Mercurial > emacs

--- a/src/hftctl.c	Sat Feb 22 20:39:30 1992 +0000
+++ b/src/hftctl.c	Sat Feb 22 21:15:26 1992 +0000
@@ -52,6 +52,7 @@
 #include <termios.h>
 #include <termio.h>
 #include <sys/hft.h>
+#include <sys/uio.h>
 #include <sys/tty.h>
 /* #include <sys/pty.h> */
 #define REMOTE 0x01
@@ -76,8 +77,8 @@

 /*************** EXTERNAL / GLOBAL DATA AREA ********************/

-       int              hfqry();
-       int              hfskbd();
+static int              hfqry();
+static int              hfskbd();
        char            *malloc();

 extern int              errno;
--- a/src/unexaix.c	Sat Feb 22 20:39:30 1992 +0000
+++ b/src/unexaix.c	Sat Feb 22 21:15:26 1992 +0000
@@ -1,285 +1,871 @@
-/*
-  This file is not used because it occasionally fails to work.  This
-  happens because the bss address when Emacs is run is not always the
-  same.  If it happens to be different from what it was
-  when Emacs was dumped, the dumped data won't work.
-  No one has been able to prevent the address from varying.
+/* Modified by Andrew.Vignaux@comp.vuw.ac.nz to get it to work :-) */
+
+/* Copyright (C) 1985, 1986, 1987, 1988 Free Software Foundation, Inc.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 1, or (at your option)
+    any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+In other words, you are welcome to use, share and improve this program.
+You are forbidden to forbid anyone else to use, share and improve
+what you give them.   Help stamp out software-hoarding!  */
+

-  The following comments should be in share-lib/MACHINES if this
-  dumping is ever made to work:
+/*
+ * unexec.c - Convert a running program into an a.out file.
+ *
+ * Author:	Spencer W. Thomas
+ * 		Computer Science Dept.
+ * 		University of Utah
+ * Date:	Tue Mar  2 1982
+ * Modified heavily since then.
+ *
+ * Synopsis:
+ *	unexec (new_name, a_name, data_start, bss_start, entry_address)
+ *	char *new_name, *a_name;
+ *	unsigned data_start, bss_start, entry_address;
+ *
+ * Takes a snapshot of the program and makes an a.out format file in the
+ * file named by the string argument new_name.
+ * If a_name is non-NULL, the symbol table will be taken from the given file.
+ * On some machines, an existing a_name file is required.
+ *
+ * The boundaries within the a.out file may be adjusted with the data_start
+ * and bss_start arguments.  Either or both may be given as 0 for defaults.
+ *
+ * Data_start gives the boundary between the text segment and the data
+ * segment of the program.  The text segment can contain shared, read-only
+ * program code and literal data, while the data segment is always unshared
+ * and unprotected.  Data_start gives the lowest unprotected address.
+ * The value you specify may be rounded down to a suitable boundary
+ * as required by the machine you are using.
+ *
+ * Specifying zero for data_start means the boundary between text and data
+ * should not be the same as when the program was loaded.
+ * If NO_REMAP is defined, the argument data_start is ignored and the
+ * segment boundaries are never changed.
+ *
+ * Bss_start indicates how much of the data segment is to be saved in the
+ * a.out file and restored when the program is executed.  It gives the lowest
+ * unsaved address, and is rounded up to a page boundary.  The default when 0
+ * is given assumes that the entire data segment is to be stored, including
+ * the previous data and bss as well as any additional storage allocated with
+ * break (2).
+ *
+ * The new file is set up to start at entry_address.
+ *
+ * If you make improvements I'd like to get them too.
+ * harpo!utah-cs!thomas, thomas@Utah-20
+ *
+ */
+
+/* There are several compilation parameters affecting unexec:
+
+* COFF

-  Note that Emacs can store the pure Lisp data in a shared segment on
-  this machine, but only if you put this command in one of the boot
-  scripts
+Define this if your system uses COFF for executables.
+Otherwise we assume you use Berkeley format.
+
+* NO_REMAP
+
+Define this if you do not want to try to save Emacs's pure data areas
+as part of the text segment.
+
+Saving them as text is good because it allows users to share more.
+
+However, on machines that locate the text area far from the data area,
+the boundary cannot feasibly be moved.  Such machines require
+NO_REMAP.
+
+Also, remapping can cause trouble with the built-in startup routine
+/lib/crt0.o, which defines `environ' as an initialized variable.
+Dumping `environ' as pure does not work!  So, to use remapping,
+you must write a startup routine for your machine in Emacs's crt0.c.
+If NO_REMAP is defined, Emacs uses the system's crt0.o.
+
+* SECTION_ALIGNMENT
+
+Some machines that use COFF executables require that each section
+start on a certain boundary *in the COFF file*.  Such machines should
+define SECTION_ALIGNMENT to a mask of the low-order bits that must be
+zero on such a boundary.  This mask is used to control padding between
+segments in the COFF file.
+
+If SECTION_ALIGNMENT is not defined, the segments are written
+consecutively with no attempt at alignment.  This is right for
+unmodified system V.
+
+* SEGMENT_MASK

