Mercurial > emacs

changeset 111813:699c16883644

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Restore executable bit omitted when undeleting files in revisiton 102573.
author Chong Yidong <cyd@stupidchicken.com>
date Fri, 03 Dec 2010 12:32:55 -0500
parents 5e488dbb17f7
children a8e337ba89d3
files autogen.sh config.guess config.sub configure install-sh mkinstalldirs move-if-change update-subdirs
diffstat 1 files changed, 244 insertions(+), 228 deletions(-) [+]
line wrap: on
line diff
--- a/configure	Fri Dec 03 14:53:52 2010 +0000
+++ b/configure	Fri Dec 03 12:32:55 2010 -0500
@@ -1,11 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.65 for emacs 24.0.50.
+# Generated by GNU Autoconf 2.67 for emacs 24.0.50.
 #
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
 #
 #
 # This configure script is free software; the Free Software Foundation
@@ -316,7 +316,7 @@
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 
 
 } # as_fn_mkdir_p
@@ -356,19 +356,19 @@
 fi # as_fn_arith
 
 
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
 # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
 as_fn_error ()
 {
-  as_status=$?; test $as_status -eq 0 && as_status=1
-  if test "$3"; then
-    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
-  fi
-  $as_echo "$as_me: error: $1" >&2
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
   as_fn_exit $as_status
 } # as_fn_error
 
@@ -530,7 +530,7 @@
 exec 6>&1
 
 # Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
@@ -912,8 +912,9 @@
   fi
 
   case $ac_option in
-  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *)	ac_optarg=yes ;;
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
   esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
@@ -958,7 +959,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid feature name: $ac_useropt"
+      as_fn_error $? "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -984,7 +985,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid feature name: $ac_useropt"
+      as_fn_error $? "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1188,7 +1189,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid package name: $ac_useropt"
+      as_fn_error $? "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1204,7 +1205,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid package name: $ac_useropt"
+      as_fn_error $? "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1234,8 +1235,8 @@
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) as_fn_error "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information."
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
     ;;
 
   *=*)
@@ -1243,7 +1244,7 @@
     # Reject names that are not valid shell variable names.
     case $ac_envvar in #(
       '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
     esac
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
@@ -1261,13 +1262,13 @@
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error "missing argument to $ac_option"
+  as_fn_error $? "missing argument to $ac_option"
 fi
 
 if test -n "$ac_unrecognized_opts"; then
   case $enable_option_checking in
     no) ;;
-    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
     *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
 fi
@@ -1290,7 +1291,7 @@
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -1304,8 +1305,8 @@
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
   fi
@@ -1320,9 +1321,9 @@
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error "working directory cannot be determined"
+  as_fn_error $? "working directory cannot be determined"
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error "pwd does not report name of working directory"
+  as_fn_error $? "pwd does not report name of working directory"
 
 
 # Find the source files, if location was not specified.
@@ -1361,11 +1362,11 @@
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
 	pwd)`
 # When building in place, set srcdir=.
 if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1405,7 +1406,7 @@
       --help=short        display options specific to this package
       --help=recursive    display the short help of all the included packages
   -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
+  -q, --quiet, --silent   do not print \`checking ...' messages
       --cache-file=FILE   cache test results in FILE [disabled]
   -C, --config-cache      alias for \`--cache-file=config.cache'
   -n, --no-create         do not create output files
@@ -1624,9 +1625,9 @@
 if $ac_init_version; then
   cat <<\_ACEOF
 emacs configure 24.0.50
-generated by GNU Autoconf 2.65
-
-Copyright (C) 2009 Free Software Foundation, Inc.
+generated by GNU Autoconf 2.67
+
+Copyright (C) 2010 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1742,7 +1743,7 @@
     mv -f conftest.er1 conftest.err
   fi
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } >/dev/null && {
+  test $ac_status = 0; } > conftest.i && {
 	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        }; then :
@@ -1766,10 +1767,10 @@
 ac_fn_c_check_header_mongrel ()
 {
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  if eval "test \"\${$3+set}\"" = set; then :
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 fi
 eval ac_res=\$$3
@@ -1805,7 +1806,7 @@
 else
   ac_header_preproc=no
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
 $as_echo "$ac_header_preproc" >&6; }
 
@@ -1832,7 +1833,7 @@
 esac
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   eval "$3=\$ac_header_compiler"
@@ -1896,7 +1897,7 @@
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1918,15 +1919,18 @@
 
