Mercurial > emacs

changeset 31679:7e706d145fab

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Revert to Unix line endings.
author Andrew Innes <andrewi@gnu.org>
date Sun, 17 Sep 2000 21:00:02 +0000
parents 30d8d153fa6e
children 703fb2494c1b
files nt/gmake.defs nt/nmake.defs
diffstat 2 files changed, 453 insertions(+), 453 deletions(-) [+]
line wrap: on
line diff
--- a/nt/gmake.defs	Sun Sep 17 20:58:19 2000 +0000
+++ b/nt/gmake.defs	Sun Sep 17 21:00:02 2000 +0000
@@ -1,234 +1,234 @@
-#
-#  Makefile definition file for building GNU Emacs on Windows NT
-#  
-#  GNU Emacs is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2, or (at your option)
-#  any later version.
-#  
-#  GNU Emacs is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#  
-#  You should have received a copy of the GNU General Public License
-#  along with GNU Emacs; see the file COPYING.  If not, write to
-#  the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-#  Boston, MA 02111-1307, USA.
-
-# Ensure 'all' is the default target
-all:
-
-# NOTES
-# 
-# I tried to force gmake to use the native shell for simplicity, by
-# setting SHELL as below, but this didn't work reliably because of
-# various case sensitivity niggles.  Specifically, COMSPEC (which is in
-# fact usually spelled ComSpec on NT, to make life difficult) typically
-# references "cmd.exe" (on NT) when the file is actually called
-# "CMD.EXE" on disk for hysterical raisons.  As a result, GNU make
-# thinks it doesn't exist (unless compiled with a switch to ignore
-# case), and so doesn't change which shell it will invoke to execute
-# commands.
-# 
-# It would be possible, though very tedious using just gmake facilities,
-# to convert the COMSPEC value to uppercase to solve this problem, but
-# it isn't worth it.  That is partly because, even when using the native
-# shell, gmake tends to not be happy with backslashes in command
-# strings.  The obvious solution is to use forward slashes as much as
-# possible, which can be made to work most of the time (putting
-# filenames in quotes often helps), but there are still some internal
-# cmd.exe commands like `del' and `copy' that won't work with them.
-# Although it is possible to convert slashes to backslashes when
-# necessary, gmake requires explicitly calling its subst function, which
-# nmake does not understand).  For this reason, it is simplest to
-# mandate that rm and cp be available, so we can use Unix-format file
-# names everywhere.  (Fortunately both MS and GNU make, and the
-# respective compilers, are happy with Unix-format names.)
-# 
-# Since we cannot easily force the choice of a particular shell, we must
-# make the effort to cope with whichever shell is being used.
-# Fortunately, the only command we need to use that is shell specific is
-# the testing of a file's existence for the purpose of working out when
-# we are copying files to their original location.  That particular
-# requirement is abstracted easily enough.
-# 
-# The only other problem area was the change of directory when running
-# temacs to dump emacs.exe (where gmake doesn't support cd foo in any
-# useful way), but that has been resolved by modifying the Windows
-# unexec function slightly to not require the directory change while
-# still allowing objects and binaries to be in subdirectories.
-
-# This doesn't work.
-#SHELL:=$(COMSPEC)
-
-# Determine whether make is using sh or cmd/command as shell; cmd.exe
-# will output "ECHO is on" when echo is given by itself, while sh will
-# not produce any output.
-sh_output := $(shell echo)
-ifeq "$(findstring ECHO, $(sh_output))" "ECHO"
-THE_SHELL = $(COMSPEC)$(ComSpec)
-SHELLTYPE=CMD
-else
-USING_SH = 1
-THE_SHELL = $(SHELL)
-SHELLTYPE=SH
-SETLOADPATH=EMACSLOADPATH=$(lisp)
-endif
-
-MAKEDIR = $(CURDIR)
-ALL_DEPS	= $^
-EMPTY =
-SPACE = $(EMPTY) $(EMPTY)
-
-SUBSYSTEM_WINDOWS=-Wl,-subsystem,windows
-SUBSYSTEM_CONSOLE=-Wl,-subsystem,console
-
-# INSTALL_DIR is the directory into which emacs will be installed.
-#
-ifndef INSTALL_DIR
-INSTALL_DIR     = $(MAKEDIR)/..
-endif
-
-# Determine the architecture we're running on.
