changeset 27210:ac3a8cb1ce25

PostScript <- Postscript. Add bothner's Term doc. Mention Handwrite. Add crisp-mode, scroll-all-mode, pc-bindings-mode, pc-selection-mode, wordstar-mode, 5x5, lm, life, solitaire, tetris, snake.
author Dave Love <fx@gnu.org>
date Wed, 05 Jan 2000 23:14:12 +0000
parents b6dec6562153
children 0699f691fac1
files man/misc.texi
diffstat 1 files changed, 252 insertions(+), 26 deletions(-) [+]
line wrap: on
line diff
--- a/man/misc.texi	Wed Jan 05 23:08:00 2000 +0000
+++ b/man/misc.texi	Wed Jan 05 23:14:12 2000 +0000
@@ -1,5 +1,5 @@
 @c This is part of the Emacs manual.
-@c Copyright (C) 1985, 86, 87, 93, 94, 95, 1997 Free Software Foundation, Inc.
+@c Copyright (C) 1985, 86, 87, 93-95, 97, 2000 Free Software Foundation, Inc.
 @c See file emacs.texi for copying conditions.
 @iftex
 @chapter Miscellaneous Commands
@@ -319,6 +319,10 @@
 @item M-x shell
 Run a subshell with input and output through an Emacs buffer.
 You can then give commands interactively.
+@item M-x term
+Run a subshell with input and output through an Emacs buffer.
+You can then give commands interactively.
+Full terminal emulation is available.
 @end table
 
 @menu
@@ -327,6 +331,9 @@
 * Shell Mode::             Special Emacs commands used with permanent shell.
 * History: Shell History.  Repeating previous commands in a shell buffer.
 * Options: Shell Options.  Options for customizing Shell mode.
+* Terminal emulator::      An Emacs window as a terminal emulator.
+* Term Mode::              Special Emacs commands used in Term mode.
+* Paging in Term::         Paging in the terminal emulator.
 * Remote Host::            Connecting to another computer.
 @end menu
 
@@ -898,6 +905,109 @@
 (@code{shell-pushd-dunique}).  The values you choose should match the
 underlying shell, of course.
 
+@node Terminal emulator
+@subsection Interactive Inferior Shell with Terminal Emulator
+@findex term
+
+  To run a subshell in a terminal emulator, putting its typescript in an Emacs
+buffer, use @kbd{M-x term}.  This creates (or reuses) a buffer named
+@samp{*term*} and runs a subshell with input coming from your keyboard and
+output going to that buffer.
+
+All the normal keys that you type are sent without any interpretation
+by Emacs directly to the subshell, as ``terminal input''.
+Any ``echo'' of your input is the responsibility of the subshell.
+(The exception is the terminal escape character,
+which by default is @kbd{C-c}.  @xref{Term Mode}.)
+Any ``terminal output'' from the subshell goes into the buffer,
+advancing point.
+
+  Some programs (such as Emacs itself) need to control the
+appearance on the terminal screen in detail.  They do this by
+sending special control codes.  The exact control
+codes needed vary from terminal to terminal, but nowadays
+most terminals and terminal emulators (including @code{xterm})
+understand the ANSI-standard (VT100-style) escape sequences.
+Term mode also understands these escape sequences,
+and for each control code does the appropriate thing
+to change the buffer so that the appearance of the window
+matches what it would be on a real terminal.
+Thus you can actually run Emacs inside an Emacs Term window!
+
+   Emacs does not wait for the subshell to do anything.  You can switch
+windows or buffers and edit them while the shell is waiting, or while
+it is running a command.  Output from the subshell waits until Emacs
+has time to process it; this happens whenever Emacs is waiting for
+keyboard input or for time to elapse.
+
+   To make multiple terminal emulators, rename the buffer @samp{*term*}
+to something different using @kbd{M-x rename-uniquely},
+just as with Shell mode.
+
+   The file name used to load the subshell is determined
+the same way as for Shell mode.
+
+Unlike Shell mode, Term mode does not track the current directory
+by examining your input.  Instead, if you use a programmable
+shell, you can have it tell Term what the current directory is.
+This is done automatically by @code{bash} version 1.15 and later.
+
+@node Term Mode
+@subsection Term Mode
+@cindex Term mode
+@cindex mode, Term
+
+  Term uses Term mode, which has two input modes:
+In line mode, Term basically acts like Shell mode.  @xref{Shell Mode}.
+In Char mode, each character is sent directly to the inferior subshell,
+except for the Term escape character, normally @kbd{C-c}.
+
+To switch between line and char mode, use these commands:
+@table @kbd
+@kindex C-c C-k @r{(Term mode)}
+@findex term-char-mode
+@item C-c C-k
+Switch to line mode.  Do nothing if already in line mode.
+
+@kindex C-c C-j @r{(Term mode)}
+@findex term-line-mode
+@item C-c C-j
+Switch to char mode.  Do nothing if already in char mode.
+@end table
+
+The following commands are only available in Char mode:
+@table @kbd
+@item C-c C-c
+Send a literal @key{C-c} to the sub-shell.
+
+@item C-c C-x
+A prefix command to access the global @key{C-x} commands conveniently.
+For example, @kbd{C-c C-x o} invokes the global binding of
+@kbd{C-x o}, which is normally @samp{other-window}.
+@end table
+
+@node Paging in Term
+@subsection Paging in the terminal emulator
+
+Term mode has a pager feature.  When the pager is enabled,
+term mode will pause at the end of each screenful.
+
+@table @kbd
+@kindex C-c C-q @r{(Term mode)}
+@findex term-pager-toggle
+@item C-c C-q
+Toggles the pager feature:  Disables the pager if it is enabled,
+and vice versa.  This works in both line and char modes.
+If the pager enabled, the mode-line contains the word @samp{page}.
+@end table
+
+If the pager is enabled, and Term receives more than a screenful
+of output since your last input, Term will enter More break mode.
+This is indicated by @samp{**MORE**} in the mode-line.
+Type a @kbd{Space} to display the next screenful of output.
+Type @kbd{?} to see your other options.  The interface is similar
+to the Unix @code{more} program.
+
 @node Remote Host
 @subsection Remote Host Shell
 @cindex remote host
@@ -905,7 +1015,37 @@
 @cindex Telnet
 @cindex Rlogin
 
