changeset 82632:73d0619402c5

Move refcards from etc/ to etc/refcards/
author Glenn Morris <rgm@gnu.org>
date Wed, 22 Aug 2007 07:18:49 +0000
parents 89ec61c6ba00
children f9b6a5d1a4bd
files etc/refcard.tex
diffstat 1 files changed, 0 insertions(+), 679 deletions(-) [+]
line wrap: on
line diff
--- a/etc/refcard.tex	Wed Aug 22 07:18:43 2007 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,679 +0,0 @@
-% Reference Card for GNU Emacs version 22 on Unix systems
-%**start of header
-\newcount\columnsperpage
-\newcount\letterpaper
-
-% This file can be printed with 1, 2, or 3 columns per page (see below).
-% Specify how many you want here.
-
-\columnsperpage=3
-
-% Set letterpapaer to 0 for A4 paper, 1 for letter (US) paper.  Useful
-% only when columnsperpage is 2 or 3.
-
-\letterpaper=1
-
-% Nothing else needs to be changed below this line.
-% Copyright (C) 1987, 1993, 1996, 1997, 2001, 2002, 2003, 2004,
-%   2005, 2006, 2007  Free Software Foundation, Inc.
-
-% This file is part of GNU Emacs.
-
-% GNU Emacs is free software; you can redistribute it and/or modify
-% it under the terms of the GNU General Public License as published by
-% the Free Software Foundation; either version 3, or (at your option)
-% any later version.
-
-% GNU Emacs is distributed in the hope that it will be useful,
-% but WITHOUT ANY WARRANTY; without even the implied warranty of
-% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-% GNU General Public License for more details.
-
-% You should have received a copy of the GNU General Public License
-% along with GNU Emacs; see the file COPYING.  If not, write to
-% the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-% Boston, MA 02110-1301, USA.
-
-% This file is intended to be processed by plain TeX (TeX82).
-%
-% The final reference card has six columns, three on each side.
-% This file can be used to produce it in any of three ways:
-% 1 column per page
-%    produces six separate pages, each of which needs to be reduced to 80%.
-%    This gives the best resolution.
-% 2 columns per page
-%    produces three already-reduced pages.
-%    You will still need to cut and paste.
-% 3 columns per page
-%    produces two pages which must be printed sideways to make a
-%    ready-to-use 8.5 x 11 inch reference card.
-%    For this you need a dvi device driver that can print sideways.
-% Which mode to use is controlled by setting \columnsperpage above.
-%
-% To compile and print this document:
-% tex refcard.tex
-% dvips -t landscape refcard.dvi
-%
-% Author:
-%  Stephen Gildea
-%  Internet: gildea@stop.mail-abuse.org
-%
-% Thanks to Paul Rubin, Bob Chassell, Len Tower, and Richard Mlynarik
-% for their many good ideas.
-
-% If there were room, it would be nice to see a section on Dired.
-
-\def\versionnumber{2.3}         % version of this manual
-\def\versionyear{2006}          % year manual was updated
-\def\versionemacs{22}           % version of emacs this manual is for
-\def\year{2007}                 % copyright year
-
-\def\shortcopyrightnotice{\vskip 1ex plus 2 fill
-  \centerline{\small \copyright\ \year\ Free Software Foundation, Inc.
-  Permissions on back.  v\versionnumber}}
-
-\def\copyrightnotice{
-\vskip 1ex plus 2 fill\begingroup\small
-\centerline{Copyright \copyright\ \year\ Free Software Foundation, Inc.}
-\centerline{v\versionnumber{} for GNU Emacs version \versionemacs, \versionyear}
-\centerline{designed by Stephen Gildea}
-
-Permission is granted to make and distribute copies of
-this card provided the copyright notice and this permission notice
-are preserved on all copies.
-
-For copies of the GNU Emacs manual, write to the Free Software
-Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-\endgroup}
-
-% make \bye not \outer so that the \def\bye in the \else clause below
-% can be scanned without complaint.