-      emacs -batch -q
+Some machines require that the beginnings and ends of segments
+*in core* be on certain boundaries.  For most machines, a page
+boundary is sufficient.  That is the default.  When a larger
+boundary is needed, define SEGMENT_MASK to a mask of
+the bits that must be zero on such a boundary.
+
+* A_TEXT_OFFSET(HDR)
+
+Some machines count the a.out header as part of the size of the text
+segment (a_text); they may actually load the header into core as the
+first data in the text segment.  Some have additional padding between
+the header and the real text of the program that is counted in a_text.
+
+For these machines, define A_TEXT_OFFSET(HDR) to examine the header
+structure HDR and return the number of bytes to add to `a_text'
+before writing it (above and beyond the number of bytes of actual
+program text).  HDR's standard fields are already correct, except that
+this adjustment to the `a_text' field has not yet been made;
+thus, the amount of offset can depend on the data in the file.
+
+* A_TEXT_SEEK(HDR)

-  so that it is run as root when the machine is booted.  This command
-  creates a read-only shared segment owned by root.  Otherwise the
-  pure data is not shared.  The pure data size is around 100K, which
-  may not be enough to matter for most users of this machine.
+If defined, this macro specifies the number of bytes to seek into the
+a.out file before starting to write the text segment.a
+
+* EXEC_MAGIC
+
+For machines using COFF, this macro, if defined, is a value stored
+into the magic number field of the output file.
+
+* ADJUST_EXEC_HEADER
+
+This macro can be used to generate statements to adjust or
+initialize nonstandard fields in the file header
+
+* ADDR_CORRECT(ADDR)
+
+Macro to correct an int which is the bit pattern of a pointer to a byte
+into an int which is the number of a byte.
+
+This macro has a default definition which is usually right.
+This default definition is a no-op on most machines (where a
+pointer looks like an int) but not on all machines.
+
 */

-/* Dumping and loading data areas, for Emacs under AIX.
-   (It may also work on other kinds of system V.)
-   Copyright (C) 1990 Free Software Foundation, Inc.
+#define XCOFF
+#define COFF
+#define NO_REMAP

-This file is part of GNU Emacs.
+#ifndef emacs
+#define PERROR(arg) perror (arg); return -1
+#else
+#include "config.h"
+#define PERROR(file) report_error (file, new)
+#endif

-GNU Emacs is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
+#ifndef CANNOT_DUMP  /* all rest of file!  */
+
+#ifndef CANNOT_UNEXEC /* most of rest of file */

-GNU Emacs is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
+#include <a.out.h>
+/* Define getpagesize () if the system does not.
+   Note that this may depend on symbols defined in a.out.h
+ */
+#include "getpagesize.h"

-You should have received a copy of the GNU General Public License
-along with GNU Emacs; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+#ifndef makedev			/* Try to detect types.h already loaded */
+#include <sys/types.h>
+#endif
+#include <stdio.h>
+#include <sys/stat.h>
+#include <errno.h>

-/* This is based on a public domain program written by IBM.  */
+extern char *start_of_text ();		/* Start of text */
+extern char *start_of_data ();		/* Start of initialized data */

-/*************** SYSTEM DEFINES *********************************/
+extern int _data;
+extern int _edata;
+extern int _text;
+extern int _etext;
+extern int _end;
+#ifdef COFF
+#ifndef USG
+#ifndef STRIDE
+#ifndef UMAX
+#ifndef sun386
+/* I have a suspicion that these are turned off on all systems
+   and can be deleted.  Try it in version 19.  */
+#include <filehdr.h>
+#include <aouthdr.h>
+#include <scnhdr.h>
+#include <syms.h>
+#endif /* not sun386 */
+#endif /* not UMAX */
+#endif /* Not STRIDE */
+#endif /* not USG */
+static long block_copy_start;		/* Old executable start point */
+static struct filehdr f_hdr;		/* File header */
+static struct aouthdr f_ohdr;		/* Optional file header (a.out) */
+long bias;			/* Bias to add for growth */
+long lnnoptr;			/* Pointer to line-number info within file */
+#define SYMS_START block_copy_start

-#include "config.h"
-#include "paths.h"
-#include <sys/types.h>
-#include <sys/files.h>
-#include <fcntl.h>
-#include <sys/mode.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <malloc.h>
-#include <stdio.h>				/* MWW */
-#include "lisp.h"
+static long text_scnptr;
+static long data_scnptr;
+#ifdef XCOFF
+static long load_scnptr;
+static long orig_load_scnptr;
+static long orig_data_scnptr;
+#endif
+static long data_st;

-/*************** LOCAL DEFINES **********************************/
+#ifndef MAX_SECTIONS
+#define MAX_SECTIONS	10
+#endif

-struct data_header		/* saved data header		*/
-{
-  char *start;			/* dump _data addr		*/
-  char *end;			/* dump _end addr		*/
-  char *sbrk1;			/* dump original sbrk addr	*/
-  char *sbrk2;			/* dump final sbrk addr	*/
-  int puresize;			/* size of pure data dumped  */
-};
+#endif /* COFF */
+
+static int pagemask;

