Mercurial > emacs

--- a/man/ChangeLog	Tue Jun 29 06:39:03 2004 +0000
+++ b/man/ChangeLog	Tue Jun 29 12:09:45 2004 +0000
@@ -1,3 +1,8 @@
+2004-06-29  Jesper Harder  <harder@ifa.au.dk>
+
+	* ses.texi, viper.texi, search.texi, flymake.texi, faq.texi:
+	* eshell.texi, ediff.texi, calendar.texi: Markup fixes.
+
 2004-06-25  Richard M. Stallman  <rms@gnu.org>

 	* search.texi (Regexp Replace): Rewrite description of \# \, and \?.
--- a/man/calendar.texi	Tue Jun 29 06:39:03 2004 +0000
+++ b/man/calendar.texi	Tue Jun 29 12:09:45 2004 +0000
@@ -1332,7 +1332,7 @@
 minutes beforehand that that appointment is pending.  Emacs alerts you
 to the appointment by displaying a message in your chosen format, as
 specified by the variable @code{appt-display-format}.  If the value
-of @code{appt-audible} is non-nil, an audible reminder is also given.
+of @code{appt-audible} is non-@code{nil}, an audible reminder is also given.

 @findex appt-activate
   To enable appointment notification, call the function
--- a/man/ediff.texi	Tue Jun 29 06:39:03 2004 +0000
+++ b/man/ediff.texi	Tue Jun 29 12:09:45 2004 +0000
@@ -1067,7 +1067,7 @@
 @vindex ediff-autostore-merges
 For group sessions created to merge files, Ediff can store all merges
 automatically in a directory.  The user is asked to specify such directory
-if the value of @code{ediff-autostore-merges} is non-nil.  If the value is
+if the value of @code{ediff-autostore-merges} is non-@code{nil}.  If the value is
 @code{nil}, nothing is done to the merge buffers---it will be the user's
 responsibility to save them.  If the value is @code{t}, the user will be
 asked where to save the merge buffers in all merge jobs, even those that do
@@ -2338,11 +2338,11 @@
 @item ediff-buffer-C
 In three-way comparisons, this is the third buffer being compared.
 In merging, this is the merge buffer.
-In two-way comparison, this variable is nil.
+In two-way comparison, this variable is @code{nil}.

 @item ediff-window-A
 The window displaying buffer A.  If buffer A is not visible, this variable
-is nil or it may be a dead window.
+is @code{nil} or it may be a dead window.

 @item ediff-window-B
 The window displaying buffer B.
@@ -2351,9 +2351,9 @@
 The window displaying buffer C, if any.

 @item ediff-control-frame
-A dedicated frame displaying the control buffer, if it exists.
-It is non-nil only if Ediff uses the multiframe display, i.e., when the
-control buffer is in its own frame.
+A dedicated frame displaying the control buffer, if it exists.  It is
+non-@code{nil} only if Ediff uses the multiframe display, i.e., when
+the control buffer is in its own frame.
 @end table

 @node Credits, Index, Customization, Top
--- a/man/eshell.texi	Tue Jun 29 06:39:03 2004 +0000
+++ b/man/eshell.texi	Tue Jun 29 12:09:45 2004 +0000
@@ -846,7 +846,7 @@
 @item Error if a glob doesn't expand due to a predicate

 An error should be generated only if @code{eshell-error-if-no-glob} is
-non-nil.
+non-@code{nil}.

 @item @samp{(+ RET SPC TAB} does not cause @code{indent-according-to-mode} to occur
--- a/man/eudc.texi	Tue Jun 29 06:39:03 2004 +0000
+++ b/man/eudc.texi	Tue Jun 29 12:09:45 2004 +0000
@@ -475,7 +475,7 @@
 the list is of the form @code{(@var{name} . @var{func})} where
 @var{name} is a lowercased string naming a directory attribute
 (translated according to @code{eudc-user-attribute-names-alist} if
-@code{eudc-use-raw-directory-names} is non-nil) and @var{func} a
+@code{eudc-use-raw-directory-names} is non-@code{nil}) and @var{func} a
 function that will be passed the corresponding attribute values for
 display.
 @end defvar
--- a/man/faq.texi	Tue Jun 29 06:39:03 2004 +0000
+++ b/man/faq.texi	Tue Jun 29 12:09:45 2004 +0000
@@ -2367,7 +2367,7 @@

 Each menu title (e.g., @samp{File}, @samp{Edit}, @samp{Buffers})
 represents a local or global keymap.  Selecting a menu title with the
-mouse displays that keymap's non-nil contents in the form of a menu.
+mouse displays that keymap's non-@code{nil} contents in the form of a menu.

 So to add a menu option to an existing menu, all you have to do is add a
 new definition to the appropriate keymap.  Adding a @samp{Forward Word}
@@ -3173,7 +3173,7 @@
 feature.

 Emacs 18 allowed this feature by default; users could disable it by
-setting the variable @code{inhibit-local-variables} to a non-nil value.
+setting the variable @code{inhibit-local-variables} to a non-@code{nil} value.