-\def\bye{\par\vfill\supereject\end}
-
-\newdimen\intercolumnskip	%horizontal space between columns
-\newbox\columna			%boxes to hold columns already built
-\newbox\columnb
-
-\def\ncolumns{\the\columnsperpage}
-
-\message{[\ncolumns\space
-  column\if 1\ncolumns\else s\fi\space per page]}
-
-\def\scaledmag#1{ scaled \magstep #1}
-
-% This multi-way format was designed by Stephen Gildea October 1986.
-% Note that the 1-column format is fontfamily-independent.
-\if 1\ncolumns			%one-column format uses normal size
-  \hsize 4in
-  \vsize 10in
-  \voffset -.7in
-  \font\titlefont=\fontname\tenbf \scaledmag3
-  \font\headingfont=\fontname\tenbf \scaledmag2
-  \font\smallfont=\fontname\sevenrm
-  \font\smallsy=\fontname\sevensy
-
-  \footline{\hss\folio}
-  \def\makefootline{\baselineskip10pt\hsize6.5in\line{\the\footline}}
-\else				%2 or 3 columns uses prereduced size
-  \hsize 3.2in
-  \if 1\the\letterpaper
-     \vsize 7.95in
-  \else
-     \vsize 7.65in
-  \fi
-  \hoffset -.75in
-  \voffset -.745in
-  \font\titlefont=cmbx10 \scaledmag2
-  \font\headingfont=cmbx10 \scaledmag1
-  \font\smallfont=cmr6
-  \font\smallsy=cmsy6
-  \font\eightrm=cmr8
-  \font\eightbf=cmbx8
-  \font\eightit=cmti8
-  \font\eighttt=cmtt8
-  \font\eightmi=cmmi8
-  \font\eightsy=cmsy8
-  \textfont0=\eightrm
-  \textfont1=\eightmi
-  \textfont2=\eightsy
-  \def\rm{\eightrm}
-  \def\bf{\eightbf}
-  \def\it{\eightit}
-  \def\tt{\eighttt}
-  \if 1\the\letterpaper
-     \normalbaselineskip=.8\normalbaselineskip
-  \else
-     \normalbaselineskip=.7\normalbaselineskip
-  \fi
-  \normallineskip=.8\normallineskip
-  \normallineskiplimit=.8\normallineskiplimit
-  \normalbaselines\rm		%make definitions take effect
-
-  \if 2\ncolumns
-    \let\maxcolumn=b
-    \footline{\hss\rm\folio\hss}
-    \def\makefootline{\vskip 2in \hsize=6.86in\line{\the\footline}}
-  \else \if 3\ncolumns
-    \let\maxcolumn=c
-    \nopagenumbers
-  \else
-    \errhelp{You must set \columnsperpage equal to 1, 2, or 3.}
-    \errmessage{Illegal number of columns per page}
-  \fi\fi
-
-  \intercolumnskip=.46in
-  \def\abc{a}
-  \output={%			%see The TeXbook page 257
-      % This next line is useful when designing the layout.