-#define EMACSSHMKEY "EMACSSHMKEY"
-#define EMACS_DATA_FILE "EMACS-DATA"
-#define NEW_SHMGET_FLAGS (IPC_CREAT | S_IWUSR | S_IRUSR \
-      | S_IWGRP | S_IRGRP | S_IWOTH | S_IROTH)
-#define OLD_SHMAT_FLAGS SHM_RDONLY
-#define OLD_SHMGET_FLAGS (S_IRUSR | S_IRGRP | S_IROTH)
-#define OLD_OPEN_FLAGS O_RDONLY
-#define NEW_OPEN_FLAGS (O_RDWR | O_CREAT | O_TRUNC)
+/* Correct an int which is the bit pattern of a pointer to a byte
+   into an int which is the number of a byte.
+   This is a no-op on ordinary machines, but not on all.  */
+
+#ifndef ADDR_CORRECT   /* Let m-*.h files override this definition */
+#define ADDR_CORRECT(x) ((char *)(x) - (char*)0)
+#endif
+
+#ifdef emacs

-/*************** EXTERNAL / GLOBAL DATA AREA ********************/
+static
+report_error (file, fd)
+     char *file;
+     int fd;
+{
+  if (fd)
+    close (fd);
+  error ("Failure operating on %s", file);
+}
+#endif /* emacs */

-extern char _data;		/* start of data addr		*/
-extern char _end;		/* end of all data + 1 addr	*/
-static char *original_sbrk;	/* sbrk when dump first run	*/
+#define ERROR0(msg) report_error_1 (new, msg, 0, 0); return -1
+#define ERROR1(msg,x) report_error_1 (new, msg, x, 0); return -1
+#define ERROR2(msg,x,y) report_error_1 (new, msg, x, y); return -1

-void
-map_in_data (use_dumped_data)
-     int use_dumped_data;
+static
+report_error_1 (fd, msg, a1, a2)
+     int fd;
+     char *msg;
+     int a1, a2;
 {
-  int bufsize;			/* malloc buffer size		*/
-  struct data_header dh;	/* saved data header		*/
-  int fd;			/* saved data file descriptor	*/
-  char *finaladdr;		/* last addr in bucket		*/
-  char *ipckey = getenv (EMACSSHMKEY); /* env ipc key string	*/
-  int length;			/* dumped data lengths		*/
-  char *newaddr;		/* new malloc buffer addr	*/
-  int numblks;			/* number of remaining mallocs	*/
-  int shmid;			/* shared memory id		*/
-  key_t shmkey;			/* shared memory key		*/
-  /* Note that using malloc here may not be safe.  */
-  char name[sizeof (PATH_EXEC) + sizeof (EMACS_DATA_FILE) + 2];
+  close (fd);
+#ifdef emacs
+  error (msg, a1, a2);
+#else
+  fprintf (stderr, msg, a1, a2);
+  fprintf (stderr, "\n");
+#endif
+}

-  /* Consume remaining malloc space without increasing		*/
-  /* the end of data space					*/
-  original_sbrk = sbrk (0);
-  for (bufsize = 16; bufsize < getpagesize (); bufsize *= 2)
+static int make_hdr ();
+static void mark_x ();
+static int copy_text_and_data ();
+static int copy_sym ();
+
+/* ****************************************************************
+ * unexec
+ *
+ * driving logic.
+ */
+unexec (new_name, a_name, data_start, bss_start, entry_address)
+     char *new_name, *a_name;
+     unsigned data_start, bss_start, entry_address;
+{
+  int new, a_out = -1;
+
+  if (a_name && (a_out = open (a_name, 0)) < 0)
     {
-      while ((newaddr = (char *)malloc (bufsize - 8)) < original_sbrk)
-	;
-      for (numblks = (getpagesize () / bufsize) - 1; numblks > 0; numblks--)
-	malloc (bufsize - 8);
-      finaladdr = sbrk (0);
+      PERROR (a_name);
+    }
+  if ((new = creat (new_name, 0666)) < 0)
+    {
+      PERROR (new_name);
     }
-  original_sbrk = sbrk (0);
-
-  /* If we don't want the dumped data, get an unshared segment.  */
-  if (!use_dumped_data)
+  if (make_hdr (new,a_out,data_start,bss_start,entry_address,a_name,new_name) < 0
+      || copy_text_and_data (new) < 0
+      || copy_sym (new, a_out, a_name, new_name) < 0
+#ifdef COFF
+      || adjust_lnnoptrs (new, a_out, new_name) < 0
+#endif
+#ifdef XCOFF
+      || unrelocate_symbols (new, a_out, a_name, new_name) < 0
+#endif
+      )
     {
-      shmid = shmget (IPC_PRIVATE, PURESIZE, NEW_SHMGET_FLAGS);
-      if (shmid == -1
-	  || shmat (shmid, (char *)PURE_SEG_BITS, 0) == -1)
-	{
-	  fprintf (stderr, "emacs: failure obtaining new unshared memory segment.\n");
-	  exit (1);
-	}
-      return;
+      close (new);
+      /* unlink (new_name);	    	/* Failed, unlink new a.out */
+      return -1;
     }