 As of Emacs 19, Emacs has a list of local variables that create a
 security risk.  If a file tries to set one of them, it asks the user to
--- a/man/flymake.texi	Tue Jun 29 06:39:03 2004 +0000
+++ b/man/flymake.texi	Tue Jun 29 12:09:45 2004 +0000
@@ -542,7 +542,7 @@

 Syntax check is considered possible if there's an entry in
 @code{flymake-allowed-file-name-masks} matching buffer's filename and
-its @code{init-function} returns non-nil value.
+its @code{init-function} returns non-@code{nil} value.

 Two syntax check modes are distinguished:
--- a/man/search.texi	Tue Jun 29 06:39:03 2004 +0000
+++ b/man/search.texi	Tue Jun 29 12:09:45 2004 +0000
@@ -231,18 +231,18 @@

   Vertical scrolling during incremental search can be enabled by
 setting the customizable variable @code{isearch-allow-scroll} to a
-non-nil value.
+non-@code{nil} value.

   You can then use the vertical scroll-bar or certain keyboard
 commands such as @kbd{@key{PRIOR}} (@code{scroll-down}),
 @kbd{@key{NEXT}} (@code{scroll-up}) and @kbd{C-l} (@code{recenter})
 within the search, thus letting you see more of the text near the
 current match.  You must run these commands via their key sequences to
-stay in the search - typing M-x @var{comand-name} will always
+stay in the search---typing M-x @var{comand-name} will always
 terminate a search.

   You can give prefix arguments to these commands in the usual way.
-The current match cannot be scrolled out of the window - this is
+The current match cannot be scrolled out of the window---this is
 intentional.

   Several other commands, such as @kbd{C-x 2}
@@ -847,7 +847,7 @@
 @vindex isearch-allow-scroll

 Scrolling, etc., during incremental search is enabled by setting the
-customizable variable @code{isearch-allow-scroll} to a non-nil value.
+customizable variable @code{isearch-allow-scroll} to a non-@code{nil} value.

 @c See Subject: Info file:  How do I get an itemized list without blank lines?
 @c Date: Sat, 12 Apr 2003 09:45:31 +0000  in gnu.emacs.help
@@ -893,7 +893,7 @@

 You should only thus configure commands which are ``safe'': i.e., they
 won't leave emacs in an inconsistent state when executed within a
-search - that is to say, the following things may be changed by a
+search---that is to say, the following things may be changed by a
 command only temporarily, and must be restored before the command
 finishes:

@@ -913,7 +913,7 @@
 window's size, or create or delete other windows and frames.

 Note that an attempt by a command to scroll the text
-@emph{horizontally} won't work, although it will do no harm - any such
+@emph{horizontally} won't work, although it will do no harm---any such
 scrolling will be overriden and nullified by the display code.

 @node Replace, Other Repeating Search, Configuring Scrolling, Search
--- a/man/ses.texi	Tue Jun 29 06:39:03 2004 +0000
+++ b/man/ses.texi	Tue Jun 29 12:09:45 2004 +0000
@@ -251,8 +251,8 @@
 (right-aligned) or list of one string (left-aligned).  While typing in
 a lambda, you can use @kbd{M-TAB} to complete the names of symbols.

-Each cell has a printer.  If nil, the column-printer for the cell's
-column is used.  If that is also nil, the default-printer for the
+Each cell has a printer.  If @code{nil}, the column-printer for the cell's
+column is used.  If that is also @code{nil}, the default-printer for the
 spreadsheet is used.

 @table @kbd
@@ -273,7 +273,7 @@

 The standard printers are suitable only for cells, not columns or
 default, because they format the value using the column-printer (or
-default-printer if nil) and then center the result:
+default-printer if @code{nil}) and then center the result:

 @table @code
 @item ses-center
@@ -296,7 +296,7 @@
 @node Clearing cells, Copy/cut/paste, Printer functions, The Basics
 @section Clearing cells

-These commands set both formula and printer to nil:
+These commands set both formula and printer to @code{nil}:

 @table @kbd
 @item DEL
@@ -331,7 +331,7 @@
 @item C-w
 @itemx [cut]
 @itemx [S-delete]
-The cut functions do not actually delete rows or columns - they copy
+The cut functions do not actually delete rows or columns---they copy
 and then clear (@code{ses-kill-override}).

 @item C-y
@@ -537,7 +537,7 @@

 @table @code
 @item (ses-delete-blanks &rest @var{args})
-Returns a list from which all blank cells (value is either nil or
+Returns a list from which all blank cells (value is either @code{nil} or
 '*skip*) have been deleted.

 @item (ses+ &rest @var{args})
@@ -561,10 +561,10 @@
 @end itemize

 If the result from the printer function is too wide for the cell and
-the following cell is nil, the result will spill over into the
+the following cell is @code{nil}, the result will spill over into the
 following cell.  Very wide results can spill over several cells.  If
 the result is too wide for the available space (up to the end of the
-row or the next non-nil cell), the result is truncated if the cell's
+row or the next non-@code{nil} cell), the result is truncated if the cell's
 value is a string, or replaced with hash marks otherwise.

