Mercurial > emacs
changeset 82624:713031228249
Move refcards from etc/ to etc/refcards/
| author | Glenn Morris <rgm@gnu.org> |
|---|---|
| date | Wed, 22 Aug 2007 07:18:00 +0000 |
| parents | aa4d41e0f02f |
| children | d7537f519ef8 |
| files | etc/gnus-refcard.tex |
| diffstat | 1 files changed, 0 insertions(+), 1424 deletions(-) [+] |
line wrap: on
line diff
--- a/etc/gnus-refcard.tex Wed Aug 22 07:17:54 2007 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1424 +0,0 @@ -\documentclass{article} - -% Previously we had five input LaTeX files (booklet.tex bk-lt.tex bk-a4.tex -% refcard.tex gnusref.tex) and two logo files (gnuslogo-refcard.eps and -% gnuslogo-booklet.eps). -% -% From this LaTeX file (gnus-refcard.tex) plus a single logo (gnus-logo.eps), -% we can generate the refcard and the booklet version. This simplifies to -% distribute the refcard with Emacs. Appropriate Makefile rules were added in -% gnus/texi/Makefile. - -% For Emacs, we may use the following commands (w/o) using Gnus' Makefile: -% -% latex gnus-refcard.tex && -% dvips -t letter -f gnus-refcard.dvi > gnus-refcard.ps -% -% latex '\def\booklettrue{}\def\letterpapertrue{}\input{gnus-refcard}' && -% mv gnus-refcard.dvi gnus-booklet.dvi && -% dvips -t letter -f gnus-booklet.dvi > gnus-booklet.ps - -\usepackage{ifthen} -\ifthenelse{\isundefined{\booklettrue}}{ - \typeout{Creating reference card...} -}{ - \typeout{Creating reference booklet...}} - -\usepackage{supertabular} - -\newlength{\logowidth} \setlength{\logowidth} {6.861in} -\newlength{\logoheight} \setlength{\logoheight}{7.013in} - -\usepackage{graphicx} - -\usepackage{geometry} - -\ifthenelse{\isundefined{\booklettrue}}{% ifcard %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - % Reference Card - - \def\Guide{Card}\def\guide{card} - \def\logoscale{0.25} - - % Page setup for the refcard: - - % \setlength{\textwidth}{7.26in} \setlength{\textheight}{10in} - % \setlength{\topmargin}{-1.0in} - % % the same settings work for A4, although there is a bit of space at the - % % top and bottom of the page. - % \setlength{\oddsidemargin}{-0.5in} \setlength{\evensidemargin}{-0.5in} - - \ifthenelse{\isundefined{\letterpapertrue}}{ - \geometry{a4paper,hmargin=10mm,tmargin=10mm,bmargin=35mm} - }{ - \geometry{hmargin=20mm,tmargin=10mm,bmargin=12mm} - } - -}{ %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - % Reference Booklet - - \def\Guide{Booklet}\def\guide{booklet} - \def\logoscale{0.5}% FIXME: too large for 2up printing? --rsteib - - \ifthenelse{\isundefined{\letterpapertrue}}{ - \geometry{a5paper,hmargin=10mm,tmargin=10mm,bmargin=4mm} - }{ - \geometry{a5paper,hmargin=20mm,tmargin=10mm,bmargin=4mm} - } - - \def\sec{\section} - \def\subsec{\subsection} - \def\subsubsec{\subsubsection} - \def\blankpage{\vspace*{\fill}\par - %\centerline{(This page intentionally left blank.)} - \par\vspace*{\fill}\pagebreak} -}%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -% \input{gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % % -%% include file for the Gnus refcard and booklet - -\def\progver{5.11} % program version -% \def\refver{5.10-2} % refcard version (not used) -\def\date{April, 2006} -\def\author{Gnus Bugfixing Girls + Boys $<$bugs@gnus.org$>$} - -%% -\newlength{\keycolwidth} -\newenvironment{keys}[1]% #1 is the widest key -{\nopagebreak%\noindent% - \settowidth{\keycolwidth}{#1}% - \addtolength{\keycolwidth}{\tabcolsep}% - \addtolength{\keycolwidth}{-\columnwidth}% - \begin{supertabular}{@{}l@{\hspace{\tabcolsep}}p{-\keycolwidth}@{}}}% - {\end{supertabular}\\} - -%% uncomment the first definition if you do not want pagebreaks in maps -%%\newcommand{\esamepage}{\samepage} -\newcommand{\esamepage}{} - -\newcommand*{\B}[1]{{\bf#1})} % bold l)etter - -\newcommand{\Title}{% - \begin{center} - {\bf\LARGE Gnus \progver\ Reference \Guide\\} - %{\normalsize \Guide\ version \refver} - \end{center} - } - -% \newcommand*{\LogoOLD}[1]{\centerline{% -% \makebox[\logoscale\logowidth][l]{\vbox to \logoscale\logoheight -% {\vfill\epsfig{figure=gnuslogo-#1}}\vspace{-\baselineskip}}}} - -\newcommand*{\Logo}[1]{\centerline{% - \includegraphics[width=\logoscale\logowidth]{gnus-logo}}} - -%% Contributions by: -%% 1995 Vladimir Alexiev <vladimir@cs.ualberta.ca> -%% 2000 Felix Natter <fnatter@gmx.net> -%% 2001, 2002, 2003, 2005 \author. -%% Original Gnus manual 1994 Lars Magne Ingebrigtsen -%% Some material from Emacs Help Bindings feature (C-h b). -%% Gnus logo by Luis Fernandes. -\newcommand{\Copyright}{% - \begin{center} - Copyright \copyright\ 1995, 2000, 2002, 2003, 2004, - 2005, 2006, 2007 Free Software Foundation, Inc. - \end{center} - - Permission is granted to make and distribute copies of this reference - \guide{} provided the copyright notice and this permission are preserved on - all copies. Please send corrections, additions and suggestions to the - current maintainer's email address. \Guide{} last edited on \date. - } - -\newcommand{\Notes}{% - \subsection*{Notes} - {\esamepage - Gnus is complex. Currently it has some 876 interactive (user-callable) - functions. Of these 618 are in the two major modes (Group and - Summary/Article). Many of these functions have more than one binding, some - have 3 or even 4 bindings. The total number of keybindings is 677. So in - order to save 40\% space, every function is listed only once on this - \guide, under the ``more logical'' binding. Alternative bindings are given - in parentheses in the beginning of the description. - - Many Gnus commands are affected by the numeric prefix. Normally you enter a - prefix by holding the Meta key and typing a number, but in most Gnus modes - you don't need to use Meta since the digits are not self-inserting. The - prefixed behavior of commands is given in [brackets]. Often the prefix is - used to specify: - - \quad [distance] How many objects to move the point over. - - \quad [scope] How many objects to operate on (including the current one). - - \quad [p/p] The ``Process/Prefix Convention'': If a prefix is given then it - determines how many objects to operate on. Else if there are some objects - marked with the process mark \#, these are operated on. Else only the - current object is affected. - - \quad [level] A group subscribedness level. Only groups with a lower or - equal level will be affected by the operation. If no prefix is given, - `gnus-group-default-list-level' is used. If - `gnus-group-use-permanent-levels', then a prefix to the `g' and `l' - commands will also set the default level. - - \quad [score] An article score. If no prefix is given, - `gnus-summary-default-score' is used. \\*[\baselineskip] - % some keys - Gnus startup-commands:\\* - \begin{keys}{M-x gnus-unplugged} - M-x gnus & start Gnus. \\ - M-x gnus-no-server & start Gnus without connecting to server - (i.e. to read mail). \\ - \end{keys} - Additionally, there are the two commands \texttt{gnus-plugged} and - \texttt{gnus-unplugged}, which are only used if you want to download - news and/or read previously downloaded news offline (see C-c C-i g Gnus - Unplugged RET). Note: \texttt{gnus-no-server} ignores the stuff in - \texttt{gnus-agent-directory}, and thus does not allow you to use Gnus - Unplugged. - % - \begin{keys}{C-c C-i} - C-c C-i & Go to the Gnus online {\bf info}.