 } # ac_fn_c_check_header_compile
 
-# ac_fn_c_check_decl LINENO SYMBOL VAR
-# ------------------------------------
-# Tests whether SYMBOL is declared, setting cache variable VAR accordingly.
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
 ac_fn_c_check_decl ()
 {
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5
-$as_echo_n "checking whether $2 is declared... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  as_decl_name=`echo $2|sed 's/ *(.*//'`
+  as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1935,8 +1939,12 @@
 int
 main ()
 {
-#ifndef $2
-  (void) $2;
+#ifndef $as_decl_name
+#ifdef __cplusplus
+  (void) $as_decl_use;
+#else
+  (void) $as_decl_name;
+#endif
 #endif
 
   ;
@@ -1965,7 +1973,7 @@
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1977,7 +1985,7 @@
 else
   eval "$3=no"
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 fi
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
@@ -1995,7 +2003,7 @@
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
 $as_echo_n "checking for $2.$3... " >&6; }
-if { as_var=$4; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$4+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -2051,7 +2059,7 @@
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -2119,7 +2127,7 @@
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   eval "$3=no"
@@ -2168,7 +2176,7 @@
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by emacs $as_me 24.0.50, which was
-generated by GNU Autoconf 2.65.  Invocation command line was
+generated by GNU Autoconf 2.67.  Invocation command line was
 
   $ $0 $@
 
@@ -2278,11 +2286,9 @@
   {
     echo
 
-    cat <<\_ASBOX
-## ---------------- ##
+    $as_echo "## ---------------- ##
 ## Cache variables. ##
-## ---------------- ##
-_ASBOX
+## ---------------- ##"
     echo
     # The following way of writing the cache mishandles newlines in values,
 (
@@ -2316,11 +2322,9 @@
 )
     echo
 
-    cat <<\_ASBOX
-## ----------------- ##
+    $as_echo "## ----------------- ##
 ## Output variables. ##
-## ----------------- ##
-_ASBOX
+## ----------------- ##"
     echo
     for ac_var in $ac_subst_vars
     do
@@ -2333,11 +2337,9 @@
     echo
 
     if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------------- ##
+      $as_echo "## ------------------- ##
 ## File substitutions. ##
-## ------------------- ##
-_ASBOX
+## ------------------- ##"
       echo
       for ac_var in $ac_subst_files
       do
@@ -2351,11 +2353,9 @@
     fi
 
     if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
+      $as_echo "## ----------- ##
 ## confdefs.h. ##
-## ----------- ##
-_ASBOX
+## ----------- ##"
       echo
       cat confdefs.h
       echo
@@ -2410,7 +2410,12 @@
 ac_site_file1=NONE
 ac_site_file2=NONE
 if test -n "$CONFIG_SITE"; then
-  ac_site_file1=$CONFIG_SITE
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
 elif test "x$prefix" != xNONE; then
   ac_site_file1=$prefix/share/config.site
   ac_site_file2=$prefix/etc/config.site
@@ -2425,7 +2430,11 @@
     { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
 $as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
   fi
 done
 
@@ -2506,7 +2515,7 @@
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
   { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
 fi
 ## -------------------- ##
 ## Main body of script. ##
@@ -2680,7 +2689,7 @@
 	    g | gt | gtk  )	val=gtk ;;
 	    gtk3  )	val=gtk3 ;;
 	    * )
-as_fn_error "\`--with-x-toolkit=$withval' is invalid;
+as_fn_error $? "\`--with-x-toolkit=$withval' is invalid;
 this option's value should be \`yes', \`no', \`lucid', \`athena', \`motif', \`gtk' or
 \`gtk3'.  \`yes' and \`gtk' are synonyms. \`athena' and \`lucid' are synonyms." "$LINENO" 5
 	    ;;
@@ -2983,7 +2992,7 @@
 	stringfreelist) ac_gc_check_string_free_list=1 ;;
 	xmallocoverrun)	ac_xmalloc_overrun=1 ;;
 	conslist)	ac_gc_check_cons_list=1 ;;
-	*)	as_fn_error "unknown check category $check" "$LINENO" 5 ;;
+	*)	as_fn_error $? "unknown check category $check" "$LINENO" 5 ;;
 	esac
 done
 IFS="$ac_save_IFS"
@@ -3098,16 +3107,22 @@
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  for ac_t in install-sh install.sh shtool; do
-    if test -f "$ac_dir/$ac_t"; then
-      ac_aux_dir=$ac_dir
-      ac_install_sh="$ac_aux_dir/$ac_t -c"
-      break 2
-    fi
-  done
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
 done
 if test -z "$ac_aux_dir"; then
-  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
 fi
 