 SES could get confused by printer results that contain newlines or
--- a/man/viper.texi	Tue Jun 29 06:39:03 2004 +0000
+++ b/man/viper.texi	Tue Jun 29 12:09:45 2004 +0000
@@ -1312,7 +1312,7 @@
 hit @kbd{C-x} followed by @kbd{2}, then the current window will be split
 into 2.  Except for novice users, @kbd{C-c} is also set to execute an Emacs
 command from the current major mode.  @key{ESC} will do the same, if you
-configure @key{ESC} as Meta by setting @code{viper-no-multiple-ESC} to nil
+configure @key{ESC} as Meta by setting @code{viper-no-multiple-ESC} to @code{nil}
 in @file{.viper}.  @xref{Customization}.  @kbd{C-\} in Insert, Replace, or Vi
 states will make Emacs think @kbd{Meta} has been hit.@refill
 @item \
@@ -1742,7 +1742,7 @@

 Setting this variable too high may slow down your typing.  Setting it too
 low may make it hard to type macros quickly enough.
-@item viper-translate-all-ESC-keysequences t on tty, nil on windowing display
+@item viper-translate-all-ESC-keysequences @code{t} on tty, @code{nil} on windowing display
 Normally, Viper lets Emacs translate only those ESC key sequences that are
 defined in the low-level key-translation-map or function-key-map, such as those
 emitted by the arrow and function keys. Other sequences, e.g., @kbd{\\e/}, are
@@ -1753,7 +1753,7 @@
 This permits you to use @kbd{ESC} as a meta key in insert mode. For instance,
 hitting @kbd{ESC x} fast would have the effect of typing @kbd{M-x}.
 If your dumb terminal is not so dumb and understands the meta key, then you
-probably will be better off setting this variable to nil. Try and see which
+probably will be better off setting this variable to @code{nil}. Try and see which
 way suits you best.
 @item viper-ex-style-motion t
 Set this to @code{nil}, if you want @kbd{l,h} to cross
@@ -1764,8 +1764,8 @@
 at the beginning of a line in Insert state, @key{X} and @key{x} to delete
 characters across lines in Vi command state, etc.
 @item viper-ESC-moves-cursor-back t
-It t, cursor moves back 1 character when switching from insert state to vi
-state.  If nil, the cursor stays where it was before the switch.
+It @code{t}, cursor moves back 1 character when switching from insert state to vi
+state.  If @code{nil}, the cursor stays where it was before the switch.
 @item viper-always t
 @code{t} means: leave it to Viper to decide when a buffer must be brought
 up in Vi state,
@@ -1873,17 +1873,17 @@
 insert state.
 @item viper-replace-region-end-delimiter "$"
 A string used to mark the end of replacement regions.  It is used only on
-TTYs or if @code{viper-use-replace-region-delimiters} is non-nil.
+TTYs or if @code{viper-use-replace-region-delimiters} is non-@code{nil}.
 @item viper-replace-region-start-delimiter  ""
 A string used to mark the beginning of replacement regions.  It is used
-only on TTYs or if @code{viper-use-replace-region-delimiters} is non-nil.
+only on TTYs or if @code{viper-use-replace-region-delimiters} is non-@code{nil}.
 @item viper-use-replace-region-delimiters
-If non-nil, Viper will always use @code{viper-replace-region-end-delimiter} and
+If non-@code{nil}, Viper will always use @code{viper-replace-region-end-delimiter} and
 @code{viper-replace-region-start-delimiter} to delimit replacement regions,
 even on color displays (where this is unnecessary).  By default, this
-variable is non-nil only on TTYs or monochrome displays.
+variable is non-@code{nil} only on TTYs or monochrome displays.
 @item viper-allow-multiline-replace-regions t
-If non-nil, multi-line text replacement regions, such as those produced by
+If non-@code{nil}, multi-line text replacement regions, such as those produced by
 commands @kbd{c55w}, @kbd{3C}, etc., will stay around until the user exits
 the replacement mode.  In this variable is set to @code{nil}, Viper will
 emulate the standard Vi behavior, which supports only intra-line
@@ -2390,7 +2390,7 @@

 To unbind the macros `//' and `///' for a major mode where you feel they
 are undesirable, execute @code{viper-set-emacs-state-searchstyle-macros} with a
-non-nil argument.  This can be done either interactively, by supplying a
+non-@code{nil} argument.  This can be done either interactively, by supplying a
 prefix argument, or by placing
 @example
 (viper-set-emacs-state-searchstyle-macros 'undefine)
@@ -3360,7 +3360,7 @@
 Find the next bracket/parenthesis/brace and go to its match.
 By default, Viper ignores brackets/parentheses/braces that occur inside
 parentheses.  You can change this by setting
-@code{viper-parse-sexp-ignore-comments} to nil in your @file{.viper} file.
+@code{viper-parse-sexp-ignore-comments} to @code{nil} in your @file{.viper} file.
 This option can also be toggled interactively if you quickly hit @kbd{%%%}.

 This latter feature is implemented as a vi-style keyboard macro.  If you