\\ - C-c C-b & Send a Gnus {\bf bug} report.\\ - \end{keys} - }} - -\newcommand{\GroupLevels}{% - The table below assumes that you use the default Gnus levels. - Fill your user-specific levels in the blank cells.\\[1\baselineskip] - \begin{tabular}{|c|l|l|} - \hline - Level & Groups & Status \\ - \hline - 1 & draft/mail groups & \\ - 2 & mail groups & \\ - 3 & & subscribed \\ - 4 & & \\ - 5 & default list level & \\ - \hline - 6 & & unsubscribed \\ - 7 & & \\ - \hline - 8 & & zombies \\ - \hline - 9 & & killed \\ - \hline - \end{tabular}} - -\newcommand{\MarkCharacters}{% - {\esamepage If a command directly sets a mark, it is shown in parentheses.\\* - \newlength{\markcolwidth} - \settowidth{\markcolwidth}{` '}% widest character - \addtolength{\markcolwidth}{4\tabcolsep} - \addtolength{\markcolwidth}{-\columnwidth} - \newlength{\markdblcolwidth} - \setlength{\markdblcolwidth}{\columnwidth} - \addtolength{\markdblcolwidth}{-2\tabcolsep} - \begin{tabular}{|c|p{-\markcolwidth}|} - \hline - \multicolumn{2}{|p{\markdblcolwidth}|}{{\bf ``Read'' Marks.} - All these marks appear in the first column of the summary line, and so - are mutually exclusive.}\\ - \hline - ` ' & (M-u, M SPC, M c) Not read.\\ - ! & (!, M !, M t) Ticked (interesting).\\ - ? & (?, M ?) Dormant (only followups are interesting).\\ - E & (E, M e, M x) {\bf Expirable}. Only has effect in mail groups.\\ - G & (C, B DEL) Canceled article (or deleted in mailgroups).\\ - \$ & (M-d, M s x, S x). Marked as spam.\\ - \hline\hline - \multicolumn{2}{|p{\markdblcolwidth}|} - {The marks below mean that the article - is read (killed, uninteresting), and have more or less the same effect. - Some commands however explicitly differentiate between them (e.g.\ M - M-C-r, adaptive scoring).}\\ - \hline - r & (d, M d, M r) Deleted (marked as {\bf read}).\\ - C & (M C; M C-c; M H; c, Z c; Z n; Z C) Killed by {\bf catch-up}.\\ - F & SOUPed article. See the manual.\\ - O & {\bf Old} (read in a previous session).\\ - K & (k, M k; C-k, M K) {\bf Killed}.\\ - M & Article marked as read by duplicate suppression.\\ - Q & Article is part of a sparse thread (see ``Threading'' - in the manual).\\ - R & {\bf Read} (viewed in actuality).\\ - X & Killed by a kill file.\\ - Y & Killed due to low score.\\ - \hline\multicolumn{2}{c}{\vspace{1ex}}\\\hline - \multicolumn{2}{|p{\markdblcolwidth}|} - {{\bf Marks not affecting visibility}}\\ - \hline - \# & (\#, M \#, M P p) Processable (will be affected by the next operation). - [2]\\ - A & {\bf Answered} (followed-up or replied). [2]\\ - F & Forwarded. [2]\\ - $\ast$ & Cached. [2]\\ - S & Saved. [2]\\ - N & Recently arrived. [2]\\ - . & Unseen. [2]\\ - + & Over default score. [3]\\ - $-$ & Under default score. [3]\\ - $=$ & Has children (thread underneath it). Add `\%e' to - `gnus-summary-line-format'. [3]\\ - \hline - \end{tabular} - }} - -\newcommand{\GroupModeGeneral}{% - \begin{keys}{C-c M-C-x} - RET & (=) Enter this group. [Prefix: how many (read) articles to fetch. - Positive: newest articles, negative: oldest ones; non-numerical: - view all articles, not just unread]\\ - M-RET & Enter group quickly.\\ - M-SPC & Same as RET but does not expunge and hide dormants.\\ - M-C-RET & Enter group without any processing, changes will not be permanent.\\ - SPC & Select this group and display the first (unread) article. [Same - prefix as above.]\\ - ? & Give a very short help message.\\ - $<$ & Go to the beginning of the Group buffer.\\ - $>$ & Go to the end of the Group buffer.\\ - , & Jump to the lowest-level group with unread articles.\\ - . & Jump to the first group with unread articles.\\ - \^{} & Enter the Server buffer mode.\\ - a & Post an {\bf article} to a group - [Prefix: use group under point to find posting-style].\\ - b & Find {\bf bogus} groups and delete them.\\ - c & Mark all unticked articles in this group as read ({\bf catch-up}). - [p/p]\\ - g & Check the server for new articles ({\bf get}). [level]\\ - M-g & Check the server for new articles in this group ({\bf get}). [p/p]\\ - j & {\bf Jump} to a group.\\ - m & {\bf Mail} a message to someone - [Prefix: use group under point to find posting-style].\\ - n & Go to the {\bf next} group with unread articles. [distance]\\ - M-n & Go to the {\bf next} group on the same or lower level. - [distance]\\ - p & (DEL) Go to the {\bf previous} group with unread articles. - [distance]\\ - M-p & Go to the {\bf previous} group on the same or lower level. [distance]\\ - q & {\bf Quit} Gnus.\\ - r & Re-read the init file ({\bf reset}).\\ - s & {\bf Save} the `.newsrc.eld' file (and `.newsrc' if - `gnus-save-newsrc-file').\\ - z & Suspend (kill all buffers of) Gnus.\\ - B & {\bf Browse} a foreign server.\\ - C & Mark all articles in this group as read ({\bf Catch-up}). [p/p]\\ - F & {\bf Find} new groups and process them.\\ - N & Go to the {\bf next} group. [distance]\\ - P & Go to the {\bf previous} group. [distance]\\ - Q & {\bf Quit} Gnus without saving any startup (.newsrc) files.\\ - R & {\bf Restart} Gnus.\\ - Z & Clear the dribble buffer.\\ - M-c & Clear data from group (marks and list of read articles). \\ - C-c C-s & {\bf Sort} the groups by name, number of unread articles, or level - (depending on `gnus-group-sort-function').\\ - C-c C-x & Run all expirable articles in this group through the {\bf expiry} - process.\\ - C-c M-C-x & Run all articles in all groups through the {\bf expiry} process.\\ - C-c M-g & Activate all {\bf groups}.\\ - C-c C-i & Gnus online-manual ({\bf info}).\\ - C-x C-t & {\bf Transpose} two groups.\\ - H f & Fetch this group's {\bf FAQ} (using ange-ftp).\\ - H c & Display this group's {\bf charter}. [Prefix: query for group]\\ - H C & Display this group's {\bf control message} (using - ange-ftp). [Prefix: query for group]\\ - H v & (V) Display the Gnus {\bf version} number.\\ - H d & (C-c C-d) Show the {\bf description} of this group - [Prefix: re-read from server].\\ - M-d & {\bf Describe} all groups. [Prefix: re-read from server]\\ - D g & Regenerate a Sieve script from group parameters.\\ - D u & Regenerate Sieve script and {\bf upload} to server.\\ - \end{keys} - } - -\newcommand{\ListGroups}{% - {\esamepage - \begin{keys}{A M} - A d & (C-c C-M-a) List all groups whose names or {\bf descriptions} match a regexp.