-  /* Compute the file name with the dumped data.  */
-  strcpy (name, PATH_EXEC);
-  strcat (name, "/");
-  strcat (name, EMACS_DATA_FILE);
+  close (new);
+  if (a_out >= 0)
+    close (a_out);
+  mark_x (new_name);
+  return 0;
+}
+
+/* ****************************************************************
+ * make_hdr
+ *
+ * Make the header in the new a.out from the header in core.
+ * Modify the text and data sizes.
+ */
+static int
+make_hdr (new, a_out, data_start, bss_start, entry_address, a_name, new_name)
+     int new, a_out;
+     unsigned data_start, bss_start, entry_address;
+     char *a_name;
+     char *new_name;
+{
+  register int scns;
+  unsigned int bss_end;

-  /* Open the file and make sure the addresses have not changed.  */
-  fd = open (name, OLD_OPEN_FLAGS, 0);
-  if (fd < 0)
+  struct scnhdr section[MAX_SECTIONS];
+  struct scnhdr * f_thdr;		/* Text section header */
+  struct scnhdr * f_dhdr;		/* Data section header */
+  struct scnhdr * f_bhdr;		/* Bss section header */
+  struct scnhdr * f_lhdr;		/* Loader section header */
+  struct scnhdr * f_tchdr;		/* Typechk section header */
+  struct scnhdr * f_dbhdr;		/* Debug section header */
+  struct scnhdr * f_xhdr;		/* Except section header */
+
+  load_scnptr = orig_load_scnptr = lnnoptr = 0;
+  pagemask = getpagesize () - 1;
+
+  /* Adjust text/data boundary. */
+#ifdef NO_REMAP
+  data_start = (long) start_of_data ();
+#endif /*  NO_REMAP */
+  data_start = ADDR_CORRECT (data_start);
+
+#ifdef SEGMENT_MASK
+  data_start = data_start & ~SEGMENT_MASK; /* (Down) to segment boundary. */
+#else
+  data_start = data_start & ~pagemask; /* (Down) to page boundary. */
+#endif
+
+
+  bss_end = ADDR_CORRECT (sbrk (0)) + pagemask;
+  bss_end &= ~ pagemask;
+  /* Adjust data/bss boundary. */
+  if (bss_start != 0)
     {
-      fprintf (stderr, "emacs: failure opening `%s'\n", name);
-      exit (1);
+      bss_start = (ADDR_CORRECT (bss_start) + pagemask);
+      /* (Up) to page bdry. */
+      bss_start &= ~ pagemask;
+      if (bss_start > bss_end)
+	{
+	  ERROR1 ("unexec: Specified bss_start (%u) is past end of program",
+		  bss_start);
+	}
     }
-  if (read (fd, (char *)&dh, sizeof (dh)) != sizeof (dh)
-      || dh.start != &_data
-      || dh.end != &_end
-      || dh.sbrk1 != original_sbrk
-      || dh.puresize != PURESIZE)
-    {
-      fprintf (stderr, "emacs: header mismatch in `%s'\n", name);
-      exit (1);
-    }
+  else
+    bss_start = bss_end;

-  /* Load in the unshared contents.  */
-  if (!(length = dh.end - dh.start)
-      || read (fd, (char *)&_data, length) != length
-      || !(length = dh.sbrk2 - dh.sbrk1)
-      || brk (dh.sbrk2) == -1
-      || read (fd, dh.sbrk1, length) != length)
+  if (data_start > bss_start)	/* Can't have negative data size. */
     {
-      fprintf (stderr, "emacs: failure loading unshared data.\n");
-      exit (1);
+      ERROR2 ("unexec: data_start (%u) can't be greater than bss_start (%u)",
+	      data_start, bss_start);
     }

-  /* Determine ipc key from environment or default		*/
-  if (ipckey && *ipckey)
-    shmkey = atoi (ipckey);
-  else
-    shmkey = SHMKEY;
-
-  /* Attach to "pure data" shared memory segment		*/
-  if ((shmid = shmget (shmkey, 0, 0)) == -1
-      || (newaddr = shmat (shmid, (char *)PURE_SEG_BITS, OLD_SHMAT_FLAGS)) == -1)
+#ifdef COFF
+  /* Salvage as much info from the existing file as possible */
+  block_copy_start = 0;
+  f_thdr = NULL; f_dhdr = NULL; f_bhdr = NULL;
+  f_lhdr = NULL; f_tchdr = NULL; f_dbhdr = NULL; f_xhdr = NULL;
+  if (a_out >= 0)
     {
-      /* We were unable to open an existing segment.  Make a new one.  */
-      struct shmid_ds buf;
-
-      /* First get rid of the one we tried to get.  */
-      shmdt ((char *)PURE_SEG_BITS);
-      shmctl (shmid, IPC_RMID, 0);
+      if (read (a_out, &f_hdr, sizeof (f_hdr)) != sizeof (f_hdr))
+	{
+	  PERROR (a_name);
+	}
+      block_copy_start += sizeof (f_hdr);
+      if (f_hdr.f_opthdr > 0)
+	{
+	  if (read (a_out, &f_ohdr, sizeof (f_ohdr)) != sizeof (f_ohdr))
+	    {
+	      PERROR (a_name);
+	    }
+	  block_copy_start += sizeof (f_ohdr);
+	}
+      if (f_hdr.f_nscns > MAX_SECTIONS)
+	{
+	  ERROR0 ("unexec: too many section headers -- increase MAX_SECTIONS");
+	}
+      /* Loop through section headers */
+      for (scns = 0; scns < f_hdr.f_nscns; scns++) {
+	struct scnhdr *s = &section[scns];
+	if (read (a_out, s, sizeof (*s)) != sizeof (*s))
+	  {
+	    PERROR (a_name);
+	  }
+	if (s->s_scnptr > 0L)
+	  {
+            if (block_copy_start < s->s_scnptr + s->s_size)
+	      block_copy_start = s->s_scnptr + s->s_size;
+	  }