-# Define ARCH for our purposes; 
-# Define CPU for use by ntwin32.mak;
-# Define CONFIG_H to the appropriate config.h for the system;
-#
-ifdef PROCESSOR_ARCHITECTURE
-# We're on Windows NT
-CPU		= $(PROCESSOR_ARCHITECTURE)
-CONFIG_H	= config.nt
-OS_TYPE		= windowsnt
- ifeq "$(PROCESSOR_ARCHITECTURE)" "x86"
-ARCH		= i386
-CPU		= i386
- else
-  ifeq "$(PROCESSOR_ARCHITECTURE)" "MIPS"
-ARCH		= mips
-  else
-   ifeq "$(PROCESSOR_ARCHITECTURE)" "ALPHA"
-ARCH		= alpha
-   else
-    ifeq "$(PROCESSOR_ARCHITECTURE)" "PPC"
-ARCH		= ppc
-    else
-error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)"
-    endif
-   endif
-  endif
- endif
-else
-# We're on Windows 95
-ARCH		= i386
-CPU		= i386
-CONFIG_H	= config.nt
-OS_TYPE		= windows95
-endif
-
-AR		= ar -rsc
-AR_OUT		=
-CC		= gcc
-CC_OUT		= -o$(SPACE)
-LINK		= gcc
-LINK_OUT	= -o$(SPACE)
-RC		= windres -O coff
-RC_OUT		= -o$(SPACE)
-RC_INCLUDE	= --include-dir$(SPACE)
-
-libc		= 
-baselibs	= 
-O		= o
-A		= a
-
-BASE_LIBS	= $(libc) $(baselibs)
-
-ADVAPI32	= -ladvapi32
-COMDLG32	= -lcomdlg32
-GDI32		= -lgdi32
-MPR		= -lmpr
-SHELL32		= -lshell32
-USER32		= -luser32
-WSOCK32		= -lwsock32
-
-ifdef NOOPT
-DEBUG_CFLAGS	= -DEMACSDEBUG
-else
-DEBUG_CFLAGS	= 
-endif
-CFLAGS          = -I. -DWIN32_LEAN_AND_MEAN $(ARCH_CFLAGS) -D$(ARCH) \
-		  -D_CRTAPI1=_cdecl \
-		  $(DEBUG_CFLAGS) $(USER_CFLAGS) $(LOCAL_FLAGS)
-EMACS_EXTRA_C_FLAGS = -DUSE_CRT_DLL=1
-
-# see comments in allocate_heap in w32heap.c before changing any of the
-# -stack, -heap, or -image-base settings.
-TEMACS_EXTRA_LINK = -Wl,-stack,0x00800000 -Wl,-heap,0x00100000 -Wl,-image-base,0x01000000 -g $(SUBSYSTEM_CONSOLE) -Wl,-entry,__start -Wl,-Map,$(BLD)/temacs.map
-
-ifdef NOOPT
-OBJDIR          = oo
-else
-OBJDIR          = oo-spd
-endif
-$(OBJDIR):;	-mkdir "$(OBJDIR)"
-BLD             = $(OBJDIR)/$(ARCH)
-$(BLD):         $(OBJDIR)
-		-mkdir "$(BLD)"
-
-CP		= cp -f
-CP_DIR		= cp -rf
-DEL		= rm
-DEL_TREE	= rm -r
-ifdef USING_SH
-IFNOTSAMEDIR	= if [ ! -s ../same-dir.tst ] ; then
-FOREACH		= for f in
-FORVAR		= $${f}
-FORDO		= ; do
-ENDFOR		= ; done
-ENDIF		= ; fi
-ARGQUOTE	= '
-DQUOTE		= ""
-else
-IFNOTSAMEDIR	= if not exist ../same-dir.tst
-FOREACH		= for %%f in (
-FORVAR		= %%f
-FORDO		= ) do
-ENDFOR		=
-ENDIF		=
-ARGQUOTE	= "
-DQUOTE		= \"
-endif
-
-# The location of the icon file
-EMACS_ICON_PATH = ../nt/emacs.ico
-
-ifdef NODEBUG
-DEBUG_FLAG = 
-else
-DEBUG_FLAG = -g
-endif
-
-ifdef NOCYGWIN
-NOCYGWIN = -mno-cygwin
-endif
-
-ifeq "$(ARCH)" "i386"
-ifdef NOOPT
-ARCH_CFLAGS     = -D_X86_=1 -c $(DEBUG_FLAG) $(NOCYGWIN)
-else
-ARCH_CFLAGS     = -D_X86_=1 -c $(DEBUG_FLAG) $(NOCYGWIN) -mcpu=i686 -O2 \
-		  # -fbuiltin \
-		  # -finline-functions \
-		  # -fomit-frame-pointer
-endif
-ARCH_LDFLAGS	= $(SYS_LDFLAGS)
-else
-ERROR Unknown architecture type "$(ARCH)".