\\ - A k & (C-c C-l) List all {\bf killed} groups. - [Prefix: look at active-file from server]\\ - A l & List all groups on a specific level. - [Prefix: also list groups with no unread articles]\\ - A a & (C-c C-a) List all groups whose names match a regexp - ({\bf apropos}).\\ - A A & List the server's active-file.\\ - A M & List groups that {\bf match} a regexp.\\ - A m & List groups that {\bf match} a regexp and have unread articles. - [level]\\ - A s & (l) List all {\bf subscribed} groups with unread articles. - [level; 5 and lower is the default]\\ - A u & (L) List all groups (including read and {\bf unsubscribed}). - [level; 7 and lower is the default]\\ - A z & List all {\bf zombie} groups.\\ - A c & List all groups with cached articles. [level]\\ - A ? & List all groups with dormant articles. [level]\\ - \end{keys} - } - - \newcommand{\CreateEditGroups}{% - {\esamepage - The select methods are indicated in parentheses.\\* - \begin{keys}{G DEL} - G a & Make the Gnus list {\bf archive} group. (nndir over ange-ftp)\\ - G c & {\bf Customize} this group's parameters.\\ - G d & Make a {\bf directory} group (every file must be a posting and files - must have numeric names). (nndir)\\ - G D & Enter a {\bf directory} as a (temporary) group. - (nneething without recording articles read)\\ - G e & (M-e) {\bf Edit} this group's select method.\\ - G E & {\bf Edit} this group's info (select method, articles read, etc).\\ - G f & Make a group based on a {\bf file}. (nndoc)\\ - G h & Make the Gnus {\bf help} (documentation) group. (nndoc)\\ - G k & Make a {\bf kiboze} group. (nnkiboze)\\ - G m & {\bf Make} a new group.\\ - G p & Edit this group's {\bf parameters}.\\ - G r & Rename this group (does not work with read-only groups!).\\ - G u & Create one of the groups mentioned in gnus-{\bf useful}-groups.\\ - G v & Add this group to a {\bf virtual} group. [p/p]\\ - G V & Make a new empty {\bf virtual} group. (nnvirtual)\\ - G w & Create ephemeral group based on web-search. [Prefix: make solid group - instead]\\ - G R & Make an {\bf RSS} group.\\ - G DEL & {\bf Delete} group [Prefix: delete all articles as well].\\ - G x & Expunge all deleted articles in an nnimap mailbox.\\ - G l & Edit ACL (Access Control {\bf List}) for an nnimap mailbox.\\ - \end{keys} - You can also create mail-groups and read your mail with Gnus (very useful - if you are subscribed to mailing lists), using one of the methods - nnmbox, nnbabyl, nnml, nnmh, or nnfolder. Read about it in the online info - (C-c C-i g Reading Mail RET). - }} - - % TODO: - \newcommand{\SoupCommands}{% - \begin{keys}{G s w} - G s b & gnus-group-brew-soup: not documented.\\ - G s p & gnus-soup-pack-packet: not documented.\\ - G s r & nnsoup-pack-replies: not documented.\\ - G s s & gnus-soup-send-replies: not documented.\\ - G s w & gnus-soup-save-areas: not documented.\\ - \end{keys}} - - \newcommand{\MarkGroups}{% - \begin{keys}{M m} - M m & (\#) Set the process {\bf mark} on this group. [scope]\\ - M r & Mark all groups matching regular expression.\\ - M u & (M-\#) Remove the process mark from this group ({\bf unmark}). - [scope]\\ - M U & Remove the process mark from all groups (\textbf{umark all}).\\ - M w & Mark all groups in the current region. [prefix: unmark]\\ - M b & Mark all groups in the {\bf buffer}. [prefix: unmark]\\ - \end{keys}} - - \newcommand{\GroupTopicsGeneral}{% - {\esamepage - Topics are ``categories'' for groups. Press t in the group-buffer to - toggle gnus-topic-mode (C-c C-i g Group Topics RET).\\* - \begin{keys}{C-c C-x} - T n & Prompt for topic {\bf name} and create it.\\ - T m & {\bf Move} the current group to some other topic [p/p].\\ - T j & {\bf Jump} to a topic.\\ - T c & {\bf Copy} the current group to some other topic [p/p].\\ - T D & Remove (not delete) the current group [p/p].\\ - T M & {\bf Move} all groups matching a regexp to a topic.\\ - T C & {\bf Copy} all groups matching a regexp to a topic.\\ - T H & Toggle {\bf hiding} of empty topics.\\ - T r & {\bf Rename} a topic.\\ - T DEL & Delete an empty topic.\\ - T \# & Mark all groups in the current topic with the process-mark.\\ - T M-\# & Remove the process-mark from all groups in the current topic.\\ - T TAB & (TAB) Indent current topic [Prefix: unindent].\\ - M-TAB & Unindent the current topic.\\ - RET & (SPC) Either unfold topic or enter group [level].\\ - T s & {\bf Show} the current topic. [Prefix: show permanently]\\ - T h & {\bf Hide} the current topic. [Prefix: hide permanently]\\ - C-c C-x & Expire all articles in current group or topic.\\ - C-k & {\bf Kill} a group or topic.\\ - C-y & {\bf Yank} a group or topic.\\ - A T & List active-file using {\bf topics}.\\ - G p & Edit topic-{\bf parameters}.\\ - T M-n & Go to {\bf next} topic. [distance]\\ - T M-p & Go to {\bf previous} topic. [distance]\\ - \end{keys} - } - } - - \newcommand{\TopicSorting}{% - {\esamepage - \begin{keys}{T S m} - T S a & Sort {\bf alphabetically}.\\ - T S u & Sort by number of {\bf unread} articles.\\ - T S l & Sort by group {\bf level}.\\ - T S v & Sort by group score ({\bf value}).\\ - T S r & Sort by group {\bf rank}.\\ - T S m & Sort by {\bf method}.\\ - T S e & Sort by {\bf server} name.\\ - T S s & Sort according to `gnus-group-sort-function'.\\ - \end{keys} - With a prefix these commands will sort in reverse order. - } - } - - \newcommand{\SubscribeKillYankGroups}{% - {\esamepage - \begin{keys}{S C-k} - S k & (C-k) {\bf Kill} this group.\\ - S l & Set the {\bf level} of this group. [p/p]\\ - S s & (U) Prompt for a group and toggle its {\bf subscription}.\\ - S t & (u) {\bf Toggle} subscription to this group. [p/p]\\ - S w & (C-w) Kill all groups in the region.\\ - S y & (C-y) {\bf Yank} the last killed group.\\ - S z & Kill all {\bf zombie} groups.\\ - S C-k & Kill all groups on a certain level.\\ - \end{keys} - } - } - - \newcommand{\SummaryModeGeneral}{% - {\esamepage - \begin{keys}{M-RET} - SPC & (A SPC, A n) Select an article, scroll it one page, move to the - next one.\\ - DEL & (A DEL, A p, b) Scroll this article one page back. [distance]\\ - RET & (A RET) Scroll this article one line forward. [distance]\\ - M-RET & (A M-RET) Scroll this article one line backward. [distance]\\ - = & Expand the Summary window (fullsize). - [Prefix: shrink to display article window]\\ - % - \& & Execute a command on all articles whose header matches a regexp. - [Prefix: move backwards]\\ - M-\& & Execute a command on all articles having the process mark.\\ - % - M-n & (G M-n) Go to the {\bf next} summary line of an unread article. - [distance]\\ - M-p & (G M-p) Go to the {\bf previous} summary line of an unread article. - [distance]\\ - M-s & {\bf Search} through all subsequent articles for a regexp.\\ - M-r & Search through all previous articles for a regexp.\\ - % - A P & {\bf Postscript}-print current buffer.\\ - % - M-k & Edit this group's {\bf kill} file.