changeset 108375:973b5bc5fcfe

Merge from emacs-23

--- a/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,9 +1,21 @@
[phone]  Štěpán Němec  <[e-mail]>  (tiny change)
+
+	* INSTALL: Fix typos.
+
[phone]  Chong Yidong  <[e-mail]>
+
+	* configure.in: Add check for buggy version of GCC (Bug#6031).
+
 2010-05-08  Glenn Morris  <[e-mail]>
 
 	* configure.in (HAVE_LIBNCURSES): New local variable.
 	(TERMINFO, LIBS_TERMCAP, TERMCAP_OBJ): New output variables,
 	replacing cpp in src/s/*.h and src/Makefile.in.
 
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-07  Stefan Monnier  <[e-mail]>
 
 	* configure.in: Add tests for `isnan' and `copysign'.

--- a/INSTALL	Sat May 08 11:42:56 2010 -0700
+++ b/INSTALL	Sat May 08 14:47:07 2010 -0400
@@ -408,7 +408,7 @@
 switch to the compiler, and link against libfoo.a and libbar.a
 libraries in addition to the standard ones.
 
-For some libraries, like Gtk+, fontconfig and ALSA, `configure' use
+For some libraries, like Gtk+, fontconfig and ALSA, `configure' uses
 pkg-config to find where those libraries are installed.
 If you want pkg-config to look in special directories, you have to set
 the environment variable PKG_CONFIG_PATH to point to the directories
@@ -466,7 +466,7 @@
 documentation strings to be in the etc/DOC file (see
 src/Makefile.in if you wish to figure out how to do that).  For all
 else, use site-init.el.  Do not load byte-compiled code which
-was build with a non-nil value of `byte-compile-dynamic'.
+was built with a non-nil value of `byte-compile-dynamic'.
 
 If you set load-path to a different value in site-init.el or
 site-load.el, Emacs will use *precisely* that value when it starts up
@@ -491,7 +491,7 @@
 copying it, if you wish; then it automatically uses the sibling
 directories ../lisp, ../lib-src, ../info.
 
-Or you can "install" the executable and the other Emacs into their
+Or you can "install" the executable and the other files into their
 installed locations, with `make install'.  By default, Emacs's files
 are installed in the following directories:
 

--- a/admin/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/admin/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-04-01  Eli Zaretskii  <[e-mail]>
 
 	* CPP-DEFINES (__DJGPP__, __GO32__): Remove, no longer used.

--- a/configure	Sat May 08 11:42:56 2010 -0700
+++ b/configure	Sat May 08 14:47:07 2010 -0400
@@ -26209,6 +26209,16 @@
 CFLAGS="$REAL_CFLAGS"
 CPPFLAGS="$REAL_CPPFLAGS"
 
+## Hack to detect a buggy GCC version.
+if test "x$GCC" = xyes \
+   && test x"`$CC --version 2> /dev/null | grep 'gcc.* 4.5.0'`" != x \
+   && test x"`echo $CFLAGS | grep '\-O[23]'`" != x \
+   && test x"`echo $CFLAGS | grep '\-fno-optimize-sibling-calls'`" = x; then
+   { { $as_echo "$as_me:$LINENO: error: GCC 4.5.0 has problems compiling Emacs; see etc/PROBLEMS'." >&5
+$as_echo "$as_me: error: GCC 4.5.0 has problems compiling Emacs; see etc/PROBLEMS'." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
 #### Find out which version of Emacs this is.
 version=`grep 'defconst[	 ]*emacs-version' ${srcdir}/lisp/version.el \
 	 | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`

--- a/configure.in	Sat May 08 11:42:56 2010 -0700
+++ b/configure.in	Sat May 08 14:47:07 2010 -0400
@@ -2923,6 +2923,14 @@
 CFLAGS="$REAL_CFLAGS"
 CPPFLAGS="$REAL_CPPFLAGS"
 
+## Hack to detect a buggy GCC version.
+if test "x$GCC" = xyes \
+   && test x"`$CC --version 2> /dev/null | grep 'gcc.* 4.5.0'`" != x \
+   && test x"`echo $CFLAGS | grep '\-O@<:@23@:>@'`" != x \
+   && test x"`echo $CFLAGS | grep '\-fno-optimize-sibling-calls'`" = x; then
+   AC_MSG_ERROR([GCC 4.5.0 has problems compiling Emacs; see etc/PROBLEMS'.])
+fi
+
 #### Find out which version of Emacs this is.
 [version=`grep 'defconst[	 ]*emacs-version' ${srcdir}/lisp/version.el \
 	 | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`]

--- a/doc/emacs/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/doc/emacs/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,28 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* building.texi (GDB Graphical Interface): Remove misleading comparison
+	to an IDE (Bug#6128).
+
[phone]  Štěpán Němec  <[e-mail]>  (tiny change)
+
+	* programs.texi (Man Page):
+	* misc.texi (Invoking emacsclient):
+	* mini.texi (Repetition):
+	* mark.texi (Setting Mark): Fix typos.
+
[phone]  Chong Yidong  <[e-mail]>
+
+	* misc.texi (Printing): Document htmlfontify-buffer.
+
[phone]  Glenn Morris  <[e-mail]>
+
+	* calendar.texi (Displaying the Diary, Format of Diary File):
+	Fix external cross-references for TeX format output.
+
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-02  Jan Djärv  <[e-mail]>
 
 	* cmdargs.texi (Initial Options): Mention --chdir.

--- a/doc/emacs/building.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/emacs/building.texi	Sat May 08 14:47:07 2010 -0400
@@ -836,12 +836,11 @@
 @subsection GDB Graphical Interface
 
   The command @code{gdb} starts GDB in a graphical interface, using
-Emacs windows for display program state information.  In effect, this
-makes Emacs into an IDE (interactive development environment).  With
-it, you do not need to use textual GDB commands; you can control the
-debugging session with the mouse.  For example, you can click in the
-fringe of a source buffer to set a breakpoint there, or on a stack
-frame in the stack buffer to select that frame.
+Emacs windows for display program state information.  With it, you do
+not need to use textual GDB commands; you can control the debugging
+session with the mouse.  For example, you can click in the fringe of a
+source buffer to set a breakpoint there, or on a stack frame in the
+stack buffer to select that frame.
 
   This mode requires telling GDB that its ``screen size'' is
 unlimited, so it sets the height and width accordingly.  For correct

--- a/doc/emacs/calendar.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/emacs/calendar.texi	Sat May 08 14:47:07 2010 -0400
@@ -1082,7 +1082,7 @@
 shown either in the buffer or in the mode line, depending on the display
 method you choose
 @iftex
-(@pxref{Diary Display,, emacs-xtra}).
+(@pxref{Diary Display,,, emacs-xtra, Specialized Emacs Features}).
 @end iftex
 @ifnottex
 (@pxref{Diary Display}).
@@ -1186,7 +1186,7 @@
 This entry will have a different appearance if you use the simple diary
 display
 @iftex
-(@pxref{Diary Display,, emacs-xtra}).
+(@pxref{Diary Display,,, emacs-xtra, Specialized Emacs Features}).
 @end iftex
 @ifnottex
 (@pxref{Diary Display}).

--- a/doc/emacs/mark.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/emacs/mark.texi	Sat May 08 14:47:07 2010 -0400
@@ -80,7 +80,7 @@
 character in @acronym{ASCII}; usually, typing @kbd{C-@key{SPC}} on a
 text terminal gives the character @kbd{C-@@}.  This key is also bound
 to @code{set-mark-command}, so unless you are unlucky enough to have
-an text terminal that behaves differently, you might as well think of
+a text terminal that behaves differently, you might as well think of
 @kbd{C-@@} as @kbd{C-@key{SPC}}.}.  This sets the mark where point is,
 and activates it.  You can then move point away, leaving the mark
 behind.

--- a/doc/emacs/mini.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/emacs/mini.texi	Sat May 08 14:47:07 2010 -0400
@@ -601,7 +601,7 @@
 unchanged.  You can also change the command by editing the Lisp
 expression before you execute it.  The repeated command is added to
 the front of the command history unless it is identical to the most
-recently item.
+recent item.
 
   Once inside the minibuffer for @kbd{C-x @key{ESC} @key{ESC}}, you can
 use the minibuffer history commands (@kbd{M-p}, @kbd{M-n}, @kbd{M-r},

--- a/doc/emacs/misc.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/emacs/misc.texi	Sat May 08 14:47:07 2010 -0400
@@ -1528,7 +1528,7 @@
 @kbd{C-x #} (@code{server-edit}) in its buffer.  This saves the file
 and sends a message back to the @command{emacsclient} program, telling
 it to exit.  Programs that use @env{EDITOR} usually wait for the
-``editor''---in the case @command{emacsclient}---to exit before doing
+``editor''---in this case @command{emacsclient}---to exit before doing
 something else.
 
   You can also call @command{emacsclient} with multiple file name
@@ -1701,8 +1701,14 @@
   Emacs provides commands for printing hard copies of either an entire
 buffer or just part of one, with or without page headers.  You can
 invoke the printing commands directly, as detailed in the following
-section, or using the @samp{File} menu on the menu bar.  See also the
-hardcopy commands of Dired (@pxref{Misc File Ops}) and the diary
+section, or using the @samp{File} menu on the menu bar.
+
+@findex htmlfontify-buffer
+  Aside from the commands described in this section, you can also
+``print'' an Emacs buffer to HTML with @kbd{M-x htmlfontify-buffer}.
+This command converts the current buffer to a HTML file, replacing
+Emacs faces with CSS-based markup.  In addition, see the hardcopy
+commands of Dired (@pxref{Misc File Ops}) and the diary
 (@pxref{Displaying the Diary}).
 
 @table @kbd

--- a/doc/emacs/programs.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/emacs/programs.texi	Sat May 08 14:47:07 2010 -0400
@@ -1202,7 +1202,7 @@
 your machine; the list of available manual pages is computed
 automatically the first time you invoke @code{woman}.  The word at
 point in the current buffer is used to suggest the default for the
-name the manual page.
+name of the manual page.
 
   With a numeric argument, @kbd{M-x woman} recomputes the list of the
 manual pages used for completion.  This is useful if you add or delete

--- a/doc/lispintro/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispintro/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-03-10  Chong Yidong  <[e-mail]>
 
 	* Branch for 23.2.
@@ -13,8 +17,7 @@
 
 2009-12-09  David Robinow  <[e-mail]>  (tiny change)
 
-	* makefile.w32-in: Use parenthesis for macros for nmake
-	compatibility.
+	* makefile.w32-in: Use parenthesis for macros for nmake compatibility.
 
 2009-12-03  Glenn Morris  <[e-mail]>
 
@@ -72,7 +75,7 @@
 
 2009-02-22  Karl Berry  <[e-mail]>
 
-	* emacs-lisp-intro.texi (Default Configuration): fix dup word "by by".
+	* emacs-lisp-intro.texi (Default Configuration): Fix dup word "by by".
 
 2009-02-20  Juanma Barranquero  <[e-mail]>
 

--- a/doc/lispref/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,8 +1,37 @@
[phone]  Štěpán Němec  <[e-mail]>  (tiny change)
+
+	* windows.texi (Textual Scrolling):
+	* tips.texi (Coding Conventions):
+	* minibuf.texi (Minibuffer History):
+	* maps.texi (Standard Keymaps):
+	* loading.texi (Where Defined):
+	* edebug.texi (Instrumenting): Fix typos.
+
[phone]  Chong Yidong  <[e-mail]>
+
+	* keymaps.texi (Menu Bar): Document :advertised-binding property.
+
+	* functions.texi (Obsolete Functions):
+	Document set-advertised-calling-convention.
+
+	* minibuf.texi (Basic Completion): Document completion-in-region.
+	(Programmed Completion): Document completion-annotate-function.
+
+	* commands.texi (Reading One Event): Document read-key.
+	(Distinguish Interactive): Document KIND arg to
+	called-interactively-p.  Delete obsolete interactive-p.
+
+	* elisp.texi (Top): Update node description.
+
 2010-05-08  Eli Zaretskii  <[e-mail]>
 
-	* nonascii.texi (Character Properties): Document
-	unicode-category-table.  Add an index entry for Unicode general
-	category.
+	* nonascii.texi (Character Properties):
+	Document unicode-category-table.  Add an index entry for Unicode
+	general category.
+
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
 
 2010-04-20  Juanma Barranquero  <[e-mail]>
 

--- a/doc/lispref/commands.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/commands.texi	Sat May 08 14:47:07 2010 -0400
@@ -696,71 +696,67 @@
 because it allows callers to say ``treat this call as interactive.''
 But you can also do the job by testing @code{called-interactively-p}.
 
-@defun called-interactively-p
+@defun called-interactively-p kind
 This function returns @code{t} when the calling function was called
 using @code{call-interactively}.
 
-If the containing function was called by Lisp evaluation (or with
-@code{apply} or @code{funcall}), then it was not called interactively.
+The argument @var{kind} should be either the symbol @code{interactive}
+or the symbol @code{any}.  If it is @code{interactive}, then
+@code{called-interactively-p} returns @code{t} only if the call was
+made directly by the user---e.g., if the user typed a key sequence
+bound to the calling function, but @emph{not} if the user ran a
+keyboard macro that called the function (@pxref{Keyboard Macros}).  If
+@var{kind} is @code{any}, @code{called-interactively-p} returns
+@code{t} for any kind of interactive call, including keyboard macros.
+
+If in doubt, use @code{any}; the only known proper use of
+@code{interactive} is if you need to decide whether to display a
+helpful message while a function is running.
+
+A function is never considered to be called interactively if it was
+called via Lisp evaluation (or with @code{apply} or @code{funcall}).
 @end defun
 
-   Here's an example of using @code{called-interactively-p}:
+@noindent
+Here is an example of using @code{called-interactively-p}:
 
 @example
 @group
 (defun foo ()
   (interactive)
-  (when (called-interactively-p)
-    (message "foo"))
-  'haha)
-     @result{} foo
+  (when (called-interactively-p 'any)
+    (message "Interactive!")
+    'foo-called-interactively))
 @end group
 
 @group
 ;; @r{Type @kbd{M-x foo}.}
-     @print{} foo
+     @print{} Interactive!
 @end group
 
 @group
 (foo)
-     @result{} haha
+     @result{} nil
 @end group
 @end example
 
-  Here is another example that contrasts direct and indirect
-calls to @code{called-interactively-p}.
+@noindent
+Here is another example that contrasts direct and indirect calls to
+@code{called-interactively-p}.
 
 @example
 @group
 (defun bar ()
   (interactive)
-  (setq foobar (list (foo) (called-interactively-p))))
-     @result{} bar
+  (message "%s" (list (foo) (called-interactively-p 'any))))
 @end group
 
 @group
 ;; @r{Type @kbd{M-x bar}.}
-;; @r{This does not display a message.}
-@end group
-
-@group
-foobar
-     @result{} (nil t)
+     @print{} (nil t)
 @end group
 @end example
 
-  If you want to treat commands run in keyboard macros just like calls
-from Lisp programs, test @code{interactive-p} instead of
-@code{called-interactively-p}.
-
-@defun interactive-p
-This function returns @code{t} if the containing function (the one
-whose code includes the call to @code{interactive-p}) was called in
-direct response to user input.  This means that it was called with the
-function @code{call-interactively}, and that a keyboard macro is
-not running, and that Emacs is not running in batch mode.
-@end defun
-
 @node Command Loop Info
 @comment  node-name,  next,  previous,  up
 @section Information from the Command Loop
@@ -2309,10 +2305,8 @@
 @cindex reading a single event
 @cindex event, reading only one
 
-  The lowest level functions for command input are those that read a
-single event.
-
-None of the three functions below suppresses quitting.
+  The lowest level functions for command input are @code{read-event},
+@code{read-char}, and @code{read-char-exclusive}.
 