-endif
-
-LINK_FLAGS	= $(ARCH_LDFLAGS) $(NOCYGWIN) $(USER_LDFLAGS)
-
-.DEFAULT:
-
-$(BLD)/%.o: %.c
-		$(CC) $(CFLAGS) $(CC_OUT)$@ $<
+#
+#  Makefile definition file for building GNU Emacs on Windows NT
+#  
+#  GNU Emacs is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#  
+#  GNU Emacs is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#  
+#  You should have received a copy of the GNU General Public License
+#  along with GNU Emacs; see the file COPYING.  If not, write to
+#  the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+#  Boston, MA 02111-1307, USA.
+
+# Ensure 'all' is the default target
+all:
+
+# NOTES
+# 
+# I tried to force gmake to use the native shell for simplicity, by
+# setting SHELL as below, but this didn't work reliably because of
+# various case sensitivity niggles.  Specifically, COMSPEC (which is in
+# fact usually spelled ComSpec on NT, to make life difficult) typically
+# references "cmd.exe" (on NT) when the file is actually called
+# "CMD.EXE" on disk for hysterical raisons.  As a result, GNU make
+# thinks it doesn't exist (unless compiled with a switch to ignore
+# case), and so doesn't change which shell it will invoke to execute
+# commands.
+# 
+# It would be possible, though very tedious using just gmake facilities,
+# to convert the COMSPEC value to uppercase to solve this problem, but
+# it isn't worth it.  That is partly because, even when using the native
+# shell, gmake tends to not be happy with backslashes in command
+# strings.  The obvious solution is to use forward slashes as much as
+# possible, which can be made to work most of the time (putting
+# filenames in quotes often helps), but there are still some internal
+# cmd.exe commands like `del' and `copy' that won't work with them.
+# Although it is possible to convert slashes to backslashes when
+# necessary, gmake requires explicitly calling its subst function, which
+# nmake does not understand).  For this reason, it is simplest to
+# mandate that rm and cp be available, so we can use Unix-format file
+# names everywhere.  (Fortunately both MS and GNU make, and the
+# respective compilers, are happy with Unix-format names.)
+# 
+# Since we cannot easily force the choice of a particular shell, we must
+# make the effort to cope with whichever shell is being used.
+# Fortunately, the only command we need to use that is shell specific is
+# the testing of a file's existence for the purpose of working out when
+# we are copying files to their original location.  That particular
+# requirement is abstracted easily enough.
+# 
+# The only other problem area was the change of directory when running
+# temacs to dump emacs.exe (where gmake doesn't support cd foo in any
+# useful way), but that has been resolved by modifying the Windows
+# unexec function slightly to not require the directory change while
+# still allowing objects and binaries to be in subdirectories.
+
+# This doesn't work.
+#SHELL:=$(COMSPEC)
+
+# Determine whether make is using sh or cmd/command as shell; cmd.exe
+# will output "ECHO is on" when echo is given by itself, while sh will
+# not produce any output.
+sh_output := $(shell echo)
+ifeq "$(findstring ECHO, $(sh_output))" "ECHO"
+THE_SHELL = $(COMSPEC)$(ComSpec)
+SHELLTYPE=CMD
+else
+USING_SH = 1
+THE_SHELL = $(SHELL)
+SHELLTYPE=SH
+SETLOADPATH=EMACSLOADPATH=../lisp
+endif
+
+MAKEDIR = $(CURDIR)
+ALL_DEPS	= $^
+EMPTY =
+SPACE = $(EMPTY) $(EMPTY)
+
+SUBSYSTEM_WINDOWS=-Wl,-subsystem,windows
+SUBSYSTEM_CONSOLE=-Wl,-subsystem,console
+
+# INSTALL_DIR is the directory into which emacs will be installed.