\\ - M-K & Edit the general {\bf kill} file.\\ - % - C-t & Toggle {\bf truncation} of summary lines.\\ - Y g & Regenerate the summary-buffer.\\ - Y c & Insert all cached articles into the summary-buffer.\\ - % - M-C-e & {\bf Edit} the group-parameters.\\ - M-C-a & Customize the group-parameters.\\ - % - % article handling - % - A $<$ & ($<$, A b) Scroll to the beginning of this article.\\ - A $>$ & ($>$, A e) Scroll to the end of this article.\\ - A s & (s) Perform an i{\bf search} in the article buffer.\\ - % - A D & (C-d) Un{\bf digestify} this article into a separate group. - [Prefix: force digest]\\ - M-C-d & Like C-d, but open several documents in nndoc-groups, wrapped - in an nnvirtual group [p/p]\\ - % - A g & (g) (Re)fetch this article ({\bf get}). [Prefix: get raw version]\\ - A r & (\^{}, A \^{}) Fetch the parent(s) of this article. - [Prefix: if positive fetch \textit{n} ancestors; - negative: fetch only the \textit{n}th ancestor]\\ - A t & {\bf Translate} this article.\\ - A R & Fetch all articles mentioned in the {\bf References}-header.\\ - A T & Fetch full \textbf{thread} in which the current article appears.\\ - M-\^{} & Fetch the article with a given Message-ID.\\ - S y & {\bf Yank} the current article into an existing message-buffer. - [p/p]\\ - A M & Setup group parameters for {\bf mailing} lists from - headers. [Prefix: replace old settings]\\ - \end{keys} - } - } - - \newcommand{\MIMESummary}{% - {\esamepage - For the commands operating on one MIME part (a subset of gnus-article-*), a - prefix selects which part to operate on. If the point is placed over a - MIME button in the article buffer, use the corresponding bindings for the - article buffer instead. - - \begin{keys}{W M w} - K v & (b, W M b) {\bf View} the MIME-part.\\ - K o & {\bf Save} the MIME part.\\ - K c & {\bf Copy} the MIME part.\\ - K e & View the MIME part {\bf externally}.\\ - K i & View the MIME part {\bf internally}.\\ - K $\mid$ & Pipe the MIME part to an external command.\\ - K b & Make all the MIME parts have buttons in front of them.\\ - K m & Try to repair {\bf multipart-headers}.\\ - K C & View the MIME part using a different {\bf charset}.\\ - X m & Save all parts matching a MIME type to a directory. [p/p]\\ - M-t & Toggle the buttonized display of the article buffer.\\ - W M w & Decode RFC2047-encoded words in the article headers.\\ - W M c & Decode encoded article bodies. [Prefix: prompt for charset]\\ - W M v & View all MIME parts in the current article.\\ - \end{keys} - } - } - - \newcommand{\SortSummary}{% - {\esamepage - \begin{keys}{C-c C-s C-a} - C-c C-s C-a & Sort the summary-buffer by {\bf author}.\\ - % C-c C-s C-t & Sort the summary-buffer by {\bf recipient}.\\ % No Gnus - C-c C-s C-d & Sort the summary-buffer by {\bf date}.\\ - C-c C-s C-i & Sort the summary-buffer by article score.\\ - C-c C-s C-l & Sort the summary-buffer by amount of {\bf lines}.\\ - C-c C-s C-c & Sort the summary-buffer by length.\\ - C-c C-s C-n & Sort the summary-buffer by article {\bf number}.\\ - C-c C-s C-s & Sort the summary-buffer by {\bf subject}.\\ - C-c C-s C-r & Sort the summary-buffer {\bf randomly}.\\ - C-c C-s C-o & Sort the summary-buffer using the default method.\\ - \end{keys} - With a prefix these functions sort in reverse order. - } - } - - \newcommand{\MailGroups}{% formerly \Bsubmap - {\esamepage - These commands (except `B c') are only valid in a mail group.\\* - \begin{keys}{B M-C-e} - B DEL & (B backspace, B delete) {\bf Delete} the mail article from disk (!). - [p/p]\\ - B B & Crosspost this article to another group.\\ - B c & {\bf Copy} this article from any group to a mail group. [p/p]\\ - B e & {\bf Expire} all expirable articles in this group. [p/p]\\ - B i & {\bf Import} a random file into this group.\\ - B I & Create an empty article in this group.\\ - B m & {\bf Move} the article from one mail group to another. [p/p]\\ - B p & Query whether the article was {\bf posted} as well.\\ - B q & {\bf Query} where the article will end up after fancy splitting\\ - B r & {\bf Respool} this mail article. [p/p]\\ - B t & {\bf Trace} the fancy splitting patterns applied to this article.\\ - B w & (e) Edit this article.\\ - B M-C-e & {\bf Expunge} (delete from disk) all expirable articles in this group - (!). [p/p]\\ - K E & {\bf Encrypt} article body. [p/p]\\ - \end{keys} - } - } - - \newcommand{\DraftGroup}{% formerly \Dsubmap - {\esamepage - The ``drafts''-group contains messages that have been saved but not sent - and rejected articles. \\* - \begin{keys}{B DEL} - D e & \textbf{edit} message.\\ - D s & \textbf{Send} message. [p/p]\\ - D S & \textbf{Send} all messages.\\ - D t & \textbf{Toggle} sending (mark as unsendable).\\ - B DEL & \textbf{Delete} message (like in mailgroup).\\ - \end{keys} - } - } - - \newcommand{\SelectArticles}{% formerly \Gsubmap - {\esamepage - These commands select the target article. They do not understand the prefix.\\* - \begin{keys}{G C-n} - h & Enter article-buffer.\\ - G b & (,) Go to the {\bf best} article (the one with highest score).\\ - G f & (.) Go to the {\bf first} unread article.\\ - G n & (n) Go to the {\bf next} unread article.\\ - G p & (p) Go to the {\bf previous} unread article.\\ - % - G N & (N) Go to {\bf the} next article.\\ - G P & (P) Go to the {\bf previous} article.\\ - % - G C-n & (M-C-n) Go to the {\bf next} article with the same subject.\\ - G C-p & (M-C-p) Go to the {\bf previous} article with the same subject.\\ - % - G l & (l) Go to the previously read article ({\bf last-read-article}).\\ - G o & Pop an article off the summary history and go to it.\\ - % - G g & Search an article via subject.\\ - G j & (j) Search an article via Message-Id or subject.\\ - \end{keys} - } - } - - \newcommand{\ArticleModeGeneral}{% - {\esamepage - The normal navigation keys work in Article mode. Some additional keys are:\\ - \begin{keys}{C-c RET} - C-c \^{} & Get the article with the Message-ID near point.\\ - C-c RET & Send reply to address near point.\\ - h & Go to the \textbf{header}-line of the article in the - summary-buffer.\\ - s & Go to \textbf{summary}-buffer.\\ - RET & (middle mouse button) Activate the button at point to follow - an URL or Message-ID.\\ - TAB & Move the point to the next button.\\ - M-TAB & Move point to previous button.\\ - \end{keys} - } - } - - \newcommand{\WashArticle}{% formerly \Wsubmap - {\esamepage - \begin{keys}{W W H} - W 6 & Translate a base64 article.\\ - W a & Strip certain {\bf headers} from body.\\ - W b & Make Message-IDs and URLs in the article mouse-clickable - {\bf buttons}.\\ - W c & Translate CRLF-pairs to LF and then the remaining CR's to LF's.\\ - W d & Treat {\bf dumbquotes}.\\ - W e & Treat {\bf emphasized} text.\\ - W h & Treat {\bf HTML}.\\ - W l & (w) Remove page breaks ({\bf\^{}L}) from the article.