 @defun read-event &optional prompt inherit-input-method seconds
 This function reads and returns the next event of command input, waiting
@@ -2409,11 +2403,31 @@
 gets a character.  The arguments work as in @code{read-event}.
 @end defun
 
+  None of the above functions suppress quitting.
+
 @defvar num-nonmacro-input-events
 This variable holds the total number of input events received so far
 from the terminal---not counting those generated by keyboard macros.
 @end defvar
 
+  We emphasize that, unlike @code{read-key-sequence}, the functions
+@code{read-event}, @code{read-char}, and @code{read-char-exclusive} do
+not perform the translations described in @ref{Translation Keymaps}.
+If you wish to read a single key taking these translations into
+account, use the function @code{read-key}:
+
+@defun read-key &optional prompt
+This function reads a single key.  It is ``intermediate'' between
+@code{read-key-sequence} and @code{read-event}.  Unlike the former, it
+reads a single key, not a key sequence.  Unlike the latter, it does
+not return a raw event, but decodes and translates the user input
+according to @code{input-decode-map}, @code{local-function-key-map},
+and @code{key-translation-map} (@pxref{Translation Keymaps}).
+
+The argument @var{prompt} is either a string to be displayed in the
+echo area as a prompt, or @code{nil}, meaning not to display a prompt.
+@end defun
+
 @node Event Mod
 @subsection Modifying and Translating Input Events
 

--- a/doc/lispref/edebug.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/edebug.texi	Sat May 08 14:47:07 2010 -0400
@@ -186,7 +186,7 @@
 
   While Edebug is active, the command @kbd{I}
 (@code{edebug-instrument-callee}) instruments the definition of the
-function or macro called by the list form after point, if is not already
+function or macro called by the list form after point, if it is not already
 instrumented.  This is possible only if Edebug knows where to find the
 source for that function; for this reason, after loading Edebug,
 @code{eval-region} records the position of every definition it

--- a/doc/lispref/elisp.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/elisp.texi	Sat May 08 14:47:07 2010 -0400
@@ -649,7 +649,6 @@
 Completion
 
 * Basic Completion::        Low-level functions for completing strings.
-                              (These are too low level to use the minibuffer.)
 * Minibuffer Completion::   Invoking the minibuffer with completion.
 * Completion Commands::     Minibuffer commands that do completion.
 * High-Level Completion::   Convenient special cases of completion

--- a/doc/lispref/functions.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/functions.texi	Sat May 08 14:47:07 2010 -0400
@@ -1197,7 +1197,7 @@
 @end defun
 
 You can define a function as an alias and declare it obsolete at the
-same time using the macro @code{define-obsolete-function-alias}.
+same time using the macro @code{define-obsolete-function-alias}:
 
 @defmac define-obsolete-function-alias obsolete-name current-name &optional when docstring
 This macro marks the function @var{obsolete-name} obsolete and also
@@ -1210,6 +1210,33 @@
 @end example
 @end defmac
 
+In addition, you can mark a certain a particular calling convention
+for a function as obsolete:
+
+@defun set-advertised-calling-convention function signature
+This function specifies the argument list @var{signature} as the
+correct way to call @var{function}.  This causes the Emacs byte
+compiler to issue a warning whenever it comes across an Emacs Lisp
+program that calls @var{function} any other way (however, it will
+still allow the code to be byte compiled).
+
+For instance, in old versions of Emacs the @code{sit-for} function
+accepted three arguments, like this
+
+@smallexample
+  (sit-for seconds milliseconds nodisp)
+@end smallexample
+
+However, calling @code{sit-for} this way is considered obsolete
+(@pxref{Waiting}).  The old calling convention is deprecated like
+this:
+
+@smallexample
+(set-advertised-calling-convention
+  'sit-for '(seconds &optional nodisp))
+@end smallexample
+@end defun
+
 @node Inline Functions
 @section Inline Functions
 @cindex inline functions

--- a/doc/lispref/keymaps.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/keymaps.texi	Sat May 08 14:47:07 2010 -0400
@@ -2470,9 +2470,13 @@
 @cindex menu bar
 
   Most window systems allow each frame to have a @dfn{menu bar}---a
-permanently displayed menu stretching horizontally across the top of the
-frame.  The items of the menu bar are the subcommands of the fake
-``function key'' @code{menu-bar}, as defined in the active keymaps.
+permanently displayed menu stretching horizontally across the top of
+the frame.  (In order for a frame to display a menu bar, its
+@code{menu-bar-lines} parameter must be greater than zero.
+@xref{Layout Parameters}.)
+
+  The items of the menu bar are the subcommands of the fake ``function
+key'' @code{menu-bar}, as defined in the active keymaps.
 
   To add an item to the menu bar, invent a fake ``function key'' of your
 own (let's call it @var{key}), and make a binding for the key sequence
@@ -2490,13 +2494,6 @@
 from the keymaps that would be active if @code{overriding-local-map}
 were @code{nil}.  @xref{Active Keymaps}.
 
-  In order for a frame to display a menu bar, its @code{menu-bar-lines}
-parameter must be greater than zero.  Emacs uses just one line for the
-menu bar itself; if you specify more than one line, the other lines
-serve to separate the menu bar from the windows in the frame.  We
-recommend 1 or 2 as the value of @code{menu-bar-lines}.  @xref{Layout
-Parameters}.
-
   Here's an example of setting up a menu bar item:
 
 @example
@@ -2535,8 +2532,8 @@
 @end example
 
 @noindent
-@code{edit} is the fake function key used by the global map for the
-@samp{Edit} menu bar item.  The main reason to suppress a global
+Here, @code{edit} is the fake function key used by the global map for
+the @samp{Edit} menu bar item.  The main reason to suppress a global
 menu bar item is to regain space for mode-specific items.
 
 @defvar menu-bar-final-items
@@ -2557,6 +2554,23 @@
 in the usual case.
 @end defvar
 
+Next to every menu bar item, Emacs displays a key binding that runs
+the same command (if such a key binding exists).  This serves as a
+convenient hint for users who do not know the key binding.  If a
+command has multiple bindings, Emacs normally displays the first one
+it finds.  You can specify one particular key binding by assigning an
+@code{:advertised-binding} symbol property to the command.  For
+instance, the following tells Emacs to show @kbd{C-/} for the
+@code{undo} menu item:
+
+@smallexample
+(put 'undo :advertised-binding [?\C-/])
+@end smallexample
+
+@noindent
+If the @code{:advertised-binding} property specifies a key binding
+that the command does not actually have, it is ignored.
+
 @node Tool Bar
 @subsection Tool bars
 @cindex tool bar

--- a/doc/lispref/loading.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/loading.texi	Sat May 08 14:47:07 2010 -0400
@@ -823,7 +823,7 @@
 @code{load-history}.
 
 @defvar load-history
-This value of this variable is an alist that associates the names of
+The value of this variable is an alist that associates the names of
 loaded library files with the names of the functions and variables
 they defined, as well as the features they provided or required.
 

--- a/doc/lispref/locals.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/locals.texi	Sat May 08 14:47:07 2010 -0400
@@ -85,6 +85,9 @@
 @item case-fold-search
 @xref{Searching and Case}.
 
+@item comment-column
+@xref{Comments,,, emacs, The GNU Emacs Manual}.
+
 @item ctl-arrow
 @xref{Usual Display}.
 
@@ -94,9 +97,6 @@
 @item cursor-type
 @xref{Cursor Parameters}.
 
-@item comment-column
-@xref{Comments,,, emacs, The GNU Emacs Manual}.
-
 @item default-directory
 @xref{File Name Expansion}.
 

--- a/doc/lispref/maps.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/maps.texi	Sat May 08 14:47:07 2010 -0400
@@ -163,7 +163,7 @@
 
 @item key-translation-map
 A keymap for translating keys.  This one overrides ordinary key
-bindings, unlike @code{local- function-key-map}.  @xref{Translation
+bindings, unlike @code{local-function-key-map}.  @xref{Translation
 Keymaps}.
 
 @item kmacro-map

--- a/doc/lispref/minibuf.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/minibuf.texi	Sat May 08 14:47:07 2010 -0400
@@ -511,7 +511,7 @@
 @defopt history-length
 The value of this variable specifies the maximum length for all
 history lists that don't specify their own maximum lengths.  If the
-value is @code{t}, that means there no maximum (don't delete old
+value is @code{t}, that means there is no maximum (don't delete old
 elements).  The value of @code{history-length} property of the history
 list variable's symbol, if set, overrides this variable for that
 particular history list.
@@ -626,7 +626,6 @@
 
 @menu
 * Basic Completion::       Low-level functions for completing strings.
-                             (These are too low level to use the minibuffer.)
 * Minibuffer Completion::  Invoking the minibuffer with completion.
 * Completion Commands::    Minibuffer commands that do completion.
 * High-Level Completion::  Convenient special cases of completion
@@ -640,31 +639,23 @@
 @node Basic Completion
 @subsection Basic Completion Functions
 
-  The completion functions @code{try-completion},
-@code{all-completions} and @code{test-completion} have nothing in
-themselves to do with minibuffers.  We describe them in this chapter
-so as to keep them near the higher-level completion features that do
-use the minibuffer.
-
-  If you store a completion alist in a variable, you should mark the
-variable as ``risky'' with a non-@code{nil}
-@code{risky-local-variable} property.
+  The following completion functions have nothing in themselves to do
+with minibuffers.  We describe them here to keep them near the
+higher-level completion features that do use the minibuffer.
 
 @defun try-completion string collection &optional predicate
 This function returns the longest common substring of all possible
 completions of @var{string} in @var{collection}.  The value of
 @var{collection} must be a list of strings or symbols, an alist, an
-obarray, a hash table, or a function that implements a virtual set of
-strings (see below).
+obarray, a hash table, or a completion function (@pxref{Programmed
+Completion}).
 
 Completion compares @var{string} against each of the permissible
-completions specified by @var{collection}; if the beginning of the
-permissible completion equals @var{string}, it matches.  If no permissible
-completions match, @code{try-completion} returns @code{nil}.  If only
-one permissible completion matches, and the match is exact, then
-@code{try-completion} returns @code{t}.  Otherwise, the value is the
-longest initial sequence common to all the permissible completions that
-match.
+completions specified by @var{collection}.  If no permissible
+completions match, @code{try-completion} returns @code{nil}.  If there
+is just one matching completion, and the match is exact, it returns
+@code{t}.  Otherwise, it returns the longest initial sequence common
+to all possible matching completions.
 
 If @var{collection} is an alist (@pxref{Association Lists}), the
 permissible completions are the elements of the alist that are either
@@ -688,13 +679,13 @@
 If @var{collection} is a hash table, then the keys that are strings
 are the possible completions.  Other keys are ignored.
 
-You can also use a symbol that is a function as @var{collection}.  Then
-the function is solely responsible for performing completion;
+You can also use a symbol that is a function as @var{collection}.
+Then the function is solely responsible for performing completion;
 @code{try-completion} returns whatever this function returns.  The
 function is called with three arguments: @var{string}, @var{predicate}
-and @code{nil}.  (The reason for the third argument is so that the same
+and @code{nil} (the reason for the third argument is so that the same
 function can be used in @code{all-completions} and do the appropriate
-thing in either case.)  @xref{Programmed Completion}.
+thing in either case).  @xref{Programmed Completion}.
 
 If the argument @var{predicate} is non-@code{nil}, then it must be a
 function of one argument, unless @var{collection} is a hash table, in
@@ -823,6 +814,10 @@
 it returns, @code{test-completion} returns in turn.
 @end defun
 
+If you store a completion alist in a variable, you should mark the
+variable as ``risky'' with a non-@code{nil}
+@code{risky-local-variable} property.  @xref{File Local Variables}.
+
 @defvar completion-ignore-case
 If the value of this variable is non-@code{nil}, Emacs does not
 consider case significant in completion.  Note, however, that this
@@ -855,6 +850,23 @@
 @end smallexample
 @end defmac
 
+The function @code{completion-in-region} provides a convenient way to
+perform completion on an arbitrary stretch of text in an Emacs buffer:
+
+@defun completion-in-region start end collection &optional predicate
+This function completes the text in the current buffer between the
+positions @var{start} and @var{end}, using @var{collection}.  The
+argument @var{collection} has the same meaning as in
+@code{try-completion} (@pxref{Basic Completion}).
+
+This function inserts the completion text directly into the current
+buffer.  Unlike @code{completing-read} (@pxref{Minibuffer
+Completion}), it does not activate the minibuffer.
+
+For this function to work, point must be somewhere between @var{start}
+and @var{end}.
+@end defun
+
 @node Minibuffer Completion
 @subsection Completion and the Minibuffer
 @cindex minibuffer completion
@@ -869,12 +881,12 @@
 @var{prompt}, which must be a string.
 
 The actual completion is done by passing @var{collection} and
-@var{predicate} to the function @code{try-completion}.  This happens
-in certain commands bound in the local keymaps used for completion.
-Some of these commands also call @code{test-completion}.  Thus, if
-@var{predicate} is non-@code{nil}, it should be compatible with
-@var{collection} and @code{completion-ignore-case}.  @xref{Definition
-of test-completion}.
+@var{predicate} to the function @code{try-completion} (@pxref{Basic
+Completion}).  This happens in certain commands bound in the local
+keymaps used for completion.  Some of these commands also call
+@code{test-completion}.  Thus, if @var{predicate} is non-@code{nil},
+it should be compatible with @var{collection} and
+@code{completion-ignore-case}.  @xref{Definition of test-completion}.
 
 The value of the optional argument @var{require-match} determines how
 the user may exit the minibuffer:
@@ -1603,8 +1615,10 @@
 
   Sometimes it is not possible to create an alist or an obarray
 containing all the intended possible completions.  In such a case, you
-can supply your own function to compute the completion of a given string.
-This is called @dfn{programmed completion}.
+can supply your own function to compute the completion of a given
+string.  This is called @dfn{programmed completion}.  Emacs uses
+programmed completion when completing file names (@pxref{File Name
+Completion}).
 
   To use this feature, pass a symbol with a function definition as the
 @var{collection} argument to @code{completing-read}.  The function
@@ -1659,9 +1673,6 @@
 function.  So you must arrange for any function you wish to use for
 completion to be encapsulated in a symbol.
 
-  Emacs uses programmed completion when completing file names.
-@xref{File Name Completion}.
-
 @defun completion-table-dynamic function
 This function is a convenient way to write a function that can act as
 programmed completion function.  The argument @var{function} should be
@@ -1671,6 +1682,19 @@
 and the interface for programmed completion functions.
 @end defun
 
+@defvar completion-annotate-function
+The value of this variable, if non-@code{nil}, should be a function
+for ``annotating'' the entries in the @samp{*Completions*} buffer.
+The function should accept a single argument, the completion string
+for an entry.  It should return an additional string to display next
+to that entry in the @samp{*Completions*} buffer, or @code{nil} if no
+additional string is to be displayed.
+
+The function can determine the collection used for the current
+completion via the variable @code{minibuffer-completion-table}
+(@pxref{Completion Commands}).
+@end defvar
+
 @node Yes-or-No Queries
 @section Yes-or-No Queries
 @cindex asking the user questions

--- a/doc/lispref/tips.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/tips.texi	Sat May 08 14:47:07 2010 -0400
@@ -90,7 +90,7 @@
 If a file requires certain other Lisp programs to be loaded
 beforehand, then the comments at the beginning of the file should say
 so.  Also, use @code{require} to make sure they are loaded.
-x@xref{Named Features}.
+@xref{Named Features}.
 
 @item
 If a file @var{foo} uses a macro defined in another file @var{bar},

--- a/doc/lispref/windows.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/lispref/windows.texi	Sat May 08 14:47:07 2010 -0400
@@ -1661,8 +1661,8 @@
 @end defopt
 
 @defopt scroll-step
-This variable is an older variant of @code{scroll-conservatively}.  The
-difference is that it if its value is @var{n}, that permits scrolling
+This variable is an older variant of @code{scroll-conservatively}.
+The difference is that if its value is @var{n}, that permits scrolling
 only by precisely @var{n} lines, not a smaller number.  This feature
 does not work with @code{scroll-margin}.  The default value is zero.
 @end defopt

--- a/doc/man/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/doc/man/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,11 +1,15 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-03-10  Chong Yidong  <[e-mail]>
 
 	* Branch for 23.2.
 
 2010-01-09  Chong Yidong  <[e-mail]>
 
-	* emacs.1: Copyedits.  Update options -Q, -mm and --daemon.  Remove
-	deprecated --unibyte option.
+	* emacs.1: Copyedits.  Update options -Q, -mm and --daemon.
+	Remove deprecated --unibyte option.
 
