changeset 110959:88da5c66a589

More make-dist simplification. * make-dist: Remove --compress. Check for the appropriate gzip-like executable, and if not found, don't compress. Check version number in README, don't change it. Use find for nt/inc/*.h.

--- a/ChangeLog	Wed Oct 13 02:19:11 2010 +0000
+++ b/ChangeLog	Tue Oct 12 20:08:45 2010 -0700
@@ -1,3 +1,10 @@
[phone]  Glenn Morris  <[e-mail]>
+
+	* make-dist: Remove --compress.  Check for the appropriate
+	gzip-like executable, and if not found, don't compress.
+	Check version number in README, don't change it.
+	Use find for nt/inc/*.h.
+
 2010-10-12  Dan Nicolaescu  <[e-mail]>
 
 	* configure (ns_appdir, OLDXMENU, TOOLTIP_SUPPORT): Remove

--- a/make-dist	Wed Oct 13 02:19:11 2010 +0000
+++ b/make-dist	Tue Oct 12 20:08:45 2010 -0700
@@ -49,6 +49,7 @@
 check=yes
 clean_up=no
 make_tar=no
+default_gzip=gzip
 newer=""
 
 while [ $# -gt 0 ]; do
@@ -78,12 +79,7 @@
       new_extension=".new"
       shift
     ;;
-    ## This option tells make-dist to use `compress' instead of gzip.
-    ## Normally, make-dist uses gzip whenever it is present.
-    "--compress")
-      default_gzip="compress"
-    ;;
-    ## Same with bzip2.
+    ## This option tells make-dist to use `bzip2' instead of gzip.
     "--bzip2")
       default_gzip="bzip2"
     ;;
@@ -104,7 +100,6 @@
       echo ""
       echo "  --bzip2	use bzip2 instead of gzip"
       echo "  --clean-up	delete staging directories when done"
-      echo "  --compress	use compress instead of gzip"
       echo "  --lzma	use lzma instead of gzip"
       echo "  --newer=TIME	don't include files older than TIME"
       echo "  --no-check	don't check for bad file names etc."
@@ -161,12 +156,11 @@
 
 echo Version number is $version
 
-if [ $update = yes ];
-then
-  if grep -s "@set EMACSVER  *${version}" ./doc/emacs/emacsver.texi > /dev/null; then
-    true
-  else
-    echo "You must update the version number in \`./doc/emacs/emacsver.texi'"
+if [ $update = yes ]; then
+  if ! grep -q "@set EMACSVER  *${version}" doc/emacs/emacsver.texi || \
+     ! grep -q "tree holds version  *${version}" README; then
+    echo "WARNING: README and/or emacsver.texi have the wrong version number"
+    echo "Consider running M-x set-version from admin/admin.el"
     sleep 5
   fi
 fi
@@ -312,17 +306,6 @@
 ln config.bat make-dist update-subdirs vpath.sed .dir-locals.el ${tempdir}
 ln mkinstalldirs config.sub config.guess install-sh ${tempdir}
 
-## FIXME why do we bother doing this? set-version in admin/admin.el
-## does this, and more besides.
-echo "Updating version number in README"
-(cd ${tempdir}
- awk \
-   '$1 " " $2 " " $3 " " $4 " " $5 == "This directory tree holds version" { $6 = version; print $0 }
-    $1 " " $2 " " $3 " " $4 " " $5 != "This directory tree holds version"' \
-   version=${version} README > tmp.README
- mv -f tmp.README README)
-
-
 echo "Creating subdirectories"
 for subdir in site-lisp \
 	      leim leim/CXTERM-DIC leim/MISC-DIC \
@@ -417,28 +400,18 @@
 (cd m4
  ln *.m4 ../${tempdir}/m4)
 
+## Exclude README.W32 because it is specific to pre-built binaries(?).
 echo "Making links to \`nt'"
 (cd nt
  ln emacs.manifest emacs.rc emacsclient.rc config.nt ../${tempdir}/nt
  ln emacs-src.tags nmake.defs gmake.defs subdirs.el ../${tempdir}/nt
  ln [a-z]*.bat [a-z]*.[ch] ../${tempdir}/nt
- ln ChangeLog INSTALL README README.W32 makefile.w32-in ../${tempdir}/nt)
-
-echo "Making links to \`nt/inc'"
-(cd nt/inc
- ln [a-z]*.h ../../${tempdir}/nt/inc)
+ ln ChangeLog INSTALL README makefile.w32-in ../${tempdir}/nt)
 
-echo "Making links to \`nt/inc/sys'"
-(cd nt/inc/sys
- ln [a-z]*.h ../../../${tempdir}/nt/inc/sys)
-
-echo "Making links to \`nt/inc/arpa'"
-(cd nt/inc/arpa
- ln [a-z]*.h ../../../${tempdir}/nt/inc/arpa)
-
-echo "Making links to \`nt/inc/netinet'"
-(cd nt/inc/netinet
- ln [a-z]*.h ../../../${tempdir}/nt/inc/netinet)
+echo "Making links to \`nt/inc' and its subdirectories"
+for f in `find nt/inc -type f -name '[a-z]*.h'`; do
+  ln $f $tempdir/$f
+done
 
 echo "Making links to \`nt/icons'"
 (cd nt/icons
@@ -493,8 +466,7 @@
 done
 
 echo "Making links to \`info'"
-(cd info
- ln `find . -type f -print` ../${tempdir}/info)
+ln `find info -type f -print` ${tempdir}/info
 
 echo "Making links to \`doc/emacs'"
 (cd doc/emacs
@@ -542,24 +514,23 @@
 find ${tempparent} \( -name '*~' -o -name '#*#' -o -name '.*ignore' -o -name '=*' -o -name 'TAGS' \) -exec rm -f {} \;
 
 if [ "${make_tar}" = yes ]; then
-  if [ "${default_gzip}" = "" ]; then
-    echo "Looking for gzip"
-    temppath=`echo $PATH | sed 's/^:/.:/
-				s/::/:.:/g
-				s/:$/:./
-				s/:/ /g'`
-    default_gzip=`(
-      for dir in ${temppath}; do
-	if [ -f ${dir}/gzip ]; then echo 'gzip --best'; exit 0; fi
-      done
-      echo compress
-    )`
+  echo "Looking for $default_gzip"
+  found=0
+  temppath=`echo $PATH | sed -e 's/^:/.:/' -e 's/::/:.:/g' -e 's/:$/:./' \
+     -e 's/:/ /g'`
+  for dir in ${temppath}; do
+    [ -x ${dir}/$default_gzip ] || continue
+    found=1; break
+  done
+  if [ "$found" = "0" ]; then
+    echo "WARNING: \`$default_gzip' not found, will not compress" >&2
+    default_gzip=cat
   fi
   case "${default_gzip}" in
-    bzip2)      gzip_extension=.bz2 ;;
-    compress* ) gzip_extension=.Z ;;
-    lzma)       gzip_extension=.lzma ;;
-    * )         gzip_extension=.gz ;;
+    bzip2) gzip_extension=.bz2 ;;
+    lzma)  gzip_extension=.lzma ;;
+    gzip)  gzip_extension=.gz ; default_gzip="gzip --best";;
+       *)  gzip_extension= ;;
   esac
   echo "Creating tar file"
   (cd ${tempparent} ; tar cvf - ${emacsname} ) \