-      /* If we could not write the data file,
-	 don't make a shared segment that we could write.
-	 Make an unshared segment instead.  */
-      if (access (name, W_OK) == 0)
+#define CHECK_SCNHDR(ptr, name, flags) \
+  if (strcmp(s->s_name, name) == 0) { \
+    if (s->s_flags != flags) { \
+      fprintf(stderr, "unexec: %x flags where %x expected in %s section.\n", \
+	      s->s_flags, flags, name); \
+    } \
+    if (ptr) { \
+      fprintf(stderr, "unexec: duplicate section header for section %s.\n", \
+	      name); \
+    } \
+    ptr = s; \
+  }
+	CHECK_SCNHDR(f_thdr, _TEXT, STYP_TEXT);
+	CHECK_SCNHDR(f_dhdr, _DATA, STYP_DATA);
+	CHECK_SCNHDR(f_bhdr, _BSS, STYP_BSS);
+	CHECK_SCNHDR(f_lhdr, _LOADER, STYP_LOADER);
+	CHECK_SCNHDR(f_dbhdr, _DEBUG,  STYP_DEBUG);
+	CHECK_SCNHDR(f_tchdr, _TYPCHK,  STYP_TYPCHK);
+	CHECK_SCNHDR(f_xhdr, _EXCEPT,  STYP_EXCEPT);
+      }
+
+      if (f_thdr == 0)
+	{
+	  ERROR1 ("unexec: couldn't find \"%s\" section", _TEXT);
+	}
+      if (f_dhdr == 0)
+	{
+	  ERROR1 ("unexec: couldn't find \"%s\" section", _DATA);
+	}
+      if (f_bhdr == 0)
 	{
-	  shmid = shmget (IPC_PRIVATE, PURESIZE, NEW_SHMGET_FLAGS);
-	  if (shmid == -1
-	      || shmat (shmid, (char *)PURE_SEG_BITS, 0) == -1)
-	    {
-	      fprintf (stderr, "emacs: failure obtaining new unshared memory segment.\n");
-	      exit (1);
-	    }
+	  ERROR1 ("unexec: couldn't find \"%s\" section", _BSS);
+	}
+    }
+  else
+    {
+      ERROR0 ("can't build a COFF file from scratch yet");
+    }
+  orig_data_scnptr = f_dhdr->s_scnptr;
+  orig_load_scnptr = f_lhdr ? f_lhdr->s_scnptr : 0;

-	  /* Load the proper data into it.  */
-	  if (read (fd, PURE_SEG_BITS, PURESIZE) != PURESIZE)
-	    {
-	      fprintf (stderr, "emacs: failure loading shared memory data.\n");
-	      shmdt ((char *)PURE_SEG_BITS);
-	      shmctl (shmid, IPC_RMID, 0);
-	      exit (1);
-	    }
+  /* Now we alter the contents of all the f_*hdr variables
+     to correspond to what we want to dump.  */
+  f_hdr.f_flags |= (F_RELFLG | F_EXEC);		/* Why? */
+#ifdef EXEC_MAGIC
+  f_ohdr.magic = EXEC_MAGIC;
+#endif
+#ifndef NO_REMAP
+  f_ohdr.tsize = data_start - f_ohdr.text_start;
+  f_ohdr.text_start = (long) start_of_text ();
+#endif
+  f_ohdr.dsize = bss_start - ((unsigned) &_data);
+  f_ohdr.bsize = bss_end - bss_start;

-	  close (fd);
-	  return;
+  f_dhdr->s_size = f_ohdr.dsize;
+  f_bhdr->s_size = f_ohdr.bsize;
+  f_bhdr->s_paddr = f_ohdr.dsize;
+  f_bhdr->s_vaddr = f_ohdr.dsize;
+
+  /* fix scnptr's */
+  {
+    long ptr;
+
+    for (scns = 0; scns < f_hdr.f_nscns; scns++) {
+      struct scnhdr *s = &section[scns];
+      if (scns == 0)
+	ptr = s->s_scnptr;
+
+      if (s->s_scnptr != 0)
+	{
+	  s->s_scnptr = ptr;
 	}