+#
+ifndef INSTALL_DIR
+INSTALL_DIR     = $(MAKEDIR)/..
+endif
+
+# Determine the architecture we're running on.
+# Define ARCH for our purposes; 
+# Define CPU for use by ntwin32.mak;
+# Define CONFIG_H to the appropriate config.h for the system;
+#
+ifdef PROCESSOR_ARCHITECTURE
+# We're on Windows NT
+CPU		= $(PROCESSOR_ARCHITECTURE)
+CONFIG_H	= config.nt
+OS_TYPE		= windowsnt
+ ifeq "$(PROCESSOR_ARCHITECTURE)" "x86"
+ARCH		= i386
+CPU		= i386
+ else
+  ifeq "$(PROCESSOR_ARCHITECTURE)" "MIPS"
+ARCH		= mips
+  else
+   ifeq "$(PROCESSOR_ARCHITECTURE)" "ALPHA"
+ARCH		= alpha
+   else
+    ifeq "$(PROCESSOR_ARCHITECTURE)" "PPC"
+ARCH		= ppc
+    else
+error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)"
+    endif
+   endif
+  endif
+ endif
+else
+# We're on Windows 95
+ARCH		= i386
+CPU		= i386
+CONFIG_H	= config.nt
+OS_TYPE		= windows95
+endif
+
+AR		= ar -rsc
+AR_OUT		=
+CC		= gcc
+CC_OUT		= -o$(SPACE)
+LINK		= gcc
+LINK_OUT	= -o$(SPACE)
+RC		= windres -O coff
+RC_OUT		= -o$(SPACE)
+RC_INCLUDE	= --include-dir$(SPACE)
+
+libc		= 
+baselibs	= 
+O		= o
+A		= a
+
+BASE_LIBS	= $(libc) $(baselibs)
+
+ADVAPI32	= -ladvapi32
+COMDLG32	= -lcomdlg32
+GDI32		= -lgdi32
+MPR		= -lmpr
+SHELL32		= -lshell32
+USER32		= -luser32
+WSOCK32		= -lwsock32
+
+ifdef NOOPT
+DEBUG_CFLAGS	= -DEMACSDEBUG
+else
+DEBUG_CFLAGS	= 
+endif
+CFLAGS          = -I. -DWIN32_LEAN_AND_MEAN $(ARCH_CFLAGS) -D$(ARCH) \
+		  -D_CRTAPI1=_cdecl \
+		  $(DEBUG_CFLAGS) $(USER_CFLAGS) $(LOCAL_FLAGS)
+EMACS_EXTRA_C_FLAGS = -DUSE_CRT_DLL=1
+
+# see comments in allocate_heap in w32heap.c before changing any of the
+# -stack, -heap, or -image-base settings.
+TEMACS_EXTRA_LINK = -Wl,-stack,0x00800000 -Wl,-heap,0x00100000 -Wl,-image-base,0x01000000 -g $(SUBSYSTEM_CONSOLE) -Wl,-entry,__start -Wl,-Map,$(BLD)/temacs.map
+
+ifdef NOOPT
+OBJDIR          = oo
+else
+OBJDIR          = oo-spd
+endif
+$(OBJDIR):;	-mkdir "$(OBJDIR)"
+BLD             = $(OBJDIR)/$(ARCH)
+$(BLD):         $(OBJDIR)
+		-mkdir "$(BLD)"
+
+CP		= cp -f
+CP_DIR		= cp -rf
+DEL		= rm
+DEL_TREE	= rm -r
+ifdef USING_SH
+IFNOTSAMEDIR	= if [ ! -s ../same-dir.tst ] ; then
+FOREACH		= for f in
+FORVAR		= $${f}
+FORDO		= ; do
+ENDFOR		= ; done
+ENDIF		= ; fi
+ARGQUOTE	= '
+DQUOTE		= ""
+else
+IFNOTSAMEDIR	= if not exist ../same-dir.tst
+FOREACH		= for %%f in (
+FORVAR		= %%f
+FORDO		= ) do
+ENDFOR		=
+ENDIF		=
+ARGQUOTE	= "
+DQUOTE		= \"
+endif
+
+# The location of the icon file
+EMACS_ICON_PATH = ../nt/emacs.ico
+
+ifdef NODEBUG
+DEBUG_FLAG = 
+else
+DEBUG_FLAG = -g
+endif
+
+ifdef NOCYGWIN
+NOCYGWIN = -mno-cygwin
+endif
+
+ifeq "$(ARCH)" "i386"
+ifdef NOOPT
+ARCH_CFLAGS     = -D_X86_=1 -c $(DEBUG_FLAG) $(NOCYGWIN)
+else
+ARCH_CFLAGS     = -D_X86_=1 -c $(DEBUG_FLAG) $(NOCYGWIN) -mcpu=i686 -O2 \
+		  # -fbuiltin \
+		  # -finline-functions \
+		  # -fomit-frame-pointer
+endif
+ARCH_LDFLAGS	= $(SYS_LDFLAGS)
+else
+ERROR Unknown architecture type "$(ARCH)".