 # These three variables are undocumented and unsupported,
@@ -3121,7 +3136,7 @@
 
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
 $as_echo_n "checking build system type... " >&6; }
@@ -3132,16 +3147,16 @@
 test "x$ac_build_alias" = x &&
   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
 test "x$ac_build_alias" = x &&
-  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -3166,7 +3181,7 @@
   ac_cv_host=$ac_cv_build
 else
   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
 fi
 
 fi
@@ -3174,7 +3189,7 @@
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -3468,7 +3483,7 @@
 
 
 if test $unported = yes; then
-  as_fn_error "Emacs hasn't been ported to \`${canonical}' systems.
+  as_fn_error $? "Emacs hasn't been ported to \`${canonical}' systems.
 Check \`etc/MACHINES' for recognized configuration names." "$LINENO" 5
 fi
 
@@ -3782,8 +3797,8 @@
 
 test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "no acceptable C compiler found in \$PATH
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
 
 # Provide some information about the compiler.
 $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -3897,9 +3912,8 @@
 
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "C compiler cannot create executables
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
@@ -3941,8 +3955,8 @@
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest conftest$ac_cv_exeext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -3999,9 +4013,9 @@
     else
 	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run C compiled programs.
+as_fn_error $? "cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5; }
     fi
   fi
 fi
@@ -4052,8 +4066,8 @@
 
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
@@ -4385,7 +4399,7 @@
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -4401,11 +4415,11 @@
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
   break
 fi
@@ -4444,7 +4458,7 @@
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -4460,18 +4474,18 @@
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
 
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 
 ac_ext=c
@@ -4532,7 +4546,7 @@
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_GREP"; then
-    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_GREP=$GREP
@@ -4598,7 +4612,7 @@
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_EGREP"; then
-    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_EGREP=$EGREP
@@ -4730,8 +4744,7 @@
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
 "
-eval as_val=\$$as_ac_Header
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -4975,7 +4988,7 @@
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -4991,11 +5004,11 @@
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
   break
 fi
@@ -5034,7 +5047,7 @@
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -5050,18 +5063,18 @@
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
 
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 
 ac_ext=c
@@ -5498,7 +5511,7 @@
   if test "x${with_makeinfo}" = "xno"; then
     MAKEINFO=off
   elif test ! -e $srcdir/info/emacs; then
-    as_fn_error "You do not seem to have makeinfo >= 4.6, and your
+    as_fn_error $? "You do not seem to have makeinfo >= 4.6, and your
 source tree does not seem to have pre-built manuals in the \`info' directory.
 Either install a suitable version of makeinfo, or re-run configure
 with the \`--without-makeinfo' option to build without the manuals. " "$LINENO" 5
@@ -5657,7 +5670,7 @@
     if test "x$GCC" = "xyes"; then
       C_SWITCH_MACHINE="-fno-common"
     else
-      as_fn_error "What gives?  Fix me if DEC Unix supports ELF now." "$LINENO" 5
+      as_fn_error $? "What gives?  Fix me if DEC Unix supports ELF now." "$LINENO" 5
     fi
   else
     UNEXEC_OBJ=unexalpha.o
@@ -5935,7 +5948,7 @@
   ## Some platforms don't use any of these files, so it is not
   ## appropriate to put this test outside the if block.
   test -e $CRT_DIR/crtn.o || test -e $CRT_DIR/crt0.o || \
-    as_fn_error "crt*.o not found in specified location." "$LINENO" 5
+    as_fn_error $? "crt*.o not found in specified location." "$LINENO" 5
 
 fi
 
@@ -5990,8 +6003,7 @@
 do :
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -6182,7 +6194,7 @@
 fi
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
       if test "$emacs_alsa_subdir" != yes; then
-        as_fn_error "pkg-config found alsa, but it does not compile.  See config.log for error messages." "$LINENO" 5
+        as_fn_error $? "pkg-config found alsa, but it does not compile.  See config.log for error messages." "$LINENO" 5
       fi
       ALSA_CFLAGS="$ALSA_CFLAGS -DALSA_SUBDIR_INCLUDE"
     fi
@@ -6217,8 +6229,7 @@
 do :
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -7273,7 +7284,7 @@
 