 2009-06-21  Chong Yidong  <[e-mail]>
 

--- a/doc/misc/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/doc/misc/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,11 +1,28 @@
[phone]  Štěpán Němec  <[e-mail]>  (tiny change)
+
+	* url.texi (HTTP language/coding, Customization):
+	* message.texi (Header Commands, Responses):
+	* cl.texi (Argument Lists): Fix typos.
+
[phone]  Chong Yidong  <[e-mail]>
+
+	* ede.texi (EDE Mode): Refer to init file rather than `.emacs'.
+	Note that Development menu is always available.
+	(Creating a project): Fix terminology.
+	(Add/Remove files): Fix typo.
+
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-01  Daniel E. Doherty <[e-mail]> (tiny change)
 
 	* calc.texi (Tutorial): Use "^{\prime}" to indicate primes.
 
 2010-05-01  Michael Albinus  <[e-mail]>
 
-	* tramp.texi (Inline methods, Default Method): Mention
-	`tramp-inline-compress-start-size'.
+	* tramp.texi (Inline methods, Default Method):
+	Mention `tramp-inline-compress-start-size'.
 
 2010-04-18  Teodor Zlatanov  <[e-mail]>
 

--- a/doc/misc/cl.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/misc/cl.texi	Sat May 08 14:47:07 2010 -0400
@@ -356,7 +356,7 @@
 calls to it may be expanded into in-line code by the byte compiler.
 This is analogous to the @code{defsubst} form;
 @code{defsubst*} uses a different method (compiler macros) which
-works in all version of Emacs, and also generates somewhat more
+works in all versions of Emacs, and also generates somewhat more
 efficient inline expansions.  In particular, @code{defsubst*}
 arranges for the processing of keyword arguments, default values,
 etc., to be done at compile-time whenever possible.

--- a/doc/misc/ede.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/misc/ede.texi	Sat May 08 14:47:07 2010 -0400
@@ -129,27 +129,26 @@
 @node EDE Mode, Creating a project, EDE Project Concepts, top
 @chapter @ede{} Mode
 
-@ede{} is implemented as a minor-mode, which augments other modes such
+@ede{} is implemented as a minor mode, which augments other modes such
 as C mode, and Texinfo mode.  You can enable @ede{} for all buffers by
 running the command @code{global-ede-mode}, or by putting this in your
-@file{~/.emacs} file:
+init file:
 
 @example
 (global-ede-mode t)
 @end example
 
-When @ede{} is active for a given buffer, the menu item
-``Development'' appears.  This menu provides several menu items for
-high-level @ede{} commands.  These menu items, and their corresponding
-keybindings, are independent of the type of project you are actually
-working on.
+Activating @ede{} adds a menu named @samp{Development} to the menu
+bar.  This menu provides several menu items for high-level @ede{}
+commands.  These menu items, and their corresponding keybindings, are
+independent of the type of project you are actually working on.
 
 @node Creating a project, Modifying your project, EDE Mode, top
 @chapter Creating a project
 
 To create a new project, first visit a file that you want to include
-in that project.  If you have a hierarchy of directories, choose a
-file in the topmost directory first.  From this buffer, type @kbd{M-x
+in that project.  If you have a hierarchy of directories, first visit
+a file in the topmost directory.  From this buffer, type @kbd{M-x
 ede-new}, or click on the @samp{Create Project} item in the
 @samp{Development} menu.
 
@@ -220,8 +219,8 @@
 @node Add/Remove target, Add/Remove files, Modifying your project, Modifying your project
 @section Add/Remove target
 
-To create a new target, type @kbd{C-c . t} (@code{M-x ede-new-target})
-or use the @samp{Add Target} menu item in the @samp{Project Options}
+To create a new target, type @kbd{C-c . t} (@code{ede-new-target}) or
+use the @samp{Add Target} menu item in the @samp{Project Options}
 submenu.  This prompts for a target name, and adds the current buffer
 to that target.
 
@@ -237,7 +236,7 @@
 @section Add/Remove files
 
 To add the current file to an existing target, type @kbd{C-c . a}
-(@code{ede-add-file}), or or use the @samp{Add File} menu item in the
+(@code{ede-add-file}), or use the @samp{Add File} menu item in the
 @samp{Target Options} submenu.
 
 You can add a file to more than one target; this is OK.

--- a/doc/misc/message.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/misc/message.texi	Sat May 08 14:47:07 2010 -0400
@@ -659,7 +659,7 @@
 @findex message-insert-disposition-notification-to
 Insert a request for a disposition
 notification.  (@code{message-insert-disposition-notification-to}).
-This means that if the recipient support RFC 2298 she might send you a
+This means that if the recipient supports RFC 2298 she might send you a
 notification that she received the message.
 
 @item M-x message-insert-importance-high
@@ -2387,7 +2387,7 @@
 
 @item wide reply
 A @dfn{wide reply} is a mail response that includes @emph{all} entities
-mentioned in the message you are responded to.  All mailboxes from the
+mentioned in the message you are responding to.  All mailboxes from the
 following headers will be concatenated to form the outgoing
 @code{To}/@code{Cc} headers:
 

--- a/doc/misc/url.texi	Sat May 08 11:42:56 2010 -0700
+++ b/doc/misc/url.texi	Sat May 08 14:47:07 2010 -0400
@@ -313,7 +313,7 @@
 variables, the value is a string; it can specify a single choice, or
 it can be a comma-separated list.
 
-Normally this list ordered by descending preference.  However, each
+Normally, this list is ordered by descending preference.  However, each
 element can be followed by @samp{;q=@var{priority}} to specify its
 preference level, a decimal number from 0 to 1; e.g., for
 @code{url-mime-language-string}, @w{@code{"de, en-gb;q=0.8,
@@ -1120,11 +1120,11 @@
 
 @defopt url-debug
 @cindex debugging
-Specifies the types of debug messages the library which are logged to
+Specifies the types of debug messages which are logged to
 the @code{*URL-DEBUG*} buffer.
 @code{t} means log all messages.
 A number means log all messages and show them with @code{message}.
-If may also be a list of the types of messages to be logged.
+It may also be a list of the types of messages to be logged.
 @end defopt
 @defopt url-personal-mail-address
 @end defopt

--- a/etc/AUTHORS	Sat May 08 11:42:56 2010 -0700
+++ b/etc/AUTHORS	Sat May 08 14:47:07 2010 -0400
@@ -92,7 +92,7 @@
 
 Alexander Becher: changed vc-annotate.el
 
-Alexander Klimov: changed man.el
+Alexander Klimov: changed calc-graph.el man.el
 
 Alexander Kreuzer: changed nnrss.el
 
@@ -167,9 +167,9 @@
 Andreas Politz: changed editfns.c elp.el ido.el term.el
 
 Andreas Schwab: changed Makefile.in configure.in lisp.h xdisp.c files.el
-  coding.c alloc.c process.c print.c editfns.c fileio.c fns.c dired.el
+  coding.c alloc.c process.c fileio.c print.c editfns.c fns.c dired.el
   xterm.c keyboard.c simple.el eval.c info.el buffer.c sysdep.c emacs.c
-  and 483 other files
+  and 485 other files
 
 Andreas Seltenreich: changed nnweb.el gnus.texi message.el gnus.el
   nnslashdot.el gnus-util.el mm-url.el mm-uu.el url-http.el xterm.c
@@ -435,8 +435,8 @@
 and co-wrote longlines.el
 and changed xdisp.c simple.el files.el display.texi frames.texi
   files.texi emacs.texi keyboard.c cus-edit.el faces.el xterm.c
-  Makefile.in xfaces.c font.c startup.el xfns.c misc.texi image.c
-  compile.el custom.texi text.texi and 633 other files
+  Makefile.in misc.texi xfaces.c font.c startup.el xfns.c compile.el
+  image.c custom.texi configure.in and 635 other files
 
 Chris Chase: co-wrote idlw-shell.el idlwave.el
 
@@ -868,7 +868,7 @@
 and changed msdos.c makefile.w32-in Makefile.in files.el info.el rmail.el
   fileio.c mainmake.v2 pc-win.el startup.el config.bat simple.el msdos.h
   dired.c w32.c frame.c internal.el menu-bar.el process.c INSTALL
-  xfaces.c and 602 other files
+  xfaces.c and 603 other files
 
 Elias Oltmanns: changed tls.el gnus-agent.el gnus-int.el gnus-srvr.el
   gnus.el
@@ -1002,7 +1002,7 @@
 Florian Weimer: changed message.el gnus.el coding.c gnus-sum.el gnus.texi
   mm-decode.el mm-util.el
 
-Francesc Rocher: changed startup.el MORE.STUFF cus-start.el gnus.el
+Francesc Rocher: changed MORE.STUFF startup.el cus-start.el gnus.el
   gnus.png gnus.svg macterm.c splash.png splash.svg splash8.xpm w32term.c
   xdisp.c xterm.c
 
@@ -1131,9 +1131,9 @@
 Glenn Morris: wrote check-declare.el
 and changed Makefile.in calendar.el diary-lib.el rmail.el f90.el
   cal-menu.el cal-hebrew.el fortran.el holidays.el configure.in
-  cal-islam.el bytecomp.el calendar.texi cal-bahai.el files.el appt.el
-  cal-china.el emacs.texi rmailsum.el simple.el startup.el
-  and 975 other files
+  cal-islam.el bytecomp.el calendar.texi cal-bahai.el emacs.texi files.el
+  appt.el cal-china.el rmailsum.el simple.el startup.el
+  and 976 other files
 
 Glynn Clements: wrote gamegrid.el snake.el tetris.el
 
@@ -1346,7 +1346,7 @@
 and changed gtkutil.c xterm.c xfns.c configure.in xterm.h xmenu.c
   x-win.el Makefile.in gtkutil.h keyboard.c frame.c frames.texi config.in
   emacs.c xselect.c xresources.texi startup.el alloc.c cus-start.el
-  xlwmenu.c process.c and 203 other files
+  xlwmenu.c frame.h and 203 other files
 
 Jan Moringen: co-wrote cpp.el
 
@@ -1635,7 +1635,7 @@
 Juanma Barranquero: changed makefile.w32-in subr.el files.el faces.el
   bs.el help-fns.el w32fns.c org.el server.el simple.el emacsclient.c
   desktop.el buffer.c mule-cmds.el ido.el window.c xdisp.c allout.el
-  keyboard.c replace.el eval.c and 930 other files
+  keyboard.c replace.el eval.c and 932 other files
 
 Juergen Hoetzel: changed url-handlers.el
 
@@ -1657,7 +1657,7 @@
 and changed info.el isearch.el simple.el replace.el dired-aux.el
   startup.el grep.el compile.el dired.el files.el faces.el display.texi
   menu-bar.el descr-text.el cus-edit.el bindings.el man.el image-mode.el
-  ispell.el text.texi dired-x.el and 280 other files
+  ispell.el text.texi dired-x.el and 281 other files
 
 Justin Bogner: changed fortune.el
 
@@ -1770,7 +1770,7 @@
 and co-wrote ps-def.el ps-mule.el ps-print.el ps-samp.el quail.el
 and changed coding.c mule-cmds.el mule.el fontset.c charset.c fontset.el
   xdisp.c xterm.c font.c fileio.c Makefile.in mule-conf.el characters.el
-  fns.c mule-diag.el ccl.c charset.h ftfont.c xfaces.c coding.h
+  fns.c mule-diag.el ftfont.c ccl.c charset.h xfaces.c coding.h
   japanese.el and 377 other files
 
 Kenichi Okada: co-wrote sasl-cram.el sasl-digest.el
@@ -1969,7 +1969,7 @@
 Magnus Henoch: changed url-http.el ispell.el url.el dbusbind.c dns.el
   url-gw.el url-parse.el url-proxy.el autoinsert.el cl.texi configure.in
   cyrillic.el dbus.el gnus.texi hashcash.el log-edit.el message.el
-  org-latex.el org-table.el process.c rcirc.el and 7 other files
+  org-latex.el org-table.el process.c rcirc.el and 8 other files
 
 Malcolm Purvis: changed spam-stat.el
 
@@ -2432,7 +2432,7 @@
   eudc-vars.el eudc.el eudcb-bbdb.el eudcb-ldap.el eudcb-ph.el ldap.el
 and changed ph.el
 
-Óscar Fuentes: changed emacsclient.c ido.el vc-bzr.el
+Óscar Fuentes: changed ido.el emacsclient.c vc-bzr.el
 
 P. E. Jareth Hein: changed gnus-util.el
 
@@ -2951,7 +2951,9 @@
 
 Steinar Bang: changed imap.el
 
-Štěpán Němec: changed subr.el vc-git.el
+Štěpán Němec: changed INSTALL cl.texi edebug.texi loading.texi maps.texi
+  mark.texi message.texi mini.texi minibuf.texi misc.texi programs.texi
+  subr.el tips.texi url.texi vc-git.el windows.texi
 
 Stephan Stahl: changed which-func.el buff-menu.el buffer.c dired-x.texi
   ediff-mult.el
@@ -3080,7 +3082,7 @@
 and changed spam.el gnus.el gnus-sum.el gnus.texi nnimap.el netrc.el
   spam-stat.el gnus-start.el gnus-util.el nnmail.el encrypt.el message.el
   gnus-encrypt.el mail-source.el assistant.el auth.texi imap.el
-  nnbabyl.el nnfolder.el nnmbox.el nnmh.el and 48 other files
+  nnbabyl.el nnfolder.el nnmbox.el nnmh.el and 51 other files
 
 Terje Rosten: changed xfns.c version.el xterm.c xterm.h
 

--- a/etc/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/etc/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,15 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* PROBLEMS: Document gcc-4.5 bug (Bug#6031).
+
[phone]  Kenichi Handa  <[e-mail]>
+
+	* HELLO: Adjust Burmese for Unicode 5.2 encoding.
+
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-07  Eli Zaretskii  <[e-mail]>
 
 	* HELLO: Reorder Arabic greetings into logical order (they were

--- a/etc/HELLO	Sat May 08 11:42:56 2010 -0700
+++ b/etc/HELLO	Sat May 08 14:47:07 2010 -0400
@@ -7,7 +7,7 @@
   Middle/Near East: ,Hylem(B, ,GGdSqdGe(B ,GYdjce(B
   South Asia: $,19h9n9x:-9d:'(B, $,15h5n5x6-5d6'(B, $,1?(?.?8?M>u?>?0(B, $,1@H@N@X@m@5@^@P@"(B, $,1;6;A;#;?;,;G(B,
               $,1AFAzB4AvB=B AqB*(B, $,1<U<C<5<m<5<N<m(B, $,1=h=n=x>-=U=~=p=B(B, $(7"7"!#C!;"E"S"G!;"7"2"[!;"D"["#"G!>(B
-  South East Asia: $,1\'\f\:\V\4\?\]\:(B, (1JP:R-4U(B, $,1H9H$HYrmH"H<HLH5HL(B, ,TJGQJ4U$CQ:(B, Ch,1`(Bo b,1U(Bn
+  South East Asia: $,1\'\f\:\V\4\?\]\:(B, (1JP:R-4U(B, $,1H9H$HZHYH"H<HLH5HK(B, ,TJGQJ4U$CQ:(B, Ch,1`(Bo b,1U(Bn
   East Asia: $ADc:C(B, $(0*/=((B, $B$3$s$K$A$O(B, $(C>H3gGO<<?d(B
   Misc: E,C6(Bo,C~(Ban,Cx(Bo ,Cf(Biu,C<(Ba,C}(Bde, $,2(3(1('('(5(B, $,1x (B p $,1x((B world $,1s"(B hello p  $,2!a(B
   CJK variety: GB($AT*Fx(B,$A?*7"(B), BIG5($(0&x86(B,$(0DeBv(B), JIS($B855$(B,$B3+H/(B), KSC($(Cj*Q((B,$(CKR[!(B)
@@ -19,7 +19,7 @@
 Arabic $,1ro(B(,GGdYQHjqI(B)	,GGdSqdGe(B ,GYdjce(B
 Bengali ($,17,7>6b727>(B)	$,17(7.787M6u7>70(B
 Braille	$,2(3(1('('(5(B
-Burmese ($,1H9HYH;H4HYrlH9HL(B)	$,1H9H$HYrmH"H<HLH5HL(B
+Burmese ($,1H9H\H4HZH9HL(B)	$,1H9H$HZHYH"H<HLH5HK(B
 C	printf ("Hello, world!\n");
 Czech (,Bh(Be,B9(Btina)	Dobr,A}(B den
 Danish (dansk)	Hej / Goddag / Hall,Ax(Bj

--- a/etc/NEWS.23	Sat May 08 11:42:56 2010 -0700
+++ b/etc/NEWS.23	Sat May 08 14:47:07 2010 -0400
@@ -14,97 +14,80 @@
 You can narrow news to a specific version by calling `view-emacs-news'
 with a prefix argument or by typing C-u C-h C-n.
 
