changeset 8674:bcfd4c7eecb0

*** empty log message ***
author David J. MacKenzie <djm@gnu.org>
date Wed, 31 Aug 1994 14:31:25 +0000
parents 6d1d308ff12d
children 1fe413b0a916
files configure.in
diffstat 1 files changed, 43 insertions(+), 106 deletions(-) [+]
line wrap: on
line diff
--- a/configure.in	Wed Aug 31 04:14:02 1994 +0000
+++ b/configure.in	Wed Aug 31 14:31:25 1994 +0000
@@ -33,13 +33,13 @@
 	    n | no )		val=no  ;;
 	    l | lu | luc | luci | lucid )	val=lucid ;;
 	    a | at | ath | athe | athena )	val=athena ;;
-# These don't currently work.
-#	    m | mo | mot | moti | motif )	val=motif ;;
-#	    o | op | ope | open | open- | open-l | open-lo \
-#		| open-loo | open-look )	val=open-look ;;
+dnl These don't currently work.
+dnl	    m | mo | mot | moti | motif )	val=motif ;;
+dnl	    o | op | ope | open | open- | open-l | open-lo \
+dnl		| open-loo | open-look )	val=open-look ;;
 	    * )
-[#] AC_MSG_ERROR([the \`--with-x-toolkit' option is supposed to have a value
-[#]which is \`yes', \`no', \`lucid', \`athena', \`motif' or \`open-look'.])
+dnl AC_MSG_ERROR([the \`--with-x-toolkit' option is supposed to have a value
+dnl which is \`yes', \`no', \`lucid', \`athena', \`motif' or \`open-look'.])
 AC_MSG_ERROR([the \`--with-x-toolkit' option is supposed to have a value
 which is \`yes', \`no', \`lucid', or \`athena'.
 Currently, \`yes', \`athena' and \`lucid' are synonyms.])
@@ -49,17 +49,14 @@
 ])
 AC_ARG_WITH(gcc,
 [  --with-gcc              Use GCC to compile Emacs])
-AC_ARG_ENABLE(in-place,
-[  --enable-in-place       Use libraries and data files directly out of the 
-                          source tree])
-AC_ARG_ENABLE(single-tree,
-[  --enable-single-tree    Create a directory tree at DIR which looks like:
-                          .../DIR/bin/CONFIGNAME (emacs, etags, etc.)
-                          .../DIR/bin/CONFIGNAME/etc (movemail, etc.)
-                          .../DIR/common/lisp  (emacs' lisp files)
-                          .../DIR/common/site-lisp (local lisp files)
-                          .../DIR/common/lib (DOC, TUTORIAL, etc.)
-                          .../DIR/common/lock (lockfiles)])
+dnl AC_ARG_ENABLE(single-tree,
+dnl [  --enable-single-tree    Create a directory tree at DIR which looks like:
+dnl                           .../DIR/bin/CONFIGNAME (emacs, etags, etc.)
+dnl                           .../DIR/bin/CONFIGNAME/etc (movemail, etc.)
+dnl                           .../DIR/common/lisp  (emacs' lisp files)
+dnl                           .../DIR/common/site-lisp (local lisp files)
+dnl                           .../DIR/common/lib (DOC, TUTORIAL, etc.)
+dnl                           .../DIR/common/lock (lockfiles)])
 
 #### Make srcdir absolute, if it isn't already.  It's important to
 #### avoid running the path through pwd unnecessary, since pwd can
@@ -840,82 +837,32 @@
 dnl other checks for UNIX variants
 
 #### Choose a window system.
-AC_MSG_CHECKING(for specified window system)
 
-window_system=''
-case "${with_x}" in
-  yes ) window_system=${window_system}x11 ;;
-  no ) window_system=${window_system}none ;;
-esac
-
-case "${window_system}" in
-  .* ) ;;
-  * )
-    case "${with_x11}" in
-      yes ) window_system=x11 ;;
-      no ) window_system=none ;;
-    esac
-    case "${with_x10}" in
-      yes ) window_system=x10 ;;
-      no ) window_system=none ;;
-    esac ;;
-esac
-
-case "${window_system}" in
-  "none" | "x11" | "x10" ) ;;
-  "" )
-    # --x-includes or --x-libraries implies --with-x11.
-    if test "${x_includes}" != NONE || test "${x_libraries}" != NONE; then
-      window_system=x11
+case "${with_x10}" in
+  yes ) window_system=x10 ;;
+  no ) window_system=none ;;
+  *) test -n "$with_x11" && with_x="$with_x11"
+    AC_FIND_X
+    if test "$no_x" = yes; then
+      window_system=none
     else
-      # If the user didn't specify a window system and we found X11, use it.
-      if test -r /usr/lib/libX11.a \
-	 -o -d /usr/include/X11 \
-         -o -d /usr/X386/include \
-	 -o -d ${x_includes}/X11 ; then
-        window_system=x11
-      fi
-    fi
-  ;;
-  * )
-    AC_MSG_ERROR(Don't specify a window system more than once.)
-  ;;
-esac
-
-AC_MSG_RESULT(${window_system})
-
-case "${window_system}" in
-  "" | "x11" )
-    ### If the user hasn't specified where we should find X, try
-    ### letting Autoconf figure that out.
-    if test "${x_includes}" = NONE && test "${x_libraries}" = NONE; then
-      AC_FIND_X
-    fi
-    if test "${x_includes}" != NONE || test "${x_libraries}" != NONE; then
       window_system=x11
     fi
   ;;
 esac
 