\\ - W m & {\bf Morse} decode article.\\ - W o & Treat {\bf overstrike} or underline (\^{}H\_) in the article.\\ - W p & Verify X-{\bf PGP}-Sig header.\\ - W q & Treat {\bf quoted}-printable in the article.\\ - W r & (C-c C-r) Do a Caesar {\bf rotate} (rot13) on the article.\\ - W s & Verify (and decrypt) a {\bf signed} message.\\ - W t & (t) {\bf Toggle} display of all headers.\\ - W u & {\bf Unsplit} broken URLs.\\ - W v & (v) Toggle permanent {\bf verbose} displaying of all headers.\\ - W w & Do word {\bf wrap} in the article.\\ - W B & Add clickable {\bf buttons} to the article headers.\\ - W C & {\bf Capitalize} first word in each sentence.\\ - W Q & Fill long lines.\\ - W Z & Translate a HZ-encoded article.\\ - % - W G u & {\bf Unfold} folded header lines.\\ - W G f & {\bf Fold} all header lines.\\ - W G n & Unfold {\bf Newsgroups:} and Follow-Up-To:.\\ - % - W Y c & Repair broken {\bf citations}.\\ - W Y a & Repair broken {\bf attribution} lines.\\ - W Y u & {\bf Unwrap} broken citation lines.\\ - W Y f & Do a {\bf full} deuglification (W Y c, W Y a, W Y u).\\ - \end{keys} - } - } - - \newcommand{\BlankAndWhitespace}{% - {\esamepage - \begin{keys}{W E w} - W E l & Strip blank {\bf lines} from the beginning of the article.\\ - W E m & Replace blank lines with empty lines and remove {\bf multiple} - blank lines.\\ - W E t & Remove {\bf trailing} blank lines.\\ - W E a & Strip blank lines at the beginning and the end - (W E l, W E m and W E t).\\ - W E A & Strip {\bf all} blank lines.\\ - W E s & Strip leading blank lines from the article body.\\ - W E e & Strip trailing blank lines from the article body.\\ - W E w & Remove leading {\bf whitespace} from all headers.\\ - \end{keys} - } - } - - \newcommand{\Picons}{% - {\esamepage - \begin{keys}{W D D} - W D s & (W g) Display {\bf smilies}.\\ - W D x & (W f) Look for and display any X-{\bf Face} headers.\\ - W D d & Display any Face headers.\\ - W D n & Toggle picons in {\bf Newsgroups} and Followup-To.\\ - W D m & Toggle picons in {\bf mail} headers (To and Cc).\\ - W D f & Toggle picons in {\bf From}.\\ - W D D & Remove all images from the article buffer.\\ - \end{keys} - } - } - - \newcommand{\TimeAndDate}{% - {\esamepage - \begin{keys}{W T u} - W T u & (W T z) Display the article timestamp in GMT ({\bf UT, ZULU}).\\ - W T i & Display the article timestamp in {\bf ISO} 8601.\\ - W T l & Display the article timestamp in the {\bf local} timezone.\\ - W T s & Display according to `gnus-article-time-format'.\\ - W T e & Display the time {\bf elapsed} since it was sent.\\ - W T o & Display the {\bf original} timestamp.\\ - W T p & Display the date in format that's {\bf - pronounceable} in English.\\ - \end{keys} - } - } - - \newcommand{\HideHighlightArticle}{% - {\esamepage - \begin{keys}{W W C-c} - W W a & Hide {\bf all} unwanted parts. Calls W W h, W W s, W W C-c.\\ - W W h & Hide article {\bf headers}.\\ - W W b & Hide {\bf boring} headers.\\ - W W s & Hide {\bf signature}.\\ - W W l & Hide {\bf list} identifiers in subject-header.\\ - W W P & Hide {\bf PEM} (privacy enhanced messages).\\ - W W B & Hide banner specified by group parameter.\\ - W W c & Hide {\bf citation}.\\ - W W C-c & Hide {\bf citation} using a more intelligent algorithm.\\ - W W C & Hide cited text in articles that aren't roots.\\ - W H a & Highlight {\bf all} parts. Calls W b, W H c, W H h, W H s.\\ - W H c & Highlight article {\bf citations}.\\ - W H h & Highlight article {\bf headers}.\\ - W H s & Highlight article {\bf signature}.\\ - \end{keys} - For all hiding-commands: A positive prefix always hides, and a negative - prefix will show what was previously hidden. - }} - - \newcommand{\MIMEArticleMode}{% - {\esamepage - \begin{keys}{RET} - RET & (BUTTON-2) Toggle display of the MIME object.\\ - v & Prompt for a method and then view object using this method.\\ - o & Prompt for a filename and save the MIME object.\\ - C-o & Prompt for a filename to save the MIME object to and remove it.\\ - d & {\bf Delete} the MIME object.\\ - c & {\bf Copy} the MIME object to a new buffer and display this buffer.\\ - i & Display the MIME object in this buffer.\\ - C & Copy the MIME object to a new buffer and display this buffer using {\bf Charset} \\ - E & View internally. \\ - e & View {\bf externally}. \\ - t & View the MIME object as a different {\bf type}.\\ - p & {\bf Print} the MIME object.\\ - $\mid$ & Pipe the MIME object to a process.\\ - . & Take action on the MIME object.\\ - \end{keys} - } - } - - %% end of article mode for reading .......................................... - - \newcommand{\MarkArticlesGeneral}{% formerly \Msubmap - {\esamepage - \begin{keys}{M M-C-r} - d & (M d, M r) Mark this article as read and move to the next one. - [scope]\\ - D & Mark this article as read and move to the previous one. [scope]\\ - ! & (u, M !, M t) Tick this article (mark it as interesting) and move - to the next one. [scope]\\ - U & Tick this article and move to the previous one. [scope]\\ - M ? & (?) Mark this article as dormant (only followups are - interesting). [scope]\\ - M D & Show all {\bf dormant} articles (normally they are hidden unless they - have any followups).\\ - M M-D & Hide all {\bf dormant} articles.\\ - C-w & Mark all articles between point and mark as read.\\ - M-u & (M SPC, M c) Clear all marks from this article and move to the next - one. [scope]\\ - M-U & Clear all marks from this article and move to the previous one. - [scope]\\ - % - M e & (E, M x) Mark this article as {\bf expirable}. [scope]\\ - % - M k & (k) {\bf Kill} all articles with the same subject then select the - next unread one.\\ - M K & (C-k) {\bf Kill} all articles with the same subject as this one.\\ - % - M C & {\bf Catch-up} the articles that are not ticked and not dormant.\\ - M C-c & {\bf Catch-up} all articles in this group.\\ - M H & {\bf Catch-up} (mark read) this group to point (to-{\bf here}).\\ - % - M b & Set a {\bf bookmark} in this article.\\ - M B & Remove the {\bf bookmark} from this article.\\ - % - M M-r & (x) Expunge all {\bf read} articles from this group.\\ - M M-C-r & Expunge all articles having a given mark.\\ - M S & (C-c M-C-s) {\bf Show} all expunged articles.\\ - M M C-h & Displays some more keys doing ticking slightly differently.\\ - \end{keys} - The variable `gnus-summary-goto-unread' controls what happens after a mark - has been set (C-x C-i g Setting Marks RET) - }} - - \newcommand{\MarkByScore}{% - \begin{keys}{M V m} - M V c & {\bf Clear} all marks from all high-scored articles. [score]\\ - M V k & {\bf Kill} all low-scored articles. [score]\\ - M V m & Mark all high-scored articles with a given {\bf mark}. [score]\\ - M V u & Mark all high-scored articles as interesting (tick them). [score]\\ - \end{keys} - } - } - -\newcommand{\ProcessMark}{% - {\esamepage - These commands set and remove the process mark (\#). You only need to use - it if the set of articles you want to operate on is non-contiguous. Else - use a numeric prefix.