-      %\immediate\write16{Column \folio\abc\space starts with \firstmark}
-      \if \maxcolumn\abc \multicolumnformat \global\def\abc{a}
-      \else\if a\abc
-	\global\setbox\columna\columnbox \global\def\abc{b}
-        %% in case we never use \columnb (two-column mode)
-        \global\setbox\columnb\hbox to -\intercolumnskip{}
-      \else
-	\global\setbox\columnb\columnbox \global\def\abc{c}\fi\fi}
-  \def\multicolumnformat{\shipout\vbox{\makeheadline
-      \hbox{\box\columna\hskip\intercolumnskip
-        \box\columnb\hskip\intercolumnskip\columnbox}
-      \makefootline}\advancepageno}
-  \def\columnbox{\leftline{\pagebody}}
-
-  \def\bye{\par\vfill\supereject
-    \if a\abc \else\null\vfill\eject\fi
-    \if a\abc \else\null\vfill\eject\fi
-    \end}
-\fi
-
-% we won't be using math mode much, so redefine some of the characters
-% we might want to talk about
-\catcode`\^=12
-\catcode`\_=12
-
-\chardef\\=`\\
-\chardef\{=`\{
-\chardef\}=`\}
-
-\hyphenation{mini-buf-fer}
-
-\parindent 0pt
-\parskip 1ex plus .5ex minus .5ex
-
-\def\small{\smallfont\textfont2=\smallsy\baselineskip=.8\baselineskip}
-
-% newcolumn - force a new column.  Use sparingly, probably only for
-% the first column of a page, which should have a title anyway.
-\outer\def\newcolumn{\vfill\eject}
-
-% title - page title.  Argument is title text.
-\outer\def\title#1{{\titlefont\centerline{#1}}\vskip 1ex plus .5ex}
-
-% section - new major section.  Argument is section name.
-\outer\def\section#1{\par\filbreak
-  \vskip 3ex plus 2ex minus 2ex {\headingfont #1}\mark{#1}%
-  \vskip 2ex plus 1ex minus 1.5ex}
-
-\newdimen\keyindent
-
-% beginindentedkeys...endindentedkeys - key definitions will be
-% indented, but running text, typically used as headings to group
-% definitions, will not.
-\def\beginindentedkeys{\keyindent=1em}
-\def\endindentedkeys{\keyindent=0em}
-\endindentedkeys
-
-% paralign - begin paragraph containing an alignment.
-% If an \halign is entered while in vertical mode, a parskip is never
-% inserted.  Using \paralign instead of \halign solves this problem.
-\def\paralign{\vskip\parskip\halign}
-
-% \<...> - surrounds a variable name in a code example
-\def\<#1>{{\it #1\/}}
-
-% kbd - argument is characters typed literally.  Like the Texinfo command.
-\def\kbd#1{{\tt#1}\null}	%\null so not an abbrev even if period follows
-
-% beginexample...endexample - surrounds literal text, such a code example.
-% typeset in a typewriter font with line breaks preserved
-\def\beginexample{\par\leavevmode\begingroup
-  \obeylines\obeyspaces\parskip0pt\tt}
-{\obeyspaces\global\let =\ }
-\def\endexample{\endgroup}
-
-% key - definition of a key.
-% \key{description of key}{key-name}
-% prints the description left-justified, and the key-name in a \kbd
-% form near the right margin.
-\def\key#1#2{\leavevmode\hbox to \hsize{\vtop
-  {\hsize=.75\hsize\rightskip=1em
-  \hskip\keyindent\relax#1}\kbd{#2}\hfil}}
-
-\newbox\metaxbox
-\setbox\metaxbox\hbox{\kbd{M-x }}
-\newdimen\metaxwidth
-\metaxwidth=\wd\metaxbox
-
-% metax - definition of a M-x command.
-% \metax{description of command}{M-x command-name}
-% Tries to justify the beginning of the command name at the same place
-% as \key starts the key name.  (The "M-x " sticks out to the left.)
-\def\metax#1#2{\leavevmode\hbox to \hsize{\hbox to .75\hsize
-  {\hskip\keyindent\relax#1\hfil}%
-  \hskip -\metaxwidth minus 1fil
-  \kbd{#2}\hfil}}
-
-% threecol - like "key" but with two key names.
-% for example, one for doing the action backward, and one for forward.