-  Emacs provides two commands for logging in to another computer
+  You can login to a remote computer, using whatever commands you
+would from a regular terminal (e.g.@: using the @code{telnet} or
+@code{rlogin} commands), from a Term window.
+
+A program that asks you for a password will normally suppress
+echoing of the password, so the password will not show up in the buffer.
+This will happen just as if you were using a real terminal, if
+the buffer is in char mode.  If it is in line mode, the password
+will be temporarily visible, but will be erased when you hit return.
+(This happens automatically; there is no special password processing.)
+
+When you log in to a different machine, you need to specify the
+type of terminal your using.  Terminal types @samp{ansi}
+or @samp{vt100} will work on most systems.
+
+@c   If you are talking to a Bourne-compatible
+@c shell, and your system understands the @code{TERMCAP} variable,
+@c you can use the command @kbd{M-x shell-send-termcap}, which
+@c sends a string specifying the terminal type and size.
+@c (This command is also useful after the window has changed size.)
+
+@c You can of course run @samp{gdb} on that remote computer.  One useful
+@c trick:  If you invoke gdb with the @code{--fullname} option,
+@c it will send special commands to Emacs that will cause Emacs to
+@c pop up the source files you're debugging.  This will work
+@c whether or not gdb is running on a different computer than Emacs,
+@c as long as Emacs can access the source files specified by gdb.
+
+You cannot log into to a remove comuter using the Shell mode.
+@c (This will change when Shell is re-written to use Term.)
+Instead, Emacs provides two commands for logging in to another computer
 and communicating with it through an Emacs buffer.
 
 @table @kbd
@@ -1063,7 +1203,7 @@
 as you like to edit the files in Emacs.)
 
 
-@node Hardcopy, Postscript, Emacs Server, Top
+@node Hardcopy, PostScript, Emacs Server, Top
 @section Hardcopy Output
 @cindex hardcopy
 
@@ -1117,43 +1257,45 @@
 @code{lpr-add-switches} should be @code{nil} if your printer program is
 not compatible with @code{lpr}.
 
-@node Postscript, Postscript Variables, Hardcopy, Top
-@section Postscript Hardcopy
+@node PostScript, PostScript Variables, Hardcopy, Top
+@section PostScript Hardcopy
 
-  These commands convert buffer contents to Postscript,
+  These commands convert buffer contents to PostScript,
 either printing it or leaving it in another Emacs buffer.
 