+endif
+
+LINK_FLAGS	= $(ARCH_LDFLAGS) $(NOCYGWIN) $(USER_LDFLAGS)
+
+.DEFAULT:
+
+$(BLD)/%.o: %.c
+		$(CC) $(CFLAGS) $(CC_OUT)$@ $<
--- a/nt/nmake.defs	Sun Sep 17 20:58:19 2000 +0000
+++ b/nt/nmake.defs	Sun Sep 17 21:00:02 2000 +0000
@@ -1,219 +1,219 @@
-#
-#  Makefile definition file for building GNU Emacs on Windows NT
-#  
-#  GNU Emacs is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2, or (at your option)
-#  any later version.
-#  
-#  GNU Emacs is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#  
-#  You should have received a copy of the GNU General Public License
-#  along with GNU Emacs; see the file COPYING.  If not, write to
-#  the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-#  Boston, MA 02111-1307, USA.
-
-# Ensure 'all' is the default target
-all:
-
-THE_SHELL = $(COMSPEC)
-SHELLTYPE=CMD
-
-ALL_DEPS	= $**
-
-SUBSYSTEM_WINDOWS=-subsystem:windows
-SUBSYSTEM_CONSOLE=-subsystem:console
-
-# INSTALL_DIR is the directory into which emacs will be installed.
-#
-!ifndef INSTALL_DIR
-INSTALL_DIR     = $(MAKEDIR)/..
-!endif
-
-# Allow detection of builds with MSVC 5 or later, so we can
-# speed up compiles (see rule at end).
-#
-_NMAKE_VER_5=162
-_NMAKE_VER_4=0
-
-!IFNDEF _NMAKE_VER
-_NMAKE_VER=$(_NMAKE_VER_4)
-!ENDIF
-
-# Check that the INCLUDE and LIB environment variables are set.
-#
-!ifndef INCLUDE
-!error The INCLUDE environment variable needs to be set.
-!endif
-!ifndef LIB
-!error The LIB environment variable needs to be set.
-!endif
-
-# Determine the architecture we're running on.
-# Define ARCH for our purposes; 
-# Define CPU for use by ntwin32.mak;
-# Define CONFIG_H to the appropriate config.h for the system;
-#
-!ifdef PROCESSOR_ARCHITECTURE
-# We're on Windows NT
-CPU		= $(PROCESSOR_ARCHITECTURE)
-CONFIG_H	= config.nt
-OS_TYPE		= windowsnt
-! if "$(PROCESSOR_ARCHITECTURE)" == "x86"
-ARCH		= i386
-CPU		= i386
-! else
-!  if "$(PROCESSOR_ARCHITECTURE)" == "MIPS"
-ARCH		= mips
-!  else
-!   if "$(PROCESSOR_ARCHITECTURE)" == "ALPHA"
-ARCH		= alpha
-!   else
-!    if "$(PROCESSOR_ARCHITECTURE)" == "PPC"
-ARCH		= ppc
-!    else
-!     error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)"
-!    endif
-!   endif
-!  endif
-! endif
-!else
-# We're on Windows 95
-ARCH		= i386
-CPU		= i386
-CONFIG_H	= config.nt
-OS_TYPE		= windows95
-!endif
-
-AR		= lib
-AR_OUT		= -out:
-CC		= cl
-CC_OUT		= -Fo
-LINK		= link
-LINK_OUT	= -out:
-RC		= rc
-RC_OUT		= -Fo
-RC_INCLUDE	= -i
-
-libc		= libc.lib
-baselibs	= 
-O		= obj
-A		= lib
-
-BASE_LIBS	= $(libc) $(baselibs) oldnames.lib
-
-ADVAPI32	= advapi32.lib
-COMDLG32	= comdlg32.lib
-GDI32		= gdi32.lib
-MPR		= mpr.lib
-SHELL32		= shell32.lib
-USER32		= user32.lib
-WSOCK32		= wsock32.lib
-
-!ifdef NOOPT
-DEBUG_CFLAGS	= -DEMACSDEBUG
-!else
-DEBUG_CFLAGS	= 
-!endif
-CFLAGS          = -I. -DWIN32_LEAN_AND_MEAN $(ARCH_CFLAGS) -D$(ARCH) \
-		  -D_CRTAPI1=_cdecl $(DEBUG_CFLAGS) $(USER_CFLAGS) $(LOCAL_FLAGS)
-EMACS_EXTRA_C_FLAGS =
-
-SYS_LDFLAGS	= -release -incremental:no -version:3.10 -swaprun:cd -swaprun:net
-
-# see comments in allocate_heap in w32heap.c before changing any of the
-# -stack, -heap, or -base settings.