\\* - \begin{keys}{M P R} - M P p & (\#, M \#) Mark this article.\\ - M P u & (M-\#, M M-\#) \textbf{unmark} this article.\\ - M P b & Mark all articles in {\bf buffer}.\\ - M P r & Mark all articles in the {\bf region}.\\ - M P g & Unmark all articles in the region.\\ - M P R & Mark all articles matching a {\bf regexp}.\\ - M P G & Unmark all articles matching a regexp.\\ - M P t & Mark all articles in this (sub){\bf thread}.\\ - M P T & Unmark all articles in this (sub){\bf thread}.\\ - M P s & Mark all articles in the current {\bf series}.\\ - M P S & Mark all {\bf series} that already contain a marked article.\\ - M P a & Mark {\bf all} articles (in series order).\\ - M P U & \textbf{unmark} all articles.\\ - M P i & {\bf Invert} the list of process-marked articles.\\ - M P k & Push the current process-mark set onto stack and unmark - all articles.\\ - M P y & Pop process-mark set from stack and restore it.\\ - M P w & Push process-mark set on the stack.\\ - M P v & Mark all articles with score over the default score. [Prefix: score]\\ - \end{keys} - } - } - -\newcommand{\Limiting}{% - {\esamepage - \begin{keys}{/M} - // & (/s) Limit the summary-buffer to articles matching {\bf subject}.\\ - /a & Limit the summary-buffer to articles matching {\bf author}.\\ - /x & Limit depending on ``extra'' headers.\\ - /u & (x) Limit to {\bf unread} articles. - [Prefix: also exclude ticked and dormant articles]\\ - /. & Limit to unseen articles.\\ - /m & Limit to articles marked with specified {\bf mark}.\\ - /t & Ask for a number and exclude articles younger than that many days. - [Prefix: exclude older articles]\\ - /n & Limit to current article. [p/p]\\ - /w & Pop the previous limit off the stack and restore it. - [Prefix: pop all limits]\\ - /v & Limit to score. [score]\\ - /E & (M S) Include all expunged articles in the limit.\\ - /D & Include all dormant articles in the limit.\\ - /* & Limit to cached articles.\\ - Y C & Include all cached articles in the limit.\\ - /d & Exclude all dormant articles from the limit.\\ - /M & Exclude all marked articles.\\ - /T & Include all articles from the current thread in the limit.\\ - /c & Exclude all dormant articles that have no children from the limit.\\ - /C & Mark all excluded unread articles as read. - [Prefix: also mark ticked and dormant articles]\\ - /o & Insert all {\bf old} articles. [Prefix: how many]\\ - /N & Insert all {\bf new} articles.\\ - /p & Limit to articles {\bf predicated} in the `display' group parameter.\\ - % /r & Limit to {\bf replied} articles. [Prefix: unreplied]\\ % No Gnus - \end{keys} - } - } - -\newcommand{\OutputArticles}{% formerly \Osubmap - {\esamepage - \begin{keys}{O m} - O o & (o, C-o) Save this article using the default article saver. [p/p]\\ - O b & Save this article's {\bf body} in plain file format [p/p]\\ - O f & Save this article in plain {\bf file} format. [p/p]\\ - O F & like O f, but overwrite file's contents. [p/p]\\ - O h & Save this article in {\bf mh} folder format. [p/p]\\ - O m & Save this article in {\bf mail} format. [p/p]\\ - O r & Save this article in {\bf rmail} format. [p/p]\\ - O v & Save this article in {\bf vm} format. [p/p]\\ - O p & ($\mid$) {\bf Pipe} this article to a shell command. [p/p]\\ - O P & \textbf{Print} this article using Muttprint. [p/p]\\ - \end{keys} - } - } - -\newcommand{\PostReplyetc}{% formerly \Ssubmap - {\esamepage - These commands put you in a separate news or mail buffer. See the section - about composing messages for more information.\\* - %After - %editing the article, send it by pressing C-c C-c. If you are in a - %foreign group and want to post the article using the foreign server, give - %a prefix to C-c C-c.\\* - \begin{keys}{S O m} - S p & (a) {\bf Post} an article to this group.\\ - S f & (f) Post a {\bf followup} to this article.\\ - S F & (F) Post a {\bf followup} and include the original. [p/p]\\ - S o p & Forward this article as a {\bf post} to a newsgroup.\\ - S M-c & Send a complaint about excessive crossposting to the author of this - article. [p/p]\\ - % - S m & (m) Send a {\bf mail} to some other person.\\ - S r & (r) Mail a {\bf reply} to the author of this article.\\ - S R & (R) Mail a {\bf reply} and include the original. [p/p]\\ - S B r & Like S r but ignore the Reply-To: header.\\ - S B R & Like S R but ignore the Reply-To: header.\\ - S w & Mail a {\bf wide} reply to this article.\\ - S W & Mail a {\bf wide} reply to this article and include - the original.\\ - S v & Mail a {\bf very} wide reply to this article.\\ - S V & Mail a {\bf very} wide reply to this article and include the original.\\ - S o m & (C-c C-f) Forward this article by {\bf mail} to a person.\\ - S D b & Resend {\bf bounced} mail.\\ - S D r & {\bf Resend} mail to a different person.\\ - S D e & {\bf Edit} and resend.\\ - % - S n & Post a followup via {\bf news} even if you got the message - through mail.\\ - S N & Post a followup via {\bf news} and include the original mail. - [p/p]\\ - % - S c & (C) {\bf Cancel} this article (only works if it is - your own). [p/p]\\ - S s & {\bf Supersede} this article with a new one (only for own - articles).\\ - % - S O m & Digest these series and forward by {\bf mail}. [p/p]\\ - S O p & Digest these series and forward as a {\bf post} to a newsgroup. - [p/p]\\ - % - S u & {\bf Uuencode} a file and post it as a series.\\ - \end{keys} - If you want to cancel or supersede an article you just posted (before it - has appeared on the server), go to the *post-news* buffer, change - `Message-ID' to `Cancel' or `Supersedes' and send it again with C-c C-c. - }} - -\newcommand{\Threading}{% formerly \Tsubmap - {\esamepage - \begin{keys}{T M-\#} - T \# & Mark this thread with the process mark.\\ - T M-\# & Remove process-marks from this thread.\\ - % - T t & Re-{\bf thread} the current article's thread.\\ - T \^{} & Make the current article child of the marked (or previous) article.\\ - % movement - T n & (M-C-f, M-down) Go to the {\bf next} thread. [distance]\\ - T p & (M-C-b, M-up) Go to the {\bf previous} thread. [distance]\\ - T d & {\bf Descend} this thread. [distance]\\ - T u & Ascend this thread ({\bf up}-thread). [distance]\\ - T o & Go to the top of this thread.\\ - % - T s & {\bf Show} the thread hidden under this article.\\ - T h & {\bf Hide} this (sub)thread.\\ - % - T i & {\bf Increase} the score of this thread.\\ - T l & (M-C-l) {\bf Lower} the score of this thread.\\ - % - T k & (M-C-k) {\bf Kill} the current (sub)thread. [Negative prefix: - tick it, positive prefix: unmark it.]\\ - % - T H & {\bf Hide} all threads.\\ - T S & {\bf Show} all hidden threads.