-
-Temporary note:
- +++ indicates that the appropriate manual has already been updated.
- --- means no change in the manuals is called for.
-When you add a new item, please add it without either +++ or ---
-so we will look at it and add it to the manual.
-
 
 * Installation Changes in Emacs 23.2
 
----
-** New configure options for Emacs developers
+** New configure options for Emacs developers.
 These are not new features; only the configure flags are new.
----
+
 *** --enable-profiling builds Emacs with profiling enabled.
 This might not work on all platforms.
----
+
 *** --enable-checking[=OPTIONS] builds emacs with extra runtime checks.
 
----
 ** `make install' now consistently ignores umask, creating a
 world-readable install.
 
-+++
 ** Emacs compiles with Gconf support, if it is detected.
 Use the configure option --without-gconf to disable this.
 This is used by the `font-use-system-font' feature (see below).
 
 * Startup Changes in Emacs 23.2
-+++
+
 ** The command-line option -Q (--quick) also inhibits loading X resources.
 However, if Emacs is compiled with the Lucid or Motif toolkit, X
 resource settings for the graphical widgets are still applied.
 On Windows, the -Q option causes Emacs to ignore Registry settings,
 but environment variables set on the Registry are still honored.
-+++
+
 *** The new variable `inhibit-x-resources' shows whether X resources
 were loaded.
 
-+++
 ** New command-line option -mm (--maximized) maximizes the initial frame.
 
 * Changes in Emacs 23.2
 
-+++
 ** The maximum size of buffers (and the largest fixnum) is doubled.
 On typical 32bit systems, buffers can now be up to 512MB.
 
----
 ** The default value of `trash-directory' is now nil.
 This means that `move-file-to-trash' trashes files according to
 freedesktop.org specifications, the same method used by the Gnome,
 KDE, and XFCE desktops.  (This change has no effect on Windows, which
 uses `system-move-file-to-trash' for trashing.)
 
-+++
 ** The pointer now becomes invisible when typing.
 Customize `make-pointer-invisible' to disable this feature.
 
 ** Font changes
-+++
+
 *** Emacs can use the system default monospaced font in Gnome.
 To enable this feature, set `font-use-system-font' to non-nil (it is
 nil by default).  If the system default changes, Emacs changes also.
 This feature requires Gconf support, which is automatically included
 at compile-time if configure detects the gconf libraries (you can
 disable this with the configure option --without-gconf).
----
+
 *** On X11, Emacs reacts to Xft changes made by configuration tools,
 via the XSETTINGS mechanism.  This includes antialias, hinting,
 hintstyle, RGBA, DPI and lcdfilter changes.
 
-+++
 ** Killing a buffer with a running process now asks for confirmation.
 To remove this query, remove `process-kill-buffer-query-function' from
 `kill-buffer-query-functions', or set the appropriate process flag
 with `set-process-query-on-exit-flag'.
 
 ** File-local variable changes
-+++
+
 *** Specifying a minor mode as a local variables enables that mode,
 unconditionally.  The previous behavior, toggling the mode, was
 neither reliable nor generally desirable.
 
-+++
 *** There are new commands for adding and removing file-local variables:
 `add-file-local-variable', `delete-file-local-variable',
 `add-file-local-variable-prop-line', and
 `delete-file-local-variable-prop-line'.
 
-+++
 *** There are new commands for adding and removing directory-local variables,
 and copying them to and from file-local variable lists:
 `add-dir-local-variable', `delete-dir-local-variable',
@@ -113,55 +96,63 @@
 `copy-file-locals-to-dir-locals'.
 
 ** Internationalization changes
-+++
+
 *** Unibyte sessions are now considered obsolete.
 This refers to the EMACS_UNIBYTE environment variable as well as the
 --unibyte, --multibyte, --no-multibyte, and --no-unibyte command line
 arguments.  Customizing enable-multibyte-characters and setting
 default-enable-multibyte-characters are also deprecated.
----
+
 *** New coding system `utf-8-hfs'.
 This is suitable for default-file-name-coding-system on Mac OS X; see
 international/ucs-normalize.el.
 
----
 ** Function arguments in *Help* buffers are now shown in upper-case.
 Customize `help-downcase-arguments' to t to show them in lower-case.
 
+** New command `async-shell-command', bound globally to `M-&'.
+This executes the command asynchronously, similar to calling `M-!' and
+manually adding an ampersand to the end of the command.  With `M-&',
+you don't need the ampersand.  The output appears in the buffer
+`*Async Shell Command*'.
+
+** When running in a new enough xterm (newer than version 242), Emacs
+asks xterm what the background color is and it sets up faces
+accordingly for a dark background if needed (the current default is to
+consider the background light).
+
 
 * Editing Changes in Emacs 23.2
 
 ** Kill-ring and selection changes
-+++
+
 *** If `select-active-regions' is t, any active region automatically
 becomes the primary selection (for interaction with other window
 applications).  If you enable this, you might want to bind
 `mouse-yank-primary' to Mouse-2.
-+++
+
 *** When `save-interprogram-paste-before-kill' is non-nil, the kill
 commands save the interprogram-paste selection into the kill ring
 before doing anything else.  This avoids losing the selection.
-+++
+
 *** When `kill-do-not-save-duplicates' is non-nil, identical
 subsequent kills are not duplicated in the `kill-ring'.
 
 ** Completion changes
 
 *** The new command `completion-at-point' provides mode-sensitive completion.
-+++
+
 *** tab-always-indent set to `complete' lets TAB do completion as well.
-+++
+
 *** The new completion-style `initials' is available.
 For instance, this can complete M-x lch to list-command-history.
----
+
 *** The new variable `completions-format' determines how completions
 are displayed in the *Completions* buffer.  If you set it to
 `vertical', completions are sorted vertically in columns.
 
-+++
 ** The default value of `blink-matching-paren-distance' is increased.
 
----
 ** M-n provides more default values in the minibuffer for commands
 that read file names.  These include the file name at point (when ffap
 is loaded without ffap-bindings), the file name on the current line
@@ -169,59 +160,44 @@
 (for Dired commands that operate on several directories, such as copy,
 rename, or diff).
 
-+++
 ** M-r is bound to the new `move-to-window-line-top-bottom'.
 This moves point to the window center, top and bottom on successive
 invocations, in the same spirit as the C-l (recenter-top-bottom)
 command.
 
-+++
 ** The new variable `recenter-positions' determines the default
 cycling order of C-l (`recenter-top-bottom').
 
-+++
 ** The abbrevs file is now a file named abbrev_defs in
 user-emacs-directory; but the old location, ~/.abbrev_defs, is used if
 that file exists.
+
 
 * Changes in Specialized Modes and Packages in Emacs 23.2
 
----
 ** The bookmark menu has a narrowing search via bookmark-bmenu-search.
 
-** LaTeX mode now provides completion (via completion-at-point).
-
----
-** sym-comp.el is now declared obsolete, superseded by completion-at-point.
-
----
-** lucid.el and levents.el are now declared obsolete.
-
----
-** pcomplete provides a new command `pcomplete-std-completion' which
-is similar to `pcomplete' but using the standard completion UI code.
-
 ** Calc
-+++
+
 *** The Calc settings file is now a file named calc.el in
 user-emacs-directory; but the old location, ~/.calc.el, is used if
 that file exists.
----
+
 *** Graphing commands (`g f' etc.) now work on MS-Windows, if you have
 the native Windows port of Gnuplot version 3.8 or later installed.
 
 ** Calendar and diary
-+++
+
 *** Fancy diary display is now the default.
 If you prefer the simple display, customize `diary-display-function'.
-+++
+
 *** The diary's fancy display now enables view-mode.
----
+
 *** The command `calendar-current-date' accepts an optional argument
 giving an offset from today.
 
 ** Desktop
----
+
 *** The default value for `desktop-buffers-not-to-save' is nil.
 This means Desktop will try restoring all buffers, when you restart
 your Emacs session.  Also, `desktop-buffers-not-to-save' is only
@@ -230,37 +206,50 @@
 `desktop-files-not-to-save' instead.
 
 ** Dired
-+++
+
 *** The new variable `dired-auto-revert-buffer', if non-nil, causes
 Dired buffers to be reverted automatically on revisiting them.
 
 ** DocView
-+++
+
 *** When `doc-view-continuous' is non-nil, scrolling a line
 on the page edge advances to the next/previous page.
 
+** Elint
+
+*** Elint now uses compilation-mode.
+
+*** Elint can now scan individual files and whole directories,
+and can be run in batch mode.
+
+*** Elint does a more thorough initialization, and recognizes more built-in
+functions and variables.  Customize `elint-scan-preloaded' if you want
+to sacrifice some accuracy for a faster startup.
+
+*** Elint attempts some basic understanding of featurep and (f)boundp tests.
+
+*** Customize `elint-ignored-warnings' to suppress some warnings.
+
 ** GDB-UI
 
-+++
 *** Toolbar functionality for reverse debugging.  Display of STL
 collections as watch expressions.  These features require GDB 7.0 or later.
 
 ** Grep
-+++
+
 *** A new command `zrgrep' searches recursively in gzipped files.
 
 ** Info
 
-+++
 *** The new command `Info-virtual-index' bound to "I" displays a menu of
 matched topics found in the index.
 
-+++
 *** The new command `info-finder' replaces finder.el with a virtual Info
 manual that generates an Info file which gives the same information
 through a menu structure.
 
-+++
+** LaTeX mode now provides completion (via completion-at-point).
+
 ** Message mode is now the default mode for composing mail.
 
 The default for `mail-user-agent' is now message-user-agent, so the
@@ -270,7 +259,6 @@
 for several years.  It provides several features that are absent in
 Mail mode, such as MIME handling.
 
----
 *** If the user has not customized mail-user-agent, `compose-mail'
 checks for Mail mode customizations, and issues a warning if these
 customizations are found.  This alerts users who may otherwise be
@@ -278,110 +266,87 @@
 
 To disable this check, set compose-mail-user-agent-warnings to nil.
 
----
 ** The default value of mail-interactive is t, since Emacs 23.1.
 (This was not announced at the time.)  It means that when sending mail,
 Emacs will wait for the process sending mail to return.  If you
 experience delays when sending mail, you may wish to set this to nil.
 
-+++
 ** nXML mode is now the default for editing XML files.
 
+** pcomplete provides a new command `pcomplete-std-completion' which
+is similar to `pcomplete' but using the standard completion UI code.
+
 ** Shell (and other comint modes)
-+++
+
 *** M-s is no longer bound to `comint-next-matching-input'.
-+++
+
 *** M-r is now bound to `comint-history-isearch-backward-regexp'.
 This starts an incremental search of the comint/shell input history.
-+++
+
 *** ansi-color is now enabled by default in Shell mode.
 To disable it, set ansi-color-for-comint-mode to nil.
 
 ** Tramp
-+++
+
 *** New connection methods "rsyncc", "imap" and "imaps".
 On systems which support GVFS-Fuse, Tramp offers also the new
 connection methods "dav", "davs", "obex" and "synce".
 
 ** VC and related modes
-+++
+
 *** When using C-x v v or C-x v i on a unregistered file that is in a
 directory not controlled by any VCS, ask the user what VC backend to
 use to create a repository, create a new repository and register the
 file.
-+++
+
 *** New command `vc-root-print-log', bound to `C-x v L'.
 This displays a `*vc-change-log*' buffer showing the history of the
 version-controlled directory tree as a whole.
-+++
+
 *** New command `vc-root-diff', bound to `C-x v D'.
 This is similar to `vc-diff', but compares the entire directory tree
 of the current VC directory with its working revision.
-+++
+
 *** `C-x v l' and `C-x v L' do not show the full log by default.
 The number of entries shown can be chosen interactively with a prefix
 argument, or by customizing vc-log-show-limit.  The `*vc-change-log*'
 buffer now contains buttons at the end of the buffer, which can be
 used to increase the number of entries shown.  RCS, SCCS, and CVS do
 not support this feature.
----
+
 *** vc-annotate supports annotations through file copies and renames,
 it displays the old names for the files and it can show logs/diffs for
 the corresponding lines.  Currently only Git and Mercurial take
 advantage of this feature.
----
+
 *** The log command in vc-annotate can display a single log entry
 instead of redisplaying the full log.  The RCS, CVS and SCCS VC
 backends do not support this.
----
+
 *** When a file is not found, VC will not try to check it out of RCS anymore.
-+++
+
 *** Diff and log operations can be used from Dired buffers.
 
 *** vc-git changes
 
----
 **** The short log format for git makes use of the graph display,
 so it's not supported on git versions earlier than 1.5.6.
 
----
 **** vc-dir uses the --relative option of git, and so requires at least
 git version 1.5.5.
 
-+++
 **** Support for operating with stashes has been added to vc-dir:
 the stash list is displayed in the *vc-dir* header, stashes can be
 created, removed, applied and their content displayed.
 
-+++
 *** vc-bzr supports operating with shelves: the shelve list is
 displayed in the *vc-dir* header, shelves can be created, removed and applied.
----
+
 *** log-edit-strip-single-file-name controls whether or not single filenames
 are stripped when copying text from the ChangeLog to the *VC-Log* buffer.
 
-** Elint
----
-*** Elint now uses compilation-mode.
----
-*** Elint can now scan individual files and whole directories,
-and can be run in batch mode.
----
-*** Elint does a more thorough initialization, and recognizes more built-in
-functions and variables.  Customize `elint-scan-preloaded' if you want
-to sacrifice some accuracy for a faster startup.
----
-*** Elint attempts some basic understanding of featurep and (f)boundp tests.
----
-*** Customize `elint-ignored-warnings' to suppress some warnings.
-
 ** Miscellaneous
-+++
-*** The new command `async-shell-command' bound globally to `M-&' executes
-the command asynchronously without the need to manually add ampersand to
-the end of the command.  Its output appears in the buffer `*Async Shell
-Command*'.
-+++
+
 *** Interactively `multi-isearch-buffers' and `multi-isearch-buffers-regexp'
 read buffer names to search, one by one, ended with RET.  With a prefix
 argument, they ask for a regexp, and search in buffers whose names match
@@ -389,19 +354,20 @@
 `multi-isearch-files-regexp' read file names to search, one by one,
 ended with RET.  With a prefix argument, they ask for a wildcard, and
 search in file buffers whose file names match the specified wildcard.
-+++
+
 *** Autorevert Tail mode now works also for remote files.
-+++
-*** The new built-in commands `su' and `sudo' support Tramp.
-That means, they change `default-directory' to the new users value,
-and let commands run under that user permissions.  It works even when
+
+*** The new eshell built-in commands `su' and `sudo' support Tramp.
+Thus, they change `default-directory' to reflect the new user id, and
+let commands run under that user's permissions.  This works even when
 `default-directory' is already remote.  Calling the external commands
-is possible by `*su' or `*sudo', respectively.
----
-*** When running in a new enough xterm (newer than version 242), Emacs
-asks xterm what the background color is and it sets up faces
-accordingly for a dark background if needed (the current default is to
-consider the background light).
+is possible via `*su' or `*sudo', respectively.
+
+** Obsolete packages
+
+*** sym-comp.el is now obsolete, superseded by completion-at-point.
+
+*** lucid.el and levents.el are now obsolete.
 
 
 * New Modes and Packages in Emacs 23.2
@@ -410,7 +376,6 @@
 This is a collection of packages to aid with using Emacs as an IDE
 (integrated development environment):
 
-+++
 *** The Semantic package allows the use of parsers to intelligently
 edit and navigate source code.  Parsers for C/C++, Java, Javascript,
 and several other languages are included by default, and Semantic can
@@ -419,7 +384,6 @@
 To enable Semantic, use the global minor mode `semantic-mode'.
 See the Semantic manual for details.
 