-TEMACS_EXTRA_LINK = -stack:0x00800000 -heap:0x00100000 -base:0x01000000 -debug:full -debugtype:both -pdb:$(BLD)\temacs.pdb -machine:$(ARCH) $(SUBSYSTEM_CONSOLE) -entry:_start -map:$(BLD)\temacs.map $(EXTRA_LINK)
-
-!ifdef NOOPT
-OBJDIR          = obj
-!else
-OBJDIR          = obj-spd
-!endif
-$(OBJDIR):;	-mkdir $(OBJDIR)
-BLD             = $(OBJDIR)/$(ARCH)
-$(BLD):         $(OBJDIR)
-		-mkdir "$(BLD)"
-
-CP		= cp -f
-CP_DIR		= cp -rf
-IFNOTSAMEDIR	= if not exist ..\same-dir.tst
-ENDIF		=
-FOREACH		= for %%f in (
-FORVAR		= %%f
-FORDO		= ) do
-ENDFOR		=
-ARGQUOTE	= "
-DQUOTE		= \"
-DEL		= rm
-DEL_TREE	= rm -r
-
-# The location of the icon file
-EMACS_ICON_PATH = ../nt/emacs.ico
-
-!ifdef NODEBUG
-DEBUG_FLAG = 
-!else
-DEBUG_FLAG = -Zi
-!endif
-
-!if "$(ARCH)" == "i386"
-!ifdef NOOPT
-ARCH_CFLAGS     = -nologo -D_X86_=1 -c -Zel -W2 -H63 -Od -G3d -Zp8 $(DEBUG_FLAG)
-!else
-ARCH_CFLAGS     = -nologo -D_X86_=1 -c -Zel -W2 -H63 -Oxsb2 -Oy- -G6dF -Zp8 $(DEBUG_FLAG)
-!endif
-ARCH_LDFLAGS	= $(SYS_LDFLAGS)
-
-!else
-!if "$(ARCH)" == "mips"
-ARCH_CFLAGS     = -D_MIPS_=1 -c -W2 -Zi -Od -Gt0
-ARCH_LDFLAGS	= $(SYS_LDFLAGS)
-
-!else
-!if "$(ARCH)" == "alpha"
-!if "$(BUILD_TYPE)" == "spd"
-ARCH_CFLAGS     = -D_ALPHA_=1 -c -Ze -Zi -W2 -Od -D__stdcall= -D__cdecl=
-!else
-ARCH_CFLAGS     = -D_ALPHA_=1 -c -Ze -Zi -W2 -O1 -D__stdcall= -D__cdecl=
-!endif
-ARCH_LDFLAGS	= $(SYS_LDFLAGS)
-
-!else
-!if "$(ARCH)" == "ppc"
-# These flags are a guess...if they don't work, please send me mail.
-ARCH_CFLAGS	= -D_PPC_=1 -c -Ze -Zi -W2 -Od
-ARCH_LDFLAGS	= $(SYS_LDFLAGS)
-
-!else
-!ERROR Unknown architecture type "$(ARCH)".
-!endif
-!endif
-!endif
-!endif
-
-LINK_FLAGS	= $(ARCH_LDFLAGS) $(USER_LDFLAGS)
-
-# From MSVC 5.0 onwards, it seem base relocation information is not included,
-# at least in release builds.  We need to ensure the reloc info is included
-# in order to use the MSVC profiler.