      ;; #(
    *)
-     as_fn_error "unknown endianness
+     as_fn_error $? "unknown endianness
  presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
  esac
 
@@ -7282,7 +7293,7 @@
 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
 set x ${MAKE-make}
 ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -7290,7 +7301,7 @@
 all:
 	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
 case `${MAKE-make} -f conftest.make 2>/dev/null` in
   *@@@%%%=?*=@@@%%%*)
     eval ac_cv_prog_make_${ac_make}_set=yes;;
@@ -7426,7 +7437,7 @@
   have_x=disabled
 else
   case $x_includes,$x_libraries in #(
-    *\'*) as_fn_error "cannot use X directory names containing '" "$LINENO" 5;; #(
+    *\'*) as_fn_error $? "cannot use X directory names containing '" "$LINENO" 5;; #(
     *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
@@ -7444,7 +7455,7 @@
 	@echo libdir='${LIBDIR}'
 _ACEOF
   if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then
-    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+    # GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
     for ac_var in incroot usrlibdir libdir; do
       eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`"
     done
@@ -7530,7 +7541,7 @@
   fi
 done
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 fi # $ac_x_includes = no
 
 if test "$ac_x_libraries" = no; then
@@ -7713,7 +7724,7 @@
 if test "x$ac_cv_header_AppKit_AppKit_h" = x""yes; then :
   HAVE_NS=yes
 else
-  as_fn_error "\`--with-ns' was specified, but the include
+  as_fn_error $? "\`--with-ns' was specified, but the include
   files are missing or cannot be compiled." "$LINENO" 5
 fi
 
@@ -7829,7 +7840,7 @@
    if test "$HAVE_XSERVER" = true ||
       test -n "$DISPLAY" ||
       test "`echo /usr/lib/libX11.*`" != "/usr/lib/libX11.*"; then
-        as_fn_error "You seem to be running X, but no X development libraries
+        as_fn_error $? "You seem to be running X, but no X development libraries
 were found.  You should install the relevant development files for X
 and for the toolkit you want, such as Gtk+, Lesstif or Motif.  Also make
 sure you have development files for image handling, i.e.
@@ -7952,8 +7963,7 @@
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
 "
-eval as_val=\$$as_ac_Header
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -8059,6 +8069,7 @@
 main ()
 {
   char *data, *data2, *data3;
+  const char *cdata2;
   int i, pagesize;
   int fd, fd2;
 
@@ -8083,10 +8094,10 @@
   fd2 = open ("conftest.txt", O_RDWR | O_CREAT | O_TRUNC, 0600);
   if (fd2 < 0)
     return 4;
-  data2 = "";
-  if (write (fd2, data2, 1) != 1)
+  cdata2 = "";
+  if (write (fd2, cdata2, 1) != 1)
     return 5;
-  data2 = mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, 0L);
+  data2 = (char *) mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, 0L);
   if (data2 == MAP_FAILED)
     return 6;
   for (i = 0; i < pagesize; ++i)
@@ -8459,8 +8470,7 @@
 do :
   as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
 ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
 _ACEOF
@@ -8862,7 +8872,7 @@
   fi
 
   if test "$pkg_check_gtk" = "no" && test "$USE_X_TOOLKIT" != "maybe"; then
-     as_fn_error "$GTK_PKG_ERRORS" "$LINENO" 5
+     as_fn_error $? "$GTK_PKG_ERRORS" "$LINENO" 5
   fi
 fi
 
@@ -8968,7 +8978,7 @@
   fi
 
   if test "$pkg_check_gtk" = "no" && test "$USE_X_TOOLKIT" != "maybe"; then
-     as_fn_error "$GTK_PKG_ERRORS" "$LINENO" 5
+     as_fn_error $? "$GTK_PKG_ERRORS" "$LINENO" 5
   fi
 fi
 fi
@@ -8995,7 +9005,7 @@
 