-+++
 *** EDE (Emacs Development Environment) is a package for managing code
 projects, including features such as automatic Makefile generation.
 
@@ -430,25 +394,20 @@
 code.  It is currently used by some parts of Semantic and EDE; in the
 future, it may be used for code generation features.
 
-+++
 *** The EIEIO library implements a subset of the Common Lisp Object
 System (CLOS).  It is used by the other CEDET packages.
 
----
 ** mpc.el is a front end for the Music Player Daemon.  Run it with M-x mpc.
 
 ** htmlfontify.el turns a fontified Emacs buffer into an HTML page.
 
-+++
 ** js.el is a new major mode for JavaScript files.
 
----
 ** imap-hash.el is a new library to address IMAP mailboxes as hashtables.
 
 
 * Incompatible Lisp Changes in Emacs 23.2
 
-+++
 ** The Lisp reader turns integers that are too large/small into floats.
 For instance, on machines where `536870911' is the largest integer,
 reading `536870912' gives the floating-point object `536870912.0'.
@@ -456,7 +415,6 @@
 This change only concerns the Lisp reader; it does not affect how
 actual integer objects overflow.
 
----
 ** Several obsolete functions removed.
 The functions have been obsolete since Emacs 19, and are unlikely to
 be in use:
@@ -466,11 +424,9 @@
   time-stamp-yyyy-mm-dd, time-stamp-yymmdd, time-stamp-hh:mm:ss,
   time-stamp-hhmm, baud-rate
 
----
 ** Support for generating Emacs 18 compatible bytecode (by setting
 the variable `byte-compile-compatibility') has been removed.
 
----
 ** In image-mode.el `image-mode-maybe' is obsolete.
 Instead, you can either use `image-mode' (which displays an image file
 as the actual image initially), or `image-mode-as-text' (when you want
@@ -484,7 +440,7 @@
 
 
 * Lisp changes in Emacs 23.2
----
+
 ** All the default-FOO variables that hold the default value of the FOO
 variable, are now declared obsolete.
 
@@ -492,10 +448,10 @@
 It reads a single key, but obeys input and escape sequence decoding.
 
 ** Frame parameter changes
-+++
+
 *** You can give the `fullscreen' frame parameter the value `maximized'.
 This maximizes the frame.
-+++
+
 *** The new frame parameter `sticky' makes Emacs frames sticky in
 virtual desktops.
 
@@ -509,23 +465,23 @@
 
 *** New function `completion-in-region' to use the standard completion
 facilities on a particular region of text.
-+++
+
 *** The 4th arg to all-completions (aka hide-spaces) is declared obsolete.
 
 *** completion-annotate-function specifies how to compute annotations
 for completions displayed in *Completions*.
 
 ** Minibuffer changes
----
+
 *** read-file-name-predicate is obsolete.  It was used to pass the predicate
 to read-file-name-internal because read-file-name-internal abused its `pred'
 argument to pass the current directory, but this hack is not needed
 any more.
 
 ** Changes to file-manipulation functions
-+++
+
 *** `delete-directory' has an optional parameter RECURSIVE.
-+++
+
 *** New function `copy-directory', which copies a directory recursively.
 
 ** called-interactively-p now takes one argument and replaces interactive-p
@@ -540,34 +496,33 @@
 of bindings.
 
 ** Network and process changes
-+++
+
 *** start-process-shell-command and start-file-process-shell-command
 now only take a single `command' argument.
-+++
+
 *** The new variable `process-file-side-effects' should be set to nil
 if a `process-file' call does not change a remote file.  This allows
 file name handlers such as Tramp to optimizations.
-+++
+
 *** make-network-process can now also create `seqpacket' Unix sockets.
 
 ** Loading changes
----
+
 *** eval-next-after-load is obsolete.
-+++
+
 *** New hook `after-load-functions' run after loading an Elisp file.
 
 ** Byte compilation changes
----
+
 *** Changing the file-names generated by byte-compilation by redefining
 the function `byte-compile-dest-file' before loading bytecomp.el is obsolete.
 Instead, customize byte-compile-dest-file-function.
----
+
 *** `byte-compile-warnings' has new members, `constants' and `suspicious'.
 
 ** New macro with-silent-modifications to tweak text properties without
 affecting the buffer's modification state.
 
-+++
 ** Hash tables have a new printed representation that is readable.
 The feature `hashtable-print-readable' identifies this new
 functionality.
@@ -580,17 +535,14 @@
 ucs-normalize-HFS-NFD-region, ucs-normalize-HFS-NFD-string,
 ucs-normalize-HFS-NFC-region, ucs-normalize-HFS-NFC-string.
 
-+++
 ** Face aliases can now be marked as obsolete, using the macro
 `define-obsolete-face-alias'.
 
-+++
 ** New function `window-full-height-p', analogous to the full-width version.
 
 
 * Changes in Emacs 23.2 on non-free operating systems
 
----
 ** On MS-Windows, `display-time' now displays the system load average
 as well as the time, as it does on GNU and Unix.
 
@@ -1398,11 +1350,11 @@
 ** Gnus
 
 *** The Gnus package has been updated
-There are many news features, bug fixes and improvements; see the file
+There are many new features, bug fixes and improvements; see the file
 GNUS-NEWS or the node "No Gnus" in the Gnus manual for details.
 
 *** In Emacs 23, Gnus uses Emacs' new internal coding system `utf-8-emacs' for
-saving articles drafts and ~/.newsrc.eld.  These file may not be read
+saving articles, drafts, and ~/.newsrc.eld.  These file may not be read
 correctly in Emacs 22 and below.  If you want to Gnus across different Emacs
 versions, you may set `mm-auto-save-coding-system' to `emacs-mule'.
 
@@ -1455,8 +1407,8 @@
 *** `C-h C-h' in Isearch mode displays isearch-specific Help screen,
 `C-h b' displays all Isearch key bindings, `C-h k' displays the full
 documentation of the given Isearch key sequence, `C-h m' displays
-documentation of Isearch mode.  All the rest Help commands exit Isearch mode
-and execute their global definitions.
+documentation for Isearch mode.  All the other Help commands exit
+Isearch mode and execute their global definitions.
 
 *** When started in the minibuffer, Isearch searches in the minibuffer
 history.  See `Minibuffer changes', above.

--- a/etc/PROBLEMS	Sat May 08 11:42:56 2010 -0700
+++ b/etc/PROBLEMS	Sat May 08 14:47:07 2010 -0400
@@ -167,6 +167,17 @@
 
 * Crash bugs
 
+** Emacs crashes when running in a terminal, if compiled with GCC 4.5.0
+This version of GCC is buggy: see
+
+  http://debbugs.gnu.org/cgi/bugreport.cgi?bug=6031
+  http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43904
+
+You can work around this error in gcc-4.5 by omitting sibling call
+optimization.  To do this, configure Emacs with
+
+ CFLAGS="-g -O2 -fno-optimize-sibling-calls" ./configure
+
 ** Emacs crashes in x-popup-dialog.
 
 This can happen if the dialog widget cannot find the font it wants to

--- a/etc/enriched.doc	Sat May 08 11:42:56 2010 -0700
+++ b/etc/enriched.doc	Sat May 08 14:47:07 2010 -0400
@@ -219,7 +219,7 @@
 paragraph properly filled all the time, without slowing down
 editing too much.  Refill mode is a start at this, but needs
 
-</indent></indent>	<indent>improvment.
+</indent></indent>	<indent>improvement.
 
 + Refill after yank.  [Refill mode does that.]
 
@@ -272,4 +272,4 @@
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+    along with this program.  If not, see <<http://www.gnu.org/licenses/>.

--- a/leim/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/leim/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-04-06  Chong Yidong  <[e-mail]>
 
 	* quail/vntelex.el: Fix "af" rule (Bug#5836).

--- a/lib-src/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/lib-src/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,7 +1,16 @@
[phone]  Christoph  <[e-mail]>  (tiny change)
+
+	* makefile.w32-in (OTHER_PLATFORM_SUPPORT): Use parenthesis
+	for macros for nmake compatibility.
+
 2010-05-08  Glenn Morris  <[e-mail]>
 
 	* Makefile.in (THIS_IS_MAKEFILE): Remove, unused.
 
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-06  Glenn Morris  <[e-mail]>
 
 	* Makefile.in: Minimize blessmail-related cpp usage.

--- a/lisp/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,95 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* international/mule.el (auto-coding-alist):  Only purecopy
+	car of each item, not the whole list (Bug#6083).
+
[phone]  Chong Yidong  <[e-mail]>
+
+	* progmodes/js.el (js-mode): Make paragraph variables local before
+	calling c-setup-paragraph-variables (Bug#6071).
+
[phone]  Eli Zaretskii  <[e-mail]>
+
+	* composite.el (compose-region, reference-point-alist): Fix typos
+	in the doc strings.
+
[phone]  Alexander Klimov <[e-mail]> (tiny change)
+
+	* calc/calc-graph.el (calc-graph-plot): Use the proper form for
+	gnuplot's "set" command.
+
[phone]  Juanma Barranquero  <[e-mail]>
+
+	* abbrev.el (last-abbrev-text): Doc fix.
+	(abbrev-prefix-mark): Don't escape parenthesis.
+
[phone]  Andreas Schwab  <[e-mail]>
+
+	* composite.el (find-composition): Doc fix.
+
[phone]  Juanma Barranquero  <[e-mail]>
+
+	* progmodes/sql.el (sql-electric-stuff): Fix typo in tag.
+	(sql-oracle-program, sql-sqlite-options)
+	(sql-query-placeholders-and-send): Doc fixes.
+	(sql-set-product, sql-interactive-mode): Reflow docstrings.
+	(sql-imenu-generic-expression, sql-buffer)
+	(sql-mode-ansi-font-lock-keywords, sql-mode-oracle-font-lock-keywords)
+	(sql-mode-postgres-font-lock-keywords, sql-mode-ms-font-lock-keywords)
+	(sql-mode-sybase-font-lock-keywords)
+	(sql-mode-informix-font-lock-keywords)
+	(sql-mode-interbase-font-lock-keywords)
+	(sql-mode-ingres-font-lock-keywords, sql-mode-solid-font-lock-keywords)
+	(sql-mode-mysql-font-lock-keywords, sql-mode-sqlite-font-lock-keywords)
+	(sql-mode-db2-font-lock-keywords, sql-mode-font-lock-keywords)
+	(sql-product-feature, sql-highlight-product)
+	(comint-line-beginning-position, sql-rename-buffer)
+	(sql-toggle-pop-to-buffer-after-send-region sql-oracle)
+	(sql-sybase, sql-informix, sql-sqlite, sql-mysql, sql-solid)
+	(sql-ingres, sql-ms, sql-postgres, sql-interbase, sql-db2, sql-linter):
+	Fix typos in docstrings.
+
[phone]  Juri Linkov  <[e-mail]>
+
+	* info.el (Info-fontify-node): Put Info-breadcrumbs to the `display'
+	property instead of `invisible' and `after-string' (bug#5998).
+
[phone]  Juri Linkov  <[e-mail]>
+
+	* image-mode.el (image-mode-as-text): Fix typo in docstring.
+
[phone]  Juanma Barranquero  <[e-mail]>
+
+	* filecache.el (file-cache-add-directory-list)
+	(file-cache-add-directory-recursively): Fix typos in docstrings.
+
[phone]  Kenichi Handa  <[e-mail]>
+
+	* language/indian.el (gurmukhi-composable-pattern): Fix typo.
+	(gujarati-composable-pattern): Fix typo.
+
[phone]  Kenichi Handa  <[e-mail]>
+
+	* language/indian.el (oriya-composable-pattern)
+	(tamil-composable-pattern, malayalam-composable-pattern):
+	Add two-part vowels to "v" (vowel sign).
+
[phone]  Chong Yidong  <[e-mail]>
+
+	* files.el (copy-directory): Handle symlinks (Bug#5982).
+
[phone]  Dan Nicolaescu  <[e-mail]>
+
+	* vc-hg.el (vc-hg-state): Use HGRCPATH, not HGRC.
+	(vc-hg-working-revision): Likewise.  Use hg parents, not hg parent
+	(Bug#5846).
+
[phone]  Glenn Morris  <[e-mail]>
+
+	* emacs-lisp/lisp.el (lisp-completion-at-point): Give it a doc string.
+
+	* minibuffer.el (completion-at-point): Doc fix.
+
 2010-05-08  Stefan Monnier  <[e-mail]>
 
 	* electric.el (Electric-command-loop): Minor tweak.
@@ -5,6 +97,10 @@
 	* ebuff-menu.el (electric-buffer-list): Try and make it behave a bit
 	better with dedicated windows.
 
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-07  Deniz Dogan <[e-mail]>  (tiny change)
             Stefan Monnier  <[e-mail]>
 

--- a/lisp/abbrev.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/abbrev.el	Sat May 08 14:47:07 2010 -0400
@@ -338,7 +338,7 @@
 Abbrev to be expanded starts here rather than at beginning of word.
 This way, you can expand an abbrev with a prefix: insert the prefix,
 use this command, then insert the abbrev.  This command inserts a
-temporary hyphen after the prefix \(until the intended abbrev
+temporary hyphen after the prefix (until the intended abbrev
 expansion occurs).
 If the prefix is itself an abbrev, this command expands it, unless
 ARG is non-nil.  Interactively, ARG is the prefix argument."
@@ -460,7 +460,7 @@
 
 (defvar last-abbrev-text nil
   "The exact text of the last abbrev expanded.
-nil if the abbrev has already been unexpanded.")
+It is nil if the abbrev has already been unexpanded.")
 
 (defvar last-abbrev-location 0
   "The location of the start of the last abbrev expanded.")

--- a/lisp/calc/calc-graph.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/calc/calc-graph.el	Sat May 08 14:47:07 2010 -0400
@@ -345,7 +345,7 @@
 		     "set xlabel\nset ylabel\nset title\n"
 		     "set noclip points\nset clip one\nset clip two\n"
 		     "set format \"%g\"\nset tics\nset xtics\nset ytics\n"
-		     "set data style linespoints\n"
+		     "set style data linespoints\n"
 		     "set nogrid\nset nokey\nset nopolar\n"))
 	 (if (>= ver 3)
 	     (insert "set surface\nset nocontour\n"

--- a/lisp/emacs-lisp/lisp.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/emacs-lisp/lisp.el	Sat May 08 14:47:07 2010 -0400
@@ -628,11 +628,12 @@
         (minibuffer-message "Nothing to complete")
       (let ((completion-annotate-function
              (plist-get plist :annotate-function)))
-        (completion-in-region (nth 0 data) (nth 1 data) (nth 2 data)
+      (completion-in-region (nth 0 data) (nth 1 data) (nth 2 data)
                               (plist-get plist :predicate))))))
-    
+
 
 (defun lisp-completion-at-point (&optional predicate)
+  "Function used for `completion-at-point-functions' in `emacs-lisp-mode'."
   ;; FIXME: the `end' could be after point?
   (let* ((pos (point))
          (beg (with-syntax-table emacs-lisp-mode-syntax-table

--- a/lisp/erc/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/erc/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-03-10  Chong Yidong  <[e-mail]>
 
 	* Branch for 23.2.
@@ -12,8 +16,8 @@
 	(erc-server-reconnect): Use it to reconnect via old
 	connector (Bug#4958).
 
-	* erc.el (erc-determine-parameters): Save
-	erc-server-connect-function to erc-session-connector.
+	* erc.el (erc-determine-parameters):
+	Save erc-server-connect-function to erc-session-connector.
 