-\def\threecol#1#2#3{\hskip\keyindent\relax#1\hfil&\kbd{#2}\hfil\quad
-  &\kbd{#3}\hfil\quad\cr}
-
-%**end of header
-
-
-\title{GNU Emacs Reference Card}
-
-\centerline{(for version \versionemacs)}
-
-\section{Starting Emacs}
-
-To enter GNU Emacs \versionemacs, just type its name: \kbd{emacs}
-
-\section{Leaving Emacs}
-
-\key{suspend Emacs (or iconify it under X)}{C-z}
-\key{exit Emacs permanently}{C-x C-c}
-
-\section{Files}
-
-\key{{\bf read} a file into Emacs}{C-x C-f}
-\key{{\bf save} a file back to disk}{C-x C-s}
-\key{save {\bf all} files}{C-x s}
-\key{{\bf insert} contents of another file into this buffer}{C-x i}
-\key{replace this file with the file you really want}{C-x C-v}
-\key{write buffer to a specified file}{C-x C-w}
-\key{toggle read-only status of buffer}{C-x C-q}
-
-\section{Getting Help}
-
-The help system is simple.  Type \kbd{C-h} (or \kbd{F1}) and follow
-the directions.  If you are a first-time user, type \kbd{C-h t} for a
-{\bf tutorial}.
-
-\key{remove help window}{C-x 1}
-\key{scroll help window}{C-M-v}
-
-\key{apropos: show commands matching a string}{C-h a}
-\key{describe the function a key runs}{C-h k}
-\key{describe a function}{C-h f}
-\key{get mode-specific information}{C-h m}
-
-\section{Error Recovery}
-
-\key{{\bf abort} partially typed or executing command}{C-g}
-\metax{{\bf recover} files lost by a system crash}{M-x recover-session}
-\metax{{\bf undo} an unwanted change}{C-x u, C-_ {\rm or} C-/}
-\metax{restore a buffer to its original contents}{M-x revert-buffer}
-\key{redraw garbaged screen}{C-l}
-
-\section{Incremental Search}
-
-\key{search forward}{C-s}
-\key{search backward}{C-r}
-\key{regular expression search}{C-M-s}
-\key{reverse regular expression search}{C-M-r}
-
-\key{select previous search string}{M-p}
-\key{select next later search string}{M-n}
-\key{exit incremental search}{RET}
-\key{undo effect of last character}{DEL}
-\key{abort current search}{C-g}
-
-Use \kbd{C-s} or \kbd{C-r} again to repeat the search in either direction.
-If Emacs is still searching, \kbd{C-g} cancels only the part not matched.
-
-\shortcopyrightnotice
-
-\section{Motion}
-
-\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
-\threecol{{\bf entity to move over}}{{\bf backward}}{{\bf forward}}
-\threecol{character}{C-b}{C-f}
-\threecol{word}{M-b}{M-f}
-\threecol{line}{C-p}{C-n}
-\threecol{go to line beginning (or end)}{C-a}{C-e}
-\threecol{sentence}{M-a}{M-e}
-\threecol{paragraph}{M-\{}{M-\}}
-\threecol{page}{C-x [}{C-x ]}
-\threecol{sexp}{C-M-b}{C-M-f}
-\threecol{function}{C-M-a}{C-M-e}
-\threecol{go to buffer beginning (or end)}{M-<}{M->}
-}
-
-\key{scroll to next screen}{C-v}
-\key{scroll to previous screen}{M-v}
-\key{scroll left}{C-x <}
-\key{scroll right}{C-x >}
-\key{scroll current line to center of screen}{C-u C-l}
-
-\section{Killing and Deleting}
-
-\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
-\threecol{{\bf entity to kill}}{{\bf backward}}{{\bf forward}}
-\threecol{character (delete, not kill)}{DEL}{C-d}
-\threecol{word}{M-DEL}{M-d}
-\threecol{line (to end of)}{M-0 C-k}{C-k}
-\threecol{sentence}{C-x DEL}{M-k}
-\threecol{sexp}{M-- C-M-k}{C-M-k}
-}
-
-\key{kill {\bf region}}{C-w}
-\key{copy region to kill ring}{M-w}
-\key{kill through next occurrence of {\it char}}{M-z {\it char}}
-
-\key{yank back last thing killed}{C-y}
-\key{replace last yank with previous kill}{M-y}
-
-\section{Marking}
-
-\key{set mark here}{C-@ {\rm or} C-SPC}
-\key{exchange point and mark}{C-x C-x}
-
-\key{set mark {\it arg\/} {\bf words} away}{M-@}
-\key{mark {\bf paragraph}}{M-h}
-\key{mark {\bf page}}{C-x C-p}
-\key{mark {\bf sexp}}{C-M-@}
-\key{mark {\bf function}}{C-M-h}
-\key{mark entire {\bf buffer}}{C-x h}
-
-\section{Query Replace}
-
-\key{interactively replace a text string}{M-\%}
-% query-replace-regexp is bound to C-M-% but that can't be typed on
-% consoles.
