Mercurial > emacs

--- a/src/ChangeLog	Wed Jul 16 07:18:26 2008 +0000
+++ b/src/ChangeLog	Wed Jul 16 07:26:30 2008 +0000
@@ -1,5 +1,15 @@
 2008-07-16  Dan Nicolaescu  <dann@ics.uci.edu>

+	* m/ibms390.h:
+	* m/intel386.h:
+	* m/m68k.h:
+	* s/bsd-common.h:
+	* s/cygwin.h:
+	* s/darwin.h:
+	* s/freebsd.h:
+	* s/gnu.h:
+	* s/msdos.h: Remove boilerplate comments.
+
 	* m/iris4d.h: Remove boilerplate comments and code for systems that
 	 do not use this file.
 	(IRIS_4D): Remove, unused.
--- a/src/m/ibms390.h	Wed Jul 16 07:18:26 2008 +0000
+++ b/src/m/ibms390.h	Wed Jul 16 07:26:30 2008 +0000
@@ -48,12 +48,6 @@

 #define LOAD_AVE_CVT(x) (int) (((double) (x)) * 100.0 / FSCALE)

-/* Define CANNOT_DUMP on machines where unexec does not work.
-   Then the function dump-emacs will not be defined
-   and temacs will do (load "loadup") automatically unless told otherwise.  */
-
-/* #define CANNOT_DUMP */
-
 /* Define VIRT_ADDR_VARIES if the virtual addresses of
    pure and impure space as loaded can vary, and even their
    relative order cannot be relied on.
--- a/src/m/intel386.h	Wed Jul 16 07:18:26 2008 +0000
+++ b/src/m/intel386.h	Wed Jul 16 07:26:30 2008 +0000
@@ -29,22 +29,9 @@
   isc2-2, 386-ix, and linux.

   18.58 should support a wide variety of operating systems.
-  Use isc2-2 for Interactive 386/ix version 2.2.
-  Use 386ix for prior versions.
   Use linux for Linux.
   It isn't clear what to do on an SCO system.

-  -machine=is386 is used for an Integrated Solutions 386 machine.
-  It may also be correct for Microport systems.
-
-Cubix QBx/386 (-machine=intel386 -opsystem=usg5-3)
-
-  Changes merged in 19.1.  Systems before 2/A/0 may fail to compile etags.c
-  due to a compiler bug.
-
-Prime EXL (-machine=intel386 -opsystem=usg5-3)
-
-  Minor changes merged in 19.1.
 NOTE-END */

 /* Define WORDS_BIG_ENDIAN if lowest-numbered byte in a word
@@ -67,7 +54,6 @@

 #define DOT_GLOBAL_START

-#ifdef SOLARIS2
 /* Data type of load average, as read out of kmem.  */
 #define LOAD_AVE_TYPE long

@@ -75,49 +61,26 @@
 /* This is totally uncalibrated. */
 #define LOAD_AVE_CVT(x) ((int) (((double) (x)) * 100.0 / FSCALE))

+#ifdef SOLARIS2
 /* J.W.Hawtin@lut.ac.uk say Solaris 2.4 as well as Solaris 2.1 on X86
    requires -lkvm as well.
    And handa@etl.gov.jp says that -lkvm needs -llelf, at least on 2.5.  */
 #define LIBS_MACHINE -lkvm -lelf
-
 /* configure thinks solaris X86 has gethostname, but it does not work,
    so undefine it.  */
 #undef HAVE_GETHOSTNAME
-
 #else /* not SOLARIS2 */
 #ifdef USG5_4 /* Older USG systems do not support the load average.  */
-/* Data type of load average, as read out of kmem.  */
-
-#define LOAD_AVE_TYPE long
-
-/* Convert that into an integer that is 100 for a load average of 1.0  */
-/* This is totally uncalibrated. */
-
-#define LOAD_AVE_CVT(x) ((int) (((double) (x)) * 100.0 / FSCALE))
 #define FSCALE 256.0
 #endif
 #endif /* not SOLARIS2 */

-/* Define CANNOT_DUMP on machines where unexec does not work.
-   Then the function dump-emacs will not be defined
-   and temacs will do (load "loadup") automatically unless told otherwise.  */
-
-/* #define CANNOT_DUMP */
-
-/* Define VIRT_ADDR_VARIES if the virtual addresses of
-   pure and impure space as loaded can vary, and even their
-   relative order cannot be relied on.
-
-   Otherwise Emacs assumes that text space precedes data space,
-   numerically.  */
-
-/* #define VIRT_ADDR_VARIES */
-
 /* this brings in alloca() if we're using cc */
 #ifdef USG
 #ifndef LIB_STANDARD
 #ifdef USG5_4
 #define LIB_STANDARD -lc
+#define DATA_SEG_BITS 0x08000000
 #else /* not USG5_4 */
 #define LIB_STANDARD -lPW -lc
 #endif /* not USG5_4 */
@@ -127,10 +90,6 @@
 #define TEXT_START 0
 #endif /* USG */