\\ - T T & (M-C-t) {\bf Toggle} threading.\\ - \end{keys} - } - } - -\newcommand{\Scoring}{% formerly \Vsubmap - {\esamepage - Read about Adaptive Scoring in the online info.\\* - \begin{keys}{\bf A p m l} - V a & {\bf Add} a new score entry, specifying all elements.\\ - V c & Specify a new score file as {\bf current}.\\ - V e & {\bf Edit} the current score alist.\\ - V f & Edit a score {\bf file} and make it the current one.\\ - V m & {\bf Mark} all articles below a given score as read.\\ - V s & Set the {\bf score} of this article.\\ - V t & Display all score rules applied to this article ({\bf track}).\\ - W w & List {\bf words} used in scoring.\\ - V x & {\bf Expunge} all low-scored articles. [score]\\ - V C & {\bf Customize} the current score file through a user-friendly - interface.\\ - V F & {\bf Flush} the cache of score files.\\ - V R & {\bf Re-score} the summary buffer.\\ - V S & Display the {\bf score} of this article.\\ - \bf A p m l& Make a scoring entry based on this article.\\ - \end{keys} - The four letters stand for:\\* - \quad \B{A}ction: I)ncrease, L)ower;\\* - \quad \B{p}art: a)uthor (from), s)ubject, x)refs (cross-posting), d)ate, l)ines, - message-i)d, t)references (parent), f)ollowup, b)ody, h)ead (all headers);\\* - \quad \B{m}atch type:\\* - \qquad string: s)ubstring, e)xact, r)egexp, f)uzzy,\\* - \qquad date: b)efore, a)t, n)this,\\* - \qquad number: $<$, =, $>$;\\* - \quad \B{l}ifetime: t)emporary, p)ermanent, i)mmediate. - - If you type the second letter in uppercase, the remaining two are assumed - to be s)ubstring and t)emporary. - If you type the third letter in uppercase, the last one is assumed to be - t)emporary. - - \quad Extra keys for manual editing of a score file:\\* - \begin{keys}{C-c C-c} - C-c C-c & Finish editing the score file.\\ - C-c C-d & Insert the current {\bf date} as number of days.\\ - \end{keys} - } - } - -\newcommand{\ExtractSeries}{% formerly \Xsubmap - {\esamepage - Gnus recognizes if the current article is part of a series (multipart - posting whose parts are identified by numbers in their subjects, e.g.{} - 1/10\dots10/10) and processes the series accordingly. You can mark and - process more than one series at a time. If the posting contains any - archives, they are expanded and gathered in a new group.\\* - \begin{keys}{X p} - X b & Un-{\bf binhex} these series. [p/p]\\ - X o & Simply {\bf output} these series (no decoding). [p/p]\\ - X p & Unpack these {\bf postscript} series. [p/p]\\ - X s & Un-{\bf shar} these series. [p/p]\\ - X u & {\bf Uudecode} these series. [p/p]\\ - \end{keys} - - Each one of these commands has four variants:\\* - \begin{keys}{X v \bf Z} - X \bf z & Decode these series. [p/p]\\ - X \bf Z & Decode and save these series. [p/p]\\ - X v \bf z & Decode and view these series. [p/p]\\ - X v \bf Z & Decode, save and view these series. [p/p]\\ - \end{keys} - where {\bf z} or {\bf Z} identifies the decoding method (b, o, p, s, u). - - An alternative binding for the most-often used of these commands is\\* - \begin{keys}{C-c C-v C-v} - C-c C-v C-v & (X v u) Uudecode and view these series. [p/p]\\ - \end{keys} - }} - -\newcommand{\ExitSummary}{% formerly \Zsubmap - {\esamepage - \begin{keys}{Z G} - Z Z & (q, Z Q) Exit this group.\\ - Z E & (Q) {\bf Exit} without updating the group information.\\ - % - Z c & (c) Mark all unticked articles as read ({\bf catch-up}) and exit.\\ - Z C & Mark all articles as read ({\bf catch-up}) and exit.\\ - % - Z n & Mark all articles as read and go to the {\bf next} group.\\ - Z N & Exit and go to {\bf the} next group.\\ - Z P & Exit and go to the {\bf previous} group.\\ - % - Z G & (M-g) Check for new articles in this group ({\bf get}).\\ - Z R & (C-x C-s) Exit this group, and then enter it again ({\bf reenter}). - [Prefix: select all articles, read and unread.]\\ - Z s & Update and save the dribble buffer. [Prefix: save .newsrc* as well]\\ - \end{keys} - } - } - -\newcommand{\MsgCompositionGeneral}{% - Press C-c ? in the composition-buffer to get this information.\\* - {\esamepage - \begin{keys}{C-c C-m} - % sending - C-c C-c & Send message and exit. [Prefix: send via foreign server]\\ - C-c C-s & Send message. [Prefix: send via foreign server]\\ - C-c C-d & Don't send message (save as \textbf{draft}).\\ - C-c C-k & \textbf{Kill} message-buffer.\\ - C-c C-m & {\bf Mail} reply to the address near point. - [Prefix: include the original]\\ - % modify headers/body - C-c C-o & Sort headers.\\ - C-c C-e & \textbf{Elide} region.\\ - C-c C-v & Kill everything outside region.\\ - C-c C-r & Do a \textbf{Rot-13} on the body.\\ - C-c C-w & Insert signature (from `message-signature-file').\\ - C-c C-z & Kill everything up to signature.\\ - C-c C-y & \textbf{Yank} original message.\\ - C-c C-q & Fill the yanked message.\\ - C-c M-C-y & \textbf{Yank} a buffer and quote it.\\ - M-RET & Insert four newlines and format quoted text. [Prefix: - justify as well]\\ - C-c M-r & \textbf{Rename} message buffer. [Prefix: ask for new name]\\ - \end{keys} - } - } - -\newcommand{\MsgCompositionMovementArticle}{% - The following functions create the header-field if necessary.\\* - {\esamepage - \begin{keys}{C-c C-f C-u} - C-c TAB & Move to \textbf{signature}.\\ - C-c C-b & Move to \textbf{body}.\\ - C-c C-f C-t & (C-c C-t) Move to \textbf{To:}.\\ - C-c C-f C-c & Move to \textbf{Cc:}.\\ - C-c C-f C-b & Move to \textbf{Bcc:}.\\ - C-c C-f C-w & Move to \textbf{Fcc:}.\\ - C-c C-f C-s & Move to \textbf{Subject:}.\\ - C-c C-f C-r & Move to \textbf{Reply-To:}.\\ - C-c C-f C-f & Move to \textbf{Followup-To:}.\\ - C-c C-f C-n & (C-c C-n) Move to \textbf{Newsgroups:}.\\ - C-c C-f C-u & Move to \textbf{Summary:}.\\ - C-c C-f C-k & Move to \textbf{Keywords:}.\\ - C-c C-f C-d & Move to \textbf{Distribution:}.\\ - C-c C-f C-m & Move to \textbf{Mail-Followup-To:}.\\ - C-c C-f C-o & Move to \textbf{From:}.\\ - C-c C-f C-a & Insert a reasonable \textbf{Mail-Followup-To:} for - an unsubscribed list. [Prefix: include addresses in \textbf{Cc:}]\\ - C-c C-f TAB & (C-c C-u) Move to \textbf{Importance:}.\\ - C-c M-n & Insert \textbf{Disposition-Notification-To:} - (request receipt).\\ - \end{keys} - } - } - -\newcommand{\MsgCompositionMML}{% - {\esamepage - \begin{keys}{C-c C-m P} - C-c C-m f & (C-c C-a) Attach \textbf{file}.\\ - C-c C-m b & Attach contents of \textbf{buffer}.\\ - C-c C-m e & Attach \textbf{external} file (ftp..).\\ - C-c C-m P & Create MIME-\textbf{preview} (new - buffer). [Prefix: show raw MIME preview]\\ - C-c C-m v & \textbf{Validate} article.\\ - C-c C-m p & Insert \textbf{part}.\\ - C-c C-m m & Insert \textbf{multi}-part.\\ - C-c C-m q & \textbf{Quote} region.\\ - C-c C-m c s & Encrypt message using \textbf{S/MIME}.\\ - C-c C-m c o & Encrypt message using PGP.\\ - C-c C-m c p & Encrypt message using \textbf{PGP/MIME}.