-\metax{using regular expressions}{M-x query-replace-regexp}
-
-Valid responses in query-replace mode are
-
-\key{{\bf replace} this one, go on to next}{SPC}
-\key{replace this one, don't move}{,}
-\key{{\bf skip} to next without replacing}{DEL}
-\key{replace all remaining matches}{!}
-\key{{\bf back up} to the previous match}{^}
-\key{{\bf exit} query-replace}{RET}
-\key{enter recursive edit (\kbd{C-M-c} to exit)}{C-r}
-
-\section{Multiple Windows}
-
-When two commands are shown, the second is a similar command for a
-frame instead of a window.
-
-{\setbox0=\hbox{\kbd{0}}\advance\hsize by 0\wd0
-\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
-\threecol{delete all other windows}{C-x 1\ \ \ \ }{C-x 5 1}
-\threecol{split window, above and below}{C-x 2\ \ \ \ }{C-x 5 2}
-\threecol{delete this window}{C-x 0\ \ \ \ }{C-x 5 0}
-}}
-\key{split window, side by side}{C-x 3}
-
-\key{scroll other window}{C-M-v}
-
-{\setbox0=\hbox{\kbd{0}}\advance\hsize by 2\wd0
-\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
-\threecol{switch cursor to another window}{C-x o}{C-x 5 o}
-
-\threecol{select buffer in other window}{C-x 4 b}{C-x 5 b}
-\threecol{display buffer in other window}{C-x 4 C-o}{C-x 5 C-o}
-\threecol{find file in other window}{C-x 4 f}{C-x 5 f}
-\threecol{find file read-only in other window}{C-x 4 r}{C-x 5 r}
-\threecol{run Dired in other window}{C-x 4 d}{C-x 5 d}
-\threecol{find tag in other window}{C-x 4 .}{C-x 5 .}
-}}
-
-\key{grow window taller}{C-x ^}
-\key{shrink window narrower}{C-x \{}
-\key{grow window wider}{C-x \}}
-
-\section{Formatting}
-
-\key{indent current {\bf line} (mode-dependent)}{TAB}
-\key{indent {\bf region} (mode-dependent)}{C-M-\\}
-\key{indent {\bf sexp} (mode-dependent)}{C-M-q}
-\key{indent region rigidly {\it arg\/} columns}{C-x TAB}
-
-\key{insert newline after point}{C-o}
-\key{move rest of line vertically down}{C-M-o}
-\key{delete blank lines around point}{C-x C-o}
-\key{join line with previous (with arg, next)}{M-^}
-\key{delete all white space around point}{M-\\}
-\key{put exactly one space at point}{M-SPC}
-
-\key{fill paragraph}{M-q}
-\key{set fill column}{C-x f}
-\key{set prefix each line starts with}{C-x .}
-
-\key{set face}{M-o}
-
-\section{Case Change}
-
-\key{uppercase word}{M-u}
-\key{lowercase word}{M-l}
-\key{capitalize word}{M-c}
-
-\key{uppercase region}{C-x C-u}
-\key{lowercase region}{C-x C-l}
-
-\section{The Minibuffer}
-
-The following keys are defined in the minibuffer.