   if test "${GTK_COMPILES}" != "yes"; then
     if test "$USE_X_TOOLKIT" != "maybe"; then
-      as_fn_error "Gtk+ wanted, but it does not compile, see config.log.  Maybe some x11-devel files missing?" "$LINENO" 5;
+      as_fn_error $? "Gtk+ wanted, but it does not compile, see config.log.  Maybe some x11-devel files missing?" "$LINENO" 5;
     fi
   else
     HAVE_GTK=yes
@@ -9125,8 +9135,7 @@
 do :
   as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
 ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
 _ACEOF
@@ -9607,7 +9616,7 @@
       USE_X_TOOLKIT=LUCID
       LUCID_LIBW=-lXaw
     elif test x"${USE_X_TOOLKIT}" = xLUCID; then
-      as_fn_error "Lucid toolkit requires X11/Xaw include files" "$LINENO" 5
+      as_fn_error $? "Lucid toolkit requires X11/Xaw include files" "$LINENO" 5
     else
       { $as_echo "$as_me:${as_lineno-$LINENO}: result: no; do not use toolkit by default" >&5
 $as_echo "no; do not use toolkit by default" >&6; }
@@ -10784,8 +10793,7 @@
 do :
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -11037,7 +11045,7 @@
     MISSING="$MISSING libtiff" && WITH_NO="$WITH_NO --with-tiff=no"
 
   if test "X${MISSING}" != X; then
-    as_fn_error "The following required libraries were not found:
+    as_fn_error $? "The following required libraries were not found:
     $MISSING
 Maybe some development libraries/packages are missing?
 If you don't want to link with them give
@@ -11526,8 +11534,7 @@
   for ac_func in _getb67 GETB67 getb67; do
     as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
 ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
 
 cat >>confdefs.h <<_ACEOF
 #define CRAY_STACKSEG_END $ac_func
@@ -11591,7 +11598,7 @@
 
 
 if test x"$ac_cv_func_alloca_works" != xyes; then
-   as_fn_error "a system implementation of alloca is required " "$LINENO" 5
+   as_fn_error $? "a system implementation of alloca is required " "$LINENO" 5
 fi
 
 # fmod, logb, and frexp are found in -lm on most systems.
@@ -11787,7 +11794,7 @@
 
 
   if test $ac_cv_prog_liblockfile = yes; then
-    as_fn_error "Shared liblockfile found but can't link against it.
+    as_fn_error $? "Shared liblockfile found but can't link against it.
 This probably means that movemail could lose mail.
 There may be a \`development' package to install containing liblockfile." "$LINENO" 5
   fi
@@ -11876,8 +11883,7 @@
 do :
   as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
 ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
 _ACEOF
@@ -11908,8 +11914,7 @@
 do :
   as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
 ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
 _ACEOF
@@ -11961,8 +11966,8 @@
 static time_t time_t_min;
 
 /* Values we'll use to set the TZ environment variable.  */
-static char *tz_strings[] = {
-  (char *) 0, "TZ=GMT0", "TZ=JST-9",
+static const char *tz_strings[] = {
+  (const char *) 0, "TZ=GMT0", "TZ=JST-9",
   "TZ=EST+3EDT+2,M10.1.0/00:00:00,M2.3.0/00:00:00"
 };
 #define N_STRINGS (sizeof (tz_strings) / sizeof (tz_strings[0]))
@@ -11979,7 +11984,7 @@
      instead of "TZ=America/Vancouver" in order to detect the bug even
      on systems that don't support the Olson extension, or don't have the
      full zoneinfo tables installed.  */
-  putenv ("TZ=PST8PDT,M4.1.0,M10.5.0");
+  putenv ((char*) "TZ=PST8PDT,M4.1.0,M10.5.0");
 
   tm.tm_year = 98;
   tm.tm_mon = 3;
@@ -11992,16 +11997,14 @@
 }
 
 static int
-mktime_test1 (now)
-     time_t now;
+mktime_test1 (time_t now)
 {
   struct tm *lt;
   return ! (lt = localtime (&now)) || mktime (lt) == now;
 }
 
 static int
-mktime_test (now)
-     time_t now;
+mktime_test (time_t now)
 {
   return (mktime_test1 (now)
 	  && mktime_test1 ((time_t) (time_t_max - now))
@@ -12025,8 +12028,7 @@
 }
 
 static int
-bigtime_test (j)
-     int j;
+bigtime_test (int j)
 {
   struct tm tm;
   time_t now;
@@ -12070,7 +12072,7 @@
      instead of "TZ=America/Vancouver" in order to detect the bug even
      on systems that don't support the Olson extension, or don't have the
      full zoneinfo tables installed.  */
-  putenv ("TZ=PST8PDT,M4.1.0,M10.5.0");
+  putenv ((char*) "TZ=PST8PDT,M4.1.0,M10.5.0");
 
   t = mktime (&tm);
 