-      /* Allocate the new shared segment and arrange to write it.  */
-      if ((shmid = shmget (shmkey, PURESIZE, NEW_SHMGET_FLAGS)) == -1
-	  || shmat (shmid, (char *)PURE_SEG_BITS, 0) == -1)
+      if ((s->s_flags & 0xffff) == STYP_PAD)
 	{
-	  fprintf (stderr, "emacs: failure obtaining new shared memory segment.\n");
-	  shmdt ((char *)PURE_SEG_BITS);
-	  shmctl (shmid, IPC_RMID, 0);
-	  exit (1);
+	  /*
+	   * the text_start should probably be o_algntext but that doesn't
+	   * seem to change
+	   */
+	  if (f_ohdr.text_start != 0) /* && scns != 0 */
+	    {
+	      s->s_size = 512 - (s->s_scnptr % 512);
+	      if (s->s_size == 512)
+		s->s_size = 0;
+	    }
 	}

-      /* Load the proper data into it.  */
-      if (read (fd, PURE_SEG_BITS, PURESIZE) != PURESIZE)
-	{
-	  fprintf (stderr, "emacs: failure loading shared memory data.\n");
-	  shmdt ((char *)PURE_SEG_BITS);
-	  shmctl (shmid, IPC_RMID, 0);
-	  exit (1);
-	}
+      ptr = ptr + s->s_size;
+    }
+
+    bias = ptr - block_copy_start;
+  }
+
+  /* fix other pointers */
+  for (scns = 0; scns < f_hdr.f_nscns; scns++) {
+    struct scnhdr *s = &section[scns];
+
+    if (s->s_relptr != 0)
+      {
+	s->s_relptr += bias;
+      }
+    if (s->s_lnnoptr != 0)
+      {
+	if (lnnoptr == 0) lnnoptr = s->s_lnnoptr;
+	s->s_lnnoptr += bias;
+      }
+  }

-      /* Detach from the segment and bring it back readonly.  */
-      shmdt ((char *)PURE_SEG_BITS);
+  if (f_hdr.f_symptr > 0L)
+    {
+      f_hdr.f_symptr += bias;
+    }

-      shmctl (shmid, IPC_STAT, &buf);
-      buf.shm_perm.mode = OLD_SHMGET_FLAGS;
-      shmctl (shmid, IPC_SET, &buf);
+  data_st = data_start;
+  text_scnptr = f_thdr->s_scnptr;
+  data_scnptr = f_dhdr->s_scnptr;
+  load_scnptr = f_lhdr ? f_lhdr->s_scnptr : 0;
+  block_copy_start = orig_load_scnptr;

-      newaddr = shmat (shmid, (char *)PURE_SEG_BITS, OLD_SHMAT_FLAGS);
-      if (newaddr == -1)
+#ifdef ADJUST_EXEC_HEADER
+  ADJUST_EXEC_HEADER
+#endif /* ADJUST_EXEC_HEADER */
+
+  if (write (new, &f_hdr, sizeof (f_hdr)) != sizeof (f_hdr))
+    {
+      PERROR (new_name);
+    }
+
+  if (f_hdr.f_opthdr > 0)
+    {
+      if (write (new, &f_ohdr, sizeof (f_ohdr)) != sizeof (f_ohdr))
 	{
-	  fprintf (stderr, "emacs: failure reattaching shared memory segment.\n");
-	  shmctl (shmid, IPC_RMID, 0);
-	  exit (1);
+	  PERROR (new_name);
 	}
     }

-  close (fd);
+  for (scns = 0; scns < f_hdr.f_nscns; scns++) {
+    struct scnhdr *s = &section[scns];
+    if (write (new, s, sizeof (*s)) != sizeof (*s))
+      {
+	PERROR (new_name);
+      }
+  }
+
+  return (0);
+
+#endif /* COFF */
+}
+
+/* ****************************************************************
+
+ *
+ * Copy the text and data segments from memory to the new a.out
+ */
+static int
+copy_text_and_data (new)
+     int new;
+{
+  register char *end;
+  register char *ptr;
+
+  lseek (new, (long) text_scnptr, 0);
+  ptr = start_of_text () + text_scnptr;
+  end = ptr + f_ohdr.tsize;
+  write_segment (new, ptr, end);
+
+  lseek (new, (long) data_scnptr, 0);
+  ptr = (char *) &_data;
+  end = ptr + f_ohdr.dsize;
+  write_segment (new, ptr, end);
+
+  return 0;
 }

-/* Dump the appropriate parts of memory into a file named NEW
-   from which the shared segment can be initialized.  */
+write_segment (new, ptr, end)
+     int new;
+     register char *ptr, *end;
+{
+  register int i, nwrite, ret;
+  char buf[80];
+  extern int errno;
+  char zeros[128];
+
+  bzero (zeros, sizeof zeros);