-
-\key{complete as much as possible}{TAB}
-\key{complete up to one word}{SPC}
-\key{complete and execute}{RET}
-\key{show possible completions}{?}
-\key{fetch previous minibuffer input}{M-p}
-\key{fetch later minibuffer input or default}{M-n}
-\key{regexp search backward through history}{M-r}
-\key{regexp search forward through history}{M-s}
-\key{abort command}{C-g}
-
-Type \kbd{C-x ESC ESC} to edit and repeat the last command that used the
-minibuffer.  Type \kbd{F10} to activate menu bar items on text terminals.
-
-\newcolumn
-\title{GNU Emacs Reference Card}
-
-\section{Buffers}
-
-\key{select another buffer}{C-x b}
-\key{list all buffers}{C-x C-b}
-\key{kill a buffer}{C-x k}
-
-\section{Transposing}
-
-\key{transpose {\bf characters}}{C-t}
-\key{transpose {\bf words}}{M-t}
-\key{transpose {\bf lines}}{C-x C-t}
-\key{transpose {\bf sexps}}{C-M-t}
-
-\section{Spelling Check}
-
-\key{check spelling of current word}{M-\$}
-\metax{check spelling of all words in region}{M-x ispell-region}
-\metax{check spelling of entire buffer}{M-x ispell-buffer}
-
-\section{Tags}
-
-\key{find a tag (a definition)}{M-.}
-\key{find next occurrence of tag}{C-u M-.}
-\metax{specify a new tags file}{M-x visit-tags-table}
-
-\metax{regexp search on all files in tags table}{M-x tags-search}
-\metax{run query-replace on all the files}{M-x tags-query-replace}
-\key{continue last tags search or query-replace}{M-,}
-
-\section{Shells}
-
-\key{execute a shell command}{M-!}
-\key{run a shell command on the region}{M-|}
-\key{filter region through a shell command}{C-u M-|}
-\key{start a shell in window \kbd{*shell*}}{M-x shell}
-
-\section{Rectangles}
-
-\key{copy rectangle to register}{C-x r r}
-\key{kill rectangle}{C-x r k}
-\key{yank rectangle}{C-x r y}
-\key{open rectangle, shifting text right}{C-x r o}
-\key{blank out rectangle}{C-x r c}
-\key{prefix each line with a string}{C-x r t}
-
-\section{Abbrevs}
-
-\key{add global abbrev}{C-x a g}
-\key{add mode-local abbrev}{C-x a l}
-\key{add global expansion for this abbrev}{C-x a i g}
-\key{add mode-local expansion for this abbrev}{C-x a i l}
-\key{explicitly expand abbrev}{C-x a e}
-
-\key{expand previous word dynamically}{M-/}
-
-\section{Regular Expressions}
-
-\key{any single character except a newline}{. {\rm(dot)}}
-\key{zero or more repeats}{*}
-\key{one or more repeats}{+}
-\key{zero or one repeat}{?}
-\key{quote regular expression special character {\it c\/}}{\\{\it c}}
-\key{alternative (``or'')}{\\|}
-\key{grouping}{\\( {\rm$\ldots$} \\)}
-\key{same text as {\it n\/}th group}{\\{\it n}}
-\key{at word break}{\\b}
-\key{not at word break}{\\B}
-
-\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
-\threecol{{\bf entity}}{{\bf match start}}{{\bf match end}}
-\threecol{line}{^}{\$}
-\threecol{word}{\\<}{\\>}
-\threecol{buffer}{\\`}{\\'}
-
-\threecol{{\bf class of characters}}{{\bf match these}}{{\bf match others}}
-\threecol{explicit set}{[ {\rm$\ldots$} ]}{[^ {\rm$\ldots$} ]}
-\threecol{word-syntax character}{\\w}{\\W}
-\threecol{character with syntax {\it c}}{\\s{\it c}}{\\S{\it c}}
-}
-
-\section{International Character Sets}