-#ifdef USG5_4
-#define DATA_SEG_BITS 0x08000000
-#endif
-
 #ifdef MSDOS
 #define NO_REMAP
 #endif
--- a/src/m/m68k.h	Wed Jul 16 07:18:26 2008 +0000
+++ b/src/m/m68k.h	Wed Jul 16 07:26:30 2008 +0000
@@ -47,12 +47,6 @@

 #define EXPLICIT_SIGN_EXTEND

-/* Define CANNOT_DUMP on machines where unexec does not work.
-   Then the function dump-emacs will not be defined
-   and temacs will do (load "loadup") automatically unless told otherwise.  */
-
-/* #define CANNOT_DUMP */
-
 /* Define VIRT_ADDR_VARIES if the virtual addresses of
    pure and impure space as loaded can vary, and even their
    relative order cannot be relied on.
--- a/src/s/bsd-common.h	Wed Jul 16 07:18:26 2008 +0000
+++ b/src/s/bsd-common.h	Wed Jul 16 07:26:30 2008 +0000
@@ -38,12 +38,6 @@

 #define SYSTEM_TYPE "berkeley-unix"

-/* nomultiplejobs should be defined if your system's shell
- does not have "job control" (the ability to stop a program,
- run some other program, then continue the first one).  */
-
-/* #define NOMULTIPLEJOBS */
-
 /* Do not use interrupt_input = 1 by default, because in 4.3
    we can make noninterrupt input work properly.  */

@@ -63,13 +57,6 @@

 #define HAVE_SOCKETS

-/*
- *	Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
- *      The 4.2 opendir, etc., library functions.
- */
-
-/* #define NONSYSTEM_DIR_LIBRARY */
-
 /* Define this symbol if your system has the functions bcopy, etc. */

 #define BSTRING
@@ -82,11 +69,6 @@

 #define subprocesses

-/* If your system uses COFF (Common Object File Format) then define the
-   preprocessor symbol "COFF". */
-
-/* #define COFF */
-
 /* define MAIL_USE_FLOCK if the mailer uses flock
    to interlock access to /usr/spool/mail/$USER.
    The alternative is that a lock file named
--- a/src/s/cygwin.h	Wed Jul 16 07:18:26 2008 +0000
+++ b/src/s/cygwin.h	Wed Jul 16 07:26:30 2008 +0000
@@ -126,8 +126,6 @@
 #define TERMINFO

 #define HAVE_SOCKETS
-/* C-g aborts emacs without this */
-/*#define HAVE_VFORK*/
 /* Xaw3d causes problems -- might have been fixed by NARROWPROTO
    above, but I haven't tried it */
 /*#undef HAVE_XAW3D*/
--- a/src/s/darwin.h	Wed Jul 16 07:18:26 2008 +0000
+++ b/src/s/darwin.h	Wed Jul 16 07:26:30 2008 +0000
@@ -25,8 +25,6 @@

 #define BSD4_2
 /* BSD4_3 and BSD4_4 are already defined in sys/param.h */
-/* #define BSD4_3 */
-/* #define BSD4_4 */
 #define BSD_SYSTEM
 /* #define VMS */

@@ -46,12 +44,6 @@

 #define SYSTEM_TYPE "darwin"

-/* NOMULTIPLEJOBS should be defined if your system's shell
- does not have "job control" (the ability to stop a program,
- run some other program, then continue the first one).  */
-
-/* #define NOMULTIPLEJOBS */
-
 /* Emacs can read input using SIGIO and buffering characters itself,
    or using CBREAK mode and making C-g cause SIGINT.
    The choice is controlled by the variable interrupt_input.
@@ -111,13 +103,6 @@
  */
 #define MIN_PTY_KERNEL_VERSION '7'

-/*
- *	Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
- *      The 4.2 opendir, etc., library functions.
- */
-
-/* #define NONSYSTEM_DIR_LIBRARY */
-
 /* Define this symbol if your system has the functions bcopy, etc. */

 #define BSTRING
@@ -130,11 +115,6 @@

 #define subprocesses

-/* If your system uses COFF (Common Object File Format) then define the
-   preprocessor symbol "COFF". */
-
-/* #define COFF */
-
 /* define MAIL_USE_FLOCK if the mailer uses flock
    to interlock access to /usr/spool/mail/$USER.
    The alternative is that a lock file named
@@ -148,22 +128,6 @@

 #define CLASH_DETECTION

-/* Define this if your operating system declares signal handlers to
-   have a type other than the usual.  `The usual' is `void' for ANSI C
-   systems (i.e. when the __STDC__ macro is defined), and `int' for
-   pre-ANSI systems.  If you're using GCC on an older system, __STDC__
-   will be defined, but the system's include files will still say that
-   signal returns int or whatever; in situations like that, define
-   this to be what the system's include files want.  */
-/* #define SIGTYPE int */
-
-/* If the character used to separate elements of the executable path
-   is not ':', #define this to be the appropriate character constant.  */
-/* #define SEPCHAR ':' */
-
-/* Define this if the system can use mmap for buffer text allocation.  */
-/* #define USE_MMAP_FOR_BUFFERS 1 */
-
 /* ============================================================ */