 2009-11-03  Stefan Monnier  <[e-mail]>
 

--- a/lisp/filecache.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/filecache.el	Sat May 08 14:47:07 2010 -0400
@@ -296,8 +296,8 @@
 (defun file-cache-add-directory-list (directory-list &optional regexp)
   "Add DIRECTORY-LIST (a list of directory names) to the file cache.
 If the optional REGEXP argument is non-nil, only files which match it
-will be added to the cache. Note that the REGEXP is applied to the files
-in each directory, not to the directory list itself."
+will be added to the cache.  Note that the REGEXP is applied to the
+files in each directory, not to the directory list itself."
   (interactive "XAdd files from directory list: ")
   (mapcar
    (lambda (dir) (file-cache-add-directory dir regexp))
@@ -370,10 +370,10 @@
 ;;;###autoload
 (defun file-cache-add-directory-recursively  (dir &optional regexp)
   "Adds DIR and any subdirectories to the file-cache.
-This function does not use any external programs
+This function does not use any external programs.
 If the optional REGEXP argument is non-nil, only files which match it
-will be added to the cache. Note that the REGEXP is applied to the files
-in each directory, not to the directory list itself."
+will be added to the cache.  Note that the REGEXP is applied to the
+files in each directory, not to the directory list itself."
   (interactive "DAdd directory: ")
   (require 'find-lisp)
   (mapcar

--- a/lisp/files.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/files.el	Sat May 08 14:47:07 2010 -0400
@@ -4753,10 +4753,14 @@
       (mapc
        (lambda (file)
 	 (let ((target (expand-file-name
-			(file-name-nondirectory file) newname)))
-	   (if (file-directory-p file)
-	       (copy-directory file target keep-time parents)
-	     (copy-file file target t keep-time))))
+			(file-name-nondirectory file) newname))
+	       (attrs (file-attributes file)))
+	   (cond ((file-directory-p file)
+		  (copy-directory file target keep-time parents))
+		 ((stringp (car attrs)) ; Symbolic link
+		  (make-symbolic-link (car attrs) target t))
+		 (t
+		  (copy-file file target t keep-time)))))
        ;; We do not want to copy "." and "..".
        (directory-files	directory 'full directory-files-no-dot-files-regexp))
 

--- a/lisp/image-mode.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/image-mode.el	Sat May 08 14:47:07 2010 -0400
@@ -392,7 +392,7 @@
 to display an image file as the actual image.
 
 You can use `image-mode-as-text' in `auto-mode-alist' when you want
-to display an image file as text inititally.
+to display an image file as text initially.
 
 See commands `image-mode' and `image-minor-mode' for more information
 on these modes."

--- a/lisp/info.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/info.el	Sat May 08 14:47:07 2010 -0400
@@ -4343,8 +4343,7 @@
             (cond
              ((> Info-breadcrumbs-depth 0)
 	      (let ((ov (make-overlay (point-min) (1+ header-end))))
-		(overlay-put ov 'invisible t)
-		(overlay-put ov 'after-string (Info-breadcrumbs))
+		(overlay-put ov 'display (Info-breadcrumbs))
 		(overlay-put ov 'evaporate t)))
              ((not (bobp))
               ;; Hide the punctuation at the end, too.

--- a/lisp/international/mule.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/international/mule.el	Sat May 08 14:47:07 2010 -0400
@@ -1690,7 +1690,8 @@
 (defcustom auto-coding-alist
   ;; .exe and .EXE are added to support archive-mode looking at DOS
   ;; self-extracting exe archives.
-  (purecopy '(("\\.\\(\
+  (mapcar (lambda (arg) (cons (purecopy (car arg)) (cdr arg)))
+	  '(("\\.\\(\
 arc\\|zip\\|lzh\\|lha\\|zoo\\|[jew]ar\\|xpi\\|rar\\|7z\\|\
 ARC\\|ZIP\\|LZH\\|LHA\\|ZOO\\|[JEW]AR\\|XPI\\|RAR\\|7Z\\)\\'"
      . no-conversion-multibyte)

--- a/lisp/language/indian.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/language/indian.el	Sat May 08 14:47:07 2010 -0400
@@ -198,15 +198,14 @@
 
 (defconst gurmukhi-composable-pattern
   (let ((table
-	 '(("a" . "[\u0A01-\u0A02]")	; SIGN ADAK BINDI .. BINDI
-	   ("A" . "\u0A03]")		; SIGN VISARGA
+	 '(("a" . "[\u0A01-\u0A02\u0A70]") ; SIGN ADAK BINDI .. BINDI, TIPPI
+	   ("A" . "\u0A03")		; SIGN VISARGA
 	   ("V" . "[\u0A05-\u0A14]")	; independent vowel
 	   ("C" . "[\u0A15-\u0A39\u0A59-\u0A5E]")	; consonant
-	   ("Y" . "[\u0A2F\u0A30\u0A35\u0A39]") ; YA, RA, VA, HA
+	   ("Y" . "[\u0A2F-u0A30\u0A35\u0A39]") ; YA, RA, VA, HA
 	   ("n" . "\u0A3C")		; NUKTA
 	   ("v" . "[\u0A3E-\u0A4C]")	; vowel sign
 	   ("H" . "\u0A4D")		; VIRAMA
-	   ("a" . "\u0A70")		; TIPPI
 	   ("N" . "\u200C")		; ZWNJ
 	   ("J" . "\u200D")		; ZWJ
 	   ("X" . "[\u0A00-\u0A7F]"))))	; all coverage
@@ -226,7 +225,7 @@
 (defconst gujarati-composable-pattern
   (let ((table
 	 '(("a" . "[\u0A81-\u0A82]")	; SIGN CANDRABINDU .. ANUSVARA
-	   ("A" . "\u0A83]")		; SIGN VISARGA
+	   ("A" . "\u0A83")		; SIGN VISARGA
 	   ("V" . "[\u0A85-\u0A94\u0AE0-\u0AE1]") ; independent vowel
 	   ("C" . "[\u0A95-\u0AB9]")	; consonant
 	   ("R" . "\u0AB0")		; RA
@@ -258,7 +257,7 @@
 	   ("B" . "[\u0B15-\u0B17\u0B1B-\u0B1D\u0B1F-\u0B21\u0B23-\u0B24\u0B27-\u0B30\u0B32-\u0B35\u0B38-\u0B39]") ; consonant with below form
 	   ("R" . "\u0B30")		; RA
 	   ("n" . "\u0B3C")		; NUKTA
-	   ("v" . "[\u0B3E-\u0B44\u0B47\u0B56-\u0B57\u0B62-\u0B63]") ; vowel sign
+	   ("v" . "[\u0B3E-\u0B4C\u0B56-\u0B57\u0B62-\u0B63]") ; vowel sign
 	   ("H" . "\u0B4D")		; VIRAMA
 	   ("N" . "\u200C")		; ZWNJ
 	   ("J" . "\u200D")		; ZWJ
@@ -281,7 +280,7 @@
 	 '(("a" . "\u0B82")		; SIGN ANUSVARA
 	   ("V" . "[\u0B85-\u0B94]")	; independent vowel
 	   ("C" . "[\u0B95-\u0BB9]")	; consonant
-	   ("v" . "[\u0BBE-\u0BC8\u0BD7]") ; vowel sign
+	   ("v" . "[\u0BBE-\u0BCC\u0BD7]") ; vowel sign
 	   ("H" . "\u0BCD")		; VIRAMA
 	   ("N" . "\u200C")		; ZWNJ
 	   ("J" . "\u200D")		; ZWJ
@@ -351,7 +350,7 @@
 	   ("V" . "[\u0D05-\u0D14\u0D60-\u0D61]") ; independent vowel
 	   ("C" . "[\u0D15-\u0D39]")		  ; consonant 
 	   ("Y" . "[\u0D2F-\u0D30\u0D32\u0D35]")  ; YA, RA, LA, VA
-	   ("v" . "[\u0D3E-\u0D48\u0D57\u0D62-\u0D63]")	; postbase matra
+	   ("v" . "[\u0D3E-\u0D4C\u0D57\u0D62-\u0D63]")	; postbase matra
 	   ("H" . "\u0D4D")			  ; SIGN VIRAMA
 	   ("N" . "\u200C")			  ; ZWNJ
 	   ("J" . "\u200D")			  ; ZWJ

--- a/lisp/mh-e/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/mh-e/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-03  Stefan Monnier  <[e-mail]>
 
 	* mh-show.el (mh-showing-mode): Move function to mh-e.el.

--- a/lisp/minibuffer.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/minibuffer.el	Sat May 08 14:47:07 2010 -0400
@@ -1169,7 +1169,7 @@
  `:predicate'           a predicate that completion candidates need to satisfy.
  `:annotation-function' the value to use for `completion-annotate-function'.")
 
-(defun complete-symbol (&optional arg)
+(defun completion-at-point (&optional arg)
   "Perform completion on the text around point.
 The completion method is determined by `completion-at-point-functions'.
 
@@ -1193,7 +1193,7 @@
 	  (completion-in-region start end (nth 2 res)
 				(plist-get plist :predicate))))))))
 
-(defalias 'completion-at-point 'complete-symbol)
+(define-obsolete-function-alias 'complete-symbol 'completion-at-point "24.1")
 
 ;;; Key bindings.
 

--- a/lisp/org/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/org/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-05  Stefan Monnier  <[e-mail]>
 
 	* org-table.el (orgtbl-setup):
@@ -40,8 +44,7 @@
 	* org-latex.el (org-export-latex-classes): Update docstring.
 
 	* org.el (org-format-latex-header): Add cookies to the header.
-	(org-splice-latex-header): Implement placement according to
-	cookies.
+	(org-splice-latex-header): Implement placement according to cookies.
 
 2010-04-10  Carsten Dominik  <[e-mail]>
 
@@ -54,8 +57,8 @@
 
 2010-04-10  Carsten Dominik  <[e-mail]>
 
-	* org-latex.el (org-export-latex-make-header): Use
-	`org-splice-latex-header' to build the header.
+	* org-latex.el (org-export-latex-make-header):
+	Use `org-splice-latex-header' to build the header.
 	(org-export-latex-classes): Update docstring.
 
 	* org.el (org-splice-latex-header): New function.

--- a/lisp/progmodes/js.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/progmodes/js.el	Sat May 08 14:47:07 2010 -0400
@@ -3327,6 +3327,13 @@
         comment-start-skip "\\(//+\\|/\\*+\\)\\s *")
 
   (let ((c-buffer-is-cc-mode t))
+    ;; FIXME: These are normally set by `c-basic-common-init'.  Should
+    ;; we call it instead?  (Bug#6071)
+    (make-local-variable 'paragraph-start)
+    (make-local-variable 'paragraph-separate)
+    (make-local-variable 'paragraph-ignore-fill-prefix)
+    (make-local-variable 'adaptive-fill-mode)
+    (make-local-variable 'adaptive-fill-regexp)
     (c-setup-paragraph-variables))
 
   (set (make-local-variable 'syntax-begin-function)

--- a/lisp/progmodes/sql.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/progmodes/sql.el	Sat May 08 14:47:07 2010 -0400
@@ -419,7 +419,7 @@
 If set to nil, then you must use \\[comint-send-input] in order to send
 current input in the SQLi buffer to the process."
   :type '(choice (const :tag "Nothing" nil)
-		 (const :tag "The semikolon `;'" semicolon)
+		 (const :tag "The semicolon `;'" semicolon)
 		 (const :tag "The string `go' by itself" go))
   :version "20.8"
   :group 'SQL)
@@ -450,9 +450,9 @@
   "Define interesting points in the SQL buffer for `imenu'.
 
 This is used to set `imenu-generic-expression' when SQL mode is
-entered.  Subsequent changes to sql-imenu-generic-expression will not
-affect existing SQL buffers because imenu-generic-expression is a
-local variable.")
+entered.  Subsequent changes to `sql-imenu-generic-expression' will
+not affect existing SQL buffers because imenu-generic-expression is
+a local variable.")
 
 ;; history file
 
@@ -516,7 +516,7 @@
 
 Starts `sql-interactive-mode' after doing some setup.
 
-Under NT, \"sqlplus\" usually starts the sqlplus \"GUI\".  In order to
+On Windows, \"sqlplus\" usually starts the sqlplus \"GUI\".  In order to
 start the sqlplus console, use \"plus33\" or something similar.  You
 will find the file in your Orant\\bin directory.
 
@@ -542,9 +542,7 @@
   :group 'SQL)
 
 (defcustom sql-sqlite-options nil
-  "*List of additional options for `sql-sqlite-program'.
-The following list of options is reported to make things work
-on Windows: \"-C\" \"-t\" \"-f\" \"-n\"."
+  "*List of additional options for `sql-sqlite-program'."
   :type '(repeat string)
   :version "20.8"
   :group 'SQL)
@@ -727,7 +725,7 @@
 (defvar sql-buffer nil
   "Current SQLi buffer.
 
-The global value of sql-buffer is the name of the latest SQLi buffer
+The global value of `sql-buffer' is the name of the latest SQLi buffer
 created.  Any SQL buffer created will make a local copy of this value.
 See `sql-interactive-mode' for more on multiple sessions.  If you want
 to change the SQLi buffer a SQL mode sends its SQL strings to, change
@@ -992,8 +990,8 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-ansi-font-lock-keywords.  You may want to
-add functions and PL/SQL keywords.")
+you define your own `sql-mode-ansi-font-lock-keywords'.  You may want
+to add functions and PL/SQL keywords.")
 
 (defvar sql-mode-oracle-font-lock-keywords
   (let ((oracle-functions (sql-keywords-re
@@ -1208,7 +1206,7 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-oracle-font-lock-keywords.  You may want
+you define your own `sql-mode-oracle-font-lock-keywords'.  You may want
 to add functions and PL/SQL keywords.")
 
 (defvar sql-mode-postgres-font-lock-keywords
@@ -1296,7 +1294,7 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-postgres-font-lock-keywords.")
+you define your own `sql-mode-postgres-font-lock-keywords'.")
 
 (defvar sql-mode-linter-font-lock-keywords
   (let ((linter-keywords (sql-keywords-re
@@ -1482,7 +1480,7 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-ms-font-lock-keywords.")
+you define your own `sql-mode-ms-font-lock-keywords'.")
 
 (defvar sql-mode-sybase-font-lock-keywords nil
   "Sybase SQL keywords used by font-lock.
@@ -1490,7 +1488,7 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-sybase-font-lock-keywords.")
+you define your own `sql-mode-sybase-font-lock-keywords'.")
 
 (defvar sql-mode-informix-font-lock-keywords nil
   "Informix SQL keywords used by font-lock.
@@ -1498,7 +1496,7 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-informix-font-lock-keywords.")
+you define your own `sql-mode-informix-font-lock-keywords'.")
 
 (defvar sql-mode-interbase-font-lock-keywords nil
   "Interbase SQL keywords used by font-lock.
@@ -1506,7 +1504,7 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-interbase-font-lock-keywords.")
+you define your own `sql-mode-interbase-font-lock-keywords'.")
 
 (defvar sql-mode-ingres-font-lock-keywords nil
   "Ingres SQL keywords used by font-lock.
@@ -1514,7 +1512,7 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-interbase-font-lock-keywords.")
+you define your own `sql-mode-interbase-font-lock-keywords'.")
 
 (defvar sql-mode-solid-font-lock-keywords nil
   "Solid SQL keywords used by font-lock.
@@ -1522,7 +1520,7 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-solid-font-lock-keywords.")
+you define your own `sql-mode-solid-font-lock-keywords'.")
 
 (defvar sql-mode-mysql-font-lock-keywords
   (let ((mysql-funcs (sql-keywords-re
@@ -1599,7 +1597,7 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-mysql-font-lock-keywords.")
+you define your own `sql-mode-mysql-font-lock-keywords'.")
 
 (defvar sql-mode-sqlite-font-lock-keywords nil
   "SQLite SQL keywords used by font-lock.
@@ -1607,7 +1605,7 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-sqlite-font-lock-keywords.")
+you define your own `sql-mode-sqlite-font-lock-keywords'.")
 
 (defvar sql-mode-db2-font-lock-keywords nil
   "DB2 SQL keywords used by font-lock.
@@ -1615,14 +1613,14 @@
 This variable is used by `sql-mode' and `sql-interactive-mode'.  The
 regular expressions are created during compilation by calling the
 function `regexp-opt'.  Therefore, take a look at the source before
-you define your own sql-mode-db2-font-lock-keywords.")
+you define your own `sql-mode-db2-font-lock-keywords'.")
 
 (defvar sql-mode-font-lock-keywords nil
   "SQL keywords used by font-lock.
 
 Setting this variable directly no longer has any affect.  Use
 `sql-product' and `sql-add-product-keywords' to control the
-highlighting rules in sql-mode.")
+highlighting rules in SQL mode.")
 
 
 
@@ -1631,7 +1629,7 @@
 (defun sql-product-feature (feature &optional product)
   "Lookup `feature' needed to support the current SQL product.
 
