used only with -batch, and kills Emacs on completion.
 Each file will be processed even if an error occurred previously.
 For example, invoke
@@ -4317,8 +4297,8 @@
                      (nconc (directory-files file)
                             (cdr command-line-args-left))))
               (t
-               (setq files (cons file files)
-                     command-line-args-left (cdr command-line-args-left)))))
+               (push file files)
+               (setq command-line-args-left (cdr command-line-args-left)))))
       (while files
         (setq file (car files)
               files (cdr files))
@@ -4354,5 +4334,5 @@
 ;;; Place `provide' at end of file.
 (provide 'texinfmt)

-;;; arch-tag: 1e8d9a2d-bca0-40a0-ac6c-dab01bc6f725
+;; arch-tag: 1e8d9a2d-bca0-40a0-ac6c-dab01bc6f725
 ;;; texinfmt.el ends here