@@ -12105,7 +12107,7 @@
   for (i = 0; i < N_STRINGS; i++)
     {
       if (tz_strings[i])
-	putenv (tz_strings[i]);
+	putenv ((char*) tz_strings[i]);
 
       for (t = 0; t <= time_t_max - delta; t += delta)
 	if (! mktime_test (t))
@@ -12157,7 +12159,7 @@
 
 # Make sure getloadavg.c is where it belongs, at configure-time.
 test -f "$srcdir/$ac_config_libobj_dir/getloadavg.c" ||
-  as_fn_error "$srcdir/$ac_config_libobj_dir/getloadavg.c is missing" "$LINENO" 5
+  as_fn_error $? "$srcdir/$ac_config_libobj_dir/getloadavg.c is missing" "$LINENO" 5
 
 ac_save_LIBS=$LIBS
 
@@ -13026,7 +13028,7 @@
 fi
 
 if test "$have_tputs_et_al" != true; then
-  as_fn_error "I couldn't find termcap functions (tputs and friends).
+  as_fn_error $? "I couldn't find termcap functions (tputs and friends).
 Maybe some development libraries/packages are missing?  Try installing
 libncurses-dev(el), libterminfo-dev(el) or similar." "$LINENO" 5
 fi
@@ -14152,8 +14154,7 @@
 do :
   as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
 ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
 _ACEOF
@@ -14527,14 +14528,14 @@
    && test x"`$CC --version 2> /dev/null | grep 'gcc.* 4.5.0'`" != x \
    && test x"`echo $CFLAGS | grep '\-O[23]'`" != x \
    && test x"`echo $CFLAGS | grep '\-fno-optimize-sibling-calls'`" = x; then
-   as_fn_error "GCC 4.5.0 has problems compiling Emacs; see etc/PROBLEMS'." "$LINENO" 5
+   as_fn_error $? "GCC 4.5.0 has problems compiling Emacs; see etc/PROBLEMS'." "$LINENO" 5
 fi
 
 #### Find out which version of Emacs this is.
 version=`grep 'const char emacs_version' ${srcdir}/src/emacs.c \
 	 | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`
 if test x"${version}" = x; then
-  as_fn_error "can't find current emacs version in \`${srcdir}/src/emacs.c'." "$LINENO" 5
+  as_fn_error $? "can't find current emacs version in \`${srcdir}/src/emacs.c'." "$LINENO" 5
 fi
 if test x"${version}" != x"$PACKAGE_VERSION"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: version mismatch between \`${srcdir}/configure.in' and \`${srcdir}/src/emacs.c'." >&5
@@ -15090,6 +15091,7 @@
 
 ac_libobjs=
 ac_ltlibobjs=
+U=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
@@ -15252,19 +15254,19 @@
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
 # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
 as_fn_error ()
 {
-  as_status=$?; test $as_status -eq 0 && as_status=1
-  if test "$3"; then
-    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
-  fi
-  $as_echo "$as_me: error: $1" >&2
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
   as_fn_exit $as_status
 } # as_fn_error
 
@@ -15460,7 +15462,7 @@
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 
 
 } # as_fn_mkdir_p
@@ -15514,7 +15516,7 @@
 # values after options handling.
 ac_log="
 This file was extended by emacs $as_me 24.0.50, which was
-generated by GNU Autoconf 2.65.  Invocation command line was
+generated by GNU Autoconf 2.67.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -15580,10 +15582,10 @@
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 emacs config.status 24.0.50
-configured by $0, generated by GNU Autoconf 2.65,
+configured by $0, generated by GNU Autoconf 2.67,
   with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -15599,11 +15601,16 @@
 while test $# != 0
 do
   case $1 in
-  --*=*)
+  --*=?*)
     ac_option=`expr "X$1" : 'X\([^=]*\)='`
     ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
   *)
     ac_option=$1
     ac_optarg=$2
@@ -15625,6 +15632,7 @@
     $ac_shift
     case $ac_optarg in
     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
     esac
     as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
@@ -15637,7 +15645,7 @@
     ac_need_defaults=false;;
   --he | --h)
     # Conflict between --help and --header
-    as_fn_error "ambiguous option: \`$1'
+    as_fn_error $? "ambiguous option: \`$1'
 Try \`$0 --help' for more information.";;
   --help | --hel | -h )
     $as_echo "$ac_cs_usage"; exit ;;
@@ -15646,7 +15654,7 @@
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) as_fn_error "unrecognized option: \`$1'
+  -*) as_fn_error $? "unrecognized option: \`$1'
 Try \`$0 --help' for more information." ;;
 