 @table @kbd
 @item M-x ps-print-buffer
-Print hardcopy of the current buffer in Postscript form.
+Print hardcopy of the current buffer in PostScript form.
 @item M-x ps-print-region
-Print hardcopy of the current region in Postscript form.
+Print hardcopy of the current region in PostScript form.
 @item M-x ps-print-buffer-with-faces
-Print hardcopy of the current buffer in Postscript form, showing the
-faces used in the text by means of Postscript features.
+Print hardcopy of the current buffer in PostScript form, showing the
+faces used in the text by means of PostScript features.
 @item M-x ps-print-region-with-faces
-Print hardcopy of the current region in Postscript form, showing the
+Print hardcopy of the current region in PostScript form, showing the
 faces used in the text.
 @item M-x ps-spool-buffer
-Generate Postscript for the current buffer text.
+Generate PostScript for the current buffer text.
 @item M-x ps-spool-region
-Generate Postscript for the current region.
+Generate PostScript for the current region.
 @item M-x ps-spool-buffer-with-faces
-Generate Postscript for the current buffer, showing the faces used.
+Generate PostScript for the current buffer, showing the faces used.
 @item M-x ps-spool-region-with-faces
-Generate Postscript for the current region, showing the faces used.
+Generate PostScript for the current region, showing the faces used.
+@item M-x handwrite
+Generates/prints PostScript for the current buffer as if handwritten.
 @end table
 
 @findex ps-print-region
 @findex ps-print-buffer
 @findex ps-print-region-with-faces
 @findex ps-print-buffer-with-faces
-  The Postscript commands, @code{ps-print-buffer} and
-@code{ps-print-region}, print buffer contents in Postscript form.  One
+  The PostScript commands, @code{ps-print-buffer} and
+@code{ps-print-region}, print buffer contents in PostScript form.  One
 command prints the entire buffer; the other, just the region.  The
 corresponding @samp{-with-faces} commands,
 @code{ps-print-buffer-with-faces} and @code{ps-print-region-with-faces},
-use Postscript features to show the faces (fonts and colors) in the text
+use PostScript features to show the faces (fonts and colors) in the text
 properties of the text being printed.
 
   If you are using a color display, you can print a buffer of program
@@ -1165,20 +1307,26 @@
 @findex ps-spool-region-with-faces
 @findex ps-spool-buffer-with-faces
   The commands whose names have @samp{spool} instead of @samp{print}
-generate the Postscript output in an Emacs buffer instead of sending
+generate the PostScript output in an Emacs buffer instead of sending
 it to the printer.
 
+@findex handwrite
+@cindex handwriting
+@kbd{M-x handwrite} is more frivolous.  It generates a PostScript
+rendition of the current buffer as a cursive handwritten document.  It
+can be customized in group @code{handwrite}.
+
 @ifinfo
   The following section describes variables for customizing these commands.
 @end ifinfo
 
-@node Postscript Variables, Sorting, Postscript, Top
-@section Variables for Postscript Hardcopy
+@node PostScript Variables, Sorting, PostScript, Top
+@section Variables for PostScript Hardcopy
 
 @vindex ps-lpr-command
 @vindex ps-lpr-switches
 @vindex ps-printer-name
-  All the Postscript hardcopy commands use the variables
+  All the PostScript hardcopy commands use the variables
 @code{ps-lpr-command} and @code{ps-lpr-switches} to specify how to print
 the output.  @code{ps-lpr-command} specifies the command name to run,
 @code{ps-lpr-switches} specifies command line options to use, and
@@ -1227,7 +1375,7 @@
   Many other customization variables for these commands are defined and
 described in the Lisp file @file{ps-print.el}.
 
-@node Sorting, Narrowing, Postscript Variables, Top
+@node Sorting, Narrowing, PostScript Variables, Top
 @section Sorting Text
 @cindex sorting
 
@@ -1683,11 +1831,31 @@
 @cindex other editors
 @cindex EDT
 @cindex vi
+@cindex CRiSP
+@cindex Brief
+@cindex PC keybindings
+@cindex scrolling all windows
+@cindex PC selecion
+@cindex Motif keybindings
+@cindex Macintosh keybindings
+@cindex WordStar
 
   GNU Emacs can be programmed to emulate (more or less) most other
 editors.  Standard facilities can emulate these:
 
 @table @asis
+@item CRiSP/Brief (PC editor)
+@findex crisp-mode
+@vindex crisp-override-meta-x
+@findex scroll-all-mode
+Turn on keybindings to emulate the CRiSP/Brief editor with @kbd{M-x
+crisp-mode}.  Note that this rebinds @kbd{M-x} to exit Emacs unless you
+change the user option @code{crisp-override-meta-x}.  You can also load
+the @code{scroll-all} package to emulate CRiSP's scroll-all feature
+(scrolling all windows together).  Do thsi either with @kbd{M-x
+scroll-all-mode} or set the user option @code{crisp-load-scroll-all} to
+load it along with @code{crisp-mode}.
+
 @item EDT (DEC VMS editor)
 @findex edt-emulation-on
 @findex edt-emulation-off
@@ -1699,6 +1867,37 @@
 are done in the global keymap, so there is no problem switching
 buffers or major modes while in EDT emulation.
 