-!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)")
-EXTRA_LINK      =
-!ELSE
-EXTRA_LINK      = -profile
-!ENDIF
-
-#
-# If the compiler supports compiling multiple .c files to .o files at
-# one time, use this feature.
-#
-!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)")
-.c{$(BLD)}.obj:
-		$(CC) $(CFLAGS) -Fo$(BLD)\ $<
-!ELSE
-.c{$(BLD)}.obj::
-		$(CC) $(CFLAGS) -Fo$(BLD)\ $<
-!ENDIF
+#
+#  Makefile definition file for building GNU Emacs on Windows NT
+#  
+#  GNU Emacs is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#  
+#  GNU Emacs is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#  
+#  You should have received a copy of the GNU General Public License
+#  along with GNU Emacs; see the file COPYING.  If not, write to
+#  the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+#  Boston, MA 02111-1307, USA.
+
+# Ensure 'all' is the default target
+all:
+
+THE_SHELL = $(COMSPEC)
+SHELLTYPE=CMD
+
+ALL_DEPS	= $**
+
+SUBSYSTEM_WINDOWS=-subsystem:windows
+SUBSYSTEM_CONSOLE=-subsystem:console
+
+# INSTALL_DIR is the directory into which emacs will be installed.
+#
+!ifndef INSTALL_DIR
+INSTALL_DIR     = $(MAKEDIR)/..
+!endif
+
+# Allow detection of builds with MSVC 5 or later, so we can
+# speed up compiles (see rule at end).
+#
+_NMAKE_VER_5=162
+_NMAKE_VER_4=0
+
+!IFNDEF _NMAKE_VER
+_NMAKE_VER=$(_NMAKE_VER_4)
+!ENDIF
+
+# Check that the INCLUDE and LIB environment variables are set.
+#
+!ifndef INCLUDE
+!error The INCLUDE environment variable needs to be set.
+!endif
+!ifndef LIB
+!error The LIB environment variable needs to be set.
+!endif
+
+# Determine the architecture we're running on.
+# Define ARCH for our purposes; 
+# Define CPU for use by ntwin32.mak;
+# Define CONFIG_H to the appropriate config.h for the system;
+#
+!ifdef PROCESSOR_ARCHITECTURE
+# We're on Windows NT
+CPU		= $(PROCESSOR_ARCHITECTURE)
+CONFIG_H	= config.nt
+OS_TYPE		= windowsnt
+! if "$(PROCESSOR_ARCHITECTURE)" == "x86"
+ARCH		= i386
+CPU		= i386
+! else
+!  if "$(PROCESSOR_ARCHITECTURE)" == "MIPS"
+ARCH		= mips
+!  else
+!   if "$(PROCESSOR_ARCHITECTURE)" == "ALPHA"
+ARCH		= alpha
+!   else
+!    if "$(PROCESSOR_ARCHITECTURE)" == "PPC"
+ARCH		= ppc
+!    else
+!     error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)"
+!    endif
+!   endif
+!  endif
+! endif
+!else
+# We're on Windows 95
+ARCH		= i386
+CPU		= i386
+CONFIG_H	= config.nt
+OS_TYPE		= windows95
+!endif
+
+AR		= lib
+AR_OUT		= -out:
+CC		= cl
+CC_OUT		= -Fo
+LINK		= link
+LINK_OUT	= -out:
+RC		= rc
+RC_OUT		= -Fo
+RC_INCLUDE	= -i
+
+libc		= libc.lib
+baselibs	= 
+O		= obj
+A		= lib
+
+BASE_LIBS	= $(libc) $(baselibs) oldnames.lib
+
+ADVAPI32	= advapi32.lib
+COMDLG32	= comdlg32.lib
+GDI32		= gdi32.lib
+MPR		= mpr.lib
+SHELL32		= shell32.lib
+USER32		= user32.lib
+WSOCK32		= wsock32.lib
+
+!ifdef NOOPT
+DEBUG_CFLAGS	= -DEMACSDEBUG
+!else
+DEBUG_CFLAGS	= 
+!endif
+CFLAGS          = -I. -DWIN32_LEAN_AND_MEAN $(ARCH_CFLAGS) -D$(ARCH) \
+		  -D_CRTAPI1=_cdecl $(DEBUG_CFLAGS) $(USER_CFLAGS) $(LOCAL_FLAGS)
+EMACS_EXTRA_C_FLAGS =
+
+SYS_LDFLAGS	= -release -incremental:no -version:3.10 -swaprun:cd -swaprun:net
+
+# see comments in allocate_heap in w32heap.c before changing any of the
+# -stack, -heap, or -base settings.