   *) as_fn_append ac_config_targets " $1"
@@ -15714,7 +15722,7 @@
     "leim/Makefile") CONFIG_FILES="$CONFIG_FILES leim/Makefile" ;;
     "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
 
-  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
@@ -15752,7 +15760,7 @@
 {
   tmp=./conf$$-$RANDOM
   (umask 077 && mkdir "$tmp")
-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
 
 # Set up the scripts for CONFIG_FILES section.
 # No need to generate them if there are no CONFIG_FILES.
@@ -15786,7 +15794,7 @@
 fi
 ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
 if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\r'
+  ac_cs_awk_cr='\\r'
 else
   ac_cs_awk_cr=$ac_cr
 fi
@@ -15803,7 +15811,7 @@
   echo "_ACEOF"
 } >conf$$files.sh &&
 . ./conf$$files.sh ||
-  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
 rm -f conf$$files.sh
 
 {
@@ -15811,18 +15819,18 @@
   echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
   echo "_ACEOF"
 } >conf$$subs.sh ||
-  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   . ./conf$$subs.sh ||
-    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
 
   ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
   if test $ac_delim_n = $ac_delim_num; then
     break
   elif $ac_last_try; then
-    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
@@ -15917,20 +15925,28 @@
 else
   cat
 fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
-  || as_fn_error "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
 # trailing colons and then remove the whole line if VPATH becomes empty
 # (actually we leave an empty line to preserve line numbers).
 if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[	 ]*\):*/\1/
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
 s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
 s/^[^=]*=[	 ]*$//
 }'
 fi
@@ -15958,7 +15974,7 @@
   if test -z "$ac_t"; then
     break
   elif $ac_last_try; then
-    as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
@@ -16043,7 +16059,7 @@
 _ACAWK
 _ACEOF
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-  as_fn_error "could not setup config headers machinery" "$LINENO" 5
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
 fi # test -n "$CONFIG_HEADERS"
 
 
@@ -16056,7 +16072,7 @@
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -16084,7 +16100,7 @@
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
@@ -16111,7 +16127,7 @@
 
     case $ac_tag in
     *:-:* | *:-) cat >"$tmp/stdin" \
-      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
     esac
     ;;
   esac
@@ -16247,22 +16263,22 @@
 else
   $AWK -f "$tmp/subs.awk" | $SHELL
 fi >$tmp/out \
-  || as_fn_error "could not create $ac_file" "$LINENO" 5
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
   { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
   { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&5
+which seems to be undefined.  Please make sure it is defined" >&5
 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&2;}
+which seems to be undefined.  Please make sure it is defined" >&2;}
 
   rm -f "$tmp/stdin"
   case $ac_file in
   -) cat "$tmp/out" && rm -f "$tmp/out";;
   *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
   esac \
-  || as_fn_error "could not create $ac_file" "$LINENO" 5
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
  ;;
   :H)
   #
@@ -16273,19 +16289,19 @@
       $as_echo "/* $configure_input  */" \
       && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
     } >"$tmp/config.h" \
-      || as_fn_error "could not create $ac_file" "$LINENO" 5
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
     if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
       { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
 $as_echo "$as_me: $ac_file is unchanged" >&6;}
     else
       rm -f "$ac_file"
       mv "$tmp/config.h" "$ac_file" \
-	|| as_fn_error "could not create $ac_file" "$LINENO" 5
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
     fi
   else
     $as_echo "/* $configure_input  */" \
       && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
-      || as_fn_error "could not create -" "$LINENO" 5
+      || as_fn_error $? "could not create -" "$LINENO" 5
   fi
  ;;
 
@@ -16322,7 +16338,7 @@
 ac_clean_files=$ac_clean_files_save
 
 test $ac_write_fail = 0 ||
-  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
 
 
 # configure is writing to config.log, and then calls config.status.
@@ -16343,7 +16359,7 @@
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit $?
+  $ac_cs_success || as_fn_exit 1
 fi
 if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5