-void
-map_out_data (new)
-     char *new;
+  for (i = 0; ptr < end;)
+    {
+      /* distance to next multiple of 128.  */
+      nwrite = (((int) ptr + 128) & -128) - (int) ptr;
+      /* But not beyond specified end.  */
+      if (nwrite > end - ptr) nwrite = end - ptr;
+      ret = write (new, ptr, nwrite);
+      /* If write gets a page fault, it means we reached
+	 a gap between the old text segment and the old data segment.
+	 This gap has probably been remapped into part of the text segment.
+	 So write zeros for it.  */
+      if (ret == -1 && errno == EFAULT)
+	{
+	write (new, zeros, nwrite);
+	}
+      else if (nwrite != ret)
+	{
+	  sprintf (buf,
+		   "unexec write failure: addr 0x%x, fileno %d, size 0x%x, wrote 0x%x, errno %d",
+		   ptr, new, nwrite, ret, errno);
+	  PERROR (buf);
+	}
+      i += nwrite;
+      ptr += nwrite;
+    }
+}
+
+/* ****************************************************************
+ * copy_sym
+ *
+ * Copy the relocation information and symbol table from the a.out to the new
+ */
+static int
+copy_sym (new, a_out, a_name, new_name)
+     int new, a_out;
+     char *a_name, *new_name;
 {
-  struct data_header dh;	/* saved data header			*/
-  int fd;			/* saved data file descriptor		*/
-  int length;			/* dumped data length; */
+  char page[1024];
+  int n;
+
+  if (a_out < 0)
+    return 0;
+
+  if (SYMS_START == 0L)
+    return 0;
+
+  if (lnnoptr && lnnoptr < SYMS_START)	/* if there is line number info */
+    lseek (a_out, lnnoptr, 0);		/* start copying from there */
+  else
+    lseek (a_out, SYMS_START, 0);	/* Position a.out to symtab. */
+
+  while ((n = read (a_out, page, sizeof page)) > 0)
+    {
+      if (write (new, page, n) != n)
+	{
+	  PERROR (new_name);
+	}
+    }
+  if (n < 0)
+    {
+      PERROR (a_name);
+    }
+  return 0;
+}
+
+/* ****************************************************************
+ * mark_x
+ *
+ * After succesfully building the new a.out, mark it executable
+ */
+static void
+mark_x (name)
+     char *name;
+{
+  struct stat sbuf;
+  int um;
+  int new = 0;  /* for PERROR */

-
-  /* Create "saved data" file header */
-  dh.start = &_data;
-  dh.end = &_end;
-  dh.sbrk1 = original_sbrk;
-  dh.sbrk2 = sbrk (0);
-  dh.puresize = PURESIZE;
+  um = umask (777);
+  umask (um);
+  if (stat (name, &sbuf) == -1)
+    {
+      PERROR (name);
+    }
+  sbuf.st_mode |= 0111 & ~um;
+  if (chmod (name, sbuf.st_mode) == -1)
+    PERROR (name);
+}
+
+/*
+ *	If the COFF file contains a symbol table and a line number section,
+ *	then any auxiliary entries that have values for x_lnnoptr must
+ *	be adjusted by the amount that the line number section has moved
+ *	in the file (bias computed in make_hdr).  The #@$%&* designers of
+ *	the auxiliary entry structures used the absolute file offsets for
+ *	the line number entry rather than an offset from the start of the
+ *	line number section!
+ *
+ *	When I figure out how to scan through the symbol table and pick out
+ *	the auxiliary entries that need adjustment, this routine will
+ *	be fixed.  As it is now, all such entries are wrong and sdb
+ *	will complain.   Fred Fish, UniSoft Systems Inc.
+ */
+
+#ifdef COFF
+
+/* This function is probably very slow.  Instead of reopening the new
+   file for input and output it should copy from the old to the new
+   using the two descriptors already open (WRITEDESC and READDESC).
+   Instead of reading one small structure at a time it should use
+   a reasonable size buffer.  But I don't have time to work on such
+   things, so I am installing it as submitted to me.  -- RMS.  */
+
+adjust_lnnoptrs (writedesc, readdesc, new_name)
+     int writedesc;
+     int readdesc;
+     char *new_name;
+{
+  register int nsyms;
+  register int new;
+#ifdef amdahl_uts
+  SYMENT symentry;
+  AUXENT auxentry;
+#else
+  struct syment symentry;
+  union auxent auxentry;
+#endif