-See \[sql-product-alist] for a list of products and supported features."
+See `sql-product-alist' for a list of products and supported features."
   (plist-get
    (cdr (assoc (or product sql-product)
 	       sql-product-alist))
@@ -1720,8 +1718,7 @@
 ;;; Functions to switch highlighting
 
 (defun sql-highlight-product ()
-  "Turns on the appropriate font highlighting for the SQL product
-selected."
+  "Turn on the appropriate font highlighting for the SQL product selected."
   (when (derived-mode-p 'sql-mode)
     ;; Setup font-lock
     (sql-product-font-lock nil t)
@@ -1730,8 +1727,7 @@
     (setq mode-name (concat "SQL[" (prin1-to-string sql-product) "]"))))
 
 (defun sql-set-product (product)
-  "Set `sql-product' to product and enable appropriate
-highlighting."
+  "Set `sql-product' to product and enable appropriate highlighting."
   (interactive
    (list (completing-read "Enter SQL product: "
                           (mapcar (lambda (info) (symbol-name (car info)))
@@ -1752,7 +1748,7 @@
 (if (not (fboundp 'comint-line-beginning-position))
     ;; comint-line-beginning-position is defined in Emacs 21
     (defun comint-line-beginning-position ()
-      "Returns the buffer position of the beginning of the line, after any prompt.
+      "Return the buffer position of the beginning of the line, after any prompt.
 The prompt is assumed to be any text at the beginning of the line matching
 the regular expression `comint-prompt-regexp', a buffer local variable."
       (save-excursion (comint-bol nil) (point))))
@@ -1974,7 +1970,7 @@
 	    sql-database)))
 
 (defun sql-rename-buffer ()
-  "Renames a SQLi buffer."
+  "Rename a SQLi buffer."
   (interactive)
   (rename-buffer (format "*SQL: %s*" sql-alternate-buffer-name) t))
 
@@ -2007,8 +2003,8 @@
       (insert column)
       (message "%s" column))))
 
-;; On NT, SQL*Plus for Oracle turns on full buffering for stdout if it
-;; is not attached to a character device; therefore placeholder
+;; On Windows, SQL*Plus for Oracle turns on full buffering for stdout
+;; if it is not attached to a character device; therefore placeholder
 ;; replacement by SQL*Plus is fully buffered.  The workaround lets
 ;; Emacs query for the placeholders.
 
@@ -2017,8 +2013,9 @@
 
 (defun sql-query-placeholders-and-send (proc string)
   "Send to PROC input STRING, maybe replacing placeholders.
-Placeholders are words starting with and ampersand like &this.
-This function is used for `comint-input-sender' if using `sql-oracle' on NT."
+Placeholders are words starting with an ampersand like &this.
+This function is used for `comint-input-sender' if using
+`sql-oracle' on Windows."
   (while (string-match "&\\(\\sw+\\)" string)
     (setq string (replace-match
 		  (read-from-minibuffer
@@ -2104,7 +2101,7 @@
   "Toggle `sql-pop-to-buffer-after-send-region'.
 
 If given the optional parameter VALUE, sets
-sql-toggle-pop-to-buffer-after-send-region to VALUE."
+`sql-toggle-pop-to-buffer-after-send-region' to VALUE."
   (interactive "P")
   (if value
       (setq sql-pop-to-buffer-after-send-region value)
@@ -2187,8 +2184,8 @@
   "Major mode to use a SQL interpreter interactively.
 
 Do not call this function by yourself.  The environment must be
-initialized by an entry function specific for the SQL interpreter.  See
-`sql-help' for a list of available entry functions.
+initialized by an entry function specific for the SQL interpreter.
+See `sql-help' for a list of available entry functions.
 
 \\[comint-send-input] after the end of the process' output sends the
 text from the end of process to the end of the current line.
@@ -2360,7 +2357,7 @@
 defaults, if set.  Additional command line parameters can be stored in
 the list `sql-oracle-options'.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 To specify a coding system for converting non-ASCII characters
@@ -2392,7 +2389,7 @@
                         (nconc (list parameter) sql-oracle-options)
                       sql-oracle-options))
     (set-buffer (apply 'make-comint "SQL" sql-oracle-program nil parameter))
-    ;; SQL*Plus is buffered on WindowsNT; this handles &placeholders.
+    ;; SQL*Plus is buffered on Windows; this handles &placeholders.
     (if (eq window-system 'w32)
 	(setq comint-input-sender 'sql-query-placeholders-and-send))))
 
@@ -2411,7 +2408,7 @@
 `sql-database' as defaults, if set.  Additional command line parameters
 can be stored in the list `sql-sybase-options'.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 To specify a coding system for converting non-ASCII characters
@@ -2455,7 +2452,7 @@
 Interpreter used comes from variable `sql-informix-program'.  Login uses
 the variable `sql-database' as default, if set.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 To specify a coding system for converting non-ASCII characters
@@ -2494,7 +2491,7 @@
 `sql-server' as defaults, if set.  Additional command line parameters
 can be stored in the list `sql-sqlite-options'.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 To specify a coding system for converting non-ASCII characters
@@ -2538,7 +2535,7 @@
 `sql-server' as defaults, if set.  Additional command line parameters
 can be stored in the list `sql-mysql-options'.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 To specify a coding system for converting non-ASCII characters
@@ -2585,7 +2582,7 @@
 the variables `sql-user', `sql-password', and `sql-server' as
 defaults, if set.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 To specify a coding system for converting non-ASCII characters
@@ -2627,7 +2624,7 @@
 Interpreter used comes from variable `sql-ingres-program'.  Login uses
 the variable `sql-database' as default, if set.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 To specify a coding system for converting non-ASCII characters
@@ -2664,7 +2661,7 @@
 as defaults, if set.  Additional command line parameters can be stored
 in the list `sql-ms-options'.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 To specify a coding system for converting non-ASCII characters
@@ -2717,7 +2714,7 @@
 Additional command line parameters can be stored in the list
 `sql-postgres-options'.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 To specify a coding system for converting non-ASCII characters
@@ -2768,7 +2765,7 @@
 uses the variables `sql-user', `sql-password', and `sql-database' as
 defaults, if set.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 To specify a coding system for converting non-ASCII characters
@@ -2810,7 +2807,7 @@
 Interpreter used comes from variable `sql-db2-program'.  There is not
 automatic login.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 If you use \\[sql-accumulate-and-indent] to send multiline commands to
@@ -2859,7 +2856,7 @@
 for this to work).  If `sql-password' is an empty string, inl will use
 an empty password.
 
-The buffer is put in sql-interactive-mode, giving commands for sending
+The buffer is put in SQL interactive mode, giving commands for sending
 input.  See `sql-interactive-mode'.
 
 \(Type \\[describe-mode] in the SQL buffer for a list of commands.)"

--- a/lisp/url/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/url/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-03  Stefan Monnier  <[e-mail]>
 
 	* url-dired.el (url-dired-minor-mode): Use define-minor-mode.
@@ -62,8 +66,8 @@
 2009-09-12  Chong Yidong  <[e-mail]>
 
 	* url-methods.el (url-scheme--registering-proxy): New variable.
-	(url-scheme-register-proxy, url-scheme-get-property): Avoid
-	calling url-scheme-register-proxy in an infloop (Bug#4191).
+	(url-scheme-register-proxy, url-scheme-get-property):
+	Avoid calling url-scheme-register-proxy in an infloop (Bug#4191).
 
 2009-08-22  Glenn Morris  <[e-mail]>
 

--- a/lisp/vc-hg.el	Sat May 08 11:42:56 2010 -0700
+++ b/lisp/vc-hg.el	Sat May 08 14:47:07 2010 -0400
@@ -168,12 +168,13 @@
                   (condition-case nil
                       ;; Ignore all errors.
 		      (let ((process-environment
-			     ;; Avoid localization of messages so we can parse the output.
-			     (append (list "TERM=dumb" "LANGUAGE=C" "HGRC=") process-environment)))
-
-		      (process-file
-                       "hg" nil t nil
-                       "status" "-A" (file-relative-name file)))
+			     ;; Avoid localization of messages so we
+			     ;; can parse the output.
+			     (append (list "TERM=dumb" "LANGUAGE=C" "HGRCPATH=")
+				     process-environment)))
+			(process-file
+			 "hg" nil t nil
+			 "status" "-A" (file-relative-name file)))
                     ;; Some problem happened.  E.g. We can't find an `hg'
                     ;; executable.
                     (error nil)))))))
@@ -197,7 +198,7 @@
       ((status nil)
        (default-directory (file-name-directory file))
        ;; Avoid localization of messages so we can parse the output.
-       (avoid-local-env (append (list "TERM=dumb" "LANGUAGE=C" "HGRC=")
+       (avoid-local-env (append (list "TERM=dumb" "LANGUAGE=C" "HGRCPATH=")
 				     process-environment))
        (out
         (with-output-to-string
@@ -209,7 +210,7 @@
 			;; Ignore all errors.
 			(process-file
 			 "hg" nil t nil
-			 "parent" "--template" "{rev}" (file-relative-name file)))
+			 "parents" "--template" "{rev}" (file-relative-name file)))
                     ;; Some problem happened.  E.g. We can't find an `hg'
                     ;; executable.
                     (error nil)))))))

--- a/lwlib/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/lwlib/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -3,6 +3,10 @@
 	* xlwmenu.c (XlwMenuDestroy): Remove XtDestroyWidget on subwidgets
 	(Bug #6127).
 
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-06  Glenn Morris  <[e-mail]>
 
 	* Makefile.in (CPP, LN_S, TOP, LN): Remove unused variables.
@@ -28,17 +32,16 @@
 	XlwMenuRedisplay.
 	(display_menu_item): Replace ws->window with ws->pixmap, remove
 	call to XftDrawRect.
-	(display_menu): Remove this and that argument.  Remove
-	just_compute_this_one_p. Fill pixmap at start and copy it to window
-	at end.
+	(display_menu): Remove this and that argument.
+	Remove just_compute_this_one_p. Fill pixmap at start and copy it to
+	window at end.
 	(expose_cb): New function.
 	(make_windows_if_needed): Replace XCreateWindow with XtCreatePopup.
-	Add eventhandler for expose to expose_cb.  Remove creation of
-	xft_draw.
+	Add eventhandler for expose to expose_cb.  Remove creation of xft_draw.
 	(create_pixmap_for_menu): New function.
 	(remap_menubar): Pop down menus that aren't the same as in old_stack.
-	Set width, heigh, x, y on widget with XtVaSetValues.  Call
-	create_pixmap_for_menu.
+	Set width, heigh, x, y on widget with XtVaSetValues.
+	Call create_pixmap_for_menu.
 	Replace XUnmapWindow with XtPopdown.
 	Remowe two last parameters to display_menu.
 	(map_event_to_widget_value, XlwMenuRedisplay, Key, Select)

--- a/msdos/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/msdos/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-08  Glenn Morris  <[e-mail]>
 
 	* sed1v2.inp (LIBS_TERMCAP): Edit to empty.

--- a/nextstep/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/nextstep/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-03-10  Chong Yidong  <[e-mail]>
 
 	* Branch for 23.2.

--- a/nt/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/nt/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-04  Glenn Morris  <[e-mail]>
 
 	* config.nt (LD_SWITCH_X_SITE_AUX): Remove.
@@ -55,8 +59,8 @@
 
 2009-01-26  Jason Rumney  <[e-mail]>
 
-	* emacsclient.rc, emacs.rc: Swap name and description.  Remove
-	Windows versions.
+	* emacsclient.rc, emacs.rc: Swap name and description.
+	Remove Windows versions.
 
 2009-01-15  Jason Rumney  <[e-mail]>
 

--- a/oldXMenu/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/oldXMenu/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,15 +1,19 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-05-06  Glenn Morris  <[e-mail]>
 
 	* Makefile.in (RANLIB): Let configure set it.
-	(libXMenu11.a): configure sets RANLIB = : on systems without it.
+	(libXMenu11.a): Configure sets RANLIB = : on systems without it.
 
 	* Makefile.in (CPP, LN_S, AS, LD, MV, LS, LINTOPTS, LINTLIBFLAG, MAKE)
 	(STD_DEFINES, CDEBUGFLAGS, RM_CMD): Remove unused variables.
 
 2010-05-04  Glenn Morris  <[e-mail]>
 
-	* Makefile.in (C_SWITCH_SYSTEM, C_SWITCH_MACHINE): Use
-	@C_SWITCH_SYSTEM@, @C_SWITCH_MACHINE@ rather than
+	* Makefile.in (C_SWITCH_SYSTEM, C_SWITCH_MACHINE):
+	Use @C_SWITCH_SYSTEM@, @C_SWITCH_MACHINE@ rather than
 	@c_switch_system@, @c_switch_machine@.
 
 2010-04-27  Dan Nicolaescu  <[e-mail]>

--- a/src/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/src/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,31 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
[phone]  Andreas Schwab  <[e-mail]>
+
+	* composite.c (autocmp_chars): Save point as marker before calling
+	auto-composition-function (Bug#5984).
+
+	* lisp.h (restore_point_unwind): Add prototype.
+
+	* fileio.c (restore_point_unwind): Remove static attribute.
+
[phone]  Kenichi Handa  <[e-mail]>
+
+	* ftfont.c (M17N_FLT_USE_NEW_FEATURE): Define it if we can use the
+	new feature of libotf and m17n-flt.
+	(ftfont_check_otf) [M17N_FLT_USE_NEW_FEATURE]:
+	Call OTF_check_features even if no specific feature is given.
+	(PACK_OTF_TAG) [M17N_FLT_USE_NEW_FEATURE]: New macro.
+	(ftfont_drive_otf) [M17N_FLT_USE_NEW_FEATURE]: Handle the case
+	that OUT is NULL.  Use OTF_drive_gsub_with_log and
+	OTF_drive_gpos_with_log instead of OTF_drive_gsub and
+	OTF_drive_gpos.
+	(ftfont_try_otf) [M17N_FLT_USE_NEW_FEATURE]: New function.
+	(ftfont_shape_by_flt) [M17N_FLT_USE_NEW_FEATURE]:
+	Setup mflt_enable_new_feature and mflt_try_otf.
+
 2010-05-08  Jan Djärv  <[e-mail]>
 
 	* xsettings.c (Ftool_bar_get_system_style): Correct comment.