+TEMACS_EXTRA_LINK = -stack:0x00800000 -heap:0x00100000 -base:0x01000000 -debug:full -debugtype:both -pdb:$(BLD)\temacs.pdb -machine:$(ARCH) $(SUBSYSTEM_CONSOLE) -entry:_start -map:$(BLD)\temacs.map $(EXTRA_LINK)
+
+!ifdef NOOPT
+OBJDIR          = obj
+!else
+OBJDIR          = obj-spd
+!endif
+$(OBJDIR):;	-mkdir $(OBJDIR)
+BLD             = $(OBJDIR)/$(ARCH)
+$(BLD):         $(OBJDIR)
+		-mkdir "$(BLD)"
+
+CP		= cp -f
+CP_DIR		= cp -rf
+IFNOTSAMEDIR	= if not exist ..\same-dir.tst
+ENDIF		=
+FOREACH		= for %%f in (
+FORVAR		= %%f
+FORDO		= ) do
+ENDFOR		=
+ARGQUOTE	= "
+DQUOTE		= \"
+DEL		= rm
+DEL_TREE	= rm -r
+
+# The location of the icon file
+EMACS_ICON_PATH = ../nt/emacs.ico
+
+!ifdef NODEBUG
+DEBUG_FLAG = 
+!else
+DEBUG_FLAG = -Zi
+!endif
+
+!if "$(ARCH)" == "i386"
+!ifdef NOOPT
+ARCH_CFLAGS     = -nologo -D_X86_=1 -c -Zel -W2 -H63 -Od -G3d -Zp8 $(DEBUG_FLAG)
+!else
+ARCH_CFLAGS     = -nologo -D_X86_=1 -c -Zel -W2 -H63 -Oxsb2 -Oy- -G6dF -Zp8 $(DEBUG_FLAG)
+!endif
+ARCH_LDFLAGS	= $(SYS_LDFLAGS)
+
+!else
+!if "$(ARCH)" == "mips"
+ARCH_CFLAGS     = -D_MIPS_=1 -c -W2 -Zi -Od -Gt0
+ARCH_LDFLAGS	= $(SYS_LDFLAGS)
+
+!else
+!if "$(ARCH)" == "alpha"
+!if "$(BUILD_TYPE)" == "spd"
+ARCH_CFLAGS     = -D_ALPHA_=1 -c -Ze -Zi -W2 -Od -D__stdcall= -D__cdecl=
+!else
+ARCH_CFLAGS     = -D_ALPHA_=1 -c -Ze -Zi -W2 -O1 -D__stdcall= -D__cdecl=
+!endif
+ARCH_LDFLAGS	= $(SYS_LDFLAGS)
+
+!else
+!if "$(ARCH)" == "ppc"
+# These flags are a guess...if they don't work, please send me mail.
+ARCH_CFLAGS	= -D_PPC_=1 -c -Ze -Zi -W2 -Od
+ARCH_LDFLAGS	= $(SYS_LDFLAGS)
+
+!else
+!ERROR Unknown architecture type "$(ARCH)".
+!endif
+!endif
+!endif
+!endif
+
+LINK_FLAGS	= $(ARCH_LDFLAGS) $(USER_LDFLAGS)
+
+# From MSVC 5.0 onwards, it seem base relocation information is not included,
+# at least in release builds.  We need to ensure the reloc info is included
+# in order to use the MSVC profiler.
+!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)")
+EXTRA_LINK      =
+!ELSE
+EXTRA_LINK      = -profile
+!ENDIF
+
+#
+# If the compiler supports compiling multiple .c files to .o files at
+# one time, use this feature.
+#
+!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)")
+.c{$(BLD)}.obj:
+		$(CC) $(CFLAGS) -Fo$(BLD)\ $<
+!ELSE
+.c{$(BLD)}.obj::
+		$(CC) $(CFLAGS) -Fo$(BLD)\ $<
+!ENDIF