-  /* Create new "saved data" dump file				*/
-  unlink (new);
-  fd = open (new, NEW_OPEN_FLAGS, 0666);
-  if (fd < 0)
-    report_file_error ("Opening dump file", Fcons (build_string (new), Qnil));
+  if (!lnnoptr || !f_hdr.f_symptr)
+    return 0;
+
+  if ((new = open (new_name, 2)) < 0)
+    {
+      PERROR (new_name);
+      return -1;
+    }
+
+  lseek (new, f_hdr.f_symptr, 0);
+  for (nsyms = 0; nsyms < f_hdr.f_nsyms; nsyms++)
+    {
+      read (new, &symentry, SYMESZ);
+      if (symentry.n_numaux)
+	{
+	  read (new, &auxentry, AUXESZ);
+	  nsyms++;
+	  if (ISFCN (symentry.n_type)) {
+	    auxentry.x_sym.x_fcnary.x_fcn.x_lnnoptr += bias;
+	    lseek (new, -AUXESZ, 1);
+	    write (new, &auxentry, AUXESZ);
+	  }
+	}
+    }
+  close (new);
+}
+
+#endif /* COFF */
+
+#ifdef XCOFF
+
+/* It is probably a false economy to optimise this routine (it used to
+   read one LDREL and do do two lseeks per iteration) but the wrath of
+   RMS (see above :-) would be too much to bear */
+
+unrelocate_symbols (new, a_out, a_name, new_name)
+     int new, a_out;
+     char *a_name, *new_name;
+{
+  register int i;
+  register int l;
+  register LDREL *ldrel;
+  LDHDR ldhdr;
+  LDREL ldrel_buf [20];
+  ulong t_start = (ulong) &_text;
+  ulong d_start = (ulong) &_data;
+  int * p;
+  int dirty;
+
+  if (load_scnptr == 0)
+    return 0;
+
+  lseek (a_out, orig_load_scnptr, 0);
+  if (read (a_out, &ldhdr, sizeof (ldhdr)) != sizeof (ldhdr))
+    {
+      PERROR (new_name);
+    }
+
+#define SYMNDX_TEXT	0
+#define SYMNDX_DATA	1
+#define SYMNDX_BSS	2
+  l = 0;
+  for (i = 0; i < ldhdr.l_nreloc; i++, l--, ldrel++)
+    {
+      if (l == 0) {
+	lseek (a_out,
+	       orig_load_scnptr + LDHDRSZ + LDSYMSZ*ldhdr.l_nsyms + LDRELSZ*i,
+	       0);

-  /* Write saved header and data				*/
-  length = sizeof (dh);
-  if (write (fd, (char *)&dh, length) != length)
-    report_file_error ("Writing dump file header",
-		       Fcons (build_string (new), Qnil));
-  length = dh.end - dh.start;
-  if (write (fd, dh.start, length) != length)
-    report_file_error ("Writing low core in dump file",
-		       Fcons (build_string (new), Qnil));
-  length = dh.sbrk2 - dh.sbrk1;
-  if (write (fd, dh.sbrk1, length) != length)
-    report_file_error ("Writing heap in dump file",
-		       Fcons (build_string (new), Qnil));
-  length = PURESIZE;
-  if (write (fd, PURE_SEG_BITS, length) != length)
-    report_file_error ("Writing pure data in dump file",
-		       Fcons (build_string (new), Qnil));
-  close (fd);
+	l = ldhdr.l_nreloc - i;
+	if (l > sizeof (ldrel_buf) / LDRELSZ)
+	  l = sizeof (ldrel_buf) / LDRELSZ;
+
+	if (read (a_out, ldrel_buf, l * LDRELSZ) != l * LDRELSZ)
+	  {
+	    PERROR (a_name);
+	  }
+	ldrel = ldrel_buf;
+      }
+      dirty = 0;
+
+      /* this code may not be necessary */
+      /* I originally had == in the "assignment" and it still unrelocated */
+
+      /* move the BSS loader symbols to the DATA segment */
+      if (ldrel->l_rsecnm == f_ohdr.o_snbss)
+	ldrel->l_rsecnm = f_ohdr.o_sndata, dirty++;
+
+      if (ldrel->l_symndx == SYMNDX_BSS)
+	ldrel->l_symndx = SYMNDX_DATA, dirty++;
+
+      if (dirty)
+	{
+	  lseek (new,
+		 load_scnptr + LDHDRSZ + LDSYMSZ*ldhdr.l_nsyms + LDRELSZ*i,
+		 0);
+
+	  if (write (new, ldrel, LDRELSZ) != LDRELSZ)
+	    {
+	      PERROR (new_name);
+	    }
+	}
+
+      if (ldrel->l_rsecnm == f_ohdr.o_sndata)
+	{
+	  int orig_int;
+
+	  lseek (a_out, orig_data_scnptr + ldrel->l_vaddr, 0);
+
+	  if (read (a_out, (void *) &orig_int, sizeof (orig_int)) != sizeof (orig_int))
+	    {
+	      PERROR (a_name);
+	    }
+
+	  switch (ldrel->l_symndx) {
+	  case SYMNDX_TEXT:
+	    p = (int *) (d_start + ldrel->l_vaddr);
+	    orig_int = * p - (t_start - f_ohdr.text_start);
+	    break;
+
+	  case SYMNDX_DATA:
+	  case SYMNDX_BSS:
+	    p = (int *) (d_start + ldrel->l_vaddr);
+	    orig_int = * p - (d_start - f_ohdr.data_start);
+	    break;
+	  }
+
+	  lseek (new, data_scnptr + ldrel->l_vaddr, 0);
+	  if (write (new, (void *) &orig_int, sizeof (orig_int)) != sizeof (orig_int))
+	    {
+	      PERROR (new_name);
+	    }
+	}
+    }
 }
+#endif /* XCOFF */
+
+#endif /* not CANNOT_UNEXEC */
+
+#endif /* not CANNOT_DUMP */