+@item `PC' bindings
+@findex pc-bindings-mode
+@kbd{M-x pc-bindings-mode} sets up certain key bindings for `PC
+compatibility'---what people are often used to on PCs---as follows:
+@kbd{Delete} and its variants) delete forward instead of backward,
+@kbd{C-Backspace} kills backward a word (as @kbd{C-Delete} normally
+would), @kbd{M-Backspace} does undo, @kbd{Home} and @kbd{End} move to
+beginning and end of line, @kbd{C-Home} and @kbd{C-End} move to
+beginning and end of buffer and @kbd{C-Escape} does @code{list-buffers}.
+
+@item PC selection mode
+@findex pc-selection-mode
+@kbd{M-x pc-selction-mode} emulates the mark, copy, cut and paste
+look-and-feel of Motif programs (which is the same as the Macintosh GUI
+and MS-Windows).  It makes the keybindings of PC mode and also modifies
+the bindings of the cursor keys and the @kbd{next}, @kbd{prior},
+@kbd{home} and @kbd{end} keys.  It does not provide the full set of CUA
+keybindings---the fundamental Emacs keys @kbd{C-c}, @kbd{C-v} and
+@kbd{C-x} are not rebound.
+
+The standard keys for moving around (@kbd{right}, @kbd{left}, @kbd{up},
+@kbd{down}, @kbd{home}, @kbd{end}, @kbd{prior}, @kbd{next}, called
+``move-keys'') will always de-activate the mark.  Using @kbd{Shift}
+together with the ``move keys'' activates the region over which they
+move.  The copy, cut and paste functions (as in many other programs)
+operate on the active region, bound to @kbd{C-insert}, @kbd{S-delete}
+and @kbd{S-insert} respectively.
+
+The @code{s-region} package provides similar, but less complete,
+facilities.
+
 @item vi (Berkeley editor)
 @findex viper-mode
 Viper is the newest emulator for vi.  It implements several levels of
@@ -1736,6 +1935,11 @@
 not use it.
 
 @inforef{Top, VIP, vip}, for full information.
+
+@item WordStar (old wordprocessor)
+@findex wordstar-mode
+@kbd{M-x wordstar-mode} provides a major mode with WordStar-like
+keybindings.
 @end table
 
 @node Dissociated Press, Amusements, Emulation, Top
@@ -1802,7 +2006,6 @@
 @findex hanoi
 @findex yow
 @findex gomoku
-@findex mpuz
 @cindex tower of Hanoi
 
   If you are a little bit bored, you can try @kbd{M-x hanoi}.  If you are
@@ -1815,18 +2018,41 @@
 
 @findex blackbox
 @findex mpuz
+@findex 5x5
 @cindex puzzles
-  @kbd{M-x blackbox} and @kbd{M-x mpuz} are two kinds of puzzles.
+  @kbd{M-x blackbox}, @kbd{M-x mpuz} and @kbd{M-x 5x5} are kinds of puzzles.
 @code{blackbox} challenges you to determine the location of objects
 inside a box by tomography.  @code{mpuz} displays a multiplication
 puzzle with letters standing for digits in a code that you must
 guess---to guess a value, type a letter and then the digit you think it
-stands for.
+stands for.  The aim of @code{5x5} is to fill in all the squares.
 
 @findex dunnet
   @kbd{M-x dunnet} runs an adventure-style exploration game, which is
 a bigger sort of puzzle.
 
+@findex lm
+@cindex landmark game
+@kbd{M-x lm} runs a relatively non-participatory game in which a robot
+attempts to maneuver towards a tree at the center of the window based on
+unique olfactory cues from each of the four directions.
+
+@findex life
+@cindex Life
+@kbd{M-x life} runs Conway's `Life' cellular automaton.
+
+@findex solitaire
+@cindex solitaire
+@kbd{M-x solitaire} plays a game of solitaire in which you jump pegs
+across other pegs.
+
+@findex tetris
+@cindex Tetris
+@kbd{M-x tetris} runs an implementation of the well-known Tetris game.
+@findex snake
+@cindex Snake
+Likewise, @kbd{M-x snake} provides an implementation of Snake.
+
   When you are frustrated, try the famous Eliza program.  Just do
 @kbd{M-x doctor}.  End each input by typing @key{RET} twice.