\\ - C-c C-m s s & Sign message using \textbf{S/MIME}.\\ - C-c C-m s o & Sign message using PGP.\\ - C-c C-m s p & Sign message using \textbf{PGP/MIME}.\\ - C-c C-m C-n & Remove security related MML tags from message.\\ - % TODO: narrow headers (C-c C-m n) ? - \end{keys} - } - } - -%% TODO: -\newcommand{\ServerMode}{% - {\esamepage - To enter this mode, press \^{} while in Group mode.\\* - \begin{keys}{SPC} - SPC & (RET) Browse this server.\\ - a & {\bf Add} a new server.\\ - c & {\bf Copy} this server.\\ - e & {\bf Edit} a server.\\ - k & {\bf Kill} this server. [scope]\\ - l & {\bf List} all servers.\\ - q & Return to the group buffer ({\bf quit}).\\ - s & Request that the server scan its sources for new articles.\\ - g & Request that the server regenerate its data.\\ - y & {\bf Yank} the previously killed server.\\ - O & Try to {\bf open} a connection to this server.\\ - C & {\bf Close} connection to this server.\\ - D & Mark this server as unreachable ({\bf deny}).\\ - M-o & {\bf Open} the connection to all servers.\\ - M-c & {\bf Close} the connection to all servers.\\ - R & Make all denied servers into closed servers.\\ - L & Set server status to offline.\\ - \end{keys} - } - } - -\newcommand{\BrowseServer}{% - {\esamepage - To enter this mode, press `B' while in Group mode.\\* - \begin{keys}{RET} - RET & Enter the current group.\\ - SPC & Enter the current group and display the first article.\\ - ? & Give a very short help message.\\ - n & Go to the {\bf next} group. [distance]\\ - p & Go to the {\bf previous} group. [distance]\\ - q & (l) {\bf Quit} browse mode.\\ - u & Subscribe to the current group. [scope]\\ - \end{keys} - } - } - -\newcommand{\GroupUnplugged}{% - {\esamepage - \begin{keys}{J S} - J j & Toggle plugged-state.\\ - J s & Fetch articles from all groups for offline-reading.\\ - J u & Fetch all eligible articles from this group.\\ - J S & \textbf{Send} all sendable messages in the drafts group.\\ - % - J c & Enter \textbf{category} buffer.\\ - J a & \textbf{Add} this group to an Agent category [p/p].\\ - J r & \textbf{Remove} this group from its Agent category [p/p].\\ - J Y & Synchronize flags changed while unplugged with remote server.\\ - \end{keys} - } - } - -\newcommand{\SummaryUnplugged}{% - {\esamepage - \begin{keys}{J M-\#} - J \# & \textbf{Mark} the article for downloading.\\ - J M-\# & \textbf{Unmark} the article for downloading.\\ - @ & \textbf{Toggle} whether to download the article.\\ - J c & Mark all undownloaded articles as read (\textbf{catch-up}).\\ - J u & Download all downloadable articles from group.\\ - \end{keys} - } - } - -\newcommand{\ServerUnplugged}{% - {\esamepage - \begin{keys}{J a} - J a & \textbf{Add} the current server to the list of servers covered - by the agent.\\ - J r & \textbf{Remove} the current server from the list of servers covered - by the agent.\\ - \end{keys} - } - } - -% end {gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % % - - -% o some things might not be updated: scoring and server modes, maybe more -% o Gnus Unplugged category-buffer commands need to be written - -\begin{document} - -\ifthenelse{\isundefined{\booklettrue}}{ % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - \raggedbottom\raggedright - \twocolumn - % use \tiny to shrink it to 4 pages (needs a high-resolution printer though) - % \tiny - \scriptsize - \pagestyle{plain} - \Title - \par - \Logo{refcard} -}{ - \setcounter{page}{0} - \thispagestyle{empty} - \vspace*{\fill} - \Title - \vspace{0.4in} - \Logo{booklet} - \vspace*{\fill} - \pagebreak -}%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -% TODO: how does this work ? -%\tableofcontents - -\Notes -% - -\section*{Group-Mode} -\GroupModeGeneral - \subsection*{Group Subscribedness-Levels} - \GroupLevels - \subsection*{List Groups} - \ListGroups - \subsection*{Create/Edit Foreign Groups} - \CreateEditGroups - \subsection*{Unsubscribe, Kill and Yank Groups} - \SubscribeKillYankGroups - \subsection*{Mark Groups} - \MarkGroups - \subsection*{Group-Unplugged} - \GroupUnplugged -% topics in group-mode - \subsection*{Group Topics} - \GroupTopicsGeneral - \subsubsection*{Topic Sorting} - \TopicSorting - -% \ifthenelse{\isundefined{\booklettrue}}{}{\pagebreak} - -% summary-mode -\section*{Summary Mode} -\SummaryModeGeneral - \subsection*{Select Articles} - \SelectArticles -% - \subsection*{Threading} - \Threading -% - \subsection*{Limiting} - \Limiting - \subsection*{Sort the Summary-Buffer} - \SortSummary - \subsection*{Score (Value) Commands} - \Scoring - -\ifthenelse{\isundefined{\booklettrue}}{% ifcard %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - \subsection*{Output Articles} - \OutputArticles - \subsection*{Extract Series (Uudecode etc)} - \ExtractSeries -}{}%ifcard% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - - \subsection*{MIME operations from the Summary-Buffer} - \MIMESummary - -\ifthenelse{\isundefined{\booklettrue}}{}{% ifbooklet %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - \subsection*{Extract Series (Uudecode etc)} - \ExtractSeries - \subsection*{Output Articles} - \OutputArticles -}%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -% - \subsection*{Post, Followup, Reply, Forward, Cancel} - \PostReplyetc - -\ifthenelse{\isundefined{\booklettrue}}{\newpage}{}% newpage ifcard - - \subsection*{Message Composition} - - \MsgCompositionGeneral - \subsubsection*{Jumping in message-buffer} - \MsgCompositionMovementArticle - \subsubsection*{Attachments/MML} - \MsgCompositionMML -% marking articles - \subsection*{Mark Articles} - \MarkArticlesGeneral - \subsubsection*{Mark Based on Score} - \MarkByScore - \subsubsection*{The Process Mark} - \ProcessMark - \subsubsection*{Mark Indication-Characters} - \MarkCharacters -% -\ifthenelse{\isundefined{\booklettrue}}{\newpage}{}% - - \subsection*{Summary-Unplugged} - \SummaryUnplugged - \subsection*{Mail-Group Commands} - \MailGroups - \subsection*{Draft-Group Commands} - \DraftGroup -% exiting - \subsection*{Exit the Summary-Buffer} - \ExitSummary -% -% -\section*{Article Mode (reading)} -\ArticleModeGeneral - \subsection*{Wash the Article-Buffer} - \WashArticle - \subsubsection*{Blank Lines and Whitespace} - \BlankAndWhitespace - \subsubsection*{Picons, X-faces, Smileys} - \Picons - \subsubsection*{Time and Date} - \TimeAndDate - \subsection*{Hide/Highlight Parts of the Article} - \HideHighlightArticle - \subsection*{MIME operations from the Article-Buffer (reading)} - \MIMEArticleMode -% -% -\section*{Server Mode} -\ServerMode - \subsection*{Unplugged-Server} - \ServerUnplugged -% -% -\section*{Browse Server Mode} -\BrowseServer - -%\pagebreak -\vspace*{\fill} -\Copyright - -\end{document} - -%%% Local Variables: -%%% mode: latex -%%% TeX-master: t -%%% End: - -% arch-tag: be438b0e-6832-4afb-8c56-5f84743e5cd1