-test -z "${window_system}" && window_system=none
-
 test "${x_libraries}" != NONE && LD_SWITCH_X_SITE="-L${x_libraries}"
 test "${x_libraries}" != NONE && LD_SWITCH_X_SITE_AUX="-R${x_libraries}"
 test "${x_includes}" != NONE && C_SWITCH_X_SITE="-I${x_includes}"
 
-# Avoid forcing the search of /usr/include before fixed include files.
-if test "$C_SWITCH_X_SITE" = "-I/usr/include"; then
-   C_SWITCH_X_SITE=" "
-fi
-
 case "${window_system}" in
   x11 )
     HAVE_X_WINDOWS=yes
     HAVE_X11=yes
     case "${with_x_toolkit}" in
       athena | lucid ) USE_X_TOOLKIT=LUCID ;;	
-      motif ) USE_X_TOOLKIT=MOTIF ;;	
-      open-look ) USE_X_TOOLKIT=OPEN_LOOK ;;	
+dnl      motif ) USE_X_TOOLKIT=MOTIF ;;	
+dnl      open-look ) USE_X_TOOLKIT=OPEN_LOOK ;;	
       * ) USE_X_TOOLKIT=none ;;
     esac
   ;;
@@ -1223,36 +1170,26 @@
   AC_DEFINE(LISP_FLOAT_TYPE)
 fi
 
-# ====================== Developer's configuration =======================
-
-# The following assignments make sense if you're running Emacs on a single
-# machine, one version at a time, and  you want changes to the lisp and etc
-# directories in the source tree to show up immediately in your working
-# environment.  It saves a great deal of disk space by not duplicating the
-# lisp and etc directories.
-
-if test "$enable_in_place" = "yes"; then
-   lispdir='${srcdir}/lisp'
-   locallisppath='${srcdir}/site-lisp'
-   etcdir='${srcdir}/etc'
-   lockdir='${srcdir}/lock'
-   # We used to make archlibdir and docdir absolute,
-   # but that caused trouble with automounters.
-   archlibdir='${srcdir}/lib-src'
-   docdir='${srcdir}/etc'
-   infodir='${srcdir}/info'
-elif test "$enable_single_tree" = "yes"; then
-   bindir='${exec_prefix}/bin/${configuration}'
-   datadir='${prefix}/common'
-   statedir='${prefix}/common'
-   libdir='${bindir}'
-   lispdir='${prefix}/common/lisp'
-   locallisppath='${prefix}/common/site-lisp'
-   lockdir='${prefix}/common/lock'
-   archlibdir='${libdir}/etc'
-   etcdir='${prefix}/common/data'
-   docdir='${prefix}/common/data'
-fi
+dnl # ====================== Developer's configuration =======================
+dnl 
+dnl # The following assignments make sense if you're running Emacs on a single
+dnl # machine, one version at a time, and  you want changes to the lisp and etc
+dnl # directories in the source tree to show up immediately in your working
+dnl # environment.  It saves a great deal of disk space by not duplicating the
+dnl # lisp and etc directories.
+dnl 
+dnl if test "$enable_single_tree" = "yes"; then
+dnl    bindir='${exec_prefix}/bin/${configuration}'
+dnl    datadir='${prefix}/common'
+dnl    statedir='${prefix}/common'
+dnl    libdir='${bindir}'
+dnl    lispdir='${prefix}/common/lisp'
+dnl    locallisppath='${prefix}/common/site-lisp'
+dnl    lockdir='${prefix}/common/lock'
+dnl    archlibdir='${libdir}/etc'
+dnl    etcdir='${prefix}/common/data'
+dnl    docdir='${prefix}/common/data'
+dnl fi
 
 #### Report on what we decided to do.
 echo "