-
-\key{specify principal language}{C-x RET l}
-\metax{show all input methods}{M-x list-input-methods}
-\key{enable or disable input method}{C-\\}
-\key{set coding system for next command}{C-x RET c}
-\metax{show all coding systems}{M-x list-coding-systems}
-\metax{choose preferred coding system}{M-x prefer-coding-system}
-
-\section{Info}
-
-\key{enter the Info documentation reader}{C-h i}
-\key{find specified function or variable in Info}{C-h S}
-\beginindentedkeys
-
-Moving within a node:
-
-\key{scroll forward}{SPC}
-\key{scroll reverse}{DEL}
-\key{beginning of node}{. {\rm (dot)}}
-
-Moving between nodes:
-
-\key{{\bf next} node}{n}
-\key{{\bf previous} node}{p}
-\key{move {\bf up}}{u}
-\key{select menu item by name}{m}
-\key{select {\it n\/}th menu item by number (1--9)}{{\it n}}
-\key{follow cross reference  (return with \kbd{l})}{f}
-\key{return to last node you saw}{l}
-\key{return to directory node}{d}
-\key{go to top node of Info file}{t}
-\key{go to any node by name}{g}
-
-Other:
-
-\key{run Info {\bf tutorial}}{h}
-\key{look up a subject in the indices}{i}
-\key{search nodes for regexp}{s}
-\key{{\bf quit} Info}{q}
-
-\endindentedkeys
-
-\section{Registers}
-
-\key{save region in register}{C-x r s}
-\key{insert register contents into buffer}{C-x r i}
-
-\key{save value of point in register}{C-x r SPC}
-\key{jump to point saved in register}{C-x r j}
-
-\section{Keyboard Macros}
-
-\key{{\bf start} defining a keyboard macro}{C-x (}
-\key{{\bf end} keyboard macro definition}{C-x )}
-\key{{\bf execute} last-defined keyboard macro}{C-x e}
-\key{append to last keyboard macro}{C-u C-x (}
-\metax{name last keyboard macro}{M-x name-last-kbd-macro}
-\metax{insert Lisp definition in buffer}{M-x insert-kbd-macro}
-
-\section{Commands Dealing with Emacs Lisp}
-
-\key{eval {\bf sexp} before point}{C-x C-e}
-\key{eval current {\bf defun}}{C-M-x}
-\metax{eval {\bf region}}{M-x eval-region}
-\key{read and eval minibuffer}{M-:}
-\metax{load from standard system directory}{M-x load-library}
-
-\section{Simple Customization}
-
-\metax{customize variables and faces}{M-x customize}
-
-% The intended audience here is the person who wants to make simple
-% customizations and knows Lisp syntax.
-
-Making global key bindings in Emacs Lisp (examples):
-
-\beginexample%
-(global-set-key "\\C-cg" 'goto-line)
-(global-set-key "\\M-\#" 'query-replace-regexp)
-\endexample
-
-\section{Writing Commands}
-
-\beginexample%
-(defun \<command-name> (\<args>)
-  "\<documentation>" (interactive "\<template>")
-  \<body>)
-\endexample
-
-An example:
-
-\beginexample%
-(defun this-line-to-top-of-window (line)
-  "Reposition current line to top of window.
-With ARG, put point on line ARG."
-  (interactive "P")
-  (recenter (if (null line)
-                0
-              (prefix-numeric-value line))))
-\endexample
-
-The \kbd{interactive} spec says how to read arguments interactively.
-Type \kbd{C-h f interactive} for more details.
-
-\copyrightnotice
-
-\bye
-
-% Local variables:
-% compile-command: "tex refcard"
-% End:
-
-% arch-tag: d67bdf5d-b77c-44eb-a22e-f4f7d25174d2