 /* Here, add any special hacks needed
@@ -173,21 +137,6 @@
    your system and must be used only through an encapsulation
    (Which you should place, by convention, in sysdep.c).  */

-/* Some compilers tend to put everything declared static
-   into the initialized data area, which becomes pure after dumping Emacs.
-   On these systems, you must #define static as nothing to foil this.
-   Note that emacs carefully avoids static vars inside functions.  */
-
-/* #define static */
-
-/* If the system's imake configuration file defines `NeedWidePrototypes'
-   as `NO', we must define NARROWPROTO manually.  Such a define is
-   generated in the Makefile generated by `xmkmf'.  If we don't
-   define NARROWPROTO, we will see the wrong function prototypes
-   for X functions taking float or double parameters.  */
-
-/*  #define NARROWPROTO 1 */
-
 /* ============================================================ */

 /* After adding support for a new system, modify the large case
--- a/src/s/freebsd.h	Wed Jul 16 07:18:26 2008 +0000
+++ b/src/s/freebsd.h	Wed Jul 16 07:26:30 2008 +0000
@@ -134,12 +134,6 @@
    ioctl TIOCSCTTY.  */
 #define DONT_REOPEN_PTY

-/* CLASH_DETECTION is defined in bsd-common.h.
-   In FreeBSD 2.1.5 (and other 2.1.x), this results useless symbolic links
-   remaining in /tmp or other directories with +t bit.
-   To avoid this problem, you could #undef it to use no file lock. */
-/* #undef CLASH_DETECTION */
-
 /* If the system's imake configuration file defines `NeedWidePrototypes'
    as `NO', we must define NARROWPROTO manually.  Such a define is
    generated in the Makefile generated by `xmkmf'.  If we don't
--- a/src/s/gnu.h	Wed Jul 16 07:18:26 2008 +0000
+++ b/src/s/gnu.h	Wed Jul 16 07:26:30 2008 +0000
@@ -27,8 +27,6 @@
 #undef SYSTEM_TYPE
 #define SYSTEM_TYPE "gnu"

-/* XXX should getloadavg be in libc?  Should we have a libutil?
-#define HAVE_GETLOADAVG */
 #undef NLIST_STRUCT
 #undef KERNEL_FILE
 #undef LDAV_SYMBOL
--- a/src/s/msdos.h	Wed Jul 16 07:18:26 2008 +0000
+++ b/src/s/msdos.h	Wed Jul 16 07:26:30 2008 +0000
@@ -55,44 +55,6 @@

 #define NOMULTIPLEJOBS

-/* Emacs can read input using SIGIO and buffering characters itself,
-   or using CBREAK mode and making C-g cause SIGINT.
-   The choice is controlled by the variable interrupt_input.
-   Define INTERRUPT_INPUT to make interrupt_input = 1 the default (use SIGIO)
-
-   SIGIO can be used only on systems that implement it (4.2 and 4.3).
-   CBREAK mode has two disadvantages
-     1) At least in 4.2, it is impossible to handle the Meta key properly.
-        I hear that in system V this problem does not exist.
-     2) Control-G causes output to be discarded.
-        I do not know whether this can be fixed in system V.
-
-   Another method of doing input is planned but not implemented.
-   It would have Emacs fork off a separate process
-   to read the input and send it to the true Emacs process
-   through a pipe.
-*/
-
-/* #define INTERRUPT_INPUT */
-
-/* Letter to use in finding device name of first pty,
-  if system supports pty's.  'a' means it is /dev/ptya0  */
-
-/* #define FIRST_PTY_LETTER 'a' */
-
-/*
- *	Define HAVE_PTYS if the system supports pty devices.
- */
-
-/* #define HAVE_PTYS */
-
-/*
- *	Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
- *      The 4.2 opendir, etc., library functions.
- */
-
-/* #define NONSYSTEM_DIR_LIBRARY */
-
 #define SYSV_SYSTEM_DIR

 /* Define this symbol if your system has the functions bcopy, etc. */
@@ -116,19 +78,6 @@

 #define COFF

-/* define MAIL_USE_FLOCK if the mailer uses flock
-   to interlock access to /usr/spool/mail/$USER.
-   The alternative is that a lock file named
-   /usr/spool/mail/$USER.lock.  */
-
-/* #define MAIL_USE_FLOCK */
-
-/* Define CLASH_DETECTION if you want lock files to be written
-   so that Emacs can tell instantly when you try to modify
-   a file that someone else has modified in his Emacs.  */
-
-/* #define CLASH_DETECTION */
-
 /* Here, on a separate page, add any special hacks needed
    to make Emacs work on this system.  For example,
    you might define certain system call names that don't