--- a/src/composite.c	Sat May 08 11:42:56 2010 -0700
+++ b/src/composite.c	Sat May 08 14:47:07 2010 -0400
@@ -990,6 +990,14 @@
 	    {
 	      Lisp_Object args[6];
 
+	      /* Save point as marker before calling out to lisp.  */
+	      if (NILP (string))
+		{
+		  Lisp_Object m = Fmake_marker ();
+		  set_marker_both (m, Qnil, pt, pt_byte);
+		  record_unwind_protect (restore_point_unwind, m);
+		}
+
 	      args[0] = Vauto_composition_function;
 	      args[1] = AREF (elt, 2);
 	      args[2] = pos;
@@ -998,8 +1006,10 @@
 	      args[5] = string;
 	      gstring = safe_call (6, args);
 	    }
-	  if (NILP (string))
-	    TEMP_SET_PT_BOTH (pt, pt_byte);
+	  else if (NILP (string))
+	    {
+	      TEMP_SET_PT_BOTH (pt, pt_byte);
+	    }
 	  return unbind_to (count, gstring);
 	}
     }

--- a/src/fileio.c	Sat May 08 11:42:56 2010 -0700
+++ b/src/fileio.c	Sat May 08 14:47:07 2010 -0400
@@ -299,7 +299,7 @@
 
 /* Restore point, having saved it as a marker.  */
 
-static Lisp_Object
+Lisp_Object
 restore_point_unwind (location)
      Lisp_Object location;
 {

--- a/src/ftfont.c	Sat May 08 11:42:56 2010 -0700
+++ b/src/ftfont.c	Sat May 08 14:47:07 2010 -0400
@@ -1578,6 +1578,14 @@
 
 #ifdef HAVE_M17N_FLT
 
+#if ((LIBOTF_MAJOR_VERSION > 1) || (LIBOTF_RELEASE_NUMBER >= 10) \
+     && (M17NLIB_MAJOR_VERSION > 1) || (M17NLIB_MINOR_VERSION >= 6))
+/* We can use the new feature of libotf and m17n-flt to handle the
+   character encoding scheme introduced in Unicode 5.1 and 5.2 for
+   some Agian scripts.  */
+#define M17N_FLT_USE_NEW_FEATURE
+#endif
+
 struct MFLTFontFT
 {
   MFLTFont flt_font;
@@ -1696,10 +1704,16 @@
 	  else
 	    tags[n] = spec->features[i][n];
 	}
+#ifdef M17N_FLT_USE_NEW_FEATURE
+      if (OTF_check_features (otf, i == 0, spec->script, spec->langsys,
+			      tags, n - negative) != 1)
+	return 0;
+#else  /* not M17N_FLT_USE_NEW_FEATURE */
       if (n - negative > 0
 	  && OTF_check_features (otf, i == 0, spec->script, spec->langsys,
 				 tags, n - negative) != 1)
 	return 0;
+#endif	/* not M17N_FLT_USE_NEW_FEATURE */
     }
   return 1;
 }
@@ -1757,6 +1771,356 @@
   memset (otf_gstring.glyphs, 0, sizeof (OTF_Glyph) * size);
 }
 
+#ifdef M17N_FLT_USE_NEW_FEATURE
+
+/* Pack 32-bit OTF tag (0x7F7F7F7F) into 28-bit (0x0FFFFFFF).  */
+#define PACK_OTF_TAG(TAG)	\
+  ((((TAG) & 0x7F000000) >> 3)	\
+    | (((TAG) & 0x7F0000) >> 2)	\
+    | (((TAG) & 0x7F00) >> 1)	\
+    | ((TAG) & 0x7F))
+
+/* Assuming that FONT is an OpenType font, apply OpenType features
+   specified in SPEC on glyphs between FROM and TO of IN, and record
+   the lastly applied feature in each glyph of IN.  If OUT is not
+   NULL, append the resulting glyphs to OUT while storing glyph
+   position adjustment information in ADJUSTMENT.  */
+
+static int
+ftfont_drive_otf (font, spec, in, from, to, out, adjustment)
+     MFLTFont *font;
+     MFLTOtfSpec *spec;
+     MFLTGlyphString *in;
+     int from, to;
+     MFLTGlyphString *out;
+     MFLTGlyphAdjustment *adjustment;
+{
+  struct MFLTFontFT *flt_font_ft = (struct MFLTFontFT *) font;
+  FT_Face ft_face = flt_font_ft->ft_face;
+  OTF *otf = flt_font_ft->otf;
+  int len = to - from;
+  int i, j, gidx;
+  OTF_Glyph *otfg;
+  char script[5], *langsys = NULL;
+  char *gsub_features = NULL, *gpos_features = NULL;
+  OTF_Feature *features;
+
+  if (len == 0)
+    return from;
+  OTF_tag_name (spec->script, script);
+  if (spec->langsys)
+    {
+      langsys = alloca (5);
+      OTF_tag_name (spec->langsys, langsys);
+    }
+  for (i = 0; i < 2; i++)
+    {
+      char *p;
+
+      if (spec->features[i] && spec->features[i][1] != 0xFFFFFFFF)
+	{
+	  for (j = 0; spec->features[i][j]; j++);
+	  if (i == 0)
+	    p = gsub_features = alloca (6 * j);
+	  else
+	    p = gpos_features = alloca (6 * j);
+	  for (j = 0; spec->features[i][j]; j++)
+	    {
+	      if (spec->features[i][j] == 0xFFFFFFFF)
+		*p++ = '*', *p++ = ',';
+	      else
+		{
+		  OTF_tag_name (spec->features[i][j], p);
+		  p[4] = ',';
+		  p += 5;
+		}
+	    }
+	  *--p = '\0';
+	}
+    }
+
+  setup_otf_gstring (len);
+  for (i = 0; i < len; i++)
+    {
+      otf_gstring.glyphs[i].c = in->glyphs[from + i].c;
+      otf_gstring.glyphs[i].glyph_id = in->glyphs[from + i].code;
+    }
+
+  OTF_drive_gdef (otf, &otf_gstring);
+  gidx = out ? out->used : from;
+
+  if (gsub_features && out)
+    {
+      if (OTF_drive_gsub_with_log (otf, &otf_gstring, script, langsys,
+				   gsub_features) < 0)
+	goto simple_copy;
+      if (out->allocated < out->used + otf_gstring.used)
+	return -2;
+      features = otf->gsub->FeatureList.Feature;
+      for (i = 0, otfg = otf_gstring.glyphs; i < otf_gstring.used; )
+	{
+	  MFLTGlyph *g;
+	  int min_from, max_to;
+	  int j;
+	  int feature_idx = otfg->positioning_type >> 4;
+
+	  g = out->glyphs + out->used;
+	  *g = in->glyphs[from + otfg->f.index.from];
+	  if (g->code != otfg->glyph_id)
+	    {
+	      g->c = 0;
+	      g->code = otfg->glyph_id;
+	      g->measured = 0;
+	    }
+	  out->used++;
+	  min_from = g->from;
+	  max_to = g->to;
+	  if (otfg->f.index.from < otfg->f.index.to)
+	    {
+	      /* OTFG substitutes multiple glyphs in IN.  */
+	      for (j = from + otfg->f.index.from + 1;
+		   j <= from + otfg->f.index.to; j++)
+		{
+		  if (min_from > in->glyphs[j].from)
+		    min_from = in->glyphs[j].from;
+		  if (max_to < in->glyphs[j].to)
+		    max_to = in->glyphs[j].to;
+		}
+	      g->from = min_from;
+	      g->to = max_to;
+	    }
+	  if (feature_idx)
+	    {
+	      unsigned int tag = features[feature_idx - 1].FeatureTag;
+	      tag = PACK_OTF_TAG (tag);
+	      g->internal = (g->internal & ~0x1FFFFFFF) | tag;
+	    }
+	  for (i++, otfg++; (i < otf_gstring.used
+			     && otfg->f.index.from == otfg[-1].f.index.from);
+	       i++, otfg++)
+	    {
+	      g = out->glyphs + out->used;
+	      *g = in->glyphs[from + otfg->f.index.to];
+	      if (g->code != otfg->glyph_id)
+		{
+		  g->c = 0;
+		  g->code = otfg->glyph_id;
+		  g->measured = 0;
+		}
+	      feature_idx = otfg->positioning_type >> 4;
+	      if (feature_idx)
+		{
+		  unsigned int tag = features[feature_idx - 1].FeatureTag;
+		  tag = PACK_OTF_TAG (tag);
+		  g->internal = (g->internal & ~0x1FFFFFFF) | tag;
+		}
+	      out->used++;
+	    }
+	}
+    }
+  else if (gsub_features)
+    {
+      /* Just for checking which features will be applied.  */
+      if (OTF_drive_gsub_with_log (otf, &otf_gstring, script, langsys,
+				   gsub_features) < 0)
+	goto simple_copy;
+      features = otf->gsub->FeatureList.Feature;
+      for (i = 0, otfg = otf_gstring.glyphs; i < otf_gstring.used; i++,
+	     otfg++)
+	{
+	  int feature_idx = otfg->positioning_type >> 4;
+
+	  if (feature_idx)
+	    {
+	      unsigned int tag = features[feature_idx - 1].FeatureTag;
+	      tag = PACK_OTF_TAG (tag);
+	      for (j = otfg->f.index.from; j <= otfg->f.index.to; j++)
+		{
+		  MFLTGlyph *g = in->glyphs + (from + j);
+		  g->internal = (g->internal & ~0x1FFFFFFF) | tag;
+		}
+	    }
+	}
+    }
+  else if (out)
+    {
+      if (out->allocated < out->used + len)
+	return -2;
+      for (i = 0; i < len; i++)
+	out->glyphs[out->used++] = in->glyphs[from + i];
+    }
+
+  if (gpos_features && out)
+    {
+      MFLTGlyph *base = NULL, *mark = NULL, *g;
+      int x_ppem, y_ppem, x_scale, y_scale;
+
+      if (OTF_drive_gpos_with_log (otf, &otf_gstring, script, langsys,
+				   gpos_features) < 0)
+	return to;
+      features = otf->gpos->FeatureList.Feature;
+      x_ppem = ft_face->size->metrics.x_ppem;
+      y_ppem = ft_face->size->metrics.y_ppem;
+      x_scale = ft_face->size->metrics.x_scale;
+      y_scale = ft_face->size->metrics.y_scale;
+
+      for (i = 0, otfg = otf_gstring.glyphs, g = out->glyphs + gidx;
+	   i < otf_gstring.used; i++, otfg++, g++)
+	{
+	  MFLTGlyph *prev;
+	  int feature_idx = otfg->positioning_type >> 4;
+
+	  if (feature_idx)
+	    {
+	      unsigned int tag = features[feature_idx - 1].FeatureTag;
+	      tag = PACK_OTF_TAG (tag);
+	      g->internal = (g->internal & ~0x1FFFFFFF) | tag;
+	    }
+
+	  if (! otfg->glyph_id)
+	    continue;
+	  switch (otfg->positioning_type & 0xF)
+	    {
+	    case 0:
+	      break;
+	    case 1: 		/* Single */
+	    case 2: 		/* Pair */
+	      {
+		int format = otfg->f.f1.format;
+
+		if (format & OTF_XPlacement)
+		  adjustment[i].xoff
+		    = otfg->f.f1.value->XPlacement * x_scale / 0x10000;
+		if (format & OTF_XPlaDevice)
+		  adjustment[i].xoff
+		    += DEVICE_DELTA (otfg->f.f1.value->XPlaDevice, x_ppem);
+		if (format & OTF_YPlacement)
+		  adjustment[i].yoff
+		    = - (otfg->f.f1.value->YPlacement * y_scale / 0x10000);
+		if (format & OTF_YPlaDevice)
+		  adjustment[i].yoff
+		    -= DEVICE_DELTA (otfg->f.f1.value->YPlaDevice, y_ppem);
+		if (format & OTF_XAdvance)
+		  adjustment[i].xadv
+		    += otfg->f.f1.value->XAdvance * x_scale / 0x10000;
+		if (format & OTF_XAdvDevice)
+		  adjustment[i].xadv
+		    += DEVICE_DELTA (otfg->f.f1.value->XAdvDevice, x_ppem);
+		if (format & OTF_YAdvance)
+		  adjustment[i].yadv
+		    += otfg->f.f1.value->YAdvance * y_scale / 0x10000;
+		if (format & OTF_YAdvDevice)
+		  adjustment[i].yadv
+		    += DEVICE_DELTA (otfg->f.f1.value->YAdvDevice, y_ppem);
+		adjustment[i].set = 1;
+	      }
+	      break;
+	    case 3:		/* Cursive */
+	      /* Not yet supported.  */
+	      break;
+	    case 4:		/* Mark-to-Base */
+	    case 5:		/* Mark-to-Ligature */
+	      if (! base)
+		break;
+	      prev = base;
+	      goto label_adjust_anchor;
+	    default:		/* i.e. case 6 Mark-to-Mark */
+	      if (! mark)
+		break;
+	      prev = mark;
+
+	    label_adjust_anchor:
+	      {
+		int base_x, base_y, mark_x, mark_y;
+		int this_from, this_to;
+
+		base_x = otfg->f.f4.base_anchor->XCoordinate * x_scale / 0x10000;
+		base_y = otfg->f.f4.base_anchor->YCoordinate * y_scale / 0x10000;
+		mark_x = otfg->f.f4.mark_anchor->XCoordinate * x_scale / 0x10000;
+		mark_y = otfg->f.f4.mark_anchor->YCoordinate * y_scale / 0x10000;
+
+		if (otfg->f.f4.base_anchor->AnchorFormat != 1)
+		  adjust_anchor (ft_face, otfg->f.f4.base_anchor,
+				 prev->code, x_ppem, y_ppem, &base_x, &base_y);
+		if (otfg->f.f4.mark_anchor->AnchorFormat != 1)
+		  adjust_anchor (ft_face, otfg->f.f4.mark_anchor, g->code,
+				 x_ppem, y_ppem, &mark_x, &mark_y);
+		adjustment[i].xoff = (base_x - mark_x);
+		adjustment[i].yoff = - (base_y - mark_y);
+		adjustment[i].back = (g - prev);
+		adjustment[i].xadv = 0;
+		adjustment[i].advance_is_absolute = 1;
+		adjustment[i].set = 1;
+		this_from = g->from;
+		this_to = g->to;
+		for (j = 0; prev + j < g; j++)
+		  {
+		    if (this_from > prev[j].from)
+		      this_from = prev[j].from;
+		    if (this_to < prev[j].to)
+		      this_to = prev[j].to;
+		  }
+		for (; prev <= g; prev++)
+		  {
+		    prev->from = this_from;
+		    prev->to = this_to;
+		  }
+	      }
+	    }
+	  if (otfg->GlyphClass == OTF_GlyphClass0)
+	    base = mark = g;
+	  else if (otfg->GlyphClass == OTF_GlyphClassMark)
+	    mark = g;
+	  else
+	    base = g;
+	}
+    }
+  else if (gpos_features)
+    {
+      if (OTF_drive_gpos_with_log (otf, &otf_gstring, script, langsys,
+				   gpos_features) < 0)
+	return to;
+      features = otf->gpos->FeatureList.Feature;
+      for (i = 0, otfg = otf_gstring.glyphs; i < otf_gstring.used;
+	   i++, otfg++)
+	if (otfg->positioning_type & 0xF)
+	  {
+	    int feature_idx = otfg->positioning_type >> 4;
+
+	    if (feature_idx)
+	      {
+		unsigned int tag = features[feature_idx - 1].FeatureTag;
+		tag = PACK_OTF_TAG (tag);
+		for (j = otfg->f.index.from; j <= otfg->f.index.to; j++)
+		  {
+		    MFLTGlyph *g = in->glyphs + (from + j);
+		    g->internal = (g->internal & ~0x1FFFFFFF) | tag;
+		  }
+	      }
+	  }
+    }
+  return to;
+
+ simple_copy:
+  if (! out)
+    return to;
+  if (out->allocated < out->used + len)
+    return -2;
+  font->get_metrics (font, in, from, to);
+  memcpy (out->glyphs + out->used, in->glyphs + from,
+	  sizeof (MFLTGlyph) * len);
+  out->used += len;
+  return to;
+}
+
+static int 
+ftfont_try_otf (MFLTFont *font, MFLTOtfSpec *spec,
+		MFLTGlyphString *in, int from, int to)
+{
+  return ftfont_drive_otf (font, spec, in, from, to, NULL, NULL);
+}
+
+#else  /* not M17N_FLT_USE_NEW_FEATURE */
 
 static int
 ftfont_drive_otf (font, spec, in, from, to, out, adjustment)
@@ -2011,6 +2375,8 @@
   return to;
 }
 
+#endif	/* not M17N_FLT_USE_NEW_FEATURE */
+
 static MFLTGlyphString gstring;
 
 static int m17n_flt_initialized;
@@ -2034,6 +2400,10 @@
   if (! m17n_flt_initialized)
     {
       M17N_INIT ();
+#ifdef M17N_FLT_USE_NEW_FEATURE
+      mflt_enable_new_feature = 1;
+      mflt_try_otf = ftfont_try_otf;
+#endif	/* M17N_FLT_USE_NEW_FEATURE */
       m17n_flt_initialized = 1;
     }
 

--- a/src/lisp.h	Sat May 08 11:42:56 2010 -0700
+++ b/src/lisp.h	Sat May 08 14:47:07 2010 -0400
@@ -3059,6 +3059,7 @@
 EXFUN (Ffile_executable_p, 1);
 EXFUN (Fread_file_name, 6);
 extern Lisp_Object close_file_unwind P_ ((Lisp_Object));
+extern Lisp_Object restore_point_unwind P_ ((Lisp_Object));
 extern void report_file_error P_ ((const char *, Lisp_Object)) NO_RETURN;
 extern int internal_delete_file P_ ((Lisp_Object, Lisp_Object));
 extern void syms_of_fileio P_ ((void));

--- a/test/ChangeLog	Sat May 08 11:42:56 2010 -0700
+++ b/test/ChangeLog	Sat May 08 14:47:07 2010 -0400
@@ -1,3 +1,7 @@
[phone]  Chong Yidong  <[e-mail]>
+
+	* Version 23.2 released.
+
 2010-03-29  Chong Yidong  <[e-mail]>
 
 	* cedet/semantic-ia-utest.el